honeywell sensor presion 15pdaa5

8/11/2019 Honeywell Sensor Presion 15pdaa5

http://slidepdf.com/reader/full/honeywell-sensor-presion-15pdaa5 1/8

ISSUE 5

50044172

Sensing and Control

GENERAL INFORMATION

TruStability™ High Accuracy Silicon Ceramic (HSC) Series

and Standard Accuracy Silicon Ceramic (SSC) Series s are

piezoresistive silicon pressure sensors offering a ratiometric

analog output for reading pressure over the specified full scale

pressure span and temperature range. They are available in

standard pressure ranges from 1 psi to 150 psi (60 mbar to

10 bar) and are intended for use with non-corrosive, non-ionic

gases, such as air and other dry gases. The liquid media

option extends the performance of these sensors to con-

corrosive, non-ionic liquids.

LIQUID MEDIA OPTIONCAUTIONPRODUCT DAMAGE

Ensure liquid media is applied to Port 1 only; Port 2 is not

compatible with liquids.

Ensure liquid media contains no particulates. All

TruStability ®

sensors are dead-ended devices.

Particulates can accumulate inside the sensor, causing

damage or affecting sensor output.

Recommend that the sensor be positioned with Port 1

facing downwards; any particulates in the system are less

likely to enter and settle within the pressure sensor if it is

in this position.

Ensure liquid media does not create a residue when dried;

build-up inside the sensor may affect sensor output.

Rinsing of a dead-ended sensor is difficult and has limited

effectiveness for removing residue.

Ensure liquid media are compatible with wetted materials.

Non-compatible liquid media will degrade sensor

performance and may lead to sensor failure.

Failure to comply with these instructions may result in

product damage.

SOLDERING

See soldering times and temperatures in Table 2.

CLEANING

CAUTIONIMPROPER CLEANING

Ensure cleaning fluids, such as appropriate alcohols or

fluorinated solvents, are used based on the type of

contaminants to be removed.

Do not immerse the sensor.

Failure to comply with these instructions may result in

product damage.

Table 1. Environmental Specifications

Parameter Characteristic

Humidity:

Dry gases only

Liquid media option

0% to 95% RH, non-condensing

100% condensing or direct liquid

media on Port 1

Vibration MIL-STD-202F, Curve AK (20.7 g

random)

Shock MIL-STD-202F, Method 213B,

Condition F

Life1 1 million cycles minimum

Solder reflow J-STD-020-C

Table 2. Absolute Maximum Ratings2

Parameter Min. Max. Unit

Supply voltage -0.3 6.0 VVoltage on output pin -0.3 Vsupply + 0.3 V

ESD susceptibility (human body model) 3 kV

Storage temperature range -40 [-40] 85 [185] °C [°F]

Soldering times and temperature:

Lead solder (SIP, DIP)

Peak reflow (SMT)

4 s max. at 250 °C [482 °F]

15 s max. at 250 °C [482 °F]



Issue 5 50044172

Table 3. Operating Specifications

Parameter Min. Typ. Max. UnitSupply voltage (Vsupply) :

3.3 V

5.0 V

3.0

4.75

3.34

5.04

3.6

5.25

Vdc

Supply current:3.3 V supply5.0 V supply

-

1.62

2.13

mA

Compensated temperature range :HSC SeriesSSC Series

0 [32]-20 [-4]

50 [122]85 [185]

°C [°F]

Operating temperature range :HSC SeriesSSC Series

-20 [-4]-40 [-40]

85 [185]85 [185]

°C [°F]

Startup time (power up to data ready) - 5 msResponse time 1 msUpper output clipping limit 97.5 %VsupplyLower output clipping limit 2.5 %VsupplyAccuracy - ±0.25 %FSS BFSL

Total error band :

HSC SeriesSSC Series

-

--

±1±2

%FSS9

Output resolution 0.03 - - %FSS

Table 4. Wetted Materials10

Parameter Port 1 (Pressure Port) Port 2 (Reference Port)

Covers high temperature polyamide high temperature polyamide

Substrate alumina ceramic alumina ceramic

Adhesives epoxy, silicone epoxy, silicone

Electronic components ceramic, glass, solder, silicon silicon, glass, gold, solder

Notes:

1.

Life may vary depending on specific application in which sensor is utilized.

2.

Absolute maximum ratings are the extreme limits the device will withstand without damage.

3.

Ratiometricity of the sensor (the ability of the device to scale to the supply voltage) is achieved within the specified operating voltage for eachoption. Other custom supply voltages are available, please contact Honeywell Customer Service.

4.

The sensor is not reverse polarity protected. Incorrect application of supply voltage or ground to the wrong pin may cause electrical failure.

5. The compensated temperature range is the temperature range over which the sensor will produce an output proportional to pressure within

the specified performance limits.

6.

The operating temperature range is the temperature range over which the sensor will produce an output proportional to pressure but may not

remain within the specified performance limits.

7.

Accuracy: The maximum deviation in output from a Best Fit Straight Line (BFSL) fitted to the output measured over the pressure range at

25 °C [77 °F]. Includes all errors due to pressure non-linearity, pressure hysteresis, and non-repeatability.

8.

Total Error Band: The maximum deviation from the ideal transfer function over the entire compensated temperature and pressure range.

Includes all errors due to offset, full scale span, pressure non-linearity, pressure hysteresis, repeatability, thermal effect on offset, thermal

effect on span, and thermal hysteresis.

9.

Full Scale Span (FSS) is the algebraic difference between the output signal measured at the maximum (Pmax.) and minimum (Pmin.) limits of

the pressure range.

10. Contact Honeywell Customer Service for detailed material information.

Table 5. Pinout for DIP and SMT Packages

Output Type Pin 1 Pin 2 Pin 3 Pin 4 Pin 5 Pin 6 Pin 7 Pin 8

analog NC Vsupply OUTPUT+ GND NC NC NC NC

Table 6. Pinout for SIP Package

Output Type Pin 1 Pin 2 Pin 3 Pin 4

analog NC Vsupply OUTPUT+ GND



Issue 5 50044172

Figure 2. SMT Pressure Port Dimensional Drawings (For reference only: mm [in])

SMT NN: No ports

13,4[0.53]

10,0[0.39]

6,99[0.275]

1 2 3 4

8 7 6 5

5,44[0.214]

2,54 TYP.[0.100]

6,41[0.252]

4,80[0.189]

8X 0,46 [0.018]

PORT 1 PORT 2

SMT AN: Single axial barbed port

1 2 3 4

8 7 6 5

10,0[0.39]

13,4[0.53]

7,95[0.313]

13,75[0.541]

4,93 DIA.[0.194]

2,54 TYP.[0.100]

PORT 1

PORT 2

6,77[0.266]

4,80[0.189]

8X 0,46 [0.018]

6,99[0.275]

SMT LN: Single axial barbless port

10,0[0.394]

13,35[0.525]6,99

[0.275]

1 2 3 4

8 7 6 5

2,54 TYP.[0.100]

6,77[0.266]

4,80[0.189]

5,80[0.228]

13,75[0.541]

8X 0,46 [0.018]

PORT 1

PORT 2

2,47 DIA.

[0.097]

SMT RN: Single radial barbed port

13,3

[0.53]

10,0[0.39]

6,99[0.275]

1 2 3 4

8 7 6 5

5,80[0.228]

2,54 TYP.[0.100]

6,77[0.266]

4,80[0.189]

8X 0,46 [0.018]

PORT 1

1,93 DIA. [0.076]

4,2[0.17]

PORT 1 PORT 2

SMT RR: Dual radial barbed ports, same side

10,0[0.39]

6,99[0.275]

1 2 3 4

8 7 6 5

6,16[0.242]

2,54 TYP.[0.100]

6,77[0.266]

4,80[0.189]

8X 0,46 [0.018]

13,35

[0.525]

4,6[0.18]

PORT 1

PORT 2

2X 1,93 DIA. [0.076]

PORT 1 PORT 2

4,0[0.16]

3,78[0.149]

SMT DR: Dual radial barbed ports, opposite sides

1 2 3 4

8 7 6 5

13,4[0.53]

PORT 2

PORT 1

10,0[0.39]

6,99[0.275]

2X 2,93 [0.115]

15,8[0.62]

2,54 TYP.[0.100]

2X 1,93 DIA.[0.076]

6,77[0.266]

4,80[0.189]

6,16[0.242]

3,78[0.149]

8X 0,46 [0.018]

Recommended PCB Pad Layout

2,54[0.100]

9,40[0.370]

2,032[0.080]

1,143

[0.045]



Issue 5 50044172

Figure 3. SIP Package Dimensional Drawings (For reference only: mm [in])

SIP NN: No ports

2,54 TYP.[0.100]

10,0[0.39]

15,2[0.60]

10,0[0.39]

1 2 3 4

4X 0,51 [0.020]

4,87[0.192]

PORT 1 PORT 2

0,25[0.010]

SIP AA: Dual axial barbed ports, opposite sides

PORT 1 PORT 2

0,25[0.010]

1 2 3 4

10,0[0.39]

10,0[0.39]

2,54 TYP.[0.100]

15,2[0.60]

22,06[0.869]

2X 4.93 DIA.[0.194]

4X 0,51 [0.020]

SIP AN: Single axial barbed port

0,25[0.010] 2,54 TYP.

[0.100]

PORT 1

1 2 3 4

10,0[0.39]

4.93 DIA.[0.194]

10,0[0.39]

13,75[0.541]

15,2[0.60]

PORT 2

4X 0,51 [0.020]

SIP LN: Single barbless port

10,0[0.39]

15,2[0.60]

10,0[0.39]

1 2 3 4

2,54 TYP.[0.100]

PORT 1

PORT 2

0,25[0.010]

13,75[0.541]

4X 0,51 [0.020]

2,47 DIA.[0.097]

SIP FF: Fastener mount, dual axial barbed ports, opposite sides

0,25[0.010] 2,54 TYP.

[0.100]

29,48[1.161]

1 2 3 4

27,20[1.071]

23,12[0.910]

10,44[0.411]

PORT 1PORT 2

17,78[0.700]

20,16[0.794]

2X 4,78 DIA.[0.188]

2X 3.94 DIA.[0.155]

4X 0,51 [.020]

SIP FN: Fastener mount, single axial barbed port

1 2 3 4

17,78[0.700]

20,16[0.794]

2,54 TYP.[0.100]

0,25[0.010]

29,48[1.161]

23,12[0.910]

PORT 1PORT 2

16,38[0.645]

2X 3.94 DIA.[0.155]

4.78 DIA.[0.188]

4X 0,51 [0.020]



Issue 5 50044172

Figure 3. SIP Package Dimensional Drawings (continued)

SIP GN: Ribbed fastener mount, single axial barbed port

2,54 TYP.[0.100]

21,60[0.850]

PORT 1PORT 2

1 2 3 4

4.78 DIA.[0.188]

0,25[0.010]

2X 3,94 DIA.[0.155]

27,96[1.101]

16,51[0.650]

19,06[0.750]

10,63[0.418]

4X 0,51 [0.020]

SIP NB: Fastener mount, dual axial ports, same side

0,25[0.010]

2,54 TYP.[0.100]

22,87[0.900]

13[0.52]

2X 3.50 DIA.[0.138]

21,60[0.850]

27,31[1.075] 25,3

[0.996]

PORT 1

PORT 2

4 3 2 1

4X 0,51 [0.020]

2X 4,80 DIA.[0.189]

SIP RN: Single radial barbed port

0,25[0.010] 2,54 TYP.

[0.100]

PORT 1

PORT 2

10,0[0.39]

15,2[0.60]

10,0[0.39]

1 2 3 4

5,80[0.228]

1,92 DIA.[0.076]

4X 0,51 [0.020]

SIP RR: Dual radial barbed ports, same side

0,25[0.010] 2,54 TYP.

[0.100]

PORT 1

PORT 2

1 2 3 4

10,0[0.39]

15,2[0.60]

10,0[0.39]

2X 1,92 DIA. [0.076]

6,16[0.243]

4X 0,51 [0.020]



Issue 5 50044172

Figure 3. SIP Package Dimensional Drawings (continued)

SIP DR: Dual radial barbed ports, opposite side

0,25[0.010] 2,54 TYP.

[0.100]

PORT 1 PORT 2

1 2 3 4

10,0[0.39]

10,0[0.39]

15,2[0.60]

6,16[0.243]

2X 4.93 DIA.[0.194]

15,8[0.62]

4X 0,51 [0.020]

SIP HH: Fastener mount, dual radial barbed ports, same side

0,25[0.010]

1 2 3 4

28,96[1.140]

2,54 TYP.[0.100]

PORT 1PORT 2

29,62[1.166]

23,12[0.910]

11,27[0.444]

6,64[0.261]

10,58[0.416]

4X 0,51 [0.020]

PORT 1PORT 2

SIP HN: Fastener mount, single radial barbed port

28,96[1.140]

11,27[0.444]

23,12[0.910]

0,25[0.010] 2,54 TYP.

[0.100]

1 2 3 4

2X 3,94 DIA.[0.155]

7,97[0.314]

4,78 DIA.[0.188]

4X 0,51 [0.020]

PORT 1

PORT 2

SIP MN: Manifold mount, outer diameter seal

2,54 TYP.[0.100]

0,25[0.010]

1 2 3 4

PORT 1PORT 2

15,24 DIA.[0.600]

12,5[0.49]

5,36[0.211]

4X 0,51 [0.020]

SIP SN: Manifold mount, inner diameter seal

2,54 TYP.[0.100]

1 2 3 4

13,11[0.516]

12,57[0.495]

15,6[0.61]

5,1[0.20]

4X 0,51 [0.020]

PORT 1

PORT 2

Recommended PCB Pad Layout

0,914 DIA.[0.036]

2,54

[0.100]



Issue 5 50044172

Sensing and Control

Honeywell

1985 Douglas Drive North

Golden Valley, MN 55422

http://sensing.honeywell.com

50044172-5-EN

August 2012

Copyright © 2012 Honeywell International Inc. All rights reserved.

PERSONAL INJURY

DO NOT USE these products as safety or emergency

stop devices or in any other application where failure of

the product could result in personal injury.

Failure to comply with these instructions could result in

death or serious injury.

WARRANTY/REMEDY

Honeywell warrants goods of its manufacture as being free of

defective materials and faulty workmanship. Honeywell’s

standard product warranty applies unless agreed to otherwise

by Honeywell in writing; please refer to your order

acknowledgement or consult your local sales office for specific

warranty details. If warranted goods are returned to Honeywell

during the period of coverage, Honeywell will repair or replace,

at its option, without charge those items it finds defective. Theforegoing is buyer’s sole remedy and is in lieu of all other

warranties, expressed or implied, including those of

merchantability and fitness for a particular purpose. In no

event shall Honeywell be liable for consequential, special,

or indirect damages.

While we provide application assistance personally, through

our literature and the Honeywell web site, it is up to the

customer to determine the suitability of the product in the

application.

Specifications may change without notice. The information we

supply is believed to be accurate and reliable as of this printing.However, we assume no responsibility for its use.

SALES AND SERVICE

Honeywell serves its customers through a worldwide network

of sales offices, representatives and distributors. For

application assistance, current specifications, pricing or name

of the nearest Authorized Distributor, contact your local salesoffice or:

E-mail: [email protected]

Internet: http://sensing.honeywell.com

Phone and Fax:

Asia Pacific +65 6355-2828

+65 6445-3033 Fax

Europe +44 (0) 1698 481481

+44 (0) 1698 481676 Fax

Latin America +1-305-805-8188

+1-305-883-8257 Fax

USA/Canada +1-800-537-6945

+1-815-235-6847

+1-815-235-6545 Fax

honeywell sensor presion 15pdaa5

Documents