homepage | billet specialties, inc. - please fill out all information … · 2015-03-23 · point...
TRANSCRIPT
WHEEL & SUSPENSION MEASURING GUIDE
Name:
Address:
City: State Zip
Daytime Phone:
Fax:
Year
Make
Model
Modifications
Manufacturer
FRONT SUSPENSIONFactory Aftermarket
Modifications
Factory Aftermarket
Manufacturer
REAR SUSPENSION
VEHICLE INFORMATION
Wheel Style
Size
Bolt Circle
Stud Size
FRONT WHEELS
Polished Backside Of Barrel ($50.00/wheel)
Chrome Valve Stems ($8.95/4-pack)
AVAILABLE OPTIONS
Factory Brakes Performance Brakes
2WD 4WD
Brakes
Manufacturer
Template Number
Disc Drum
Lug Nuts (Call for price)
Thin Wall Socket ($6.00)
Factory Brakes Performance Brakes
Size
Bolt Circle
Stud Size
REAR WHEELS
Brakes
Manufacturer
Template Number
Disc Drum
NEW WHEEL INFORMATION
ATTN:Billet Specialties Sales Representative
Please fill out all information on both sides of this sheet completely and fax to Billet Specialties. A Billet Specialties sales representative will contact you.
Fax To: Billet Specialties, Inc.
1 (708) 588-7181
Tech Line: 1 (708) 588-0505
RearWheel
FrontWheelCALIPER MEASUREMENT SECTION
[Rear]
[Rear]
Brake System Manufacturer:
Brake Part #: [Front]
Brake Template #: [Front]
Center of hub to lowestpoint on the caliper
Protrusion of caliper pastthe mount surface
Center of hub to highestpoint on the caliper
Measure from the center of hub to thehighest (E) and lowest (F) points on thecaliper that can interfere with wheel.
INNER FENDER
FENDER
INNER FENDER
FENDER
DriverSide
PassengerSide
Mounting surface to inside fender
Hub Diameter
Hub Length
Fender Height From Center Of Hub
Current Wheel Size
BackspaceBolt Pattern
Current Tire Size
FRONT WHEEL SECTION
obstruction frame sideMounting surface to first
DriverSide
PassengerSide
Mounting surface to inside fender
Hub Diameter
Hub Length
Fender Height From Center Of Hub
Current Wheel Size
BackspaceBolt Pattern
Current Tire Size
REAR WHEEL SECTION
obstruction frame sideMounting surface to first
Year Make
VEHICLE INFORMATION
Model
Name
Phone
Fax
Fax To: 1 (708) 588-7181
Email To:[email protected]
WHEEL & SUSPENSION MEASURING GUIDE
Billet Specialties, Inc. • 500 Shawmut Avenue • La Grange, Illinois 60526 • PH 708-588-0505 • Fax 708-588-7181 • www.billetspecialties.com
Billet Specialties, Inc. • Wheel & Wheel Accessory Price Guide • Volume #2778
WHEEL MEASURING INFORMATION & TERMINOLOGY
LUG NUT TORQUE SPECIFICATIONS MEASURING A RIM
MEASURING LUG PATTERN
MEASURING BRAKES / CALIPERS
TECH INFO
The following information can be used to gather measurements to ensure a proper fit for most applications.
From back side of the
top stud to the center
of the second stud.
From center of the top stud to center of the
second stud directly across.
5 LUG 6 LUG 8 LUG
Caliper Clearance - The amount of space available for a
brake caliper, measured from the mounting surface to the
backside of the wheel center.
Backspace - Measured from the mounting surface of the
wheel to the back edge of the rim.
Centerbore - The machined opening in the center of the
wheel that allows the hub to pass through.
Listed Rim Width - Measured from beadseat to beadseat.
Overall Width - Measured from outside edge to outside edge
of a rim and is 1” larger than the Listed Rim Width.
Example: 17x8 (listed) will have an overall width of 9”.
Stud Size Torque Rating Stud Size Torque Rating
7/16” 70-80 ft.lbs. 10mm 45-55 ft.lbs.
1/2” 75-85 ft.lbs. 12mm 75-85 ft.lbs.
9/16” 100-115 ft.lbs. 14mm 85-95 ft.lbs.
5/8” 125-135 ft.lbs. 16mm 125-150 ft.lbs.
WheelDiameter
Caliper Clearance
Hub Length
Listed Rim Width
Overall Width
Centerbore
Backspace
Brake HeightCenter of axle to top of caliper
Caliper ProtrusionPast Mounting Surface
Hub Diameter
Hub Length