honda owners site | tips, tools & benefits for honda owners -...
TRANSCRIPT
This manual should be considered a permanent part of the motorcycle and should remainwith the motorcycle when it is resold.
This publication includes the latest production information available before printing. HondaMotor Co., Ltd. reserves the right to make changes at any time without notice and withoutincurring any obligation.
No part of this publication may be reproduced without written permission.
The vehicle pictured on the front cover may not match your vehicle.
2006 Honda Motor Co., Ltd.
07/01/08 17:29:24 31MFJ600 0001
-
Introduction
Introduction
Congratulations on choosing your Hondamotorcycle.
When you own a Honda, you’re part of aworldwide family of satisfied customers
people who appreciate Honda’sreputation for building quality into everyproduct.
Before riding, take time to get acquaintedwith your motorcycle and how it works.To protect your investment, we urge youto take responsibility for keeping yourmotorcycle well maintained. Scheduledservice is a must, of course. But it’s just asimportant to observe the break-inguidelines, and perform all pre-ride andother periodic checks detailed in thismanual.
We also recommend that you read thisowner’s manual before you ride. It’s fullof facts, instructions, safety information,and helpful tips. To make it easy to use,the manual contains a detailed list oftopics at the beginning of each section,and both an in-depth table of contents andan index at the back of the book.
As you read this manual, you will findinformation that is preceded by a
symbol. This information isintended to help you avoid damage to yourHonda, other property, or the environment.
07/01/08 17:29:36 31MFJ600 0003
Introduction
Introduction
WARNING:
Read the Warranties Booklet (page )thoroughly so you understand thecoverages that protect your new Hondaand are aware of your rights andresponsibilities.
If you have any questions, or if you everneed special service or repairs, rememberthat your Honda dealer knows yourmotorcycle best and is dedicated to yourcomplete satisfaction.
Please report any change of address orownership to your Honda dealer so wewill be able to contact you concerningimportant production information.
This product contains oremits chemicals known to the State ofCalifornia to cause cancer and birthdefects or other reproductive harm.
California Proposition 65 Warning
You may also want to visit our website atwww.honda.com.
Happy riding!
225
07/01/08 17:29:44 31MFJ600 0004
A Few Words About Safety
Safety Messages
Safety Labels
Safety MessagesDANGER, WARNING, CAUTION
Your safety, and the safety of others, is very important. And operating this motorcycle safelyis an important responsibility.
To help you make informed decisions about safety, we have provided operating proceduresand other information on labels and in this manual. This information alerts you to potentialhazards that could hurt you or others.
Of course, it is not practical or possible to warn you about all hazards associated withoperating or maintaining a motorcycle. You must use your own good judgment.
You will find important safety information in a variety of forms, including:
–– on the motorcycle.
–– preceded by a safety alert symbol and one of three signal words:or .
These signal words mean:
07/01/08 17:29:49 31MFJ600 0005
You WILL be KILLED or SERIOUSLY HURT if youdon’t follow instructions.
You CAN be KILLED or SERIOUSLY HURT if you don’tfollow instructions.
You CAN be HURT if you don’t follow instructions.
A Few Words About Safety
Safety Messages
Safety Headings
Safety Section
Instructions
–– such as Important Safety Reminders or Important Safety Precautions.
–– such as Motorcycle Safety.
–– how to use this motorcycle correctly and safely.
This entire manual is filled with important safety information –– please read it carefully.
07/01/08 17:29:56 31MFJ600 0006
Contents
Contents
..............................Motorcycle Safety .
....................Instruments & Controls .
.....................................Before Riding .
................Basic Operation & Riding .
1
9
39
49
These pages give an overview of thecontents of your owner’s manual. The firstpage of each section lists the topicscovered in that section.
The importance of wearing a helmetand other protective gear, how to makesure you and your motorcycle are readyto ride, and important information aboutloading.
Important safety information youshould know, plus a look at the safety-related labels on your motorcycle.
The location and function of indicators,gauges, and controls on yourmotorcycle and operating instructionsfor various controls and features.
How to start and stop the engine, shiftgears, and brake. Also, ridingprecautions and important informationabout riding with a passenger or cargo.
07/01/08 17:30:06 31MFJ600 0007
Contents
Contents
........‘‘Reporting Safety Defects’’ .
Quick Reference
......................Servicing Your Honda .
......................................................Tips .
.......Taking Care of the Unexpected .
......................Technical Information .
.....................Consumer Information .
..............................Table of Contents .
....................................................Index .
65
163
169
199
221
231
232
238
Why your motorcycle needs regularmaintenance, what you need to knowbefore servicing your Honda, an ownermaintenance schedule, and instructionsfor specific maintenance andadjustment items.
How to store and transport yourmotorcycle and how to be anenvironmentally-responsible rider.
What to do if you have a flat tire, yourengine won’t start, etc.
ID numbers, technical specifications,and other technical facts.
Information on warranties, emissioncontrols, how to get Honda servicemanuals, and...
Sequential listing of topics in thisowner’s manual.
Handy facts about fuel, engine oil, tiresizes, and air pressures.
07/01/08 17:30:20 31MFJ600 0008
1
Motorcycle Safety
Motorcycle Safety
This section presents some of the mostimportant information andrecommendations to help you ride yourmotorcycle safely. Please take a fewmoments to read these pages. This sectionalso includes information about thelocation of safety labels on yourmotorcycle.
................Important Safety Information ..................Accessories & Modifications .
..........................................Safety Labels .
257
07/01/08 17:30:29 31MFJ600 0010
-
2
Important Safety Information
Motorcycle Safety
Always Wear a HelmetYour motorcycle can provide many yearsof service and pleasure if you takeresponsibility for your own safety andunderstand the challenges you can meetwhile riding.
There is much that you can do to protectyourself when you ride. You’ll find manyhelpful recommendations throughout thismanual. The following are a few that weconsider most important.
It’s a proven fact: helmets significantlyreduce the number and severity of headinjuries. So always wear an approvedmotorcycle helmet and make sure yourpassenger does the same. We alsorecommend that you wear eye protection,sturdy boots, gloves, and other protectivegear (page ).40
07/01/08 17:30:35 31MFJ600 0011
3
Important Safety Information
Motorcycle Safety
Make Yourself Easy to See
Take Time to Learn & Practice
Ride Defensively
You andYour Motorcycle: Riding Tips andPractice Guide,
Always pay attention to other vehiclesaround you, and do not assume that otherdrivers see you. Be prepared to stopquickly or make an evasive maneuver. Forother riding tips, see the booklet,
which came with yournew motorcycle (USA only).
Some drivers do not see motorcyclesbecause they are not looking for them. Tomake yourself more visible, wear brightreflective clothing, position yourself soother drivers can see you, signal beforeturning or changing lanes, and use yourhorn when it will help others notice you.
Even if you have ridden other motorcycles,take time to become familiar with howthis motorcycle works and handles.Practice in a safe area until you build yourskills and get accustomed to themotorcycle’s size and weight.
Because many accidents involveinexperienced or untrained riders, we urgeall riders to take a certified courseapproved by the Motorcycle SafetyFoundation (MSF). See page .
The most frequent motorcycle collisionhappens when a car turns left in front of amotorcycle. Another common situation isa car moving suddenly into your lane.
42
07/01/08 17:30:42 31MFJ600 0012
4
Important Safety Information
Motorcycle Safety
Ride within Your Limits Keep Your Honda in Safe Condition
Don’t Drink and Ride
Pushing limits is another major cause ofmotorcycle accidents. Never ride beyondyour personal abilities or faster thanconditions warrant. Remember thatalcohol, drugs, fatigue, and inattention cansignificantly reduce your ability to makegood judgments and ride safely.
It’s important to keep your motorcycleproperly maintained and in safe ridingcondition. To help avoid problems, inspectyour motorcycle before every ride andperform all recommended maintenance.Never exceed load limits (page ), anddo not modify your motorcycle (page )or install accessories that would makeyour motorcycle unsafe (page ).
Alcohol and riding don’t mix. Even onedrink can reduce your ability to respond tochanging conditions, and your reactiontime gets worse with every additionaldrink. So don’t drink and ride, and don’tlet your friends drink and ride either.
5
647
07/01/08 17:30:48 31MFJ600 0013
Improper accessories ormodifications can cause a crash inwhich you can be seriously hurt orkilled.
Follow all instructions in thisowner’s manual regardingaccessories and modifications.
5
Accessories
Accessories & Modifications
Motorcycle Safety
Modifying your motorcycle or using non-Honda accessories can make yourmotorcycle unsafe. Before you considermaking any modifications or adding anaccessory, be sure to read the followinginformation.
We strongly recommend that you use onlygenuine Honda accessories that have beenspecifically designed and tested for yourmotorcycle. Because Honda cannot test allother accessories, you must be personallyresponsible for proper selection,installation, and use of non-Hondaaccessories.Check with your Honda dealer forassistance and always follow theseguidelines:
Make sure the accessory does notobscure any lights, reduce groundclearance and lean angle, limitsuspension travel or steering travel, alteryour riding position, or interfere withoperating any controls. (cont’d)
07/01/08 17:30:56 31MFJ600 0014
6
Modifications
Accessories & Modifications
Motorcycle Safety
Do not add any electrical equipmentthat will exceed the motorcycle’selectrical system capacity (page ).A blown fuse can cause a loss of lightsor engine power (page ).Do not pull a trailer or sidecar with yourmotorcycle. This motorcycle was notdesigned for these attachments, andtheir use can seriously impair yourmotorcycle’s handling.
We strongly advise you not to remove anyoriginal equipment or modify yourmotorcycle in any way that would changeits design or operation. Such changescould seriously impair your motorcycle’shandling, stability, and braking, making itunsafe to ride.
Removing or modifying your lights,exhaust system, emission control system,or other equipment can also make yourmotorcycle illegal.
208
192
07/01/08 17:31:03 31MFJ600 0015
7
Safety Labels
Motorcycle Safety
Safety labels on your motorcycle either warn you of potential hazards that could causeserious injury or they provide important safety information. Read these labels carefully anddon’t remove them.
If a label comes off or becomes hard to read, contact your Honda dealer for a replacement.
07/01/08 17:31:13 31MFJ600 0016
9
Instruments & Controls
Instruments & Controls
This section shows the location of allgauges, indicators, and controls you wouldnormally use before or while riding yourmotorcycle.
The items listed on this page are describedin this section. Instructions for othercomponents are presented in other sectionsof this manual where they will be mostuseful.
(cont’d)
...........Operation Component Locations ................Gauges, Indicators & Displays .
..........................................Fuel Gauge ........................Multi-function Display .
...............Coolant Temperature Meter ........................................Speedometer .
...............Odometer/Tripmeter A & B .Changing the Speed, Mileage and
...............................Temperature Unit .......................................Digital Clock .
11142224252728
2931
07/01/08 17:31:48 31MFJ600 0018
10
Instruments & Controls
Instruments & Controls
................................Controls & Features ....................................Ignition Switch .
.........................................Start Button .............................Engine Stop Switch .
.................Headlight Dimmer Switch ..............................Turn Signal Switch .
........................................Horn Button .....................................RESET Button .
.........................................SEL Button .HESD (Honda Electronic Steering
..............................................Damper) .
343435353636373737
38
07/01/08 17:31:59 31MFJ600 0019
turn signal switch
clutch lever
headlight dimmerswitch
front brakelever
engine stopswitch
throttle grip
start buttonhorn button
ignition switch
11Instruments & Controls
Operation Component Locations
07/01/08 17:32:05 31MFJ600 0020
storage compartmentfor U-shaped lock
rear brake pedal
12 Instruments & Controls
Operation Component Locations
07/01/08 17:32:09 31MFJ600 0021
helmet holder
shift lever
13Instruments & Controls
Operation Component Locations
07/01/08 17:32:14 31MFJ600 0022
(2) (3) (5) (6)
(11) (10) (8)
(4)
(12) (9)
(1)
(7)(13)
(14)
14
Gauges, Indicators & Displays
Instruments & Controls
The gauges, indicators and displays onyour motorcycle keep you informed, alertyou to possible problems, and make yourriding safer and more enjoyable. Refer tothe gauges, indicators and displaysfrequently. Their functions are describedon the following pages.
(1) fuel gauge(2) left turn signal indicator(3) tachometer(4) tachometer red zone(5) right turn signal indicator(6) multi-function display(7) HESD indicator(8) PGM-FI malfunction indicator lamp
(MIL)(9) high coolant temperature indicator
(10) low oil pressure indicator(11) neutral indicator(12) high beam indicator(13) RESET button(14) SEL button
07/01/08 17:32:21 31MFJ600 0023
-
15
Gauges, Indicators & Displays
Instruments & Controls
LampCheck.
Lamp CheckThe low oil pressure indicator comes onwhen you turn the ignition switch ON soyou can check that it is working. Theindicator remains on until after the engineis started.
When applicable, the high beam andneutral indicators come on when you turnthe ignition switch ON and remain on untilyou select the low beam or shift out ofneutral.
These indicators are identified in the tableon pages with the words:
If one of these indicators does not comeon when it should, have your Honda dealercheck for problems.
The neutral indicator, high beam indicator,left turn signal indicator, right turn signalindicator, and high coolant temperatureindicator light for a few seconds and thengo off when you turn the ignition switchON.
The PGM-FI malfunction indicator lamp(MIL) and HESD indicator light for a fewseconds and then go off when you turn theignition switch ON and engine stop switchis at RUN.
2118
07/01/08 17:32:30 31MFJ600 0024
16
Gauges, Indicators & Displays
Instruments & Controls
Meter Check.
Meter Check
If the tachometer needle does not swing tothe end of the red zone when it should,have your Honda dealer check forproblems.
The meter is identified in the table on pagewith the words:
The tachometer needle will swing to theend of the red zone once when you turnthe ignition switch ON.
18
07/01/08 17:32:36 31MFJ600 0025
-
(1)
(2)
(3)
(1) multi-function display(2) fuel gauge(3) speedometer
17
Gauges, Indicators & Displays
Instruments & Controls
DisplayCheck.
Display Check
When the ignition switch is turned ON, themulti-function display ( ) and fuel gauge( ) will temporarily show the entiredigital display. Thereafter, thespeedometer ( ) will show from 180 mphto 0 mph (from 290 km/h to 0 km/h inkm/h) so that you can make sure the liquidcrystal display is functioning properly.
The displays are identified in the table onpages with the words:
If any part of these displays does not comeon when it should, have your Honda dealercheck for problems.
12
3
18 19
07/01/08 17:32:45 31MFJ600 0026
18
Gauges, Indicators & Displays
Instruments & Controls
Lamp Check.
Display Check.
Meter Check.
Lamp Check.
Flashes when the left turn signal operates.
fuel gauge
left turn signal indicator(green)tachometer
tachometer red zone
Shows approximate fuel supply available (page ).
Shows engine speed in revolutions per minute (rpm).
Shows excessive engine rpm range (indicated fromthe beginning of the tachometer red zone) in whichoperation may damage the engine. Do not let thetachometer needle enter the red zone.
1
2
3
4
5 Flashes when the right turn signal operates.right turn signal indicator(green)
22
07/01/08 17:32:56 31MFJ600 0027
19
Gauges, Indicators & Displays
Instruments & Controls
Display Check.multi-function display The display includes the following functions:6
digital clock Shows hour and minute (page ).
tripmeter A & B Shows the number of miles or kilometers riddensince you last reset the meter. The tripmeter has twosub modes, ‘‘A’’ and ‘‘B.’’ To zero (0) the tripmeter,press the RESET button (page ).
odometer Shows the total miles or kilometers ridden (page ).
speedometer Shows riding speed in miles or kilometers per hour(page ).
coolant temperaturemeter
Shows coolant temperature (page ).Fahrenheit (°F) or Centigrade (°C).
25
2728
3128
07/01/08 17:33:08 31MFJ600 0028
-
20
Gauges, Indicators & Displays
Instruments & Controls
Lamp Check.
Lamp Check.
Lamp Check.PGM-FI malfunctionindicator lamp (MIL)(red)
Lights when there is any abnormality in the PGM-FI(Programmed Fuel Injection) system. Should alsolight for a few seconds and then go off when theignition switch is turned ON and the engine stopswitch is at RUN. If the indicator comes on at anyother time, reduce speed and take your motorcycle toa Honda dealer as soon as possible.
HESD indicator(red)
7
8
9 high coolant temperatureindicator (red)
Lights when the coolant is over the specifiedtemperature. If the indicator comes on, pull safely tothe side of the road. See pages forinstructions and cautions.
Lights when there is any abnormality in the HESD(Honda Electronic Steering Damper). Should alsolight for a few seconds and then go off when theignition switch is turned ON and the engine stopswitch is at RUN. If the indicator comes on at anyother time, reduce speed and take your motorcycle toa Honda dealer as soon as possible (page ).38
190189
07/01/08 17:33:17 31MFJ600 0029
-
-
-
21
Gauges, Indicators & Displays
Instruments & Controls
Lamp Check
Lamp Check.
Lamp Check.
low oil pressureindicator (red)
Lights when engine oil pressure is low enough tocause engine damage. If the low oil pressureindicator lights during operation, pull safely to theside of the road. See page for instructions andcautions. .
neutral indicator(green)
Lights when the transmission is in neutral.
high beam indicator(blue)
Lights when the headlight is on high beam.
RESET button Resets the tripmeter to zero (0) (page ).Also used to change the speed, mileage andtemperature units for the speedometer/odometer/tripmeter/coolant temperature meter (pages
).Also used to set the digital clock (pages ).Selects the odometer, tripmeter A and tripmeter B(page ).Also used to set the digital clock (pages ).
10
11
12
13
14 SEL button
191
2930
28
3331
3331
28
07/01/08 17:33:31 31MFJ600 0030
4.76 US gal (18.0 )
1.00 US gal (3.8 )
(1) fuel gauge display(2) segment F(3) segment E
(2)
(3)
(1)
22
Fuel Gauge
Gauges, Indicators & Displays
Instruments & Controls
When segment E ( ) flashes, you shouldrefill the tank as soon as possible.The amount of fuel remaining when theflashing starts is approximately:
The fuel gauge liquid crystal display ( )shows the approximate fuel supplyavailable in a graduated display. Whensegment F ( ) goes on, the fuel tankcapacity is:
1
2
3
07/01/08 17:33:40 31MFJ600 0031
23
Gauges, Indicators & Displays
Instruments & Controls
Fuel Gauge Failure IndicationWhen the fuel system has an error, thefuel gauge indicators will be displayed asshown in the illustration. If this occurs, seeyour Honda dealer as soon as possible.
07/01/08 17:33:51 31MFJ600 0032
(5)
(1)
(4)
(2)
(3)
(1) multi-function display(2) speedometer(3) coolant temperature meter(4) odometer/tripmeter(5) digital clock
24
Multi-function Display
Gauges, Indicators & Displays
Instruments & Controls
The multi-function display ( ) includesthe following functions:
Both the digital clock and tripmeter willreset if the battery is disconnected.
1
speedometercoolant temperature meterodometer/tripmeterdigital clock
07/01/08 17:33:59 31MFJ600 0033
--
--
〈 〉
〈 〉
(1)
(1) coolant temperature meter
Centigrade (°C)
Fahrenheit (°F)
25
Coolant Temperature Meter
Gauges, Indicators & Displays
Instruments & Controls
The coolant temperature meter ( ) showsthe coolant temperature digitally.
Temperature Display
USA : Fahrenheit (°F), orCentigrade (°C).
Canada : Centigrade (°C).1
‘‘--’’ is displayed.
Actual coolanttemperature isdisplayed.Actual coolanttemperature isdisplayed andflashed.The display remainsand flashes‘‘270 °F (132 °C)’’.
Below94 °F (34 °C)Between95 °F 250 °F(35 °C 121 °C)Between251 °F 269 °F(122 °C 131 °C)
Above270 °F (132 °C)
07/01/08 17:34:09 31MFJ600 0034
-
〈 〉
〈 〉
Fahrenheit (°F)
Centigrade (°C)
(2)
(2) high coolant temperature indicator
26
Gauges, Indicators & Displays
Instruments & Controls
Continuing to ride with an overheatedengine can cause serious engine damage.
Overheating Message:When the coolant temperature reaches251°F (122°C), the numbers in thetemperature display start flashing and thehigh coolant temperature indicator ( )comes on.If this occurs, stop the engine and checkthe reserve tank coolant level. Read pages
and do not ride the motorcycleuntil the problem has been corrected.104
2
107
07/01/08 17:34:18 31MFJ600 0035
(1)
(1) speedometer
27
Speedometer
Gauges, Indicators & Displays
Instruments & Controls
The speedometer ( ) shows riding speedin miles or kilometers per hour.
1
07/01/08 17:34:24 31MFJ600 0036
(2)
(3)
(4)
(5)
(1) odometer(2) tripmeter A(3) tripmeter B
(1)
(4) SEL button(5) RESET button
28
Odometer/Tripmeter A & B
Instruments & Controls
Gauges, Indicators & Displays
The odometer ( ) shows the total miles orkilometers ridden.
The tripmeter A ( ) and tripmeter B ( )show number of miles or kilometersridden since you last reset the meter.
To select the odometer, tripmeter A ortripmeter B, push the SEL button ( ).
To reset the tripmeter, push and hold theRESET button ( ) when the display is inthe tripmeter A or tripmeter B.
1
2 3
5
4
07/01/08 17:34:32 31MFJ600 0037
(1) RESET button
(1)
29
Changing the Speed,Mileage and Temperature Unit
Gauges, Indicators & Displays
Instruments & Controls
The speedometer displays both ‘‘mph’’and ‘‘km/h.’’The odometer/tripmeter displays both‘‘mile’’ and ‘‘km.’’The coolant temperature meter displaysboth ‘‘°F’’ (Fahrenheit) and ‘‘°C’’(Centigrade).
To select ‘‘mph’’/‘‘mile’’ and ‘‘km/h’’/‘‘km,’’ push the RESET button ( ) withthe display in the tripmeter A mode.
1
07/01/08 17:34:40 31MFJ600 0038
〈 〉 〈 〉
(1)
Fahrenheit (°F) Centigrade (°C)
(1) RESET button
30
Gauges, Indicators & Displays
Instruments & Controls
To select ‘‘°F’’ (Fahrenheit) and ‘‘°C’’(Centigrade), push the RESET button ( )with the display in the tripmeter B mode.
(USA only)
1
07/01/08 17:34:48 31MFJ600 0039
(2)
(3)
(1)
(1) digital clock(2) SEL button(3) RESET button
31
Digital Clock
Gauges, Indicators & Displays
Instruments & Controls
Turn the ignition switch ON.
Shows hour and minute. To adjust the time,proceed as follows:
(cont’d)
Push and hold both the SEL button ( )and RESET button ( ) for more than 2seconds. The clock will be set in theadjust mode with the hour displayflashing.
1.2.
32
07/01/08 17:34:57 31MFJ600 0040
-
32
Gauges, Indicators & Displays
Instruments & Controls
Push the SEL button. The minutedisplay will start flashing.
The time is advanced by one hour,each time the button is pushed.Quick setting push and hold theRESET button until the desired hourand AM/PM appear.
To set the hour, push the RESET buttonuntil the desired hour and AM/PM aredisplayed.
3. 4.
07/01/08 17:35:08 31MFJ600 0041
-
33
Gauges, Indicators & Displays
Instruments & Controls
To set the minute, push and release theRESET button until the desired minuteis displayed. The minute display willreturn to ‘‘00’’ when ‘‘60’’ is reachedwithout affecting the hour display.
Quick setting push and hold theRESET button until the desiredminute appears.
The time advances by one minute,each time the button is pushed.
To end the adjustment, push the SELbutton or turn the ignition switch OFF.The display will stop flashingautomatically and the adjustment willbe cancelled if the button is not pushedfor about 30 seconds.
5. 6.
07/01/08 17:35:16 31MFJ600 0042
ONOFF
Electrical circuits on.No electricalcircuits function.No electrical circuitsfunction. Locks thesteering head.
LOCK(steeringlock)
FRONT
(1) ignition switch
OOFFFF
LOCK
OONN(1)
Key Position Function
34
Ignition Switch
Controls & Features
Instruments & Controls
The ignition switch ( ) is used for startingand stopping the engine (page ) and tolock the steering for theft prevention (page
). Insert the key and turn it to the rightfor the ON position. Push down on the keyand turn it to the left to the LOCK(steering lock) position.
To unlock the steering lock, insert andpush down on the key and turn it to theright to the OFF position.
151
60
07/01/08 17:35:30 31MFJ600 0043
(1)
RIGHT HANDLEBAR(2)
(1) start button(2) engine stop switch
OFFRUN
35
Start Button Engine Stop Switch
Controls & Features
Instruments & Controls
Starting Procedure,
The start button ( ) is used for starting theengine. Pushing the button in starts theengine. See page .
The engine will not operate if the enginestop switch is in the OFF position whenthe start button is pushed.
When the start button is pushed, the startermotor will crank the engine; the headlightwill automatically go out, but the positionlight, taillight and license light will stay on.
The engine stop switch ( ) is used to stopthe engine in an emergency. To operate,push the switch to the OFF position. Theswitch must be in the RUN position tostart the engine, and it should normallyremain in the RUN position even when theengine is OFF.
1
52
2
07/01/08 17:35:41 31MFJ600 0044
(1)
(2)
(1) headlight dimmer switch(2) turn signal switch(3) horn button
HILO
(3)
LEFT HANDLEBAR
36
Turn Signal Switch
Headlight Dimmer Switch
Controls & Features
Instruments & Controls
The turn signal switch ( ) is used to signala turn or a lane change. To operate, movethe switch all the way in the properdirection and release it. The appropriateturn signal lights will start blinking. Tocancel the light, push the switch in.The headlight dimmer switch ( ) is used
to change between the high and low beamsof the headlight. To operate, turn theswitch to HI for high beam, LO for lowbeam.
If your motorcycle is stopped with theignition switch ON and the engine stopswitch OFF, the headlight, position light,taillight and license light will remain on,resulting in battery discharge.
1
2
07/01/08 17:35:50 31MFJ600 0045
-
-
37
Horn Button
RESET Button
SEL Button
Controls & Features
Instruments & Controls
The horn is used to alert other motorists.To operate, push the horn button ( ).
The RESET button is used to reset (zero)the tripmeter. To reset the tripmeter, pressand hold the button for 2 3 seconds(page ).
The RESET button is also used to changethe speed, mileage and temperature unitsfor the speedometer/odometer/tripmeter/coolant temperature meter (pages
).
The RESET button is also used to set thedigital clock (page ).
The SEL button is used to select odometer,tripmeter A or tripmeter B. To select fromone tripmeter to the other, press the button(page ).
The SEL button is also used to set thedigital clock (page ).
3
28
3029
31
31
28
07/01/08 17:36:02 31MFJ600 0046
(1)
(2)
(1) HESD(2) HESD indicator
38
HESD (Honda ElectronicSteering Damper)
Controls & Features
Instruments & Controls
This motorcycle is equipped with theelectronically-controlled steering damper.
The HESD ( ) automatically controls thesteering damper characteristics inaccordance with the vehicle speed and theacceleration.
The HESD indicator ( ) lights when thereis any abnormality in the HESD. TheHESD indicator should also light for afew seconds and then go off when theignition switch is turned ON and enginestop switch is at RUN.
If the HESD indicator lights at any othertime, reduce speed and take yourmotorcycle to a Honda dealer as soon aspossible.
1
2
07/01/08 17:36:10 31MFJ600 0047
39
Before Riding
Before Riding
Before each ride, you need to make sureyou and your Honda are both ready to ride.To help get you prepared, this sectiondiscusses how to evaluate your ridingreadiness, what items you should check onyour motorcycle, and adjustments to makefor your comfort, convenience, or safety.This section also includes importantinformation about loading.
For information about adjusting thesuspension on your Honda, see page .
........................Are You Ready to Ride? ...............................Protective Apparel .
....................................Rider Training .......Is Your Motorcycle Ready to Ride? .
.............................Pre-ride Inspection .......................Load Limits & Guidelines .
...............................................Loading .........................................Load Limits .
............................Loading Guidelines .
404042434346464747
120
07/01/08 17:36:21 31MFJ600 0048
40
Protective Apparel
Are You Ready to Ride?
Before Riding
Before you ride your motorcycle for thefirst time, we urge you to:
Read this owner’s manual.Make sure you understand all the safetymessages.Know how to operate all the controls.
You feel well and are in good physicaland mental condition.
Before each ride, be sure: For your safety, we strongly recommendthat you always wear an approvedmotorcycle helmet, eye protection, boots,gloves, long pants, and a long-sleevedshirt or jacket whenever you ride.Although complete protection is notpossible, wearing proper gear can reducethe chance of injury when you ride.Following are suggestions to help youchoose the proper gear.
You are wearing an approvedmotorcycle helmet (with chin straptightened securely), eye protection, andother protective clothing.
Make sure your passenger is ready to ride,too, and is wearing proper gear including ahelmet.
You don’t have any alcohol or drugs inyour system.
If you must carry an extra helmet whileriding, use a commercially-availableelastic cord, strap, or net to secure thehelmet to the seat.
07/01/08 17:36:34 31MFJ600 0049
Not wearing a helmet increasesthe chance of serious injury ordeath in a crash.
Be sure you and your passengeralways wear a helmet, eyeprotection, and other protectiveapparel when you ride.
41
Are You Ready to Ride?
Before Riding
(cont’d)
Helmets and Eye ProtectionYour helmet is your most important pieceof riding gear because it offers the bestprotection against head injuries. A helmetshould fit your head comfortably andsecurely. A bright-colored helmet andreflective strips can make you morenoticeable in traffic.
An open-face helmet offers someprotection, but a full-face helmet offersmore. Regardless of the style, look for aDOT (Department of Transportation)sticker in any helmet you buy (USA only).Always wear a face shield or goggles toprotect your eyes and help your vision.
Leather gloves to help protect yourhands.
Sturdy boots with non-slip soles to helpprotect your feet and ankles.
In addition to a helmet and eye protection,we also recommend:
Additional Riding Gear
07/01/08 17:36:45 31MFJ600 0050
42
Rider Training
Are You Ready to Ride?
Before Riding
Riding Tips
A motorcycle riding suit or jacket forcomfort as well as protection.Bright-colored and reflective clothingcan help make you more noticeable intraffic. Avoid loose clothes that couldget caught on any part of yourmotorcycle.
To avoid possible heat damage to yourmotorcycle or personal belongings, do notblock or restrict air flow around theexhaust muffler with baggage or clothing.
Developing your riding skills is an on-going process. Even if you have riddenother motorcycles, take time to becomefamiliar with how this motorcycle worksand handles.
Practice riding the motorcycle in a safearea to build your skills. Do not ride intraffic until you get accustomed to themotorcycle’s controls, and feelcomfortable with its size and weight.
We urge all riders to take a certifiedcourse approved by the Motorcycle SafetyFoundation (MSF). New riders shouldstart with the basic course, and evenexperienced riders will find the advancedcourse beneficial. For information aboutthe MSF training course nearest you, callthe national toll-free number: (800) 446-9227.
Other riding tips can be found in thebooklet that came with your
motorcycle (USA only).
07/01/08 17:36:53 31MFJ600 0051
Improperly maintaining thismotorcycle or failing to correct aproblem before riding can cause acrash in which you can beseriously hurt or killed.
Always perform a pre-rideinspection before every ride andcorrect any problems.
43
Pre-ride Inspection
Before Riding
Is Your Motorcycle Ready to Ride?
Chain
Tires&
Wheels
Before each ride, it’s important to inspectyour motorcycle and make sure anyproblem you find is corrected. A pre-rideinspection is a must, not only for safety,but because having a breakdown, or evena flat tire, can be a major inconvenience.
Check the following items before you geton the motorcycle:
Look at the tires. If a tireappears low, use an air pressuregauge to check its pressure. Alsolook for signs of excessive wear(page ) or damage to thetires and wheels.
Check the condition of the chain.Adjust slack and lubricate asneeded (page ).
137
144
07/01/08 17:37:03 31MFJ600 0052
44
Is Your Motorcycle Ready to Ride?
Before Riding
Leaks,LooseParts
Lights
Load Limits
Cargo
Adjustments
Walk around yourmotorcycle and look foranything that appearsunusual, such as a leak orloose cable.
If you are carrying a passenger or cargo,also check the following:
Make sure you do notexceed the load limits(page ).
Check that all cargo issecure.
Adjust the suspension(pages , )according to your load.
Make sure the headlight,position light, brakelight,taillight, license light andturn signals are workingproperly.
121 125
47
07/01/08 17:37:14 31MFJ600 0053
45
Is Your Motorcycle Ready to Ride?
Before Riding
Periodic MaintenanceThrottle
Brakes
Indicators
If you haven’t ridden the motorcycle inover a week, you should also check otheritems, such as the oil level and other fluids.See (page ).Periodic maintenance should also be doneat least once a month, no matter how oftenyou ride.
Remember, be sure to take care of anyproblem you find, or have your Hondadealer correct it before you ride.
Check these items after you get on themotorcycle:
Rotate the throttle to checkit moves smoothly withoutbinding.
Pull the brake lever andpress on the brake pedal tocheck that they operatenormally.
Turn the ignition on andcheck for normal operationof the indicators (page ).
72
14
07/01/08 17:37:25 31MFJ600 0054
Overloading or improper loadingcan cause a crash and you can beseriously hurt or killed.
Follow all load limits and otherloading guidelines in this manual.
46
Loading
Load Limits & Guidelines
Before Riding
Your motorcycle has been designed tocarry you and one passenger. When youcarry a passenger, you may feel somedifference during acceleration and braking.But so long as you keep your motorcyclewell-maintained, with good tires andbrakes, you can safely carry loads withinthe given limits and guidelines.
However, exceeding the weight limit orcarrying an unbalanced load can seriouslyimpair your motorcycle’s handling,braking, and stability. Non-Hondaaccessories, improper modifications, andpoor maintenance can also reduce yoursafety margin.
How much weight you put on yourmotorcycle, and how you load it, areimportant to your safety. Anytime youride with a passenger or cargo, you shouldbe aware of the following information.
07/01/08 17:37:33 31MFJ600 0055
366 lbs (166 kg)
31 lbs (14 kg)
375 lbs (170 kg) (Canada only)
47
Loading GuidelinesLoad Limits
Load Limits & Guidelines
Before Riding
maximum weight capacity:
maximum cargo weight:
Your motorcycle is primarily intended fortransporting you and a passenger. Youmay wish to secure a jacket or other smallitems to the seat when you are not ridingwith a passenger.
If you wish to carry more cargo, checkwith your Honda dealer for advice, and besure to read the information regardingaccessories on page .
Following are the load limits for yourmotorcycle:
includes the weight of the rider,passenger, all cargo, and all accessories.
Improperly loading your motorcycle canaffect its stability and handling. Even ifyour motorcycle is properly loaded, youshould ride at reduced speeds and neverexceed 80 mph (130 km/h) when carryingcargo.
The weight of added accessories willreduce the maximum cargo weight youcan carry.
5
07/01/08 17:37:46 31MFJ600 0056
48
Load Limits & Guidelines
Before Riding
Follow these guidelines whenever youcarry a passenger or cargo:
To prevent loose items from creating ahazard, make sure that all cargo is tieddown securely before you ride.Place cargo weight as low and close tothe center of your motorcycle aspossible.Balance cargo weight evenly on bothsides.
Check that both tires are properlyinflated (page ).If you change your normal load, youmay need to adjust the front suspension(page ) and the rear suspension(page ).
To avoid possible heat damage to yourmotorcycle or personal belongings, donot block or restrict air flow around theexhaust muffler with baggage orclothing.
135
121125
07/01/08 17:37:56 31MFJ600 0057
49
Basic Operation & Riding
Basic Operation & Riding
This section gives basic riding instructions,including how to start and stop yourengine, and how to use the throttle, clutch,and brakes. It also provides importantinformation on riding with a passenger orcargo.
To protect your new engine and enjoyoptimum performance and service life,refer to Break-in Guidelines (page ).
To protect the catalytic converter in yourmotorcycle’s exhaust system, avoidextended idling and the use of leadedgasoline.
.........................Safe Riding Precautions ..............Starting & Stopping the Engine .
..........................................Preparation ...............................Starting Procedure .
..................................Flooded Engine .Bank Angle Sensor Ignition Cut-off
................................................System ......................How to Stop the Engine .
.........................................Shifting Gears ....................................................Braking .....................................................Parking .
..........Riding with a Passenger or Cargo .........................Theft-Prevention Tips .
210
5051515253
53545557596264
07/01/08 17:38:10 31MFJ600 0058
50
Safe Riding Precautions
Basic Operation & Riding
Motorcycle Saf ety
Bef ore Riding
Before riding your motorcycle for the firsttime, please review thesection beginning on page 1, and the
section beginning on page.
Even if you have ridden other motorcycles,take time to become familiar with howthis motorcycle works and handles.Practice in a safe area until you build yourskills and get accustomed to themotorcycle’s size and weight.
Make sure flammable materials such asdry grass or leaves do not come in contactwith the exhaust system when riding,idling, or parking your motorcycle.
39
07/01/08 17:38:16 31MFJ600 0059
51
Preparation
Starting & Stopping the Engine
Basic Operation & Riding
Always follow the proper startingprocedure described below.
For your safety, avoid starting or operatingthe engine in an enclosed area such as agarage. Your motorcycle’s exhaustcontains poisonous carbon monoxide gaswhich can collect rapidly in an enclosedarea and cause illness or death.
Your motorcycle can be started with thetransmission in gear by pulling in theclutch lever before operating the starter.
Your motorcycle is equipped with a sidestand ignition cut-off system. If the sidestand is down –– the engine cannot bestarted unless the transmission is in neutral.If the side stand is up –– the engine can bestarted in neutral, or in gear with the
clutch lever pulled in. After starting withthe side stand down, the engine will stop ifthe transmission is put in gear beforeraising the side stand.
Before starting, insert the key, turn theignition switch ON, and confirm thefollowing:
The transmission is in neutral (neutralindicator light ON).The engine stop switch is set to RUN.The low oil pressure indicator is ON.The PGM-FI malfunction indicatorlamp (MIL) is OFF.The high coolant temperatureindicator is OFF.The HESD indicator is OFF.
07/01/08 17:38:28 31MFJ600 0060
52
Starting Procedure
Starting & Stopping the Engine
Basic Operation & Riding
Any Air Temperature
The engine will not start if the throttle isfully open (because the electronic controlmodule cuts off the fuel supply).
The low oil pressure indicator should gooff a few seconds after the engine starts.If the low oil pressure indicator lightsduring operation, stop the engineimmediately and check the engine oil level.
This motorcycle has a fuel-injected withan automatic choke. Follow the procedureindicated below.
With the throttle completely closed,press the start button.
Even if the engine coolant stays below thespecified temperature, the cooling fansometimes starts up running when you revup the engine, but this is normal.
1.
07/01/08 17:38:37 31MFJ600 0061
-
53
Flooded Engine Bank Angle Sensor IgnitionCut-off System
Starting & Stopping the Engine
Basic Operation & Riding
IfYour Engine Quits or Won’t Start,
If the engine fails to start after repeatedattempts, it may be flooded with excessfuel. To clear a flooded engine:
Leave the engine stop switch set toRUN.Open the throttle fully.Press the start button for 5 seconds.Follow the normal starting procedure.If the engine starts, then open thethrottle slightly if idling is unstable.
If the engine still won’t start, refer topage
.
Your motorcycle’s banking (lean angle)sensor system is designed to automaticallystop the engine and fuel pump if themotorcycle is overturned.
Before restarting the engine, you mustturn the ignition switch to the OFFposition and then back to ON. The enginewill not restart until you perform thisprocedure.If the engine does not start, wait 10
seconds, then follow stepsagain.
1.
4.5.
2.3.
1 4
171
07/01/08 17:38:50 31MFJ600 0062
54
How to Stop the Engine
Starting & Stopping the Engine
Basic Operation & Riding
Normal Engine StopTo stop the engine, shift into neutral andturn the ignition switch OFF.
The engine stop switch should normallyremain in the RUN position even when theengine is OFF.
Emergency Engine StopTo stop the engine in an emergency, usethe engine stop switch. To operate, pressthe switch to the OFF position.
If your motorcycle is stopped with theengine stop switch OFF and the ignitionswitch ON, the headlight, position light,taillight, and license light will remainon, resulting in battery discharge.
07/01/08 17:38:58 31MFJ600 0063
shifting pattern
55
Shifting Gears
Basic Operation & Riding
Learning when to shift gears comes withexperience. Keep the following tips inmind:
Close the throttle and pull the clutchlever in completely before shifting.Improper shifting may damage theengine, transmission, and drive train.Learn to recognize the engagementpoint as you release the clutch lever. Itis at this point the transmission ofpower to the rear wheel resumes.Upshift to a higher gear or reducethrottle before engine rpm (speed) getstoo high. Learn the relationship betweenengine sound and the normal shiftingpoints.
As a general rule, shift while moving ina straight line.
Downshift to a lower gear before youfeel the engine laboring (lugging) atlow rpm.
Your motorcycle has six forward gears ina one-down, five-up shift pattern which iscoordinated with a cable-operated clutchsystem.
(cont’d)
07/01/08 17:39:08 31MFJ600 0064
56
Shifting Gears
Basic Operation & Riding
Shif ting Up:
Shif ting Down:
Avoid downshifting to help slow yourmotorcycle when engine rpm is near itsallowable maximum (near thetachometer red zone). In this situation,the rev limiter in the engine ignitioncontrol module may not preventexcessive engine speed which coulddamage the engine.To prevent transmission damage, do notcoast or tow the motorcycle for longdistances with the engine off.
Recommended Shift PointsRide in the highest gear that lets theengine run and accelerate smoothly. Thiswill give you good fuel economy andeffective emissions control. Whenchanging gears under normal conditions,use these recommended shift points:
From 1st to 2nd:From 2nd to 3rd:From 3rd to 4th:From 4th to 5th:From 5th to 6th:
12 mph (20 km/h)19 mph (30 km/h)25 mph (40 km/h)31 mph (50 km/h)37 mph (60 km/h)
From 6th to 5th:From 5th to 4th:From 4th to 3rd:
28 mph (45 km/h)22 mph (35 km/h)16 mph (25 km/h)
Pull the clutch lever in when speed dropsbelow 12 mph (20 km/h), when engineroughness is evident, or when enginestalling is imminent; and shift down to 1stgear for acceleration.
07/01/08 17:39:20 31MFJ600 0065
57
Braking
Basic Operation & Riding
As a general rule, the front braking systemprovides about 70 percent of total stoppingpower.
For full braking effectiveness, use boththe pedal and lever simultaneously.Using both braking systems will stopyour motorcycle faster with greaterstability.
To slow or stop, apply the brake lever andbrake pedal smoothly, while downshiftingto match your speed.
Gradually increase braking as you feel thebrakes slowing your speed. The increasein engine compression from downshiftingwill help slow your motorcycle.
To prevent stalling the engine, pull theclutch lever in before coming to acomplete stop. For support, put your leftfoot down first, then your right foot whenyou are through using the brake pedal.
Applying the brakes too hard may causethe wheels to lock and slide, reducingcontrol of your motorcycle. If this happens,release the brake controls, steer straightahead until you regain control, thenreapply the brakes more gently.
Your motorcycle is equipped with discbraking systems which are hydraulicallyactivated. Operating the brake leverapplies the two front disc brakes.Depressing the brake pedal applies the reardisc brake.
07/01/08 17:39:29 31MFJ600 0066
58
Braking
Basic Operation & Riding
When possible, reduce your speed orcomplete braking before entering a turn.Avoid braking or closing the throttlequickly while turning. Either action maycause one or both wheels to slip andreduce your control of your motorcycle.
Your ability to brake in a turn and to brakehard in an emergency situation areimportant riding skills. We suggestattending a Motorcycle Safety Foundationexperienced rider training course(page ) to retain these skills.
Riding with your foot resting on thebrake pedal or your hand on the brakelever may actuate the brakelight, givinga false indication to other drivers. Itmay also overheat the brakes, reducingeffectiveness.
When descending a long, steep grade,use engine compression braking bydownshifting, with intermittent use ofboth brakes. Continuous brakeapplication can overheat the brakes andreduce their effectiveness.
When riding in wet or rainy conditions, oron loose surfaces, the ability to maneuverand stop will be reduced. All of youractions should be smooth under theseconditions. Rapid acceleration, braking orturning may cause loss of control.
For your safety, exercise extreme cautionwhen braking, accelerating or turning.
42
07/01/08 17:39:36 31MFJ600 0067
59
Parking
Basic Operation & Riding
Catalytic Converter
Look for a level parking area. If youcan’t park on a paved surface, makesure the ground surface is firm,especially under the side stand.If you must park on a hill, leave thetransmission in gear and position therear tire against the curb at a 45 degreeangle.
To lower the side stand, use your footto guide it down. Remember thatlowering the side stand with thetransmission in gear will stop theengine, even if the clutch lever ispulled in. That is a function of theside stand ignition cut-off system.
Use the side stand to support themotorcycle while parked.
(cont’d)
Check that the side stand is down allthe way so that the side stand ignitioncut-off system (page ) is activated.If you have to park on a soft surface,insert something solid under the sidestand for support.
Make sure flammable materials such asdry grass or leaves do not come incontact with the exhaust system whenparking your motorcycle. Refer to
, page .
To avoid possible heat damage to yourmotorcycle or personal belongings, do notcover the exhaust muffler with aprotective cover or any clothing within 20minutes after shutting off the engine.
1. 2.
217
51
07/01/08 17:39:47 31MFJ600 0068
(1) ignition key
(1)
FRONT
(A) push in(B) turn to LOCK(C) turn to OFF
(A) (B)
((AA))(C)
To lock
To unlock
60
Parking
Basic Operation & Riding
(To unlock the steering lock, insert andpush down on the key and turn it to theright to the OFF position.)
Use the steering lock, which locks thehandlebar in place. Turn the handlebarall the way to the left. Push in on theignition key ( ) and turn it to LOCK.Remove the key.
3.
1
07/01/08 17:39:55 31MFJ600 0069
Riding with a helmet attached tothe holder can interfere with therear wheel or suspension andcould cause a crash in which youcan be seriously hurt or killed.
Use the helmet holder only whileparked. Do not ride with a helmetsecured by the holder.
(2)
LEFT REAR
(4)(3)
(2) helmet holder wire(3) D-ring
(4) helmet holder
61Basic Operation & Riding
Parking
Use the helmet holder wire stored in thetool kit to secure your helmet with yourmotorcycle:
Route either end of the helmet holderwire ( ) through the helmet’s D-ring( ).
Remove the rear seat (page ).
Remove the helmet holder wire andstore it in the tool kit when it is notused.
Hook the loops of the wire onto thehelmet holder ( ) and install the rearseat to lock.
4.
2
87
3
4
07/01/08 17:40:06 31MFJ600 0070
62
Theft-Prevention Tips
Parking
Basic Operation & Riding
If you decide to use an anti-theft device,select one of good quality and be sure tofollow the manufacturer’s instructions.
Park your motorcycle in a lockedgarage whenever possible. If a garageisn’t available, park in a concealed areaor in a well-lit area with enoughpedestrian traffic to discourage a thief.Always take the ignition key with you.Always use the steering lock (page ),even if you’re parking for just a minuteor two. A thief can easily push anunlocked motorcycle to a waiting truck.In addition to the steering lock, use agood quality anti-theft device madespecifically to lock a motorcycle to asecure object.
The rear fender has a storagecompartment to store a U-shaped lockunder the rear seat. Some U-shapedlocks may not be stored in thecompartment due to their size or design.
60
07/01/08 17:40:15 31MFJ600 0071
UNDER REAR SEAT
63
Parking
Basic Operation & Riding
Keep your owner’s manual, currentregistration, and insurance informationwith your motorcycle. This will make iteasier for the authorities to find you ifyour motorcycle is stolen and recovered.
07/01/08 17:40:20 31MFJ600 0072
64
Riding with a Passenger or Cargo
Basic Operation & Riding
Load Limits,Loading
Guidelines,
Your motorcycle is a high-performancesport model designed to carry you and onepassenger. Whenever you add a passengeror cargo, you must be careful not toexceed the total load limits for this vehicle( page ). Make sure yourcargo is properly secured (
page ).
Also consider adjusting the suspension(page ) for the extra load.
Be aware that carrying a passenger orheavy cargo can affect acceleration,braking, and handling.
Tell your passenger to hold the seat strapor your waist, lean with you in the turns,and keep their feet on the passengerfootpegs at all times, even when themotorcycle is stopped at a traffic light.
Before riding with a passenger, make sureyour passenger is wearing the properprotective apparel (page ). Also checkthat your passenger is not wearing anyloose apparel that might get caught in thedrive chain.47
47
40
120
07/01/08 17:40:29 31MFJ600 0073
65Servicing Your Honda
Servicing Your Honda
Maintenance, replacement or repair ofthe emission control devices andsystems may be performed by anymotorcycle repair establishment orindividual using parts that are‘‘certified’’ to EPA standards.
Bef ore You Service Your Honda
To help keep your motorcycle in goodshape, this section includes a MaintenanceSchedule for required service, a list ofperiodic checks you should perform atleast once a month, and step-by-stepinstructions for specific maintenance tasks.You’ll also find important safetyprecautions, information on fuels and oils,and tips for keeping your Honda lookinggreat.
For information about the exhaustemission and noise emission requirementsof the U.S. Environmental ProtectionAgency (EPA) and the California AirResources Board (CARB), see page .
For information about replacing fuses, seepage .
(cont’d)
USA only
............The Importance of Maintenance .................................Maintenance Safety .
.............Important Safety Precautions ..............................Periodic Maintenance ............................Maintenance Schedule .
...............................Maintenance Record .211
192
686970727479
07/01/08 17:40:43 31MFJ600 0074
66
Servicing Your Honda
Servicing Your Honda
Service Preparations
Service Procedures
Chassis
Electrical
......Maintenance Component Locations ....................................................Tool Kit .
........................Owner’s Manual Storage ...........................................Seat Removal .
.........................Lower Fairing Removal .........................Middle Fairing Removal .
Fluids & Filters.........................................................Fuel .
.................................Engine Oil & Filter .
Engine...............................................Throttle .
................................................Coolant .
.....................................Clutch System ..........................................Spark Plugs .
..........................................Suspension ..................................................Brakes .
....................................................Tires ............................................Side Stand .
........................................Drive Chain .
................................................Battery .
................................Appearance Care .
818485868890
9194
104
108110114
120129135142143
150
155
07/01/08 17:41:05 31MFJ600 0075
*
**
*
**
67
Servicing Your Honda
Servicing Your Honda
The following table summarizes the three types of inspections and servicingrecommendations for your motorcycle. Both the pre-ride inspection and the scheduledmaintenance at the recommended intervals are necessary to assure safe and dependableperformance. The periodic checks provide additional confidence in your motorcycle’sperformance.
more often if you ride frequently or long distances; or anytime you clean your motorcycleunless you have the proper tools and service data and are mechanically qualified
Type of Inspection/Service
Maintenance SchedulePeriodic MaintenancePre-ride Inspection
Refer to page:
interval on schedulemonthlybefore every ride
your Honda dealeryouyou
Who PerformsWhen Performed437274
07/01/08 17:41:22 31MFJ600 0076
Improperly maintaining thismotorcycle or failing to correct aproblem before you ride cancause a crash in which you can beseriously hurt or killed.
Always follow the inspection andmaintenance recommendationsand schedules in this owner’smanual.
68
The Importance of Maintenance
Servicing Your Honda
Keeping your motorcycle well-maintainedis absolutely essential to your safety. It’salso a good way to protect yourinvestment, get maximum performance,avoid breakdowns, and have more fun. Aproperly maintained motorcycle will alsohelp to reduce air pollution.
Remember, proper maintenance is theowner’s responsibility. Be sure to inspectyour motorcycle before each ride, performthe periodic checks, and follow theMaintenance Schedule in this section.
If your motorcycle overturns or isinvolved in a crash, be sure your Hondadealer inspects all major parts, even if youare able to make some repairs.
07/01/08 17:41:28 31MFJ600 0077
Failure to properly followmaintenance instructions andprecautions can cause you to beseriously hurt or killed.
Always follow the procedures andprecautions in this owner’smanual.
69
Maintenance Safety
Servicing Your Honda
This section includes instructions on howto perform some important maintenancetasks. If you have basic mechanical skills,you can perform many of these tasks withthe tools provided with your motorcycle.
Other tasks that are more difficult andrequire special tools are best performed byprofessionals. Wheel removal shouldnormally be handled only by a Hondatechnician or other qualified mechanic.Instructions are included in this manualonly to assist in emergency service.
Some of the most important safetyprecautions follow. However, we cannotwarn you of every conceivable hazard thatcan arise in performing maintenance. Onlyyou can decide whether or not you shouldperform a given task.
07/01/08 17:41:35 31MFJ600 0078
70
Important Safety Precautions
Maintenance Safety
Servicing Your Honda
Carbon monoxide poisoning fromengine exhaust.
Burns from hot motorcycle parts.
Injury from moving parts.
Read the instructions before you begin,and make sure you have the tools andskills required.
Make sure the engine is off before youbegin any maintenance or repairs. Thiswill help eliminate several potentialhazards:
Be sure there isadequate ventilation whenever youoperate the engine.
Letthe engine and exhaust system coolbefore touching.
Do not runthe engine unless instructed to do so.
To help prevent the motorcycle fromfalling over, park it on a firm, levelsurface, using the side stand or amaintenance stand to provide support.To reduce the possibility of a fire orexplosion, be careful when workingaround gasoline. Use onlynon-flammable solvent, not gasoline, toclean parts. Keep cigarettes, sparks, andflames away from all fuel-related parts.
07/01/08 17:41:43 31MFJ600 0079
71
Maintenance Safety
Servicing Your Honda
Remember that your Honda dealer knowsyour motorcycle best and is fully equippedto maintain and repair it. To ensure thebest quality and reliability, use only newgenuine Honda parts or their equivalentsfor repair and replacement. If you have thetools and skills required for additionalmaintenance jobs, you can purchase anofficial Honda Service Manual (page
).222
07/01/08 17:41:48 31MFJ600 0080
72
Periodic Maintenance
Servicing Your Honda
In addition to the regularly scheduledmaintenance (page ) and daily pre-rideinspection (page ), consider performingthe periodic checks on the following pageat least once a month, even if you haven’tridden your motorcycle, or as often asonce a week if you ride frequently or forlong distances. It’s a good idea to performthis maintenance any time you clean yourmotorcycle.
Check the odometer reading and performany scheduled maintenance checks that areneeded (page ). Remember, morefrequent checks may be needed for ridingin severe conditions.
7443
74
07/01/08 17:41:53 31MFJ600 0081
73
Periodic Maintenance
Servicing Your Honda
Fluids
FusesCheck condition, adjust slack, and lubricate as needed (page ).
Lights
Drive Chain
Freeplay
Make sure you have a full supply of spare fuses.Check the major fasteners and tighten as needed.Nuts & Bolts
Check the levels of the engine oil (page ), coolant (page ),and brake fluid (page ). Add the correct fluid as necessary, andinvestigate the cause of any low fluid level.
Check the freeplay of the clutch lever (page ) and throttle grip(page ).
Check the air pressure with a gauge and add air if needed (page ).Examine the tread for wear (page ).Look closely for nails, embedded objects, cuts, and other types ofdamage (page ). Roll your motorcycle so you can inspect theentire surface.Check the condition of the wheels.
Tires &Wheels
Make sure the headlight, position light, brakelight, taillight, licenselight and turn signals are working properly.
135137
137
105131
98
110108
143
07/01/08 17:42:06 31MFJ600 0082
74 Servicing Your Honda
Maintenance Schedule
The required Maintenance Schedule thatfollows specifies how often you shouldhave your motorcycle serviced, and whatthings need attention. It is essential to haveyour motorcycle serviced as scheduled tomaintain safe, dependable performanceand proper emission control.
Some items in the Maintenance Schedulecan be performed with basic mechanicalskills and hand tools. Procedures for theseitems are provided in this manual. Otheritems involve more extensive proceduresand may require special training, tools,and equipment. We recommend that youhave your Honda dealer perform thesetasks unless you have advancedmechanical skills and the required toolsand equipment. Procedures for such itemsin this schedule are provided in an officialHonda Service Manual available forpurchase (page ).
The service intervals in this MaintenanceSchedule are based on average ridingconditions. Some items will need morefrequent service if you ride in unusuallywet or dusty areas or at full throttle.Consult your Honda dealer forrecommendations applicable to yourindividual needs and use.
222
07/01/08 17:42:13 31MFJ600 0083
* **
*
**
75
Maintenance Schedule
Servicing Your Honda
If you do not feel capable of performing agiven task or need assistance, rememberthat your Honda dealer knows yourmotorcycle best and is fully equipped tomaintain and repair it. If you decide to doyour own maintenance, use only genuineHonda parts or their equivalents for repairor replacement to ensure the best qualityand reliability.
Perform the pre-ride inspection (page )and owner maintenance (page ) at eachscheduled maintenance period.
Each item on the maintenance schedulerequires some mechanical knowledge.Certain items (particularly those marked
and ) may require more technicalinformation and tools. Consult yourHonda dealer.
In the interest of safety, we recommendthese items be serviced only by yourHonda dealer.
Should be serviced by your Hondadealer, unless you have the proper toolsand service data and are mechanicallyqualified. Refer to the official HondaService Manual (page ).
4374 222
07/01/08 17:42:21 31MFJ600 0084
76 Servicing Your Honda
Maintenance Schedule
Summary of Maintenance Schedule Notes& Procedures:
At higher odometer readings, repeat atthe frequency interval established here.Service more frequently if themotorcycle is ridden in unusually wet ordusty areas.
Maintenance Procedures:I: inspect and clean, adjust, lubricate,
or replace, if necessaryC: cleanA: adjustL: lubricateR: replace
California type only.Replace every 2 years, or at indicatedodometer interval, whichever comesfirst. Replacement requires mechanicalskill.
NOTES:1.
2.
3.4.
07/01/08 17:42:31 31MFJ600 0085
××
-
-
-
--
-
-
****
*
**
*
**
*
**
1,000 mi
1,000 km
24
38.4
I
I
I
R
R
I
I
I
20
32.0
16
25.6
I
I
I
R
I
I
I
12
19.2
I
I
8
12.8
I
I
R
I
I
I
4
6.4
0.6
1.0
R
NOTE
2
4
3
FUEL LINE
THROTTLE OPERATION
AIR CLEANER
SPARK PLUGS
VALVE CLEARANCE
ENGINE OIL
ENGINE OIL FILTER
RADIATOR COOLANT
COOLING SYSTEM
SECONDARY AIR SUPPLY
SYSTEM
EVAPORATIVE EMISSION
CONTROL SYSTEM
EXHAUST GAS CONTROL
VALVE CABLE
Refer to
page
108
114
94
99
104
ODOMETER READING (Note 1)
ITEM
FREQUENCY
EVERY 16,000 mi (25,600 km) I,
EVERY 32,000 mi (51,200 km) R
INITIAL=
REGULAR=
600 mi (1,000 km) or 1 month: R
EVERY 8,000 mi (12,800 km)
or 12 months: R
EM
ISS
ION
RE
LAT
ED
ITE
MS
EVERY 16,000 mi (25,600 km) I
77Servicing Your Honda
Maintenance Schedule
In the interest of safety, we recommend these items be serviced only by your Honda dealer.
Should be serviced by your Honda dealer, unless you have the proper tools and service data and aremechanically qualified. Refer to the official Honda Service Manual (page ).222
07/01/08 17:42:44 31MFJ600 0086
××
--
----
**
******
*
**
1,000 mi
1,000 km
0.6
1.0
I
I
I
I
4
6.4
I
I
I
8
12.8
I
I
I
I
I
I
I
I
I
I
I
12
19.2
R
I
I
16
25.6
I
I
I
I
I
I
I
I
I
I
I
20
32.0
I
I
I
24
38.4
R
I
I
I
I
I
I
I
I
I
I
NOTE
4
DRIVE CHAIN
BRAKE FLUID
BRAKE PAD WEAR
BRAKE SYSTEM
BRAKELIGHT SWITCH
HEADLIGHT AIM
CLUTCH SYSTEM
SIDE STAND
SUSPENSION
NUTS, BOLTS, FASTENERS
WHEELS/TIRES
STEERING HEAD
BEARINGS
Refer to
page
143
130
133
129
110
142
ODOMETER READING (Note 1)
ITEM
FREQUENCYN
ON
-EM
ISS
ION
RE
LAT
ED
ITE
MS
EVERY 500 mi (800 km) I, L
78
Maintenance Schedule
Servicing Your Honda
Should be serviced by your Honda dealer, unless you have the proper tools and service data and aremechanically qualified. Refer to the official Honda Service Manual (page ).In the interest of safety, we recommend these items be serviced only by your Honda dealer.
222
07/01/08 17:43:00 31MFJ600 0087
79
Maintenance Record
Servicing Your Honda
Miles (km) Odometer Date Performed By: Notes600 (1,000)
4,000 (6,400)8,000 (12,800)
12,000 (19,200)16,000 (25,600)20,000 (32,000)
Keeping an accurate maintenance record will help ensure that your motorcycle is properlymaintained. Retain detailed receipts to verify the maintenance was performed. If themotorcycle is sold, these receipts should be transferred with the motorcycle to the new owner.Make sure whoever performs the maintenance completes this record. All scheduledmaintenance, including the 600 mile (1,000 km) initial maintenance, is considered a normalowner operating cost and will be charged for by your dealer. Use the space under Notes torecord anything you want to remind yourself about or mention to your dealer.
07/01/08 17:43:09 31MFJ600 0088
80
Maintenance Record
Servicing Your Honda
Miles (km) Odometer Date NotesPerformed By:24,000 (38,400)28,000 (44,800)32,000 (51,200)36,000 (57,600)40,000 (64,000)44,000 (70,400)48,000 (76,800)52,000 (83,200)56,000 (89,600)60,000 (96,000)64,000 (102,400)68,000 (108,800)
07/01/08 17:43:18 31MFJ600 0089
throttle grip
front brake fluidreservoir
front brake leverclutch lever
fuel fill capfront suspension spring pre-load adjusterfront suspension rebound damping adjuster
81Servicing Your Honda
Maintenance Component Locations
07/01/08 17:43:23 31MFJ600 0090
rear brakecaliper
coolant reserve tank
rear brakefluid reservoir
batterymain fuse
owner’s manualstorage compartment
spark plugs
front suspensioncompressiondamping adjuster
front brakecaliper
engine oil filter
rear brake pedal
engine oil levelinspection window
fuse boxtool kit
engine oil filler cap
82 Servicing Your Honda
Maintenance Component Locations
07/01/08 17:43:30 31MFJ600 0091
rear suspension compressiondamping adjuster
rear suspension springpre-load adjusterrear suspension rebounddamping adjuster
drive chain
front suspension compressiondamping adjuster
engine oil drain bolt
front brakecaliper
83Servicing Your Honda
Maintenance Component Locations
07/01/08 17:43:36 31MFJ600 0092
(1) tool kit
(1)
UNDER REAR SEAT
84
Tool Kit
Servicing Your Honda
The tool kit ( ) is stored under the rearseat (page ).
An optional, larger tool kit may beavailable. Check with your Honda dealer’sparts department.
187
07/01/08 17:43:42 31MFJ600 0093
(1)
UNDER REAR SEAT
(2)
(1) plastic storage bag(2) owner’s manual storage compartment
85
Owner’s Manual Storage
Servicing Your Honda
Be careful not to flood this area whenwashing your motorcycle.
Your motorcycle provides storage for theowner’s manual so you’ll have it with youfor easy reference. Store your owner’smanual (and other documents) in theplastic storage bag ( ) in the owner’smanual storage compartment ( ) underthe rear seat (page ).
12
87
07/01/08 17:43:49 31MFJ600 0094
(2)
(1) front seat(2) mounting bolts
(4)
(3)
(3) washers(4) tab
(1)
86
Seat Removal
Servicing Your Honda
Saf ety PrecautionsRefer to on page .
Front Seat Removal
The front seat must be removed forbattery or fuse maintenance.
To remove the front seat ( ), pull the rearcorners of the seat back, remove themounting bolts ( ) and washers ( ), andthen pull the seat up and back.
To install the front seat, insert the tab ( )into the recess under the frame and tightenthe mounting bolts securely.
70
1
3
4
2
07/01/08 17:43:59 31MFJ600 0095
(1) rear seat(2) ignition key(3) seat lock
(4) prongs(5) seat hook(6) guide hooks
(2)
(1)
(3)
(4)
(6)
(5)
87
Seat Removal
Servicing Your Honda
Rear Seat Removal
To install the rear seat, insert the prongs( ) into the seat hook ( ) and guide hooks( ), and then push down on the front ofthe rear seat.
To remove the rear seat ( ), insert theignition key ( ) into the seat lock ( ).Turn it clockwise, then pull the rear seatforward and up.
4
21
3
56
07/01/08 17:44:07 31MFJ600 0096
(1)
(2)
(1) A bolts(2) B bolts(3) C bolt
(1)
(2)
(3)
(5)
(4)
(4) lower fairing(5) tubes
88 Servicing Your Honda
Lower Fairing Removal (Except California)
Saf ety PrecautionsRefer to on page .
Installation can be done in the reverseorder of removal.
Installation
The lower fairing must be removed toservice the coolant reserve tank or toreplace the oil filter.
RemovalRemove the A bolts (1), B bolts (2) andC bolt (3).Remove the lower fairing ( ), then pullout the tubes ( ).
Through the tubes properly in position.
1.
2.
70
54
07/01/08 17:44:18 31MFJ600 0097
(2)
(2)
(1)
(3) (4)
(1)
(1) A bolts(2) B bolts(3) C bolt
(4) lower fairing(5) clamp(6) tubes
(6)
(5)
89Servicing Your Honda
Lower Fairing Removal (California Only)
Saf ety PrecautionsRefer to on page .
The lower fairing must be removed toservice the coolant reserve tank or toreplace the oil filter.
RemovalRemove the A bolts (1), B bolts (2) andC bolt (3).
InstallationInstallation can be done in the reverseorder of removal.Through the tubes properly in position.
Remove the lower fairing ( ) andclamp ( ), then pull out the tubes ( ).
2.
1.
70
465
07/01/08 17:44:30 31MFJ600 0098
(3)
(2)
LEFT SIDE (right side similar)
(4) middle fairing(5) front turn signal
connector
(1)
(4)
(5)
(1) bolts(2) clips A(3) clip B
(2)
90
Middle Fairing Removal
Servicing Your Honda
Saf ety PrecautionsRefer to on page .
The middle fairing must be removed toaccess the spark plugs.The right and left middle fairings can beremoved in the same manner.
RemovalRemove the bolts ( ).Remove the clips A ( ).Pull the clip B ( ) out.Remove the middle fairing ( ) anddisconnect the front turn signalconnector ( ).
Be careful not to apply weight to themiddle fairing.Carefully release the each tabs.
InstallationInstallation can be done in the reverseorder of removal.
70
1.2.3.4.
5
21
43
07/01/08 17:44:43 31MFJ600 0099
premiumunleaded91 (or higher)
type
pump octanenumber
91
Fuel Recommendation
Fuel
Servicing Your Honda
Saf ety PrecautionsRefer to on page . Your engine is designed to use anypremium gasoline that has a pump octanenumber of 91 or higher. Gasoline pumpsat service stations normally display thepump octane number. For information onthe use of oxygenated fuels, see page .
Use of lower octane gasoline can causepersistent ‘‘pinging’’ or ‘‘spark knock’’ (aloud rapping noise) which, if severe, canlead to engine damage. Light pingingexperienced while operating under a heavyload, such as climbing a hill, is no causefor concern.
If pinging or spark knock occurs at asteady engine speed under normal load,change brands of gasoline. If pinging orspark knock persists, consult your Hondadealer.
The use of leaded gas will damage thecatalytic converter.
We recommend that you use premiumunleaded fuel because it produces fewerengine deposits and extends the life ofexhaust system components.
70
218
07/01/08 17:44:56 31MFJ600 0100
4.76 US gal (18.0 )
(3)
(1) ignition key(2) fuel fill cap
(3) filler neck
(2)
(1)
92
Refueling Procedure
Fuel Capacity
Fuel
Servicing Your Honda
Saf ety Precautions
Never use stale or contaminated gasolineor an oil/gasoline mixture. Avoid gettingdirt, dust, or water in the fuel tank.
Refer to on page .
Fuel tank capacity:
The tank should be refilled as soon aspossible when the E segment in the fuelgauge flashes.
Insert the ignition key ( ) in the fuelfill cap ( ) and turn it clockwise.
1.
70
12
07/01/08 17:45:07 31MFJ600 0101
Gasoline is highly flammable andexplosive. You can be burned orseriously injured when handlingfuel.
Stop the engine and keep heat,sparks and flame away.Handle fuel only outdoors.Wipe up spills immediately.
93
Fuel
Servicing Your Honda
Add fuel until the level reaches thebottom of the filler neck ( ). Avoidoverfilling the tank. There should be nofuel in the filler neck.
After refueling, push the fuel fill capclosed until it snaps and locks.Remove the ignition key from the cap.
Open the fuel fill cap.2.3.
5.
4.
3
07/01/08 17:45:15 31MFJ600 0102
94
Engine Oil & Filter
Servicing Your Honda
Engine oil quality is a major factor thataffects both the performance and theservice life of the engine.
When running in very dusty conditions, oilchanges should be performed morefrequently than specified in themaintenance schedule.
Using the proper oil (page ) and filter,and regularly checking, adding, andchanging oil will help extend yourengine’s life. Even the best oil wears out.Changing oil helps get rid of dirt anddeposits in the engine. Operating theengine with old or dirty oil can damageyour engine. Running the engine withinsufficient oil can cause serious damageto the engine and transmission.
Change the engine oil as specified in themaintenance schedule on page .
95
77
07/01/08 17:45:22 31MFJ600 0103
*
*
SG or higherexcept oilslabeled as energyconserving on thecircular APIservice label
MA
SAE 10W-30
Pro Honda GN4 4-stroke oil (USA& Canada), or Honda 4-stroke oil(Canada only), or an equivalentmotorcycle oil.
APIclassification
JASO T 903standard
viscosity(weight)
suggested oil
95
Oil Recommendation
Engine Oil & Filter
Servicing Your Honda
Suggested oils are equal in performanceto SJ oils that are not labeled as energyconserving on the circular API servicelabel.
07/01/08 17:45:34 31MFJ600 0104
OKNOT RECOMMENDED
96
Engine Oil & Filter
Servicing Your Honda
Your motorcycle does not need oiladditives. Use the recommended oil.
Other viscosities shown in the followingchart may be used when the averagetemperature in your riding area is withinthe indicated range.
Do not use oils with graphite ormolybdenum additives. They mayadversely affect clutch operation.Do not use API SH or higher oilsdisplaying a circular API ‘‘energyconserving’’ service label on thecontainer. They may affect lubricationand clutch performance.
Do not use non-detergent, vegetable, orcastor based racing oils.
07/01/08 17:45:46 31MFJ600 0105
(1)
(2)
(1) code number of the sales companyof the oil
(2) oil classification
97
Engine Oil & Filter
Servicing Your Honda
JASO T 903 standardThe JASO T 903 standard is an index forengine oils for 4-stroke motorcycleengines.There are two classes: MA and MB.Oil conforming to the standard is labeledon the oil container. For example, thefollowing label shows the MAclassification.
07/01/08 17:45:53 31MFJ600 0106
-
-
RIGHT SIDE
(2)
(1) upper level mark(2) lower level mark(3) inspection window
(1)
(4)
(4) oil filler cap
(3)
98
Checking & Adding Oil
Engine Oil & Filter
Servicing Your Honda
Saf ety PrecautionsRefer to on page .
Park your motorcycle on its side standon a firm, level surface.Start the engine and let it idle for 3 5minutes. Make sure the low oil pressureindicator goes off. If the indicatorremains on, stop the engineimmediately.Stop the engine and wait 2 3 minutes.Hold the motorcycle in an uprightposition.
2.
3.4.
1.
70
07/01/08 17:46:02 31MFJ600 0107
99
Changing Engine Oil & Filter
Engine Oil & Filter
Servicing Your Honda
Saf ety Precautions
Using the wrong oil f ilter may result inleaks or premature engine damage.
Refer to on page .
Your motorcycle’s oil filter has veryspecific performance requirements. Use anew genuine Honda oil filter or a filter ofequal quality specified for your model.
Check that the oil level is between theupper ( ) and lower ( ) level marks inthe inspection window ( ).
If the oil is at or near the upper levelmark –– you do not have to add oil.If the oil is below or near the lowerlevel mark –– remove the oil fillercap ( ) and add the recommended oiluntil it reaches the upper level mark.(Do not overfill.)Reinstall the oil filler cap.
Check for oil leaks.
13
5.
6.
4
2
70
07/01/08 17:46:13 31MFJ600 0108
--
(2) sealing washer
FRONT, UNDER ENGINE
(1) engine oil drain bolt
(2) (1)
100
Engine Oil & Filter
Servicing Your Honda
Drain the Engine Oil:
This procedure requires mechanical skilland professional tools such as a torquewrench and oil filter wrench, as well as ameans for disposing of the drained fluid(page ). If you do not have the skillsor the tools, see your Honda dealer.
Park the motorcycle on its side stand ona firm, level surface.If the engine is cold, start it and let itidle for 3 5 minutes. Turn the engineoff. Wait 2 3 minutes for the oil tosettle.Place a drain pan under the crankcase.To drain the oil, remove the oil fillercap, engine oil drain bolt ( ), andsealing washer ( ).
Remove the lower fairing (page ).
1.
2.
3.4.
5.
168
12
88
07/01/08 17:46:24 31MFJ600 0109
RIGHT SIDE
(3) oil filter
(3)
101
Engine Oil & Filter
Servicing Your Honda
Install a New Oil Filter:
Improper disposal of drained f luids isharmf ul to the environment.
(cont’d)
Remove the oil filter ( ) with a filterwrench and let the remaining oil drainout. Discard the oil filter in an approvedmanner (page ).Pour the drained oil into a suitablecontainer and dispose of it in anapproved manner (page ).
6.
7.
168
168
3
07/01/08 17:46:33 31MFJ600 0110
22 lbf·ft (30 N·m , 3.1 kgf·m)
3.0 US qt (2.8 )
19 lbf·ft (26 N·m , 2.7 kgf·m)
(4)
(4) oil filter rubber seal
102
Engine Oil & Filter
Servicing Your Honda
Add Engine Oil:
Apply a thin coat of engine oil to therubber seal ( ) of a new oil filter.
Install the new oil filter and tighten it byhand.
Check the condition of the sealingwasher on the engine oil drain bolt.Replace the washer every other time theoil is changed.Install the engine oil drain bolt andtighten it to the specified torque:
Fill the crankcase with therecommended oil (page ),approximately:
Install the oil filler cap.
Using an oil filter wrench attachmentand a torque wrench, tighten the new oilfilter to the specified torque:
Install the lower fairing.
4
10.
8.
9.
11.
12.
13.14.
95
07/01/08 17:46:46 31MFJ600 0111
-
-
103
Engine Oil & Filter
Servicing Your Honda
Hold the motorcycle upright and checkthat the oil level is at the upper levelmark in the inspection window (page
).Check that there are no oil leaks.
If a torque wrench is not used forinstallation, see your Honda dealer as soonas possible to verify proper assembly.
Start the engine and let it idle for 3 5minutes.Stop the engine and wait 2 3 minutes.
15.
16.17.
18.98
07/01/08 17:46:53 31MFJ600 0112
104
Coolant Recommendation
Coolant
Servicing Your Honda
Using coolant with silicate inhibitors maycause premature wear of water pumpseals or blockage of radiator passages.Using tap water may cause enginedamage.
Your motorcycle’s liquid cooling systemdissipates engine heat through the coolantjacket that surrounds the cylinder andcylinder head.
Use Pro Honda HP coolant or anequivalent high quality ethylene glycolantifreeze containing corrosion protectioninhibitors specifically recommended foruse in aluminum engines. Check theantifreeze container label.
Maintaining the coolant will allow thecooling system to work properly andprevent freezing, overheating, andcorrosion.
The factory provides a 50/50 solution ofantifreeze and water in this motorcycle.This coolant solution is recommended formost operating temperatures and providesgood corrosion protection.
Use only distilled water as a part of thecoolant solution. Water that is high inmineral content or salt may be harmful tothe aluminum engine.
07/01/08 17:47:02 31MFJ600 0113
RIGHT SIDE
(1)(2)
(3)(1) reserve tank(2) UPPER level mark(3) LOWER level mark(4) reserve tank cap
(4)(1)
105
Checking & Adding Coolant
Coolant
Servicing Your Honda
Saf ety PrecautionsRefer to on page .
Decreasing the concentration of antifreezeto less than 40% will not provide propercorrosion protection.
Increasing the concentration of antifreezeis not recommended because it decreasescooling system performance. Higherconcentrations of antifreeze (up to 60%)should only be used to provide additionalprotection against freezing. Check thecooling system frequently during freezingweather.
70
07/01/08 17:47:10 31MFJ600 0114
106
Coolant Replacement
Coolant
Servicing Your Honda
Saf ety PrecautionsRefer to on page .
If the reserve tank is empty, or ifcoolant loss is excessive, check forleaks and see your Honda dealer forrepair.
Coolant should be replaced by your Hondadealer, unless you have the proper toolsand service data and are mechanicallyqualified. Refer to the official HondaService Manual (page ).
With the engine at normal operatingtemperature, check the coolant level inthe reserve tank ( ). It should bebetween the UPPER ( ) and LOWER( ) level marks.
Remove the lower fairing (page ).Remove the reserve tank cap ( ).Always add coolant to the reserve tank.Do not attempt to add coolant byremoving the radiator cap.Add coolant to the reserve tank asrequired to bring the coolant level to theUPPER level mark.Install the reserve tank cap.Install the lower fairing.
1.
21
3
3.
4.
2.
5.6.
222884
70
07/01/08 17:47:23 31MFJ600 0115
Removing the radiator cap whilethe engine is hot can cause thecoolant to spray out, seriouslyscalding you.
Always let the engine and radiatorcool down before removing theradiator cap.
107
Coolant
Servicing Your Honda
You & the Environment,
Improper disposal of drained f luids isharmf ul to the environment.
To properly dispose of drained coolant,refer to page
.168
07/01/08 17:47:30 31MFJ600 0116
- -1/16 3/16 in (2 4 mm)
RIGHT HANDLEBAR(1)
(1) throttle cable boot(2) adjuster(3) lock nut
(3)
(2)
108
Throttle Freeplay
Throttle
Servicing Your Honda
Saf ety PrecautionsRefer to on page .
InspectionCheck freeplay at the throttle grip flange.Freeplay:
If necessary, adjust to the specified range.
AdjustmentSlide the throttle cable boot ( ) off theadjuster ( ).
Tighten the lock nut and return thethrottle cable boot securely over theadjuster.
After adjustment, check for smoothrotation of the throttle grip from fullyclosed to fully open in all steeringpositions.
Loosen the lock nut ( ).Turn the adjuster.
1.
2.3.
70
4.
1
5.
23
07/01/08 17:47:43 31MFJ600 0117
109
Throttle Inspection
Throttle
Servicing Your Honda
Saf ety PrecautionsRefer to on page .
Check that the throttle assembly ispositioned properly and the securingbolts are tight.Check for smooth rotation of thethrottle from fully open to fully closedin all steering positions. If there is aproblem, see your Honda dealer.
1.
2.
70
07/01/08 17:47:50 31MFJ600 0118
LEFT HANDLEBAR
(1) clutch lever
(1)
110
Clutch Freeplay
Clutch System
Servicing Your Honda
Saf ety PrecautionsRefer to on page .
Your motorcycle’s manually-activated,wet, multiplate clutch is part of theprimary drive system. Proper freeplayadjustment allows a smooth, gradualengagement when shifting gears.
Improper freeplay adjustment can causepremature clutch wear.
70
07/01/08 17:47:57 31MFJ600 0119
- -
++
--
+-
3/8 13/16 in (10 20 mm)
LEFT HANDLEBAR
(2)
(3)
(( ))
(( ))
(2) upper lock nut(3) upper clutch cable adjuster
( ) increase freeplay( ) decrease freeplay
111
Clutch System
Servicing Your Honda
InspectionCheck freeplay:
If necessary, adjust to the specifiedrange.
Upper AdjustmentAttempt adjustment with the upper clutchcable adjuster first.
Loosen the upper lock nut ( ).Turn the upper clutch cable adjuster ( )to obtain the specified freeplay.Tighten the upper lock nut and checkthe freeplay again.
1.
1.2.
3.
32
07/01/08 17:48:10 31MFJ600 0120
++
--
+-
RIGHT SIDE
(4)
(5)
(( ))
(( ))
(4) lower lock nut(5) lower adjusting nut
( ) increase freeplay( ) decrease freeplay
112
Clutch System
Servicing Your Honda
Lower AdjustmentIf the upper clutch cable adjuster isthreaded out near its limit –– or the correctfreeplay cannot be obtained –– attemptadjustment with the lower clutch cableadjuster.
Loosen the upper lock nut ( ) and turnthe upper clutch cable adjuster ( ) allthe way in (to provide maximumfreeplay). Tighten the upper lock nut.Loosen the lower lock nut ( ).Turn the lower adjusting nut ( ) toobtain the specified freeplay.Tighten the lower lock nut and checkthe adjustment.
1.
2.3.
4.
54
23
07/01/08 17:48:21 31MFJ600 0121
113
Other Inspections & Lubrication
Clutch System
Servicing Your Honda
Start the engine, pull the clutch lever in,and shift into gear. Make sure theengine does not stall and the motorcycledoes not creep. Gradually release theclutch lever and open the throttle. Yourmotorcycle should move smoothly andaccelerate gradually.
If you cannot get proper adjustment, or theclutch does not work properly, the cable orclutch friction discs may be worn. Seeyour Honda dealer or refer to the officialHonda Service Manual (page ).
Lubricate the clutch cable with acommercially-available cable lubricantto prevent premature wear andcorrosion.
Check the clutch cable for kinks orsigns of wear. If necessary, have itreplaced.
Check that the clutch lever assembly ispositioned properly and the securingbolts are tight.
5.
222
07/01/08 17:48:30 31MFJ600 0122
IMR9C-9HES (NGK)VUH27D (DENSO)
standardspark plug
or
114
Spark Plug Recommendation
Spark Plugs
Servicing Your Honda
Using spark plugs with an improper heatrange can cause engine damage.
This motorcycle uses spark plugs that havean iridium coated center electrode.Be sure to observe the following whenservicing the spark plugs.
Do not clean the spark plugs. If anelectrode is contaminated withaccumulated objects or dirt, replace thespark plug with a new one.To check the spark plug gap, use only a‘‘wire-type feeler gauge.’’ To preventdamaging the iridium coating of thecenter electrode, never use a ‘‘leaf-typefeeler gauge.’’
Use only the recommended type of sparkplugs in the recommended heat range.
Do not adjust the spark plug gap. If thegap is out of specification, replace thespark plug with a new one.
07/01/08 17:48:41 31MFJ600 0123
FRONT
(1)
(2)
(4)
(3)
(5)
(4) radiator lower mount nut(5) radiator lower mount bolt(6) radiator upper mount bolt
(6)
(1) radiator fan connector(2) wire harness clip(3) radiator heat guard
115
Spark Plug Inspection &Replacement
Spark Plugs
Servicing Your Honda
Saf ety PrecautionsRefer to on page .
Remove the right and left middlefairing (page ).Disconnect the radiator fan connector( ).Release the wire harness clip ( ) fromthe radiator heat guard ( ).Remove the radiator lower mount nut( ) and radiator lower mount bolt ( ).Remove the radiator upper mount bolt( ).
(cont’d)
1.
2.
3.
4.
5.
70
90
32
54
6
1
07/01/08 17:48:53 31MFJ600 0124
FRONT
(8)
(7)
(10)
(9)
(7) water pipe guard(8) bolt
RIGHT FRONT
(9) radiator(10) grommet
(11) hook
(11)
116
Spark Plugs
Servicing Your Honda
Remove the water pipe guard ( ) byremoving the bolt ( ).
Move the radiator ( ) out of the wayand remove the grommet ( ) from thehook ( ).Pull the radiator toward the front.
6.8
7 7.
8.
910
11
07/01/08 17:49:01 31MFJ600 0125
FRONT
(12) ignition coil connectors(13) ignition coils
(13)
(12)(14) spark plug wrench
FRONT (14)
117
Spark Plugs
Servicing Your Honda
Disconnect the ignition coil connectors( ).Disconnect the ignition coils ( ) fromthe spark plugs.
Clean any dirt from around the sparkplug bases.Using a spark plug wrench ( ), removethe spark plugs.
(cont’d)
9.
10.12
13
11.
12. 14
07/01/08 17:49:11 31MFJ600 0126
(15) spark plug gap
(15)
118
Spark Plugs
Servicing Your Honda
Inspect the electrodes and centerporcelain for deposits, corrosion, orcarbon fouling. If the corrosion ordeposits are heavy, replace the plug.Make sure that a 1.0 mm wire-typefeeler gauge cannot be inserted betweenthe spark plug gap ( ). If the gaugefits in the gap, replace the plug with anew one.
Make sure the plug washer is in goodcondition.With the plug washers attached, threadthe spark plugs in by hand to preventcross-threading.Tighten each spark plug:
If the old plug is good:1/8 turn after it seats.
If installing a new plug, tighten ittwice to prevent loosening:
First, tighten the plug:NGK: turn after it seats.DENSO: turn after it seats.Then loosen the plug.Next, tighten the plug again:1/8 turn after it seats.
13. 15.
14.
16.
17.
a)
b)c)
11/2
15
07/01/08 17:49:22 31MFJ600 0127
119
Spark Plugs
Servicing Your Honda
Improperly tightened spark plugs candamage the engine. If a plug is too loose,a piston may be damaged. If a plug is tootight, the threads may be damaged.
Reinstall the ignition coils.Connect the ignition coil connectors tothe ignition coils as before removal.Install the remaining parts in the reverseorder of removal.
18.19.
20.
07/01/08 17:49:29 31MFJ600 0128
120
Suspension
Servicing Your Honda
Your front and rear suspension systemsuse springs, hydraulic damping devices,and linkages (rear only) that suspend yourweight and most of the weight of yourmotorcycle.
The spring pre-loads for your front andrear suspension systems adjust the amountof force required to begin compression ofthe spring.
Consider adjusting your suspensionwhenever you change your normal load,by adding or subtracting a passenger,cargo, or accessories, or when the road orriding conditions change.
The oil damper systems hydraulicallycontrol the natural compression andrebound of the suspension springs so thattraction and comfort are maintained as thewheels ride over road surfaces.
The way you ride your motorcycle and thetype of ride you want to experience canalso influence your suspension needs.
You may adjust the spring pre-load andthe rebound and compression damping ofboth suspension systems.
07/01/08 17:49:37 31MFJ600 0129
121
Front Suspension Adjustment
Suspension
Servicing Your Honda
Lower spring pre-load and softer dampingprovide a softer ride and are usuallypreferred for light loads and smooth roads.Higher spring pre-load and firmerdamping provide a firmer ride and arerecommended for heavy loads, rough roadconditions, and faster, more challengingriding.
The front suspension can be adjusted forrider (and passenger) weight and ridingconditions by changing the spring pre-loadand rebound and compression damping.
To adjust, use an appropriate tool or seeyour Honda dealer.
07/01/08 17:49:43 31MFJ600 0130
FRONT(1)
(1) spring pre-load adjuster
122
Front Suspension SpringPre-load
Suspension
Servicing Your Honda
Saf ety Precautions
To Reduce Spring Pre-load (SOFT):
To Increase Spring Pre-load (HARD):
Refer to on page .
To adjust to the standard position:
Turn the adjuster clockwise turns.This is the standard position.Make sure that both fork legs areadjusted to the same position.
For a light load and smooth roadconditions, turn the adjustercounterclockwise toward SOFT.
For a firmer ride and rough roadconditions, turn the adjuster clockwisetoward HARD.
Turn the spring pre-load adjustercounterclockwise until it will no longerturn (lightly seats). This is the full softsetting.
Adjust the spring pre-load by turning thespring pre-load adjuster ( ) with a 19 mmwrench.
1.
2.
3.
570
1
07/01/08 17:49:55 31MFJ600 0131
FRONT
(1)
(2)
(1) damping adjuster(2) punch mark
(3) reference punchmark
(3)
123
Front Suspension Damping
Suspension
Servicing Your Honda
Saf ety Precautions
To Increase Rebound Damping(HARD):
To Reduce Rebound Damping (SOFT):
Refer to on page .
Rebound Damping
For a firmer ride and rough roadconditions, turn the adjuster clockwisetoward HARD (H).
For a light load and smooth roadconditions, turn the adjustercounterclockwise toward SOFT (S).
Make sure that both fork legs areadjusted to the same position.
To adjust to the standard position:Turn the damping adjuster ( )clockwise until it will no longer turn
(lightly seats). This is the full hardsetting.Turn the adjuster counterclockwiseapproximately turns so that thepunch mark ( ) on the adjuster alignswith the reference punch mark ( ). Thisis the standard position.
1.
2.
3.
702
3
2 1/2
1
07/01/08 17:50:09 31MFJ600 0132
(1)
(1) damping adjuster(2) punch mark(3) reference punch mark
RIGHT SIDE
(3)
(2)
124
Suspension
Servicing Your Honda
To Reduce Compression Damping(SOFT):
To Increase Compression Damping(HARD):
Compression Damping Turn the adjuster counterclockwiseapproximately turns so that thepunch mark ( ) on the adjuster alignswith the reference punch mark ( ). Thisis the standard position.
To adjust to the standard position:Turn the damping adjuster ( )clockwise until it will no longer turn(lightly seats). This is the full hardsetting.
For a light load and smooth roadconditions, turn the adjustercounterclockwise toward SOFT.
Make sure that both fork legs areadjusted to the same position.
For a firmer ride and rough roadconditions, turn the adjuster clockwisetoward HARD.
1.
2.
3
3.
22
1
07/01/08 17:50:21 31MFJ600 0133
125
Rear Suspension Adjustment
Suspension
Servicing Your Honda
The rear suspension can be adjusted forrider (and passenger) weight and ridingconditions by changing the spring pre-loadand rebound and compression damping.
To adjust, use an appropriate pin spanneror see your Honda dealer.
The rear shock absorber includes a damperunit that contains high pressure nitrogengas. Do not attempt to disassemble,service, or dispose of the damper; see yourHonda dealer. The instructions found inthis owner’s manual are limited toadjustments of the shock assembly only.
07/01/08 17:50:28 31MFJ600 0134
(1)
(2)LEFT SIDE
(1) spring pre-load adjuster(2) pin spanner(3) extension bar
12 3 4 567
8910
(3)
126
Rear Suspension Spring Pre-load
Suspension
Servicing Your Honda
Saf ety PrecautionsRefer to on page .
The spring pre-load adjuster ( ) haspositions for different load or riding
conditions.
Adjust the spring pre-load by turning thespring pre-load adjuster with a pin spanner( ) and extension bar ( ).
Always adjust the shock absorber positionin sequence (1-2-3-4-5-6-7-8-9-10 or 10-9-8-7-6-5-4-3-2-1). Attempting to adjustdirectly from 1 to 10 or 10 to 1 maydamage the shock absorber.
Position 1: for a light load and smoothroad conditions.Position 2: standard position.Positions 3 to 10: for when the motorcycleis more heavily loaded. (Also increasespring pre-load for stiffer rear suspension.)
110
70
2 3
07/01/08 17:50:39 31MFJ600 0135
(1)
(3)
(1) damping adjuster(2) punch mark(3) reference punch mark
LEFT SIDE
(2)
127
Rear Suspension Damping
Suspension
Servicing Your Honda
Saf ety Precautions
To Increase Rebound Damping(HARD):
To Reduce Rebound Damping (SOFT):
Refer to on page .
Rebound Damping
For a firmer ride and rough roadconditions, turn the adjuster clockwisetoward HARD (H).
For a light load and smooth roadconditions, turn the adjustercounterclockwise toward SOFT (S).
Turn the damping adjuster ( )clockwise until it will no longer turn(lightly seats). This is the full hardsetting.
To adjust to the standard position:
Turn the adjuster counterclockwiseapproximately turns so that thepunch mark ( ) on the adjuster alignswith the reference punch mark ( ). Thisis the standard position.
1.
2.
1
2
70
3
2 1/2
07/01/08 17:50:52 31MFJ600 0136
(1)
(3)
(2)
(1) damping adjuster(2) punch mark(3) reference punch mark
LEFT SIDE
128
Suspension
Servicing Your Honda
To Reduce Compression Damping(SOFT):
To Increase Compression Damping(HARD):
Compression Damping
For a light load and smooth roadconditions, turn the adjustercounterclockwise toward SOFT.
To adjust to the standard position:Turn the damping adjuster ( )clockwise until it will no longer turn(lightly seats). This is the full hardsetting.
Turn the adjuster counterclockwiseclicks so that the punch mark ( ) on
the adjuster aligns with the referencepunch mark ( ). This is the standardposition.
For a firmer ride and rough roadconditions, turn the adjuster clockwisetoward HARD.1.
2.
3
222
1
07/01/08 17:51:03 31MFJ600 0137
(4)
(2)
(3)(1)
(1) adjuster dial(2) brake lever
(3) index mark(4) numbers
RIGHT HANDLEBAR
129
Front Brake Lever Adjustment
Brakes
Servicing Your Honda
Saf ety Precautions
The hydraulic braking systems on yourmotorcycle dissipate the heat generated bythe friction of the brake pads on the brakediscs as the wheels are slowed.
As the brake pads wear, the brake fluidlevel will drop. A leak in the system willalso cause the level to drop.
Frequently inspect the system to ensurethere are no fluid leaks. Periodicallyinspect the brake fluid level and the brakepads for wear.
If the brake lever or brake pedal freeplaydoes not feel within the normal rangewhile riding, check the brake pads forwear (page ). Worn pads should bereplaced. If the pads are not worn beyondthe recommended limit, there is probably
air in the brake system. See your Hondadealer to have the air bled from the system.
Refer to on page .
The distance between the tip of the brakelever and the grip may be adjusted.
133
70
07/01/08 17:51:14 31MFJ600 0138
Honda DOT 4 BrakeFluid
brakefluid
130
Brake Fluid Recommendation
Brakes
Servicing Your Honda
The recommended brake fluid is HondaDOT 4 Brake Fluid, or any brake fluid ofequal quality and performance. Use freshbrake fluid from a sealed container. Besure to read the label before opening thesealed container. An opened containermay be contaminated or may haveabsorbed moisture from the air.
Turn the adjuster dial ( ) while pushingthe brake lever ( ) forward.
Apply the brake, release it, then spin thewheel and check that it rotates freely.Repeat this procedure several times.
Align the index mark ( ) on the brakelever with the numbers ( ) on theadjuster dial.
2.
3.
1. 12
34
07/01/08 17:51:23 31MFJ600 0139
(1)RIGHT HANDLEBAR
(1) UPPER level mark(2) LOWER level mark
(2)
131
Fluid Level Inspection
Brakes
Servicing Your Honda
Saf ety Precautions
Brake f luid can damage plastic andpainted surf aces. Handle with care.
Refer to on page .
If your inspection indicates a low fluidlevel, have your Honda dealer add therecommended brake fluid.
Wipe up spills immediately. Avoid contactwith skin or eyes. In case of contact, washthoroughly and call a doctor immediatelyif it contacts your eyes.
Do not add or replace brake fluid, exceptin an emergency. If you do add fluid, haveyour Honda dealer check the system assoon as possible.
70
07/01/08 17:51:33 31MFJ600 0140
RIGHT SIDE
(2)
(1) UPPER level mark(2) LOWER level mark
(1)
132
Brakes
Servicing Your Honda
Place your motorcycle in an uprightposition on a firm, level surface.Check the fluid level. It should bebetween the UPPER ( ) and LOWER( ) level marks. If the level is at orbelow the LOWER level mark, checkthe brake pads for wear (page ).
Worn pads should be replaced. If the padsare not worn beyond the recommendedlimit, have your brake system inspectedfor leaks.
Other InspectionsMake sure there are no fluid leaks.Check for deterioration or cracks in thehoses and fittings.
1.
2.
133
12
07/01/08 17:51:44 31MFJ600 0141
(1)
(1)
(1) wear indicator grooves
LEFT FRONT (Right side similar)
133
Brake Pad Wear
Brakes
Servicing Your Honda
Saf ety PrecautionsRefer to on page .
Brake pad wear depends upon the severityof usage, the type of riding, and roadconditions. Generally, the pads will wearfaster on wet and dirty roads. Inspect thepads at each regular maintenance interval(page ).
Front Brake
Always inspect both pads in both the rightand left brake calipers.
Check the wear indicator grooves ( ) ineach pad. If either pad is worn to thebottom of the grooves, replace both padsas a set. See your Honda dealer for thisservice.
70
78
1
07/01/08 17:51:53 31MFJ600 0142
RIGHT REAR
(1) cutouts
(1)
134 Servicing Your Honda
Brakes
Rear Brake Check the cutouts ( ) in each pad. Ifeither pad is worn to the cutout, replaceboth pads as a set. See your Honda dealerfor this service.
1
07/01/08 17:52:00 31MFJ600 0143
Using tires that are excessivelyworn or improperly inflated cancause a crash in which you can beseriously hurt or killed.
Follow all instructions in thisowner’s manual regarding tireinflation and maintenance.
135
Air Pressure
Tires
Servicing Your Honda
Saf ety Precautions
To safely operate your motorcycle, yourtires must be the proper type and size, ingood condition with adequate tread, andcorrectly inflated for the load you arecarrying.
The following pages give detailedinformation on how and when to check
your air pressure, how to inspect your tiresfor wear and damage, and ourrecommendations for tire repair andreplacement.
Properly inflated tires provide the bestcombination of handling, tread life, andriding comfort. Generally, underinflatedtires wear unevenly, adversely affecthandling, and are more likely to fail frombeing overheated. Overinflated tires makeyour motorcycle ride harshly, are moreprone to damage from road hazards, andwear unevenly.
Refer to on page .70
07/01/08 17:52:08 31MFJ600 0144
42 psi (290 kPa ,2.90 kgf/cm )
36 psi (250 kPa ,2.50 kgf/cm )
rear
front
136
Tires
Servicing Your Honda
We recommend that you visually checkyour tires before every ride and use an airpressure gauge to measure the air pressureat least once a month or any time youthink the tires might be low. Even tiresthat are in good condition may lose one totwo psi per month if not checked andadjusted regularly.
Tubeless tires have some degree of self-sealing ability if they are punctured.However, because leakage is often veryslow, you should look closely forpunctures whenever a tire is not fullyinflated.
Always check air pressure when your tiresare ‘‘cold’’ –– after the motorcycle hasbeen parked for at least three hours. If youcheck air pressure when your tires are
‘‘warm’’ –– even if your motorcycle hasonly been ridden for a few miles –– thereadings will be higher. If you let air outof warm tires to match the recommendedcold pressures, the tires will beunderinflated.
The recommended ‘‘cold’’ tire pressuresare:
07/01/08 17:52:17 31MFJ600 0145
(1)
(2)
(1) wear indicator(2) wear indicator location mark
137
Inspection
Tires
Servicing Your Honda
Saf ety PrecautionsRefer to on page .
Whenever you check the tire pressures,you should also look for:
Bumps or bulges in the side of the tireor the tread. Replace any tire that has abump or bulge.Cuts, slits, or cracks in the tires.Replace the tire if you can see fabric orcord.Nails or other foreign objects embeddedin the side of the tire or tread.Excessive tread wear.
Also, if you hit a pothole or hard objectwhile riding, pull to the side of the road assoon as you safely can and carefullyinspect the tires for damage.
Tread Wear
70
07/01/08 17:52:28 31MFJ600 0146
0.06 in (1.5 mm)0.08 in (2.0 mm)
frontrear
138
Tire Repair
Tires
Servicing Your Honda
Saf ety Precautions
If You Have a Flat Tire,
For the best performance, you shouldreplace a tire before the tread depth at thecenter reaches the following limits:
We strongly recommend that you replace,not repair, any tire that is punctured ordamaged. As discussed below, a tire that isrepaired, either temporarily orpermanently, will have lower speed andperformance limits than a new orundamaged tire.
If the wear indicators are visible, replacethe tire immediately as it is no longer safe.
Refer to on page .
A temporary repair can sometimes bemade in an emergency situation.However, since a temporary repair maynot hold, you must ride very slowly,preferably without any cargo or passenger,and have the tire replaced or permanentlyrepaired as soon as possible.(For more information on temporaryrepairs, see page
.)176
70
07/01/08 17:52:39 31MFJ600 0147
139
Tire Replacement
Tires
Servicing Your Honda
Saf ety Precautions
A permanent repair, such as an internalplug patch, can be made if a tire has only asmall puncture in the tread area. With sucha repair, you should not exceed 50 mph(80 km/h) for the first 24 hours, or 80 mph(130 km/h) at any time thereafter. Inaddition, you may not be able to safelycarry as much weight. If you choose tohave a tire repaired, be sure the repairwork is performed by a professional andthat the wheel is balanced before you ride.
Refer to on page .
The tires that came on your motorcyclewere designed to match the performancecapabilities of your motorcycle andprovide the best combination of handling,braking, durability, and comfort.
If you have a tire professionally repairedat a non-Honda facility, we recommendthat you have the work checked by yourHonda dealer.
70
07/01/08 17:52:46 31MFJ600 0148
120/70ZR17M/C (58W)
180/55ZR17M/C (73W)
DUNLOPQualifier PTG
BRIDGESTONEBT015F RADIAL E
DUNLOPQualifier PTG
BRIDGESTONEBT015R RADIAL E
radial-ply, tubeless
front
rear
type
Installing improper tires on yourmotorcycle can affect handlingand stability. This can cause acrash in which you can beseriously hurt or killed.
Always use the size and type oftires recommended in this owner’smanual.
140
Tires
Servicing Your Honda
The recommended tires for yourmotorcycle are:
You should replace the tires with tires ofthe same size, load range, and speed ratingas the originals.
07/01/08 17:52:56 31MFJ600 0149
141
Tires
Servicing Your Honda
If you have a tire professionally replacedat a non-Honda facility, we recommendthat you have the work checked by yourHonda dealer.
Important Safety RemindersDo not install a tube inside a tubelesstire on this motorcycle. Excessive heatbuild-up can cause the tube to burst.Use only tubeless tires on thismotorcycle. The rims are designed fortubeless tires, and during hardacceleration or braking, a tube-type tirecould slip on the rim and cause the tireto rapidly deflate.Do not install a bias-ply tire on thismotorcycle. Mixing bias-ply and radialtires can adversely affect handling andstability.
Whenever you replace a tire, remember:Have the wheel balanced after the tire isinstalled.Have the tire replaced by your Hondadealer if possible.
07/01/08 17:53:07 31MFJ600 0150
LEFT SIDE
(1) side stand spring
(1)
142
Side Stand
Servicing Your Honda
Saf ety PrecautionsRefer to on page . Check the spring for damage or loss oftension.Check the side stand ignition cut-offsystem:
Sit on the motorcycle and put thetransmission in neutral.Raise the side stand.Start the engine.Pull the clutch lever in.Shift the transmission into gear.Lower the side stand all the way.
The engine should stop as you lower theside stand. If the engine doesn’t stop,see your Honda dealer for service.
Check that the side stand assembly isworking properly. If the side stand isstiff or squeaky, clean the pivot areaand lubricate the pivot bolt with cleangrease.
1.
2.3.4.5.6.
70
07/01/08 17:53:20 31MFJ600 0151
143
Drive Chain
Servicing Your Honda
An endless (riveted master link) chainconnects the countershaft and rear wheelsprockets. The O-ring chain uses rubberrings between the side plates of the pinand roller links to seal in themanufacturer-installed lubricating greaseand keep out moisture and dirt.
Under severe usage, or when themotorcycle is ridden in unusually dusty ormuddy areas, more frequent maintenancewill be necessary.
The service life of the chain depends onproper lubrication and adjustment. Poormaintenance can cause premature wear ordamage to the drive chain or sprockets.
The drive chain should be checked,adjusted, and lubricated as part of the pre-ride inspection (page ).
Before servicing your drive chain, turn theengine OFF, lower the side stand, andcheck that your transmission is in neutral.
It is not necessary to remove or replace thedrive chain to perform the recommendedservice in the Maintenance Schedule.
43
07/01/08 17:53:29 31MFJ600 0152
- -1 3/16 1 9/16 in (30 40 mm)
LEFT SIDE
(1) drive chain
(1)
144
Inspection
Drive Chain
Servicing Your Honda
Saf ety PrecautionsRefer to on page .
Check slack in the lower drive chain( ) run midway between the sprockets.Drive chain slack should allow thefollowing vertical movement by hand:
Check drive chain slack at severalpoints along the chain. The slack shouldremain constant. If it isn’t, some linksmay be kinked and binding. Lubricatingthe chain will often eliminate bindingand kinking.
damaged rollersdry or rusted linkskinked or binding linksexcessive wearimproper adjustmentdamaged or missing O-rings
Inspect the drive chain for:
1.
2.
3.
1
70
07/01/08 17:53:40 31MFJ600 0153
wornsprocketteeth
REPLACE
damagedsprocketteeth
REPLACE
normal sprocket teethGOOD
145
Drive Chain
Servicing Your Honda
Use of a new chain with worn sprocketswill cause rapid chain wear.
Inspect the front and rear wheelsprocket teeth for excessive wear ordamage. If necessary, have your Hondadealer replace a worn sprocket.
Replace the drive chain (page ) if ithas damaged rollers, loose pins, orkinks that cannot be freed. Lubricate thedrive chain (page ) if it appears dryor shows signs of rust. Lubricate anykinked or binding links and work themfree. Adjust chain slack if needed.
4.
149
148
07/01/08 17:53:47 31MFJ600 0154
- -
1 15/16 in (50 mm)
1 3/16 1 9/16 in (30 40 mm)
LEFT SIDE (1)
(2)(1) red zone (2) index mark
146
Adjustment
Drive Chain
Servicing Your Honda
Saf ety Precautions
Wear Inspection The bottom part of the frame may bedamaged by excessive drive chain slack ofmore than:
Drive chain slack should be checked andadjusted, if necessary, every 500 miles(800 km). When operated at sustainedhigh speeds or under conditions offrequent rapid acceleration, the chain mayrequire more frequent adjustments.
Refer to on page .
Check the chain wear label when adjustingthe chain. If the red zone ( ) on the labelaligns with the index mark ( ) on thechain adjustment plate after the chain hasbeen adjusted to the proper slack, thechain is excessively worn and must bereplaced. The proper slack is:
21
70
07/01/08 17:53:58 31MFJ600 0155
- -1 3/16 1 9/16 in (30 40 mm)
(2)
(1)
(4)
(5)
(3)RIGHT SIDE
(4) chain adjusterindex mark
(5) scalegraduations
(1) rear axle nut(2) drive chain
lock nut(3) drive chain
adjusting bolt
147
Drive Chain
Servicing Your Honda
Turn both drive chain adjusting bolts( ) an equal number of turns until thecorrect drive chain slack is obtained.Turn the drive chain adjusting boltscounterclockwise to tighten the chain,Turn the drive chain adjusting boltsclockwise and push the rear wheeltoward the front to provide more slack.Adjust the chain slack at a pointmidway between the front sprocket andthe rear wheel sprocket.Roll the motorcycle forward. Stop andplace it on its side stand. Recheck chainslack. Chain slack should allow thefollowing vertical movement by hand:
Loosen the rear axle nut ( ).
Place the motorcycle on its side standwith the transmission in neutral and theignition switch OFF.
Loosen the drive chain lock nuts ( ) onboth sides of the swingarm.
(cont’d)
1.
2.
3.
4.
2
1
3
07/01/08 17:54:09 31MFJ600 0156
SAE 80 or 90 gear oil
83 lbf·ft (113 N·m , 11.5 kgf·m)
148
Lubrication
Drive Chain
Servicing Your Honda
Saf ety Precautions
Lubricate every 500 miles (800 km) orsooner if chain appears dry. Lubricant:
Refer to on page .
Recheck drive chain slack (page ).
Check rear axle alignment by makingsure the chain adjuster index mark ( )aligns with the scale graduations ( ) onboth sides of the swingarm.Both marks should correspond. If theaxle is misaligned, turn the right or leftadjusting bolt until the marks arealigned and recheck chain slack.Tighten the rear axle nut to thespecified torque:
If a torque wrench is not used for thisinstallation, see your Honda dealer assoon as possible to verify properassembly. Improper assembly may leadto a loss of braking capacity.
Tighten the drive chain adjusting boltslightly by turning it counterclockwise,then tighten the drive chain lock nuts byholding the drive chain adjusting boltswith a wrench.
5.
6.
7.
8.
45
144
70
07/01/08 17:54:20 31MFJ600 0157
-
RK525ROZ6
DID525HVor
149
Removal, Cleaning &Replacement
Drive Chain
Servicing Your Honda
Saf ety Precautions
Lubricate only with SAE 80 or 90 gear oil.Commercial chain lubricants may containsolvents which could damage the rubberO-rings.
Refer to on page .
Your motorcycle has an endless (rivetedmaster link) type chain. It should only beremoved or replaced by your Honda dealer.
The O-rings can be damaged by steamcleaning, high pressure washers, andcertain solvents.
Clean the side surfaces of the chainwith a dry cloth. Use a high flashpointsolvent such as kerosene notgasoline.Do not brush the rubber O-rings.Brushing will damage them. Use of asolvent may also damage the O-rings.Inspect the drive chain for possiblewear or damage.
Replace the drive chain if it has damagedrollers, loose fitting links, damagedO-rings, or otherwise appearsunserviceable.Replacement Chain:
1.
2.70
07/01/08 17:54:32 31MFJ600 0158
150
WARNING:
Wash hands after handling.
Battery
Servicing Your Honda
Your battery is a maintenance-f ree typeand can be permanently damaged if thecap strip is removed.
Battery Charging,
Battery Storage,
Your motorcycle has a maintenance-freetype battery. You do not have to check thebattery electrolyte level or add distilledwater as you would with a conventional-type battery.
If you do not expect to ride yourmotorcycle for at least two weeks, werecommend you remove the battery –– orat least disconnect the battery cables(negative cable first).
Electrical accessories use current from thebattery –– even when the ignition is OFF.Limited operation also allows the batteryto discharge. If you have electricalaccessories on your motorcycle –– or donot ride frequently, we recommend thatyou charge the battery frequently (see
page ).
If you plan to store your motorcycle, seepage .
If your battery seems weak and/or isleaking electrolyte (causing slow startingor other electrical problems), see yourHonda dealer.
Battery posts, terminals andrelated accessories contain lead and leadcompounds.
154
151
07/01/08 17:54:41 31MFJ600 0159
The battery gives off explosivehydrogen gas during normaloperation.
A spark or flame can cause thebattery to explode with enoughforce to kill or seriously hurt you.
Wear protective clothing and aface shield, or have a skilledmechanic do the batterymaintenance.
151
Battery Storage
Battery
Servicing Your Honda
Saf ety Precautions
BatteryCharging,
Refer to on page .
If you plan to store your motorcycle, werecommend you remove the battery andstore it where it can be charged at leastevery 30 days to maintain its service life.
If you do not remove the battery, werecommend disconnecting the batterycables (negative cable first).
You will get the best storage results fromremoving the battery and slow (trickle)charging it every 30 days (see
page ).
Before you remove the battery, be sure toread all the information that follows, aswell as the information on the batterylabel.70
154
07/01/08 17:54:51 31MFJ600 0160
-
+
-+
(1)
UNDER FRONT SEAT
(3) (2) (4)
(1) ring(2) rubber band(3) negative ( ) terminal lead(4) positive ( ) terminal lead(5) battery
(5)
152
Battery
Servicing Your Honda
The battery is located in the battery boxbelow the front seat.
Pull the battery ( ) out of the batterybox.
Disconnect the negative ( ) terminallead ( ) from the battery first, thendisconnect the positive ( ) terminallead ( ).
Release the ring ( ) and remove therubber band ( ).
Remove the front seat (page ).Make sure the ignition switch is OFF.
Removal1.2.3.
4.
5.
861
2
3
45
07/01/08 17:55:03 31MFJ600 0161
+-
153
Battery
Servicing Your Honda
Charge the battery (see followingsection), unless you have been ridingregularly.Store your battery in an easy-to-reachlocation off the floor, in an areaprotected from freezing temperaturesand direct sunlight.Clean the battery box after removingthe battery for storage. Dry the batterybox and, if paint is missing, re-paint thearea.Slow charge the battery (see followingsection) once every 30 days.
InstallationReinstall in the reverse order of removal.Be sure to connect the positive ( )terminal first, then the negative ( )terminal.Check all bolts and other fasteners aresecure.
6.
7.
8.
9.
1.
2.
07/01/08 17:55:13 31MFJ600 0162
(1) ‘‘trickle’’ charger
(1)
154
Battery Charging
Battery
Servicing Your Honda
Saf ety Precautions
We recommend using a ‘‘trickle’’ charger( ) for home charging. These units can beleft connected for long periods withoutrisking damage to the battery. However,do not intentionally leave the chargerconnected longer than the time periodrecommended in the charger’s instructions.
Avoid using an automotive-type batterycharger. An automotive charger canoverheat a motorcycle battery and causepermanent damage.
Refer to on page .
Be sure to read the information that camewith your battery charger and follow theinstructions on the battery. Impropercharging may damage the battery.
1
70
07/01/08 17:55:21 31MFJ600 0163
---
-
155
General Recommendations
Appearance Care
Servicing Your Honda
Saf ety Precautions
Frequent cleaning and polishing will keepyour Honda looking newer longer.Frequent cleaning also identifies you as anowner who values your motorcycle. Aclean motorcycle is also easier to inspectand service.
Refer to on page .
To clean your motorcycle, you may use:watera mild, neutral detergent and watera mild spray and wipe cleaner/polishera mild spray and rinse cleaner/degreaser and water
Avoid products that contain harshdetergents or chemical solvents thatcould damage the metal, paint, andplastic on your motorcycle.If your motorcycle is still warm fromrecent operation, give the engine andexhaust system time to cool off.Park in a shady area. Washing yourmotorcycle in bright sunlight may causethe finish to fade because water dropletsintensify the sun’s brightness. Spottingis also more likely because surfacewater can dry before you have time towipe it off.Clean your motorcycle regularly toprotect surface finishes.
(cont’d)
70
07/01/08 17:55:32 31MFJ600 0164
(1) air intake
(1)
156
Appearance Care
Servicing Your Honda
High pressure water (or air) can damagecertain parts of your motorcycle.
We recommend the use of a gardenhose to wash your motorcycle. Highpressure washers (like those at coin-operated car washes) can damagecertain parts of your motorcycle.
After cleaning, inspect for damage,wear, and leaks (fuel, oil, coolant, andbrake fluid).
Do not direct water at the air intake ( ).The water could enter the air cleaner orbe drawn into the throttle body.
1
07/01/08 17:55:40 31MFJ600 0165
157
Washing Your Motorcycle with aMild Detergent
Appearance Care
Servicing Your Honda
Saf ety PrecautionsRefer to on page .
Rinse your motorcycle thoroughly withcool water to remove loose dirt.Fill a bucket with cool water. Mix in amild, neutral detergent, such as dishwashing liquid or a product madeespecially for washing motorcycles orautomobiles.Wash your motorcycle with a sponge ora soft towel. As you wash, check forheavy grime. If necessary, use a mildcleaner/degreaser to remove the grime.Clean the windscreen with a soft clothor sponge and plenty of water. Dry witha soft clean cloth. Remove minor
scratches with a commercially-availableplastic polishing compound.Take care to keep brake fluid orchemical solvents off the fairing. Theywill damage the plastic.Clean the headlight, fairing, meter lensand other plastic parts using a cloth orsponge dampened with a solution ofmild detergent and water. Whencleaning the plastic headlight lens, usemore care because it will scratch easierthan a glass lens. Rub any soiled area,gently rinsing it frequently with freshwater.
(cont’d)
1.
2.
3.
4.
5.70
07/01/08 17:55:51 31MFJ600 0166
158
Spray Cleaning Your Motorcycle
Appearance Care
Servicing Your Honda
Saf ety Precautions
After washing, rinse your motorcyclethoroughly with plenty of clean water toremove any residue. Detergent residuecan corrode alloy parts.Dry your motorcycle with a chamois ora soft towel. Leaving water on thesurface to air dry can cause dulling andwater spots. As you dry, inspect forchips and scratches.Lubricate the drive chain to preventrusting.Start the engine and let it idle forseveral minutes. The engine heat willhelp dry moist areas.As a precaution, ride your motorcycle ata slow speed and apply the brakesseveral times. This will help dry thebrakes and restore normal brakingperformance.
Refer to on page .
Avoid using spray cleaner products on thetires or suspension components.
Suggestions for using spray cleaner(s)follow:8.
9.
7.
10.
70
6.
07/01/08 17:56:02 31MFJ600 0167
Apply a spray cleaner/polish and wipe thepaint, chrome, glass, and clear plastic.
Dust and fingerprint smudges.
Light road grime. Spray any difficult-to-reach or very dirtyareas with a spray cleaner/degreaser.Rinse and dry.Apply a spray cleaner/polish and wipe witha non-abrasive cloth.Use a spray cleaner/degreaser.If necessary, rub with a sponge. Rinse anddry.Apply a spray cleaner/polish and wipe witha non-abrasive cloth.Apply a high quality chrome/aluminumpolish and wipe with a non-abrasive cloth.
Heavy grime. Oil leaks. Brakedust.
Dull, corroded chrome oraluminum.
Recommended CleaningMotorcycle Condition
159
Appearance Care
Servicing Your Honda
07/01/08 17:56:13 31MFJ600 0168
160
Painted Aluminum WheelMaintenance
Clean the Matte Painted Surface
Appearance Care
Servicing Your Honda
Saf ety PrecautionsSaf ety Precautions
Refer to on page .
Aluminum may corrode from contact withdirt, mud, or road salt. Clean the wheelsafter riding through any of thesesubstances. Use a wet sponge and milddetergent. Avoid stiff brushes, steel wool,or cleaners containing abrasives orchemical compounds.
After washing, rinse with plenty of waterand dry with a clean cloth.
If the paint is chipped, apply touch-uppaint.
Refer to on page .
Use a soft cloth or sponge, plenty of water,and a mild detergent to clean the mattepaint. Dry with a soft, clean cloth.
Do not use polishing compounds or waxcontaining polishing compounds. Thesecan damage or discolor the paint.
To keep your Honda looking new, cleanand polish it frequently.
7070
07/01/08 17:56:23 31MFJ600 0169
161
Exhaust Pipe And MufflerMaintenance
Appearance Care
Servicing Your Honda
Saf ety Precautions
To remove mud or dust, use a wet spongeand a liquid kitchen abrasive, then rinsewell with clean water. Dry with chamoisor a soft towel.
The exhaust pipe and muffler are stainlesssteel but may become stained by mud ordust.
Refer to on page .
If necessary, remove heat stains by using acommercially available fine texturecompound. Then rinse by the samemanner as removing mud or dust.
70
07/01/08 17:56:31 31MFJ600 0170
162
Finishing Touches
Appearance Care
Servicing Your Honda
Saf ety Precautions
If a surface on your motorcycle is chippedor scratched, your Honda dealer has touch-up paint to match your motorcycle’s color.Be sure to use your motorcycle’s colorcode (page ) when you buy touch-uppaint.
If the frame has a chip that exposes themetal, first apply primer (to preventcorrosion) and then apply the touch-uppaint. Several thin layers of touch-up paintare better than one thick coat.
Refer to on page .
After washing your motorcycle, considerusing a commercially-available spraycleaner/polish or quality liquid or pastewax to finish the job. Use only a non-abrasive polish or wax made specificallyfor motorcycles or automobiles. Apply thepolish or wax according to the instructionson the container.
20270
07/01/08 17:56:38 31MFJ600 0171
163
Tips
Tips
Here’s a few helpful tips on how to storeand transport your Honda, and how to bean environmentally responsiblemotorcycle owner.
...........................Storing Your Honda ...........Transporting Your Motorcycle .
.....................You & the Environment .
164167168
07/01/08 17:56:45 31MFJ600 0172
164
Preparation for Storage
Storing Your Honda
Tips
Saf ety Precautions
Honda Motorcycle Winter StorageGuide,
If you won’t be riding for an extendedperiod, such as during the winter,thoroughly inspect your motorcycle andcorrect any problem before storing it. Thatway, needed repairs won’t be forgottenand it will be easier to get your motorcyclerunning again.
Refer to on page .
We suggest you perform the followingprocedures to keep your motorcycle in topcondition. These storage procedures willreduce the deterioration that can occurduring storage.
For more information about storage, referto the
available from your Honda dealer(USA only).
Change the engine oil and filter (page).
Make sure the cooling system is filledwith a 50/50% antifreeze solution (page
).Fill the fuel tank. Make sure the fuel fillcap is properly installed.
1.
2.
3.104
70
99
07/01/08 17:56:56 31MFJ600 0173
-
165
Storing Your Honda
Tips
To prevent rusting in the cylinders,perform the following:
Remove the ignition coil connectorsand ignition coils from the sparkplugs. Using tape or string, secure theconnectors to any convenient plasticbody part so that they are positionedaway from the spark plugs.
Remove the battery and charge it fully.Store it in an area protected fromfreezing temperatures and directsunlight. Slow charge the battery (page
) once a month.
Reinstall the spark plugs, ignitioncoils and ignition coil connectors.
With the engine stop switch in theRUN position, press the start buttonseveral times to crank the engine anddistribute the oil.
Pour a tablespoon (15 20 cc) ofclean engine oil into each cylinderand cover the spark plug holes with apiece of cloth.
Remove the spark plugs from theengine and store them in a safe place.Do not connect the ignition coils tothe ignition coil connectors.
(cont’d)
Wash and dry your motorcycle. Wax allpainted surfaces (except matte paintedsurfaces). Apply rust-inhibiting oil tothe chrome pieces.
5.
6.
4.
154
07/01/08 17:57:07 31MFJ600 0174
166
Removal from Storage
Storing Your Honda
Tips
Saf ety Precautions
Inflate the tires to their recommendedpressures (page ).Store your motorcycle in an unheatedarea, free of dampness, away fromsunlight, with a minimum of dailytemperature variation.
Refer to on page .
Uncover and clean your motorcycle.If your motorcycle has been stored formore than four months –– change theengine oil (page ).If your motorcycle has been stored formore than two months –– ask yourHonda dealer to drain and replace thefuel.Charge the battery (page ) asrequired. Install the battery.
Perform a pre-ride inspection (page ),then test-ride your motorcycle at lowspeeds.
Lubricate the drive chain (page ).
Lubricate the drive chain (page ).
Place your motorcycle on blocks to liftboth tires off the floor.Cover your motorcycle with a porousmaterial. Avoid using plastic or similarnon-breathing, coated materials thatrestrict air flow and allow heat andmoisture to accumulate.
1.2.
3.
4.
5.6.
7.8.
9.
10.
11.
148
13570
154
14843
99
07/01/08 17:57:23 31MFJ600 0175
167
Transporting Your Motorcycle
Tips
If your motorcycle needs to be transported,it should be carried on a motorcycle trailer,or a truck or trailer with a flatbed area. Forinformation about 24-hour emergencyassistance, see page (USA only). Donot tow your motorcycle, as towing canseriously damage the transmission.
When contacting a towing or transportingservice, be sure to ask if they have aflatbed area, a loading ramp or powerramp to safely lift the motorcycle, andmotorcycle tie-down straps.
229
07/01/08 17:57:28 31MFJ600 0176
168
Choose Sensible Cleaners.
Recycle Wastes.
You & the Environment
Tips
Owning and riding a motorcycle can beenjoyable, but you must do your part toprotect nature.
Following are tips on how you can be anenvironmentally-responsible motorcycleowner.
Use abiodegradable detergent when you washyour motorcycle. Avoid aerosol spraycleaners that containchlorofluorocarbons (CFCs) whichdamage the atmosphere’s protectiveozone layer. Don’t throw cleaningsolvents away; see the followingguidelines for proper disposal.
It’s illegal andthoughtless to put used engine oil in thetrash, down a drain, or on the ground.Used oil, gasoline, coolant, andcleaning solvents contain poisons thatcan hurt refuse workers andcontaminate our drinking water, lakes,rivers, and oceans. Before changingyour oil, make sure you have the propercontainers. Put oil and other toxicwastes in separate sealed containers andtake them to a recycling center. Callyour local or state office of publicworks or environmental services to finda recycling center in your area, and toget instructions on how to dispose ofnon-recyclable wastes.
07/01/08 17:57:34 31MFJ600 0177
169
Taking Care of the Unexpected
Taking Care of the Unexpected
This section discusses the more commonproblems that can occur with yourmotorcycle while you’re riding. It tellsyou how to evaluate each problem andwhat actions you can take to try to resumeriding. If the problem cannot be safelysolved, this section also gives instructionson the proper way to have yourmotorcycle transported.
For information about transporting yourmotorcycle, see page .
.............................General Guidelines .If Your Engine Quits or
.........................................Won’t Start .......................If You Have a Flat Tire .
..................If Your Engine Overheats .If the Low Oil Pressure Indicator
..................................................Lights .
.......................If You Lose Your Key ........................................If You Crash .
...................................If a Fuse Blows .
......If Your Battery Is Low (or Dead) .167
170
171176189
191192196197198
07/01/08 17:57:46 31MFJ600 0178
170
General Guidelines
Taking Care of the Unexpected
Taking Care of the Unexpected
Remember to take along your owner’smanual, the tool kit that came with yourmotorcycle, and any other items (such astire repair supplies and additional tools)that might help you solve a problem onyour own.
Should you ever have a problem whileriding, please follow these guidelines:
Always put personal safety first.Take time to assess the situation andyour options before deciding what to do.If the problem is relatively minor andyou have the tools, supplies, and skillsto make a temporary repair, be sure tohave permanent repairs made as soon aspossible.Do not continue riding if you are hurt oryour motorcycle is not in safe ridingcondition.
Additional recommendations for specificproblems follow.
Keeping your motorcycle well-maintainedis the best way to reduce the possibility ofhaving a problem on the road. However,since problems can arise even with well-maintained machines, you may considersubscribing to an emergency roadsideservice plan. (USA only: For informationabout the Honda Rider’s Club of America,see page .)229
07/01/08 17:57:57 31MFJ600 0179
--
171
If Your Engine Quits or Won’t Start
Taking Care of the Unexpected
Starter motor doesn’t operate
Starter motor works,but the engine won’t start
Proper operation and maintenance canprevent starting and engine performanceproblems. In many cases, the cause of theproblem may be a simple operationaloversight.
If you have a problem starting theengine or experience poor engineperformance the following informationmay help you. If you can’t correct theproblem, see your Honda dealer.
If your motorcycle won’t start, listen asyou press the start button. If you don’thear the starter motor turning, refer to the
symptom. Ifyou can hear the starter motor workingnormally, refer to the
symptom.
07/01/08 17:58:03 31MFJ600 0180
SYMPTOM:WHAT TO DOPOSSIBLE CAUSE
ignition switch OFF Turn the ignition switch ON.transmission not in neutral Shift into neutral.side stand down (whentransmission not in neutral)
Put the transmission in neutral or raise the sidestand and pull the clutch lever in.
blown fuse Replace with a new fuse of the same rating (page).
battery lead loose Tighten the battery lead.low (or dead) battery Charge the battery (page ). If charging doesn’t
help, see your Honda dealer.faulty starter motor If all possible causes are negative, the starter
motor may be faulty. See your Honda dealer.
192
154
Starter motor doesn’t operate.
172
If Your Engine Quits or Won’t Start
Taking Care of the Unexpected
07/01/08 17:58:19 31MFJ600 0181
WHAT TO DOPOSSIBLE CAUSESYMPTOM:
weak battery Charge the battery (page ). If charging doesn’thelp, see your Honda dealer.
loose battery cables
loose or unconnectedignition coil connectors andignition coils
Tighten the battery terminal bolts.
Install the ignition coil connectors and ignition coilssecurely. If the engine still won’t start, see yourHonda dealer.
flooded engine See (page ).Fill the fuel tank.out of fuelTurn the engine stop switch to RUN.engine stop switch OFF
53
154
Starter motor works, but the engine won’t start.
Flooded Engine
173
If Your Engine Quits or Won’t Start
Taking Care of the Unexpected
07/01/08 17:58:34 31MFJ600 0182
WHAT TO DOPOSSIBLE CAUSESYMPTOM:
Raise the side stand. Start again.
SYMPTOM:POSSIBLE CAUSE WHAT TO DO
side stand down
blubbers (rich fuel mixture) See your Honda dealer.See your Honda dealer.
runs erratically, misfires May damage catalytic converter.
low oil pressure Check the low oil pressure indicator. Refer topage
.
overheating Check the coolant temperature meter. Refer topage .
idles roughly, too fast, stalls See your Honda dealer.
191
189
Engine starts, but stalls as you shift into gear.
Engine starts, but runs poorly.
Ifthe Low Oil Pressure Indicator Lights,
IfY our Engine Overheats,
174
If Your Engine Quits or Won’t Start
Taking Care of the Unexpected
07/01/08 17:58:51 31MFJ600 0183
WHAT TO DOPOSSIBLE CAUSESYMPTOM:
sooty exhaust (rich fuelmixture)detonates or pings underload
See your Honda dealer.
If applicable, switch to the recommended octanegasoline (page ) or change your brand ofgasoline. If the problem persists, see your Hondadealer.
See your Honda dealer.pre-ignition (runs on afterignition switched OFF)
See your Honda dealer.afterfires (backfires) May damage catalytic converter.
May damage catalytic converter.
91
Engine starts, but runs poorly (cont’d).
175
If Your Engine Quits or Won’t Start
Taking Care of the Unexpected
07/01/08 17:59:05 31MFJ600 0184
176
If You Have a Flat Tire
Taking Care of the Unexpected
A flat tire is always unwelcome,especially if you are far from help. If youthink you are losing air, or you hit apothole or hard object, pull safely to theside of the road so you can inspect thetires and assess the situation. (Be sure topark on a firm, level surface and use theside stand for support.) You shouldexamine the tire treads and sidewalls forforeign objects or damage. If you find atire that has been punctured or damaged,you have two options.
Option 1:Have Your Motorcycle TransportedIf a tire has a major puncture or a cut inthe tread or sidewall, or the bead has comeloose from the rim, there is probably notmuch you can do except have yourmotorcycle transported to a Honda dealer
or other qualified service facility. (USAonly: For information about 24-houremergency roadside assistance, see page
.) Even with a simple puncture, thismay be the safest and least troublesomesolution. For transporting instructions, seepage .
Option 2:Make a Temporary Roadside RepairIf a tire has only a minor nail puncture andis not completely flat, you may be able tomake an emergency repair that couldallow you to continue riding to where youcan get the tire replaced or permanentlyrepaired.
229
167
07/01/08 17:59:13 31MFJ600 0185
Riding your motorcycle with atemporary tire repair can be risky.If the temporary repair fails, youcan crash and be seriously injuredor killed.
If you must ride with a temporarytire repair, ride slowly andcarefully and do not exceed 30mph (50 km/h) until the tire ispermanently repaired or replaced.
177
Types of Temporary Repairs
If You Have a Flat Tire
Taking Care of the Unexpected
Due to the uncertainty of any temporaryrepair, you should ride slowly (not over30 mph, 50 km/h) and carefully(preferably without a passenger or cargo)until the tire is replaced or permanently
repaired. Stop frequently and check the airpressure. If the tire is losing pressure, itmay be unsafe to continue riding. As thetire gets low, it will affect the handling ofyour motorcycle (especially with apassenger and cargo), and it may overheatand blow out.
The following types of temporary repairsgenerally require a source of air to inflatethe tire. Possible sources include COcartridges or cans of compressed airdesigned to inflate a tire.
2
07/01/08 17:59:21 31MFJ600 0186
178
Should You Repair or Replace aTire?
If You Have a Flat Tire
Taking Care of the Unexpected
Inflate the tire:
Plug the hole:
Tubeless tires havesome self-sealing ability if they arepunctured and the result is usually just aslow leak. If this is the case, you can tryinflating the tire to see if it will hold airpressure. If you can see a nail or otherobject embedded in the tire tread, do notremove it at this time.
The idea here is to dosomething to temporarily stop the leak.If you have a tubeless tire repair kit,you can pull out the nail and tryinserting an external plug in thepuncture. Follow the instructions thatcame with the repair kit and be sure toinflate the tire to the correct pressure.
We strongly recommend that you replace,not permanently repair, any tire that ispunctured or damaged, even if the tire hasonly a minor puncture. For a fulldiscussion of repairs and replacement, seepage .138
07/01/08 17:59:28 31MFJ600 0187
(2)
(1)
RIGHT SIDE
(1) caliper fixing bolts(2) brake caliper
179
Emergency Front WheelRemoval/Installation
If You Have a Flat Tire
Taking Care of the Unexpected
Saf ety PrecautionsRefer to on page .
We recommend wheel removal be doneonly by your Honda dealer or anotherqualified mechanic. Do not attempt toremove the wheel on your own. Wheelremoval requires mechanical skill andprofessional tools.
Park your motorcycle on a firm, levelsurface.
Removal
(cont’d)
1.
70
07/01/08 17:59:37 31MFJ600 0188
RIGHT FRONT
(4)
(3)(3) axle pinch bolts(4) front axle bolt
180
If You Have a Flat Tire
Taking Care of the Unexpected
Raise the front wheel off the ground byplacing a support block under theengine.
To avoid damage to the brake hoseduring removal, support the caliperassembly so that it doesn’t hang fromthe hose. Do not twist the brake hose.Avoid getting grease, oil, or dirt onthe disc or pad surfaces. Anycontamination can cause poor brakeperformance or rapid pad wear afterreassembly.
Loosen the right and left axle pinchbolts ( ) and remove the front axle bolt( ).
Remove the caliper fixing bolts ( ) andremove the right and left brake calipers( ) from the fork legs.
4.2.
3.4
3
1
2
07/01/08 17:59:47 31MFJ600 0189
LEFT FRONT
(5)(3)
(3) axle pinch bolts(5) front axle shaft
181
If You Have a Flat Tire
Taking Care of the Unexpected
Remove the front axle shaft ( ), wheeland side collars.
Avoid depressing the brake leverwhen the wheel is off the motorcycle.This will force the caliper pistons outof the cylinders. The result will beloss of brake fluid. If this occurs, thebrake system will require service. Seeyour Honda dealer for this service.
5. 5
07/01/08 17:59:53 31MFJ600 0190
16 lbf·ft (22 N·m , 2.2 kgf·m)
44 lbf·ft (59 N·m , 6.0 kgf·m)
33 lbf·ft (45 N·m , 4.6 kgf·m)
LEFT FRONT
(1) end of axle shaft(2) surface of fork leg
(3) front forkspacers
(2)
(1)
(3)
182
If You Have a Flat Tire
Taking Care of the Unexpected
Tighten the axle pinch bolts on the leftfork leg to the specified torque:
Tighten the front axle bolt to thespecified torque:
Make sure that the front fork spacers( ) are installed into the caliper bracketproperly.Install the right and left brake calipersonto the fork legs.To avoid damaging the brake pads,carefully fit the brake disc ( ) betweenthe pads.Install the caliper fixing bolts andtighten to the specified torque:
Install the side collars and position thewheel between the fork legs. Insert thefront axle shaft from the left side,through the left fork leg and wheel hub.
Installation
Align the end of axle shaft ( ) with thesurface of fork leg ( ).
4.
2.
3.
5.
6.
7.
1.
12
3
4
07/01/08 18:00:05 31MFJ600 0191
16 lbf·ft (22 N·m , 2.2 kgf·m)
(5) (5)
(4)
(4) brake disc (5) brake caliper body
183
If You Have a Flat Tire
Taking Care of the Unexpected
Visually check that the clearancesbetween each surface of the brake discand the brake caliper body (not thebrake pads) are symmetrical.
Tighten the axle pinch bolts on the rightfork leg to the specified torque:
If the clearances are not symmetrical,loosen the left axle pinch bolts and pullthe left fork outward or push inward toadjust the clearance. Then follow thenext step.
If the clearances between each surfaceof the brake disc and the brake caliperbody ( ) (not the brake pads) aresymmetrical, follow next step.
Operate the front brake and pump thefork several times. Check for freewheel rotation after the brake isreleased. Recheck the wheel if the brakedrags or the wheel does not rotate freely.
9.
10.
8.
5
07/01/08 18:00:15 31MFJ600 0192
184
If You Have a Flat Tire
Taking Care of the Unexpected
If a torque wrench was not used forinstallation, see your Honda dealer as soonas possible to verify proper assembly.Improper assembly may lead to loss ofbraking capability.
07/01/08 18:00:19 31MFJ600 0193
RIGHT REAR(1) (3)
(2)(7)
(1) rear axle nut(2) drive chain lock nut(3) drive chain adjusting bolt(7) right chain adjustment plate
185
Emergency Rear WheelRemoval/Installation
If You Have a Flat Tire
Taking Care of the Unexpected
Saf ety PrecautionsRefer to on page .
We recommend wheel removal be doneonly by your Honda dealer or anotherqualified mechanic. Do not attempt toremove the wheel on your own. Wheelremoval requires mechanical skill andprofessional tools.
Raise the rear wheel off the ground byplacing a support block under theengine.
Park your motorcycle on a firm, levelsurface.
Removal
(cont’d)Loosen the rear axle nut ( ).
Loosen the drive chain lock nuts ( )and turn the drive chain adjusting bolts( ) so the rear wheel can be moved allthe way forward for maximum drivechain slack.Remove the rear axle nut and washer.
3.
4.
5.
1.
2.
2
3
70
1
07/01/08 18:00:33 31MFJ600 0194
LEFT REAR
(2)
(3)(5) (6)
(4)
(2) drive chain lock nut(3) drive chain adjusting bolt(4) drive chain(5) rear axle shaft(6) left chain adjustment plate
186
If You Have a Flat Tire
Taking Care of the Unexpected
Remove the drive chain ( ) from therear wheel sprocket by pushing the rearwheel forward.
To avoid damage to the brake hoseduring removal, support the caliperassembly so that it doesn’t hang fromthe hose. Do not twist the brake hose.
Remove the rear axle shaft ( ), rearwheel, left chain adjustment plate ( ),right chain adjustment plate ( ), rearbrake bracket and side collars from theswingarm.
Avoid depressing the brake pedalwhen the wheel is off the motorcycle.This will force the caliper piston outof the cylinder. The result will be aloss of brake fluid. If this occurs, thebrake system will require service.See your Honda dealer for thisservice.
6. 7.6
7
54
07/01/08 18:00:42 31MFJ600 0195
(1) lug(2) slot
(3) swingarm
(1)
(2)
(3)
187
If You Have a Flat Tire
Taking Care of the Unexpected
Install the side collars and position thewheel and rear brake bracket.
Installation
While installing the wheel, carefullyfit the brake disc between the brakepads to avoid damaging the pads.Avoid getting grease, oil, or dirt onthe disc or pad surfaces. Anycontamination can cause poor brakeperformance or rapid pad wear afterreassembly.
(cont’d)
Make sure that the lug ( ) on the rearbrake bracket is located in the slot ( )on the swingarm ( ).
2.1.
12
3
07/01/08 18:00:52 31MFJ600 0196
83 lbf·ft (113 N·m , 11.5 kgf·m)
188
If You Have a Flat Tire
Taking Care of the Unexpected
Insert the rear axle shaft from the leftside, through the left swingarm, wheelhub and rear brake bracket.Install the drive chain by pushing therear wheel forward.Install the rear axle nut and tighten thedrive chain adjusting bolts.Refer to drive chain adjustment (page
).
Failure to provide adequate disc-to-rearbrake bracket clearance may damagethe brake discs and impair brakingefficiency.
After installing the wheel, apply thebrakes several times, then recheck bothdiscs for caliper holder to disc clearance.Do not operate the motorcycle withoutadequate clearance.
Tighten the rear axle nut to thespecified torque:
If a torque wrench was not used forinstallation, see your Honda dealer as soonas possible to verify proper assembly.Improper assembly may lead to loss ofbraking capability.
4.
3.
5.
6.
7.
146
07/01/08 18:01:02 31MFJ600 0197
189
If Your Engine Overheats
Taking Care of the Unexpected
Continuing to ride with an overheatedengine can cause serious engine damage.
A steaming engine indicates a coolantleak. Shut the engine off and wait untilthe steaming stops. Look for a leak, butdon’t touch the engine or radiatorsystem. Let everything cool off first.
Normally, the coolant temperature on yourtemperature meter will rise and then leveloff. Hot weather may cause thetemperature to rise higher than normal. Sowill temporary stress such as climbing ahill. If you’re stuck in stop-and-go traffic,the temperature may climb some, but theradiator fan is designed to preventoverheating. Be aware of these variationsas you monitor the meter.
If there’s no obvious problem, leave theengine on so the fan and coolantcirculating system can continueworking. Monitor the temperature meter.The temperature may drop to thenormal range after a brief stop with noload on the engine.
(cont’d)
If the coolant temperature display beginsto flash and the high coolant temperatureindicator comes on for no apparent reason,pull safely to the side of the road. Ifpossible, park in a shady area.
07/01/08 18:01:10 31MFJ600 0198
190 Taking Care of the Unexpected
If Your Engine Overheats
Check the radiator fan.If the fan is not working, turn theengine off. Open the fuse box (page
) and check the radiator fan fuse. Ifthe fuse is blown, replace it with theproper (same rating) spare fuse. Startthe engine. If the coolant temperaturedisplay flashes and the high coolanttemperature indicator comes on, turnthe engine off.If the radiator fan is working, visuallycheck the coolant level in the reservetank, located behind the lower fairing(page ). It isn’t necessary to touchthe radiator system.If the reserve tank is low or empty, don’tride without adding coolant (page ).After adding coolant, turn the engine onand check the temperature meter.If the temperature doesn’t drop, do not
ride. The engine needs repair. Transportyour motorcycle to a Honda dealer(page ).If the temperature drops to normal,check the coolant level. If it has gonedown, add more coolant.
If you are able to resume riding, continueto monitor the meter frequently.
If there’s a mild leak, you can ride forawhile, carefully watching the meter. Beprepared to stop and add more coolant orwater. If the leak is bad, transport yourmotorcycle to a Honda dealer (page ).
88
105
167
167
194
07/01/08 18:01:18 31MFJ600 0199
191
If the Low Oil Pressure Indicator Lights
Taking Care of the Unexpected
Continuing to ride with low oil pressurecan cause serious engine damage.
If you check your engine oil levelregularly, you should never see the low oilpressure indicator while riding. Normally,it will only light momentarily when youturn the ignition switch ON. Occasionally,it may flicker at or near idling speed.
Low oil pressure may be caused by an oilleak, a low oil level, or some problem inthe engine’s lubrication system.
If the indicator comes on while you’reriding, don’t ignore it. Pull safely to theside of the road. If possible, pull the clutchlever in and coast to a stop. Stop theengine as soon as it’s safe to do so.
Check for an oil leak.Then check the oil level. If necessary,add the recommended oil (page ) tothe upper level mark. If you must leaveyour motorcycle to get oil, secure it asmuch as possible.After adding oil, start the engine, andcheck that the low oil pressure indicatorgoes off. Check for a possible leak.
If the indicator goes off and there is noleak –– resume riding. If there is a leak ––do not ride the motorcycle until the leak isrepaired by a Honda dealer.
98
07/01/08 18:01:27 31MFJ600 0200
30A10A, 20A
main fuseother fuses
192
If a Fuse Blows
Taking Care of the Unexpected
All of the electrical circuits on yourmotorcycle have fuses to protect themfrom damage caused by excess currentflow (short circuit or overload).
If something electrical on your motorcyclestops working, the first thing you shouldcheck for is a blown fuse.Determine from the chart on the circuitfuse box cover which fuse or fuses controlthat component. Check those fuses first,but check all the fuses before lookingelsewhere for another possible cause ofthe problem. Replace any blown fuses andcheck component operation.
Main fuse (and spare) are located on thestarter motor magnetic switch under thefront seat.The circuit fuse box (including sparefuses) is located under the front seat.
Recommended Fuses
To prevent an accidental short circuit,turn the ignition switch OFF beforechecking or replacing the fuses.Remove the front seat (page ).
1.
2. 86
07/01/08 18:01:39 31MFJ600 0201
UNDER FRONT SEAT
(1)
MAIN FUSE
(2)(3)(5)
(4)
(4) blown fuse(1) main fuse(2) wire connector(3) starter magnetic switch(5) spare main fuse
193
If a Fuse Blows
Taking Care of the Unexpected
Main Fuse Access:
Reconnect the wire connector.
To access the main fuse ( ), disconnectthe wire connector ( ) of the startermagnetic switch ( ).Pull the main fuse out. If it is blown ( ),install the spare main fuse ( ).
(cont’d)
3.
4.
5.
21
3
54
07/01/08 18:01:50 31MFJ600 0202
(9)
(7)
(6) tabs(7) fuse box cover(9) spare fuses
(6)
UNDER FRONT SEAT
194
If a Fuse Blows
Taking Care of the Unexpected
Circuit Fuse Access:
Replacing a f use with one that has ahigher rating greatly increases the chanceof damage to the electrical system.
Release the tabs ( ), then remove thefuse box cover ( ).To check or replace a circuit fuse, pullthe old fuse out of its retaining clips.Look for a burned wire inside the fuse.If the fuse is blown ( ), replace it witha spare fuse ( ) of the same rating.
If you do not have a replacement fuse withthe proper rating for the circuit, install onewith a lower rating.
6.
7.
67
89
07/01/08 18:02:00 31MFJ600 0203
CIRCUIT FUSE (8)
(8) blown fuse
195
If a Fuse Blows
Taking Care of the Unexpected
If you do not have a spare fuse and youcannot ride the motorcycle without fixingthe problem, take a fuse of the same ratingor a lower rating from one of the othercircuits that you can do withouttemporarily.
If you replace a blown fuse with a sparefuse that has a lower rating, replace thefuse with the correct rating as soon as youcan. Also remember to replace any sparefuses that were installed.
If the replacement fuse of the same ratingburns out in a short time, there is probablya serious electrical problem on yourmotorcycle. Leave the blown fuse in thatcircuit and have your motorcycle checkedby your Honda dealer.
Install the front seat.Install the fuse box cover.8.
9.
07/01/08 18:02:09 31MFJ600 0204
196
If You Crash
Taking Care of the Unexpected
Transporting Your Motorcycle,
Personal safety is your first priority afterany accident. If you or anyone else hasbeen injured, take time to assess theseverity of the injuries and whether it issafe to continue riding. Call foremergency assistance if needed. Alsofollow applicable laws and regulations ifanother person or vehicle is involved inthe accident.
If you decide you are capable of ridingsafely, carefully inspect your motorcyclefor damage and determine if it is safe toride. Check the tightness of critical nutsand bolts securing such parts as thehandlebar, control levers, brakes, andwheels.
If there is minor damage, or you areunsure about possible damage, ride slowlyand cautiously. Sometimes, crash damageis hidden or not immediately apparent, soyou should have your motorcyclethoroughly checked at a qualified servicefacility as soon as possible. Also, be sureto have your Honda dealer check theframe and suspension after any seriouscrash.
If your motorcycle cannot be ridden, seepage .167
07/01/08 18:02:16 31MFJ600 0205
(1) key number plate
(1)
197
If You Lose Your Key
Taking Care of the Unexpected
Be sure to record your key number in theQuick Reference section at the rear of themanual. You’ll need this number to have aduplicate key made.
A lost key won’t be a problem if you takepreventative action. Store one duplicatekey in a safe place at home and carry asecond duplicate in your wallet.
If you lose your key and aren’t carrying aduplicate, either get your spare or haveone made. If you don’t know your keynumber, call the dealer where youpurchased your Honda motorcycle. Theymay have it listed in their records. If they
don’t, transport your motorcycle to themor the nearest Honda dealer. The dealerwill probably have to remove the ignitionswitch assembly to find the key number sothey can make a key for you.
You should receive a key number plate( ) with your keys. Store this plate in asafe place.1
07/01/08 18:02:25 31MFJ600 0206
198
If Your Battery Is Low (or Dead)
Taking Care of the Unexpected
Jump starting is not recommended,especially if you use an automobile battery.The greater amperage of an automobilebattery when the car engine is running candamage your motorcycle’s electricalsystem.
Bump starting is also not recommended.
If you can’t charge the battery or itappears unable to hold a charge, contactyour Honda dealer.
07/01/08 18:02:30 31MFJ600 0207
199
Technical Information
Technical Information
This section contains dimensions,capacities, and other technical data, plusinformation on government requirementsand how to break-in your motorcycle.
.........................Vehicle Identification ......................................Specifications .
...........................Break-in Guidelines ..................Emission Control Systems .
............................Catalytic Converter ................................Oxygenated Fuels .
200203210211217218
07/01/08 18:02:39 31MFJ600 0208
(1) VIN
LEFT SIDE (1)
200
Serial Numbers
Vehicle Identification
Technical Information
The VIN and engine serial number arerequired when you register yourmotorcycle. They may also be requiredwhen ordering replacement parts. Youmay record these numbers in the QuickReference section at the rear of thismanual.
The VIN (vehicle identification number)is stamped on the right side of the steeringhead and also appears on the SafetyCertification Label attached to the leftside of the frame.
07/01/08 18:02:46 31MFJ600 0209
RIGHT SIDE
(3) engine number
(2)
(3)LEFT SIDE
(2) VIN
201
Vehicle Identification
Technical Information
The engine number ( ) is stamped on thetop of the crankcase.
3
07/01/08 18:02:53 31MFJ600 0210
(1) color label
UNDER REAR SEAT(1)
202
Color Label & Code
Vehicle Identification
Technical Information
The color code is helpful when orderingreplacement parts. You may record thecolor and code in the Quick Referencesection at the rear of this manual.
The color label ( ) is attached on the rearfender under the rear seat. Remove therear seat (page ) to check the label.87
1
07/01/08 18:03:01 31MFJ600 0211
79.1 in (2,010 mm)27.0 in (685 mm)43.5 in (1,105 mm)53.9 in (1,370 mm)5.3 in (135 mm)
overall lengthoverall widthoverall heightwheelbaseground clearance
Dimensions
203
Specifications
Technical Information
07/01/08 18:03:10 31MFJ600 0212
SAE 80 or 90 gear oil
3.33 US qt (3.15 )
premium unleaded gasoline, pump octane number of 91or higher
API Service Classification SG or higher except oilslabeled as energy conserving on the circular API servicelabel, SAE 10W-30, JASO T 903 standard MA,Pro Honda GN4 4-stroke oil (USA & Canada) or Honda 4-stroke oil (Canada only), or an equivalent motorcycle oil
2.9 US qt (2.7 )3.7 US qt (3.5 )
4.76 US gal (18.0 )after disassembly:after draining:
3.0 US qt (2.8 )after draining & oil filter change:
fuel recommendation
drive chain lubricantPro Honda HP Coolant or an equivalent high quality ethyleneglycol antifreeze containing corrosion protection inhibitorsspecifically recommended for use in aluminum engines
cooling system,recommendation
cooling system,capacity
engine oilrecommendation
engine oil capacityfuel tank capacity
Fuel & Lubricants
204
Specifications
Technical Information
07/01/08 18:03:25 31MFJ600 0213
× ×
±
- -
operator, one passenger
12.2 : 12.64 1.67 in (67.0 42.5 mm)36.5 cu-in (599 cm )
rider, passenger, all cargo and accessories
366 lbs (166 kg)
IMR9C-9HES (NGK)
375 lbs (170 kg)
VUH27D (DENSO)
1,400 100 rpm
or
no adjustment
0.011 in (0.28 mm)0.008 in (0.20 mm)
0.031 0.035 in (0.80 0.90 mm)
USA :Canada :
passengercapacitymaximum weightcapacity
spark plug(standard)
compression ratiobore & strokedisplacement
idle speed
valve clearance(cold)
intakeexhaust
spark plug gap
Capacities
Engine Specifications
205
Specifications
Technical Information
07/01/08 18:03:41 31MFJ600 0214
2.1112.7502.0001.6671.4441.3041.2082.625
42 teethchainDID525HV RK525ROZ6
16 teeth
or
drive (front) sprocket:driven (rear wheel) sprocket:
primary reductiongear ratio, 1st2nd3rd4th5th6thfinal reductionstandardsprocket sizesfinal drive
Power Transmission
206
Specifications
Technical Information
07/01/08 18:03:57 31MFJ600 0215
23°55’3.9 in (98 mm)120/70ZR17M/C (58W)
42 psi (290 kPa , 2.90 kgf/cm )
36 psi (250 kPa , 2.50 kgf/cm )
180/55ZR17M/C (73W)
radial-ply, tubeless
DUNLOP Qualifier PTGBRIDGESTONE BT015F RADIAL E
DUNLOP Qualifier PTGBRIDGESTONE BT015R RADIAL E
castertrailtire size, front
tire pressure, rear(cold)
tire pressure, front(cold)
tire size, rear
tire type
Chassis & Suspension
207
Specifications
Technical Information
07/01/08 18:04:09 31MFJ600 0216
-
-
--
12V 8.6 Ah0.342 kW/5,000 rpm
12V 55WLED12V 23/8W12V 23WLEDLED
30A10A, 20A
(2 bulbs)
(rear)(front)
batterygenerator
headlightbrake/tail lightturn signal lights
position lightlicense light
mainother fuses
Electrical
Lights
Fuses
208
Specifications
Technical Information
07/01/08 18:04:23 31MFJ600 0217
22 lbf·ft (30 N·m , 3.1 kgf·m)19 lbf·ft (26 N·m , 2.7 kgf·m)44 lbf·ft (59 N·m , 6.0 kgf·m)
33 lbf·ft (45 N·m , 4.6 kgf·m)
16 lbf·ft (22 N·m , 2.2 kgf·m)
83 lbf·ft (113 N·m , 11.5 kgf·m)
engine oil filterfront wheel axleboltfront wheel caliperfixing boltsfront wheel axlepinch boltsrear wheel axle nut
engine oil drain boltTorque Specifications
209
Specifications
Technical Information
07/01/08 18:04:34 31MFJ600 0218
210
Break-in Guidelines
Technical Information
Help assure your motorcycle’s futurereliability and performance by payingextra attention to how you ride during thefirst 300 miles (500 km).
During this period, avoid full-throttlestarts and rapid acceleration.
07/01/08 18:04:38 31MFJ600 0219
(2) (1)
(2) vehicle emission control informationlabel (Canada only)
(1) vehicle emission control informationlabel
211
Exhaust Emission Requirements
Emission Control Systems
Technical Information
The U.S. Environmental ProtectionAgency (EPA), the California AirResources Board (CARB), andEnvironment Canada require that yourmotorcycle comply with applicableexhaust emissions standards during itsuseful life, when operated and maintainedaccording to the instructions provided.
The Vehicle Emission ControlInformation label ( ) ( ) is attached onthe rear fender under the rear seat.
1 2
07/01/08 18:04:44 31MFJ600 0220
212
Emission Control Systems
Technical Information
Noise Emission Requirements
Warranty Compliance
Source of Exhaust EmissionsThe EPA also requires that motorcyclesbuilt after January 1, 1983 comply withapplicable noise emission standards forone year or 3,730 miles (6,000 km) afterthe time of sale to the ultimate purchaser,when operated and maintained accordingto the instructions provided. (USA only)
Compliance with the terms of theDistributor’s Warranties for HondaMotorcycle Emission Control Systems isnecessary in order to keep the emissionssystem warranty in effect. (USA only)
The combustion process produces carbonmonoxide (CO), oxides of nitrogen (NOx)and hydrocarbons (HC). Control ofhydrocarbons and oxides of nitrogen isvery important because, under certainconditions, they react to formphotochemical smog when subjected tosunlight. Carbon monoxide does not reactin the same way, but it is toxic.
Honda Motor Co., Ltd. utilizes varioussystems to reduce carbon monoxide,oxides of nitrogen and hydrocarbons.
07/01/08 18:04:50 31MFJ600 0221
213
Emission Control Systems
Technical Information
Ignition Timing Control System
PGM-FI SystemExhaust Emission Control System
The system constantly adjusts the ignitiontiming, reducing the amount of HC, COand NOx produced.
The PGM-FI system uses dual sequentialfuel injection. It has four subsystems: AirIntake, Engine Control, Fuel Control, andExhaust Control.The Engine Control Module (ECM) usesvarious sensors to determine how much airis going into the engine. It then controlshow much fuel to inject under alloperating conditions.
The exhaust emission control systemincludes an oxidation catalyst, a secondaryair supply system, and a PGM-FI system.
No adjustment to these systems should bemade although periodic inspection of allcomponents is recommended.
07/01/08 18:04:56 31MFJ600 0222
214
Secondary Air Injection System Evaporative Emission Control System(California only)
Technical Information
Emission Control Systems
Oxidation Catalytic Converter
The secondary air injection systemintroduces filtered air into the exhaustgases in the exhaust port. The secondaryair injection system helps improveemission performance.
The oxidation catalytic converter is in theexhaust system. Through chemicalreactions, they convert HC and CO in theengine’s exhaust to carbon dioxide (CO )and water vapor.
This motorcycle complies with therequirements of the California AirResources Board (CARB) evaporativeemission regulations. Fuel vapor from thefuel tank is directed into the charcoalcanister and air cleaner where it isadsorbed and stored while the engine isstopped. When the engine is running andthe purge control solenoid valve is open,fuel vapor in the charcoal canister and aircleaner is drawn into the engine throughthe throttle body.
2
07/01/08 18:05:02 31MFJ600 0223
215
Problems That May Affect MotorcycleExhaust Emissions
Crankcase Emission Control System
Emission Control Systems
Technical Information
If you are aware of any of the followingsymptoms, have the vehicle inspected andrepaired by your authorized Hondamotorcycle dealer.
Symptoms:Hard starting or stalling after startingRough idleMisfiring or backfiring duringaccelerationAfter-burning (backfiring)Poor performance (driveability) andpoor fuel economy
The engine is equipped with a closedcrankcase system to prevent dischargingcrankcase emissions into the atmosphere.Blow-by gas is returned to the combustionchamber through the air cleaner and theintake manifold.
1.2.3.
4.5.
07/01/08 18:05:08 31MFJ600 0224
216
Noise Emission Control System
Emission Control Systems
Technical Information
Removal of, or puncturing the muffler,baffles, header pipes or any othercomponent which conducts exhaustgases.Removal of, or puncturing of any partof the intake system.Lack of proper maintenance.Replacing any moving parts of thevehicle, or parts of the exhaust or intakesystem, with parts other than thosespecified by the manufacturer.
AMONG THOSE ACTS PRESUMEDTO CONSTITUTE TAMPERING ARETHE FOLLOWING ACTS:
TAMPERING WITH THE NOISECONTROL SYSTEM IS PROHIBITED:U. S. federal law prohibits, or Canadianprovincial laws may prohibit the followingacts or the causing thereof: ( ) Theremoval or rendering inoperative by anyperson, other than for purposes ofmaintenance, repair or replacement, of anydevice or element of design incorporatedinto any new vehicle for the purpose ofnoise control prior to its sale or delivery tothe ultimate purchaser or while it is in use;or ( ) the use of the vehicle after suchdevice or element of design has beenremoved or rendered inoperative by anyperson.
1.
2.
3.4.
1
2
07/01/08 18:05:14 31MFJ600 0225
217Technical Information
Catalytic Converter
This motorcycle is equipped with anoxidation catalytic converter.The catalytic converter contains preciousmetals that serve as catalysts, promotingchemical reactions to convert the exhaustgasses without affecting the metals.
The catalytic converter acts on HC andCO. A replacement unit must be anoriginal Honda part or its equivalent.
The catalytic converter must operate at ahigh temperature for the chemicalreactions to take place. It can set fire toany combustible materials that come nearit. Park your motorcycle away from highgrasses, dry leaves, or other flammables.
A defective catalytic converter contributesto air pollution, and can impair yourengine’s performance. Follow theseguidelines to protect your motorcycle’scatalytic converter.
Always use unleaded gasoline. Even asmall amount of leaded gasoline cancontaminate the catalyst metals, makingthe catalytic converter ineffective.
Keep the engine tuned-up.
An engine that is misfiring mayoverheat the catalytic converter, causingdamage to the converter or motorcycle.Have your motorcycle diagnosed andrepaired if it is misfiring, backfiring,stalling or otherwise not runningproperly.
07/01/08 18:05:19 31MFJ600 0226
218
Oxygenated Fuels
Technical Information
Some conventional gasolines are beingblended with alcohol or an ethercompound. These gasolines arecollectively referred to as oxygenatedfuels. To meet clean air standards, someareas of the United States and Canada useoxygenated fuels to help reduce emissions.If you use an oxygenated fuel, be sure it isunleaded and meets the minimum octanerating requirement.Before using an oxygenated fuel, try toconfirm the fuel’s contents. Some states/provinces require this information to beposted on the pump.
The following are the EPA-approvedpercentages of oxygenates:
ETHANOL (ethyl or grain alcohol) 10%by Volume
You may use gasoline containing up to10% ethanol by volume. Gasolinecontaining ethanol may be marketedunder the name ‘‘Gasohol’’.
MTBE (Methyl Tertiary Butyl Ether) 15%by Volume
You may use gasoline containing up to15% MTBE by volume.
07/01/08 18:05:28 31MFJ600 0227
219
Oxygenated Fuels
Technical Information
Oxygenated f uels can damage paint andplastic. Damage caused by spilled f uel isnot covered by warranty.
Fuel system damage or performanceproblems resulting from the use of anoxygenated fuel containing more than thepercentages of oxygenates mentionedabove are not covered under warranty.
Oxygenated fuels can damage paint andplastic. Be careful not to spill fuel whenfilling the fuel tank. Wipe up any spillsimmediately.
If you notice any undesirable operatingsymptoms, try another service station orswitch to another brand of gasoline.
METHANOL (methyl or wood alcohol)5% by Volume
You may use gasoline containingmethanol containing up to 5% methanolby volume as long as it also containscosolvents and corrosion inhibitors toprotect the fuel system. Gasolinecontaining more than 5% methanol byvolume may cause starting and/orperformance problems. It may alsodamage metal, rubber, and plastic partsof your fuel system.
07/01/08 18:05:35 31MFJ600 0228
221
Consumer Information
Consumer Information
This section contains information on yourwarranty and how to get an official HondaService Manual.
...........................Authorized Manuals .............................Warranty Coverage .
................................Warranty Service ................................Contacting Honda .
............................Your Honda Dealer .The Honda Rider’s Club
.........................................(USA only) .Reporting Safety Defects
.........................................(USA only) .
222225226227228
229
231
07/01/08 18:05:48 31MFJ600 0230
*
*
$60.00
$48.00
$16.00
61MFJ00
61CM002
31MFJ600
2007 CBR600RR Service Manual
Common Service Manual
2007 CBR600RR Owner’s Manual
Publication Item No. Description Price Each
Prices are subject to change without notice and without incurr ing obligation.
222
Authorized Manuals
Consumer Information
The Service Manual used by your authorized Honda dealer is available from Helm, Inc.(USA only, Canada: See your Honda dealer to order authorized manuals.)
Also available but not necessary to service your model is the Honda Common ServiceManual which explains theory of operation and basic service information for various systemscommon to all Honda motorcycles, motor scooters and ATVs.
These Honda manuals are written for the professional technician, but most mechanically-capable owners should find them easy to use if they have the proper tools and observe propersafety standards. Special Honda tools are necessary for some procedures.
07/01/08 18:05:58 31MFJ600 0231
*
*
- -
Prices are subject to change without notice and without incurring
obligation.
Orders are mailed within 10 days. Please allow adequate time for
delivery.
Item DescriptionPublication
Item No.
Total
Price
Price
Each
Qty.
Handling Charge
Grand Total
$5.00
Sub Total
Purchaser’s Sales Tax
Mich. Add 6 %
Calif. Add 8.25 %
223
Order On-Line: www.helminc.com
Order Toll Free: 1-888-CYCLE93
OR
Consumer Information
(NOTE: For Credit Card Orders Only)
(1-888-292-5393)
Monday Friday 8:00 AM 6:00 PM EST
By completing this form you can order the materials desired. You can pay by check ormoney order, or charge to your credit card. Mail to Helm, Inc. at the address shown on theback of this order form (USA only).
Canada: See your Honda dealer to order authorized manuals.
07/01/08 18:06:10 31MFJ600 0232
-
NOTE: Dealers and Companies please provide dealer or company name, and also the name of the person to whose attention theshipment should be sent.
Customer Name Attention
Zip CodeStateCity
Daytime Telephone Number
Check here if your billing address is different from theshipping address shown above.
Check or money order enclosed payable to Helm Inc.U.S. funds only. Do not send cash.
MasterCard
VISA
Discover
Account Number
Date
These Publications cannot be returned for credit without receiving advance authorization within 14 days of delivery. On returns, a restocking fee maybe applied against the original order.
Expiration: Mo. Yr.
Customer Signature
Apartment NumberStreet Address - No P. O. Box Number
( )
P.O. BOX 07280, DETROIT, MICHIGAN 48207HELM
SHIP
TO
PAYMENT
224 Consumer Information
07/01/08 18:06:28 31MFJ600 0233
225
Warranty Coverage
Consumer Information
Your new Honda is covered by thesewarranties:
Motorcycle Limited WarrantyExhaust Emission WarrantyNoise Control Warranty
There are responsibilities, restrictions, andexclusions which apply to these warranties.Please read the Warranties Booklet givento you by your Honda dealer at the time ofpurchase. Be sure to keep your Hondaowner’s card with your WarrantiesBooklet (USA only).
It is important to realize that yourwarranty applies to defects in material orworkmanship of your Honda. Yourwarranty coverage does not apply tonormal wear or deterioration associatedwith using the motorcycle.
Your warranty coverage will not bevoided if you choose to perform your ownmaintenance. However, you should havethe proper tools and service informationand be mechanically qualified. Failuresthat occur due directly to impropermaintenance are not covered.
Almost all of your warranty coverage canbe extended through the Honda ProtectionPlan (USA only). For more information,see your Honda dealer.
07/01/08 18:06:37 31MFJ600 0234
226
Warranty Service
Consumer Information
Please remember that recommendedmaintenance interval servicing is notincluded in your warranty coverage.Additionally, your warranty does notapply to the normal wear of items (such asbrakes, tires, etc.).
If you believe you have a problem withyour motorcycle, call the servicedepartment of your Honda dealer. Makean appointment for an inspection anddiagnosis. Remember, as the owner of themotorcycle, you will be asked to authorizethat inspection. Your dealer will give youthe results of the inspection. If theproblem is covered under warranty, yourdealer will perform the warranty repairsfor you.
If you have questions about warrantycoverage or the nature of the repair, it isbest to talk to the service manager of yourHonda dealer.
Sometimes, in spite of the best intentionsof all concerned, a misunderstanding mayoccur. If you aren’t satisfied with yourdealer’s handling of the situation, wesuggest you discuss your problem with theappropriate member of the dealership’smanagement team. If the problem hasalready been reviewed with the ServiceManager, Parts Manager, Sales Manager,etc., contact the Owner of the dealershipor their designated representative.
07/01/08 18:06:44 31MFJ600 0235
227Consumer Information
Contacting Honda
Your owner’s manual was written to covermost of the questions you might ask aboutyour Honda. Any questions not answeredin the owner’s manual can be answered byyour Honda dealer. If your dealer doesn’thave the answer right away, they will getit for you.
Motorcycle Division, American HondaMotor Co., Inc., P.O. Box 2200, Torrance,CA 90509-2200, mailstop: 100-4C-7B,telephone: (866) 784-1870.
Canada: Refer to the Warranties Bookletthat was supplied with your vehicle.
Please include the following informationin your letter:
name, address, and telephone numberproduct model, year, and VINdate of purchasedealer name and address
If you have a difference of opinion withyour dealer, please remember that eachdealership is independently owned andoperated. That’s why it’s important towork to resolve any differences at thedealership level.
If you wish to comment on yourexperiences with your Honda or with yourdealer, please send your comments to thefollowing address (USA only):
We will likely ask your Honda dealer torespond, or possibly acknowledge yourcomments directly.
07/01/08 18:06:53 31MFJ600 0236
228 Consumer Information
Your Honda Dealer
Once you purchase your new Honda, getfamiliar with the organization of yourHonda dealer so you can utilize the fullrange of services available.
The service department is there to performregular maintenance and unexpectedrepairs. It has the latest available serviceinformation from Honda. The servicedepartment will also handle warrantyinspections and repairs.
The parts department offers GenuineHonda parts, Pro Honda products,Hondaline accessories (USA only), andHonda accessories and products (Canadaonly). The same quality that went intoyour Honda can be found in GenuineHonda replacement parts. You’ll also findcomparable quality in the accessories and
products available from the partsdepartment.
The sales department offers the HondaProtection Plan to extend almost all ofyour warranty coverage (USA only).Your Honda dealer can inform you aboutcompetition and other riding events inyour area. You’ll also find that your dealeris a source of information about AmericanHonda’s Rider Education Centers and theHonda Rider’s Club of America (USAonly).
We’re sure you’ll be as pleased with theservice your Honda dealer continues toprovide after the sale as you are with thequality and dependability of your Honda.
07/01/08 18:07:01 31MFJ600 0237
229Consumer Information
The Honda Rider’s Club (USA only)
For street-legalmotorcycles and scooters only.
Honda Red Rider
One of the best ways to get the mostenjoyment from owning and riding yourHonda is through the Honda Rider’s Clubof America. Your purchase of a newmotorcycle, scooter, ATV or PWC from aparticipating U.S. Honda dealer entitlesyou to a complimentary one-yearmembership in the Club. There arehundreds of HRCA Chapter-sponsoringdealers across the USA with events andactivities almost every weekend.Membership benefits include:
24-hour, toll-free roadside assistancefor your new Honda (includes roadsideassistance for your transport vehicle [upto one ton] as long as your Honda isaboard or in tow).
Reimbursement (up to $75) forsuccessful completion of a MotorcycleSafety Foundation training course.Separate, complimentary training fromthe Specialty Vehicle Institute ofAmerica for purchasers of new ATVs.
Discounts from HRCA partners forexperienced rider courses.Discounted vehicle insurance from theHRCA’s insurance partner.Racing contingency programs andassistance at selected dual-sport, off-road and motocross events for off-roadmotorcycles and selected ATVs.
One full year ofmagazine (six issues).
An exclusive HRCA website completewith access to the official Honda
Common Service Manual, contests,insider information and more.
07/01/08 18:07:11 31MFJ600 0238
230
The Honda Rider’s Club (USA only)
Consumer Information
If you purchased an of f -road motorcycle,ATV or PWC, your benef its do notinclude roadside assistance or tripinterruption protection.
Contact your Honda dealer for moreinformation or call: 1-800-847-4722 or logon to www.hrca.honda.com.
07/01/08 18:07:16 31MFJ600 0239
231
Reporting Safety Defects (USA only)
Consumer Information
http://www.saf ercar.gov
http://www.saf ercar.gov.
If you believe that your vehicle has adefect which could cause a crash orcould cause injury or death, you shouldimmediately inform the NationalHighway Traffic Safety Administration(NHTSA) in addition to notifyingAmerican Honda Motor Co., Inc.
If NHTSA receives similar complaints,it may open an investigation, and if itfinds that a safety defect exists in agroup of vehicles, it may order a recalland remedy campaign. However,NHTSA cannot become involved inindividual problems between you, yourdealer, or American Honda Motor Co.,Inc.
To contact NHTSA, you may call theVehicle Safety Hotline toll-free at1-888-327-4236(TTY: 1-800-424-9153); go to
; or write to:Administrator, NHTSA, 400 SeventhStreet, SW., Washington, DC 20590.You can also obtain other informationabout motor vehicle safety from
07/01/08 18:07:22 31MFJ600 0240
232
Table of Contents
Table of Contents
..................MOTORCYCLE SAFETY . 1
.......INSTRUMENTS & CONTROLS . 9
The following presents the contents ofeach section of your owner’s manual.
................Important Safety Information ..................Accessories & Modifications .
..........................................Safety Labels .
...........Operation Component Locations ................Gauges, Indicators & Displays .
..........................................Fuel Gauge ........................Multi-function Display .
...............Coolant Temperature Meter ........................................Speedometer .
...............Odometer/Tripmeter A & B .Changing the Speed, Mileage and
...............................Temperature Unit .......................................Digital Clock .
................................Controls & Features ....................................Ignition Switch .
.........................................Start Button .............................Engine Stop Switch .
.................Headlight Dimmer Switch ..............................Turn Signal Switch .
........................................Horn Button .....................................RESET Button .
.........................................SEL Button .HESD (Honda Electronic Steering
..............................................Damper) .
257
11142224252728
2931
343435353636373737
38
07/01/08 18:07:43 31MFJ600 0241
233
Table of Contents
Table of Contents
...............................BEFORE RIDING . 39 .....BASIC OPERATION & RIDING . 49........................Are You Ready to Ride? .
......Is Your Motorcycle Ready to Ride? .
......................Load Limits & Guidelines .
..............................Protective Apparel .....................................Rider Training .
.............................Pre-ride Inspection .
...............................................Loading .........................................Load Limits .
............................Loading Guidelines .
.........................Safe Riding Precautions ..............Starting & Stopping the Engine .
.........................................Shifting Gears ....................................................Braking .....................................................Parking .
..........Riding with a Passenger or Cargo .
..........................................Preparation ...............................Starting Procedure .
..................................Flooded Engine .Bank Angle Sensor Ignition Cut-off
................................................System ......................How to Stop the Engine .
........................Theft-Prevention Tips .
404042434346464747
5051515253
53545557596264
07/01/08 18:08:03 31MFJ600 0242
234
Table of Contents
Table of Contents
...........SERVICING YOUR HONDA . 65 Service ProceduresBef ore You Service Your Honda
Service Preparations
Fluids & Filters
Engine
............The Importance of Maintenance .................................Maintenance Safety .
.............................Periodic Maintenance ............................Maintenance Schedule .
...............................Maintenance Record .
.............Important Safety Precautions .
......Maintenance Component Locations ....................................................Tool Kit .
........................Owner’s Manual Storage ...........................................Seat Removal .
.........................Lower Fairing Removal .........................Middle Fairing Removal .
.........................................................Fuel ..................................Engine Oil & Filter .
................................................Coolant .
...............................................Throttle ......................................Clutch System .
.........................................Spark Plugs .
Chassis..........................................Suspension .
.................................................Brakes .....................................................Tires .
...........................................Side Stand .........................................Drive Chain .
686970727479
818485868890
9194
104
108110114
120129135142143
07/01/08 18:08:28 31MFJ600 0243
235
Table of Contents
Table of Contents
TAKING CARE OF THE.................................UNEXPECTED . 169
.....................................................TIPS . 163
.............................General Guidelines ..If Your Engine Quits or Won’t Start .
......................If You Have a Flat Tire ...................If Your Engine Overheats .
If the Low Oil Pressure Indicator..................................................Lights .
...................................If a Fuse Blows ........................................If You Crash .
.......................If You Lose Your Key .......If Your Battery Is Low (or Dead) .
Electrical................................................Battery .
................................Appearance Care .
...........................Storing Your Honda ...........Transporting Your Motorcycle .
.....................You & the Environment .
150
155
164167168
170171176189
191192196197198
07/01/08 18:08:45 31MFJ600 0244
236
Table of Contents
Table of Contents
.....TECHNICAL INFORMATION . 199 ......CONSUMER INFORMATION . 221
.................TABLE OF CONTENTS . 232
................................................INDEX . 238
QUICK REFERENCE
.........................Vehicle Identification ......................................Specifications .
...........................Break-in Guidelines ..................Emission Control Systems .
............................Catalytic Converter ................................Oxygenated Fuels .
...............................Contacting Honda .................................Warranty Service .
............................Warranty Coverage .
............................Your Honda Dealer .The Honda Rider’s Club
.........................................(USA only) .Reporting Safety Defects
.........................................(USA only) .
...........................Authorized Manuals .200203210211217218
222225226227228
229
231
07/01/08 18:09:02 31MFJ600 0245
238
Index
Index
A
C
B
...............................................accessories . 5..................................air pressure, tires . 135
...............American Honda, contacting . 227.................................apparel, protective . 40
...................................appearance care . 155..............................authorized manuals . 222
..................................bank angle sensor . 53..................................................battery . 150
brakes,..................................................fluid . 130
.....................front lever adjustment . 129...........................................pad wear . 133
...................................................braking . 57..............................break-in guidelines . 210
button,............................SEL . 14, 21, 28, 31, 37
.................RESET . 14, 21, 28, 29, 31, 37
.........................................capacity, fuel . 92..................................care, appearance . 155
...............................catalytic converter . 217..........................................chain, drive . 143
...................cleaning, appearance care . 155....................................clock, digital . 19, 31.......................................clutch system . 110
............................................color label . 202..............compartment, owner’s manual . 85
.........................consumer information . 221................................controls & features . 34
..................................................coolant . 104.......coolant temperature meter . 19, 25, 189
..................................customer service . 227
07/01/08 18:09:12 31MFJ600 0247
239
Index
Index
D
E
F
(cont’d)
.....................emission control systems . 211engine,
...............................................flooded . 53................................low oil pressure . 191
.............................................number . 201
.......................................................oil . 94..........................................overheats . 189
...............................................pinging . 91
...............................................starting . 51.........................................stop switch . 35
..............................................stopping . 54........................................won’t start . 171.........................................environment . 168
damping, suspension,.................................................front . 123
...................................................rear . 127......................................defects, safety . 231
.....................................digital clock . 19, 31display,
..................................................check . 17....................................multi-function . 24
...........................................drive chain . 143 fairing removal,............................................lower . 88, 89
................................................middle . 90..................................................flat tire . 176
.......................................flooded engine . 53
07/01/08 18:09:19 31MFJ600 0248
240
Index
Index
G
H
I
..........................identification, vehicle . 200ignition cut-off system,
..........................................bank angle . 53...................................side stand . 51, 142
.......................................ignition switch . 34................................................indicators . 14
................................inspection, pre-ride . 43
fuel,..................................................gauge . 22
.......................................oxygenated . 218................................recommendation . 91
......................................tank capacity . 92.....................................................fuses . 192
.......................headlight dimmer switch . 36.........................................helmet holder . 61
HESD (Honda Electric Steering.................................................Damper) . 38
high coolant temperature.............................indicator . 14, 20, 26, 189
.........................high beam indicator . 14, 21Honda,
........................................contacting . 227.....................................Rider’s Club . 229
................................................dealer . 228.................................service manual . 222
.............................................horn button . 37............................gap, spark plug . 118, 205
.................................................gasohol . 218..................................................gasoline . 91
................gauges, indicators & displays . 14
07/01/08 18:09:27 31MFJ600 0249
241
Index
Index
M
N
L
K
................................................key, lost . 197...................................................kit, tool . 84
............................................labels, safety . 7.............................................lamp check . 15...........................................limit, weight . 47
..............................................load limits . 47..................................loading guidelines . 47
..........................................lock, steering . 60......................lower fairing removal . 88, 89
.....................................numbers, serial . 200
maintenance,..........................component locations . 81
.........................................importance . 68..............................................periodic . 72
.................................................record . 79..................................................safety . 69
.............................................schedule . 74....................................manual, service . 222
..........................maximum weight limit . 47............................................meter check . 16
...........................................modifications . 6
07/01/08 18:09:34 31MFJ600 0250
242
Index
Index
R
O
P
removal,................................lower fairing . 88, 89
....................................middle fairing . 90.....................................................seat . 86
.......................reporting safety defects . 231.........RESET button . 14, 21, 28, 29, 31, 37
......................................rider training . 3, 42............................Rider’s Club, Honda . 229
..........................................odometer . 19, 28oil,
.................................................engine . 94.........................low pressure . 14, 21, 191
.............operation component locations . 11...................................overheat, engine . 189
.........................owner’s manual storage . 85..................................oxygenated fuels . 218
...................................................parking . 59......................................pinging, engine . 91
..........................................plugs, spark . 114pre-load, suspension,
.................................................front . 122...................................................rear . 126
.................................pre-ride inspection . 43..........................problems, unexpected . 169
..................................protective apparel . 40
07/01/08 18:09:41 31MFJ600 0251
243
Index
Index
S
(cont’d)
riding,...................................basic operation . 49
..............................................clothing . 40.........................................precautions . 50
....................................................safety . 2..............................safety precautions . 50
.....................with passenger or cargo . 64
safety,........................important precautions . 70
....................................................labels . 7..............................reporting defects . 231..............................riding precautions . 50
...........................schedule, maintenance . 74...........................................seat removal . 86
.....................SEL button . 14, 21, 28, 31, 37.................................sensor, bank angle . 53
......................................serial numbers . 200
service,...........................................customer . 227............................................manuals . 222...........................................warranty . 226
.........................................shifting gears . 55.............................................side stand . 142
.side stand ignition cut-off system . 51, 142............................................spark knock . 91
...........................................spark plugs . 114.......................................specifications . 203
.....................................speedometer . 19, 27............................................stand, side . 142.............................................start button . 35
starting,.................................................engine . 51
................................troubleshooting . 171...........................................steering lock . 60
................................stop switch, engine . 35
07/01/08 18:09:47 31MFJ600 0252
244
Index
Index
T......................................stopping engine . 54
storage,.......................................motorcycle . 164
.................................owner’s manual . 85suspension,
............front suspension adjustment . 121.....front suspension spring pre-load . 122
...............front suspension damping . 123.............rear suspension adjustment . 125
.......rear suspension spring pre-load . 126.................rear suspension damping . 127
switch,.........................................engine stop . 35
...............................headlight dimmer . 36...............................................ignition . 34
..........................................turn signal . 36
.......................................tachometer . 14, 18......temperature meter, coolant . 18, 25, 189
...............................theft prevention tips . 62..................................................throttle . 108
tires,.......................................air pressure . 135
....................................................flat . 176..........................................replacing . 139
....................................................tool kit . 84.....................................training, rider . 3, 42
..............transporting your motorcycle . 167...........................................tripmeter . 19, 28
.............................trouble, unexpected . 169......................troubleshooting, starting . 171
.......................turn signal indicators . 14, 18
07/01/08 18:09:53 31MFJ600 0253
245
Index
Index
W
V
..vehicle identification no. (VIN) . 200, 201
warranty,...........................................coverage . 225...........................................extended . 225
..............................................service . 226....................washing your motorcycle . 157
............................................weight limit . 47wheels,
...................................front removal . 179.....................................rear removal . 185
07/01/08 18:09:58 31MFJ600 0254
Quick Reference
Quick Reference
How To Avoid Costly RepairsThe following is a brief, but importantcollection of information you need toknow about your Honda. You’ll also findspace to record important notes. The engine of your Honda can be the most
expensive component to repair. Propermaintenance, especially the use of therecommended fluids and filters, preventspremature wear and damage.
Frequent causes of costly repairs are:Engine oil: insufficient quantity,improper oil.Air cleaner: dirty, leaking because ofimproper installation (poor seal).
Record important information on thefollowing page:
07/01/08 18:10:09 31MFJ600 0256
Quick Reference
Quick Reference
VINEngine No.Ignition Key No.Color LabelOwner’s Name
AddressCity/StatePhone
Dealer’s NameAddressCity/StatePhoneService Mgr.
07/01/08 18:10:13 31MFJ600 0257
4.76 US gal (18.0 )
366 lbs (166 kg)375 lbs (170 kg) Canada
Quick Reference
Quick Reference
ScheduledMaintenancePre-rideInspectionPeriodicChecksFuel/Capacity
Initial: 600 miles (1,000 km)Regular: every 4,000 miles (6,400 km)Check the following items each time before you ride (page ): tires &wheels, chain, leaks, loose parts, lights, throttle, brakes, indicators.
Engine Oil
Check the following items monthly (page ): tires & wheels, fluids,lights, freeplay, drive chain, fuses, nuts & bolts.premium unleaded gasoline, pump octane number 91 or higher
API Service Classification SG or higher except oils labeled as energyconserving on the circular API service label,SAE 10W-30, JASO T 903 standard MA,Pro Honda GN4 4-stroke oil or equivalent
MaximumWeightCapacity rider, passenger, all cargo and accessories
43
73
07/01/08 18:10:27 31MFJ600 0258
DUNLOP Qualifier PTGBRIDGESTONE BT015F RADIAL E
120/70ZR17M/C (58W)
180/55ZR17M/C (73W)DUNLOP Qualifier PTGBRIDGESTONE BT015R RADIAL E
36 psi (250 kPa , 2.50 kgf/cm )42 psi (290 kPa , 2.90 kgf/cm )
radial-ply, tubeless
IMR9C-9HES (NGK) VUH27D (DENSO)
30A10A, 20A
Quick Reference
Quick Reference
Tires
Tire Pressure(cold)Spark PlugsCoolant ethylene glycol antifreeze (silicate-free) for aluminum engines in 50/50
solution with Pro Honda HP Coolant or an equivalent distilled waterFuses
Front:
Rear:
Front:Rear:standard:
or
or
Type:
main :other:
or
07/01/08 18:10:40 31MFJ600 0259