how to configure dcn wireless & stand alone camera control
DESCRIPTION
How to configure DCN Wireless & Stand Alone Camera Control. This presentation is intended to guide the installer step by step through camera control installation. DCNW CC. How to configure DCN Wireless & Stand Alone Camera Control. DCN-WCCU with direct Camera & Virtual Keyboard - PowerPoint PPT PresentationTRANSCRIPT
1 DCNNG IO SA CCST/PRM3-EU | |23.Mar.06 © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of
disposal such as copying and passing on to third parties.
Security Systems
How to configure DCN Wireless & Stand Alone Camera Control
This presentation is intended to guide the installer step by step through camera control installation.
DCNW CC
2 DCNNG IO SA CCST/PRM3-EU | |23.Mar.06 © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of
disposal such as copying and passing on to third parties.
Security Systems
How to configure DCN Wireless & Stand Alone Camera Control
DCN-WCCU with direct Camera & Virtual Keyboard
DCN-WCCU with direct Camera Control & Autodome Controller
DCN-WCCU with Allegiant Video Switcher
3 DCNNG IO SA CCST/PRM3-EU | |23.Mar.06 © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of
disposal such as copying and passing on to third parties.
Security Systems
DCN-WCCU with direct Camera & Virtual Keyboard
Requirements:
One AutoDome Camera One monitor Virtual keyboard software LTC 5138/00
DCN-WCCU
Temporary Installation PC Camera Control Software LBB 4162/xx
4 DCNNG IO SA CCST/PRM3-EU | |23.Mar.06 © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of
disposal such as copying and passing on to third parties.
Security Systems
Step 1
Connect PC and Monitor to the Dome Camera
RS232
I&U Instructions
Temporary Installation PC
Temporary Installation PC
Make sure that the Dome camera has an address.
5 DCNNG IO SA CCST/PRM3-EU | |23.Mar.06 © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of
disposal such as copying and passing on to third parties.
Security Systems
AutoDomeCamera
Step 2
Install virtual keyboard software LTC 5138/00
I&U Instructions
Temporary Installation PC
Temporary Installation PC
6 DCNNG IO SA CCST/PRM3-EU | |23.Mar.06 © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of
disposal such as copying and passing on to third parties.
Security Systems
Step 3
Configure Virtual Keyboard
7 DCNNG IO SA CCST/PRM3-EU | |23.Mar.06 © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of
disposal such as copying and passing on to third parties.
Security Systems
Step 4
Communication Setup
8 DCNNG IO SA CCST/PRM3-EU | |23.Mar.06 © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of
disposal such as copying and passing on to third parties.
Security Systems
Step 5
Make sure you choose the right camera!!
9 DCNNG IO SA CCST/PRM3-EU | |23.Mar.06 © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of
disposal such as copying and passing on to third parties.
Security Systems
Step 6
10 DCNNG IO SA CCST/PRM3-EU | |23.Mar.06 © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of
disposal such as copying and passing on to third parties.
Security Systems
Step 7
Quick Commands settings
11 DCNNG IO SA CCST/PRM3-EU | |23.Mar.06 © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of
disposal such as copying and passing on to third parties.
Security Systems
Step 8
Pre-Position Title Set
12 DCNNG IO SA CCST/PRM3-EU | |23.Mar.06 © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of
disposal such as copying and passing on to third parties.
Security Systems
Step 9
Set Pre-Positions
13 DCNNG IO SA CCST/PRM3-EU | |23.Mar.06 © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of
disposal such as copying and passing on to third parties.
Security Systems
Step 10
14 DCNNG IO SA CCST/PRM3-EU | |23.Mar.06 © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of
disposal such as copying and passing on to third parties.
Security Systems
Repeat
Repeat Step 9 & 10 to set all Pre-Positions
Set the highest Pre-Position as overview
15 DCNNG IO SA CCST/PRM3-EU | |23.Mar.06 © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of
disposal such as copying and passing on to third parties.
Security Systems
Step 11
Check the Pre-Positions
To NEXT >>>>>>
16 DCNNG IO SA CCST/PRM3-EU | |23.Mar.06 © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of
disposal such as copying and passing on to third parties.
Security Systems
End of how to configure:
DCN-WCCU with direct Camera & Virtual Keyboard
DCN-WCCU with direct Camera Control & Autodome Controller
DCN-WCCU with Allegiant Video Switcher
17 DCNNG IO SA CCST/PRM3-EU | |23.Mar.06 © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of
disposal such as copying and passing on to third parties.
Security Systems
DCN-WCCU with direct Camera Control & Autodome Controller
Requirements:
One AutoDome camera Monitor(s) Autodome Controller LTC 5136/51
DCN-WCCU
Temporary Installation PC Camera Control Software LBB 4162/xx
18 DCNNG IO SA CCST/PRM3-EU | |23.Mar.06 © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of
disposal such as copying and passing on to third parties.
Security Systems
AutoDomeCamera
Step 1
Only for Pre setting the Autodome Camera with the Autodome Controller Connect Autodome Controller to data converter LTC 5136/51 Connect Data converter to Aurodome Camera Connect Autodome Camera to Monitor
IUI Autodome
Temporary Autodome Controller
Temporary Autodome Controller
Data ConverterData Converter
For Installation and User Instructions Autodome ControllerFor Installation and User Instructions Autodome Controller
19 DCNNG IO SA CCST/PRM3-EU | |23.Mar.06 © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of
disposal such as copying and passing on to third parties.
Security Systems
Remark
If you were not successful setting up the pre-positions please don’t continue with the next steps.
First make sure that the pre-positions are set.
20 DCNNG IO SA CCST/PRM3-EU | |23.Mar.06 © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of
disposal such as copying and passing on to third parties.
Security Systems
Port 2Camera Control
Protocol
Baudrate 9.6K
Port 2Camera Control
Protocol
Baudrate 9.6K
Step 2
Connect DCN-WCCU to PC
RS232
I&U Instructions
Temporary Installation PC
Temporary Installation PC
21 DCNNG IO SA CCST/PRM3-EU | |23.Mar.06 © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of
disposal such as copying and passing on to third parties.
Security Systems
Step 3
CCU protocol and Serial Port settings DCN-WCCU
Make sure that the ports of the CCU are set correct.
Port 1Protocol = FullBaudrate = 115.2K
Port 2Protocol = Camera ControlBaudrate = 9.6K
Keep in mind !!
You have to change the baudrate of Port 2 to 9.6K !!
S500 Dip switches
I&U Instructions
22 DCNNG IO SA CCST/PRM3-EU | |23.Mar.06 © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of
disposal such as copying and passing on to third parties.
Security Systems
Step 4
Make sure you connect the RS232 cable to Port 2 of the DCN-WCCU.
23 DCNNG IO SA CCST/PRM3-EU | |23.Mar.06 © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of
disposal such as copying and passing on to third parties.
Security Systems
Step 5
Install DCNNG Stand Alone Camera Control software LBB4162
24 DCNNG IO SA CCST/PRM3-EU | |23.Mar.06 © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of
disposal such as copying and passing on to third parties.
Security Systems
Step 6
Install Camera Control software LBB4162
25 DCNNG IO SA CCST/PRM3-EU | |23.Mar.06 © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of
disposal such as copying and passing on to third parties.
Security Systems
Step 7
Install Camera Control software LBB4162
26 DCNNG IO SA CCST/PRM3-EU | |23.Mar.06 © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of
disposal such as copying and passing on to third parties.
Security Systems
Step 8
Install Camera Control software LBB4162
27 DCNNG IO SA CCST/PRM3-EU | |23.Mar.06 © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of
disposal such as copying and passing on to third parties.
Security Systems
Step 9
Select the language for operator
28 DCNNG IO SA CCST/PRM3-EU | |23.Mar.06 © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of
disposal such as copying and passing on to third parties.
Security Systems
Step 10
Select no use of Allegiant VideoSwitcher
29 DCNNG IO SA CCST/PRM3-EU | |23.Mar.06 © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of
disposal such as copying and passing on to third parties.
Security Systems
Step 11
Installing DCNNG Stand Alone Camera Control software LBB4162
30 DCNNG IO SA CCST/PRM3-EU | |23.Mar.06 © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of
disposal such as copying and passing on to third parties.
Security Systems
Step 12
Finish installation
31 DCNNG IO SA CCST/PRM3-EU | |23.Mar.06 © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of
disposal such as copying and passing on to third parties.
Security Systems
Step 13
Start DCN Next Generation Camera Install
32 DCNNG IO SA CCST/PRM3-EU | |23.Mar.06 © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of
disposal such as copying and passing on to third parties.
Security Systems
Step 14
Combine seat numbers with camera pre positions
LBB4162
33 DCNNG IO SA CCST/PRM3-EU | |23.Mar.06 © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of
disposal such as copying and passing on to third parties.
Security Systems
Step 15
Make sure you choose the right camera!!Camera nr = Camera Address
LBB4162
34 DCNNG IO SA CCST/PRM3-EU | |23.Mar.06 © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of
disposal such as copying and passing on to third parties.
Security Systems
Step 16
Insert
LBB4162
35 DCNNG IO SA CCST/PRM3-EU | |23.Mar.06 © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of
disposal such as copying and passing on to third parties.
Security Systems
Step 17
Stop Camera Installation
5
LBB4162
36 DCNNG IO SA CCST/PRM3-EU | |23.Mar.06 © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of
disposal such as copying and passing on to third parties.
Security Systems
AutoDomeCamera
Step 18
Connect DCN-WCCU to AutoDome Camera
I&U Instructions
RS232
Baudrate 9.6KBaudrate 9.6KPort 2
Camera Control Protocol
Baudrate 9.6K
Port 2Camera Control
Protocol
Baudrate 9.6K
37 DCNNG IO SA CCST/PRM3-EU | |23.Mar.06 © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of
disposal such as copying and passing on to third parties.
Security Systems
End of how to configure:
DCN-WCCU with direct Camera Control & Autodome Controller
DCN-WCCU with Allegiant Video Switcher
38 DCNNG IO SA CCST/PRM3-EU | |23.Mar.06 © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of
disposal such as copying and passing on to third parties.
Security Systems
DCN-WCCU with Allegiant Video Switcher
Requirements:
Allegiant switcher Video Switcher keyboard Fixed and/or AutoDome cameras Monitor(s)
DCN-WCCU
Temporary Installation PC Camera Control Software LBB 4162/xx
39 DCNNG IO SA CCST/PRM3-EU | |23.Mar.06 © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of
disposal such as copying and passing on to third parties.
Security Systems
Step 1
Connecting system hardware
BOSCH
Temporary Installation PC
Temporary Installation PC
40 DCNNG IO SA CCST/PRM3-EU | |23.Mar.06 © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of
disposal such as copying and passing on to third parties.
Security Systems
DCN-WCCU
Step 2
Connect DCN-WCCU & Allegiant Switcher to Temporary PC
RS232 RS232Baudrate 19.2K
Port 2Camera Control
Protocol
I&U Instructions
Baudrate 19.2KAllegiant SwitcherAllegiant Switcher
41 DCNNG IO SA CCST/PRM3-EU | |23.Mar.06 © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of
disposal such as copying and passing on to third parties.
Security Systems
Step 3
CCU protocol and Serial Port settings DCN-WCCU
Make sure that the ports of the CCU are set correct.
Port 1Protocol = FullBaudrate = 115.2K
Port 2Protocol = Camera ControlBaudrate = 19.2K
S500 Dip switches
I&U Instructions
42 DCNNG IO SA CCST/PRM3-EU | |23.Mar.06 © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of
disposal such as copying and passing on to third parties.
Security Systems
Step 4
Make sure you connect the RS232 cable to Port 2 of the DCN-WCCU.
43 DCNNG IO SA CCST/PRM3-EU | |23.Mar.06 © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of
disposal such as copying and passing on to third parties.
Security Systems
Step 5
Install DCNNG Stand Alone Camera Control software LBB4162
44 DCNNG IO SA CCST/PRM3-EU | |23.Mar.06 © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of
disposal such as copying and passing on to third parties.
Security Systems
Step 6
Installing DCNNG Stand Alone Camera Control software LBB4162
45 DCNNG IO SA CCST/PRM3-EU | |23.Mar.06 © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of
disposal such as copying and passing on to third parties.
Security Systems
Step 7
Installing DCNNG Stand Alone Camera Control software LBB4162
46 DCNNG IO SA CCST/PRM3-EU | |23.Mar.06 © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of
disposal such as copying and passing on to third parties.
Security Systems
Step 8
Installing DCNNG Stand Alone Camera Control software LBB4162
47 DCNNG IO SA CCST/PRM3-EU | |23.Mar.06 © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of
disposal such as copying and passing on to third parties.
Security Systems
Step 9
Select the language for operator
48 DCNNG IO SA CCST/PRM3-EU | |23.Mar.06 © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of
disposal such as copying and passing on to third parties.
Security Systems
Step 10
Select use Allegiant VideoSwitcher
49 DCNNG IO SA CCST/PRM3-EU | |23.Mar.06 © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of
disposal such as copying and passing on to third parties.
Security Systems
Step 11
Installing DCNNG Stand Alone Camera Control software LBB4162
50 DCNNG IO SA CCST/PRM3-EU | |23.Mar.06 © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of
disposal such as copying and passing on to third parties.
Security Systems
Step 12
Finish installation
51 DCNNG IO SA CCST/PRM3-EU | |23.Mar.06 © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of
disposal such as copying and passing on to third parties.
Security Systems
Step 13
Set Pre-Positions using the Video Switcher Keyboard
52 DCNNG IO SA CCST/PRM3-EU | |23.Mar.06 © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of
disposal such as copying and passing on to third parties.
Security Systems
Step 14
Start DCN Next Generation Camera Install
53 DCNNG IO SA CCST/PRM3-EU | |23.Mar.06 © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of
disposal such as copying and passing on to third parties.
Security Systems
Step 15
Combine seat numbers with camera pre positions
LBB4162
54 DCNNG IO SA CCST/PRM3-EU | |23.Mar.06 © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of
disposal such as copying and passing on to third parties.
Security Systems
Step 16
Make sure you choose the right camera!!Camera nr = Camera Address
LBB4162
55 DCNNG IO SA CCST/PRM3-EU | |23.Mar.06 © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of
disposal such as copying and passing on to third parties.
Security Systems
Step 17
Insert
LBB4162
56 DCNNG IO SA CCST/PRM3-EU | |23.Mar.06 © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of
disposal such as copying and passing on to third parties.
Security Systems
Step 18
Stop Camera Installation
5
LBB4162
57 DCNNG IO SA CCST/PRM3-EU | |23.Mar.06 © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of
disposal such as copying and passing on to third parties.
Security Systems
Step 19
Connecting hardware (Remove temporary PC!)
BOSCH
See next slide
Temporary Installation PC
Temporary Installation PC
58 DCNNG IO SA CCST/PRM3-EU | |23.Mar.06 © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of
disposal such as copying and passing on to third parties.
Security Systems
Step 20
Connection cable between DCN-WCCU and Allegiant Switcher
I&U Instructions
59 DCNNG IO SA CCST/PRM3-EU | |23.Mar.06 © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of
disposal such as copying and passing on to third parties.
Security Systems
End of how to configure:
DCN-WCCU with Allegiant Video Switcher
DCNW CC