how to install the pivoting toilet paper holder accessory...
TRANSCRIPT
1299648-2A-A 1
72784T / 72785T
ELLISTON72784T 18″ Towel Bar72785T 24″ Towel Bar72786T Towel Ring72787T Pivoting Toilet Paper Holder72788T Robe Hook
8630
457 (610)
508 (660)
Ø6
Ø51
18
1299648-2A-A 4
5
6
10
9
3
49
5
6
11
BEFORE YOU BEGIN
All information is based on the latest product information available at the time of publication. Kohler Co. reservesthe right to make changes in product characteristics, packaging, or availability at any time without notice.
Please leave these instructions for the consumer. They contain improtant information.
NOTE:These products should be located and mounted to a wall. While it is possible to mount them to any surface, a studor concrete mounted product will yield the best results.
DANGER: (Risk of personal injury)These products are not designed or intended for use as a grab bar or support bar. Do not install where the productmight be used as a grab or support bar.
ROUGH-IN DIMENSIONS
CLEANNING INSTRUCTIONS
INSTALLATION CHECKOUT
Ensure that all connections are tightened.
Ensure all setscrews face straight down.
All finishes: clean the finish with mild soap and warm water. Wipe entire surface completely dry with clean soft cloth. Many cleaners may contain chemicals, such as ammonia, chlorine, toilet cleaner etc. which could adverselyaffect the finish are not recommended for cleaning.
Do not use abrasive cleaners or solvents on Kohler faucets and fitting.
How To Install The Pivoting Toilet Paper Holder
Slide the pivoting toilet paper kit(9) and escutcheon(10) onto the bracket(4) and (3) respectively. Orient the screwhole downward. Tighten the screw(5) with the hex wrench(6) to secure pivoting toilet paper holder. Insert paperby turning the pivoting toilet paper kit(9) anticlockwise.
open
How To Install The Robe Hook
Slide the escutcheon(11) onto the bracket. Orient the screw hole of escutcheon downward. Tighten the screw(5) with the hex wrench(6) to secure robe hook.
ACCESSORY INSTALLATION INSTRUCTIONS
1299648-2A-A 2
194
Ø6
30
18
Ø51
16367
59
157
72786T
117
Ø6
18
Ø51
30
85
72788T
Ø51
8530
Ø6
111
171
72787T
1299648-2A-A 3
1
2
3 4
1
2
Only for 72784T / 72785T
Only for 72787TOnly for 72786T / 72788T
5
67
5
6 8
INSTALLATION
Stick The Templet
As shown below, select a location on the vertical wall to stick the templet, ensure the templet is horizontal and the arrow direction upward. Drill hole in the finished wall as requirement.
Install The Bracket
As shown in below, press the anchor(1) into the hole. Orienting the bracket(3)(4) and ensure the arrow direction onbracket upward. Secure the bracket with the self-tapping screw(2).
How To Install The Towel Bar
Slide the extension of towel bar kit(7) onto the bracket. Orient the screw hole of the extension downward. Tightenthe screw(5) with the hex wrench(6) to secure towel bar kit.
How To Install The Towel Ring
Slide the extension of towel ring kit(8) onto the bracket. Orient the screw hole of the extension downward. Tightenthe screw(5) with the hex wrench(6) to secure towel ring kit.
1299648-2A-A 5
1208480
1209101
1315913
1209110
1023303
1023551
1315913
1023303
1209101
1209101
1208480
1315913
1023303
ELLISTON
**Color code must be specified when orderingNOTE: For all Asia pacific regions (excluding China) add SP (SPxxxxxxx**) in front of the part number when ordering.
72784T 18″ Towel Bar72785T 24″ Towel Bar72786T Towel Ring72787T Pivoting Toilet Paper Holder72788T Robe Hook
1209101
ACCESSORY SERVICE PARTS