how to install xenserver tools - linux _ knowledgelayer

SALES : 866.398.7638 SUPPORT : 866.403.7638 CONTACT US PORTAL BLOG

Home Topics Forums Search this site: Search this site: Search this site: Search this site:

Share this article: How to install XenServer Tools - Linux

Within this tutorial we will cover how to install XenServer Tools to your virtual machines. This applies to CentOS, Debian and Red Hat operating systems.

1. Open up XenCenter and establish a connection to your XenServer. Here is an example of a Virtual Machine that is a fresh install but does not have XenServer

Tools setup. You will notice that for "Virtualization State:" the software says "Tools not installed".

2. Let's get started by simply right-clicking on the name of our Virtual Machine and clicking "Install XenServer Tools". A warning will come up stating that, "Any CD

or DVD currently in the Virtual Machine's CD drive will be ejected when xenServer Tools are installed." Click on "Install ZenServer Tools" to continue unless you are

currently using a CD in the VM. If so, continue this tutorial at a time when the virtual disk drive is free for use.

3. You should be sent to the console tab of XenCenter for your Virtual Machine. You will notice that at the top of the window, below the tabs that the software is

telling you that it has the CD image of "xs-tools.iso" loaded into the DVD Drive. It also provides you with the device name within the system.

4. You can do the following steps via either the console or via an SSH session to the system. I will perform the installation using SSH. Here is the output of my

KnowledgeLayer

Home » Virtualization » How to install XenServer Tools - Linux

How to install XenServer Tools - Linux | KnowledgeLayer http://knowledgelayer.softlayer.com/learning/how-install-xenserver-tool...

1 de 3 08/05/2014 10:15

session. Remember that the drive's device name is provided by XenCenter.

$ ssh 10.17.37.243

[email protected]'s password:

Last login: Thu Sep 11 12:57:31 2008 from 10.0.80.84

[root@ns0 ~]# cd /mnt

[root@ns0 mnt]# ls

[root@ns0 mnt]# mkdir xs-tools

[root@ns0 mnt]# mount /dev/xvdd /mnt/xs-tools/

mount: block device /dev/xvdd is write-protected, mounting read-only

[root@ns0 mnt]# cd /mnt/xs-tools/Linux/

[root@ns0 Linux]# bash install.sh

Detected `CentOS release 5.2 (Final)' (centos version 5).

The following changes will be made to this Virtual Machine:

* packages to be installed/upgraded:

- kernel-xen-2.6.18-53.1.13.el5.xs4.1.0.24.x86_64.rpm

- xe-guest-utilities-4.1.0-257.x86_64.rpm

Continue? [y/n] y

Preparing...########################################### [100%]

1:xe-guest-utilities########################################### [100%]

Preparing...########################################### [100%]

package kernel-xen-2.6.18-92.el5 (which is newer than kernel-xen-2.6.18-53.1.13.el5.xs4.1.0.24) is

already installed

You should now reboot this Virtual Machine.

[root@ns0 Linux]#

If you would like to simply copy and paste into your shell, the following lines should perform all of the steps provided that you are assigned the same device name

of /dev/xvdd

mkdir /mnt/xs-tools

mount /dev/xvdd /mnt/xs-tools

cd /mnt/xs-tools/Linux/

bash install.sh

5. The XenServer Tools installation script does a reasonable job of determining the best way to install what it needs without much intervention. If everything went

well you should be able to reboot your system from the command line and when it restarts you can see that XenServer Tools are installed as in the following image.

6. Now XenCenter will be able to have a bit more control of the operating system within the Virtual Machine and you will also be able to view the previously

unavailable counters within the "Performance" tab of XenCenter.


2 de 3 08/05/2014 10:15

how to install xenserver tools - linux _ knowledgelayer

Documents