Higher Standards for Demanding Applications.

HORIZONTAL UNIVERSALMILLING MACHINES

FU Horizontal

FUTV Horizontal / Vertical Combination

FCM Independant Power Over Arm

FTHV Combination with Variable Speed

STANDARD EQUIPMENT:FU-125-E

• Universaltableswivel+/-45Deg.• Automaticcentrallubesystem.• Lowvoltageelectricalsystemwithpushbuttoncontrol.• Completecoolantsystem.• Chipandcoolanttray.• Onemillingarbor.• Twoarborsupports.• Backlasheliminatorontabletravel.• Variablespeedspindle.• Instructionmanual,servicetools,testreport.• Electronicvariablefeedsin3-axiswithrapid.• Allwayshardenedandground.

FU-125-EUNIVERSAL HORIZONTAL MILLING MACHINE

DIFFERENT STYLES OF VERTICAL HEADS AVAILABLE AS AN OPTION

UNIVERSAL HEAD / MULTI ANGLE UNIVERSAL MILLING HEAD

MOD.

FU-125-E

FU-152-E

A C D F H IBmin. max.

Emin. max.

Gmin. max.

125/8”322

1411/16”373

00

00

81/2”470

175/8”448

5”125

53/4”145

31/8”80

31/8”80

1/2”13

00

191/4”488

181/4”463

41/8”105

51/8”130

83/4”223

93/4”248

271/2”698

281/2”723

133/16”335

151/16”389

45/8”118

45/8”118

Optional Head forFU and FUTV Models

Mounted On theEnd of the Ram

STANDARD EQUIPMENT:FUTV-125-E / FUTV-152-E

•Universaltableswivel+/-45Deg.•Automaticcentrallubesystem.•Lowvoltageelectricalsystemwithpushbuttoncontrol.•Completecoolantsystem.•Chipandcoolanttray.•Onemillingarbor.•Twoarborsupports.•Backlasheliminatorontabletravel.•Variablespeedspindle.• Instructionmanual,servicetools,testreport.•Electronicvariablefeedsin3-axiswithrapid.•Self-motorizedhead.•Allwayshardenedandground.•Handwheelonsaddlefortabletravel(FUTV-152-EOnly).

FUTV-125-E / 152-EUNIVERSAL HORIZONTAL MILLING MACHINE WITH TURRET MILLING HEAD (STANDARD)

TURRET MILLING HEAD WITH BUILT IN QUILL FEED

Standard Head forFUTV-125-E and 152-E

Main Motor 4 HP

Variable Speed With Back Gear 60 - 490 (60 Hz)

Variable Speed With Direct Drive 490 - 4,200 (60 Hz)

Spindle Nose Taper No. 40

Number of Quill Feeds 3

Chromed Quill Diameter 3 3/8” (85.7mm)

Feeds Per Spindle Revolution .0015” - .003” - .006”

.04mm - .08mm - .16mm

Quill Maximum Travel 5” (127mm)

Net Weight 245 lbs. (111 kgs.)

Mounted On the Horizontal Spindle

STANDARD EQUIPMENT:FU-152-E / FCM-152-E

• Universaltableswivel+/-45Deg.• Automaticcentrallubesystem.• Lowvoltageelectricalsystemwithpushbuttoncontrol.• Completecoolantsystem.• Chipandcoolanttray.• Onemillingarbor.• Twoarborsupports(FCM-152-EOnly).• Backlasheliminatorontabletravel.• Variablespeedspindle.• Instructionmanual,servicetools,testreport.• Electronicvariablefeedsin3-axiswithrapid.• Allwayshardenedandground.• Handwheelonsaddlefortabletravel.

FU-152-EUNIVERSAL HORIZONTAL MILLING MACHINE

MULTI ANGLE UNIVERSAL MILLING HEAD WITH MANUAL QUILL TRAVEL

Optional Head forFU and FUTV Models

Mounted On theHorizontal Spindle

MOD.

FU-125-E

FU-152-E

A C D F H I JBmin. max.

Emin. max.

Gmin. max.

13”330.15

5/32”385

00

00

163/16”

411141/2”

73/16”

182.87/8”225

31/8”

80.33/4”94

1/2”

130.0

191/4”

48818”

41/8”

105.51/4”

83/4”

22310”

271/2”

698.285/8”

153/4”400

189/16”427

45/8”118

45/8”118

29/16”65

3”75

ADDITIONAL FEATURES:FCM-152-E

• Poweroverramspindlewithvariablespeedspindle.• Automaticvariablefeedinramtravel.

FCM-152-EUNIVERSAL HORIZONTAL MILLING MACHINE

WITH POWER OVER ARM SPINDLE

(OPTIONAL) MULTI ANGLE UNIVERSAL MILLING HEAD WITH MANUAL QUILL TRAVEL

(STANDARD) MULTI ANGLE UNIVERSAL MILLING HEAD

Shownwithoptionalmillinghead

Bmin. max.

Dmin. max.

Gmin. max.

Hmin. max.

Jmin. max.

CMOD.

FCM-152-E

E F I

5”125

261/2”675

57/8”150

245/8”625

511/16”145

913/16”250

279/16”700

31/8”80

51/8”130

61/2”165

253/16”640

57/8”150

279/16”700

51/8”130

163/4”425

357/16”900

Amin. max. BMOD.

FCM-152-E 75/32”182

27”687

3”75

87/8”225

23/4”70

217/16”545

143/4”375

301/2”775

33/4”94

51/4”134

65/16”161

25”636

87/8”225

283/4”730

167/8”429

359/16”904

Dmin. max.

Emin. max.

Hmin. max.

Imin. max.

Jmin. max.C F G

Amin. max.

Images used in this publication are for illustration purposes only, and may show optional features not included with the model. Republic Lagun is not responsible for any printed or typographical errors. Specification are subject to change without notice. Weights and measurements are approximate and may vary. Please contact

the plant or distributor for further information. Copyright © 2007 Republic Lagun Machine Tool Company

Working Surface 49 1/4” x 11” (1250 x 280mm) 60” x 12 3/4” (1525 x 325mm) 60” x 12 3/4” (1525 x 325mm)Number of T Slots 3” x 5/8” (3 x 16mm) 3” x 5/8” (3 x 16mm) 3” x 5/8” (3 x 16mm)Distance Between T Slots 2 1/2” (63mm) 3 1/8” (80mm) 3 1/8” (80mm)Table Swivel +/- 45° +/- 45° +/- 45°

TABLE

Automatic Longitudinal 33 1/2” (851mm) 41 3/8” (1050mm) 41 3/8” (1050mm)Automatic Cross 12” (290mm) 13” (330mm) 13” (330mm)Automatic Vertical 18 3/4” (475mm) 18 3/4” (475mm) 18 3/4” (475mm)Distance From Spindle to Overarm 5 3/4” (147mm) 5 3/4” (147mm) 5 3/4” (147mm)

TRAVERSE

Spindle Taper #40 #40Main Spindle Diameter 3 1/2” (88.88mm) 3 1/2” (88.88mm)Arbor Milling Diameter 1” (22mm) 1 1/16” (27mm)Number of Speeds Variable Speed Variable SpeedSpeed Range 35 - 1800 RPM 35 - 1800 RPM

HORIZONTAL SPINDLE

Number of Feeds Cont. Variable Speed Cont. Variable SpeedLongitudinal and Cross Feed 0-0.50 IPM (0-1.3mpm) 0-0.50 IPM (0-1.3mpm)Vertical Feed 0-15 IPM (0-0.39mpm) 0-15 IPM (0-0.39mpm)

FEEDS

Longitudinal and Cross 102 IPM (2.6mpm)Vertical Feed 31.5 IPM (0.8mpm)

RAPID TRAVERSE

Main Spindle 5.5 HP 7.5 HP 7.5 HPWorking Feeds - Quick Traverses 2 HP 2.5 HP 2.5 HP

MAIN MOTOR

Coolant Pump 0.12 HP

COOLANT SYSTEM

Ram Travel 21 21/32” (550mm)Spindle Taper #40Number of Speeds Cont. Variable SpeedSpeed Range 35 + 1800 RPMMain Motor Power 5.5 HPWorking Feeds - Quick Traverses 0 + 1300/1500 RPM

POWER OVER RAM

Spindle Taper R8 or #40Number of Speeds VariableSpeed Range (Low) 60 - 490 RPM (60 Hz)Speed Range (High) 490 - 4200 RPM (60 Hz)Main Motor Power 4 HP

RAM MOUNTED HEAD - FUTV

Approximate Net Weight 3970 lbs. (1800 kgs.) 5730 lbs. (2600 kgs.) 6390 lbs. (2900 kgs.)Maximum Weight Over the Table 880 lbs. (300 kgs.) 880 lbs. (400 kgs.) 880 lbs. (400 kgs.)

WEIGHT

SPECIFICATIONS FU-125-E FU-152-E

FCM-152-E FUTV-125-E FUTV-152-E

Distributed By:

800 Sprucelake Drive, Harbor City, CA 90710 • EMAIL info@lagun.com(310) 518-1100 • (800) 421-2105 • FAX (310) 830-0923 • www.lagun.com

Descriptions, specifications and illustrations are subject to change without notice. Republic Lagun is not responsible for misprints or typographical errors. HMM_03-12

OptionalAccessories

HORIZONTAL UNIVERSAL MILLING MACHINES

• Universal Dividing Head 6”- 8”- 10”

• Attachment for Gear Hobbing

• Precision Rotary Table O 10”- O 12.5”

• Rack Milling Attachment

• Universal Vise KURT or TYPE B-50

• Slotting Attachment 5”

• Digital Readout Systems (DRO)

• Long Milling Arbor 6”- 8”- 10”