How to Install Diablosport InTune Tuner and Tune Included Accessories(List of Tools): 1)InTune Tuner 2)Instruction booklet 3)USB cable 4)OBDII connector Step 1: Insert the OBDII connector right below the dashboard on the driver’s side. Next, insert the other end of the cable into the bottom of the InTune Tuner.

Step 2: The device will take a few moments to load up the software. It will then bring you to the main screen giving you the following options: “Tune Vehicle”, “Scan Tool” and “Settings”. The Scan Tool gives you the option for data logging various aspects of your vehicle such as: air-fuel ratio, engine rpm, vehicle speed, etc. which you can record and later view on your computer. The Scan Tool can also view any codes(ex. Check Engine) that your car may be throwing and allows you the option to clear these codes. However, for the purpose of this tutorial we are going to choose the “Tune Vehicle” option.

Step 3:The next screen will give you the option to “Write Vehicle”, “Restore Vehicle” or “Adjust Parameters”. We are going to choose “Write Vehicle”.

Step 4: The device will ask you to turn the key to the “ON” position, it warns you not to start the engine.*

Step 5: The next screen will ask you to choose which 'tune' you would like to load onto the vehicle. Any preloaded BAMA tunes will be located in the folder that says “Custom Tune”.

Generally speaking there should be 3 levels of tunes, they may be different based on your application. S-Street P-Performance R-Race

Choose a tune, then click on the green check mark.

Step 6: At this point the tune you have chosen will begin to load to your vehicle. The device will ask you to turn the car to the 'ON' and 'OFF' position at various times, just follow the on-screen instructions and click the green check mark when you have completed each action.

At this point the tune will be uploading to your vehicle, the whole process takes about 3-5 minutes.

Step 7: Congratulations you have just finished uploading your new custom tune to your vehicle. You can now remove the device from the OBDII connector and proceed to burn some tires while enjoying the new tune.

Instructions written by AmericanMuscle customer: George Rigby 6.14.13