hose reels[1]

8
Briggs High Performance Hosereels

Upload: enes7

Post on 28-Apr-2015

110 views

Category:

Documents


3 download

TRANSCRIPT

Page 1: Hose Reels[1]

Briggs High Performance Hosereels

Page 2: Hose Reels[1]

The Briggs brand of hosereels is based on the tried and tested Ocmis range, imported and adapted, where necessary, for the UK market.

Proven around the world, the extensive range of hosereels is available in sizes and formats to suit every farm, from the compact R1/1 to the high output VIR10.

In addition to the comprehensive list of standard equipment, we offer an extensive range of options to ensure we can provide exactly the configuration you require.

All machines are backed by the Briggs’ service team and can be supplied with Briggs booms, pumps and rainguns.

R1/1

R2

VR4 VR5

VR8 110/680VR6

R2/1

Page 3: Hose Reels[1]

Each of the turbine powered units is packed with advanced features:

Top quality high density PE hose is manufactured to •resist very heavy drags and high working pressures.Turntables are mounted on large diameter ball bearings •for easy rotation.Drums are supported by large, sealed bearings for very •low maintenance.Three, four or six speed operation is provided by an oil-•bath gearbox with synchronised operation (VR only) for easy gear change within the run. Extra external shaft allows impeller to be turned manually to clear small blockages.The turbine impeller is mounted directly onto the inlet •shaft of the gearbox. This advanced system reduces the head losses to give a wider speed range, even when the flow and the inlet pressure of the machine is low.’ (The impeller shaft on VR machines can be changed without splitting the gearbox).A compressor enables the largest irrigators to be •emptied in 2-4 minutes.

Gear selection lever Drive/neutral pull out lever

Energy efficient impeller with low pressure loss

Turbine nozzle

P.T.0. shaft*

Band brake

External shaft**

Bypass valve for precise speed control

*on VR models, for gearbox protection, the hose cannot be rewound when the gearbox is in gear**on VR gearbox an external shaft can be turned to manually free-off impeller if blocked by debris

Page 4: Hose Reels[1]

STANDARD EQUIPMENT ON ALL MODELSProgram Rain 10 computer control.1. Ball valve on end cap to relieve pressure in delivery hose.2. Slow reverse raingun with set of 4 nozzles & pressure gauge.3. Turbine mounted on the gearbox with built-in bypass.4. Pressure gauge and pressure switch on hosereel inlet.5. Large storage tray mounted on chassis.6. 7m Heavy duty flexible connection pipe.7. Water inlet shut-off valve.8. High capacity in line stone filter. 9. Galvanized offset or centre pull gun trolley mounted 10. on variable track pneumatic wheels (1.4 – 2.2 metres).Safety guards.•Mechanical jack.•Hydraulic lifting of trolley and support legs (Gun trolley only • on R1/1).Galvanized chassis.•P.T.O. winding device.•

STANDARD EQUIPMENT ON R1/1• Mechanicalliftingoftrolley(Hydraulicisoptional).• Mechanicallyoperatedsupportlegs.• 3Speedoilimmersedgearbox.

STANDARD EQUIPMENT ON R2• 3speedoilimmersedgearbox.

STANDARD EQUIPMENT ON R2/1• 6speedoilimmersedgearbox.

STANDARD EQUIPMENT ON VR4, VR5, VR6 & VR7• 3speedoilimmersedgearboxVR4,4speedVR5,VR6&VR7.• Mechanicalrotation.• Sidesupportlegsonfrontofchassis.

STANDARD EQUIPMENT ON VR8, VIR8, VIR10• Hydraulicrotationofturntableandhydraulicjack.• 4speedoilimmersedgearbox.• 4wheelheavydutychassis.• 4xLarge400/60-15.5wheels.• Largedrivegearonbothsidesofthedrum.• Greasekitfordrumbearings.

2

9

8

3 4

5 6

7

1

R1/1 on turf

R2 75-320

VIR8 110-680

Raingun on carrots 10

Page 5: Hose Reels[1]

Options3 Point linkage towing bar (all machines) 1. Large wheels (VR4 and larger)2. Hand pump hydraulics (all machines except VR8 & VR10)3. Engine / hydraulic drive (all machines)4. Hose emptying compressor (R3 and larger)5. Mechanical rotation (R1/1, R2 & R2/1)6. Hydraulic rotation and /or hydraulic jack (R2/1 and larger)7. Turf specification gun trolley (all machines)8. Briggs phone control (see over) (all machines)9. Hosereel mounted booms (R1/1 – VR4)10.

4 wheel chassis (front cover) (VR5 and larger)Galvanised drum (all machines)

1 2 3 4

510

8 69 7

Page 6: Hose Reels[1]

Briggs Program Rain 10 Computer Control

The Briggs Program Rain 10 computer control ensures an even application rate by providing precise control of the retraction speed during the run, regardless of changes in ground conditions, drum diameter and pressure. It also gives automatic shut down of the machine if the speed is not maintained to the correct level, if the pressure drops too low or if the machine has finished the irrigation cycle. The computer is fitted and programmed using only magnetic sensors rather than solenoid valves and micro switches to ensure long term reliability.

Features include:Precise speed control throughout the run resulting in •extremely even application rate.Real time clock and time for the run to finish shown on •display screen.Solar panel to keep the battery charged for the whole •season.Delayed start and stop facility.•Total hours worked shown on the display.•Battery voltage shown on the display.•Automatic shut down if actual speed is less than 70% of set •speed.Adjustable valve opening and closing times.•Up to four speed settings in one run.•Set speed and actual speed displayed.•Length of pipe laid down displayed.•Auto start on a built-in timer facility.•High or low pressure shut down facility.•

Hosereel phone link

The Hosereel phone link has been developed to give growers more efficient use of their irrigation systems by avoiding down time. The system, which is designed, developed and built in the UK, will alert the operator to a problem and enables remote interrogation and control of the hosereel irrigator.

The system is designed to be used from any telephone, including mobile phones, and can be fitted to any new or existing machine with the Program Rain 10 Computer Control unit.

The only information required is the telephone number of the unit and a 3 digit PIN code. Everything else is voice prompted. With one call the operator can check the status, start or stop the reel, hear the new status, change the PIN or change the output numbers etc. There is no need to make separate calls for each function.

Main featuresRing out messages, status and settings are all spoken messages.•One phone call does the lot.•Rings out to user-programmable phone number on any of the following:•

Low water pressure - Stop sensor reached - Speed faultUsers ring in and hear current status: hosereel number, finish time, distance •remaining, speed.On entering a PIN code the hosereel can be paused/unpaused.•Hosereel number (for identifying which hosereel you are listening to), phone-•out number (x2) PIN code and end of run ring out function (ON/OFF) can be easily set or altered by dialling in and entering the current PIN code.Any user activated SIM card can be used to provide the best signal strength •for your area.The GSM module and circuit board are discreetly housed within the Program •Rain 10 panel inside a lockable box.Signal strength indicator mounted on front of Program Rain 10 panel.•Can be retrofitted to any existing Program Rain 10 Panel.•

Page 7: Hose Reels[1]

A hosereeel for every application

Briggs hosereels can be configured to ensure reliable service under a very wide range of conditions including racecourse irrigation, slurry application and to suit conditions around the world.

Racecourse specification hosereel and boom Hosereel and boom in Kenya

VR5 110/470 and raingun VIR8 110/700 and R64/2 boom

Page 8: Hose Reels[1]

Briggs Irrigation, Boyle Road, Corby, Northamptonshire NN17 5XU EnglandTel: 00 44 (0) 1536 260338 Fax: 00 44 (0) 1536 263972

Email: [email protected] Web site: www.briggsirrigation.co.uk

Machine Dimensions (cm)

Model Chassis Length A

Total Height

B

Wheel Track E

Machine width F

Tyre size

R1/1 310 230 510 185 10/8.0-12R2 340 265 560 225 10/8.0-12R2/1 350 296 595 225 10/8.0-12VR4 334 327 224 224 10.0/75-15.3VR5 359 366 230 248 *400/60-15.5VR6 359 395 230 248 *400/60-15.5VR7 364 403 240 260 400/60-15.5VR8 520 435 240 243 400/60-15.5VIR5 378 366 280 248 400/60-15.5VIR6 390 395 280 248 400/60-15.5VIR7 436 395 282 260 400/60-15.5VIR8 470 430 285 218 400/60-15.5VIR10 530 430 296 245 400/60-15.5

*standard wheels on this model are 11.5/80-15.3

Briggs Hosereel Hydraulic Data

Model Machine Size

PE Pipe Thickness

(mm)

RaingunLane Spacing

(m)

Flow Range (m³/hr)

Hose Finish Location

(diagram 1)

Connection Pressure (Bar)

R1/1 63/200 4.7 48-58 15-31 D 5.6-10.063/250 4.7 48-54 15-28 B 6.0-10.063/300 4.7 48-54 15-24 E 6.5-10.070/270 5.2 40-66 17-34 E 6.0-10.075/220 6.5 50-72 20-40 B 6.0-10.075/250 6.5 50-72 20-40 D 6.0-10.082/180 6 50-80 20-50 A 6.0-10.0

R2 70/350 5.2 40-66 15-27 E 6.5-10.075/300 6 40-69 15-33 C 6.0-10.075/330 6 40-69 15-33 E 6.0-10.082/220 7.5 50-78 18-48 B 6.0-10.082/300 7.5 50-74 18-48 D 6.5-10.090/220 8.2 50-80 23-62 A 5.5-10.0

R2/1 75/350 6.5 40-66 15-32 D 6.0-10.082/350 7.5 50-72 18-40 E 6.5-10.082/380 7.5 50-67 18-38 D 6.5-10.082/400 7.5 50-67 18-38 C 6.5-10.090/300 8.2 50-80 23-62 C 5.5-10.090/350 8.2 50-77 23-58 B 5.5-10.0

VR4 82/430 7.5 50-67 18-38 C 6.5-10.090/400 8.2 50-74 23-54 C 6.0-10.090/450 8.2 50-74 23-54 E 6.0-10.090/500 8.2 50-74 23-54 C 6.0-10.0

100/350 9.1 50-86 25-76 C 5.5-10.0100/390 9.1 50-83 25-72 E 5.5-10.0

VR5 & VIR5

100/450 9.1 50-77 28-59 B 6.0-10.0100/470 9.1 50-77 28-54 C 6.0-10.0100/500 9.1 50-77 30-54 D 6.0-10.0110/420 10 60-86 40-76 C 6.0-10.0110/450 10 60-86 40-76 D 6.0-10.0110/470 10 60-86 40-76 E 6.0-10.0120/400 10.4 60-101 40-114 D 6.0-10.0

VR6 & VIR6

100/600 10 60-83 40-50 C 6.0-10.0110/500 10 60-83 40-67 E 6.0-10.0110/530 10 60-80 40-62 D 6.0-10.0110/550 10 60-80 40-62 C 6.0-10.0120/460 9.3 60-101 40-106 E 6.0-10.0125/440 10.4 60-98 40-101 E 6.0-10.0

VR7 & VIR7

110/600 11 60-80 40-62 A 6.0-10.0120/540 11.4 60-101 40-101 A 6.0-10.0125/500 11.4 60-101 40-101 B 6.0-10.0

VR8 & VIR8

110/650 11 60-77 40-60 C 6.0-10.0110/680 11 60-77 40-60 D 6.0-10.0110/700 11 60-77 40-60 E 6.0-10.0120/650 12 60-85 40-72 E 6.0-10.0125/600 13 60-91 40-82 D 6.0-10.0140/470 11.5 60-106 40-120 B 6.0-10.0

VIR10 125/750 14 60-90 40-72 B 6.0-10.0140/600 13 60-94 40-100 D 6.0-10.0

Diagram 1(Hose Finish Location)