how to assemble tornado® floats reduced-1

September 20, 2006/Slide 1

HOW TO ASSEMBLE TORNADO®

FLOATS


APPLY Anti-Seize ON ALL BOLTS


LAY OUT Aerator Support Angles


Attach Aerator Support Angles and Cradles- Left


Attach Aerator Support Angles and Cradles- Right


Attach Aerator Cradles


Aerator Support Angles and Cradles Subassemblies


Lay Out Float System Cross Pipes


Attach Angles and Cradles To Pipes - Right


Attach Angles and Cradles to Pipes- Detail


Attach Angles and Cradles to Pipes- Right


Attach Angles and Cradles to Pipes- Left


Lay Out Pontoon Angles and Mooring Brackets


Identify Hardware and Position Angles- Side One


Attach Pontoon Angles Using Hardware- Side One


Pontoon Angles- Both Sides Attached


Pontoon Angle and Mooring Attachment Detail


Pontoon Angle and Mooring Bracket Attached


Lay Out Pontoons, Straps, and Hardware


Attach Pontoon Using Straps and Hardware


Identify and Position Pontoons, Straps, and Hardware


Attach Pontoon to Upper Frame Using Straps and Hardware


Pontoon to Upper Frame Detail- Side One


Identify and Position Pontoons, Straps, and Hardware –Both Sides


Attach Pontoons To Upper Frame Using Straps and Hardware


Tilt Up Approx. 3’ Above Ground and Support One End


Mount Aerator onto the Float Using Hardware.Lock into position at the Desired Angle (30o – 60o)


Aerator Ready For Field Installation


Eight (8) Pontoon Float Systems Can Be Assembled In a Similar Way


The Next Few Photos Illustrate The Concept


Eight (8) Pontoon Float System- Left


Eight (8) Pontoon Float System(Cont’d)


Eight (8) Pontoon Float SystemCompleted

Documents