how to properly use a microscope. parts of microscope eye piece tube revolving nosepiece low power...
TRANSCRIPT
How to Properly Use a Microscope
Par
ts o
f Mic
rosc
ope
eye piece tube
revolving nosepiece
low power objectivemedium power objectivehigh power objective
stage clips
diaphragm
light source
eye piece lens
arm
stage
fine focus adjustment
base
course focusadjustment
Fun
ctio
n of
Par
ts holds eyepiece
selects objectives
wider anglemagnifies 4x
medium angle magnifies 10x
smallest angle magnifies 40x
holds slide to stageadjusts amount
of light through stage
light goes up through specimen
to your eye
magnifies 10x
hold to carry
slide lays on
focus on high power
hold to carry
focus on low power
Steps to Properly Use Microscope
1. Use course adjustment to lower stage all the way to the bottom. DO IT SLOWLY!!!
2. Use nosepiece to turn to low power objective.
3. Lay slide onto stage. Use the stage clips to make sure slide doesn’t move greatly. Make sure specimen is over the light hole.
4. While looking trough the eyepiece slowly use the course adjustment to focus specimen.
Steps to Properly Use Microscope
5. Once it is focus you can switch to the medium objective. You shouldn’t have to adjust the focus. If you need to move slide be careful and keep clips on the slide. Do it slowly!
6. You can switch to high power. Use the fine adjustment to focus. DO IT SLOWLY! NEVER LET THE OBJECTIVE TOUCH THE SLIDE! YOU WILL BREAK THE OBJECTIVES LENS!