horizontal folding systems and flush sectional doors · the entire building facade, as well as the...
TRANSCRIPT
-
Facade Solutions
Horizontal folding systems and f lush
sect ional doors
Skylabs Heidelberg, horizontal folding shutter with 3D-Covering
D O O R & F A Ç A D E S Y S T E M S
-
Flush horizontal folding shutters & doors
Perfect building structures - open and closed
• perfect sun- and glare protection
• horizontal folding shutters and kinking doors
• specially developed kinking and locking system
• safe wind and burglary protection for a high functional security
• flush installation within the facade with nearly every suface the customer wants
2
Pro Aurum, Munich, Covering with tecu gold
-
3
The horizontal folding systems by BeluTec can be installed for totally different functions.
This follows from the almost unlimited possibilities in the planking of a single folding
shutter. For example, you have the option of using the horizontal folding shutters over
the entire surface as a facade. This gives you a full-surface facade in the closed state and a
window front in the open state, which can be opened completely if necessary.
Lifting shutters pictured above, for example, have been planked with photovoltaic panels,
transforming this rooftop house into a plus-energy accomodation unit. The lift shutters
were created in cooperation with the TU Berlin and the University of the Arts in Berlin for
the 2014 Solar Decathlon Europe Competition. In total, BeluTec has manufactured and
installed 14 flush-mounted shutters for this project.
In the project below in Tirol several folding shutters in different sizes have been used.
BeluTec supplied the frame lattice construction for the on site planking.
The folding shutters, as well as the rest of the facade, were planked on site with Corten
steel.
Architectural house, Tirol, Covering with corten steel
Solar-Decathlon-Europe-Competition, covering with photovoltaic panels
-
4
senso glatt, graualuminium RAL 7016
Flush horizontal folding doors &
Duo doors
Ideal solution for large areas in confined space conditions
• For horizontal folding doors, mounting from the outside is possible
• horizontal folding doors need no space inside
• perfectly suited for individual door openings or facade connections, which should be completely flush
• when opened, the horizontal folding doors offer rain and sun protection
• also available as duo doors with wicket door, that drives in the inside under the roof
• there are no limits for the surface selection of the planking
Kinking doors, high insulated, thermally seperated
THW Göppingen, Galzing with SAN-glass
-
5
For the company building of Klaus Multiparking BeluTec has produced and installed three large kinking doors.
Each of the 5320 x 4180 mm doors has been fitted with a light band. A special feature here is the doubling of the doors
with laser-cut sheet metal. Here, the lettering KLAUS was set up with LED lighting.
The stable frame lattice construction with a depth of 70 mm was delivered in a highly insulated and thermally separated
version.
For the project, which is shown below on page 4, BeluTec supplied a total of seven duo doors, three of them are equipped
with a wicket door. Like the rest of the facade, the seven 7030 x 4100 mm doors have been fitted with a fully transparent
planking.
BeluTec supplied the aluminum frame lattice constructions for this project.
Through the wicket door in the duo doors, the building can be entered quickly without opening the gate completely.
Alternatively, the entire gate can be opened and it is possible to drive directly into the building, for example with vehicles.
The project below includes a total of three BeluTec kinking doors with sizes up to 7200 x 4485 mm. These were manu-
factured in the factory in Lingen and installed on site. The entire building facade, as well as the doors, were covered with
aluminum wall panels.
The special feature of this project is the beveled facade, on which the three illustrated kinking doors had to be adapted.
Furthermore, despite the kining door, a homogeneous facade should be result when door is closed.
As can be seen in the pictures below, the kinking doors in the facade can only be guessed at and thus in no way interrupt
the overall visual impression of the building.
Of course, the doors of this project also serve the increased burglary protection by the specially developed kinking and
locking technology.
Epple Printing center Rüsselsheim, Covering with aluminum panel
5
-
6
Sectional doors in various variants
For industrial or private buildings
Sectional doors are suitable for both private buildings and industrial buildings. Due to the
different possibilities of the planking, these doors, as well as the lifting system, can be ad-
apted to almost any facade.
Through flush mounting, these doors can also merge completely with the facade.
Various installation variants of our sectional doors allow the use even with a small side space
or lintel. Above a sectional door is shown, which stands out already by the side opening
mechanism. The door leaf is kept lamello smooth in the surface.
In the project, which is shown below, BeluTec delivered two approx. 8800 x 4100 mm secti-
onal doors. Each door consists of an aluminum frame lattice substructure. In total, 20 sand-
wich fillings in the colour of the door and the surface stucco were used in each gate. The
special feature of this project is the use of the multi-comfort drive, as well as the tilt fitting
of the company BeluTec. This combination allows the ventilation function when the door is
closed at the bottom, as well as a very small lintel requirement.
Side-Sectional door private house, panel surface is smooth
Vodafone Campus, Düsseldorf, aluminum lattice frame construction with sandwich fillings
-
7
Horizontal folding shutter
for interiour
as a counter closure for cateen or similar
The interior is a special field of application for the BeluTec horizontal folding shutter. This type of folding shutter is ideal as a counter
conclusion, for example in multi-purpose rooms of schools. For example, a room can be used as a cafeteria during break times, but
the canteen disappears completely when the shutters are completely closed and the room could, for example, be used as a function
room.
The flush mounting supports the even wall design and thus prevents a disturbing interruption. Each folding shutter can be covered
in the style of the wall. By default, we offer a width of up to 6 meters, of course, several folding shutters can be placed side by side.
As a special highlight:
The BeluTec folding shutters are available both as a horizontally foldable system and as a vertically foldable system. Thus, the are
nearly no limits for the design of your counter conclusion. In addition, it is possible to install the folding systems with a fold-out tray
slide, as shown in the project below.
Cafeteria Bochum, horizontal folding shutterwith fold-out tray slide
Warendorfer Küchen, horizontal folding shutter in rusty design © Warendorfer Küchen
© Warendorfer Küchen
-
Belu Tec Vertriebsgesellschaft mbHAm Seitenkanal 3 | D-49811 Lingen (Ems)
Phone +49 (0) 591 | 912 04 - 0
Fax +49 (0) 591 | 542 44
[email protected] | www.belutec.com
Interested? For more information, please visit:
O U T D O O R
Private house, Tübingen, lattice frame construction covered with Alucobond
Horizontal folding door made of glass with ZIP
Private house Bissingen, lattice frame construction covered with aluminum composite
D O O R & F A Ç A D E S Y S T E M S G A R A G E D O O R S