hot-rolled cut sheets - voestalpine...led alform® laser cut sheets can also be supplied with oiled...
TRANSCRIPT
Hot-rolled cut sheetswith special laser-cutting capability
voestalpine Anarbeitung GmbH
www.voestalpine.com/anarbeitung
Excellent laser-cutting capabilities.
Narrowest tolerances.
Universal application.
The steel grades of the alform® laser series are thermomechanically or normalized hot-rolled steelswith excellent cold formability which are especially suitable for laser cutting. Minimum yield strengthsof 180 up to 420 MPa are offered.
The alform® laser series of voestalpine StahlGmbH is characterized by
uniform surface and interior condition due tothe extremely high degree of purity with re-spect to non-metallic inclusionsminimum residual stress of the sheets to prevent distortions to the greatest possible extent during cuttingoptimum laser cutting capabilities in respect ofcutting speed and cut quality due to limitedphosphorus and sulphur contents as well as amaximum silicon content of 0.03 %
limited flatness tolerances for the flattest possible blanksbest surface quality due to a thin, homogeneousscale layer as a result of thermomechanical ornormalized rolling
The use of alform® laser steels has proven success-ful in fields requiring extremely precise cuts, burr-free cut edges and parts free of distortion.
Cutting capabilitiesas a result of additional special inspections with respect to surface, dimension tolerances and flatnessas a result of highest cutting speeds and optimum shape of thecut edges due to the optimized chemical compositionas a result of the high degree of purity with respect to non-metallic inclusions (leads to vertical cut edges without undercuts)as a result of the homogeneous and uniform layer of secondaryscale that ensures troublefree operation of laser cutting units andfine drag lines of small depth of roughnessas a result of optimized production conditions from the hot stripmill to cutting to size and straightening on the shearing lines(guaranteed flatness deviations � 3 mm per meter)as a result of limited thickness tolerances (50 % of EN 10051, Tables 3 and 4)
Excellent weldabilitydue to a large range of welding parametersdue to cold cracking resistance without preheatingdue to optimum mechanical-technological properties equivalent to the base material of theweldsdue to excellent formability of the weldsdue to a higher tempering resistance than heat-treatable steelsdue to a low tendency to excessive hardening
Uniform mechanical propertiesthe high constancy of the mechanical proper-ties of alform® laser steels guarantees trouble-free processing even during automatic opera-tion
The advantages
Specifications
alform® laser steels are supplied both in normali-zed and thermomechanically rolled condition. In the event that further processing requires a heat treatment exceeding 580 °C, this would lead to a decrease in the minimumyield strength for thermomechanically rolledsteels (M series).
In such a case normalized rolled steels (N series)could be offered, but only up to a minimum yieldstrength of 380 MPa (However, flame straight-ening up to 800 °C is also possible for thermo-mechanically rolled steels).
Different dimen-
sions upon
request only.
Depending on
their application,
alform® laser steels
can be supplied
with pickled or un-
pickled surface.
Upon request, pick-
led alform® laser cut
sheets can also be
supplied with oiled
surface. For pickled
strip there is the ad-
ditional possibility to
apply a passivation
layer.
Sample cut alform® laser 355 M, thickness 10 mm
The current dimensions for pickled alform® laser steels can be found online in the Steel Product Confi-gurator at http://stahl-produktkonfigurator.voestalpine.com.
DimensionsMinimum width: 900 mm
Maximum width in mm for alform® laser steels
alform® laser alform® laser alform® laser alform® laser alform® laser
Sheet thickness 180 N 200 N 380 N 355 M 420 M
[mm] 240 N 380 M
1.80 - 1.89 1,185 1,360 – 1,050 –
1.90 - 1.99 1,260 1,440 1,100 1,115 1,000
2.00 - 2.24 1,320 1,500 1,120 1,165 1,040
2.25 - 2.49 1,505 1,600 1,175 1,340 1,150
2.50 - 2.74 1,600 1,600 1,235 1,600 1,315
2.75 - 2.99 1,600 1,600 1,290 1,600 1,540
3.00 - 3.24 1,600 1,600 1,350 1,600 1,600
3.25 - 3.49 1,600 1,600 1,410 1,600 1,600
3.50 - 3.74 1,600 1,600 1,475 1,600 1,600
3.75 - 4.50 1,600 1,600 1,535 1,600 1,600
4.51 - 12.00 1,600 1,600 1,600 1,600 1,600
1,200 W
1,500 W
2,200 W
2,600 W
4,000 W
0 2 4 6 8 10 12 14 16 18 20
sheet thickness [mm]
cutt
ing
sp
eed
[m
/min
]
10
8
6
4
2
Maximum cutting speeds with optimum cutting parameters
Chemical composition
C Si Mn P S Al Nb 1) V 1) Ti 1)
Steel grade max. max. max. max. max. min. max. max. max.
alform® laser 180 N 0.08 0.03 0.35 0.018 0.020 0.020 – – –
alform® laser 200 N 0.10 0.03 0.45 0.018 0.020 0.020 – – –
alform® laser 240 N 0.16 0.03 0.70 0.018 0.020 0.020 – – –
alform® laser 380 N 0.18 0.03 1.60 0.018 0.012 0.015 0.05 0.05 0.05
alform® laser 355 M 0.10 0.03 1.20 0.018 0.010 0.020 0.05 0.05 0.05
alform® laser 380 M 0.10 0.03 1.20 0.018 0.010 0.020 0.05 0.05 0.05
alform® laser 420 M 0.10 0.03 1.40 0.018 0.010 0.020 0.05 0.05 0.05
1) The total con-
tent of Nb, V and
Ti may not exceed
0.22 %.
Testing Yield Tensile Fracture Bending test Admissible minimum Impact test 1)
direction strength strength elongation 180°transv. inner radius for 90° ChV -20°C
tensile test [MPa] [MPa] [%] min. s=thickness edging and thickness s [J] min.
1) If demanded in the
order, the impact test
will be carried out
with Charpy-V-notch
samples for thickness
> 6 mm. Specified
value is valid for the
average of three
samples, related to a
sample cross section
of 10x10 mm. 2) For thickness
> 8 mm a minimum
value of 27 J will be
guranteed.3) No gurantee
Mechanical properties
Steel grade ReH Rm A80 A5 mandrel Ø s < 3 s = 3 - 6 s > 6
alform® laser 180 N transverse 180 - 290 280 - 360 28 34 0.0 s 0.25 s 0.5 s 1.0 s 3)
alform® laser 200 N transverse 200 - 320 320 - 400 26 32 0.0 s 0.25 s 0.5 s 1.0 s 3)
alform® laser 240 N transverse 240 - 360 360 - 470 23 28 0.0 s 0.25 s 0.5 s 1.0 s 27
alform® laser 380 N transverse 380 - 520 510 - 610 19 24 0.0 s 0.25 s 0.5 s 1.0 s 40 2)
alform® laser 355 M longitudinal 355 - 480 430 - 530 20 24 0.0 s 0.25 s 0.5 s 0.8 s 40
alform® laser 380 M longitudinal 380 - 510 450 - 550 20 24 0.5 s 0.25 s 0.5 s 0.8 s 40
alform® laser 420 M longitudinal 420 - 550 480 - 580 18 22 0.5 s 0.50 s 1.0 s 1.0 s 40
Information and product properties provided in this publication have the sole purpose of giving non-binding technical guidance and by no means replace individual expert advice from our salesand customer service team. Information and product properties provided in this brochure shall not be deemed guaranteed characteristics unless this has been agreed upon individually.Technical changes reserved, errors and misprints excepted. No part of this publication may be reprinted without explicit written permission by voestalpine Anarbeitung GmbH.
voestalpine Anarbeitung GmbHvoestalpine-Straße 34020 Linz, AustriaT. +43/50304/15-6596F. +43/50304/[email protected]/anarbeitung
Nov
embe
r E
ditio
n 20
11
High-quality materials are the basis for our products. We strive to be the best partner for ourcustomers and want to provide them with the best-possible solution. We focus our expertise on two aspects:The personal aspect, with dedicated and highly competent employeesThe technical aspect, with high-quality methods, products and services
The companies in the voestalpine Steel Division and their employees understand partnershipto be the following:
Understanding for their customers’ businessExpertise and reliabilityResponsibility for satisfactory project completionPartnerships based on trust
Many years of successful partnerships with our customers prove our point.
Technically more advanced. Successful together.voestalpine Steel Division – the partner you can trust.