how to read the allmetal cataloghow to read the allmetal catalog using adobe’s acrobat reader the...
TRANSCRIPT
How to Read the Allmetal Catalog Using Adobe’s Acrobat Reader
Example: page 39 of 309 pages as viewed in Acrobat.
The Navigational Arrows will allow you to move from one page to another, much like flipping through pages in a book. The two arrows in the center will turn one page at a time, either forward or back. The two outer arrows will move you either to the beginning or
end of the catalog. You can enter a specific page number and go directly to it by pressing the enter key. Sections may be selectedby clicking on their names in the index at the left.
The Find button allows you to enter a word or term you are looking for then takes you to the first page that has that text. You can click “find Next” to find additional pages within the catalog that also contain your text. You can also specify whether you want to search toward the front of the catalog or toward the back.
The Page View buttons give you the choice of viewing a page at (in order) 100% Scale, having the whole page fill the window, or having the width fill the window (if you choose this option, the page will be larger but, you may need to use the scroll bars to view the entire page to the bottom).
Another way you can control the view size of you page is by using the magnification or Zoom button. Simply select this button, then click on an area you want to zoom in on. Remember, you can always get back to a full page view by selecting one of the page view buttons described above. When you want to print a page or range of pages, click on the Print button. This will bring up the print dialogue window. Specify which pages to print and which printer (if there is more than one available to you).
For more detailed instructions on using Adobe Acrobat Reader, please refer to their instruction manual online at http://www.adobe.com/products/acrobat/pdfs/acrruserguide.pdf
PRINT THIS PAGE AND USE IT FOR REFERENCE.
The scroll bars allow you to move the page or list up or down as needed.
You can do this by clicking on either the arrows at the top or bottom of the bar or by clicking on the sliding box
and sliding it up or down without releasing the mouse button.
You can select specific sections from this index by clicking
on them directly.
i
Welcome to the New Allmetal Full Line Catalog
Terms of SalePlease read the Terms and Conditions of Sale found on page viii ofthis catalog. The Terms & Conditions of Sale Section covers freightand shipping, payments and warranties of Allmetal’s products.
Part NumbersAllmetal strives to provide the best product options for its customers.Because a part number is not assigned until the part is manufactured,and because each unique length of lineal goods requires a unique partnumber, we are unable to provide part numbers for all products. Wehave supplied part numbers where available for the corner keys,straight connectors, screen and decorative components.
AllmetalDirect.comYou can place orders directly over the internet by using our onlineorder center at www.AllmetalDirect.com. The site contains your orderhistory for quick and easy re ordering. It also contains part numbersand pricing for our entire stock of available items. All customers havebeen issued a secure customer number and password to use the site.For any questions contact your Allmetal Customer ServiceRepresentative or call 1 800 638 2599.
This catalog replaces your current catalog so please disregard any existing catalogsyou may have.
Pricing information has not been included in this catalog. The Allmetal Price List isavailable upon request from your sales representative.
ii Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Material Specification Data
Laser-Welded.014" Clear & Color-InTM Anodized Aluminum 1/2 hard temperThickness tolerance ± .0015".016" Clear & Color-InTM Anodized Aluminum 1/4 hard temper for 90° bendingThickness tolerance ± .0015".016" Mill Finish Aluminum 1/4 hard temper for 90° bendingThickness tolerance ± .0015".015" Black SteelThickness tolerance ± .0005".008" and .012" Hi-Q SteelThickness Tolerance ± .0005"
Flat Muntin Bar* .0185" & .024" Painted, Mill FinishThickness tolerance will not exceed ±.0025"
Contour Muntin Bar*5.5 x 18mm & 8 x 18mm sizes are available in .016" Painted, Mill Finish8 x 25mm size is available in .0185" Painted, Mill Finish, also 5.5 x 25 cmbThickness tolerance will not exceed ± .0025"
Screen Channel*.0215" White Only, .0185" & .024" Painted and Mill Finish AluminumThickness tolerance will not exceed ± .0025"
SDL Channel .014" and .016" Clear & Color-InTM Anodized AluminumThickness tolerance will not exceed ± .0005"
Sill Track Cover.016" Stainless Steel (SST) Thickness tolerance will not exceed ± .0005"
Slimline Bar*.016" Painted, Mill FinishThickness tolerance will not exceed ± .0005"
*Please check “Color Availability” chart.
iiiPlease see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Thermal Conductivity Data
General notes:
The lower the thermal conductivity, the more thermally resistant it is.
For a given substance, the less substance that heat energy must pass through, the more thermally resistant itbecomes. Therefore, thinner gauges of a given substance thermally perform better than thicker ones.
For a given substance and thickness, the longer the path that the energy must pass through, the morethermally resistant it becomes. Therefore, a wider spacer tube thermally performs better than a narrow one,assuming all else is the same.
Thermal Conductivity Thermal ExpansionEnglish Metric English Metric
Btu-in/h-ft-°F W/m°C in/in/°F (x10-6) cm/cm/°C(x10-6)Aluminum
.016" .0185" Mill Finish 1190 171.63 13.1 23.6
.010", .014", .016",
.0185" Anodized 1190 171.63 13.1 23.6Steel
.008", .012" Hi-Q 333 48 8.7 15.7
.014" EG 333 48 8.7 15.7
.015" Black 333 48 8.7 15.7Stainless Steel
General Data 103 14.86 8.7 15.7Plastics
Nylon 6 - Unreinforced 1.87 0.27 50.6 91.1ABS - Unreinforced 1.04 0.15 50.3 90.6Polyester - Unreinforced 1.18 0.17 75 135
iv Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Fractional Decimal
1/64 .0161/32 .0313/64 .0471/16 .0635/64 .0783/32 .0947/64 .1091/8 .1259/64 .1415/32 .15611/64 .1723/16 .18813/64 .2037/32 .21915/64 .2341/4 .250
17/64 .2669/32 .28119/64 .2975/16 .31321/64 .32811/32 .34423/64 .3593/8 .375
25/64 .39113/32 .40627/64 .4227/16 .43829/64 .45315/32 .46931/64 .4841/2 .500
Fractional Decimal
33/64 .51617/32 .53135/64 .5479/16 .56337/64 .57819/32 .59439/64 .6095/8 .625
41/64 .64121/32 .65643/64 .67211/16 .68845/64 .70323/32 .71947/64 .7343/4 .750
49/64 .76625/32 .78151/64 .79713/16 .81353/64 .82827/32 .84455/64 .8597/8 .875
57/64 .89129/32 .90659/64 .92215/16 .93861/64 .95331/32 .96963/64 .984
1 1.000
Millimeter Decimal
1.0 .0391.5 .0592.0 .0792.5 .0982.8 .1103.0 .1183.5 .1374.0 .1574.5 .1775.0 .1975.2 .2055.5 .2176.0 .2366.3 .2486.5 .2566.8 .2687.0 .2767.5 .2958.0 .3158.3 .3278.5 .3358.7 .3439.0 .3549.5 .37410.0 .39410.1 .39810.3 .40610.5 .41310.7 .42110.8 .42511.0 .43311.2 .44111.5 .45311.7 .46112.0 .47212.5 .49212.7 .500
Millimeter Decimal
13.0 .51213.1 .51613.2 .52013.5 .53114.0 .55114.5 .57114.7 .57915.0 .59115.5 .61015.9 .62616.0 .63016.3 .64216.5 .65016.7 .65717.0 .66917.5 .68918.0 .70918.3 .72018.5 .72818.7 .73619.0 .74819.5 .76820.0 .78720.2 .79520.5 .80721.0 .82721.5 .84622.0 .86622.5 .88623.0 .90623.5 .92523.8 .93724.0 .94524.5 .96525.0 .98425.4 1.00027 1.063
Engineering Conversion Chart
vPlease see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Electro Galvanized and Black Steel–Options
Air Spacer Top Options
Aluminum–Options
“Zippered” Laser-Welded Top (Standard Order)
Perforated Laser-Welded Top (Optional) Please specify option when ordering.
“Zippered” Laser-Welded Top (Standard Order)
Perforated Laser-Welded Top (Optional) Please specify option when ordering.
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
vi
Standard Color Selection Chart
Gray 81 .0185 • • •
Golden Oak 339 .016 • •
Dark Brown 126 .016, .0185 • • • •
Beige 70 .0185 • •
Almond Wood 78 .0185 • •
Dusty Grey 338 .016 •
Check with your Customer Service Representative or Sales Representative on Tutone and Custom Colors for Contour and Flat Muntin Bar.
This is a complete list of colors available. Colors and Gauges are subject to change without notice.
* Some color samples may not be represented in the color samples section of this catalog.† Colors with gloss levels up to 25° are approved for Heat Mirror I.G. units by Southwall Technologies.
Color Name Number Gauge Screen ChannelFlat Muntin Bar &Contoured Muntin
Bar 8 x 25mm
Contoured Muntin Bar5.5 x 18mm, 8 x 18mm
8 x 18mm & 5.5 x 25mmAir Spacer
†Approved forHeat Mirror
White 50 .016, .0185, .0215, .024 • • •
H.G. Cameo White 75 .0185 • •
White-HM 45 .0185 • • •
Tan 71 .016, .0185, .024 • • • •
Sandtone-A 104 .016, .0185, .0215 • • •
Champagne 80 .016, .0185, .024 • • •
Canvas 150 .016 •
Fawn 172 .0185 • •
Desert Sand II 182 .0185 • •
Boulder Tan 192 .016 •
Earthtone 72 .016, .0185 • • •Terratone -A 103 .016, .0185, .024 • • • •
Chestnut 94 .016, .0185 • • • •
Bronze 60 .0185, .024 • • •Bronze-H 61 • • • •.016, .0185, .024Bronze-J 62 .0185 • •
Bronze-R 64 .0185 • •
Black 77 .0185 • •Green 39 .016, .0185 • • • •
Brick Red 120 .0185 • •
Light Oak 34 .016, .0185 • • • •Dark Oak 35 .016, .0185 • • • •
Amber Oak 110 .016 • •Cherry Oak 122 .016 • •
Grey Anodized 12 .014, .016 • • •Clear Anodized 10 .010, .014, .016, .020 • • • •
Mill Finish 30 .016, .0185, .024 • • • •Light Bronze Color-InTM 21 .014, .016 • • •Dark Bronze Color-InTM 20 .014, .016 • • •
Black Color-InTM 27 .014, .016 • • •E-Gold Color-InTM 23 .014, .016 • • •
Bright Gold 24 .016 • • •Hi-Q Steel 11 .008, .012 • •Black Steel 17 .015 • •
Bright White 51 .016, .0185, .024 • • •Nova White 52 .016, .0185 • • •
Porsche White 76 .016, .0185 • • •
White -96 57 .016, .0185 • • •
Tan-M 261 .0185 • • •
American Clay 173 .0185 • •
_intro index_Q7_MAC.qxp: intro index.qxd 3/17/11 3:10 PM Page vi
viiPlease see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Locations and Contact Information
Eastern3601 Kennedy RoadSouth Plainfield, NJ 070801-800-222-0549(908) 769-5500Fax: (908) 769-5525
Midwest636 Thomas DriveBensenville, IL 601061-800-323-8202(630) 766-8500Fax: (630) 766-1082
Western1301 East Glendale AvenueSparks, NV 894311-800-824-1372(775) 358-6448Fax: (775) 358-1674
Southeast128 Coleman Blvd.Savannah, GA 31408-95401-800-237-7432(912) 748-5552Fax: (912) 748-4482
Southwest1413 Bradley LaneCarrollton, TX 750071-800-527-7529(972) 245-9264Fax: (972) 245-5281
EuropeanJunkersstr. 804509 WiedemarGermany+49 (0) 34207 - 407 0Fax: +49 (0) 34207 - 407 [email protected]
International Sales DivisionOne Pierce Place, Suite 900Itasca, IL 601431-800-638-2599(630) 250-8090Fax: (630) 250-8387
Corporate HeadquartersOne Pierce Place, Suite 900Itasca, IL 601431-800-638-2599(630) 250-8090Fax: (630) 250-8387
Injection Molding Division224-230 Foster AvenueBensenville, IL 60106(630) 766-1408Fax: (630) 766-3180
Tooling & Design Division377 Balm CourtWooddale, IL 60191(630) 350-2524Fax: (630) 350-0278
www.allmetalinc.comGeneral Information
www.allmetaldirect.comOnline Ordering
email: [email protected]
Requests for special handling, pricing, technical literature, catalogs or other data should be directed to yourlocal plant or sales representative.
viii Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Terms & Conditions of Sale
Terms of SalesDomestic1% cash discount allowed forpayment within 10 days ofinvoice date. Net cash, 30 days.Acceptance and terms of allorders subject to approval of ourcredit department.
ForeignCash in full, in advance, forwhich a 1% discount will beallowed on value of merchandise,irrevocable letter of credit or,upon approval from our creditdepartment, cash on documentsor open account.
Quotations and PricesDomesticQuotations are based on currentmarket prices and, unlessotherwise stated, are valid foracceptance within 30 days ofquotation. Prices subject tochange without notice.
ForeignQuotations are based on currentmarket prices and, unlessotherwise stated, are valid foracceptance within 30 days ofquotation. Prices subject tochange without notice. Allpayments to be made in U.S.dollars, unless otherwise agreedupon. Shipments to foreignlocations outside the U.S. areF.O.B., Allmetal plant dock. Allfreight, insurance and containercharges are for the account offoreign consignee.
No ChargeFor imprinting name,certification number and date.Month, quarter, semi-annual andannual dating available. Specifyimprint desired when ordering.
Cut to LengthAll aluminum air spacerproducts are available cut to length upon request. Moststeel products are not availablecut to length. No cut lengthsbelow 5" are available. Any cut tolength order less than 12" will bebilled as 12". Please specifyrequirements when ordering.Contact Allmetal for details on this service.
FreightPre-paid on 50,000 or more linealfeet of air spacer, assorted sizes,for shipment at one time to onedestination. Freight prepaid oncorner keys shipped with 50,000or more lineal feet of air spacer,assorted sizes.On shipments of corner keys,muntin bar, muntin bar keepers,muntin locators, starbursts, screenbar and screen corners or clipsonly, or with less than 50,000lineal feet of air spacer, freight isF.O.B., Allmetal plant dock.
Deductions for Customer Pick-up• $1.50 per 1,000 lineal feet of
air spacer• $1.50 per 1,000 lineal feet of
screen frame • $ .15 per 1,000 pieces of corner
keys, connectors, keepers,locators, starbursts and clips.
• $ .50 per 1,000 lineal feet ofmuntin bar
ShipmentsUnless otherwise specified, allorders will be processed forshipment in the minimumpossible production time. If youhave an urgent requirement, stateyour needs when ordering, sospecial attention may be given tomeet your needs.
ClaimsAll claims for adjustments orshortages must be reported toour office within fifteen (15) days of invoice date. Claims fordefective material must be madewithin thirty (30) days ofshipment.
Returned GoodsNo returned goods will beaccepted unless return isauthorized by Allmetal. In someinstances, a 20% re-stockingcharge may be imposed.
WarrantyThe seller hereby expresslydisclaims all warranties eitherexpress or implied, including any implied warranty ofmerchantability or fitness for aparticular purpose. Products aresold “as is” and on the conditionthat the purchasers shall maketheir own tests to determine themerchantability of such productsand their fitness for anyparticular purpose. The liabilityof Allmetal, Inc. for special,indirect or consequentialdamages for injury to a propertyfor any reason or for any otherloss resulting from a productdefect or failure shall be limited tothe purchase price of the product.
A I R S P A C E RS E C T I O N C O N T E N T S
Standard Air Spacer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-1Standard Air Spacer w/ Cups . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-13Rectangular Air Spacer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-21Trimline Air Spacer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-29Trimline LP250 Air Spacer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-37Trimline Butyl Bead Air Spacer . . . . . . . . . . . . . . . . . . . . . . . . . . .A-43Trimline .208 High Air Spacer . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-49LPD Air Spacer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-55LPD SW (Straight Wall) Air Spacer . . . . . . . . . . . . . . . . . . . . . . . .A-65LPX Air Spacer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-75LPX Air Spacer w/ Cups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-83LPXC Air Spacer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-89LPXC Air Spacer w/ Cups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-95250P Air Spacer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-101Butyl Bead Air Spacer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-113DLS Air Spacer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-119
S T A N D A R D A I R S P A C E RA N D A V A I L A B L E K E Y S
A N D C O N N E C T O R S
Standard Air Spacer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-2Standard Air Spacer Specifications . . . . . . . . . . . . . . . . . . . . . . . . .A-3Standard Air Spacer Key Availability . . . . . . . . . . . . . . . . . . . . . . .A-4Standard Aluminum Air Spacer Fractional . . . . . . . . . . . . . . . . . .A-5Standard Aluminum Air Spacer Millimeter . . . . . . . . . . . . . . . . . .A-6Standard Steel Air Spacer Fractional . . . . . . . . . . . . . . . . . . . . . . . .A-7Standard Steel Air Spacer Millimeter . . . . . . . . . . . . . . . . . . . . . . .A-8Standard Steel Hi-Q Air Spacer Fractional (.008) . . . . . . . . . . . . .A-9Standard Steel Hi-Q in Air Spacer Fractional (.012) . . . . . . . . . . .A-10Standard Steel Hi-Q Air Spacer Millimeter (.012) . . . . . . . . . . . . .A-11
A 1
A 2
Standard Air Spacer
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
B
.0320.81
.0180.46
IN MM IN MM IN MM.008" [.20mm] Hi-Q Steel .305 7.75 .185 4.70 .008 .20.010" [.25mm] Anodized Aluminum .308 7.82 .188 4.78 .010 .25.012" [.30mm] Hi-Q Steel .310 7.87 .190 4.83 .012 .30.014" [.36mm] Anodized Aluminum .311 7.90 .191 4.85 .014 .36
H Hs TMaterial
4 PLCS
Zippered(all sizes)
R .0050.13
4 PLCS9˚
A
CoinedSerrations(optional)
R +T.010[.25]
T
Notes:1. Dimensions are in decimal inches; dimensions in [] brackets are in mm.2. Available with serrations at no extra charge on inside of Aluminum spacer at
3. 5/32 size currently available in Black Steel only.4. Material tolerances can befound on Material Specifications Data page (ii).5. Thermal properties can be found on Thermal Performance Data page (iii).
location indicated above; not recommended for spacer to be used for bending.
R .0050.13
R +T.010[.25]
B9˚
AA/6
HsH
.0320.81
.0180.46
T 2*T
4 PLCS
4 PLCS
Perforated(1/4" [6.5mm] and wider)
CoinedSerrations(optional)
Tolerance: All dimensions .005 [.13 mm] unless otherwise specified.
.015" [.38mm] Black Steel .315 8.00 .195 4.95 .015 .38
.016" [.41mm] Anodized Aluminum .315 8.00 .195 4.95 .016 .41
.016" [.41mm] Mill Finish Aluminum .316 8.03 .196 4.98 .016 .41
.020" [.47mm] Anodized Aluminum .320 8.13 .200 5.08 .0185 .47
5/32 .156 .0963/16 .188 .0887/32 .219 .1191/4 .250 .150
17/64 .266 .1669/32 .281 .18119/64 .297 .1975/16 .313 .21311/32 .344 .24423/64 .359 .2593/8 .375 .275
13/32 .406 .3067/16 .438 .33815/32 .469 .3691/2 .500 .400
17/32 .531 .4319/16 .563 .46319/32 .594 .4945/8 .625 .525
21/32 .656 .55611/16 .688 .58823/32 .719 .6193/4 .750 .650
25/32 .781 .68113/16 .813 .71327/32 .844 .7447/8 .875 .775
Air SpacerWidth
Fractional
Decimal Equivalent
A B
Air SpacerWidth
Millimeter
Decimal Equivalent
A B
A 3
Standard Air Spacer Specifications
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
5 .197 .0975.5 .217 .1176 .236 .1367 .276 .176
7.5 .295 .1958 .315 .2159 .354 .25410 .394 .29411 .433 .333
11.5 .453 .35312 .472 .37213 .512 .412
13.2 .520 .42014 .551 .45115 .591 .491
15.5 .610 .51016 .630 .53017 .669 .569
17.5 .689 .58918 .709 .609
18.5 .728 .62819 .748 .64820 .787 .68722 .866 .766
A 4
Standard Air Spacer Key Availability
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
B–Standard Fixed w/ FinA–Standard Fixed w/ Hook C–Standard Folding
D–Standard Ultra-Loc WA E–Standard Ultra-Loc BI
G–MP Flex w/ Fin
F–MP Flex w/ Hook
I–MP Straight Connector PDH–MP Straight Connector
J–Kronenberg Connector
A 5
Standard Air SpacerAluminum: Clear Anodized, Color In™ Anodized & Mill Finish
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Air Spacer WidthFractional
Pieces PerShipping Carton Key Availability
12'8"Lengths
Cut ToLength
Lineal Feet Per Shipping
Carton 12'8" Lengths A B C D E F G H I J
5/32 500 TBA 6333 ■
3/16 500 500 6333 ■ ■ ■ ■ ■ ■ ■ ■ ■
7/32 400 400 5067 ■ ■ ■ ■ ■ ■ ■ ■
1/4 350 1000 4333 ■ ■ ■ ■ ■ ■ ■ ■ ■
17/64 325 950 4117 ■ ■ ■ ■ ■ ■ ■
9/32 300 900 3800 ■ ■ ■ ■ ■ ■ ■ ■
19/64 250 800 3167 ■ ■ ■ ■ ■ ■ ■
5/16 250 800 3167 ■ ■ ■ ■ ■ ■ ■ ■ ■
11/32 250 700 3167 ■ ■ ■ ■ ■ ■ ■ ■
23/64 225 700 2850 ■ ■ ■ ■ ■ ■ ■ ■
3/8 200 650 2533 ■ ■ ■ ■ ■ ■ ■ ■ ■
13/32 200 600 2533 ■ ■ ■ ■ ■ ■ ■ ■
7/16 175 500 2217 ■ ■ ■ ■ ■ ■ ■ ■ ■
15/32 175 500 2217 ■ ■ ■ ■ ■ ■ ■ ■
1/2 175 500 2217 ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
17/32 160 450 2027 ■ ■ ■ ■ ■ ■ ■ ■
9/16 150 400 1900 ■ ■ ■ ■ ■ ■ ■ ■ ■
19/32 140 375 1773 ■ ■ ■ ■ ■ ■ ■
5/8 130 350 1647 ■ ■ ■ ■ ■ ■ ■ ■ ■
21/32 130 350 1647 ■ ■ ■ ■ ■ ■ ■
11/16 120 325 1520 ■ ■ ■ ■ ■ ■ ■ ■ ■
23/32 110 300 1393 ■ ■ ■ ■ ■ ■ ■
3/4 100 300 1267 ■ ■ ■ ■ ■ ■ ■ ■ ■
25/32 100 TBA 1267 ■ ■ ■ ■ ■ ■ ■
13/16 100 300 1267 ■ ■ ■ ■ ■ ■ ■
27/32 100 TBA 1267 ■ ■ ■
7/8 75 275 950 ■ ■ ■ ■ ■ ■
Available with pre-inserted connectors for bending equipment on request.
A 6
Standard Air SpacerAluminum: Clear Anodized, Color In™ Anodized & Mill Finish
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Air Spacer WidthMillimeter
Pieces PerShipping Carton Key Availability
12'8"Lengths
Cut ToLength
Lineal Feet Per Shipping
Carton 12'8" Lengths A B C D E F G H I J
5 450 450 5700 ■ ■ ■ ■ ■ ■ ■ ■ ■
5.5 400 400 5067 ■ ■ ■ ■ ■ ■ ■ ■
6 350 1000 4433 ■ ■ ■ ■ ■ ■ ■ ■
7 250 800 3167 ■ ■ ■ ■ ■ ■ ■ ■
7.5 250 800 3167 ■ ■ ■ ■ ■ ■ ■
8 250 800 3167 ■ ■ ■ ■ ■ ■ ■ ■ ■
9 250 700 3167 ■ ■ ■ ■ ■ ■ ■ ■
10 190 600 2407 ■ ■ ■ ■ ■
11 175 500 2217 ■ ■ ■ ■ ■ ■ ■ ■ ■
11.5 175 500 2217 ■ ■ ■ ■ ■
12 175 500 2217 ■ ■ ■ ■ ■ ■ ■ ■
13 170 450 2153 ■ ■ ■ ■ ■ ■ ■ ■ ■
13.2 165 425 2090 ■
14 150 400 1900 ■ ■ ■ ■ ■ ■ ■ ■ ■
15 140 375 1773 ■ ■ ■ ■ ■ ■ ■
15.5 130 350 1647 ■ ■ ■ ■ ■ ■ ■ ■ ■
16 130 350 1647 ■ ■ ■ ■ ■ ■ ■ ■ ■
17 130 350 1647 ■ ■ ■ ■ ■
18 120 300 1520 ■ ■ ■ ■
18.5 120 300 1520 ■ ■ ■ ■ ■ ■ ■
19 100 300 1267 ■ ■ ■ ■ ■ ■ ■ ■ ■
20 100 300 1267 ■ ■ ■ ■ ■ ■ ■
22 75 275 950 ■ ■ ■ ■ ■ ■
Available with pre-inserted connectors for bending equipment on request.
A 7
Standard Air SpacerSteel: Electro Galvanized and Black
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
3/16 200 2533 ■ ■ ■ ■ ■ ■ ■ ■ ■
7/32 200 2533 ■ ■ ■ ■ ■ ■ ■ ■
1/4 175 2217 ■ ■ ■ ■ ■ ■ ■ ■ ■
17/64 160 2027 ■ ■ ■ ■ ■ ■ ■
9/32 125 1583 ■ ■ ■ ■ ■ ■ ■ ■
19/64 125 1583 ■ ■ ■ ■ ■ ■ ■
5/16 125 1583 ■ ■ ■ ■ ■ ■ ■ ■ ■
11/32 100 1267 ■ ■ ■ ■ ■ ■ ■ ■
23/64 100 1267 ■ ■ ■ ■ ■ ■ ■ ■
3/8 100 1267 ■ ■ ■ ■ ■ ■ ■ ■ ■
13/32 100 1267 ■ ■ ■ ■ ■ ■ ■ ■
7/16 100 1267 ■ ■ ■ ■ ■ ■ ■ ■ ■
15/32 100 1267 ■ ■ ■ ■ ■ ■ ■ ■
25/64 100 1267 ■ ■ ■ ■ ■
1/2 90 1140 ■ ■ ■ ■ ■ ■ ■ ■ ■
17/32 80 1013 ■ ■ ■ ■ ■ ■ ■ ■
9/16 85 1077 ■ ■ ■ ■ ■ ■ ■ ■ ■
19/32 85 1077 ■ ■ ■ ■ ■ ■ ■
5/8 75 950 ■ ■ ■ ■ ■ ■ ■ ■ ■
21/32 65 823 ■ ■ ■ ■ ■ ■ ■
11/16 65 823 ■ ■ ■ ■ ■ ■ ■ ■ ■
23/32 55 697 ■ ■ ■ ■ ■ ■ ■
3/4 50 633 ■ ■ ■ ■ ■ ■ ■ ■ ■
13/16 50 633 ■ ■ ■ ■ ■ ■ ■
7/8 50 633 ■ ■ ■ ■ ■
Key Availability
A B C D E F G H IAir Spacer Width
Fractional
Pieces PerShipping Carton
12'8"Lengths
Lineal Feet Per Shipping
Carton12'8" Lengths
Available with pre-inserted connectors for bending equipment on request.
A 8
Standard Air SpacerSteel: Electro Galvanized and Black
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
5 225 2850 ■ ■ ■ ■ ■ ■ ■ ■ ■
6 175 2217 ■ ■ ■ ■ ■ ■ ■ ■
7 125 1583 ■ ■ ■ ■ ■ ■ ■ ■
7.5 125 1583 ■ ■ ■ ■ ■ ■ ■
8 125 1583 ■ ■ ■ ■ ■ ■ ■ ■ ■
9 100 1267 ■ ■ ■ ■ ■ ■ ■ ■
10 95 1204 ■ ■ ■ ■ ■
11 90 1140 ■ ■ ■ ■ ■ ■ ■ ■ ■
11.5 90 1140 ■ ■ ■ ■ ■
12 90 1140 ■ ■ ■ ■ ■ ■ ■ ■
13 85 1077 ■ ■ ■ ■ ■ ■ ■ ■ ■
13.2 85 1077 ■
14 85 1077 ■ ■ ■ ■ ■ ■ ■ ■ ■
15 75 950 ■ ■ ■ ■ ■ ■ ■
15.5 75 950 ■ ■ ■ ■ ■ ■ ■ ■
16 75 950 ■ ■ ■ ■ ■ ■ ■ ■ ■
17 65 823 ■ ■ ■ ■ ■
17.5 60 760 ■ ■ ■ ■ ■ ■ ■ ■ ■
18 60 760 ■ ■ ■ ■
18.5 60 760 ■ ■ ■ ■ ■ ■ ■
19 50 633 ■ ■ ■ ■ ■ ■ ■ ■ ■
20 50 633 ■ ■ ■ ■ ■ ■ ■
22 50 633 ■ ■ ■ ■ ■
Key Availability
A B C D E F G H I JAir Spacer Width
Millimeter
Pieces PerShipping Carton
12'8"Lengths
Lineal Feet Per Shipping
Carton 12'8" Lengths
Available with pre-inserted connectors for bending equipment on request.
A 9
Standard Air SpacerSteel: Hi Q in .008
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Key Availability
A B C D E F G H I
5/8 130 1647 ■ ■ ■ ■ ■ ■ ■ ■ ■
3/4 100 1267 ■ ■ ■ ■ ■ ■ ■ ■ ■
Air Spacer WidthFractional
Pieces PerShipping Carton
12'8" Lengths
Lineal Feet Per Shipping
Carton 12'8" Lengths
Available with pre-inserted connectors for bending equipment on request.
A 10
Standard Air SpacerSteel: Hi Q in .012
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Air Spacer WidthFractional
Key AvailabilityLineal Feet Per Shipping
Carton 12'8" Lengths A B C D E F G H I
1/4 175 2217 ■ ■ ■ ■ ■ ■ ■ ■ ■
5/16 125 1583 ■ ■ ■ ■ ■ ■ ■ ■ ■
3/8 100 1267 ■ ■ ■ ■ ■ ■ ■ ■ ■
7/16 100 1267 ■ ■ ■ ■ ■ ■ ■ ■ ■
1/2 90 1140 ■ ■ ■ ■ ■ ■ ■ ■ ■
9/16 85 1077 ■ ■ ■ ■ ■ ■ ■ ■ ■
5/8 75 950 ■ ■ ■ ■ ■ ■ ■ ■ ■
11/16 65 823 ■ ■ ■ ■ ■ ■ ■ ■ ■
3/4 50 633 ■ ■ ■ ■ ■ ■ ■ ■ ■
Pieces PerShipping Carton
12'8" Lengths
Available with pre-inserted connectors for bending equipment on request.
A 11Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Air Spacer WidthMillimeter
Key AvailabilityLineal Feet Per Shipping
Carton 12'8" Lengths A B C D E F G H I
5 225 2850 ■ ■ ■ ■ ■ ■ ■ ■ ■
6 175 2217 ■ ■ ■ ■ ■ ■ ■ ■
12 90 1140 ■ ■ ■ ■ ■ ■ ■ ■
Pieces PerShipping Carton
12'8" Lengths
Standard Air SpacerSteel: Hi Q in .012
Available with pre-inserted connectors for bending equipment on request.
S T A N D A R D A I R S P A C E R w / C U P S
A N D A V A I L A B L E K E Y SA N D C O N N E C T O R S
Standard Air Spacer w/Cups . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-14Standard Air Spacer w/Cups Specifications . . . . . . . . . . . . . . . .A-15Standard Air Spacer w/Cups Key Availability . . . . . . . . . . . . . .A-16Standard Aluminum Air Spacer w/Cups Fractional . . . . . . . . .A-17Standard Aluminum Air Spacer w/Cups Millimeter . . . . . . . . .A-18Standard Steel Air Spacer w/Cups Fractional . . . . . . . . . . . . . . .A-19Standard Steel Air Spacer w/Cups Millimeter . . . . . . . . . . . . . .A-20
A 13
A 14
Standard Air Spacer w/ Cups
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
IN MM IN MM IN MM.008" [.20mm] Hi-Q Steel .305 7.75 .185 4.70 .008 .20.010" [.25mm] Anodized Aluminum .305 7.75 .185 4.70 .010 .25.014" [.36mm] Anodized Aluminum .311 7.90 .191 4.85 .014 .36.014" [.36mm] EG Steel .311 7.90 .191 4.85 .014 .36.015" [.38mm] Black Steel .315 8.00 .195 4.95 .015 .38.016" [.41mm] Anodized Aluminum .315 8.00 .195 4.95 .016 .41.016" [.41mm] Mill Finish Aluminum .316 8.03 .196 4.98 .016 .41.0185" [.47mm] Anodized Aluminum .320 8.13 .200 5.08 .0185 .47
H Hs TMaterial
A
B
HsH
R +T .010 [.25]4 PLCS
R .0050.13
4 PLCS
Zippered(all sizes)
.0320.81.0180.46
.0080.20
CoinedSerrations(optional)
T CoinedSerrations(optional)
R .0050.13
4 PLCS
R +T .010 [.25]
Perforated(1/4" [6.5mm] and wider)
HsH
A
.0180.46
.0320.81
B
4 PLCSA/6.008
0.20
2*TT
Notes:1. Dimensions are in decimal inches; dimensions in [] brackets are in mm.2. Available with serrations at no extra charge on inside of Aluminum spacer at
3. Material tolerances can be found on Material Specifications Data page (ii).4. Thermal properties can be found on Thermal Performance Data page (iii).
location indicated above; not recommended for spacer to be used for bending.
Tolerance: All dimensions .005 [.13 mm] unless otherwise specified.
9° 9°
A 15
Standard Air Spacer w/ Cups SpecificationsAluminum: Clear Anodized, Color In™ Anodized & Mill Finish
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
7/32 .219 .1191/4 .250 .150
17/64 .266 .1669/32 .281 .18119/64 .297 .1975/16 .313 .21311/32 .344 .24423/64 .359 .2593/8 .375 .275
13/32 .406 .3067/16 .438 .33815/32 .469 .3691/2 .500 .400
17/32 .531 .4319/16 .563 .46319/32 .594 .4945/8 .625 .525
21/32 .656 .55611/16 .688 .58823/32 .719 .6193/4 .750 .650
25/32 .781 .68113/16 .813 .71327/32 .844 .7447/8 .875 .775
6 .236 .1367 .276 .176
7.5 .295 .1958 .315 .2159 .354 .25410 .394 .29411 .433 .333
11.5 .453 .35312 .472 .37213 .512 .412
13.2 .520 .42014 .551 .45115 .591 .491
15.5 .610 .51016 .630 .53017 .669 .569
17.5 .689 .58918 .709 .609
18.5 .728 .62819 .748 .64820 .787 .68722 .866 .766
Air SpacerWidth
Fractional
Decimal Equivalent
A B
Air SpacerWidth
Millimeter
Decimal Equivalent
A B
A 16
Standard Air Spacer w/ Cups Key Availability
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
B–Standard Fixed w/ FinA–Standard Fixed w/ Hook C–Standard Folding
D–Standard Ultra-Loc WA E–Standard Ultra-Loc BI
G–MP Flex w/ Fin
F–MP Flex w/ Hook
I–MP Straight Connector PDH–MP Straight Connector
A 17
Standard Air Spacer w/ CupsAluminum: Clear Anodized, Color In™ Anodized & Mill Finish
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Air Spacer WidthFractional
Pieces PerShipping Carton Key Availability
12'8"Lengths
Cut ToLength
Lineal Feet Per Shipping
Carton 12'8" Lengths A B C D E F G H I
7/32 400 400 5067 ■ ■ ■ ■ ■ ■ ■ ■
1/4 350 1000 4433 ■ ■ ■ ■ ■ ■ ■ ■ ■
17/64 325 950 4117 ■ ■ ■ ■ ■ ■ ■
9/32 300 900 3800 ■ ■ ■ ■ ■ ■ ■ ■
19/64 250 800 3167 ■ ■ ■ ■ ■ ■ ■
5/16 250 800 3167 ■ ■ ■ ■ ■ ■ ■ ■ ■
11/32 250 700 3167 ■ ■ ■ ■ ■ ■ ■ ■
23/64 225 700 2850 ■ ■ ■ ■ ■ ■ ■ ■
3/8 200 650 2533 ■ ■ ■ ■ ■ ■ ■ ■ ■
13/32 200 600 2533 ■ ■ ■ ■ ■ ■ ■ ■
7/16 175 500 2217 ■ ■ ■ ■ ■ ■ ■ ■ ■
15/32 175 500 2217 ■ ■ ■ ■ ■ ■ ■ ■
1/2 175 500 2217 ■ ■ ■ ■ ■ ■ ■ ■ ■
17/32 160 450 2027 ■ ■ ■ ■ ■ ■ ■ ■
9/16 150 400 1900 ■ ■ ■ ■ ■ ■ ■ ■ ■
19/32 140 375 1773 ■ ■ ■ ■ ■ ■ ■
5/8 130 350 1647 ■ ■ ■ ■ ■ ■ ■ ■ ■
21/32 130 350 1647 ■ ■ ■ ■ ■ ■ ■
11/16 120 325 1520 ■ ■ ■ ■ ■ ■ ■ ■ ■
23/32 110 300 1393 ■ ■ ■ ■ ■ ■ ■
3/4 100 300 1267 ■ ■ ■ ■ ■ ■ ■ ■ ■
25/32 100 TBA 1267 ■ ■ ■ ■ ■ ■ ■
13/16 100 300 1267 ■ ■ ■ ■ ■ ■ ■
27/32 100 TBA 1267 ■ ■ ■
7/8 75 275 950 ■ ■ ■ ■ ■
Available with pre-inserted connectors for bending equipment on request.
A 18
Standard Air Spacer w/ CupsAluminum: Clear Anodized, Color In™ Anodized & Mill Finish
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
6 350 1000 4433 ■ ■ ■ ■ ■ ■ ■ ■
7 250 800 3167 ■ ■ ■ ■ ■ ■ ■ ■
7.5 250 800 3167 ■ ■ ■ ■ ■ ■ ■
8 250 800 3167 ■ ■ ■ ■ ■ ■ ■ ■ ■
9 250 700 3167 ■ ■ ■ ■ ■ ■ ■ ■
10 190 600 2407 ■ ■ ■ ■ ■
11 175 500 2217 ■ ■ ■ ■ ■ ■ ■ ■ ■
11.5 175 500 2217 ■ ■ ■ ■ ■
12 175 500 2217 ■ ■ ■ ■ ■ ■ ■ ■
13 170 450 2153 ■ ■ ■ ■ ■ ■ ■ ■ ■
14 150 400 1900 ■ ■ ■ ■ ■ ■ ■ ■ ■
15 140 375 1773 ■ ■ ■ ■ ■ ■ ■
15.5 130 350 1647 ■ ■ ■ ■ ■ ■ ■ ■
16 130 350 1647 ■ ■ ■ ■ ■ ■ ■ ■ ■
17 130 350 1647 ■ ■ ■ ■ ■
18 120 300 1520 ■ ■ ■ ■
18.5 120 300 1520 ■ ■ ■ ■ ■ ■ ■
19 100 300 1267 ■ ■ ■ ■ ■ ■ ■ ■ ■
20 100 300 1267 ■ ■ ■ ■ ■ ■ ■
22 75 275 950 ■ ■ ■ ■ ■
Air Spacer WidthMillimeter
Pieces PerShipping Carton Key Availability
12'8"Lengths
Cut ToLength
Lineal Feet Per Shipping
Carton 12'8" Lengths A B C D E F G H I
Available with pre-inserted connectors for bending equipment on request.
A 19
Standard Air Spacer w/ CupsSteel: Electro Galvanized and Black
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Also available in Hi-Q Steel upon request.
7/32 200 2533 ■ ■ ■ ■ ■ ■ ■ ■
1/4 175 2217 ■ ■ ■ ■ ■ ■ ■ ■ ■
17/64 160 2027 ■ ■ ■ ■ ■ ■ ■
9/32 125 1583 ■ ■ ■ ■ ■ ■ ■ ■
19/64 125 1583 ■ ■ ■ ■ ■ ■ ■
5/16 125 1583 ■ ■ ■ ■ ■ ■ ■ ■ ■
11/32 100 1267 ■ ■ ■ ■ ■ ■ ■ ■
23/64 100 1267 ■ ■ ■ ■ ■ ■ ■ ■
3/8 100 1267 ■ ■ ■ ■ ■ ■ ■ ■ ■
13/32 100 1267 ■ ■ ■ ■ ■ ■ ■ ■
7/16 100 1267 ■ ■ ■ ■ ■ ■ ■ ■ ■
15/32 100 1267 ■ ■ ■ ■ ■ ■ ■ ■
1/2 90 1140 ■ ■ ■ ■ ■ ■ ■ ■ ■
17/32 80 1013 ■ ■ ■ ■ ■ ■ ■ ■
9/16 85 1077 ■ ■ ■ ■ ■ ■ ■ ■ ■
5/8 75 950 ■ ■ ■ ■ ■ ■ ■ ■ ■
21/32 65 823 ■ ■ ■ ■ ■ ■ ■
11/16 65 823 ■ ■ ■ ■ ■ ■ ■ ■ ■
23/32 55 697 ■ ■ ■ ■ ■ ■ ■
3/4 50 633 ■ ■ ■ ■ ■ ■ ■ ■ ■
25/32 TBA TBA ■ ■ ■ ■ ■ ■ ■
13/16 50 633 ■ ■ ■ ■ ■ ■ ■
27/32 TBA TBA ■ ■ ■
7/8 50 633 ■ ■ ■ ■ ■
Key Availability
A B C D E F G H IAir Spacer Width
Fractional
Pieces PerShipping Carton
12'8"Lengths
Lineal Feet Per Shipping
Carton 12'8" Lengths
Available with pre-inserted connectors for bending equipment on request.
A 20 Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Standard Air Spacer w/ CupsSteel: Electro Galvanized and Black
6 175 2217 ■ ■ ■ ■ ■ ■ ■ ■
7 125 1583 ■ ■ ■ ■ ■ ■ ■ ■
7.5 125 1583 ■ ■ ■ ■ ■ ■ ■
8 125 1583 ■ ■ ■ ■ ■ ■ ■ ■ ■
9 100 1267 ■ ■ ■ ■ ■ ■ ■ ■
10 95 1203 ■ ■ ■ ■ ■
11 90 1140 ■ ■ ■ ■ ■ ■ ■ ■ ■
11.5 90 1140 ■ ■ ■ ■ ■
12 90 1140 ■ ■ ■ ■ ■ ■ ■ ■
13 85 1077 ■ ■ ■ ■ ■ ■ ■ ■ ■
14 85 1077 ■ ■ ■ ■ ■ ■ ■ ■ ■
15 75 950 ■ ■ ■ ■ ■ ■ ■
15.5 75 950 ■ ■ ■ ■ ■ ■ ■ ■
16 75 950 ■ ■ ■ ■ ■ ■ ■ ■ ■
17 65 823 ■ ■ ■ ■ ■
17.5 60 760 ■ ■ ■ ■ ■ ■ ■ ■ ■
18 60 760 ■ ■ ■ ■
18.5 60 760 ■ ■ ■ ■ ■ ■ ■
19 50 633 ■ ■ ■ ■ ■ ■ ■ ■ ■
20 50 633 ■ ■ ■ ■ ■ ■ ■
22 50 633 ■ ■ ■ ■ ■
Key Availability
A B C D E F G H IAir Spacer Width
Millimeter
Pieces PerShipping Carton
12'8"Lengths
Lineal Feet Per Shipping
Carton 12'8" Lengths
Also available in Hi-Q Steel upon request.Available with pre-inserted connectors for bending equipment on request.
R E C T A N G U L A R A I R S P A C E RA N D A V A I L A B L E K E Y S
Rectangular Air Spacer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-22Rectangular Air Spacer Specifications . . . . . . . . . . . . . . . . . . . . . .A-23Rectangular Air Spacer Key Availability . . . . . . . . . . . . . . . . . . . .A-24Rectangular Aluminum Air Spacer Fractional . . . . . . . . . . . . . . .A-25Rectangular Aluminum Air Spacer Millimeter . . . . . . . . . . . . . .A-26Rectangular Steel Hi-Q Air Spacer Fractional (.008) . . . . . . . . . .A-27
A 21
A 22
Rectangular Air Spacer
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
B
.0822.08
.0751.90
.0822.08
A
H
R +T .010 [.25]4 PLCS
H
A
B
A/6.0751.90
.0822.08
.0822.08
R +T .010 [.25]4 PLCS
CoinedSerrations(optional)
CoinedSerrations(optional)Zippered
(all sizes) Perforated(1/4" [6.5mm] and wider)
T 2*TT
Notes:1. Dimensions are in decimal inches; dimensions in [] brackets are in mm.2. Available with serrations at no extra charge on inside of Aluminum spacer at
3. Material tolerances can be found on Material Specifications Data page (ii).4. Thermal properties can be found on Thermal Performance Data page (iii).
location indicated above; not recommended for spacer to be used for bending.
IN MM IN MM.008" [.20mm] .302 7.67 .008 .20.012" [.30mm] .307 7.80 .012 .30.014" [.36mm] Anodized Aluminum .311 7.90 .014 .36.016" [.41mm] Anodized Aluminum .315 8.00 .016 .41.016" [.41mm] Mill Finish Aluminum .316 8.03 .016 .41
H TMateria l
Hi- QSteelHi-Q Steel
Tolerance: All dimensions .005 [.13 mm] unless otherwise specified.
A 23
Rectangular Air Spacer Specifications
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
5/32 .156 .1563/16 .188 .1887/32 .219 .2191/4 .250 .250
17/64 .266 .2669/32 .281 .28119/64 .297 .2975/16 .313 .31321/64 .328 .32811/32 .344 .34423/64 .359 .3593/8 .375 .375
25/64 .391 .39113/32 .406 .4067/16 .438 .43829/64 .453 .45315/32 .469 .46931/64 .484 .4841/2 .500 .500
33/64 .516 .51617/32 .531 .53135/64 .547 .5479/16 .563 .56319/32 .594 .59439/64 .609 .6095/8 .625 .625
21/32 .656 .65643/64 .672 .67211/16 .688 .68845/64 .703 .70323/32 .719 .7193/4 .750 .750
25/32 .781 .78113/16 .813 .81327/32 .844 .844
2.8 .110 .1103.5 .138 .1384 .157 .1575 .197 .197
5.5 .217 .2176 .236 .236
6.5 .256 .2567 .276 .276
7.5 .295 .2958 .315 .3159 .354 .354
9.5 .374 .37410 .394 .39411 .433 .433
11.5 .453 .45312 .472 .472
12.5 .492 .49213 .512 .512
13.5 .531 .53114 .551 .551
14.5 .571 .57115 .591 .591
15.5 .610 .61016 .630 .63017 .669 .669
17.5 .689 .68918 .709 .709
18.5 .728 .72819 .748 .74820 .787 .787
20.5 .807 .80721.5 .847 .847
Air SpacerWidth
Fractional
Decimal Equivalent
A B
Air SpacerWidth
Millimeter
Decimal Equivalent
A B
A–24
Rectangular Air Spacer Key Availability
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
B–Rectangular Fixed w/ FinA–Rectangular Fixed w/ Hook
F–MP Flex w/ Fin
C–Rectangular Foldingw/ Fin No Vent
D–Rectangular Folding w/ Fin w/ Vent
E–MP Flex w/ Hook
Vent➝
A 25
Rectangular Air SpacerAluminum: Clear Anodized, Color In™ Anodized & Mill Finish
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Air Spacer WidthFractional
Pieces PerShipping Carton Key Availability
12'8"Lengths
Cut ToLength
Lineal Feet Per Shipping
Carton 12'8" Lengths A B C D E F
5/32 375 375 4750 ■
3/16 375 375 4750 ■ ■ ■ ■ ■
7/32 350 1000 4433 ■ ■ ■ ■ ■
1/4 300 1000 3800 ■ ■ ■ ■ ■ ■
17/64 275 900 3483 ■ ■ ■
9/32 250 800 3167 ■ ■ ■ ■ ■
19/64 250 800 3167 ■ ■ ■ ■
5/16 250 800 3167 ■ ■ ■ ■ ■ ■
21/64 250 TBA 3167 ■ ■
11/32 225 700 2850 ■ ■ ■ ■ ■
23/64 200 700 2533 ■ ■ ■ ■
3/8 200 600 2533 ■ ■ ■ ■ ■ ■
25/64 200 600 2533 ■ ■ ■ ■
13/32 200 600 2533 ■ ■ ■ ■ ■
7/16 175 500 2217 ■ ■ ■ ■ ■ ■
29/64 175 500 2217 ■ ■ ■ ■
15/32 170 500 2153 ■ ■ ■ ■ ■
31/64 170 500 2153 ■ ■ ■ ■
1/2 165 500 2090 ■ ■ ■ ■ ■ ■
33/64 165 500 2090 ■ ■ ■ ■
17/32 150 450 1900 ■ ■ ■ ■ ■
35/64 150 450 1900 ■ ■ ■ ■
9/16 140 375 1773 ■ ■ ■ ■ ■ ■
19/32 130 375 1647 ■ ■ ■ ■
39/64 130 375 1647 ■ ■ ■ ■
5/8 130 350 1647 ■ ■ ■ ■ ■ ■
21/32 120 350 1520 ■ ■ ■ ■
43/64 120 350 1520 ■ ■ ■ ■
11/16 120 350 1520 ■ ■ ■ ■ ■ ■
45/64 120 325 1520 ■ ■ ■ ■
23/32 120 325 1520 ■ ■ ■ ■ ■
3/4 100 300 1267 ■ ■ ■ ■ ■ ■
25/32 100 300 1267 ■ ■ ■ ■ ■
13/16 100 300 1267 ■ ■
27/32 100 300 1267 ■ ■
A 26 Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Air Spacer WidthMillimeter
Pieces PerShipping Carton Key Availability
12'8"Lengths
Cut ToLength
Lineal Feet Per Shipping
Carton 12'8" Lengths A B C D E F
2.8 700 TBA 8867 ■
3.5 550 TBA 6967 ■
4 TBA TBA TBA ■
5 400 400 5067 ■ ■ ■ ■ ■
5.5 375 1000 4750 ■ ■ ■ ■ ■
6 350 1000 4433 ■ ■ ■ ■ ■
6.5 300 200 3800 ■ ■ ■ ■ ■ ■
7 250 800 3167 ■ ■ ■ ■ ■
7.5 250 800 3167 ■ ■ ■ ■
8 250 800 3167 ■ ■ ■ ■ ■ ■
9 250 800 3167 ■ ■ ■ ■ ■
9.5 200 600 2533 ■ ■ ■ ■ ■ ■
10 200 600 2533 ■ ■ ■ ■
11 175 500 2217 ■ ■ ■ ■ ■ ■
11.5 170 500 2153 ■ ■ ■ ■
12 170 500 2153 ■ ■ ■ ■ ■
12.5 165 500 2153 ■ ■ ■ ■
13 165 500 2090 ■ ■ ■ ■ ■ ■
13.5 165 450 2090 ■ ■ ■ ■
14 150 450 1900 ■ ■ ■ ■ ■ ■
14.5 150 450 1647 ■ ■ ■ ■ ■
15 130 450 1647 ■ ■ ■ ■
15.5 130 400 1647 ■ ■ ■ ■
16 130 400 1647 ■ ■ ■ ■ ■ ■
17 130 400 1647 ■ ■ ■ ■
17.5 120 325 1520 ■ ■ ■ ■ ■ ■
18 120 325 1520 ■ ■ ■ ■
18.5 100 300 1267 ■ ■ ■ ■ ■
19 100 300 1267 ■ ■ ■ ■ ■ ■
20 100 300 1267 ■ ■ ■ ■ ■
20.5 75 TBA 950 ■ ■
21.5 75 TBA 950 ■ ■
Rectangular Air SpacerAluminum: Clear Anodized, Color In™ Anodized & Mill Finish
A 27Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Rectangular Air SpacerSteel: Hi Q in .008
Key AvailabilityLineal Feet Per ShippingCarton 12'8"
Lengths A B C D E F
7/32 175 2217 ■ ■ ■ ■ ■
11/32 100 1267 ■ ■ ■ ■ ■
15/32 85 1076 ■ ■ ■ ■ ■
23/32 60 760 ■ ■ ■ ■ ■
Pieces PerShipping Carton
12'8" Lengths
Air Spacer WidthFractional
T R I M L I N E A I R S P A C E RA N D A V A I L A B L E K E Y S
A N D C O N N E C T O R S
Trimline Air Spacer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-30Trimline Air Spacer Specifications . . . . . . . . . . . . . . . . . . . . . . . . .A-31Trimline Air Spacer Key Availability . . . . . . . . . . . . . . . . . . . . . . .A-32Trimline Aluminum Air Spacer Fractional . . . . . . . . . . . . . . . . . .A-33Trimline Aluminum Air Spacer Millimeter . . . . . . . . . . . . . . . . . .A-34Trimline Steel Hi-Q Air Spacer Fractional (.008) . . . . . . . . . . . . .A-35
A 29
Trimline Air Spacer
A 30 Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
IN MM IN MM IN MM.008" [.20mm] Hi-Q Steel .305 7.75 .185 4.70 .008 .20.014" [.36mm] Anodized Aluminum .311 7.90 .191 4.85 .014 .36.016" [.41mm] Anodized Aluminum .315 8.00 .195 4.95 .016 .41
H Hs TMa terial
CoinedSerrations(optional)
CoinedSerrations(optional)
HsH
A
B .0390.99
.0411.04
T
R .0050.13
4 PLCS
R +T .010 [.25]4 PLCS 4 PLCS
R +T .010 [.25]
R .0050.13
4 PLCS
B .0390.99
.0411.04
A
2*TT
Perforated(1/4" [6.5mm] and wider)
Zippered(all sizes)
A/6
Notes:1. Dimensions are in decimal inches; dimensions in [] brackets are in mm.2. Available with serrations at no extra charge on inside of Aluminum spacer at
3. Material tolerances can be found on Material Specifications Data page (ii).4. Thermal properties can be found on Thermal Performance Data page (iii).
location indicated above; not recommended for spacer to be used for bending.
Tolerance: All dimensions .005 [.13 mm] unless otherwise specified.
18° 18°
A 31Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
3/16 .188 .02817/32 .219 .0591/4 .250 .090
17/64 .266 .1069/32 .281 .12119/64 .297 .1375/16 .313 .15311/32 .344 .18423/64 .359 .1993/8 .375 .215
25/64 .391 .23113/32 .406 .2467/16 .438 .27829/64 .453 .29315/32 .469 .30931/64 .484 .3241/2 .500 .340
33/64 .516 .35617/32 .531 .37135/64 .547 .3879/16 .563 .40319/32 .594 .43439/64 .609 .4495/8 .625 .465
21/32 .656 .49643/64 .672 .51211/16 .688 .52845/64 .703 .54323/32 .719 .5593/4 .750 .590
25/32 .781 .62113/16 .813 .65327/32 .844 .6847/8 .875 .715
1 1.000 .8401 1/16 1.062 .902
5 .197 .0375.5 .217 .0576 .236 .076
6.5 .256 .0967 .276 .116
7.5 .295 .1358 .315 .155
8.5 .335 .1759 .354 .194
9.5 .374 .21410 .394 .234
10.5 .413 .25311 .433 .273
11.5 .453 .29312 .472 .312
12.5 .492 .33213 .512 .352
13.2 .520 .36013.5 .531 .37114 .551 .391
14.5 .571 .41115 .591 .431
15.5 .610 .45016 .630 .470
16.5 .650 .49017 .669 .509
17.5 .689 .52918 .709 .549
18.5 .728 .56819 .748 .588
19.5 .768 .60820 .787 .627
20.5 .807 .64721 .827 .66722 .866 .70623 .906 .746
25.4 1.000 .840
Trimline Air Spacer Specifications
Air SpacerWidth
Fractional
Decimal Equivalent
A B
Air SpacerWidth
Millimeter
Decimal Equivalent
A B
A 32
Trimline Air Spacer Key Availability
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
B–Trimline Fixed w/ Fin C–Trimline Ultra-Loc WA
D–Trimline Ultra-Loc BI E–MP Flex w/ Hook F–MP Flex w/ Fin
G–MP Straight Connector H–MP Straight Connector PD
A–Trimline Fixed w/ Hook
A 33Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Air Spacer WidthFractional
Pieces PerShipping Carton Key Availability
12'8"Lengths
Cut ToLength
Lineal Feet Per Shipping
Carton 12'8" Lengths A B C D E F G H
1/4 350 1000 4433 ■ ■ ■ ■ ■ ■ ■ ■
19/64 250 800 3167 ■ ■ ■ ■ ■ ■
5/16 250 800 3167 ■ ■ ■ ■ ■ ■ ■ ■
3/8 200 600 2533 ■ ■ ■ ■ ■ ■ ■ ■
7/16 175 500 2217 ■ ■ ■ ■ ■ ■ ■ ■
1/2 175 500 2217 ■ ■ ■ ■ ■ ■ ■ ■
9/16 160 425 2027 ■ ■ ■ ■ ■ ■ ■ ■
19/32 150 400 1900 ■ ■ ■ ■ ■ ■ ■
5/8 140 375 1773 ■ ■ ■ ■ ■ ■ ■ ■
21/32 140 375 1773 ■ ■ ■ ■ ■ ■ ■
11/16 130 350 1647 ■ ■ ■ ■ ■ ■ ■ ■
3/4 100 300 1267 ■ ■ ■ ■ ■ ■ ■ ■
13/16 100 300 1267 ■ ■ ■ ■ ■ ■
Trimline Air SpacerAluminum: Clear Anodized, Color In™ Anodized & Mill Finish
Available with pre-inserted connectors for bending equipment on request.
A 34 Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Air Spacer WidthMillimeter
Pieces PerShipping Carton Key Availability
12'8"Lengths
Cut ToLength
Lineal Feet Per Shipping
Carton 12'8" Lengths A B C D E F G H
8 250 800 3167 ■ ■ ■ ■ ■ ■ ■ ■
11 175 500 2217 ■ ■ ■ ■ ■ ■ ■ ■
13 175 500 2217 ■ ■ ■ ■ ■ ■ ■ ■
14 170 450 2153 ■ ■ ■ ■ ■ ■ ■
16 150 400 1900 ■ ■ ■ ■ ■ ■ ■ ■
19 100 300 1267 ■ ■ ■ ■ ■ ■ ■ ■
Trimline Air SpacerAluminum: Clear Anodized, Color In™ Anodized & Mill Finish
Available with pre-inserted connectors for bending equipment on request.
Trimline Air SpacerSteel: Hi Q in .008
A 35Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Key AvailabilityLineal Feet Per Shipping
Carton 12'8" Lengths A B C D E F G H
1/2 175 2217 ■ ■ ■ ■ ■ ■ ■ ■
9/16 160 2027 ■ ■ ■ ■ ■ ■ ■ ■
5/8 140 1773 ■ ■ ■ ■ ■ ■ ■ ■
11/16 130 1647 ■ ■ ■ ■ ■ ■ ■ ■
Pieces PerShipping Carton
12'8" Lengths
Air Spacer WidthFractional
Available with pre-inserted connectors for bending equipment on request.
T R I M L I N E L P 2 5 0A I R S P A C E R
A N D A V A I L A B L E K E Y SA N D C O N N E C T O R S
Trimline LP250 Air Spacer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-38Trimline LP250 Air Spacer Specifications . . . . . . . . . . . . . . . . . . .A-39Trimline LP250 Air Spacer Key Availability . . . . . . . . . . . . . . . . .A-40Trimline LP250 Aluminum Air Spacer Fractional . . . . . . . . . . . .A-41Trimline LP250 Aluminum Air Spacer Millimeter . . . . . . . . . . . .A-42
A 37
A 38 Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
IN MM IN MM IN MM.014" [.36mm] Anodized Aluminum .246 6.25 .136 3.45 .014 .36.016" [.41mm] Anodized Aluminum .250 6.35 .140 3.56 .016 .41.016" [.41mm] Mill Finish Aluminum .250 6.35 .140 3.56 .016 .41
H Hs TMa terial
Zippered(all sizes)
Perforated(1/4" [6.5mm] and wider)
HHs
.0380.97
.0320.80B
A
HHs
.0320.80
.0380.97
B
A
R .0050.13
4 PLCS
A/6
2*TT
R .0050.13
4 PLCS
CoinedSerrations(optional)
CoinedSerrations(optional)
T
R +T .010 [.25]4 PLCS
R +T .010 [.25]4 PLCS
Notes:1. Dimensions are in decimal inches; dimensions in [] brackets are in mm.2. Available with serrations at no extra charge on inside of Aluminum spacer at
3. Material tolerances can be found on Material Specifications Data page (ii).4. Thermal properties can be found on Thermal Performance Data page (iii).
location indicated above; not recommended for spacer to be used for bending.
Tolerance: All dimensions .005 [.13 mm] unless otherwise specified.
Trimline LP250 Air Spacer
16° 16°
Trimline LP250 Air Spacer SpecificationsAluminum: Clear Anodized, Color In™ Anodized & Mill Finish
A 39Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
1/4 .250 .1109/32 .281 .1415/16 .313 .1733/8 .375 .2357/16 .438 .29815/32 .469 .3291/2 .500 .3609/16 .563 .4235/8 .625 .485
21/32 .656 .51611/16 .688 .5483/4 .750 .610
8 .315 .1759.5 .374 .23411 .433 .29312 .472 .332
14.5 .571 .43116 .630 .490
17.5 .689 .549
Air SpacerWidth
Fractional
Decimal Equivalent
A B
Air SpacerWidth
Millimeter
Decimal Equivalent
A B
A 40
Trimline LP250 Air Spacer Key Availability
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
A–Trimline LP250 Fixed B–Trimline LP250 Flex C–Trimline LP250 Straight Connector PD
A 41
Air Spacer WidthFractional
Pieces PerShipping Carton Key Availability
12'8"Lengths
Cut ToLength
Lineal Feet Per Shipping
Carton 12'8" Lengths A B C
Trimline LP250 Air SpacerAluminum: Clear Anodized, Color In™ Anodized & Mill Finish
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
1/4 400 1300 5067 ■ ■ ■
9/32 350 TBA 4433 ■ ■
5/16 350 1000 4433 ■ ■ ■
3/8 275 850 3483 ■ ■ ■
7/16 250 750 3167 ■ ■ ■
15/32 225 675 2850 ■ ■
1/2 225 650 2850 ■ ■ ■
9/16 200 550 2533 ■ ■ ■
5/8 175 500 2217 ■ ■ ■
21/32 160 450 2027 ■ ■
11/16 150 425 1900 ■ ■ ■
3/4 140 400 1773 ■ ■ ■
Available with pre-inserted connectors for bending equipment on request.
A 42 Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Air Spacer WidthMillimeter
Pieces PerShipping Carton Key Availability
12'8"Lengths
Cut ToLength
Lineal Feet Per Shipping
Carton 12'8" Lengths A B C
8 350 1000 4433 ■ ■ ■
9.5 275 850 3483 ■ ■ ■
11 250 750 3167 ■ ■ ■
12 225 675 2850 ■ ■
14.5 200 500 2533 ■ ■ ■
16 175 500 2217 ■ ■ ■
17.5 150 475 1900 ■ ■ ■
Trimline LP250 Air SpacerAluminum: Clear Anodized, Color In™ Anodized & Mill Finish
Available with pre-inserted connectors for bending equipment on request.
T R I M L I N E B U T Y L B E A DA I R S P A C E R
A N D A V A I L A B L E K E Y S
Trimline Butyl Bead Air Spacer . . . . . . . . . . . . . . . . . . . . . . . . . . .A-44Trimline Butyl Bead Air Spacer Specifications . . . . . . . . . . . . . . .A-45Trimline Butyl Bead Air Spacer Key Availability . . . . . . . . . . . . .A-46Trimline Butyl Bead Aluminum Air Spacer Fractional . . . . . . . .A-47Trimline Butyl Bead Aluminum Air Spacer Millimeter . . . . . . .A-48
A 43
Trimline Butyl Bead Air Spacer
A 44 Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
IN MM IN MM IN MM.014" [.36mm] Anodized Aluminum .311 7.90 .191 4.85 .014 .36.016" [.41mm] Anodized Aluminum .315 8.00 .195 4.95 .016 .41
H Hs TMaterial
Notes:1. Dimensions are in decimal inches; dimensions in [] brackets are in mm.2. Available with serrations at no extra charge on inside of Aluminum spacer at
3. Material tolerances can be found on Material Specifications Data page (ii).4. Thermal properties can be found on Thermal Performance Data page (iii).
location indicated above; not recommended for spacer to be used for bending.
CoinedSerrations(optional)
CoinedSerrations(optional)
Perforated(1/4" [6.5mm] and wider)
Zippered(all sizes)
B B
A A
R .0050.13 R .005
0.13
R +T .010 [.25]
R +T .010 [.25]4 PLCS4 PLCS
4 PLCS
.0160.40
.0411.04
.0390.99
T 2*T
A/6.0160.40
4 PLCS .0411.04
.0390.99
T
Tolerance: All dimensions .005 [.13 mm] unless otherwise specified.
18° 18°
A 45Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
1/4 .250 .0905/16 .313 .1533/8 .375 .215
15/32 .469 .3093/4 .750 .590
9 .354 .194
Trimline Butyl Bead Air Spacer SpecificationsAluminum: Clear Anodized, Color In™ Anodized & Mill Finish
Air SpacerWidth
Fractional
Decimal Equivalent
A B
Air SpacerWidth
Millimeter
Decimal Equivalent
A B
A 46
Trimline Butyl Bead Air Spacer Key Availability
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
A–Trimline Butyl Bead Ultra-Loc BI
A 47Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Air Spacer WidthFractional
Pieces PerShipping Carton
KeyAvailability
12'8"Lengths
Cut ToLength
Lineal Feet Per Shipping
Carton 12'8" Lengths A
1/4 350 TBA 4433 ■
5/16 250 TBA 31673/8 200 650 2533 ■
15/32 175 500 2217 ■
3/4 100 300 1267
Trimline Butyl Bead Air SpacerAluminum: Clear Anodized, Color In™ Anodized & Mill Finish
A 48 Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Air Spacer WidthMillimeter
Pieces PerShipping Carton
12'8"Lengths
Cut ToLength
Lineal Feet Per Shipping
Carton 12'8" Lengths
9 175 TBA 2217
Trimline Butyl Bead Air SpacerAluminum: Clear Anodized, Color In™ Anodized & Mill Finish
No key availabilty for this size.
T R I M L I N E .2 0 8 H I G H A I R S P A C E R
A N D A V A I L A B L E K E Y SA N D C O N N E C T O R S
Trimline .208 High Air Spacer . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-50Trimline .208 High Air Spacer Specifications . . . . . . . . . . . . . . . .A-51Trimline .208 High Air Spacer Key Availability . . . . . . . . . . . . . .A-52Trimline .208 High Aluminum Air Spacer Fractional . . . . . . . . .A-53
A 49
Trimline .208 High Air Spacer
A 50 Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
IN MM IN MM IN MM.010" [.25mm] Anodized Aluminum .305 7.75 .198 5.03 .010 .25.014" [.36mm] Anodized Aluminum .311 7.90 .204 5.18 .014 .36.016" [.41mm] Anodized Aluminum .315 8.00 .208 5.28 .016 .41
H Hs TMa terial
B B.0411.04
.0350.88
A
HHsT 2*THs
H
.0350.88
.0411.04
A
R .0050.13
R +T .010 [.25]
CoinedSerrations(optional)
CoinedSerrations(optional)
4 PLCS
4 PLCS
T
R .0050.13
R +T .010 [.25]
4 PLCS
A/64 PLCS
Notes:1. Dimensions are in decimal inches; dimensions in [] brackets are in mm.2. Available with serrations at no extra charge on inside of Aluminum spacer at
3. Material tolerances can be found on Material Specifications Data page (ii).4. Thermal properties can be found on Thermal Performance Data page (iii).
location indicated above; not recommended for spacer to be used for bending.
Perforated(1/4" [6.5mm] and wider)
Zippered(all sizes)
Tolerance: All dimensions .005 [.13 mm] unless otherwise specified.
18° 18°
1/4 .250 .0909/32 .281 .12119/64 .297 .1375/16 .313 .1533/8 .375 .2157/16 .438 .2781/2 .500 .3409/16 .563 .40319/32 .594 .4345/8 .625 .465
21/32 .656 .496 11/16 .688 .528 3/4 .750 .590
13/16 .813 .653
A 51Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Trimline .208 High Air Spacer SpecificationsAluminum: Clear Anodized, Color In™ Anodized & Mill Finish
Air SpacerWidth
Fractional
Decimal Equivalent
A B
A 52
Trimline .208 High Air Spacer Key Availability
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
A–Trimline Fixed w/ Hook C–Trimline Ultra-Loc WA
D–Trimline Ultra-Loc BI E–MP Flex w/ Hook F–MP Flex w/ Fin
G–MP Straight Connector H–MP Straight Connector PD
B–Trimline Fixed w/ Fin
A 53Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Trimline .208 High Air SpacerAluminum: Clear Anodized, Color In™ Anodized & Mill Finish
Air Spacer WidthFractional
Pieces PerShipping Carton Key Availability
12'8"Lengths
Cut ToLength
Lineal Feet Per Shipping
Carton 12'8" Lengths A B C D E F G H
1/4 350 1000 4433 ■ ■ ■ ■ ■ ■ ■ ■
9/32 300 TBA 3800 ■ ■ ■ ■ ■ ■
19/64 250 800 3167 ■ ■ ■ ■ ■ ■
5/16 250 800 3167 ■ ■ ■ ■ ■ ■ ■ ■
3/8 200 650 2533 ■ ■ ■ ■ ■ ■ ■ ■
7/16 175 500 2217 ■ ■ ■ ■ ■ ■ ■ ■
1/2 175 500 2217 ■ ■ ■ ■ ■ ■ ■ ■
9/16 160 425 2027 ■ ■ ■ ■ ■ ■ ■ ■
19/32 150 400 1900 ■ ■ ■ ■ ■ ■ ■
5/8 140 375 1773 ■ ■ ■ ■ ■ ■ ■ ■
21/32 140 375 1773 ■ ■ ■ ■ ■ ■ ■
11/16 130 350 1647 ■ ■ ■ ■ ■ ■ ■ ■
3/4 100 300 1267 ■ ■ ■ ■ ■ ■ ■ ■
13/16 100 300 1267 ■ ■ ■ ■ ■ ■
Available with pre-inserted connectors for bending equipment on request.
L P D A I R S P A C E RA N D A V A I L A B L E K E Y S
A N D C O N N E C T O R S
LPD Air Spacer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-56LPD Air Spacer Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-57LPD Air Spacer Key Availability . . . . . . . . . . . . . . . . . . . . . . . . . .A-58LPD Aluminum Air Spacer Fractional . . . . . . . . . . . . . . . . . . . . . .A-59LPD Aluminum Air Spacer Millimeter . . . . . . . . . . . . . . . . . . . . .A-60LPD Steel Air Spacer Fractional . . . . . . . . . . . . . . . . . . . . . . . . . . .A-61LPD Steel Air Spacer Millimeter . . . . . . . . . . . . . . . . . . . . . . . . . . .A-62LPD Hi-Q Air Spacer Fractional (.008) . . . . . . . . . . . . . . . . . . . . .A-63LPD Hi-Q Air Spacer Millimeter (.008) . . . . . . . . . . . . . . . . . . . . .A-64
A 55
A 56
LPD Air Spacer
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
A
B .0601.52
HHsHs H
A
B .0601.52
.0080.20
R +T .010 [.25]
R +T .010 [.25]
6 PLCS 6 PLCS
CoinedSerrations(optional)
CoinedSerrations(optional)
.0080.20 A/6
Perforated(1/4" [6.5mm] and wider)
Zippered(all sizes)
IN MM IN MM IN MM.008" [.20mm] Hi-Q Steel .224 5.69 .164 4.17 .008 .20.010" [.25mm] Anodized Aluminum .228 5.79 .168 4.27 .010 .25.012" [.30mm] Hi-Q Steel .232 5.89 .172 4.37 .012 .30.014" [.36mm] EG Steel .236 5.99 .176 4.47 .014 .36.014" [.36mm] Anodized Aluminum .236 5.99 .176 4.47 .014 .36.015" [.38mm] Black Steel .239 6.07 .179 4.55 .015 .38.016" [.41mm] Anodized Aluminum .240 6.10 .180 4.57 .016 .41.016" [.41mm] Mill Finish Aluminum .240 6.10 .180 4.57 .016 .41.0185" [.47mm] Anodized Aluminum .245 6.22 .185 4.70 .0185 .47
H Hs TMa teria l
T 2*TT
Notes:1. Dimensions are in decimal inches; dimensions in [] brackets are in mm.2. Available with serrations at no extra charge on inside of Aluminum spacer at
3. Material tolerances can be found on Material Specifications Data page (ii).4. Thermal properties can be found on Thermal Performance Data page (iii).
location indicated above; not recommended for spacer to be used for bending.
Tolerance: All dimensions .005 [.13 mm] unless otherwise specified.
45° 45°
LPD Air Spacer Specifications
A 57Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
3/16 .188 .0687/32 .219 .0991/4 .250 .130
17/64 .266 .1469/32 .281 .1615/16 .313 .19311/32 .344 .22423/64 .359 .2393/8 .375 .255
13/32 .406 .2867/16 .438 .31829/64 .453 .33315/32 .469 .34931/64 .484 .3641/2 .500 .380
17/32 .531 .4119/16 .563 .44319/32 .594 .4745/8 .625 .505
21/32 .656 .53611/16 .688 .56823/32 .719 .5993/4 .750 .630
25/32 .781 .66113/16 .813 .693
5.5 .217 .0976 .236 .1167 .276 .156
7.5 .295 .1758 .315 .1959 .354 .234
9.5 .374 .25410 .394 .27411 .433 .313
11.5 .453 .33312 .472 .35213 .512 .392
13.2 .520 .40013.5 .531 .41114 .551 .431
14.5 .571 .45115 .591 .471
15.5 .610 .49016 .630 .510
16.5 .650 .53017 .669 .549
17.5 .689 .56918.5 .728 .60819 .748 .628
19.5 .768 .64820 .787 .667
Air SpacerWidth
Fractional
Decimal Equivalent
A B
Air SpacerWidth
Millimeter
Decimal Equivalent
A B
A 58
LPD Air Spacer Key Availability
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
A–LPD Fixed B–LPD Folding C–LPD WA
E–LPD Flex F–LPD Straight Connector
G–LPD Straight Connector PD H–LPD Kronenberg Connector
D–LPD BI
A 59Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Air Spacer WidthFractional
Pieces PerShipping Carton Key Availability
12'8"Lengths
Cut ToLength
Lineal Feet Per Shipping
Carton 12'8" Lengths A B C D E F G H
LPD Air SpacerAluminum: Clear Anodized, Color In™ Anodized & Mill Finish
3/16 500 1500 6333 ■ ■ ■ ■ ■ ■ ■ ■
7/32 500 1400 6333 ■ ■ ■ ■ ■ ■ ■
1/4 400 1300 5067 ■ ■ ■ ■ ■ ■ ■ ■
17/64 375 1150 4750 ■ ■ ■ ■ ■ ■
9/32 375 1150 4750 ■ ■ ■ ■ ■ ■ ■ ■
5/16 350 1000 4433 ■ ■ ■ ■ ■ ■ ■ ■
11/32 300 950 3800 ■ ■ ■ ■ ■ ■ ■ ■
23/64 300 900 3800 ■ ■ ■ ■ ■ ■
3/8 275 850 3483 ■ ■ ■ ■ ■ ■ ■ ■
13/32 275 800 3483 ■ ■ ■ ■ ■ ■ ■ ■
7/16 250 750 3167 ■ ■ ■ ■ ■ ■ ■ ■
15/32 225 675 2850 ■ ■ ■ ■ ■ ■ ■ ■
1/2 225 650 2850 ■ ■ ■ ■ ■ ■ ■ ■
17/32 200 550 2533 ■ ■ ■ ■ ■ ■ ■ ■
9/16 200 550 2533 ■ ■ ■ ■ ■ ■ ■ ■
19/32 175 500 2217 ■ ■ ■ ■ ■ ■ ■
5/8 175 500 2217 ■ ■ ■ ■ ■ ■ ■ ■
21/32 160 450 2027 ■ ■ ■ ■ ■ ■ ■
11/16 150 TBA 1900 ■ ■ ■ ■ ■ ■ ■
23/32 145 400 1837 ■ ■ ■ ■ ■ ■ ■
3/4 140 400 1773 ■ ■ ■ ■ ■ ■ ■
25/32 130 375 1647 ■ ■ ■ ■ ■ ■
13/16 125 375 1583 ■ ■ ■ ■ ■
Available with pre-inserted connectors for bending equipment on request.
A 60 Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Air Spacer WidthMillimeter
Pieces PerShipping Carton Key Availability
12'8"Lengths
Cut ToLength
Lineal Feet Per Shipping
Carton 12'8" Lengths A B C D E F G H
5.5 450 1350 5700 ■ ■ ■ ■ ■ ■ ■
6 400 1300 5067 ■ ■ ■ ■ ■ ■
7 375 1150 4750 ■ ■ ■ ■ ■ ■ ■ ■
7.5 350 1100 4433 ■ ■ ■ ■ ■ ■ ■
8 350 1000 4433 ■ ■ ■ ■ ■ ■ ■ ■
9 300 900 3800 ■ ■ ■ ■ ■ ■ ■
9.5 275 825 3483 ■ ■ ■ ■ ■ ■ ■ ■
10 275 825 3483 ■ ■ ■ ■ ■ ■ ■
11 250 750 3167 ■ ■ ■ ■ ■ ■ ■ ■
11.5 225 675 2850 ■ ■ ■ ■ ■ ■ ■
12 225 675 2850 ■ ■ ■ ■ ■ ■ ■ ■
13 215 625 2724 ■ ■ ■ ■ ■ ■ ■
13.5 200 500 2533 ■ ■ ■ ■ ■ ■ ■
14 200 500 2533 ■ ■ ■ ■ ■ ■ ■
14.5 200 500 2533 ■ ■ ■ ■ ■ ■ ■ ■
15 175 500 2217 ■ ■ ■ ■ ■ ■ ■
15.5 175 500 2217 ■ ■ ■ ■ ■ ■ ■
16 175 500 2217 ■ ■ ■ ■ ■ ■ ■ ■
17 150 450 1900 ■ ■ ■ ■ ■ ■
18.5 145 425 1837 ■ ■ ■ ■ ■ ■ ■
19 125 400 1583 ■ ■ ■ ■ ■ ■ ■
19.5 125 TBA 1583 ■ ■ ■ ■ ■
20 125 350 1583 ■ ■ ■ ■ ■ ■
LPD Air SpacerAluminum: Clear Anodized, Color In™ Anodized & Mill Finish
Available with pre-inserted connectors for bending equipment on request.
A 61
LPD Air SpacerSteel: Electro Galvanized and Black
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Air Spacer WidthFractional
Key AvailabilityLineal Feet Per Shipping
Carton 12'8" Lengths A B C D E F G
3/16 250 3167 ■ ■ ■ ■ ■ ■ ■
7/32 250 3167 ■ ■ ■ ■ ■ ■
1/4 200 2533 ■ ■ ■ ■ ■ ■ ■
17/64 190 2407 ■ ■ ■ ■ ■ ■
9/32 190 2407 ■ ■ ■ ■ ■ ■ ■
5/16 175 2217 ■ ■ ■ ■ ■ ■ ■
11/32 150 1900 ■ ■ ■ ■ ■ ■ ■
23/64 150 1900 ■ ■ ■ ■ ■ ■
3/8 140 1773 ■ ■ ■ ■ ■ ■ ■
13/32 140 1773 ■ ■ ■ ■ ■ ■ ■
7/16 125 1583 ■ ■ ■ ■ ■ ■ ■
15/32 120 1520 ■ ■ ■ ■ ■ ■ ■
1/2 120 1520 ■ ■ ■ ■ ■ ■ ■
17/32 100 1267 ■ ■ ■ ■ ■ ■ ■
9/16 100 1267 ■ ■ ■ ■ ■ ■ ■
19/32 90 1140 ■ ■ ■ ■ ■ ■
5/8 90 1140 ■ ■ ■ ■ ■ ■ ■
21/32 80 1013 ■ ■ ■ ■ ■ ■
11/16 75 950 ■ ■ ■ ■ ■ ■
23/32 75 950 ■ ■ ■ ■ ■ ■
3/4 70 887 ■ ■ ■ ■ ■ ■
25/32 65 823 ■ ■ ■ ■ ■ ■
13/16 60 760 ■ ■ ■ ■ ■
Pieces PerShipping Carton
12'8" Lengths
Available with pre-inserted connectors for bending equipment on request.
A 62 Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
LPD Steel Air SpacerSteel: Electro Galvanized and Black
Air Spacer WidthMillimeter
Key AvailabilityLineal Feet Per Shipping
Carton 12'8" Lengths A B C D E F G
5.5 225 2850 ■ ■ ■ ■ ■ ■
6 200 2533 ■ ■ ■ ■ ■ ■
7 190 2407 ■ ■ ■ ■ ■ ■ ■
7.5 175 2217 ■ ■ ■ ■ ■ ■
8 175 2217 ■ ■ ■ ■ ■ ■ ■
9 150 1900 ■ ■ ■ ■ ■ ■
9.5 140 1773 ■ ■ ■ ■ ■ ■ ■
10 140 1773 ■ ■ ■ ■ ■ ■
11 120 1520 ■ ■ ■ ■ ■ ■ ■
11.5 115 1457 ■ ■ ■ ■ ■ ■
12 110 1393 ■ ■ ■ ■ ■ ■ ■
13 110 1393 ■ ■ ■ ■ ■ ■
13.5 100 1267 ■ ■ ■ ■ ■ ■ ■
14 100 1267 ■ ■ ■ ■ ■ ■
14.5 100 1267 ■ ■ ■ ■ ■ ■ ■
15 90 1140 ■ ■ ■ ■ ■ ■
15.5 90 1140 ■ ■ ■ ■ ■ ■
16 90 1140 ■ ■ ■ ■ ■ ■ ■
17.5 75 950 ■ ■ ■ ■ ■ ■
18.5 TBA TBA ■ ■ ■ ■ ■ ■
19 70 887 ■ ■ ■ ■ ■ ■
19.5 65 824 ■ ■ ■ ■ ■
20 65 823 ■ ■ ■ ■ ■ ■
Pieces PerShipping Carton
12'8" Lengths
Available with pre-inserted connectors for bending equipment on request.
A 63
LPD Air SpacerSteel: Hi Q in .008
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Air Spacer WidthFractional
Key AvailabilityLineal Feet Per Shipping
Carton 12'8" Lengths A B C D E F G
3/8 190 2407 ■ ■ ■ ■ ■ ■ ■
13/32 200 2533 ■ ■ ■ ■ ■ ■ ■
7/16 175 2217 ■ ■ ■ ■ ■ ■ ■
15/32 175 2217 ■ ■ ■ ■ ■ ■ ■
31/64 170 2153 ■ ■ ■ ■ ■ ■
1/2 170 2153 ■ ■ ■ ■ ■ ■ ■
9/16 150 1900 ■ ■ ■ ■ ■ ■ ■
5/8 130 1647 ■ ■ ■ ■ ■ ■ ■
21/32 120 1520 ■ ■ ■ ■ ■ ■
Pieces PerShipping Carton
12'8" Lengths
Available with pre-inserted connectors for bending equipment on request.
A 64 Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
LPD Air SpacerSteel: Hi Q in .008
Air Spacer WidthMillimeter
Key AvailabilityLineal Feet Per Shipping
Carton 12'8" Lengths A B C D E F G
6 300 3800 ■ ■ ■ ■ ■ ■
6.5 300 3800 ■ ■ ■ ■ ■ ■ ■
7.5 260 3293 ■ ■ ■ ■ ■ ■
8 260 3293 ■ ■ ■ ■ ■ ■ ■
9 225 2850 ■ ■ ■ ■ ■ ■
9.5 200 2533 ■ ■ ■ ■ ■ ■ ■
11 190 2407 ■ ■ ■ ■ ■ ■ ■
11.5 170 2153 ■ ■ ■ ■ ■ ■
12 170 2153 ■ ■ ■ ■ ■ ■ ■
Pieces PerShipping Carton
12'8" Lengths
Available with pre-inserted connectors for bending equipment on request.
L P D S W ( S T R A I G H T W A L L )A I R S P A C E R
A N D A V A I L A B L E K E Y SA N D C O N N E C T O R S
LPD SW (Straight Wall) Air Spacer . . . . . . . . . . . . . . . . . . . . . . . .A-66LPD SW (Straight Wall) Air Spacer Specifications . . . . . . . . . . . .A-67LPD SW (Straight Wall) Air Spacer Key Availability . . . . . . . . .A-68LPD SW (Straight Wall) Aluminum Air Spacer Fractional . . . . .A-69LPD SW (Straight Wall) Aluminum Air Spacer Millimeter . . . .A-70LPD SW (Straight Wall) Steel Air Spacer Fractional . . . . . . . . . .A-71LPD SW (Straight Wall) Steel Air Spacer Millimeter . . . . . . . . . .A-72LPD SW (Straight Wall) Hi-Q Air Spacer Millimeter (.010) . . . .A-73
A 65
A 66
LPD SW (Straight Wall) Air Spacer
Hs H
A
B
A
.0601.52
.0601.52
B
Hs H
R +T .010 [.25]
R +T .010 [.25]
A/6
T T 2*TCoinedSerrations(optional)
6 PLCS6 PLCS
CoinedSerrations(optional)
Notes:1. Dimensions are in decimal inches; dimensions in [] brackets are in mm.2. Available with serrations at no extra charge on inside of Aluminum spacer at
3. Material tolerances can be found on Material Specifications Data page (ii).4. Thermal properties can be found on Thermal Performance Data page (iii).
location indicated above; not recommended for spacer to be used for bending.
Perforated(1/4" [6.5mm] and wider)
Zippered(all sizes)
IN MM IN MM IN MM.008" [.20mm] Hi-Q Steel .224 5.69 .172 4.37 .008 .20.010" [.25mm] Anodized Aluminum .228 5.79 .174 4.42 .010 .25.012" [.30mm] Hi-Q Steel .232 5.89 .176 4.47 .012 .30.014" [.36mm] EG Steel .236 5.99 .178 4.52 .014 .36.014" [.36mm] Anodized Aluminum .236 5.99 .178 4.52 .014 .36.015" [.38mm] Black Steel .238 6.05 .179 4.55 .015 .38.016" [.41mm] Anodized Aluminum .240 6.10 .180 4.57 .016 .41.016" [.41mm] Mill Finish Aluminum .240 6.10 .180 4.57 .016 .41.0185" [.47mm] Anodized Aluminum .245 6.22 .185 4.70 .0185 .47
H Hs TMaterial
Tolerance: All dimensions .005 [.13 mm] unless otherwise specified.
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
45° 45°
LPD SW (Straight Wall) Air Spacer Specifications
3/16 .188 .0687/32 .219 .0991/4 .250 .130
17/64 .266 .1469/32 .281 .1615/16 .313 .19311/32 .344 .22423/64 .359 .2393/8 .375 .255
13/32 .406 .2867/16 .438 .31815/32 .469 .3491/2 .500 .380
17/32 .531 .4119/16 .563 .44319/32 .594 .4745/8 .625 .505
21/32 .656 .53611/16 .688 .56823/32 .719 .5993/4 .750 .630
25/32 .781 .66113/16 .813 .693
5.5 .217 .0976 .236 .1167 .276 .156
7.5 .295 .1758 .315 .1959 .354 .234
9.5 .374 .25410 .394 .27411 .433 .313
11.5 .453 .33312 .472 .35213 .512 .392
13.2 .520 .40013.5 .531 .41114 .551 .431
14.5 .571 .45115 .591 .471
15.5 .610 .49016 .630 .51017 .669 .549
18.5 .728 .60819 .748 .628
19.5 .768 .648
A 67Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Air SpacerWidth
Fractional
Decimal Equivalent
A B
Air SpacerWidth
Millimeter
Decimal Equivalent
A B
A 68
LPD SW (Straight Wall) Air Spacer Key Availability
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
A–LPD Fixed B–LPD Folding C–LPD WA
D–LPD BI E–LPD Flex F–LPD Straight Connector
G–LPD Straight Connector PD
A 69
LPD SW (Straight Wall) Air SpacerAluminum: Clear Anodized, Color In™ Anodized & Mill Finish
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Air Spacer WidthFractional
Pieces PerShipping Carton Key Availability
12'8"Lengths
Cut ToLength
Lineal Feet Per Shipping
Carton 12'8" Lengths A B C D E F G
3/16 500 1500 6333 ■ ■ ■ ■ ■ ■ ■
7/32 500 1400 6333 ■ ■ ■ ■ ■ ■
1/4 400 1300 5067 ■ ■ ■ ■ ■ ■ ■
17/64 375 1150 4750 ■ ■ ■ ■ ■ ■
9/32 375 1150 4750 ■ ■ ■ ■ ■ ■ ■
5/16 350 1000 4433 ■ ■ ■ ■ ■ ■ ■
11/32 300 950 3800 ■ ■ ■ ■ ■ ■ ■
23/64 300 900 3800 ■ ■ ■ ■ ■ ■
3/8 275 850 3483 ■ ■ ■ ■ ■ ■ ■
13/32 275 850 3483 ■ ■ ■ ■ ■ ■ ■
7/16 250 750 3167 ■ ■ ■ ■ ■ ■ ■
15/32 225 675 2850 ■ ■ ■ ■ ■ ■ ■
1/2 225 650 2850 ■ ■ ■ ■ ■ ■ ■
17/32 200 550 2533 ■ ■ ■ ■ ■ ■ ■
9/16 200 550 2533 ■ ■ ■ ■ ■ ■ ■
19/32 175 500 2217 ■ ■ ■ ■ ■ ■
5/8 175 500 2217 ■ ■ ■ ■ ■ ■ ■
21/32 160 450 2027 ■ ■ ■ ■ ■ ■
11/16 150 425 1900 ■ ■ ■ ■ ■ ■
23/32 145 400 1837 ■ ■ ■ ■ ■ ■
3/4 140 400 1773 ■ ■ ■ ■ ■ ■
25/32 130 375 1647 ■ ■ ■ ■ ■ ■
13/16 125 375 1583 ■ ■ ■ ■ ■
Available with pre-inserted connectors for bending equipment on request.
A 70
Air Spacer WidthMillimeter
Pieces PerShipping Carton Key Availability
12'8"Lengths
Cut ToLength
Lineal Feet Per Shipping
Carton 12'8" Lengths A B C D E F G
LPD SW (Straight Wall) Air SpacerAluminum: Clear Anodized, Color In™ Anodized & Mill Finish
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
5.5 450 1350 5700 ■ ■ ■ ■ ■ ■
6 400 1300 5067 ■ ■ ■ ■ ■ ■
7 375 1150 4750 ■ ■ ■ ■ ■ ■ ■
7.5 350 1150 4433 ■ ■ ■ ■ ■ ■
8 350 1000 4433 ■ ■ ■ ■ ■ ■ ■
9 300 900 3800 ■ ■ ■ ■ ■ ■
9.5 275 825 3483 ■ ■ ■ ■ ■ ■ ■
10 275 850 3483 ■ ■ ■ ■ ■ ■
11 250 750 3167 ■ ■ ■ ■ ■ ■ ■
11.5 225 675 2850 ■ ■ ■ ■ ■ ■
12 225 675 2850 ■ ■ ■ ■ ■ ■ ■
13 215 625 2724 ■ ■ ■ ■ ■ ■
13.5 200 500 2533 ■ ■ ■ ■ ■ ■ ■
14 200 500 2533 ■ ■ ■ ■ ■ ■
14.5 200 500 2533 ■ ■ ■ ■ ■ ■ ■
15 175 500 2217 ■ ■ ■ ■ ■ ■
15.5 175 500 2217 ■ ■ ■ ■ ■ ■
16 175 500 2217 ■ ■ ■ ■ ■ ■ ■
17 150 475 1900 ■ ■ ■ ■ ■
18.5 145 400 1836 ■ ■ ■ ■ ■ ■
19 125 400 1583 ■ ■ ■ ■ ■ ■
19.5 125 TBA 1583 ■ ■ ■ ■ ■
Available with pre-inserted connectors for bending equipment on request.
A 71
Air Spacer WidthFractional
Pieces PerShipping Carton Key Availability
12'8"Lengths
Lineal Feet Per Shipping
Carton 12'8" Lengths A B C D E F G
3/16 250 3167 ■ ■ ■ ■ ■ ■ ■
7/32 250 3167 ■ ■ ■ ■ ■ ■
1/4 200 2533 ■ ■ ■ ■ ■ ■ ■
17/64 190 2407 ■ ■ ■ ■ ■ ■
9/32 190 2407 ■ ■ ■ ■ ■ ■ ■
5/16 175 2167 ■ ■ ■ ■ ■ ■ ■
11/32 150 1900 ■ ■ ■ ■ ■ ■ ■
23/64 150 1900 ■ ■ ■ ■ ■ ■
3/8 140 1773 ■ ■ ■ ■ ■ ■ ■
13/32 140 1773 ■ ■ ■ ■ ■ ■ ■
7/16 125 1583 ■ ■ ■ ■ ■ ■ ■
15/32 120 1520 ■ ■ ■ ■ ■ ■ ■
1/2 120 1520 ■ ■ ■ ■ ■ ■ ■
17/32 100 1267 ■ ■ ■ ■ ■ ■ ■
9/16 100 1267 ■ ■ ■ ■ ■ ■ ■
19/32 90 1140 ■ ■ ■ ■ ■ ■
5/8 90 1140 ■ ■ ■ ■ ■ ■ ■
21/32 80 1013 ■ ■ ■ ■ ■ ■
11/16 75 950 ■ ■ ■ ■ ■ ■
23/32 75 950 ■ ■ ■ ■ ■ ■
3/4 70 887 ■ ■ ■ ■ ■ ■
25/32 65 823 ■ ■ ■ ■ ■ ■
13/16 60 760 ■ ■ ■ ■ ■
LPD SW (Straight Wall) Air SpacerSteel: Electro Galvanized and Black
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Available with pre-inserted connectors for bending equipment on request.
A 72 Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
LPD SW (Straight Wall) Air SpacerSteel: Electro Galvanized and Black
Air Spacer WidthMillimeter
Pieces PerShipping Carton Key Availability
12'8"Lengths
Lineal Feet Per Shipping
Carton 12'8" Lengths A B C D E F G
5.5 225 2850 ■ ■ ■ ■ ■ ■
6 200 2533 ■ ■ ■ ■ ■ ■
7 190 2407 ■ ■ ■ ■ ■ ■ ■
7.5 175 2167 ■ ■ ■ ■ ■ ■
8 175 2167 ■ ■ ■ ■ ■ ■ ■
9 150 1900 ■ ■ ■ ■ ■ ■
9.5 140 1773 ■ ■ ■ ■ ■ ■ ■
10 140 1773 ■ ■ ■ ■ ■ ■
11 125 1583 ■ ■ ■ ■ ■ ■ ■
11.5 120 1520 ■ ■ ■ ■ ■ ■
12 120 1520 ■ ■ ■ ■ ■ ■ ■
13 110 1393 ■ ■ ■ ■ ■ ■
13.5 100 1267 ■ ■ ■ ■ ■ ■ ■
14 100 1267 ■ ■ ■ ■ ■ ■
14.5 100 1267 ■ ■ ■ ■ ■ ■ ■
15 90 1140 ■ ■ ■ ■ ■ ■
15.5 90 1140 ■ ■ ■ ■ ■ ■
16 90 1140 ■ ■ ■ ■ ■ ■ ■
17 75 950 ■ ■ ■ ■ ■
18.5 75 950 ■ ■ ■ ■ ■ ■
19 60 760 ■ ■ ■ ■ ■ ■
19.5 60 760 ■ ■ ■ ■ ■
Available with pre-inserted connectors for bending equipment on request.
A 73Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
LPD SW (Straight Wall) Air SpacerSteel: Hi Q in .010
Air Spacer WidthMillimeter
Key AvailabilityLineal Feet Per Shipping
Carton 12'8" Lengths A B C D E F G
6 200 2533 ■ ■ ■ ■ ■ ■
14 100 1267 ■ ■ ■ ■ ■ ■
15 90 1140 ■ ■ ■ ■ ■ ■
17 75 950 ■ ■ ■ ■ ■
18.5 75 950 ■ ■ ■ ■ ■ ■
Pieces PerShipping Carton
12'8" Lengths
Available with pre-inserted connectors for bending equipment on request.
L P X A I R S P A C E RA N D A V A I L A B L E
C O N N E C T O R S
LPX Air Spacer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-76LPX Air Spacer Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-77LPX Air Spacer Connector Availability . . . . . . . . . . . . . . . . . . . . .A-78LPX Aluminum Air Spacer Fractional . . . . . . . . . . . . . . . . . . . . . .A-79LPX Aluminum Air Spacer Millimeter . . . . . . . . . . . . . . . . . . . . .A-80LPX Electro Galvanized Steel Air Spacer Fractional . . . . . . . . . .A-81LPX Hi-Q Steel Air Spacer Millimeter (.008) . . . . . . . . . . . . . . . .A-82
A 75
LPX Air Spacer
A 76 Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
.0290.74
.0300.76
HHs
A
B
R +T .010 [.25]
CoinedSerrations(optional)
4 PLCS
T 2*THs H
A
B
.0300.76
.0290.74
T
4 PLCS
CoinedSerrations(optional)
R .0050.13
4 PLCS
R +T .010 [.25]
R .0050.13
4 PLCS
A/4
Perforated(1/4" [6.5mm] and wider)
Zippered(all sizes)
Notes:1. Dimensions are in decimal inches; dimensions in [] brackets are in mm.2. Available with serrations at no extra charge on inside of Aluminum spacer at
3. Material tolerances can be found on Material Specifications Data page (ii).4. Thermal properties can be found on Thermal Performance Data page (iii).
location indicated above; not recommended for spacer to be used for bending.
IN MM IN MM IN MM.008" [.20mm] .240 6.10 .179 4.55 .008 .20.010" [.25mm] Anodized Aluminum .240 6.10 .179 4.55 .010 .25.012" [.30mm] Hi-Q Steel
Hi-Q Steel
.244 6.20 .181 4.60 .012 .30.014" [.36mm] Anodized Aluminum .245 6.22 .183 4.65 .014 .36.016" [.41mm] Anodized Aluminum .255 6.48 .195 4.95 .016 .41.016" [.41mm] Mill Finish Aluminum .255 6.48 .195 4.95 .016 .41.0185" [.47mm] Mill Finish Aluminum .260 6.60 .200 5.08 .0185 .47
H Hs TMa teria l
Tolerance: All dimensions .005 [.13 mm] unless otherwise specified.
26° 26°
A 77
LPX Air Spacer Specifications
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
3/16 .188 .0687/32 .219 .0991/4 .250 .1309/32 .281 .1615/16 .313 .19321/64 .328 .20911/32 .344 .2243/8 .375 .255
13/32 .406 .2867/16 .438 .31815/32 .469 .3491/2 .500 .380
17/32 .531 .4119/16 .563 .44319/32 .594 .4745/8 .625 .505
21/32 .656 .53611/16 .688 .56823/32 .719 .5993/4 .750 .630
13/16 .813 .693
5 .197 .0775.5 .217 .0976 .236 .116
6.5 .256 .1377.5 .295 .1758 .315 .195
8.5 .335 .2168.9 .350 .2319 .354 .234
9.5 .374 .25410 .394 .274
10.5 .413 .29411 .433 .313
11.5 .453 .33312 .472 .352
12.5 .492 .37312.7 .500 .38113.5 .531 .41114 .551 .431
14.5 .571 .45115 .591 .471
15.4 .606 .48715.5 .610 .49017.5 .689 .56918.4 .724 .60518.5 .728 .60819 .748 .628
Air SpacerWidth
Fractional
Decimal Equivalent
A B
Air SpacerWidth
Millimeter
Decimal Equivalent
A B
A 78
LPX Air Spacer Connector Availability
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
A–LPD Straight Connector B–LPD Straight Connector PD C–LPX Kronenberg Connector
Note: LPX Spacer uses LPD Straight Connectors and LPX Kronenberg Connectors.
A 79
LPX Air SpacerAluminum: Clear Anodized, Color In™ Anodized & Mill Finish
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Air Spacer WidthFractional
Pieces PerShipping Carton Key Availability
12'8"Lengths
Cut ToLength
Lineal Feet Per Shipping
Carton 12'8" Lengths A B C
3/16 500 1500 6333 ■ ■
7/32 500 1400 6333 ■
1/4 400 1300 5067 ■ ■ ■
9/32 375 1150 4750 ■ ■
5/16 350 1000 4433 ■ ■ ■
11/32 300 950 3800 ■ ■
3/8 275 850 3483 ■ ■ ■
13/32 275 850 3483 ■ ■
7/16 250 750 3167 ■ ■ ■
15/32 225 675 2850 ■ ■ ■
1/2 225 650 2850 ■ ■ ■
17/32 200 550 2533 ■ ■ ■
9/16 200 550 2533 ■ ■ ■
19/32 175 500 2217 ■ ■
5/8 175 500 2217 ■ ■ ■
21/32 160 450 2027 ■ ■
11/16 150 425 1900 ■ ■
23/32 145 400 1837 ■ ■
3/4 140 400 1733 ■ ■
Note: LPX Spacer uses LPD Straight Connectorsand LPX Kronenberg Connectors.Available with pre-inserted connectors for bending equipment on request.
A 80
LPX Air SpacerAluminum: Clear Anodized, Color In™ Anodized & Mill Finish
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Air Spacer WidthMillimeter
Pieces PerShipping Carton Key Availability
12'8"Lengths
Cut ToLength
Lineal Feet Per Shipping
Carton 12'8" Lengths A B C
5 500 TBA 6333 ■ ■
5.5 475 1350 6016 ■
6 400 1300 5067 ■
6.5 400 TBA 5067 ■ ■
7.5 350 1150 4433 ■
8 350 1000 4433 ■ ■ ■
9 300 900 3800 ■
9.5 275 825 3483 ■ ■ ■
10 275 850 3483 ■
10.5 250 TBA 3167 ■ ■
11 250 750 3167 ■ ■
11.5 225 675 2850 ■
12 225 675 2850 ■ ■
12.5 225 TBA 2850 ■
13.5 200 500 2533 ■ ■ ■
14 200 500 2533 ■
14.5 200 500 2533 ■ ■
15 175 500 2217 ■
15.5 175 500 2217 ■
16 175 500 2217 ■ ■
17.5 150 TBA 1900 ■ ■
18.5 140 400 1773 ■ ■
19 125 TBA 1583 ■
Note: LPX Spacer uses LPD Straight Connectors.Available with pre-inserted connectors for bending equipment on request.
A 81Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
LPX Air SpacerSteel: Electro Galvanized
Air Spacer WidthFractional
KeyAvailabilityLineal Feet
Per ShippingCarton
12'8" Lengths A B
1/2 120 1520 ■ ■
Pieces PerShipping Carton
12'8" Lengths
Note: LPX Spacer uses LPD Straight Connectors.Available with pre-inserted connectors for bending equipment on request.
Air Spacer WidthMillimeter
Lineal Feet Per Shipping
Carton 12'8" Lengths
5 250 3167 ■ ■
6 200 2533 ■
9.5 140 1773 ■ ■
11.5 125 1583 ■
Pieces PerShipping Carton
12'8" Lengths
A 82 Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
LPX Air SpacerSteel: Hi Q in .008
KeyAvailability
A B
Note: LPX Spacer uses LPD Straight Connectors.Available with pre-inserted connectors for bending equipment on request.
L P X A I R S P A C E R w / C U P SA N D A V A I L A B L E
C O N N E C T O R S
LPX Air Spacer w/ Cups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-84LPX Air Spacer w/ Cups Specifications . . . . . . . . . . . . . . . . . . . .A-85LPX Air Spacer w/ Cups Connector Availability . . . . . . . . . . . .A-86LPX Air Spacer w/ Cups Air Spacer Fractional . . . . . . . . . . . . . .A-87
A 83
LPX Air Spacer w/ Cups
A 84 Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
IN MM IN MM IN MM.010" [.13mm] Anodized Aluminum .240 6.10 .179 4.55 .010 .25.012" [.30mm] Hi-Q Steel .244 6.20 .181 4.60 .012 .30.014" [.36mm] Anodized Aluminum .245 6.22 .183 4.65 .014 .36.016" [.41mm] Anodized Aluminum .255 6.48 .195 4.95 .016 .41.016" [.41mm] Mill Finish Aluminum .255 6.48 .195 4.95 .016 .41.0185" [.47mm] Mill Finish Aluminum .260 6.60 .200 5.08 .0185 .47
H Hs TMaterial
.0290.74
.0300.76
HHs
A
B
R +T .010 [.25]
CoinedSerrations(optional)
4 PLCS
T 2*THs H
A
B
.0300.76
.0290.74
T
4 PLCS
CoinedSerrations(optional)
R .0050.13
4 PLCS
R +T .010 [.25]
R .0050.13
4 PLCS
A/4
Perforated(1/4" [6.5mm] and wider)
Zippered(all sizes)
.0040.10
.0040.10
Notes:1. Dimensions are in decimal inches; dimensions in [] brackets are in mm.2. Available with serrations at no extra charge on inside of Aluminum spacer at
3. Material tolerances can be found on Material Specifications Data page (ii).4. Thermal properties can be found on Thermal Performance Data page (iii).
location indicated above; not recommended for spacer to be used for bending.
Tolerance: All dimensions .005 [.13 mm] unless otherwise specified.
26° 26°
A 85
LPX Air Spacer w/ Cups Specifications
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
3/16 .188 .0687/32 .219 .0991/4 .250 .1305/16 .313 .1933/8 .375 .2557/16 .438 .3181/2 .500 .3809/16 .563 .4435/8 .625 .5053/4 .750 .630
Air SpacerWidth
Fractional
Decimal Equivalent
A B
A 86
LPX Air Spacer w/ Cups Connector Availability
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
A–LPD Straight Connector B–LPD Straight Connector PD
Note: LPX Spacer uses LPD Straight Connectors.
A 87
LPX Air Spacer w/ Cups Aluminum: Clear Anodized, Color In™ Anodized & Mill Finish
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Air Spacer WidthFractional
Pieces PerShipping Carton
KeyAvailability
12'8" Lengths
Lineal Feet Per Shipping
Carton 12'8" Lengths A B
3/16 500 6333 ■ ■
7/32 500 6333 ■
1/4 400 5067 ■ ■
5/16 350 4433 ■ ■
3/8 275 3483 ■ ■
7/16 250 3167 ■ ■
1/2 225 2850 ■ ■
9/16 200 2533 ■ ■
5/8 175 2217 ■ ■
3/4 140 1733 ■
Note: LPX Spacer uses LPD Straight Connectors.Available with pre-inserted connectors for bending equipment on request.
L P X C A I R S P A C E RA N D A V A I L A B L E K E Y S
A N D C O N N E C T O R S
LPXC Air Spacer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-90LPXC Air Spacer Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . .A-91LPXC Air Spacer Key Availability . . . . . . . . . . . . . . . . . . . . . . . . .A-92LPXC Aluminum Air Spacer Fractional . . . . . . . . . . . . . . . . . . . .A-93LPXC Aluminum Air Spacer Millimeter . . . . . . . . . . . . . . . . . . . .A-94
A 89
A 90
LPXC Air Spacer
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Notes:1. Dimensions are in decimal inches; dimensions in [] brackets are in mm.2. Material tolerances can be found on Material Specifications Data page (ii).3. Thermal properties can be found on Thermal Performance Data page (iii).
Perforated(1/4" [6.5mm] and wider)
Zippered(all sizes)
IN MM IN MM IN MM.014" [.36mm] Anodized Aluminum .245 6.22 .183 4.65 .014 .36.016" [.41mm] Anodized Aluminum .255 6.48 .195 4.95 .016 .41
H Hs TMa teria l
A
B
.0180.46
Hs H
.0300.76
.0290.74
T
R .0050.13
R +T .010 [.25]
4 PLCS
4 PLCS
A
B
2*TT
.0300.76
.0290.74
.0180.46
Hs H
A/4R +T .010 [.25]4 PLCS
R .0050.13
4 PLCS
R .0621.57
R .0621.57
Tolerance: All dimensions .005 [.13 mm] unless otherwise specified.
26° 26°
A 91
LPXC Air Spacer SpecificationsAluminum: Clear Anodized, Color In™ Anodized & Mill Finish
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
1/4 .250 .1319/32 .281 .1625/16 .313 .19411/32 .344 .2253/8 .375 .256
13/32 .406 .2877/16 .438 .31915/32 .469 .3501/2 .500 .381
17/32 .531 .4129/16 .563 .44419/32 .594 .4755/8 .625 .506
21/32 .656 .53711/16 .688 .56923/32 .719 .6003/4 .750 .631
13/16 .813 .694
9 .346 .22712 .472 .353
15.5 .610 .491
Air SpacerWidth
Fractional
Decimal Equivalent
A B
Air SpacerWidth
Millimeter
Decimal Equivalent
A B
A 92
LPXC Air Spacer Key Availability
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
A–LPD Fixed B–LPD Folding C–LPD WA
D–LPD BI E–LPD Flex F–LPD Straight Connector
G–LPD Straight Connector PD H–LPX Kronenberg Connector
LPXC Spacer uses LPD Keys and Connectors.
A 93
LPXC Air SpacerAluminum: Clear Anodized, Color In™ Anodized & Mill Finish
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Air Spacer WidthFractional
Pieces PerShipping Carton Key Availability
12'8"Lengths
Cut ToLength
Lineal Feet Per Shipping
Carton 12'8" Lengths A B C D E F G H
1/4 400 1300 5067 ■ ■ ■ ■ ■ ■ ■ ■
9/32 375 TBA 4750 ■ ■ ■ ■ ■ ■ ■
5/16 350 TBA 4433 ■ ■ ■ ■ ■ ■ ■ ■
11/32 300 TBA 3800 ■ ■ ■ ■ ■ ■ ■
3/8 275 TBA 3483 ■ ■ ■ ■ ■ ■ ■ ■
13/32 275 TBA 3483 ■ ■ ■ ■ ■ ■ ■
7/16 250 750 3167 ■ ■ ■ ■ ■ ■ ■ ■
15/32 225 TBA 2850 ■ ■ ■ ■ ■ ■ ■ ■
1/2 225 650 2850 ■ ■ ■ ■ ■ ■ ■ ■
17/32 200 TBA 2533 ■ ■ ■ ■ ■ ■ ■ ■
9/16 200 TBA 2533 ■ ■ ■ ■ ■ ■ ■ ■
19/32 175 TBA 2167 ■ ■ ■ ■ ■ ■ ■
5/8 175 TBA 2167 ■ ■ ■ ■ ■ ■ ■ ■
21/32 160 TBA 2027 ■ ■ ■ ■ ■ ■ ■
11/16 150 TBA 1900 ■ ■ ■ ■ ■ ■ ■
23/32 145 TBA 1837 ■ ■ ■ ■ ■ ■ ■
3/4 140 TBA 1773 ■ ■ ■ ■ ■ ■ ■
13/16 125 TBA 1583 ■ ■ ■ ■ ■
LPXC Spacer uses LPD Keys and Connectors.Available with pre-inserted connectors for bending equipment on request.
A 94
LPXC Air SpacerAluminum: Clear Anodized, Color In™ Anodized & Mill Finish
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Air Spacer WidthMillimeter
Pieces PerShipping Carton Key Availability
12'8"Lengths
Cut ToLength
Lineal Feet Per Shipping
Carton 12'8" Lengths A B C D E F G
9 300 TBA 3800 ■ ■ ■ ■ ■ ■
12 225 TBA 2850 ■ ■ ■ ■ ■ ■ ■
15.5 175 TBA 2217 ■ ■ ■ ■ ■ ■
LPXC Spacer uses LPD Keys and Connectors.Available with pre-inserted connectors for bending equipment on request.
L P X C A I R S P A C E R w / C U P SA N D A V A I L A B L E K E Y S
A N D C O N N E C T O R S
LPXC Air Spacer w/ Cups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-96LPXC Air Spacer w/ Cups Specifications . . . . . . . . . . . . . . . . . . .A-97LPXC Air Spacer w/ Cups Key Availability . . . . . . . . . . . . . . . . .A-98LPXC Aluminum Air Spacer w/ Cups Fractional . . . . . . . . . . . .A-99
A 95
A 96
LPXC Air Spacer w/ Cups
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Notes:1. Dimensions are in decimal inches; dimensions in [] brackets are in mm.2. Material tolerances can be found on Material Specifications Data page (ii).3. Thermal properties can be found on Thermal Performance Data page (iii).
Perforated(1/4" [6.5mm] and wider)
Zippered(all sizes)
IN MM IN MM IN MM.014" [.36mm] Anodized Aluminum .245 6.22 .183 4.65 .014 .36.016" [.41mm] Anodized Aluminum .255 6.48 .195 4.95 .016 .41
H Hs TMa teria l
A
B
.0180.46
Hs H
.0300.76
.0290.74
T
R .0050.13
R +T .010 [.25]
4 PLCS
4 PLCS
A
B
2*TT
.0300.76
.0290.74
.0180.46
Hs H
A/4R +T .010 [.25]4 PLCS
R .0050.13
4 PLCS
R .0621.57
R .0621.57
.0040.10
.0040.10
Tolerance: All dimensions .005 [.13 mm] unless otherwise specified.
26° 26°
A 97
LPXC Air Spacer w/ Cups SpecificationsAluminum: Clear Anodized, Color In™ Anodized & Mill Finish
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
1/4 .250 .1315/16 .313 .1943/8 .375 .2567/16 .438 .3191/2 .500 .3819/16 .563 .4445/8 .625 .506
11/16 .688 .5693/4 .750 .631
Air SpacerWidth
Fractional
Decimal Equivalent
A B
A 98
LPXC Air Spacer w/ Cups Key Availability
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
A–LPD Fixed B–LPD Folding C–LPD WA
D–LPD BI E–LPD Flex F–LPD Straight Connector
G–LPD Straight Connector PD
LPXC Spacer w/ Cups uses LPD Keys and Connectors.
A 99
LPXC Air Spacer w/ CupsAluminum: Clear Anodized, Color In™ Anodized & Mill Finish
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Air Spacer WidthFractional
Pieces PerShipping Carton Key Availability
12'8" Lengths
Lineal Feet Per Shipping
Carton 12'8" Lengths A B C D E F G
1/4 400 5067 ■ ■ ■ ■ ■ ■ ■
5/16 350 4433 ■ ■ ■ ■ ■ ■ ■
3/8 275 3483 ■ ■ ■ ■ ■ ■ ■
7/16 250 3167 ■ ■ ■ ■ ■ ■ ■
1/2 225 2850 ■ ■ ■ ■ ■ ■ ■
9/16 200 2533 ■ ■ ■ ■ ■ ■ ■
5/8 175 2217 ■ ■ ■ ■ ■ ■ ■
11/16 150 1900 ■ ■ ■ ■ ■ ■
3/4 140 1773 ■ ■ ■ ■ ■ ■
LPXC Spacer w/ Cups uses LPD Keys and Connectors.Available with pre-inserted connectors for bending equipment on request.
2 5 0 P A I R S P A C E RA N D A V A I L A B L E K E Y S
A N D C O N N E C T O R S
250P Air Spacer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-102
250P Air Spacer Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . .A-103
250P Air Spacer Key Availability . . . . . . . . . . . . . . . . . . . . . . . . .A-104
250P Aluminum Air Spacer Fractional . . . . . . . . . . . . . . . . . . . .A-105
250P Aluminum Air Spacer Millimeter . . . . . . . . . . . . . . . . . . . .A-106
250P Steel Electro Galvanized Air Spacer Fractional . . . . . . . .A-107
250P Steel Electro Galvanized Air Spacer Millimeter . . . . . . .A-108
250P Steel Hi-Q Air Spacer Fractional (.008) . . . . . . . . . . . . . . .A-109
250P Steel Hi-Q Air Spacer Fractional (.012) . . . . . . . . . . . . . . . .A-110
250P Steel Hi-Q Air Spacer Millimeter (.012) . . . . . . . . . . . . . . .A-111
A 101
A 102
250P Air Spacer
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
R +T .010 [.25]
A
Hs H
B .0320.81
.0401.02
R .0050.13
4 PLCS
2*T
4 PLCSA/64 PLCS
CoinedSerrations(optional)
A
Hs H
.0401.02
.0320.81B
R .0050.13
4 PLCS
R +T .010 [.25]
T
Perforated(1/4" [6.5mm] and wider)
Zippered(all sizes)
CoinedSerrations(optional)
T
Notes:
1. Dimensions are in decimal inches; dimensions in [] brackets are in mm.2. Available with serrations at no extra charge on inside of Aluminum spacer at
3. Material tolerances can be found on Material Specifications Data page (ii).4. Thermal properties can be found on Thermal Performance Data page (iii).
location indicated above; not recommended for spacer to be used for bending.
IN MM IN MM IN MM.008" [.20mm] Hi-Q Steel
Hi-Q Steel
.302 7.67 .240 6.10 .008 .20.010" [.25mm] Anodized Aluminum .305 7.75 .244 6.20 .010 .25.012" [.30mm] .307 7.80 .246 6.25 .012 .30.014" [.36mm] EG Steel .311 7.90 .248 6.30 .014 .36.014" [.36mm] Anodized Aluminum .311 7.90 .248 6.30 .014 .36.015" [.38mm] Black Steel .313 7.95 .249 6.32 .015 .38.016" [.41mm] Anodized Aluminum .315 8.00 .250 6.35 .016 .41.016" [.41mm] Mill Finish Aluminum .315 8.00 .250 6.35 .016 .41.0185" [.47mm] Mill Finish Aluminum .320 8.13 .252 6.40 .019 .47
H Hs TMa terial
Tolerance: All dimensions .005 [.13 mm] unless otherwise specified.
26° 26°
A 103
3/16 .187 .0437/32 .219 .07515/64 .234 .0901/4 .250 .106
17/64 .266 .1269/32 .281 .13719/64 .297 .1535/16 .313 .16911/32 .344 .20023/64 .359 .2153/8 .375 .231
25/64 .391 .24713/32 .406 .2627/16 .438 .29429/64 .453 .30915/32 .469 .32531/64 .484 .3401/2 .500 .356
33/64 .516 .37217/32 .531 .38735/64 .547 .4039/16 .563 .41919/32 .594 .45039/64 .609 .4655/8 .625 .481
21/32 .656 .51243/64 .672 .52811/16 .688 .54445/64 .703 .55923/32 .719 .5773/4 .750 .606
25/32 .781 .63713/16 .813 .66927/32 .844 .7007/8 .875 .731
1 1.000 .8561 1/16 1.063 .919
4.7 .191 .0475 .197 .053
5.5 .217 .0736 .236 .092
6.5 .256 .1127 .276 .132
7.5 .295 .1518 .315 .1719 .354 .210
9.5 .374 .23010 .394 .250
10.5 .413 .27911 .433 .289
11.5 .453 .30912 .472 .328
12.5 .492 .34813 .512 .368
13.2 .520 .37613.5 .531 .38714 .551 .407
14.5 .571 .42715 .591 .447
15.5 .610 .46616 .630 .486.17 .669 .52517.5 .689 .54518 .709 .565
18.5 .728 .58419 .748 .604
19.5 .768 .62420 .787 .643
20.5 .807 .66321 .827 .68322 .866 .72223 .906 .762
25.4 1.000 .856
250P Air Spacer Specifications
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Air SpacerWidth
Fractional
Decimal Equivalent
A B
Air SpacerWidth
Millimeter
Decimal Equivalent
A B
A 104
250P Air Spacer Key Availability
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
A–Trimline Fixed w/ Fin B–Trimline Ultra-Loc WA C–Trimline Ultra-Loc BI
D–MP Straight Connector E–MP Straight Connector PD F–250P Straight Connector PD
G–MP Flex w/ Hook H–MP Flex w/ Fin I–250P Kronenberg Connector
A 105
250P Air SpacerAluminum: Clear Anodized, Color In™ Anodized & Mill Finish
Air Spacer WidthFractional
Pieces PerShipping Carton Key Availability
12'8"Lengths
Cut ToLength
Lineal Feet Per Shipping
Carton 12'8" Lengths A B C D E F G H I
3/16 500 500 6333 n n n n n n n
7/32 400 400 5067 n n n n n n
15/64 350 1000 4433 n n n
1/4 350 1000 4433 n n n n n n n n
17/64 325 900 4117 n n n n n
9/32 250 800 3167 n n n n n n n n
19/64 250 800 3167 n n n n n n
5/16 250 800 3167 n n n n n n n n
11/32 250 800 3167 n n n n n n n n
23/64 250 800 3167 n n n n n n n
3/8 200 650 2533 n n n n n n n n
25/64 200 650 2533 n n n n
13/32 200 650 2533 n n n n n n n
7/16 175 500 2217 n n n n n n n n
29/64 175 500 2217 n n n n
15/32 175 500 2217 n n n n n n n n
31/64 175 500 2217 n n n n
1/2 175 500 2217 n n n n n n n n n
33/64 160 450 2027 n n n n n
17/32 160 450 2027 n n n n n n n
35/64 150 400 1900 n n n n n
9/16 150 400 1900 n n n n n n n
19/32 140 375 1773 n n n n n n n
39/64 140 375 1773 n n n n n n
5/8 130 350 1647 n n n n n n n
21/32 130 350 1647 n n n n n n n
43/64 120 325 1520 n n n n
11/16 120 325 1520 n n n n n n n
45/64 110 300 1393 n n n n
23/32 110 300 1393 n n n n n n
3/4 100 300 1267 n n n n n n n
25/32 100 300 1267 n n n n n
13/16 100 300 1267 n n n n n n
7/8 75 275 950 n
1 75 275 950 n n
1 1/16 60 200 760 n
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Available with pre-inserted connectors for bending equipment on request.
A 106
250P Air SpacerAluminum: Clear Anodized, Color In™ Anodized & Mill Finish
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Air Spacer WidthMillimeter
Pieces PerShipping Carton Key Availability
12'8"Lengths
Cut ToLength
Lineal Feet Per Shipping
Carton 12'8" Lengths A B C D E F G H I
4.7 400 400 5067 n n
5 400 400 5067 n n n n n
5.5 350 1000 4433 n n n n n n
6 350 1000 4433 n n n n n n
6.5 350 1000 4433 n n n n n n n n
7 250 800 3167 n n n n n n n n
7.5 250 800 3167 n n n n n n
8 250 800 3167 n n n n n n n n
9 250 800 3167 n n n n n n n
9.5 200 800 2533 n n n n n n n n
10 175 500 2217 n n n n
10.5 175 500 2217 n n n n n n n
11 175 500 2217 n n n n n n n n
11.5 175 500 2217 n n n n
12 175 500 2217 n n n n n n n n
12.5 170 450 2153 n n n n
13 170 450 2153 n n n n n n n n
13.5 160 450 2027 n n n n n n
14 150 430 1900 n n n n n n n
14.5 150 430 1900 n n n n n n
15 150 430 1900 n n n n n n
15.5 150 430 1900 n n n n n n n
16 130 350 1647 n n n n n n n
17 130 350 1647 n n n n n
17.5 130 350 1647 n n n n n n n
18 120 325 1520 n n n n
18.5 120 325 1520 n n n n n n
19 100 300 1267 n n n n n n n
20 100 300 1267 n n n n n
20.5 100 300 1267 n n n n n n
22 75 275 950 n
25.4 60 200 760 n n
Available with pre-inserted connectors for bending equipment on request.
A 107
250P Air SpacerSteel: Electro Galvanized and Black
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Air Spacer WidthFractional
Pieces PerShipping Carton Key Availability
12'8"Lengths
Cut ToLength
Lineal Feet Per Shipping
Carton 12'8" Lengths A B C D E F G H I
3/16 250 TBA 3167 n n n n n n n n
7/32 200 TBA 2533 n n n n n n n
15/64 175 175 2217 n n n
1/4 175 175 2217 n n n n n n n n n
17/64 160 TBA 2027 n n n n n
9/32 125 125 1583 n n n n n n n n
19/64 125 TBA 1583 n n n n n n
5/16 125 125 1583 n n n n n n n n n
11/32 125 TBA 1583 n n n n n n n n
23/64 125 125 1583 n n n n n n n
3/8 100 100 1267 n n n n n n n n
25/64 100 TBA 1267 n n n n
13/32 100 TBA 1267 n n n n n n
7/16 85 85 1077 n n n n n n n n
29/64 85 TBA 1077 n n n n
15/32 85 TBA 1077 n n n n n n n
31/64 85 TBA 1077 n n n n
1/2 85 85 1077 n n n n n n n n
33/64 80 TBA 1013 n n n n n
17/32 80 TBA 1013 n n n n n n
35/64 75 TBA 950 n n n n n
9/16 75 75 950 n n n n n n n
19/32 70 TBA 887 n n n n n n
39/64 70 TBA 887 n n n n n n
5/8 65 65 823 n n n n n n n
21/32 65 65 823 n n n n n n
43/64 60 TBA 760 n n n n
11/16 60 60 760 n n n n n n n
45/64 55 TBA 697 n n n n
23/32 55 55 697 n n n n n
3/4 50 50 633 n n n n n n n
25/32 50 50 633 n n n n n
13/16 50 TBA 633 n n n n n n
7/8 40 TBA 507 n
1 40 TBA 507 n n
1 1/16 30 TBA 380 n
Available with pre-inserted connectors for bending equipment on request.
250P Air SpacerSteel: Electro Galvanized and Black
A 108 Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
5.5 200 2533 n n n n n n n
6 175 2217 n n n n n n
7 125 1583 n n n n n n n n
8 125 1583 n n n n n n n n n
10 100 1267 n n n n
12 90 1140 n n n n n n n
14 75 950 n n n n n n n
16 65 823 n n n n n n n
18 60 760 n n n n
19 50 633 n n n n n n n
20 50 633 n n n n n
Key AvailabilityLineal Feet Per Shipping
Carton 12'8" Lengths A B C D E F G H I
Pieces PerShipping Carton
12'8" Lengths
Air Spacer WidthMillimeter
Available with pre-inserted connectors for bending equipment on request.
250P Air SpacerSteel: Hi Q in .008
A 109Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Key AvailabilityLineal Feet Per Shipping
Carton 12'8" Lengths A B C D E F G H
1/4 175 2217 n n n n n n n n
5/16 125 1583 n n n n n n n n
3/8 100 1267 n n n n n n n n
7/16 100 1267 n n n n n n n n
Pieces PerShipping Carton
12'8" Lengths
Air Spacer WidthFractional
Available with pre-inserted connectors for bending equipment on request.
A 110
250P Air SpacerSteel: Hi Q in .012
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Key AvailabilityLineal Feet Per Shipping
Carton 12'8" Lengths A B C D E F G H
3/16 250 3167 n n n n n n n
9/16 80 1013 n n n n n n n
Pieces PerShipping Carton
12'8" Lengths
Air Spacer WidthFractional
Available with pre-inserted connectors for bending equipment on request.
A 111Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
250P Air SpacerSteel: Hi Q in .012
Key AvailabilityLineal Feet Per Shipping
Carton 12'8" Lengths A B C D E F G H
6 175 2217 n n n n n n
7 150 1900 n n n n n n n
8 120 1520 n n n n n n n n
Pieces PerShipping Carton
12'8" Lengths
Air Spacer WidthMillimeter
Available with pre-inserted connectors for bending equipment on request.
B U T Y L B E A D A I R S P A C E RA N D A V A I L A B L E K E Y S
Butyl Bead Air Spacer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-114Butyl Bead Air Spacer Specifications . . . . . . . . . . . . . . . . . . . . . .A-115Butyl Bead Air Spacer Key Availability . . . . . . . . . . . . . . . . . . . .A-116Butyl Bead Aluminum Air Spacer Fractional . . . . . . . . . . . . . . .A-117
A 113
A 114
Butyl Bead Air Spacer
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
IN MM IN MM IN MM.012" [.30mm] Hi-Q Steel .317 8.05 .206 5.23 .012 .30.014" [.36mm] Anodized Aluminum .321 8.15 .208 5.28 .014 .36.016" [.41mm] Anodized Aluminum .325 8.26 .210 5.33 .016 .41
H Hs TMaterial
A
B
HsH
Hs
A
B
2*T
R .0050.13
4 PLCS
R .0050.13
4 PLCS.0320.81
.0180.46
A/6
.0320.81.0180.46
CoinedSerrations(optional)
T T
.0160.40
H
CoinedSerrations(optional)
R +T .010 [.25]
R +T .010 [.25]
4 PLCS 4 PLCS.0160.40
Notes:1. Dimensions are in decimal inches; dimensions in [] brackets are in mm.2. Available with serrations at no extra charge on inside of Aluminum spacer at
3. Material tolerances can be found on Material Specifications Data page (ii).4. Thermal properties can be found on Thermal Performance Data page (iii).
location indicated above;not recommended for spacer to be used for bending.
Perforated(1/4" [6.5mm] and wider)
Zippered(all sizes)
Tolerance: All dimensions .005 [.13 mm] unless otherwise specified.
9° 9°
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
A 115
Butyl Bead Air Spacer Specifications
3/16 .188 .0887/32 .219 .11915/64 .234 .1341/4 .250 .150
19/64 .297 .1975/16 .313 .21311/32 .344 .24423/64 .359 .2593/8 .375 .275
13/32 .406 .30627/64 .422 .3227/16 .438 .33815/32 .469 .36931/64 .484 .3841/2 .500 .4009/16 .563 .463 19/32 .594 .49439/64 .609 .5095/8 .625 .525
41/64 .641 .54143/64 .672 .57211/16 .681 .68823/32 .719 .61947/64 .734 .6343/4 .750 .650
25/32 .781 .68151/64 .797 .69713/16 .813 .713
Air SpacerWidth
Fractional
Decimal Equivalent
A B
A 116
Butyl Bead Air Spacer Key Availability
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
A–Butyl Bead Ultra-LocWA w/ Vent
B–Butyl Bead Ultra-Loc BI
A 117
Butyl Bead Air SpacerAluminum: Clear Anodized, Color In™ Anodized & Mill Finish
Air Spacer WidthFractional
Pieces PerShipping Carton Key
Availability12'8"
LengthsCut ToLength
Lineal Feet Per Shipping
Carton 12'8" Lengths A B
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
3/16 500 TBA 63337/32 350 1000 4433 ■ ■
15/64 350 1000 4433 ■ ■
1/4 350 1000 4433 ■ ■
19/64 250 800 3167 ■ ■
5/16 250 800 3167 ■ ■
11/32 250 700 3167 ■ ■
23/64 200 700 2533 ■ ■
3/8 200 650 2533 ■ ■
13/32 190 600 2407 ■ ■
27/64 175 500 2217 ■ ■
7/16 175 500 2217 ■ ■
15/32 175 500 2217 ■ ■
31/64 175 500 2217 ■ ■
1/2 175 400 2217 ■ ■
9/16 150 400 1900 ■ ■
19/32 140 375 1773 ■ ■
39/64 130 350 1647 ■ ■
5/8 130 350 1647 ■ ■
41/64 125 325 1583 ■ ■
43/64 120 325 1520 ■ ■
11/16 120 325 1520 ■ ■
23/32 110 300 1393 ■ ■
47/64 100 300 1267 ■ ■
3/4 100 300 1267 ■ ■
25/32 100 300 1267 ■ ■
51/64 100 300 1267 ■ ■
13/16 100 300 1267 ■ ■
D L S A I R S P A C E RA N D A V A I L A B L E K E Y S
A N D C O N N E C T O R S
DLS Air Spacer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-120DLS Air Spacer Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-121DLS Air Spacer Key Availability . . . . . . . . . . . . . . . . . . . . . . . . . .A-122DLS Aluminum Air Spacer Fractional . . . . . . . . . . . . . . . . . . . . .A-123DLS Aluminum Air Spacer Millimeter . . . . . . . . . . . . . . . . . . . .A-124
A 119
A 120
DLS Air Spacer
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
IN MM IN MM IN MM.016" [.41mm] Anodized Aluminum .315 8.00 .250 6.35 .016 .41
H Hs TMaterial
(A-C)/2A
C
.0401.02
.0320.81
C-.004[C-.10]
B
.1403.57
.1423.61
Hs H
(A-C-.140)/2[(A-C-3.56)/2]
26R .005
0.13
R +T .010 [.25]4 PLCS
4 PLCS
Perfs. centered on each surface
Notes:1. Dimensions are in decimal inches; dimensions in [] brackets are in mm.2. Material tolerances can be found on Material Specifications Data page (ii).3. Thermal properties can be found on Thermal Performance Data page (iii).
Tolerance: All dimensions .005 [.13 mm] unless otherwise specified.
A 121
DLS Air Spacer Specifications
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
1/2 .500 .356 .1309/16 .562 .418 .1925/8 .625 .482 .130
11/16 .688 .544 .3183/4 .750 .606 .130
11.5 .454 .310 .130
Air SpacerWidth
Fractional
Decimal Equivalent
A B C
Air SpacerWidth
Millimeter
Decimal Equivalent
A B C
A 122
DLS Air Spacer Key Availability
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
C–DLS BI
D–DLS Folding E–DLS Straight Connector
A–DLS Fixed B–DLS WA
F–DLS Straight Connector PD
A 123
DLS Air SpacerAluminum: Clear Anodized, Color In™ Anodized & Mill Finish
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Air Spacer WidthFractional
Pieces PerShipping Carton Key Availability
12'8"Lengths
Cut ToLength
Lineal Feet Per Shipping
Carton 12'8" Lengths A B C D E F
1/2 175 TBA 2217 ■ ■ ■ ■
9/16 150 TBA 1900 ■ ■
5/8 130 350 1647 ■ ■ ■ ■
11/16 120 TBA 1520 ■ ■
3/4 100 300 1267 ■ ■ ■ ■ ■ ■
Available with pre-inserted connectors for bending equipment on request.
A 124
DLS Air SpacerAluminum: Clear Anodized, Color In™ Anodized & Mill Finish
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Available with pre-inserted connectors for bending equipment on request.
Air Spacer WidthMillimeter
Pieces PerShipping Carton Key Availability
12'8"Lengths
Cut ToLength
Lineal Feet Per Shipping
Carton 12'8" Lengths A B C D E F
11.5 175 TBA 2217 ■ ■
S T A I N L E S S S T E E LA I R S P A C E R
A N D A V A I L A B L E K E Y SA N D C O N N E C T O R S
LPX .008 Stainless Steel Air Spacer . . . . . . . . . . . .B-1
LPD .008 Stainless Steel Air Spacer . . . . . . . . . . . .B-7
Standard .008 Stainless Steel Air Spacer . . . . . . .B-13
250P .008 Stainless Steel Air Spacer . . . . . . . . . . .B-19
LPS1 .006 Stainless Steel Air Spacer . . . . . . . . . .B-25
L P X . 0 0 8 S T A I N L E S S S T E E L A I R S P A C E R
A N D A V A I L A B L E K E Y SA N D C O N N E C T O R S
LPX .008 Stainless Steel Air Spacer . . . . . . . . . . . . . . . . . . . . . . . . . .B-2
LPX .008 Stainless Steel Air Spacer Specifications . . . . . . . . . . . . .B-3
LPX .008 Stainless Steel Air Spacer Key Availability . . . . . . . . . . .B-4
LPX .008 Stainless Steel Air Spacer Fractional . . . . . . . . . . . . . . . .B-5
LPX .008 Stainless Steel Air Spacer Millimeter . . . . . . . . . . . . . . . .B-6
B-1
B-2 Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Notes:
1. Dimensio ns are in decimal inches; dime nsions in [] brackets are in mm .
2. Material to lerances can be fo und on Material Speci fica tions Data page (ii).
3. Thermal properties can be found on Thermal Performance Data page (iii).
IN MM IN MM IN MM H Hs T
Material
.008" [.20 mm] Stainless Steel
4. Perforations Only. No Serration.
.240 6.10 .180 4.57 .008 .20
Tole ra nce: Al l dimensions + .005 [.13mm] unless otherwise specifie d
.0290.74
.0300.76
H
A
B
Perforated(1/4" [6.5mm] and wider)
Hs
A/4
T
R .0300.76
4 PLCS
R .0160.41
4 PLCS 26°
.0180.46
-
LPX .008 Stainless Steel Air Spacer
B-3
LPX .008 Stainless Steel Air Spacer Specifications
-
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
3/16 .188 .0687/32 .219 .0991/4 .250 .1309/32 .281 .1615/16 .313 .19321/64 .328 .20911/32 .344 .2243/8 .375 .255
13/32 .406 .2867/16 .438 .31815/32 .469 .3491/2 .500 .380
17/32 .531 .4119/16 .563 .44319/32 .594 .4745/8 .625 .505
21/32 .656 .53611/16 .688 .56823/32 .719 .5993/4 .750 .630
13/16 .813 .693
5 .197 .0775.5 .217 .0976 .236 .116
6.5 .256 .1377.5 .295 .1758 .315 .195
8.5 .335 .2168.9 .350 .2319 .354 .234
9.5 .374 .25410 .394 .274
10.5 .413 .29411 .433 .313
11.5 .453 .33312 .472 .352
12.5 .492 .37312.7 .500 .38113.5 .531 .41114 .551 .431
14.5 .571 .45115 .591 .471
15.4 .606 .48715.5 .610 .49017.5 .689 .56918.4 .724 .60518.5 .728 .60819 .748 .628
Air SpacerWidth
Fractional
Decimal Equivalent
A B
Air SpacerWidth
Millimeter
Decimal Equivalent
A B
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
B-4
LPX .008 Stainless Steel Air Spacer Key Availability
-
A–LPD Fixed B–LPD Folding C–LPD WA
E–LPD Flex F–LPD Straight Connector
G–LPD Straight Connector PD H–LPX Kronenberg Connector
D–LPD BI
B-5
LPX .008 Stainless Steel Air Spacer
-
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Air Spacer WidthFractional
Pieces PerShipping Carton Key Availability
12'8"Lengths
Lineal Feet Per Shipping
Carton 12'8" Lengths A B C
3/16 500 6333 ■ ■ ■ ■ ■ ■ ■ ■
7/32 500 6333 ■ ■ ■ ■ ■ ■ ■
1/4 400 5067 ■ ■ ■ ■ ■ ■ ■ ■
9/32 375 4750 ■ ■ ■ ■ ■ ■ ■ ■
5/16 350 4433 ■ ■ ■ ■ ■ ■ ■ ■
11/32 300 3800 ■ ■ ■ ■ ■ ■ ■ ■
3/8 275 3483 ■ ■ ■ ■ ■ ■ ■ ■
13/32 275 3483 ■ ■ ■ ■ ■ ■ ■ ■
7/16 250 3167 ■ ■ ■ ■ ■ ■ ■ ■
15/32 225 2850 ■ ■ ■ ■ ■ ■ ■ ■
1/2 225 2850 ■ ■ ■ ■ ■ ■ ■ ■
17/32 200 2533 ■ ■ ■ ■ ■ ■ ■ ■
9/16 200 2533 ■ ■ ■ ■ ■ ■ ■ ■
19/32 175 2217 ■ ■ ■ ■ ■ ■ ■
5/8 175 2217 ■ ■ ■ ■ ■ ■ ■ ■
21/32 160 2027 ■ ■ ■ ■ ■ ■ ■
11/16 150 1900 ■ ■ ■ ■ ■ ■ ■ ■
23/32 145 1837 ■ ■ ■ ■ ■ ■ ■
3/4 140 1733 ■ ■ ■ ■ ■ ■ ■ ■
Note: LPX Spacer uses LPD Straight Connectorsand LPX Kronenberg Connectors.Available with pre-inserted connectors for bending equipment on request.
D E F G H
B-6
LPX .008 Stainless Steel Air Spacer
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
-
Air Spacer WidthMillimeter
Pieces PerShipping Carton Key Availability
12'8"Lengths
Lineal Feet Per Shipping
Carton 12'8" Lengths A B C
5.5 475 6016 ■ ■ ■ ■ ■ ■ ■
6 400 5067 ■ ■ ■ ■ ■ ■ ■
6.5 400 5067 ■ ■ ■ ■ ■ ■ ■ ■
7.5 350 4433 ■ ■ ■ ■ ■ ■ ■
8 350 4433 ■ ■ ■ ■ ■ ■ ■ ■
9 300 3800 ■ ■ ■ ■ ■ ■ ■
9.5 275 3483 ■ ■ ■ ■ ■ ■ ■ ■
10 275 3483 ■ ■ ■ ■ ■ ■ ■
10.5 250 3167 ■ ■ ■ ■ ■ ■ ■
11 250 3167 ■ ■ ■ ■ ■ ■ ■ ■
11.5 225 2850 ■ ■ ■ ■ ■ ■ ■
12 225 2850 ■ ■ ■ ■ ■ ■ ■ ■
12.5 225 2850 ■ ■ ■ ■ ■ ■ ■
13.5 200 2533 ■ ■ ■ ■ ■ ■ ■ ■
14 200 2533 ■ ■ ■ ■ ■ ■ ■
14.5 200 2533 ■ ■ ■ ■ ■ ■ ■ ■
15 175 2217 ■ ■ ■ ■ ■ ■ ■
15.5 175 2217 ■ ■ ■ ■ ■ ■ ■
16 175 2217 ■ ■ ■ ■ ■ ■ ■ ■
17.5 150 1900 ■ ■ ■ ■ ■ ■ ■ ■
18.5 140 1773 ■ ■ ■ ■ ■ ■ ■
19 125 1583 ■ ■ ■ ■ ■ ■ ■ ■
Note: LPX Spacer uses LPD Straight Connectors.Available with pre-inserted connectors for bending equipment on request.
D E F G H
L P D . 0 0 8 S T A I N L E S S S T E E LA I R S P A C E R
A N D A V A I L A B L E K E Y S
LPD .008 Stainless Steel Air Spacer . . . . . . . . . . . . . . . . . . . . . . . . . .B-8
LPD .008 Stainless Steel Air Spacer Specifications . . . . . . . . . . . . .B-9
LPD .008 Stainless Steel Air Spacer Key Availability . . . . . . . . . .B-10
LPD .008 Stainless Steel Aluminum Air Spacer Fractional . . . . .B-11
LPD .008 Stainless Steel Aluminum Air Spacer Millimeter . . . .B-12
B-7
B-8
LPD .008 Stainless Steel Air Spacer
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
-
A
B
HHs
.0080.20
Perforated(1/4" [6.5mm] and wider)
A/6
.0180.46
R .0260.66
6 PLCS
45°
T
.0601.52
Notes:
1. Dimensions are in decimal inches; dimensions in [] brackets are in mm.2. Material tolerances can be found on Material Specifications Data page (ii).3. Thermal properties can be found on Thermal Performance Data page (iii).
IN MM IN MM IN MMH Hs TMaterial
.008" [.20 mm] Stainless Steel
4. Perforations Only. No Serration.
Tolerance: All dimensions + .005 [.13mm] unless otherwise specified
.224 5.69 .164 4.17 .008 .20
LPD .008 Stainless Steel Air Spacer Specifications
B-9
-
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
3/16 .188 .0687/32 .219 .0991/4 .250 .130
17/64 .266 .1469/32 .281 .1615/16 .313 .19311/32 .344 .22423/64 .359 .2393/8 .375 .255
13/32 .406 .2867/16 .438 .31829/64 .453 .33315/32 .469 .34931/64 .484 .3641/2 .500 .380
17/32 .531 .4119/16 .563 .44319/32 .594 .4745/8 .625 .505
21/32 .656 .53611/16 .688 .56823/32 .719 .5993/4 .750 .630
25/32 .781 .66113/16 .813 .693
5.5 .217 .0976 .236 .1167 .276 .156
7.5 .295 .1758 .315 .1959 .354 .234
9.5 .374 .25410 .394 .27411 .433 .313
11.5 .453 .33312 .472 .35213 .512 .392
13.2 .520 .40013.5 .531 .41114 .551 .431
14.5 .571 .45115 .591 .471
15.5 .610 .49016 .630 .510
16.5 .650 .53017 .669 .549
17.5 .689 .56918.5 .728 .60819 .748 .628
19.5 .768 .64820 .787 .667
Air SpacerWidth
Fractional
Decimal Equivalent
A B
Air SpacerWidth
Millimeter
Decimal Equivalent
A B
B-10
LPD .008 Stainless Steel Air Spacer Key Availability
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
-
A–LPD Fixed B–LPD Folding C–LPD WA
E–LPD Flex F–LPD Straight Connector
G–LPD Straight Connector PD H–LPD Kronenberg Connector
D–LPD BI
B-11
-
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Air Spacer WidthFractional
Pieces PerShipping Carton Key Availability
12'8"Lengths
Lineal Feet Per Shipping
Carton 12'8" Lengths A B C D E F G H
LPD Air Spacer.008 Stainless Steel
3/16 500 6333 ■ ■ ■ ■ ■ ■ ■ ■
7/32 500 6333 ■ ■ ■ ■ ■ ■ ■
1/4 400 5067 ■ ■ ■ ■ ■ ■ ■ ■
17/64 375 4750 ■ ■ ■ ■ ■ ■
9/32 375 4750 ■ ■ ■ ■ ■ ■ ■ ■
5/16 350 4433 ■ ■ ■ ■ ■ ■ ■ ■
11/32 300 3800 ■ ■ ■ ■ ■ ■ ■ ■
23/64 300 3800 ■ ■ ■ ■ ■ ■
3/8 275 3483 ■ ■ ■ ■ ■ ■ ■ ■
13/32 275 3483 ■ ■ ■ ■ ■ ■ ■ ■
7/16 250 3167 ■ ■ ■ ■ ■ ■ ■ ■
15/32 225 2850 ■ ■ ■ ■ ■ ■ ■ ■
1/2 225 2850 ■ ■ ■ ■ ■ ■ ■ ■
17/32 200 2533 ■ ■ ■ ■ ■ ■ ■ ■
9/16 200 2533 ■ ■ ■ ■ ■ ■ ■ ■
19/32 175 2217 ■ ■ ■ ■ ■ ■ ■
5/8 175 2217 ■ ■ ■ ■ ■ ■ ■ ■
21/32 160 2027 ■ ■ ■ ■ ■ ■ ■
11/16 150 1900 ■ ■ ■ ■ ■ ■ ■ ■
23/32 145 1837 ■ ■ ■ ■ ■ ■ ■
3/4 140 1773 ■ ■ ■ ■ ■ ■ ■ ■
25/32 130 1647 ■ ■ ■ ■ ■ ■
13/16 125 1583 ■ ■ ■ ■ ■ ■
Available with pre-inserted connectors for bending equipment on request.
B-12 Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
-
Air Spacer WidthMillimeter
Pieces PerShipping Carton Key Availability
12'8"Lengths
Lineal Feet Per Shipping
Carton 12'8" Lengths A B C D E F G H
5.5 450 5700 ■ ■ ■ ■ ■ ■ ■
6 400 5067 ■ ■ ■ ■ ■ ■
7 375 4750 ■ ■ ■ ■ ■ ■ ■ ■
7.5 350 4433 ■ ■ ■ ■ ■ ■ ■
8 350 4433 ■ ■ ■ ■ ■ ■ ■ ■
9 300 3800 ■ ■ ■ ■ ■ ■ ■
9.5 275 3483 ■ ■ ■ ■ ■ ■ ■ ■
10 275 3483 ■ ■ ■ ■ ■ ■ ■
11 250 3167 ■ ■ ■ ■ ■ ■ ■ ■
11.5 225 2850 ■ ■ ■ ■ ■ ■ ■
12 225 2850 ■ ■ ■ ■ ■ ■ ■ ■
13 215 2724 ■ ■ ■ ■ ■ ■ ■
13.5 200 2533 ■ ■ ■ ■ ■ ■ ■
14 200 2533 ■ ■ ■ ■ ■ ■ ■
14.5 200 2533 ■ ■ ■ ■ ■ ■ ■ ■
15 175 2217 ■ ■ ■ ■ ■ ■ ■
15.5 175 2217 ■ ■ ■ ■ ■ ■ ■
16 175 2217 ■ ■ ■ ■ ■ ■ ■ ■
17 150 1900 ■ ■ ■ ■ ■ ■ ■
18.5 145 1837 ■ ■ ■ ■ ■ ■ ■
19 125 1583 ■ ■ ■ ■ ■ ■ ■ ■
19.5 125 1583 ■ ■ ■ ■ ■
20 125 1583 ■ ■ ■ ■ ■ ■
LPD Air Spacer.008 Stainless Steel
Available with pre-inserted connectors for bending equipment on request.
S T A N D A R D . 0 0 8 S T A I N L E S SS T E E L A I R S P A C E R
A N D A V A I L A B L E K E Y SA N D C O N N E C T O R S
Standard .008 Stainless Steel Air Spacer . . . . . . . . . . . . . . . . . . . .B-14
Standard .008 Stainless Steel Air Spacer Specifications . . . . . . . .B-15
Standard .008 Stainless Steel Air Spacer Key Availability . . . . . .B-16
Standard .008 Stainless Steel Air Spacer Fractional . . . . . . . . . . .B-17
Standard .008 Stainless Steel Air Spacer Millimeter . . . . . . . . . . .B-18
B–13
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
B–14
Standard Stainless Steel Air Spacer
-
IN MM IN MM IN MM .30 5 7 .75 . 185 4 .70 . 008 .2 0
H Hs TMaterial
Notes: 1. Dimensio ns are in decimal inches; di me nsions in [] brackets are in mm .
2. Material tolerances can be found on Material Speci fi cations Data page (i i).
3. Thermal prope rties c an be found on The rmal Performance Da ta page (iii).
4. Perforations Only. No Serration.
B
.0320.81
.0180.46
A
HsH
9°
A/6
T .0180.46
R .0300.76
4 PLCS
R .0160.41
4 PLCS
Perforated(1/4" [6.5mm] and wider)
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
3/16 .188 .0887/32 .219 .1191/4 .250 .150
17/64 .266 .1669/32 .281 .18119/64 .297 .1975/16 .313 .21311/32 .344 .24423/64 .359 .2593/8 .375 .275
13/32 .406 .3067/16 .438 .33815/32 .469 .3691/2 .500 .400
17/32 .531 .4319/16 .563 .46319/32 .594 .4945/8 .625 .525
21/32 .656 .55611/16 .688 .58823/32 .719 .6193/4 .750 .650
25/32 .781 .68113/16 .813 .71327/32 .844 .7447/8 .875 .775
Air SpacerWidth
Fractional
Decimal Equivalent
A B
Air SpacerWidth
Millimeter
Decimal Equivalent
A B
B–15
Standard Stainless Steel Air Spacer Specifications
-
5.5 .217 .1176 .236 .1367 .276 .176
7.5 .295 .1958 .315 .2159 .354 .25410 .394 .29411 .433 .333
11.5 .453 .35312 .472 .37213 .512 .412
13.2 .520 .42014 .551 .45115 .591 .491
15.5 .610 .51016 .630 .53017 .669 .569
17.5 .689 .58918 .709 .609
18.5 .728 .62819 .748 .64820 .787 .68722 .866 .766
B–16
Standard Stainless Steel Air Spacer Key Availability
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
-
B–Standard Fixed w/ FinA–Standard Fixed w/ Hook C–Standard Folding
D–Standard Ultra-Loc WA E–Standard Ultra-Loc BI
G–MP Flex w/ Fin
F–MP Flex w/ Hook
I–MP Straight Connector PDH–MP Straight Connector
J-Standard Kronenberg Connector
B–17
Standard Stainless Steel Air Spacer-
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Air Spacer WidthFractional
Pieces PerShipping Carton
Key Availability
12'8"Lengths
Lineal Feet Per Shipping
Carton 12'8" Lengths A B C D E F G H I J
3/16 500 6333 ■ ■ ■ ■ ■ ■ ■ ■ ■
7/32 400 5067 ■ ■ ■ ■ ■ ■ ■ ■
1/4 350 4333 ■ ■ ■ ■ ■ ■ ■ ■ ■
17/64 325 4117 ■ ■ ■ ■ ■ ■ ■
9/32 300 3800 ■ ■ ■ ■ ■ ■ ■ ■
19/64 250 3167 ■ ■ ■ ■ ■ ■ ■
5/16 250 3167 ■ ■ ■ ■ ■ ■ ■ ■ ■
11/32 250 3167 ■ ■ ■ ■ ■ ■ ■ ■
23/64 225 2850 ■ ■ ■ ■ ■ ■ ■ ■
3/8 200 2533 ■ ■ ■ ■ ■ ■ ■ ■ ■
13/32 200 2533 ■ ■ ■ ■ ■ ■ ■ ■
7/16 175 2217 ■ ■ ■ ■ ■ ■ ■ ■ ■
15/32 175 2217 ■ ■ ■ ■ ■ ■ ■ ■
1/2 175 2217 ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
17/32 160 2027 ■ ■ ■ ■ ■ ■ ■ ■
9/16 150 1900 ■ ■ ■ ■ ■ ■ ■ ■ ■
19/32 140 1773 ■ ■ ■ ■ ■ ■ ■
5/8 130 1647 ■ ■ ■ ■ ■ ■ ■ ■ ■
21/32 130 1647 ■ ■ ■ ■ ■ ■ ■
11/16 120 1520 ■ ■ ■ ■ ■ ■ ■ ■ ■
23/32 110 1393 ■ ■ ■ ■ ■ ■ ■
3/4 100 1267 ■ ■ ■ ■ ■ ■ ■ ■ ■
25/32 100 1267 ■ ■ ■ ■ ■ ■ ■
13/16 100 1267 ■ ■ ■ ■ ■ ■ ■
27/32 100 1267 ■ ■ ■
7/8 75 950 ■ ■ ■ ■ ■ ■
Available with pre-inserted connectors for bending equipment on request.
B–18
Standard Stainless Steel Air Spacer
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
-
Air Spacer WidthMillimeter
Pieces PerShipping Carton
Key Availability
12'8"Lengths
Lineal Feet Per Shipping
Carton 12'8" Lengths A B C D E F G H I J
5.5 400 5067 ■ ■ ■ ■ ■ ■ ■ ■
6 350 4433 ■ ■ ■ ■ ■ ■ ■ ■
7 250 3167 ■ ■ ■ ■ ■ ■ ■ ■
7.5 250 3167 ■ ■ ■ ■ ■ ■ ■
8 250 3167 ■ ■ ■ ■ ■ ■ ■ ■ ■
9 250 3167 ■ ■ ■ ■ ■ ■ ■ ■
10 190 2407 ■ ■ ■ ■ ■
11 175 2217 ■ ■ ■ ■ ■ ■ ■ ■ ■
11.5 175 2217 ■ ■ ■ ■ ■
12 175 2217 ■ ■ ■ ■ ■ ■ ■ ■
13 170 2153 ■ ■ ■ ■ ■ ■ ■ ■ ■
13.2 165 209014 150 1900 ■ ■ ■ ■ ■ ■ ■ ■ ■
15 140 1773 ■ ■ ■ ■ ■ ■ ■
15.5 130 1647 ■ ■ ■ ■ ■ ■ ■ ■ ■
16 130 1647 ■ ■ ■ ■ ■ ■ ■ ■ ■
17 130 1647 ■ ■ ■ ■ ■
18 120 1520 ■ ■ ■ ■
18.5 120 1520 ■ ■ ■ ■ ■ ■ ■
19 100 1267 ■ ■ ■ ■ ■ ■ ■ ■ ■
20 100 1267 ■ ■ ■ ■ ■ ■ ■
22 75 950 ■ ■ ■ ■ ■
Available with pre-inserted connectors for bending equipment on request.
2 5 0 P . 0 0 8 S T A I N L E S S S T E E LA I R S P A C E R
A N D A V A I L A B L E K E Y SA N D C O N N E C T O R S
250P .008 Stainless Steel Air Spacer . . . . . . . . . . . . . . . . . . . . . . . .B-20
250P .008 Stainless Steel Air Spacer Specifications . . . . . . . . . . . .B-21
250P .008 Stainless Steel Air Spacer Key Availability . . . . . . . . . .B-22
250P .008 Stainless Steel Air Spacer Fractional . . . . . . . . . . . . . . .B-23
250P .008 Stainless Steel Air Spacer Millimeter . . . . . . . . . . . . . .B-24
B 19
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Notes: 1. Dimensio ns are in decimal inches; di me nsions in [] brackets are in mm . 2. Material to lerances can be found on Material Speci fica tions Data page (ii).3. Thermal properties can be found on Thermal Performance Data page (iii).
IN MM IN MM IN MM .305 7. 75 .2 40 6. 10 .008 .2 0
H Hs TMaterial
.008" [.20mm] Stainless Steel
4. Perforations Only. No Serration.
A
B .0320.81
.0401.02
4 PLCS
Perforated(1/4" [6.5mm] and wider)
H
26°
T.0180.46
Hs
A/6
R .0300.76
R .0160.41
4 PLCS
B 20
-250P .008 Stainless Steel Air Spacer Specifications
B 21
-
3/16 .187 .0437/32 .219 .0751/4 .250 .106
17/64 .266 .1269/32 .281 .13719/64 .297 .1535/16 .313 .16911/32 .344 .20023/64 .359 .2153/8 .375 .231
13/32 .406 .2627/16 .438 .29415/32 .469 .3251/2 .500 .356
17/32 .531 .3879/16 .563 .41919/32 .594 .4505/8 .625 .481
21/32 .656 .51211/16 .688 .54423/32 .719 .5773/4 .750 .606
25/32 .781 .63713/16 .813 .6697/8 .875 .731
5.5 .217 .0736 .236 .092
6.5 .256 .1127 .276 .132
7.5 .295 .1518 .315 .1719 .354 .210
9.5 .374 .23010 .394 .250
10.5 .413 .27911 .433 .289
11.5 .453 .30912 .472 .328
12.5 .492 .34813 .512 .368
13.2 .520 .37613.5 .531 .38714 .551 .407
14.5 .571 .42715 .591 .447
15.5 .610 .46616 .630 .486.17 .669 .52517.5 .689 .54518 .709 .565
18.5 .728 .58419 .748 .604
19.5 .768 .62420 .787 .643
20.5 .807 .66321 .827 .68322 .866 .72223 .906 .762
250P .008 Stainless Steel Air Spacer Specifications
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Air SpacerWidth
Fractional
Decimal Equivalent
A B
Air SpacerWidth
Millimeter
Decimal Equivalent
A B
B 22
250P .008 Stainless Steel Air Spacer Key Availability
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
-
A–Trimline Fixed w/ Fin B–Trimline Ultra-Loc WA C–Trimline Ultra-Loc BI
D–MP Straight Connector E–MP Straight Connector PD* F–250P Straight Connector PD
G–MP Flex w/ Hook H–MP Flex w/ Fin I–250P Kronenberg Connector
*Limited availablity on smaller sizes.
B 23
250P .008 Stainless Steel Air Spacer-
Air Spacer WidthFractional
Pieces PerShipping Carton Key Availability
12'8"Lengths
Lineal Feet Per Shipping
Carton 12'8" Lengths A B C D E F G H I
3/16 500 6333 n n n n n n n
7/32 400 5067 n n n n n n
1/4 350 4433 n n n n n n n n
17/64 325 4117 n n n n n
9/32 250 3167 n n n n n n n n
19/64 250 3167 n n n n n n
5/16 250 3167 n n n n n n n n
11/32 250 3167 n n n n n n n n
23/64 250 3167 n n n n n n n
3/8 200 2533 n n n n n n n n
13/32 200 2533 n n n n n n n
7/16 175 2217 n n n n n n n n
15/32 175 2217 n n n n n n n n
1/2 175 2217 n n n n n n n n n
17/32 160 2027 n n n n n n n
9/16 150 1900 n n n n n n n
19/32 140 1773 n n n n n n n
5/8 130 1647 n n n n n n n
21/32 130 1647 n n n n n n n
11/16 120 1520 n n n n n n n
23/32 110 1393 n n n n n n
3/4 100 1267 n n n n n n n
25/32 100 1267 n n n n n
13/16 100 1267 n n n n n n
7/8 75 950 n
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Available with pre-inserted connectors for bending equipment on request.
B 24
250P .008 Stainless Steel Air Spacer
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
-
Air Spacer WidthMillimeter
Pieces PerShipping Carton Key Availability
12'8"Lengths
Lineal Feet Per Shipping
Carton 12'8" Lengths A B C D E F G H I
5.5 350 4433 n n n n n n
6 350 4433 n n n n n n
6.5 350 4433 n n n n n n n n
7 250 3167 n n n n n n n n
7.5 250 3167 n n n n n n
8 250 3167 n n n n n n n n
9 250 3167 n n n n n n n
9.5 200 2533 n n n n n n n n
10 175 2217 n n n n
10.5 175 2217 n n n n n n n
11 175 2217 n n n n n n n n
11.5 175 2217 n n n n
12 175 2217 n n n n n n n n
12.5 170 2153 n n n n
13 170 2153 n n n n n n n n
13.5 160 2027 n n n n n n
14 150 1900 n n n n n n n
14.5 150 1900 n n n n n n
15 150 1900 n n n n n n
15.5 150 1900 n n n n n n n
16 130 1647 n n n n n n n
17 130 1647 n n n n n
17.5 130 1647 n n n n n n n
18 120 1520 n n n n
18.5 120 1520 n n n n n n
19 100 1267 n n n n n n n
20 100 1267 n n n n n
20.5 100 1267 n n n n n n
22 75 950 n
Available with pre-inserted connectors for bending equipment on request.
L P S 1 . 0 0 6 S T A I N L E S S S T E E LA I R S P A C E R S A N D
K E Y S A N D C O N N E C T O R S
LPS1 .006 Stainless Steel Air Spacer . . . . . . . . . . . . . . . . . . . . . . . .B-26
LPS1 .006 Stainless Steel Air Spacer Specifications . . . . . . . . . . .B-27
LPS1 .006 Stainless Steel Air Spacer Key Availability . . . . . . . . .B-28
LPS1 .006 Stainless Steel Air Spacer Fractional . . . . . . . . . . . . . . .B-29
LPS1 .006 Stainless Steel Air Spacer Millimeter . . . . . . . . . . . . . .B-30
B 25
Notes: 1. Dimensio ns are in decimal inches; dime nsions in [] brackets are in mm .2. Material to lerances can be fo und on Material Speci fica tions Data page (ii).3. Thermal properties can be found on Thermal Performance Data page (iii).
IN MM IN MM IN MM H Hs TMaterial
.006" [.20 mm] Stainless Steel
4. Perforations Only. No Serration.
Tole ra nce: Al l dimensions + .005 [.13mm] unless otherwise specifie d
.0340.87
.0300.76
H
A
B
Perforated(1/4" [6.5mm] and wider)
Hs
R .0210.53
2 PLCS
R .0100.25
6 PLCS 26°
(A/2)-.109 [2.77] S
S
SECT S-S
.250 6.35 .180 4.57 .006 .15
B 26 Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
-
LPS1 .006 Stainless Steel Air Spacer
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
B 27
LPS1 .006 Stainless Steel Air Spacer Specifications
-
1/2 .500 .3729/16 .563 .4355/8 .625 .4973/4 .750 .622
7.5 .295 .1678.5 .334 .2069.5 .374 .24610.5 .413 .28511.5 .452 .32413.5 .531 .40315.5 .610 .48217.5 .689 .56119.5 .767 .639
Air SpacerWidth
Fractional
Decimal Equivalent
A B
Air SpacerWidth
Millimeter
Decimal Equivalent
A B
LPS1 .006 Stainless Steel Air Spacer Connector Availability
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
-
A–LPS Fixed Connector Key
B 28
B 29
LPS1 .006 Stainless Steel Air Spacer
-
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Air Spacer WidthFractional
Pieces PerShipping Carton
Key Availability
12'8"Lengths
Lineal Feet Per Shipping
Carton 12'8" Lengths A
1/2 225 2850 n
9/16 200 2533 n
5/8 175 2217 n
3/4 140 1773 n
Note: LPS1 Spacer uses LPD Straight Connectorsand LPX Kronenberg Connectors.Available with pre-inserted connectors for bending equipment on request.
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
B 30
LPS1 .006 Stainless Steel Air Spacer
-
Air Spacer WidthMillimeter
Pieces PerShipping Carton
12'8"Lengths
Lineal Feet Per Shipping
Carton 12'8" Lengths A
Note: LPS1 Spacer uses LPD Straight Connectors.Available with pre-inserted connectors for bending equipment on request.
7.5 350 4433 n
8.5 350 4433 n
9.5 275 3483 n
10.5 275 3483 n
11.5 225 2850 n
13.5 200 2533 n
15.5 175 2217 n
17.5 150 1900 n
19.5 125 1583 n
Key Availability
A I R S P A C E R K E Y SA N D C O N N E C T O R S
S E C T I O N C O N T E N T S
Standard Keys and Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-1
Multi-Purpose Keys and Connectors . . . . . . . . . . . . . . . . . . . . . . .C-17
Rectangular Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-27
Trimline Keys and Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-37
LPD Keys and Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-53
LPX Kronenberg Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-71
250P Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-75
Butyl Bead Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-81
DLS Keys and Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-87
LPS Fixed Corner Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-101
S T A N D A R D K E Y SA N D C O N N E C T O R S
Standard Fixed w/ Hook Specifications . . . . . . . . . . . . . . . . . . . . . . . . .C-2
Standard Fixed w/ Hook Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-3
Standard Fixed w/ Fin Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . .C-4
Standard Fixed w/ Fin Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-5
Standard Folding Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-6
Standard Folding Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-7
Standard Fixed w/ Fin 115° or 135° Specifications . . . . . . . . . . . . . . . .C-8
Standard Fixed w/ Fin 115° or 135° Packaging . . . . . . . . . . . . . . . . . . .C-9
Standard Ultra-Loc - WA Specifications . . . . . . . . . . . . . . . . . . . . . . . .C-10
Standard Ultra-Loc - WA Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . .C-11
Standard Ultra-Loc - BI Specifications . . . . . . . . . . . . . . . . . . . . . . . . .C-12
Standard Ultra-Loc - BI Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-13
Standard Kronenberg Connector Specifications . . . . . . . . . . . . . . . . .C-14
Standard Kronenberg Connector Packaging . . . . . . . . . . . . . . . . . . . .C-15
C–1
C–2
Standard Fixed w/ HookNylon
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
B
AC
.296(7.52mm)
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)C, ± .005 (.127mm)
3/16–5mm .188 .148 .1787/32–5.5mm .219 .179 .20915/64–6mm .236 .196 .2261/4–6.5mm .250 .210 .2409/32–7mm .281 .241 .2715/16–8mm .313 .273 .303
11/32 .344 .303 .33423/64–9mm .359 .319 .3493/8–9.5mm .375 .335 .365
13/32–10.5mm .406 .366 .3967/16–11mm .438 .398 .428
15/32–12mm .469 .432 .4581/2–13mm .500 .460 .490
17/32–14mm .531 .485 .5219/16–14.5mm .563 .516 .55339/64–15.5mm .610 .564 .600
5/8–16mm .625 .579 .61511/16–17.5mm .688 .642 .67823/32–18.5mm .719 .673 .708
3/4–19mm .750 .704 .74025/32–20mm .781 .741 .777
13/16–20.5mm .813 .767 .8037/8–22mm .875 .829 .865
Corner Key Size
DecimalEquivalent
Specification in Inches
A B
C–3
Standard Fixed w/ HookNylon
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Corner Key Size
Packaging Information
Small Carton Large CartonPart # Pieces Part # Pieces
3/16–5mm 126094 4000 126095 150007/32–5.5mm 126175 3200 126177 1200015/64–6mm 126183 3000 300230 100001/4–6.5mm 126189 2400 126184 100009/32–7mm 126343 2200 126344 80005/16–8mm 126347 2000 126345 6000
11/32 126454 1800 126453 550023/64–9mm 126459 1600 126458 55003/8–9.5mm 126466 1600 126460 5500
13/32–10.5mm 126580 1500 126581 50007/16–11mm 126594 1500 126582 5000
15/32–12mm 126675 1500 126677 50001/2–13mm 126681 1000 126679 4000
17/32–14mm 126842 1000 126839 40009/16–14.5mm 126849 1000 126846 4000
39/64 –15.5mm TBA 800 126934 32005/8–16mm 126943 800 126935 3200
11/16–17.5mm 127066 500 127065 300023/32–18.5mm TBA 500 127151 2800
3/4–19mm 127157 500 127152 250025/32–20mm 127239 500 127240 2500
13/16–20.5mm 127245 500 127241 25007/8–22mm 127262 500 127259 2000
Part numbers shown are natural nylon.
C–4
Standard Fixed w/ FinNylon
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
A
B
C.315
(8.00mm)
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)C, ± .005 (.127mm)
5/32–4mm .156 .116 .1463/16–5mm .188 .148 .178
7/32–5.5mm .219 .178 .20815/64–6mm .236 .196 .2261/4–6.5mm .250 .210 .240
17/64 .266 .226 .2569/32–7mm .281 .241 .271
19/64–7.5mm .297 .257 .2875/16–8mm .313 .273 .303
11/32 .344 .304 .33423/64–9mm .359 .319 .3443/8–9.5mm .375 .335 .365
25/64–10mm .394 .354 .38413/32–10.5mm .406 .366 .396
7/16–11mm .438 .397 .42729/64–11.5mm .453 .413 .44315/32–12mm .469 .428 .458
31/64–12.5mm .484 .444 .4741/2 .500 .456 .490
33/64–13mm .512 .472 .50217/32–13.5mm .531 .487 .52135/64–14mm .551 .511 .5419/16–14.5mm .563 .518 .55219/32–15mm .594 .550 .584
39/64–15.5mm .610 .570 .6005/8–16mm .625 .581 .615
21/32 .656 .612 .64643/64–17mm .669 .629 .659
11/16–17.5mm .688 .648 .67845/64–18mm .709 .669 .698
23/32–18.5mm .719 .674 .7083/4–19mm .750 .706 .740
49/64–19.5mm .766 .727 .75725/32–20mm .787 .741 .771
13/16–20.5mm .813 .769 .80327/32–21.5mm .844 .804 .834
7/8–22mm .875 .831 .865
Corner Key Size
DecimalEquivalent
Specification in Inches
A B
C–5
Standard Fixed w/ FinNylon
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Corner Key Size
Packaging Information
Small Carton Large CartonPart # Pieces Part # Pieces
5/32–4mm 127314 2800 127315 90003/16–5mm 127317 2600 127316 8000
7/32–5.5mm 127447 2000 127441 650015/64–6mm 127457 1800 127456 64001/4–6.5mm 300063 1700 127469 6200
17/64 TBA 1600 127680 58009/32–7mm 127681 1500 127682 5400
19/64–7.5mm 300530 1400 127688 46005/16–8mm 127697 1300 127696 4200
11/32 127837 1200 127836 400023/64–9mm 300531 1100 127841 38003/8–9.5mm 127845 1100 127846 3600
25/64–10mm 128007 1000 128009 350013/32–10.5mm 128012 900 128014 3400
7/16–11mm 128020 800 128018 320029/64–11.5mm TBA 700 128110 310015/32–12mm 128112 700 128111 3000
31/64–12.5mm TBA TBA TBA TBA1/2 300326 600 128128 2600
33/64–13mm 128319 600 302499 250017/32–13.5mm 300532 600 128321 240035/64–14mm 128328 600 128327 24009/16 –14.5mm 128335 600 128334 240019/32–15mm 128436 600 128437 2300
39/64–15.5mm 300533 500 128448 22005/8–16mm 128456 500 128452 2200
21/32 300782 500 128608 210043/64–17mm TBA 500 TBA 2000
11/16–17.5mm 128616 500 128617 200045/64–18mm 128680 500 128681 1900
23/32–18.5mm 128689 500 128683 19003/4–19mm 128691 500 128692 1800
49/64–19.5mm TBA 400 TBA 170025/32–20mm TBA 400 128821 1700
13/16–20.5mm 128825 400 128822 150027/32–21.5mm 302311 400 TBA 1500
7/8–22mm 128844 400 128839 1400
Part numbers shown are natural nylon.
C–6
Standard FoldingNylon
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
AC
B
.296(7.52mm)
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)C, ± .005 (.127mm)
3/16–5mm .188 .152 .1787/32–5.5mm .219 .178 .20815/64–6mm .236 .196 .2261/4–6.5mm .250 .210 .240
17/64 .266 .226 .2569/32–7mm .281 .241 .271
19/64–7.5mm .297 .256 .2865/16–8mm .313 .273 .303
11/32–8.5mm .344 .304 .33423/64–9mm .359 .319 .3493/8–9.5mm .375 .335 .365
25/64–10mm .391 .354 .38413/32–10.5mm .406 .366 .396
7/16–11mm .438 .398 .42829/64–11.5mm .453 .413 .44315/32–12mm .469 .428 .458
31/64–12.5mm .484 .444 .4741/2 .500 .460 .490
33/64–13mm .512 .475 .50517/32–13.5mm .531 .485 .52135/64–14mm .551 .505 .5479/16–14.5mm .563 .516 .55219/32–15mm .594 .548 .584
39/64–15.5mm .610 .564 .6005/8–16mm .625 .579 .615
21/32 .656 .610 .64643/64–17mm .672 .623 .659
11/16–17.5mm .688 .642 .67823/32–18.5mm .719 .672 .708
3/4–19mm .750 .704 .74025/32–20mm .781 .735 .771
Corner Key Size
DecimalEquivalent
Specification in Inches
A B
C–7Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Standard FoldingNylon
3/16–5mm 129220 1600 129217 50007/32–5.5mm 128883 1500 128879 450015/64–6mm 128888 1200 128889 42001/4–6.5mm 128906 1200 128890 4000
17/64 TBA 1100 128920 37009/32–7mm TBA 1100 128921 3500
19/64–7.5mm 128924 1000 128925 32005/16–8mm 128930 1000 128926 3200
11/32–8.5mm 300310 1000 128949 300023/64–9mm TBA 800 128952 28003/8–9.5mm 128971 800 128953 2500
25/64–10mm 301447 800 TBA 250013/32–10.5mm TBA 800 128985 2500
7/16–11mm 128988 700 128991 230029/64–11.5mm TBA 700 129008 220015/32–12mm TBA 700 129009 2100
31/64–12.5mm TBA TBA TBA 20001/2 129020 600 129017 1900
33/64–13mm 129062 600 129063 180017/32–13.5mm 129066 600 129064 180035/64–14mm TBA 600 129071 18009/16–14.5mm 129079 600 129072 180019/32–15mm 129104 500 129096 1600
39/64–15.5mm TBA 500 129107 16005/8–16mm 129124 500 129108 1600
21/32 TBA 500 129146 150043/64–17mm TBA 500 TBA 1500
11/16–17.5mm 129166 500 129150 150023/32–18.5mm TBA 400 129170 1300
3/4–19mm 129175 400 129174 130025/32–20mm 129206 400 129207 1200
Corner Key Size
Packaging Information
Small Carton Large CartonPart # Pieces Part # Pieces
Part numbers shown are natural nylon.
C–8
Standard Fixed w/ Fin 115° or 135°Nylon
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
B
.315(8mm)A
135˚or
115˚
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)C, ± .005 (.127mm)
1/4 x 115° .250 .210 .2401/4 x 135° .250 .210 .2401/2 x 135° .500 .456 .490
Corner Key Size
DecimalEquivalent
Specification in Inches
A B
C–9
Standard Fixed w/ Fin 115° or 135°Nylon
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Corner KeySize
Packaging Information
Small Carton Large CartonPart # Piece Count Part # Piece Count
1/4 x 115° 134925 1800 134926 64001/4 x 135° 134912 1800 134913 64001/2 x 135° 301522 900 134924 2700
Part numbers shown are natural nylon.
C–10
Standard Ultra-Loc WANylon and Glass-Filled
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
B
A.312
(7.92mm)
C
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)C, ± .005 (.127mm)
3/16–4.7mm .188 .148 .1785mm .197 .162 .192
7/32–5.5mm .219 .178 .20815/64–6mm .236 .196 .2261/4–6.5mm .250 .210 .240
17/64 .266 .226 .2569/32–7mm .281 .241 .271
19/64–7.5mm .297 .256 .2875/16–8mm .313 .273 .303
11/32 .344 .304 .33423/64–9mm .359 .314 .3443/8–9.5mm .375 .335 .365
25/64–10mm .391 .351 .38413/32–10.5mm .406 .363 .396
7/16–11mm .438 .397 .42729/64–11.5mm .453 .411 .44315/32–12mm .469 .425 .458
31/64–12.5mm .492 .441 .4761/2 .500 .456 .490
33/64–13mm .516 .468 .50217/32–13.5mm .531 .487 .52135/64–14mm .571 .507 .5419/16–14.5mm .563 .518 .55219/32–15mm .594 .550 .584
39/64–15.5mm .610 .566 .6005/8–16mm .625 .581 .615
21/32 .656 .612 .64643/64–17mm .669 .625 .659
11/16–17.5mm .688 .644 .67845/64–18mm .709 .664 .698
23/32–18.5mm .719 .674 .70847/64 .690 .690 .724
3/4–19mm .750 .706 .74049/64–19.5mm .766 .722 .75625/32–20mm .781 .737 .771
13/16–20.5mm .813 .769 .80327/32–21.5mm .844 .800 .834
7/8–22mm .875 .831 .865
Corner Key Size
DecimalEquivalent
Specification in Inches
A B
C 11
Standard Ultra-Loc WANylon and Glass Filled
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Corner KeySize
Packaging InformationNylon Carton Glass-Filled Carton
Part # Piece Count Part # Piece Count3/16 4.7mm 129259 5000 129411 5000
5mm TBA 5000 301791 50007/32 5.5mm TBA 4200 129424 420015/64 6mm 129274 3800 129428 38001/4 6.5mm 129280 3700 129437 3700
17/64 129297 3500 301255 35009/32 7mm TBA 3300 129457 3300
19/64 7.5mm 129298 3000 301256 30005/16 8mm 129299 3000 129468 3000
11/32 129308 2700 129494 270023/64 9mm 129309 2600 129499 26003/8 9.5mm 129313 2400 129504 2400
25/64 10mm TBA 2300 129517 230013/32 10.5mm 129332 2200 129521 2200
7/16 11mm 129333 1900 129522 190029/64 11.5mm TBA 1800 TBA 180015/32 12mm 129340 1800 129527 1800
31/64 12.5mm TBA TBA TBA TBA1/2 129345 1700 129533 1700
33/64 13mm 129369 1600 129536 160017/32 13.5mm 129370 1500 302578 150035/64 14mm 129371 1500 129538 15009/16 14.5mm 129372 1400 129539 140019/32 15mm 129379 1300 300026 1300
39/64 15.5mm 129381 1300 129540 13005/8 16mm 129384 1300 301793 1300
21/32 129392 1200 302895 120043/64 17mm 300568 1100 TBA 1100
11/16 17.5mm 129395 1100 300488 110045/64 18mm 300399 1100 TBA 1100
23/32 18.5mm 129399 1000 TBA 100047/64 TBA 1000 TBA 1000
3/4 19mm 129402 1000 129541 100049/64 19.5mm TBA TBA TBA TBA25/32 20mm TBA 900 TBA 900
13/16 20.5mm 302141 900 TBA 90027/32 21.5mm TBA 900 TBA 900
7/8 22mm 300466 900 300173 900
Part numbers shown are natural nylon.
C–12
Standard Ultra-Loc BINylon and Glass-Filled
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
B
A
.312(7.92mm)
C
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)C, ± .005 (.127mm)
3/16–4.7mm .188 .148 .1785mm .197 .162 .192
7/32–5.5mm .219 .178 .20815/64–6mm .236 .196 .2261/4–6.5mm .250 .210 .240
17/64 .266 .226 .2569/32–7mm .281 .241 .271
19/64–7.5mm .297 .256 .2875/16–8mm .313 .273 .303
11/32 .344 .304 .33423/64–9mm .359 .314 .3443/8–9.5mm .375 .335 .365
25/64–10mm .391 .351 .38413/32–10.5mm .406 .363 .396
7/16–11mm .438 .397 .42729/64–11.5mm .453 .411 .44315/32–12mm .469 .425 .458
31/64–12.5mm .492 .441 .4761/2 .500 .456 .490
33/64–13mm .516 .468 .50217/32–13.5mm .531 .487 .52135/64–14mm .551 .507 .5419/16–14.5mm .563 .518 .55219/32–15mm .594 .550 .584
39/64–15.5mm .610 .566 .6005/8–16mm .625 .581 .615
21/32 .656 .612 .64643/64–17mm .669 .625 .659
11/16–17.5mm .688 .644 .67845/64–18mm .709 .664 .698
23/32–18.5mm .719 .674 .70847/64 .734 .690 .724
3/4–19mm .750 .706 .74049/64–19.5mm .766 .722 .75625/32–20mm .781 .737 .771
13/16–20.5mm .813 .769 .80327/32–21.5mm .844 .800 .834
7/8–22mm .875 .831 .865
Corner Key Size
DecimalEquivalent
Specification in Inches
A B
C–13
Standard Ultra-Loc BINylon and Glass-Filled
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
3/16–4.7mm 129611 5000 TBA 50005mm TBA 5000 TBA 5000
7/32–5.5mm 129617 4200 TBA 420015/64–6mm 129619 3800 TBA 38001/4–6.5mm 129622 3700 129705 3700
17/64 129628 3500 TBA 35009/32–7mm 129630 3300 TBA 3300
19/64–7.5mm 129632 3000 TBA 30005/16–8mm 129634 3000 TBA 3000
11/32 129639 2700 TBA 270023/64–9mm TBA 2600 TBA 26003/8–9.5mm 129643 2400 129706 2400
25/64–10mm 129648 2300 TBA 230013/32–10.5mm 129651 2200 TBA 2200
7/16–11mm 129653 1900 TBA 190029/64–11.5mm TBA 1800 TBA 180015/32–12mm 129655 1800 TBA 1800
31/64–12.5mm TBA TBA TBA TBA1/2 129664 1700 129708 1700
33/64–13mm 129672 1600 TBA 160017/32–13.5mm 129674 1500 TBA 150035/64–14mm TBA 1500 TBA 15009/16–14.5mm 129677 1400 TBA 140019/32–15mm 129683 1300 TBA 1300
39/64–15.5mm 129686 1300 TBA 13005/8–16mm 129688 1300 TBA 1300
21/32 300936 1200 TBA 120043/64–17mm TBA 1100 TBA 1100
11/16–17.5mm 129693 1100 TBA 110045/64–18mm TBA 1100 TBA 1100
23/32–18.5mm 129694 1000 TBA 100047/64 TBA 1000 TBA 1000
3/4–19mm 129697 1000 TBA 100049/64–19.5mm TBA TBA TBA TBA25/32–20mm TBA 900 TBA 900
13/16 –20.5mm TBA 900 TBA 90027/32–21.5mm TBA 900 TBA 900
7/8–22mm TBA 900 TBA 900
Corner KeySize
Packaging Information
Nylon Carton Glass-Filled CartonPart # Piece Count Part # Piece Count
Part numbers shown are natural nylon.
C–14
Standard Kronenberg ConnectorSteel
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
2.36 (59.944mm)
ABC
TOLERANCEA, - .000 + .006B, - .000 + .006C, - .000 + .006
For Anodized Aluminum Air Spacer
1/2–13mm .500 .472 .480 .49239/64–15.5mm .609 .575 .579 .602
7/8–22mm .875 .854 .862 .870
Connector Size
DecimalEquivalent
Specification in Inches
A B C
C–15
Standard Kronenberg ConnectorSteel
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
For Anodized Aluminum Air Spacer
1/2–13mm 134776 250039/64–15.5mm 134777 2500
7/8–22mm 212863 1500
Connector Size
Packaging Information
Part # Pieces
M U L T I - P U R P O S EK E Y S A N D C O N N E C T O R S
MP Flex w/ Hook Specifications . . . . . . . . . . . . . . . . . . . . . . . . . .C-18
MP Flex w/ Hook Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-19
MP Flex w/ Fin Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-20
MP Flex w/ Fin Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-21
MP Straight Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-22
MP Straight Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-23
MP Straight Connector PD Specifications . . . . . . . . . . . . . . . . . . .C-24
MP Straight Connector PD Packaging . . . . . . . . . . . . . . . . . . . . . .C-25
C–17
C–18
MP Flex w/ HookNylon
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
B
A.296
(7.52mm)
C
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)C, ± .005 (.127mm)
3/16–5mm .188 .148 .1781/4–6.5mm .250 .196 .2405/16–8mm .313 .258 .3033/8–9.5mm .375 .321 .3657/16–11mm .438 .384 .4281/2–13mm .500 .446 .4909/16–14mm .563 .509 .5535/8–16mm .625 .571 .615
11/16–17.5mm .688 .634 .6783/4–19mm .750 .696 .740
Corner Key Size
DecimalEquivalent
Specification in Inches
A B
C–19
MP Flex w/ HookNylon
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
3/16–5mm 131358 4000 131362 150001/4–6.5mm 131371 3500 131372 100005/16–8mm 131410 2800 131413 80003/8–9.5mm 131432 2400 131434 65007/16–11mm 131466 1800 131464 55001/2–13mm 131480 1500 131482 45009/16–14mm 131540 1200 131543 40005/8–16mm 131559 1000 131558 3500
11/16–17.5mm 131609 800 131610 30003/4–19mm 131620 800 131622 2800
Corner Key Size
Packaging Information
Small Carton Large CartonPart # Pieces Part # Pieces
Part numbers shown are natural nylon.
C–20
MP Flex w/ FinNylon
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
B
A.291
(7.39mm)
C
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)C, ± .005 (.127mm)
3/16–5mm .188 .134 .1787/32–5.5mm .219 .164 .20815/64–6mm .236 .182 .2261/4–6.5mm .250 .196 .240
17/64 .266 .212 .2569/32–7mm .281 .227 .271
19/64–7.5mm .295 .242 .2855/16–8mm .313 .259 .303
11/32 .344 .290 .33423/64–9mm .359 .305 .3493/8–9.5mm .375 .321 .365
25/64–10mm .394 .340 .38413/32–10.5mm .406 .352 .396
7/16–11mm .438 .384 .42829/64–11.5mm .453 .399 .44315/32–12mm .469 .414 .458
31/64–12.5mm .484 .430 .4741/2 .500 .446 .490
33/64–13mm .512 .458 .50217/32–13.5mm .531 .477 .52135/64–14mm .551 .497 .5419/16–14.5mm .563 .509 .55319/32–15mm .594 .540 .584
39/64–15.5mm .610 .556 .6005/8–16mm .625 .571 .615
21/32 .656 .602 .64643/64–17mm .669 .615 .659
11/16–17.5mm .688 .634 .67845/64–18mm .709 .654 .698
23/32–18.5mm .719 .665 .7093/4–19mm .750 .696 .740
25/32–20mm .781 .727 .77113/16-20.5mm .813 .759 .803
Corner Key Size
DecimalEquivalent
Specification in Inches
A B
C 21
MP Flex w/ FinNylon
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
3/16 5mm 131651 2600 131652 80007/32 5.5mm 131678 2000 131682 650015/64 6mm 131684 1800 131683 64001/4 6.5mm 131692 1700 131691 6200
17/64 TBA 1600 301319 58009/32 7mm 131778 1500 131779 5400
19/64 7.5mm 131782 1400 131781 46005/16 8mm 131787 1300 131783 4200
11/32 131829 1200 131831 400023/64 9mm 300528 1100 131835 38003/8 9.5mm 131839 1100 131840 3600
25/64 10mm 131905 1000 131906 350013/32 10.5mm 131912 900 131909 3400
7/16 11mm 131915 800 131914 320029/64 11.5mm 131946 700 131947 310015/32 12mm 131949 700 131948 3000
31/64 12.5mm TBA TBA TBA TBA1/2 131966 600 131965 2600
33/64 13mm TBA 600 132082 250017/32 13.5mm 132090 600 132085 250035/64 14mm 132093 600 132094 24009/16 14.5mm 132102 600 132100 240019/32 15mm 132133 600 132134 2300
39/64 15.5mm 300529 500 132143 22005/8 16mm 132150 500 132144 2200
21/32 132220 500 132221 210043/64 17mm TBA 500 TBA 2000
11/16 17.5mm 132231 500 132223 200045/64 18mm 300422 500 302580 1900
23/32 18.5mm 132242 500 132243 19003/4 19mm 132259 500 132250 1800
25/32 20mm 302939 400 132293 170013/16 20.5mm 132301 400 132296 1500
Corner Key Size
Packaging InformationSmall Carton Large Carton
Part # Pieces Part # Pieces
Part numbers shown are natural nylon.
C–22
MP Straight ConnectorNylon
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
A
B
C
2.000(50.8 mm)
.2967.52 mm
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)C, ± .005 (.127mm)
3/16–5mm .188 .1447/32–5.5mm .219 .18215/64–6mm .236 .1921/4–6.5mm .250 .206
17/64 .266 .2219/32–7mm .281 .237
19/64–7.5mm .297 .2525/16–8mm .313 .268
11/32 .344 .30023/64–9mm .359 .3153/8–9.5mm .375 .331
13/32–10.5mm .406 .3627/16–11mm .438 .393
15/32–12mm .469 .42431/64–12.5mm .484 .440
1/2–13mm .500 .45617/32–13.5mm .531 .4879/16–14.5mm .563 .51719/32–15mm .594 .550
39/64–15.5mm .609 .5665/8–16mm .625 .581
21/32 .656 .61211/16–17.5mm .688 .644
3/4–19mm .750 .70613/16–20.5mm .813 .768
7/8–22mm .875 .8361–25.4mm 1.000 .956
Connector Size
DecimalEquivalent
Specification inInches
A
C–23
MP Straight ConnectorNylon
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
3/16–5mm 132306 2000 132308 75007/32–5.5mm 132311 1800 132312 600015/64–6mm 132313 1800 TBA 60001/4–6.5mm 300692 1800 132315 5500
17/64 132321 1400 132322 50009/32–7mm 132323 1400 132324 5000
19/64–7.5mm 132325 1300 301089 45005/16–8mm 132328 1200 132327 4000
11/32 TBA 1000 132335 350023/64–9mm 132339 1000 132340 35003/8–9.5mm 301694 1000 132341 3000
13/32–10.5mm 132354 900 301395 28007/16–11mm 301837 800 132356 2600
15/32–12mm 132362 800 132361 250031/64–12.5mm TBA 800 TBA TBA
1/2–13mm 132370 800 132369 240017/32–13.5mm TBA 700 301090 22009/16–14.5mm 301838 600 132382 210019/32–15mm 300324 600 132384 2000
39/64–15.5mm 132386 600 132387 18005/8–16mm 132388 600 132389 1800
21/32 302397 500 301091 170011/16–17.5mm TBA 500 132393 1600
3/4–19mm TBA 400 132394 150013/16–20.5mm 132400 400 132399 1400
7/8–22mm TBA TBA 302605 13001–25.4mm TBA TBA 302658 1200
Connector Size
Packaging Information
Small Carton Large CartonPart # Pieces Part # Pieces
Part numbers shown are natural nylon.
C–24 Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)
MP Straight Connector PDGlass-Filled Nylon
AB
BC.2973/16–5mm* .188 .150 .070
7/32–5.5mm* .219 .181 .09115/64–6mm* .236 .199 .0991/4–6.5mm* .250 .213 .123
17/64* .266 .229 .1399/32–7mm* .281 .244 .154
19/64–7.5mm* .297 .259 .1695/16–8mm* .313 .275 .185
11/32* .344 .307 .21723/64–9mm* .359 .322 .2323/8–9.5mm* .375 .338 .248
13/32–10.5mm .406 .369 .1377/16–11mm .438 .400 .168
15/32–12mm .469 .431 .1991/2 .500 .461 .229
33/64–13mm .512 .473 .24117/32–13.5mm .531 .492 .26035/64–14mm .547 .512 .2809/16–14.5mm .563 .523 .29119/32–15mm .594 .555 .323
39/64–15.5mm .609 .571 .3395/8–16mm .625 .586 .354
21/32 .656 .617 .38511/16–17.5mm .688 .649 .41723/32–18.5mm .719 .679 .447
3/4–19mm .750 .711 .47925/32–20mm .781 .742 .510
13/16–20.5mm .813 .774 .5427/8–22mm .875 .836 .6041–25.4mm 1.000 .961 .729
Connector Size
DecimalEquivalent
Specification in Inches
A B
*C= .188
C 25
MP Straight Connector PDGlass Filled Nylon
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
3/16 5mm 302904 2500 301415 80007/32 5.5mm 132471 2200 132472 750015/64 6mm TBA 2000 132473 75001/4 6.5mm 132474 2000 301297 6500
17/64 TBA 2000 132485 60009/32 7mm 301057 1900 300754 6000
19/64 7.5mm 132486 1900 132487 60005/16 8mm 132490 1800 132489 6000
11/32 132499 1700 132500 580023/64 9mm 132506 1600 132505 56003/8 9.5mm 132511 1600 132508 5400
13/32 10.5mm 302334 1000 301329 35007/16 11mm 300981 900 300117 3200
15/32 12mm TBA 800 132523 30001/2 132526 800 132527 2800
33/64 13mm TBA TBA 302500 270017/32 13.5mm 301905 700 301330 260035/64 14mm TBA 700 132544 25009/16 14.5mm 300982 700 132546 240019/32 15mm TBA 700 132549 2400
39/64 15.5mm TBA 700 132552 24005/8 16mm 132557 700 132554 2300
21/32 TBA 600 300028 220011/16 17.5mm 300756 600 300650 210023/32 18.5mm 132564 600 132563 2000
3/4 19mm 132566 600 132567 200025/32 20mm TBA 500 301328 1800
13/16 20.5mm TBA 500 301816 16007/8 22mm 302498 400 301144 16001 25.4mm TBA 400 301166 1500
Connector Size
Packaging InformationSmall Carton Large Carton
Part # Pieces Part # Pieces
Part numbers shown are natural nylon.
R E C T A N G U L A RK E Y S
Rectangular Fixed w/ Hook Specifications . . . . . . . . . . . . . . . . .C-28
Rectangular Fixed w/ Hook Packaging . . . . . . . . . . . . . . . . . . . .C-29
Rectangular Fixed w/ Fin Specifications . . . . . . . . . . . . . . . . . . . .C-30
Rectangular Fixed w/ Fin Packaging . . . . . . . . . . . . . . . . . . . . . . .C-31
Rectangular Folding w/ Fin no Vent Specifications . . . . . . . . . .C-32
Rectangular Folding w/ Fin no Vent Packaging . . . . . . . . . . . . .C-33
Rectangular Folding w/ Fin w/Vent Specifications . . . . . . . . . .C-34
Rectangular Folding w/ Fin w/Vent Packaging . . . . . . . . . . . . .C-35
C–27
C–28
Rectangular Fixed w/ HookNylon
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
B
AC.296
(7.52mm)
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)C, ± .005 (.127mm)
3/16–5mm .188 .134 .1787/32–5.5mm .219 .165 .20915/64–6mm .236 .182 .2261/4–6.5mm .250 .196 .2409/32–7mm .281 .227 .2715/16–8mm .313 .259 .30311/32–9mm .344 .290 .3343/8–9.5mm .375 .321 .365
13/32 .406 .352 .3967/16–11mm .438 .384 .428
15/32–12mm .469 .418 .4621/2–13mm .500 .446 .490
17/32–14mm .531 .477 .5219/16–14.5mm .563 .509 .553
5/8–16mm .625 .571 .61511/16–17.5mm .688 .634 .67823/32–18.5mm .719 .664 .708
3/4–19mm .750 .696 .74025/32–20mm .781 .727 .771
Corner Key Size
DecimalEquivalent
Specification in Inches
A B
C–29
Rectangular Fixed w/ HookNylon
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
3/16–5mm TBA 3000 129728 100007/32–5.5mm 129730 2500 TBA 800015/64–6mm TBA 2200 TBA 70001/4–6.5mm TBA 2100 129731 65009/32–7mm 129734 2000 129735 60005/16–8mm 129736 1800 129737 570011/32–9mm TBA 1600 TBA 50003/8–9.5mm TBA 1500 129738 4500
13/32 TBA 1200 TBA 40007/16–11mm 129740 1200 129739 4000
15/32–12mm 129741 1000 129742 35001/2–13mm 129743 1000 129744 3500
17/32–14mm TBA 1000 TBA 30009/16–14.5mm TBA 900 129745 3000
5/8–16mm TBA 800 129747 250011/16–17.5mm TBA 500 129749 200023/32–18.5mm TBA 500 TBA 2000
3/4–19mm TBA 500 129750 200025/32–20mm TBA 500 TBA 2000
Corner Key Size
Packaging Information
Small Carton Large CartonPart # Pieces Part # Pieces
Part numbers shown are natural nylon.
C–30
Rectangular Fixed w/ FinNylon
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
B
AC.312
(7.92mm)
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)C, ± .005 (.127mm)
2.8mm .110 .090 .1063.5mm .138 .100 .128
3/16–5mm .188 .134 .1787/32–5.5mm .219 .165 .20915/64–6mm .234 .182 .2261/4–6.5mm .250 .196 .240
17/64 .266 .212 .2569/32–7mm .281 .227 .271
19/64–7.5mm .297 .242 .2865/16–8mm .313 .259 .303
11/32 .344 .290 .33423/64–9mm .359 .305 .3493/8–9.5mm .375 .321 .365
25/64–10mm .391 .340 .38413/32–10.5mm .406 .352 .396
7/16–11mm .438 .384 .42829/64–11.5mm .454 .399 .44315/32–12mm .469 .414 .458
31/64–12.5mm .484 .430 .4741/2 .500 .446 .490
33/64–13mm .516 .458 .50217/32–13.5mm .531 .477 .52135/64–14mm .547 .497 .5419/16–14.5mm .563 .509 .55319/32–15mm .594 .540 .584
39/64–15.5mm .604 .556 .6005/8–16mm .625 .571 .615
21/32 .656 .602 .64643/64–17mm .672 .615 .659
11/16–17.5mm .688 .634 .67845/64–18mm .703 .654 .698
23/32–18.5mm .719 .665 .7093/4–19mm .750 .696 .740
25/32–20mm .781 .727 77113/16–20.5mm .813 .759 .803
Corner Key Size
DecimalEquivalent
Specification in Inches
A B
C–31
Rectangular Fixed w/ FinNylon
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
2.8mm 300609*† 2600 TBA TBA3.5mm TBA 2200 129832† 7000
3/16–5mm 129753 1800 129751 58007/32–5.5mm TBA 1400 129760 500015/64–6mm TBA 1300 129764 45001/4–6.5mm TBA 1200 129765 4200
17/64 TBA 1100 129769 40009/32–7mm TBA 1100 129770 4000
19/64–7.5mm TBA 1000 TBA 39005/16–8mm 129772 1000 129771 3900
11/32 129774 1000 129775 360023/64–9mm TBA 900 129780 35003/8–9.5mm TBA 900 129781 3400
25/64–10mm TBA 800 TBA 300013/32–10.5mm 129783 800 129784 3000
7/16–11mm 129785 800 TBA 280029/64–11.5mm TBA 700 TBA 260015/32–12mm TBA 700 129786 2500
31/64–12.5mm TBA TBA TBA TBA1/2 129793 600 129791 2300
33/64–13mm TBA 500 TBA 220017/32–13.5mm 129803 500 129801 210035/64–14mm TBA 500 TBA 20009/16–14.5mm 129805 500 129806 200019/32–15mm 129808 500 129807 1900
39/64–15.5mm TBA 500 TBA 18005/8–16mm 129814 500 129811 1800
21/32 TBA 400 129815 160043/64–17mm TBA 400 TBA 1500
11/16–17.5mm 129816 400 129817 150045/64–18mm TBA 400 TBA 1400
23/32–18.5mm TBA 300 TBA 14003/4–19mm TBA 300 129819 1400
25/32–20mm TBA 300 TBA 130013/16–20.5mm TBA 300 TBA 1200
Corner Key Size
Packaging Information
Small Carton Large CartonPart # Pieces Part # Pieces
Part numbers shown are natural nylon.†Glass-filled nylon only.*For Hi-Q Steel.
C–32
Rectangular Folding w/ Fin no VentNylon
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
A
B
.315
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)C, ± .005 (.127mm)
5/32–4mm .156 .112 .1523/16–5mm .188 .138 .178
7/32–5.5mm .219 .169 .20915/64–6mm .236 .196 .2261/4–6.5mm .250 .200 .240
17/64 .266 .216 .2569/32–7mm .281 .231 .271
19/64–7.5mm .297 .246 .2865/16–8mm .313 .263 .303
21/64–8.5mm .328 .278 .31811/32 .344 .294 .334
23/64–9mm .359 .309 .3493/8–9.5mm .375 .325 .365
25/64–10mm .394 .344 .38413/32–10.5mm .406 .356 .396
27/64 .422 .372 .4127/16–11mm .438 .388 .428
29/64–11.5mm .453 .403 .44315/32–12mm .469 .419 .459
31/64 .484 .434 .4741/2 .500 .450 .490
33/64–13mm .512 .465 .50517/32–13.5mm .531 .481 .52135/64–14mm .551 .495 .5359/16–14.5mm .563 .513 .553
37/64 .578 .528 .56819/32–15mm .594 .544 .584
39/64–15.5mm .610 .557 .5975/8–16mm .625 .575 .615
41/64 .641 .590 .63021/32 .656 .606 .646
43/64–17mm .669 .622 .66211/16–17.5mm .688 .622 .66245/64–18mm .709 .655 .695
23/32–18.5mm .719 .669 .7093/4–19mm .750 .700 .740
25/32–20mm .781 .731 .77127/32–21.5mm .844 .794 .834
Corner Key Size
DecimalEquivalent
Specificationin Inches
A B
C–33
Rectangular Folding w/ Fin no VentNylon
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
5/32–4mm TBA 1800 300968 60003/16–5mm 129837 1600 129835 5200
7/32–5.5mm 129846 1200 129847 420015/64–6mm 129887 1000 129888 38001/4–6.5mm 129895 1000 129889 3600
17/64 129902 1000 129903 35009/32–7mm 129911 1000 129906 3400
19/64–7.5mm 129937 900 129938 32005/16–8mm 129939 900 129940 3000
21/64–8.5mm TBA 900 TBA 280011/32 129959 900 129946 2800
23/64–9mm TBA 800 129988 26003/8–9.5mm 129991 700 129990 2500
25/64–10mm TBA 700 TBA 240013/32–10.5mm 130022 700 130011 2400
27/64 TBA TBA TBA TBA7/16–11mm 130054 600 130053 2200
29/64–11.5mm TBA 600 301396 210015/32–12mm 130075 600 130063 2000
31/64 TBA 500 TBA TBA1/2 130129 500 130118 1800
33/64–13mm TBA 500 TBA 180017/32–13.5mm 130151 500 130138 170035/64–14mm TBA 500 TBA 17009/16–14.5mm 130202 500 130198 1600
37/64 TBA TBA TBA TBA19/32–15mm 130226 400 130215 1500
39/64–15.5mm TBA 400 130277 15005/8–16mm 130284 400 130278 1400
41/64 TBA 400 TBA TBA21/32 300388 400 130291 1300
43/64–17mm 130348 400 130349 130011/16–17.5mm 301789 400 130350 130045/64–18mm 130360 400 130361 1200
23/32–18.5mm 130365 400 130362 12003/4–19mm 130410 300 130409 1200
25/32–20mm 301391 300 130415 120027/32–21.5mm 301316 300 130438 1000
Corner Key Size
Packaging Information
Small Carton Large CartonPart # Pieces Part # Pieces
Part numbers shown are natural nylon.
C–34
Rectangular Folding w/ Fin w/ VentNylon
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
A
B
.315
Vent▲
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)C, ± .005 (.127mm)
7/32–5.5mm .219 .169 .20915/64–6mm .236 .196 .2261/4–6.5mm .250 .200 .2409/32–7mm .281 .231 .271
19/64–7.5mm .297 .246 .2865/16–8mm .313 .263 .303
21/64 .328 .278 .31811/32 .344 .294 .334
23/64–9mm .359 .309 .3493/8–9.5mm .375 .325 .365
25/64–10mm .394 .344 .38413/32–10.5mm .406 .356 .396
27/64 .422 .372 .4127/16–11mm .438 .388 .428
29/64–11.5mm .453 .403 .44315/32–12mm .469 .419 .459
31/64 .484 .434 .4741/2 .500 .450 .490
33/64–13mm .512 .465 .50517/32–13.5mm .531 .481 .52135/64–14mm .551 .495 .5359/16–14.5mm .563 .513 .553
37/64 .578 .528 .56819/32–15mm .594 .544 .584
39/64–15.5mm .610 .557 .5975/8–16mm .625 .575 .615
41/64 .641 .590 .63021/32 .656 .606 .646
43/64–17mm .669 .622 .66211/16–17.5mm .688 .622 .66245/64–18mm .709 .655 .695
23/32–18.5mm .719 .669 .7093/4–19mm .750 .700 .740
25/32–20mm .781 .731 .77127/32–21.5mm .844 .794 .834
Corner Key Size
DecimalEquivalent
Specification in Inches
A B
C–35
Rectangular Folding w/ Fin w/ VentNylon
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Corner Key Size
Packaging Information
Small Carton Large CartonPart # Pieces Part # Pieces
7/32–5.5mm 130472 1200 130465 420015/64–6mm TBA 1000 TBA 38001/4–6.5mm 130474 1000 130475 36009/32–7mm TBA 1000 130476 3400
19/64–7.5mm TBA 900 TBA TBA5/16–8mm 130482 900 130481 3000
21/64 TBA 900 TBA 280011/32 TBA 900 130483 2800
23/64–9mm TBA 800 130490 26003/8–9.5mm 130491 700 TBA 2500
25/64–10mm TBA 700 TBA 240013/32–10.5mm 300195 700 130492 2400
27/64 TBA TBA TBA TBA7/16–11mm TBA 600 130499 2200
29/64–11.5mm TBA 600 TBA 210015/32–12mm TBA 600 130500 2000
31/64 TBA 500 TBA TBA1/2 TBA 500 130512 1800
33/64–13mm TBA 500 TBA 180017/32–13.5mm TBA 500 130514 170035/64–14mm TBA 500 TBA 17009/16–14.5mm TBA 500 130528 1600
37/64 TBA TBA TBA TBA19/32–15mm TBA 400 130529 1500
39/64–15.5mm TBA 400 TBA 15005/8–16mm TBA 400 TBA 1400
41/64 TBA 400 TBA TBA21/32 TBA 400 130539 1300
43/64–17mm TBA 400 TBA 130011/16–17.5mm TBA 400 130543 130045/64–18mm TBA 400 TBA 1200
23/32–18.5mm TBA 400 130544 12003/4–19mm TBA 300 130554 1200
25/32–20mm TBA 300 130555 120027/32–21.5mm 130563 300 130564 1000
Part numbers shown are natural nylon.
T R I M L I N E K E Y SA N D C O N N E C T O R S
Trimline Fixed w/ Hook Specifications . . . . . . . . . . . . . . . . . . . . .C-38
Trimline Fixed w/ Hook Packaging . . . . . . . . . . . . . . . . . . . . . . . .C-39
Trimline Fixed w/ Fin Specifications . . . . . . . . . . . . . . . . . . . . . . .C-40
Trimline Fixed w/ Fin Packaging . . . . . . . . . . . . . . . . . . . . . . . . . .C-41
Trimline LP250 Fixed Specifications . . . . . . . . . . . . . . . . . . . . . . . .C-42
Trimline LP250 Fixed Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . .C-43
Trimline LP250 Flex Specifications . . . . . . . . . . . . . . . . . . . . . . . . .C-44
Trimline LP250 Flex Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-45
Trimline LP250 Straight Connector PD Specifications . . . . . . . .C-46
Trimline LP250 Straight Connector PD Packaging . . . . . . . . . . .C-47
Trimline Ultra-Loc WA Specifications . . . . . . . . . . . . . . . . . . . . . .C-48
Trimline Ultra-Loc WA Packaging . . . . . . . . . . . . . . . . . . . . . . . . .C-49
Trimline Ultra-Loc BI Specifications . . . . . . . . . . . . . . . . . . . . . . . .C-50
Trimline Ultra-loc BI Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . .C-51
C–37
C–38
Trimline Fixed w/ HookNylon
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
B
AC.296
(7.52mm)
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)C, ± .005 (.127mm)
1/4–6.5mm .250 .196 .2405/16–8mm .313 .258 .3033/8–9.5mm .375 .321 .3657/16–11mm .438 .384 .4281/2–13mm .500 .446 .490
9/16–14.5mm .563 .509 .55319/32–15mm .594 .540 .5845/8–16mm .625 .571 .615
21/32 .656 .602 .64611/16–17.5mm .688 .634 .67823/32–18.5mm .719 .665 .709
3/4–19mm .750 .696 .740
Corner Key Size
DecimalEquivalent
Specification in Inches
A B
C–39
Trimline Fixed w/ HookNylon
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
1/4–6.5mm 130573 2400 130574 100005/16–8mm 301883 2000 130594 60003/8–9.5mm 130600 1600 130601 55007/16–11mm 130613 1200 130614 50001/2–13mm 130626 1000 130627 4000
9/16–14.5mm 130647 1000 130643 400019/32–15mm TBA 800 130654 36005/8–16mm 130656 800 130657 3200
21/32 130678 600 130676 300011/16–17.5mm 130691 500 130682 280023/32–18.5mm TBA 500 TBA TBA
3/4–19mm 300024 500 130696 2500
Corner Key Size
Packaging Information
Small Carton Large CartonPart # Pieces Part # Pieces
Part numbers shown are natural nylon.
C–40
Trimline Fixed w/ FinNylon
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
B
AC
.315(8.00mm)
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)C, ± .005 (.127mm)
1/4–6.5mm .250 .210 .2409/32–7mm .281 .241 .271
19/64–7.5mm .297 .257 .2875/16–8mm .313 .273 .303
11/32 .344 .304 .33423/64–9mm .359 .319 .3493/8–9.5mm .375 .335 .365
25/64–10mm .391 .354 .38413/32 .406 .366 .396
7/16–11mm .438 .397 .42729/64–11.5mm .453 .413 .44315/32–12mm .469 .426 .458
1/2 .500 .456 .49033/64–13mm .516 .468 .502
17/32–13.5mm .531 .487 .52135/64–14mm .547 .507 .5419/16–14.5mm .563 .518 .55219/32–15mm .594 .550 .584
39/64–15.5mm .609 .566 .6005/8–16mm .625 .581 .615
21/32 .656 .612 .64643/64–17mm .672 .625 .659
11/16–17.5mm .688 .644 .67845/64 –18mm .703 .664 .69823/32–18.5mm .719 .674 .708
3/4–19mm .750 .706 .74025/32–20mm .781 .737 .771
13/16–20.5mm .813 .769 .8031– 25.4mm 1.000 .956 .990
1 1/16 1.063 1.018 1.052
Corner Key Size
DecimalEquivalent
Specification in Inches
A B
C–41
Trimline Fixed w/ FinNylon
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
1/4 – 6.5mm 130718 1700 130705 62009/32– 7mm TBA TBA 301955 5400
19/64– 7.5mm 130738 1400 130737 46005/16– 8mm 130740 1300 130739 4200
11/32 302162 1200 TBA 390023/64– 9mm 301739 1100 TBA TBA3/8–9.5mm 130774 1100 130768 3600
25/64– 10mm TBA TBA TBA TBA13/32 302163 900 TBA 3400
7/16–11mm 130799 800 130797 320029/64–11.5mm TBA TBA TBA TBA15/32–12mm TBA 700 130823 2800
1/2 130826 600 130827 260033/64–13mm TBA 600 300251 2500
17/32–13.5mm 130865 600 130866 240035/64–14mm 130867 600 130868 24009/16–14.5mm 130878 600 130869 240019/32–15mm 130894 600 130895 2300
39/64–15.5mm TBA TBA TBA 23005/8–16mm 130908 500 130896 2200
21/32 TBA 500 130933 210043/64–17mm TBA TBA TBA 2000
11/16–17.5mm 130944 500 130940 200045/64 –18mm TBA 500 TBA TBA23/32–18.5mm 302164 500 TBA 1900
3/4–19mm 130970 500 130971 180025/32–20mm TBA TBA 301936 1600
13/16–20.5mm 302830 400 130991 16001 – 25.4mm 300277 300 300276 1200
1 1/16 TBA 300 301235 1200
Corner Key Size
Packaging Information
Small Carton Large CartonPart # Pieces Part # Pieces
Part numbers shown are natural nylon.
C–42
Trimline LP250 FixedNylon
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
B
AC.230
(5.84mm)
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)C, ± .005 (.127mm)
1/4–6.5mm .250 .210 .2409/32–7mm .281 .241 .2715/16–8mm .313 .273 .303
11/32 .344 .304 .3343/8–9.5mm .375 .335 .365
13/32–10.5mm .406 .366 .3967/16– 11mm .438 .397 .427
15/32–12mm .469 .426 .4581/2 .500 .456 .490
17/32–13.5mm .531 .487 .5219/16–14.5mm .563 .518 .55219/32–15mm .594 .550 .5845/8–16mm .625 .581 .615
21/32 .656 .612 .64611/16–17.5mm .688 .644 .67823/32–18.5mm .719 .674 .708
3/4–19mm .750 .706 .74025/32–20mm .781 .737 .771
13/16–20.5mm .813 .769 .803
Corner Key Size
DecimalEquivalent
Specification in Inches
A B
C–43
Trimline LP250 FixedNylon
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
1/4–6.5mm 131149 2400 131143 90009/32–7mm TBA 2200 300327 75005/16–8mm 131162 2000 131163 6000
11/32 TBA TBA TBA TBA3/8–9.5mm 131171 1500 131172 5000
13/32–10.5mm 131180 1400 131181 46007/16– 11mm 300118 1200 131182 4200
15/32–12mm TBA 1000 131186 38001/2 131190 1000 131187 3600
17/32–13.5mm TBA 1000 131202 34009/16–14.5mm 131205 900 131203 320019/32–15mm TBA TBA TBA TBA5/8–16mm 131211 800 131212 3000
21/32 131222 800 131223 280011/16–17.5mm 301442 700 131224 280023/32–18.5mm TBA TBA TBA TBA
3/4–19mm 131233 600 131234 240025/32–20mm TBA TBA TBA TBA
13/16–20.5mm TBA TBA 302191 2000
Corner Key Size
Packaging Information
Small Carton Large CartonPart # Pieces Part # Pieces
Part numbers shown are natural nylon.
C–44 Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
B
CA
.230(5.84mm)
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)C, ± .005 (.127mm)
1/4–6.5mm .250 .210 .2409/32–7mm .281 .241 .2715/16–8mm .313 .273 .303
11/32 .344 .304 .3343/8–9.5mm .375 .335 .365
13/32–10.5mm .406 .366 .3967/16– 11mm .438 .397 .427
15/32–12mm .469 .426 .4581/2 .500 .456 .490
17/32–13.5mm .531 .487 .5219/16–14.5mm .563 .518 .55219/32–15mm .594 .550 .5845/8–16mm .625 .581 .615
21/32 .656 .612 .64611/16–17.5mm .688 .644 .67823/32–18.5mm .719 .674 .708
3/4–19mm .750 .706 .74025/32–20mm .781 .737 .771
13/16–20.5mm .813 .769 .803
Corner Key Size
DecimalEquivalent
Specificationin Inches
A B
Trimline LP250 Flex Nylon
C 45Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
1/4 6.5mm 300930 2400 131245 90009/32 7mm TBA TBA TBA TBA5/16 8mm 301555 2000 131249 6000
11/32 TBA TBA TBA TBA3/8 9.5mm 131250 1500 131252 5000
13/32 TBA TBA TBA TBA7/16 11mm 302088 1200 131256 420015/32 12mm TBA TBA TBA TBA
1/2 131257 1000 131258 360017/32 13.5mm TBA TBA TBA TBA9/16 14.5mm 302089 900 302925 320019/32 15mm TBA TBA TBA TBA5/8 16mm 302117 800 131265 3000
21/32 TBA TBA TBA TBA11/16 17.5mm 302160 700 300128 280023/32 18.5mm TBA TBA TBA TBA
3/4 19mm 302118 600 131270 240025/32 20mm TBA TBA TBA TBA
13/16 20.5mm TBA TBA TBA TBA
Trimline LP250 FlexNylon
Corner Key Size
Packaging InformationSmall Carton Large Carton
Part # Pieces Part # Pieces
Part numbers shown are natural nylon.
C–46
Trimline LP250 Straight Connector PDGlass-Filled Nylon
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
B
C
1.0002.000
A
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)C, ± .005 (.127mm)
Connector Size
DecimalEquivalent
Specification in Inches
A B C1/4–6.5mm .250 .214 .114 .1305/16–8mm .313 .277 .177 .1303/8–9.5mm .375 .339 .199 .2307/16–11mm .438 .401 .261 .230
1/2 .500 .464 .324 .2309/16–14.5mm .563 .526 .386 .230
5/8–16mm .625 .589 .449 .23011/16–17.5mm .688 .652 .512 .230
3/4–19mm .750 .714 .574 .230
C–47
Trimline LP250 Straight Connector PDGlass-Filled Nylon
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
1/4–6.5mm 300595 3000 TBA TBA5/16–8mm 300596 2500 TBA TBA3/8–9.5mm 131241 1200 131242 45007/16–11mm TBA 1100 131243 3600
1/2 TBA TBA 300501 34009/16–14.5mm TBA 900 300503 3200
5/8 –16mm TBA 700 300597 260011/16–17.5mm 131244 700 300502 2500
3/4–19mm TBA 600 300598 2000
Connector Size
Packaging Information
Small Carton Large CartonPart # Pieces Part # Pieces
Part numbers shown are natural nylon.
C–48
Trimline Ultra-Loc WANylon and Glass-Filled
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
▲
▲B
▲
▲
A▲
▲
C.312
(7.92mm)
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)C, ± .005 (.127mm)
3/16–4.7mm .188 .148 .1787/32–5.5mm .219 .168 .200
6mm .236 .186 .2261/4–6.5mm .250 .210 .240
17/64 .266 .226 .2569/32–7mm .281 .241 .271
19/64–7.5mm .297 .256 .2865/16–8mm .313 .273 .303
11/32 .344 .304 .33423/64–9mm .359 .314 .3443/8–9.5mm .375 .335 .365
25/64–10mm .391 .351 .38413/32–10.5mm .406 .363 .396
7/16–11mm .438 .397 .42729/64–11.5mm .453 .411 .44315/32–12mm .469 .426 .458
31/64–12.5mm .484 .441 .4761/2 .500 .456 .490
33/64–13mm .516 .468 .50217/32–13.5mm .531 .487 .52135/64–14mm .551 .507 .5419/16–14.5mm .563 .518 .55219/32–15mm .594 .550 .584
39/64–15.5mm .610 .556 .6005/8–16mm .625 .581 .615
21/32 .656 .612 .64643/64–17mm .669 .625 .659
11/16–17.5mm .688 .644 .67845/64–18mm .709 .665 .699
23/32–18.5mm .719 .674 .7083/4–19mm .750 .706 .740
25/32–20mm .781 .737 .77113/16–20.5mm .813 .767 .803
Corner Key Size
DecimalEquivalent
Specification in Inches
A B
C 49
Trimline Ultra-Loc WANylon and Glass Filled
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
3/16 4.7mm 302729 4200 301064 42007/32 5.5mm 302666 4200 131022 4200
6mm TBA 3800 300027 38001/4 6.5mm 130997 3700 131024 3700
17/64 TBA 3500 300694 35009/32 7mm 131003 3300 131030 3300
19/64 7.5mm TBA 3000 300494 30005/16 8mm 131006 3000 131032 3000
11/32 302719 2700 131039 270023/64 9mm 302667 2600 131040 26003/8 9.5mm 131009 2400 131043 2400
25/64 10mm TBA 2300 301474 230013/32 10.5mm 131011 2200 301961 2200
7/16 11mm 131012 1900 131046 190029/64 11.5mm TBA 1800 300496 180015/32 12mm 131013 1800 131047 1800
31/64 12.5mm 300273 1800 302558 18001/2 300993 1700 131048 1700
33/64 13mm 300783 1600 300252 160017/32 13.5mm 302668 1500 131052 150035/64 14mm TBA 1500 TBA 15009/16 14.5mm 300255 1400 131053 140019/32 15mm 302669 1300 302298 1300
39/64 15.5mm TBA 1300 300495 13005/8 16mm 131015 1300 131056 1300
21/32 131016 1200 302938 120043/64 17mm TBA 1100 TBA 1100
11/16 17.5mm 300256 1100 302759 110045/64 18mm 302670 1100 TBA 1100
23/32 18.5mm 131018 1000 301962 10003/4 19mm 300257 1000 302673 1000
25/32 20mm 131019 900 302309 90013/16 20.5mm 302671 900 302297 900
Part numbers shown are natural nylon.
Corner KeySize
Packaging InformationNylon Carton Glass-Filled Carton
Part # Piece Count Part # Piece Count
C–50
Trimline Ultra-Loc BINylon
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
▲
▲B
▲
▲
A▲
▲
C.312
(7.92mm)
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)C, ± .005 (.127mm)
7/32–5.5mm .219 .168 .2006mm .236 .186 .226
1/4–6.5mm .250 .210 .24017/64 .266 .226 .256
9/32–7mm .281 .241 .27119/64–7.5mm .297 .256 .286
5/16–8mm .313 .273 .30311/32 .344 .304 .334
23/64–9mm .359 .314 .3443/8–9.5mm .375 .335 .365
25/64–10mm .391 .351 .38413/32 .406 .363 .396
7/16–11mm .438 .397 .42729/64–11.5mm .453 .411 .44315/32–12mm .469 .426 .458
31/64–12.5mm .484 .441 .4761/2 .500 .456 .490
33/64–13mm .516 .468 .50217/32–13.5mm .531 .487 .52135/64–14mm .547 .507 .5419/16–14.5mm .563 .518 .55219/32–15mm .594 .550 .584
39/64–15.5mm .609 .556 .6005/8–16mm .625 .581 .615
21/32 .656 .612 .64643/64–17mm .672 .625 .659
11/16–17.5mm .688 .644 .67845/64–18mm .703 .665 .699
23/32–18.5mm .719 .674 .7083/4–19mm .750 .706 .740
25/32–20mm .781 .737 .77113/16–20.5mm .813 .767 .803
Corner Key Size
DecimalEquivalent
Specificationin Inches
A B
C–51
Trimline Ultra-Loc BINylon
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
3/16–4.7mm TBA 1200 TBA TBA7/32–5.5mm 131076 1200 131077 4200
6mm TBA 1100 TBA 38001/4–6.5mm TBA 1100 131078 3700
17/64 TBA 1000 TBA 35009/32–7mm TBA 1000 TBA 3300
19/64–7.5mm TBA 900 TBA 30005/16–8mm 301446 800 131084 3000
11/32 TBA 800 TBA 270023/64–9mm TBA 800 TBA 26003/8–9.5mm TBA 700 131089 2400
25/64–10mm TBA 700 TBA 230013/32 TBA 600 TBA 2200
7/16–11mm TBA 600 131096 190029/64–11.5mm TBA 500 TBA 180015/32–12mm TBA 500 131101 1800
31/64–12.5mm TBA 500 TBA 18001/2 300487 500 131104 1700
33/64–13mm TBA 500 131111 160017/32–13.5mm TBA 500 TBA 150035/64–14mm TBA 500 TBA 15009/16–14.5mm TBA 400 131112 140019/32 –15mm TBA 400 TBA 1300
39/64–15.5mm TBA 400 TBA 13005/8–16mm TBA 400 131116 1300
21/32 TBA 400 TBA 120043/64–17mm TBA 300 TBA 1100
11/16–17.5mm TBA 300 131121 110045/64–18mm TBA 300 TBA 1100
23/32–18.5mm TBA 300 TBA 10003/4–19mm TBA 300 131122 1000
25/32–20mm TBA 300 TBA 90013/16–20.5mm TBA 300 TBA 900
Corner Key Size
Packaging Information
Small Carton Large CartonPart # Pieces Part # Pieces
Part numbers shown are natural nylon.
L P D K E Y SA N D C O N N E C T O R SNote: For use with both LPD and LPX Air Spacer
LPD Fixed Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-54
LPD Fixed Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-55
LPD Folding Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-56
LPD Folding Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-57
LPD Flex Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-58
LPD Flex Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-59
LPD WA Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-60
LPD WA Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-61
LPD BI Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-62
LPD BI Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-63
LPD Straight Connector Specifications . . . . . . . . . . . . . . . . . . . . .C-64
LPD Straight Connector Packaging . . . . . . . . . . . . . . . . . . . . . . . .C-65
LPD Straight Connector PD Specifications . . . . . . . . . . . . . . . . . .C-66
LPD Straight Connector PD Packaging . . . . . . . . . . . . . . . . . . . . .C-67
LPD Kronenberg Connector Specifications . . . . . . . . . . . . . . . . . .C-68
LPD Kronenberg Connector Packaging . . . . . . . . . . . . . . . . . . . . .C-69
C–53
C–54
LPD FixedNylon
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
B
AC.225
(5.72mm)
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)C, ± .005 (.127mm)
3/16–5mm .188 .134 .1787/32–5.5mm .219 .164 .20815/64–6mm .236 .182 .2261/4–6.5mm .250 .196 .240
17/64 .266 .212 .2569/32–7mm .281 .227 .271
19/64–7.5mm .297 .242 .2865/16–8mm .313 .259 .303
8.5mm .335 .281 .32511/32 .344 .289 .334
23/64–9mm .359 .300 .3493/8–9.5mm .375 .321 .365
25/64–10mm .391 .337 .38413/32–10.5mm .406 .347 .396
7/16–11mm .438 .383 .42729/64–11.5mm .453 .399 .44315/32–12mm .469 .414 .458
31/64–12.5mm .484 .435 .4821/2 .500 .440 .490
33/64–13mm .516 .452 .50217/32–13.5mm .531 .471 .52135/64–14mm .547 .486 .5419/16–14.5mm .563 .501 .55219/32–15mm .594 .534 .584
39/64–15.5mm .609 .550 .6005/8–16mm .625 .565 .615
21/32 .656 .596 .64643/64–17mm .672 .609 .659
11/16–17.5mm .688 .628 .67845/64–18mm .703 .648 .699
23/32–18.5mm .719 .658 .7083/4–19mm .750 .690 .740
49/64–19.5mm .766 .708 .75725/32–20mm .781 .721 .771
13/16–20.5mm .813 .752 .80327/32–21.5mm .844 .784 .834
7/8–22mm .875 .815 .865
Corner Key Size
DecimalEquivalent
Specificationin Inches
A B
C–55
LPD FixedNylon
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
3/16–5mm 132574 3500 132576 120007/32–5.5mm 132627 3000 132628 1000015/64–6mm 132652 2600 132653 90001/4–6.5mm 132662 2400 132659 8500
17/64 TBA 2300 TBA 80009/32–7mm 132787 2200 132784 7500
19/64–7.5mm TBA 2000 132797 65005/16–8mm 132803 2000 132804 6000
8.5mm 301823 2000 TBA 600011/32 132868 1700 132866 6000
23/64–9mm 132885 1600 132881 55003/8–9.5mm 132892 1500 132886 5000
25/64–10mm 132983 1400 132984 480013/32–10.5mm 132986 1400 132987 4600
7/16–11mm 133003 1200 132996 420029/64–11.5mm 300373 1100 300359 400015/32–12mm 133050 1000 133049 3800
31/64–12.5mm 300365 1000 301496 37001/2 133072 1000 133071 3600
33/64–13mm TBA 1000 133182 360017/32–13.5mm 133187 1000 133183 340035/64–14mm 133192 900 133193 32009/16–14.5mm 133196 900 133197 320019/32–15mm 133260 900 133255 3000
39/64–15.5mm 133265 800 133266 30005/8–16mm 133271 800 133269 3000
21/32 133343 800 133341 280043/64–17mm TBA 700 133351 2800
11/16–17.5mm 133354 700 133353 280045/64–18mm TBA 600 302829 2600
23/32–18.5mm 133402 600 133397 25003/4–19mm 133411 600 133409 2400
49/64–19.5mm TBA 600 TBA 230025/32–20mm 300471 600 133476 2200
13/16–20.5mm 300301 500 133477 220027/32–21.5mm TBA 500 TBA 2000
7/8–22mm TBA 500 301429 2000
Corner Key Size
Packaging Information
Small Carton Large CartonPart # Pieces Part # Pieces
Part numbers shown are natural nylon.
C–56
LPD FoldingNylon
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
B
AC.225
(5.72mm)
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)C, ± .005 (.127mm)
3/16–5mm* .188 .134 .1787/32–5.5mm* .219 .164 .20815/64–6mm* .236 .182 .2261/4–6.5mm* .250 .196 .240
17/64* .266 .212 .2569/32–7mm* .281 .227 .271
19/64–7.5mm* .297 .242 .2865/16–8mm* .313 .259 .303
8.5mm .335 .280 .32511/32 .344 .289 .334
23/64–9mm .359 .300 .3493/8–9.5mm .375 .321 .365
25/64–10mm .391 .340 .38413/32–10.5mm .406 .352 .396
7/16–11mm .438 .383 .42729/64–11.5mm .453 .399 .44315/32–12mm .469 .414 .458
31/64–12.5mm .484 .424 .4741/2 .500 .440 .490
33/64–13mm .516 .452 .50217/32–13.5mm .531 .471 .52135/64–14mm .547 .486 .5419/16–14.5mm .563 .501 .55219/32–15mm .594 .534 .584
39/64–15.5mm .609 .550 .6005/8–16mm .625 .565 .615
41/64 .641 .581 .63021/32 .656 .596 .638
43/64–17mm .672 .609 .65911/16–17.5mm .688 .628 .67845/64–18mm .703 .648 .699
23/32–18.5mm .719 .658 .7083/4–19mm .750 .690 .740
49/64–19.5mm .766 .708 .75725/32–20mm .781 .721 .771
13/16–20.5mm .813 .752 .80327/32–21.5mm .844 .784 .834
7/8–22mm .875 .815 .865
Corner Key Size
DecimalEquivalent
Specification in Inches
A B
*C = .220
C–57
LPD FoldingNylon
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
3/16–5mm 133505 2000 133509 70007/32–5.5mm TBA 2000 133522 600015/64–6mm 133528 1600 133530 55001/4–6.5mm 133535 1400 133531 5000
17/64 TBA 1300 TBA 46009/32–7mm 133566 1200 133567 4400
19/64–7.5mm 133574 1200 133572 43005/16–8mm 133581 1200 133575 4200
8.5mm TBA TBA TBA TBA11/32 133591 1000 133592 4000
23/64–9mm TBA 1000 133596 38003/8–9.5mm 133601 1000 133597 3500
25/64–10mm TBA 900 301205 340013/32–10.5mm TBA 900 133631 3200
7/16–11mm 133659 900 133637 300029/64–11.5mm TBA 800 TBA 280015/32–12mm 133665 800 133663 2600
31/64–12.5mm TBA 800 300892 25001/2 133676 800 133674 2500
33/64–13mm 133724 800 133725 240017/32–13.5mm TBA 700 133726 230035/64–14mm 133732 700 133733 23009/16–14.5mm 133734 700 133735 230019/32–15mm 133760 600 133759 2200
39/64–15.5mm TBA 600 133767 20005/8–16mm 133769 600 133768 2000
41/64 TBA TBA TBA TBA21/32 302493 500 133811 1900
43/64–17mm 133816 500 133817 180011/16–17.5mm 302219 500 133818 180045/64–18mm TBA 500 TBA 1700
23/32–18.5mm 133833 500 133834 17003/4–19mm 133858 500 133842 1600
49/64–19.5mm TBA 400 TBA 150025/32–20mm TBA 400 133873 1500
13/16–20.5mm TBA 400 133878 150027/32–21.5mm TBA 400 TBA 1400
7/8–22mm 133882 400 133883 1400
Corner Key Size
Packaging Information
Small Carton Large CartonPart # Pieces Part # Pieces
Part numbers shown are natural nylon.
C–58
LPD FlexNylon
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
B
AC.225
(5.72mm)
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)C, ± .005 (.127mm)
3/16–5mm .188 .134 .1787/32–5.5mm .219 .164 .20815/64–6mm .236 .182 .2261/4–6.5mm .250 .196 .240
17/64 .266 .212 .2569/32–7mm .281 .227 .271
19/64–7.5mm .297 .242 .2865/16–8mm .313 .259 .303
11/32 .344 .289 .33423/64–9mm .359 .300 .3493/8–9.5mm .375 .321 .365
25/64–10mm .391 .340 .38413/32–10.5mm .406 .352 .396
7/16–11mm .438 .383 .42729/64–11.5mm .453 .399 .44315/32–12mm .469 .414 .458
31/64–12.5mm .484 .424 .4741/2 .500 .440 .490
33/64–13mm .516 .455 .50217/32–13.5mm .531 .471 .52135/64–14mm .547 .491 .5419/16–14.5mm .563 .501 .55219/32–15mm .594 .534 .584
39/64–15.5mm .609 .550 .6005/8–16mm .625 .565 .615
21/32 .656 .596 .64643/64–17mm .672 .609 .659
11/16–17.5mm .688 .628 .67845/64–18mm .703 .648 .699
23/32–18.5mm .719 .658 .7083/4–19mm .750 .690 .740
49/64–19.5mm .766 .708 .75825/32–20mm .781 .721 .771
13/16–20.5mm .813 .752 .80327/32–21.5mm .844 .784 .834
7/8–22mm .875 .815 .865
Corner Key Size
DecimalEquivalent
Specification in Inches
A B
C–59
LPD FlexNylon
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
3/16–5mm 134147 3500 300358 120007/32–5.5mm 134157 3000 134156 1000015/64–6mm 134166 2600 134165 90001/4–6.5mm 134174 2400 134170 8500
17/64 TBA 2200 TBA 75009/32–7mm 134206 2200 134207 7500
19/64–7.5mm 134208 2000 134209 65005/16–8mm 134213 2000 134212 6000
11/32 134230 1700 134231 600023/64–9mm 134236 1600 134235 55003/8–9.5mm 134239 1500 134240 5000
25/64–10mm TBA 1400 134278 480013/32–10.5mm 134284 1400 134283 4600
7/16–11mm 134291 1200 134286 420029/64–11.5mm TBA 1100 TBA 400015/32–12mm 300350 1000 134302 3800
31/64–12.5mm TBA 1000 TBA 37001/2 134318 1000 134315 3600
33/64–13mm 300863 1000 300323 360017/32–13.5mm 134365 1000 134363 340035/64–14mm TBA 900 134369 32009/16–14.5mm 134370 900 134371 320019/32–15mm 134388 900 134385 3000
39/64–15.5mm 134392 800 134393 30005/8–16mm 134397 800 134399 3000
21/32 134429 800 134428 280043/64–17mm TBA 700 134431 2800
11/16–17.5mm 134433 700 134434 280045/64–18mm TBA 600 TBA 2600
23/32–18.5mm 134448 600 134446 25003/4–19mm 134454 600 134453 2400
49/64–19.5mm TBA 600 TBA 220025/32–20mm 134476 600 134475 2200
13/16–20.5mm 134480 500 134477 220027/32–21.5mm TBA 500 TBA 2000
7/8–22mm 134481 500 134482 2000
Corner Key Size
Packaging Information
Small Carton Large CartonPart # Pieces Part # Pieces
Part numbers shown are natural nylon.
C–60
LPD WANylon
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
A
BC.225
(5.72 mm)
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)C, ± .005 (.127mm)
11/64–4.5mm .177 .168 .1243/16–5mm .188 .178 .134
7/32–5.5mm .219 .208 .164 15/64–6mm .236 .226 .182 1/4–6.5mm .250 .240 .196
17/64 .266 .256 .212 9/32–7mm .281 .271 .227
19/64–7.5mm .297 .286 .242 5/16–8mm .313 .303 .259
8.5mm .335 .325 .281 11/32 .344 .334 .289
23/64–9mm .359 .349 .300 3/8–9.5mm .375 .365 .321
25/64–10mm .391 .384 .340 13/32–10.5mm .406 .396 .352
7/16–11mm .438 .427 .383 29/64–11.5mm .453 .443 .399 15/32–12mm .469 .458 .414
31/64–12.5mm .484 .482 .424 1/2 .500 .490 .440
33/64–13mm .516 .502 .455 17/32–13.5mm .531 .521 .471 35/64–14mm .547 .541 .491 9/16–14.5mm .563 .552 .501 19/32–15mm .594 .586 .534
39/64–15.5mm .609 .600 .550 5/8–16mm .625 .615 .565
21/32 .656 .646 .596 43/64–17mm .672 .659 .609
11/16–17.5mm .688 .678 .628 45/64–18mm .703 .699 .648
23/32–18.5mm .719 .708 .658 3/4–19mm .750 .740 .690
49/64–19.5mm .766 .758 .708 25/32–20mm .781 .771 .721
13/16–20.5mm .813 .803 .752 27/32–21.5mm .844 .834 .784
7/8–22mm .875 .865 .815
Corner Key Size
DecimalEquivalent
Specificationin Inches
A B
C–61
LPD WANylon
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
11/64–4.5mm TBA 2600 133895 100003/16–5mm TBA 2500 133896 9500
7/32–5.5mm 133901 2400 133899 850015/64–6mm 133905 2200 133906 80001/4–6.5mm 300205 2000 133907 7500
17/64 TBA 1800 TBA 65009/32–7mm 133916 1800 133913 6500
19/64–7.5mm TBA 1600 133921 60005/16–8mm 133924 1500 133925 5600
8.5mm TBA 1400 133931 500011/32 133934 1300 133932 5000
23/64–9mm TBA 1300 133937 48003/8–9.5mm 133944 1200 133941 4400
25/64–10mm TBA 1000 133951 420013/32–10.5mm 133955 1000 133953 4000
7/16–11mm 300900 1000 133958 360029/64–11.5mm TBA 900 133963 340015/32–12mm 133972 900 133967 3400
31/64–12.5mm TBA 900 300733 33001/2 133979 900 133977 3200
33/64–13mm TBA 900 133990 320017/32–13.5mm 133994 800 133991 300035/64–14mm TBA 800 133998 28009/16–14.5mm 300901 800 134000 280019/32–15mm 134008 700 134006 2600
39/64–15.5mm 302422 700 134011 25005/8–16mm 134013 700 134012 2400
21/32 134022 600 134021 220043/64–17mm TBA 600 134024 2200
11/16–17.5mm 300902 600 134025 220045/64–18mm TBA 500 TBA 2000
23/32–18.5mm 134030 500 134028 20003/4–19mm 301587 500 134034 2000
49/64–19.5mm TBA 400 TBA 180025/32–20mm TBA 400 TBA 1800
13/16–20.5mm 134040 400 134041 180027/32–21.5mm TBA 400 TBA 1800
7/8–22mm 302192 400 301760 1800
Corner Key Size
Packaging Information
Small Carton Large CartonPart # Pieces Part # Pieces
Part numbers shown are natural nylon.
C–62
LPD BINylon
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
A
BC.225
(5.72 mm)
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)C, ± .005 (.127mm)
3/16–5mm .188 .178 .1347/32–5.5mm .219 .208 .16415/64–6mm .236 .226 .1821/4–6.5mm .250 .240 .196
17/64 .266 .256 .2129/32–7mm .281 .271 .227
19/64–7.5mm .297 .286 .2425/16–8mm .313 .303 .259
11/32 .344 .334 .28923/64–9mm .359 .349 .3003/8–9.5mm .375 .365 .321
25/64–10mm .391 .384 .34013/32–10.5mm .406 .396 .352
7/16–11mm .438 .427 .38329/64–11.5mm .453 .443 .39915/32–12mm .469 .458 .414
31/64–12.5mm .484 .474 .4241/2 .500 .490 .440
33/64–13mm .516 .502 .45517/32–13.5mm .531 .521 .47135/64–14mm .547 .541 .4919/16–14.5mm .563 .552 .50119/32–15mm .594 .584 .534
39/64–15.5mm .609 .600 .5505/8–16mm .625 .615 .565
21/32 .656 .646 .59643/64–17mm .672 .659 .609
11/16–17.5mm .688 .678 .62845/64–18mm .703 .669 .648
23/32–18.5mm .719 .708 .6583/4–19mm .750 .740 .690
49/64–19.5mm .766 .751 .70825/32–20mm .781 .771 .721
13/16–20.5mm .813 .803 .75227/32–21.5mm .844 .834 .784
7/8–22mm .875 .865 .815
Corner Key Size
DecimalEquivalent
Specification in Inches
A B
C 63
LPD BINylon
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
3/16 5mm 134139 2500 301268 95007/32 5.5mm 134060 2400 134061 850015/64 6mm TBA 2200 TBA 80001/4 6.5mm 134068 2000 134066 7500
17/64 TBA 1800 TBA 65009/32 7mm TBA 1800 300812 6500
19/64 7.5mm 134070 1600 134071 60005/16 8mm TBA 1500 134072 5600
11/32 134078 1300 134080 500023/64 9mm 134082 1300 134083 48003/8 9.5mm 302495 1200 134084 4400
25/64 10mm TBA 1200 TBA 420013/32 10.5mm 134090 1000 134089 4000
7/16 11mm TBA 1000 134092 360029/64 11.5mm TBA 900 134095 340015/32 12mm 134096 900 134097 3400
31/64 12.5mm TBA 900 TBA TBA1/2 TBA 900 134109 3200
33/64 13mm 302945 900 302557 320017/32 13.5mm 134114 800 134115 300035/64 14mm TBA 800 TBA 28009/16 14.5mm TBA 800 134118 280019/32 15mm 134124 700 134122 2600
39/64 15.5mm TBA 700 TBA 25005/8 16mm 134125 700 134126 2400
21/32 134130 600 134131 220043/64 17mm TBA 600 TBA 2200
11/16 17.5mm TBA 600 134132 220045/64 18mm TBA 500 TBA 2000
23/32 18.5mm 134133 500 134134 20003/4 19mm TBA 500 134137 2000
49/64 19.5mm TBA 400 TBA 180025/32 20mm TBA 400 TBA 1800
13/16 20.5mm TBA 400 TBA 180027/32 21.5mm TBA 300 TBA 1600
7/8 22mm TBA 300 TBA 1600
Corner Key Size
Packaging InformationSmall Carton Large Carton
Part # Pieces Part # Pieces
Part numbers shown are natural nylon.
C–64
LPD Straight ConnectorNylon
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
A
B .218(5.53mm)
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)
11/64–4.5mm .177 .1333/16–5mm .187 .1531/4–6.5mm .250 .2069/32–7mm .281 .2375/16–8mm .313 .269
11/32 .344 .3003/8–9.5mm .375 .331
13/32 .406 .3627/16–11mm .438 .393
15/32–12mm .469 .4241/2 .500 .450
17/32–13.5mm .531 .4819/16–14.5mm .563 .511
5/8–16mm .625 .57511/16–17.5mm .688 .638
3/4–19mm .750 .702
Connector Size
DecimalEquivalent
Specification in Inches
A
C 65
LPD Straight ConnectorNylon
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
11/64 4.5mm TBA 3500 TBA 130003/16 5mm 300219 3000 TBA 120001/4 6.5mm 134525 2000 134483 78009/32 7mm TBA 2000 TBA 65005/16 8mm 134487 1800 134489 6200
11/32 301112 1600 301265 58003/8 9.5mm 134532 1400 134490 5400
13/32 302946 1200 302576 48007/16 11mm 134491 1200 134492 4500
15/32 12mm 134493 1100 300724 42001/2 134494 1000 134495 4000
17/32 13.5mm 302940 1000 TBA 35009/16 14.5mm 134496 900 134497 3200
5/8 16mm 134498 800 300725 260011/16 17.5mm TBA TBA TBA 2600
3/4 19mm TBA TBA TBA TBA
Connector Size
Packaging InformationSmall Carton Large Carton
Part # Pieces Part # Pieces
Part numbers shown are natural nylon.
C–66
LPD Straight Connector PDGlass-Filled Nylon
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
*C = .210
A B
C.2175.51mm
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)
3/16–5mm* .188 .143 .0737/32–5.5mm* .219 .174 .10415/64–6mm* .236 .192 .1121/4–6.5mm* .250 .206 .126
17/64* .256 .222 .1429/32–7mm* .281 .237 .157
19/64–7.5mm* .297 .252 .1725/16–8mm* .313 .262 .162
11/32* .344 .294 .17423/64–9mm* .359 .309 .1893/8–9.5mm .375 .325 .185
25/64-10mm .391 .344 .20413/32–10.5mm .406 .356 .216
7/16–11mm .438 .387 .24729/64–11.5mm .453 .403 .26315/32–12mm .469 .418 .278
31/64–12.5mm .484 .442 .3021/2 .500 .450 .310
33/64–13mm .516 .462 .32217/32–13.5mm .531 .481 .34135/64–14mm .547 .501 .3619/16–14.5mm .563 .512 .37219/32–15mm .594 .544 .404
39/64–15.5mm .609 .560 .4205/8–16mm .625 .575 .435
21/32 .656 .606 .46643/64–17mm .669 .625 .484
11/16–17.5mm .688 .644 .50223/32–18.5mm .719 .674 .534
3/4–19mm .750 .706 .56625/32–20mm .781 .737 .597
13/16–20.5mm .813 .769 .6297/8–22mm .875 .825 .685
Connector Size
DecimalEquivalent
Specification in Inches
A B
C 67
LPD Straight Connector PDGlass Filled Nylon
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
3/16 5mm 300732 2000 TBA TBA7/32 5.5mm 134579 2000 300193 700015/64 6mm 134583 1800 134580 66001/4 6.5mm 300912 1800 134586 6500
17/64 300164 1800 134589 64009/32 7mm 300736 1700 300194 6000
19/64 7.5mm 300165 1600 134591 50005/16 8mm 134592 1500 134595 4800
11/32 134600 1500 134602 470023/64 9mm 134603 1400 134604 46003/8 9.5mm 134605 1400 134607 4500
25/64 10mm 134614 1200 134613 440013/32 10.5mm 134616 1200 300316 4300
7/16 11mm 300662 1100 134617 400029/64 11.5mm 134568 1100 134569 400015/32 12mm 134622 1100 134623 3900
31/64 12.5mm 300187 1100 134570 38001/2 134638 1100 134634 3800
33/64 13mm 302947 1000 301289 360017/32 13.5mm 134644 1000 134643 360035/64 14mm 134647 1000 134648 36009/16 14.5mm 300423 900 134651 340019/32 15mm 134653 800 134654 3200
39/64 15.5mm 300376 800 300688 30005/8 16mm 134661 800 134663 3000
21/32 300191 800 134667 280043/64 17mm TBA TBA 302207 2600
11/16 17.5mm 300198 700 134573 250023/32 18.5mm 134670 700 300785 2200
3/4 19mm 134672 600 134673 200025/32 20mm 134678 600 301348 1800
13/16 20.5mm 302896 600 302449 18007/8 22mm TBA TBA 302684 1800
Connector Size
Packaging InformationSmall Carton Large Carton
Part # Pieces Part # Pieces
Part numbers shown are natural nylon.
C–68
LPD Kronenberg ConnectorSteel
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
2.36 (59.944mm)
ABC
3/16–4.5mm .188 .142 .146 .16513/64–5mm .203 .150 .157 .1697/32–5.5mm .219 .189 .197 .2091/4–6.5mm .250 .228 .236 .2409/32–7mm .281 .236 .244 .260
19/64–7.5mm .297 .276 .280 .2835/16–8mm .313 .287 .295 .303
11/32–8.5mm .344 .295 .307 .31411/32–9mm .344 .323 .331 .3353/8–9.5mm .375 .346 .358 .364
13/32–10mm .406 .394 .398 .41327/64–10.5mm .422 .398 .402 .413
7/16–11mm .438 .402 .406 .40929/64–11.5mm .453 .425 .433 .44515/32–12mm .469 .437 .441 .4531/2–13mm .500 .465 .469 .480
17/32–14mm .531 .512 .516 .5209/16–14.5mm .563 .543 .547 .56319/32–15mm .594 .551 .559 .575
15.5mm .610 .585 .593 .6065/8–16mm .625 .594 .598 .602
21/32–17mm .656 .622 .626 .65011/16–17.5mm .688 .661 .665 .67723/32–18.5mm .719 .701 .709 .713
3/4–19mm .750 .711 .720 .732
Connector Size
DecimalEquivalent
Specification in Inches
A B C
For Anodized Aluminum Air Spacers
TOLERANCEA, - .000 + .006B, - .000 + .006C, - .000 + .006
C–69
LPD Kronenberg ConnectorSteel
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
3/16–4.5mm 134753 250013/64–5mm 134755 25007/32–5.5mm 134757 25001/4–6.5mm 134761 25009/32–7mm 134762 2500
19/64–7.5mm 134764 25005/16–8mm 134765 2500
11/32–8.5mm 206699 250011/32–9mm 134768 25003/8–9.5mm 134767 2500
13/32–10mm 134783 250027/64–10.5mm 134771 2500
7/16–11mm 134770 250029/64–11.5mm 134772 250015/32–12mm 134773 25001/2–13mm 134774 2500
17/32–14mm 134784 25009/16–14.5mm 134778 250019/32–15mm 134789 2500
15.5mm 211132 20005/8–16mm 134779 2000
21/32–17mm 134790 150011/16–17.5mm 134780 150023/32–18.5mm 134791 1500
3/4–19mm 209972 1500
Connector Size
Packaging Information
Part # Pieces
For Anodized Aluminum Air Spacers
LPX Kronenberg Connector Specifications . . . . . . . . . . . . . . . . . .C-72
LPX Kronenberg Connector Packaging . . . . . . . . . . . . . . . . . . . . .C-73
L P X K R O N E N B E R G C O N N E C T O R S
C 71
C 72
LPX Kronenberg ConnectorSteel
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
2.36 (59.944mm)
ABC
1/4 6.4mm .250 .220 .228 .2365/16 8mm .313 .283 .291 .3073/8 9.5mm .375 .349 .354 .362
7/16 11.1mm .438 .409 .417 .42515/32 11.9mm .468 .441 .449 .457
1/2 13mm .500 .472 .480 .48417/32 13.5mm .531 .518 .518 .5269/16 14.3mm .563 .535 .543 .54719/32 15.1mm .593 .567 .571 .5795/8 15.9mm .625 .600 .608 .620
21/32 16.7mm .656 .630 .634 .64211/16 17.5mm .688 .661 .665 .67323/32 18.3mm .718 .693 .697 .7053/4 19.1mm .750 .720 .728 .736
Connector Size
DecimalEquivalent
Specification in Inches
A B C
TOLERANCEA, .000 + .006B, .000 + .006C, .000 + .006
For Anodized Aluminum Air Spacers
C 73
LPX Kronenberg ConnectorSteel
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
1/4 6.4mm 212531 25005/16 8mm 212532 25003/8 9.5mm 212058 2500
7/16 11.1mm 212306 250015/32 11.9mm 217590 2500
1/2 13mm 134932 250017/32 13.5mm 217589 25009/16 14.3mm 211896 250019/32 15.1mm 217588 20005/8 15.9mm 212307 2000
21/32 16.7mm 217487 150011/16 17.5mm 212308 150023/32 18.3mm 217486 15003/4 19.1mm 211994 1500
Connector Size
Packaging Information
Part # Pieces
For Anodized Aluminum Air Spacers
2 5 0 P C O N N E C T O R S
250P Straight Connector PD Specifications . . . . . . . . . . . . . . . . . .C-76
250P Straight Connector PD Packaging . . . . . . . . . . . . . . . . . . . . .C-77
250P Kronenberg Connector Specifications . . . . . . . . . . . . . . . . . .C-78
250P Kronenberg Connector Packaging . . . . . . . . . . . . . . . . . . . .C-79
C 75
C 76
250P Straight Connector PDGlass Filled Nylon
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
.250(6.35mm)
A
A
B
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)
3/16 5mm .188 .148 .0727/32 5.5mm .219 .178 .098
6mm .236 .196 .1161/4 .250 .210 .120
9/32 7mm .281 .241 .1515/16 8mm .313 .272 .182
11/32 .344 .304 .21423/64 9mm .359 .319 .2293/8 9.5mm .375 .335 .2257/16 11mm .438 .397 .28715/32 12mm .469 .429 .319
1/2 .500 .460 .350
Connector Size
DecimalEquivalent
Specification in Inches
A B
C 77
250P Straight Connector PDGlass Filled Nylon
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
3/16 5mm 301164 2000 301082 75007/32 5.5mm 300089 2000 300090 7000
6mm TBA 1800 300951 70001/4 301165 1800 301083 6500
9/32 7mm 300137 1500 301084 60005/16 8mm 300091 1300 300092 4800
11/32 301199 1200 301206 420023/64 9mm TBA 1100 300707 40003/8 9.5mm 301370 1000 301181 40007/16 11mm 300093 900 300094 300015/32 12mm TBA 800 302463 3000
1/2 301371 700 301296 2600
Connector Size
Packaging Information
Small Carton Large CartonPart # Pieces Part # Pieces
Part numbers shown are natural nylon.
Connector Size
DecimalEquivalent
Specification in Inches
A B C
C 78
250P Kronenberg ConnectorSteel
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
2.36 (59.944mm)
ABC
3/16 5mm .188 .173 .177 .1937/32 5.5mm .219 .201 .205 .2171/4 6.4mm .250 .236 .244 .2529/32 7mm .281 .262 .270 .2835/16 8mm .313 .287 .295 .303
11/32 8.8mm .344 .327 .331 .343
9/32 7mm .281 .264 .268 .27611/32 8.8mm .344 .323 .327 .346
13/32 10.5mm .406 .382 .386 .39415/32 12mm .469 .443 .451 .457.485 12.56mm .485 .476 .480 .484
1/2 13 12.56mm .500 .484 .488 .50017/32 13.5mm .531 .516 .520 .53219/32 15.5mm .594 .587 .591 .60421/32 17mm .656 .640 .644 .661
23/32 18.5mm .719 .701 .705 .715
Connector Size
DecimalEquivalent
Specification in Inches
A B C
For EG Steel Air Spacers
For Anodized Aluminum Air Spacers
TOLERANCEA, .000 + .006B, .000 + .006C, .000 + .006
C 79
250P Kronenberg ConnectorSteel
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
3/16 5mm 211167 25007/32 5.5mm 211168 25001/4 6.4mm 211169 25009/32 7mm 211170 25005/16 8mm 211755 2500
11/32 8.8mm 211171 2500
Connector Size
Packaging Information
Part # Pieces
For EG Steel Air Spacers
For Anodized Aluminum Air Spacers
9/32 7mm 215101 250011/32 8.8mm 214954 2500
13/32 10.5mm 214203 2500 15/32 12mm 215603 2500.485 12.56mm 134795 25001/2 13 12.56 211374 2500
17/32 13.5mm 214204 2500 19/32 15.5mm 215068 2000 21/32 17mm 215604 1500
23/32 18.5mm 215605 1500
Connector Size
Packaging Information
Part # Pieces
B U T Y L B E A D K E Y S
Butyl Bead Ultra-Loc WA w/ Vent Specifications . . . . . . . . . . . .C-82
Butyl Bead Ultra-Loc WA w/ Vent Packaging . . . . . . . . . . . . . . .C-83
Butyl Bead Ultra-Loc - Butyl Inject Specifications . . . . . . . . . . . .C-84
Butyl Bead Ultra-Loc - Butyl Inject Packaging . . . . . . . . . . . . . . .C-85
C 81
C 82 Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Butyl Bead Ultra-Loc WA w/ VentNylon
B
A
Vent
C.312
(7.92mm)
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)C, ± .005 (.127mm)
13/64 .203 .133 .1937/32 5.5mm .219 .148 .20815/64 6mm .234 .164 .2241/4 6.5mm .250 .180 .240
17/64 .266 .197 .2579/32 7mm .281 .211 .271
19/64 7.5mm .297 .226 .2865/16 8mm .313 .246 .303
21/64 .328 .258 .31811/32 .344 .274 .334
23/64 9mm .359 .289 .3493/8 9.5mm .375 .305 .365
25/64 10mm .391 .320 .38313/32 .406 .336 .39627/64 .422 .349 .412
7/16 11mm .438 .364 .42729/64 11.5mm .453 .380 .44315/32 12mm .469 .398 .458
31/64 12.5mm .484 .411 .4741/2 .500 .427 .490
33/64 13mm .516 .442 .50517/32 13.5mm .531 .455 .52135/64 14mm .547 .474 .5379/16 14.5mm .563 .489 .552
37/64 .548 .505 .56819/32 15mm .594 .518 .584
39/64 15.5mm .609 .533 .5995/8 16mm .625 .552 .615
41/64 16.5mm .641 .565 .63121/32 .656 .580 .646
43/64 17mm .672 .596 .66211/16 17.5mm .688 .612 .67845/64 18mm .703 .627 .693
23/32 18.5mm .719 .643 .70947/64 .734 .658 .724
3/4 19mm .750 .674 .74049/64 19.5mm .766 .690 .75625/32 20mm .781 .705 .771
51/64 .797 .721 .78713/16 20.5mm .813 .737 .803
Corner Key Size
DecimalEquivalent
Specification in Inches
A B
C 83
Butyl Bead Ultra-Loc WA w/ VentNylon
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
13/64 TBA 1500 131271 48007/32 5.5mm 300099 1400 300098 440015/64 6mm TBA 1100 131274 40001/4 6.5mm 302509 1100 131275 3700
17/64 TBA 1000 131276 35009/32 7mm TBA 1000 300974 3300
19/64 7.5mm TBA 900 131277 33005/16 8mm 301708 900 301068 3000
21/64 TBA 800 TBA 300011/32 TBA 800 131278 2700
23/64 9mm TBA 800 131279 26003/8 9.5mm 302511 700 301069 2400
25/64 10mm TBA 700 TBA 230013/32 TBA 600 300975 220027/64 TBA 600 131281 2000
7/16 11mm 302510 600 301267 190029/64 11.5mm 131282 500 131283 180015/32 12mm TBA 500 300976 1800
31/64 12.5mm TBA 500 131285 18001/2 300565 500 131286 1700
33/64 13mm TBA 500 TBA 170017/32 13.5mm TBA 500 300977 160035/64 14mm TBA 500 131290 16009/16 14.5mm 131292 400 131293 1500
37/64 TBA 400 TBA 140019/32 15mm TBA 400 300978 1400
39/64 15.5mm TBA 400 131294 14005/8 16mm 302512 400 131295 1400
41/64 16.5mm 131296 400 131297 130021/32 TBA 400 300979 1200
43/64 17mm TBA 300 131298 120011/16 17.5mm 302513 300 302086 120045/64 18mm TBA 300 131299 1100
23/32 18.5mm 302470 300 300980 110047/64 TBA 300 131300 1100
3/4 19mm 131301 300 131302 100049/64 19.5mm 131303 300 131304 100025/32 20mm TBA 300 300517 1000
51/64 TBA 300 131305 100013/16 20.5mm TBA 300 301782 900
Corner Key Size
Packaging Information
Small Carton Large CartonPart # Pieces Part # Pieces
Part numbers shown are natural nylon.
C 84
Butyl Bead Ultra-Loc - Butyl InjectGlass Filled Nylon
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
B
AC.312
(7.92mm)
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)C, ± .005 (.127mm)
7/32 5.5mm .219 .148 .20815/64 6mm .234 .164 .2241/4 6.5mm .250 .180 .240
17/64 .266 .197 .2579/32 7mm .281 .211 .271
19/64 7.5mm .297 .226 .2865/16 8mm .313 .246 .303
21/64 .328 .258 .31811/32 .344 .274 .334
23/64 9mm .359 .289 .3493/8 9.5mm .375 .305 .365
25/64 10mm .391 .320 .38313/32 .406 .336 .39627/64 .422 .349 .412
7/16 11mm .438 .364 .42729/64 11.5mm .453 .380 .44315/32 12mm .469 .398 .458
31/64 .484 .411 .4741/2 .500 .427 .490
33/64 13mm .516 .442 .50517/32 13.5mm .531 .455 .52135/64 14mm .547 .474 .5379/16 14.5mm .563 .489 .552
37/64 .548 .505 .56819/32 15mm .594 .518 .584
39/64 15.5mm .609 .533 .5995/8 16mm .625 .552 .615
41/64 .641 .565 .63121/32 .656 .580 .646
43/64 17mm .672 .596 .66211/16 17.5mm .688 .612 .67845/64 18mm .703 .627 .693
23/32 18.5mm .719 .643 .70947/64 .734 .658 .724
3/4 19mm .750 .674 .74025/32 20mm .781 .705 .771
51/64 .797 .721 .78713/16 20.5mm .813 .737 .803
Corner Key Size
DecimalEquivalent
Specification in Inches
A B
C 85
Butyl Bead Ultra-Loc - Butyl InjectGlass Filled Nylon
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
7/32 5.5mm TBA TBA TBA TBA15/64 6mm TBA TBA TBA TBA1/4 6.5mm 131337 1100 131338 3700
17/64 TBA TBA TBA TBA9/32 7mm TBA TBA TBA TBA
19/64 7.5mm TBA TBA TBA TBA5/16 8mm 131339 900 TBA 3000
21/64 TBA TBA TBA TBA11/32 TBA 800 131340 2700
23/64 9mm 131341 800 131342 26003/8 9.5mm 131343 700 131344 2400
25/64 10mm TBA TBA TBA TBA13/32 TBA TBA TBA TBA27/64 TBA TBA TBA TBA
7/16 11mm TBA 600 131348 190029/64 11.5mm TBA TBA TBA TBA15/32 12mm TBA TBA TBA TBA
31/64 TBA 500 301707 18001/2 TBA 500 131349 1700
33/64 13mm TBA TBA TBA TBA17/32 13.5mm TBA TBA TBA TBA35/64 14mm TBA TBA TBA TBA9/16 14.5mm TBA 400 131352 1500
37/64 TBA 400 TBA TBA19/32 15mm TBA 400 TBA TBA
39/64 15.5mm TBA 400 TBA TBA5/8 16mm TBA 400 131353 1400
41/64 TBA TBA TBA TBA21/32 TBA TBA TBA TBA43/64 TBA TBA TBA TBA
11/16 17.5mm TBA 300 301732 120045/64 18mm TBA 300 TBA TBA
23/32 18.5mm TBA 300 131356 110047/64 TBA 300 TBA TBA
3/4 19mm TBA 300 TBA TBA25/32 20mm TBA 300 131357 1000
51/64 TBA 300 TBA 100013/16 20.5mm TBA TBA TBA TBA
Corner Key Size
Packaging Information
Small Carton Large CartonPart # Pieces Part # Pieces
Part numbers shown are natural nylon.
D L S K E Y SA N D C O N N E C T O R S
DLS Fixed Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-88
DLS Fixed Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-89
DLS WA Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-90
DLS WA Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-91
DLS BI Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-92
DLS BI Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-93
DLS Folding Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-94
DLS Folding Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-95
DLS Straight Connector Specifications . . . . . . . . . . . . . . . . . . . . .C-96
DLS Straight Connector Packaging . . . . . . . . . . . . . . . . . . . . . . . .C-97
DLS Straight Connector PD Specifications . . . . . . . . . . . . . . . . . .C-98
DLS Straight Connector PD Packaging . . . . . . . . . . . . . . . . . . . . .C-99
C 87
C 88 Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
DLS FixedNylon
Part APart A
Part B
1/2 .500 .093 .2459/16 .563 .125 .2765/8 .625 .194 .308
11/16 .688 .187 .3393/4 .750 .255 .370
Part B
1/2 .500 .093 .2459/16 .563 .125 .2765/8 .625 .194 .308
11/16 .688 .187 .3393/4 .750 .255 .370
Corner Key Size
Inches inDecimal
Specification inInches
A B
Corner Key Size
DecimalEquivalent
Specificationin Inches
A B
A
B
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)
A
B
TOLERANCEA, ± .005 .127mmB, ± .005 .127mm
C 89Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
DLS FixedNylon
1/2 TBA 1200 134816 45009/16 TBA 1200 134817 44005/8 TBA 1000 134818 4000
11/16 TBA 1000 134819 42003/4 302519 800 134820 3200
1/2 TBA 1200 134821 45009/16 TBA 1200 134823 44005/8 TBA 1000 134824 4000
11/16 TBA 1000 134825 42003/4 302520 800 134826 3200
Part A
Part B
Corner Key Size
Packaging Information
Small Carton Large CartonPart # Pieces Part # Pieces
Corner Key Size
Packaging Information
Small Carton Large CartonPart # Pieces Part # Pieces
Part numbers shown are natural nylon.
Part numbers shown are natural nylon.
C 90 Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
DLS WANylon
Part A
1/2 .500 .093 .2459/16 .563 .125 .2765/8 .625 .194 .308
11/16 .688 .187 .3393/4 .750 .255 .370
Part B
1/2 .500 .093 .2459/16 .563 .125 .2765/8 .625 .194 .308
11/16 .688 .187 .3393/4 .750 .255 .370
Corner Key Size
DecimalEquivalent
Specificationin Inches
A B
Corner Key Size
DecimalEquivalent
Specificationin Inches
A B
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)
A
B
A
B
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)
Part A
Part B
C 91Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
DLS WANylon
1/2 134884 1200 134883 42009/16 TBA 1000 134886 40005/8 TBA 1000 134887 3400
11/16 134889 1000 134888 36003/4 302506 700 134890 2800
Corner Key Size
Packaging Information
Small Carton Large CartonPart # Pieces Part # Pieces
Part A
1/2 134892 1200 134891 42009/16 TBA 1000 134894 40005/8 TBA 1000 134895 3400
11/16 134897 1000 134896 36003/4 302507 700 134898 2800
Part B
Corner Key Size
Packaging Information
Small Carton Large CartonPart # Pieces Part # Pieces
Part numbers shown are natural nylon.
Part numbers shown are natural nylon.
C 92
DLS BINylon
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Part AB
AC.312
(7.92mm)
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)
B
AC
.312(7.92mm)
29/64 11.5mm .453 .106 .2171/2 .500 .136 .247
5/8 16mm .625 .193 .3043/4 19mm .750 .257 .368
Part B
Part A
Part B
29/64 11.5mm .453 .106 .2171/2 .500 .136 .247
5/8 16mm .625 .193 .3043/4 19mm .750 .257 .368
Corner Key Size
DecimalEquivalent
Specification in Inches
A B
Corner Key Size
DecimalEquivalent
Specification in Inches
A B
C 93
DLS BINylon
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
29/64 11.5mm 302082 1400 134710 50001/2 300374 1200 134711 4400
5/8 16mm 134714 1000 134713 30003/4 19mm 134720 800 134718 2500
29/64 11.5mm 302083 1400 134726 50001/2 300375 1200 134727 4400
5/8 16mm 134731 1000 134729 30003/4 19mm 134733 800 134732 2500
Part A
Part B
Corner Key Size
Packaging Information
Small Carton Large CartonPart # Pieces Part # Pieces
Corner Key Size
Packaging Information
Small Carton Large CartonPart # Pieces Part # Pieces
Part numbers shown are natural nylon.
Part numbers shown are natural nylon.
C 94
DLS FoldingNylon
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
B A
C .296(7.52mm)
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)C, ± .005 (.127mm)
29/64 11.5mm .453 .106 .2211/2 .500 .138 .245
5/8 16mm .625 .200 .3063/4 19mm .750 .262 .368
Corner Key Size
DecimalEquivalent
Specification inInches
A B
C 95
DLS FoldingNylon
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
29/64 11.5mm TBA 1600 134738 52001/2 TBA 1500 134739 5200
5/8 16mm 134743 1200 134741 40003/4 19mm 134746 1000 134744 3000
Corner Key Size
Packaging Information
Small Carton Large CartonPart # Pieces Part # Pieces
Part numbers shown are natural nylon.
C 96
DLS Straight ConnectorNylon
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
A
B
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)
3/4 19mm .750 .290 .270
Connector Size
DecimalEquivalent
Specificationin Inches
A B
C 97
DLS Straight ConnectorNylon
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
3/4 19mm 134750 1000 TBA TBA
Connector Size
Packaging Information
Small Carton Large CartonPart # Pieces Part # Pieces
Part numbers shown are natural nylon.
C 98
DLS Straight Connector PDGlass Filled Nylon
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
1.000(25.4mm)2.000
(50.8mm)
.290(7.37mm)
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)
3/4 19mm .750 .290 .270
Connector Size
DecimalEquivalent
Specification in Inches
A B
C 99
DLS Straight Connector PDGlass Filled Nylon
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
3/4 19mm TBA TBA TBA TBA
ConnectorSize
Packaging Information
Small Carton Large CartonPart # Pieces Part # Pieces
Part numbers shown are natural nylon.
L P S F I X E D C O R N E R K E Y S
LPS Fixed Corner Keys Specifications . . . . . . . . . . . . . . . . . . . . .C-102
LPS Fixed Corner Keys Packaging . . . . . . . . . . . . . . . . . . . . . . . .C-103
C 101
C 102 Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
LPS1 Fixed Corner Keys
7/32-5.5 mm .219 .214 .1886 mm .236 .232 .2061/4 .250 .246 .220
6.5 mm .256 .252 .22617/64 .266 .261 .235
9/32-7 mm .281 .277 .25119/64-7.5 mm .297 .292 .266
5/16-8 mm .313 .308 .28221/64-8.5 mm .328 .331 .305
11/32 .344 .340 .31423/64-9 mm .359 .350 .3243/8-9.5 mm .375 .371 .345
10.1 mm .394 .394 .36813/32-10.5 mm .406 .402 .376
7/16-11 mm .438 .433 .40729/64-11.5 mm .453 .449 .42315/32-12 mm .469 .464 .438
12.5 mm .492 .488 .4621/2 .500 .496 .470
33/64-13.1 mm .516 .512 .48617/32-13.5 mm .532 .527 .50135/64-14 mm .547 .547 .5219/16-14.5 mm .563 .558 .53219/32-15 mm .594 .590 .564
39/64-15.5 mm .609 .606 .5805/8-16 mm .625 .621 .595
21/32 656 652 .62643/64-17 mm .672 .665 .639
11/16-17.5 mm .688 .684 .65818 mm .709 .705 .67923/32 .719 .714 .688
18.5 mm .728 .724 .6983/4-19 mm .750 .746 .720
49/64-19.5 mm .766 .764 .73825/32-20 mm .781 .777 .751
13/16 .813 .808 .78227/32-21.5 mm .844 .839 .813
BA
Specifications in InchesDecimal
EquivalentCorner Key
Size
A
C.242
6.15mmB
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)C, ± .005 (.127mm)
C 103
LPS1 Fixed Corner Keys
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
7/32-5.5 mm TBA TBA 302913 65006 mm TBA TBA TBA TBA
1/4 mm TBA TBA 302686 65006.5 mm TBA TBA TBA TBA
17/64 mm TBA TBA TBA TBA9/32-7 mm TBA TBA 302914 6000
19/64-7.5 mm 129711 1600 TBA TBA5/16-8 mm 301592 1500 302692 5000
21/64-8.5 mm TBA TBA 302908 500011/32 mm TBA TBA TBA TBA
23/64-9 mm TBA TBA TBA TBA3/8-9.5 mm 129712 1300 302963 4500
10.1 mm TBA TBA TBA TBA13/32-10.5 mm 300763 1300 300757 4600
7/16-11 mm 300764 1200 300758 420029/64-11.5 mm 300765 1000 300759 400015/32-12 mm 300766 1000 300760 3800
12.5 mm TBA TBA TBA TBA1/2 mm TBA TBA 300991 3500
33/64-13.1 mm TBA TBA TBA TBA17/32-13.5 mm TBA TBA 301783 340035/64-14 mm TBA TBA TBA TBA9/16-14.5 mm TBA TBA 302687 300019/32-15 mm TBA TBA 302770 3000
39/64-15.5 mm TBA TBA 129716 27005/8-16 mm TBA TBA 300710 270021/32 mm TBA TBA 302728 2600
43/64-17 mm TBA TBA 302688 250011/16-17.5 mm TBA TBA 300179 2400
18 mm TBA TBA TBA TBA23/32 mm TBA TBA TBA TBA18.5 mm TBA TBA TBA TBA
3/4-19 mm TBA TBA 302689 210049/64-19.5 mm 129717 600 129718 210025/32-20 mm TBA TBA TBA TBA
13/16 mm TBA TBA TBA TBA27/32-21.5 mm 300183 500 300182 1900
Pieces Part #
Packaging InformationCorner Key
Size Small Carton
PiecesPart #
Large Carton
M U N T I N B A R
Muntin Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D-2
Powder-Coated Muntin Bar . . . . . . . . . . . . . . . .D-3
Exterior Muntin Bar . . . . . . . . . . . . . . . . . . . . . . .D-4
Finned Muntin Bar Keeper - Solid Prong . . . . .D-5
Finned Muntin Bar Keeper - Barbed Prong . . .D-6
Solid Muntin Bar Keeper . . . . . . . . . . . . . . . . . .D-7
Finned Muntin Bar Keeper w/Pad . . . . . . . . . .D-8
Finned Muntin Bar Keeper w/Pad . . . . . . . . . .D-9
Muntin Bar Locator . . . . . . . . . . . . . . . . . . . . . .D-10
Muntin Bar Locator w/ Pad . . . . . . . . . . . . . . .D-11
Internal Muntin Bar Clip . . . . . . . . . . . . . . . . . .D-12
Finned Muntin Bar Flexible Keeper - Barbed Prong . . . . . . . . . . . . . . . . . . . .D-13
Adjustable Muntin Bar Connector . . . . . . . . . .D-14
Variable Angle Internal Muntin Bar Connector . . . . . . . . . . . . . . . . . . . .D-15
Multi-Position Starburst (MPS) Hub . . . . . . . .D-16
Quarter Round MPS Hub . . . . . . . . . . . . . . . . .D-17
Finned MPS Muntin Bar Keeper . . . . . . . . . . .D-18
MPS Hub Pad . . . . . . . . . . . . . . . . . . . . . . . . . . .D-19
Finned Muntin Bar Keeper w/ Stabilizer Pad . . . . . . . . . . . . . . . . . . . . . . . .D-20
Finned Muntin Bar Keeper w/ Stabilizer Pad . . . . . . . . . . . . . . . . . . . . . . . .D-21
Starburst Muntin Bar Keeper - 3 Position . . . . . . . . . . . . . . . . . . .D-22
Starburst Muntin Bar Keeper - 5 Position . . . . . . . . . . . . . . . . . . .D-23
Elliptical Hub . . . . . . . . . . . . . . . . . . . . . . . . . . .D-24
D 1
D 2
Muntin BarAluminum: Painted, Mill Finish, Clear & Color InTM Anodized
Note: Available in pre-cut lengths and pre-notched; tutone and post-painted. Custom colors also available.
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Part numbers shown are standard white color.† Available in tutone. Please see Color Selection Chart located in front of catalog.∆ Part number shown is Dark Bronze Anodized Color.* Part number shown is Clear Anodized. **Part number shown is white welded.
A
B
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)
SPECIAL NOTICECleaning and Handling of Muntin Bar
We recommend muntin bar to be wiped clean before installation into an insulating glass unit. A household grade liquid cleaner may be used for this purpose.To avoid breakdown of painted surfaces, do not use M.E.K., Triethane, Alcohol or like substances for the cleaning of painted muntin bar.When machining and processing muntin bar in yourplant, keep saw tables and work areas free of saw cutfilings to avoid scratching the painted surfaces.
1/8 x .610 219697 200 25333/16 x 9/16† 119320 150 19003/16 x .610† 119705 125 15833/16 x 5/8† 120874 125 15833/16 x 3/4 122909 110 1393
3/16 x 13/16 123618 110 13933/16 x 1 123823 85 1076
1/4 x 9/16 119427 135 17101/4 x 5/8† 121410 120 15201/4 x 3/4 123063 95 1203
1/4 x 13/16 215017 95 12031/4 x 1 123836 70 887
1/4 x 1 1/4 123856 51 6465/16 x 1 210318 60 684
3/8 x 5/8 121468 90 11403/8 x 3/4 123088 75 950
3/8 x 13/16 215016 70 8873/8 x 7/8 123797 55 697
3/8 x 1 201968 55 6963/8(.375) x 3/8 205591 140 1773
7/16 x 3/8 119016 115 14577/16 x 3/8 216500** 115 14577/16 x 1/2 213045 88 11157/16 x 5/8 ∆ 214621 65 8231/2 x 3/4* 201043 50 633
1/2 x 1 203710 40 506
Packaging Information
Muntin Bar Size Part #Pieces Per
Shipping Carton12' 8" Lengths
Lineal Feet PerShipping Carton
12' 8" Lengths
Specification In Inches
Muntin Bar Size A B
1/8 x .610 .125 .6103/16 x 9/16† .187 .5513/16 x .610† .187 .6103/16 x 5/8† .187 .6303/16 x 3/4† .187 .775
3/16 x 13/16† .187 .8013/16 x 1 .187 1.000
1/4 x 9/16 .235 .5621/4 x 5/8 † .235 .6251/4 x 3/4 .235 .765
1/4 x 13/16 .235 .8011/4 x 1 .235 1.000
1/4 x 1 1/4 .235 1.2505/16 x 1 .312 1.000
3/8 x 5/8 † .325 .6253/8 x 3/4 .325 .750
3/8 x 13/16 .325 .8013/8 x 7/8 .325 .875
3/8 x 1 .325 1.0003/8(.375) x 3/8 .375 .375
7/16 x 3/8 .438 .3757/16 x 3/8 .438 .3757/16 x 1/2 .438 .5007/16 x 5/8 ∆ .438 .6251/2 x 3/4* .500 .750
1/2 x 1 .500 1.000Material thickness: .0185
D 3Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Powder-Coated Muntin BarPowder Coated Aluminum
A
B
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)
SPECIAL NOTICECleaning and Handling of Muntin Bar
We recommend muntin bar to be wiped clean before installation into an insulating glass unit. A household grade liquid cleaner may be used for this purpose.To avoid breakdown of painted surfaces, do not use M.E.K., Triethane, Alcohol or like substances for the cleaning of painted muntin bar.When machining and processing muntin bar in yourplant, keep saw tables and work areas free of saw cutfilings to avoid scratching the painted surfaces.
3/16 x 9/16 221711 150 19003/16 x .610 221694 125 15833/16 x 5/8 221678 125 15833/16 x 3/4 221710 110 1393
3/16 x 13/16 221709 110 13931/4 x 5/8 221693 120 1520
Packaging Information
Muntin Bar Size Part #Pieces Per
Shipping Carton12' 8" Lengths
Lineal Feet PerShipping Carton
12' 8" Lengths
Specification In Inches
Muntin Bar Size A B
3/16 x 9/16 .187 .5513/16 x .610 .187 .6103/16 x 5/8 .187 .6303/16 x 3/4 .187 .775
3/16 x 13/16 .187 .8011/4 x 5/8 .235 .625
Note: Available in the following colors: White-R, White 96, Bright White, Porsche White, Tan, Terratone A, Sandtone A, Champagne, Bronze and Dark Brown.
Part numbers shown are standard White-R color. Material thickness: .016
D 4 Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Exterior Muntin BarAluminum: Painted
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)
Part numbers shown are standard white color.Available in all standard muntin bar colors.Please see Color Selection Chart available in front of catalog.Available in pre-cut lengths.
.750
.100
Specification in Inches
Muntin Bar Size A B
3/4 .100 .750
Packaging Information
Muntin Bar Size Part #Pieces Per
Shipping Carton 96" Lengths
Lineal Feet PerShipping Carton
96" Lengths3/4 124446 300 2400
D 5Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Finned Muntin Bar Keeper - Solid ProngNylon
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)
1/8 x .610 302724 5000 302706 50003/16 x .375*† 302582 5000 TBA 50003/16 x 1/2* 302246 5000 TBA 50003/16 x 9/16 134952 3500 134942 35003/16 x 5/8 135147 3000 135138 30003/16 x 3/4 136867 2500 136862 2500
3/16 x 13/16 137143 2400 137132 24003/16 x 7/8* 302275 2200 TBA 2200
3/16 x 1* 300762 2000 302319 20001/4 x 5/16∆ 302084 7500 302758 75001/4 x .375†* 302583 TBA TBA TBA1/4 x 1/2* 302247 4000 302681 40001/4 x 9/16 135079 3000 135080 30001/4 x 5/8 136005 2500 135992 25001/4 x 3/4 137078 2000 137070 2000
1/4 x 13/16 302236 2000 302678 20001/4 x 7/8* TBA 1800 TBA 1800
1/4 x 1* 301860 1800 302680 18001/4 x 1 1/4* 302567 1000 302504 10005/16 x 1/2* 302248 3000 302682 3000.325 x .375*† 302398 4000 TBA TBA.375 x .375*† 302584 TBA TBA TBA3/8 x 1/2* 302260 2500 302699 2500 3/8 x 5/8 136060 2000 136046 20003/8 x 3/4 137098 1500 137095 1500
3/8 x 13/16 302235 1800 302679 18003/8 x 7/8* 300044 1400 138279 1400.375 x 7/8* 301513 1400 TBA 1400
3/8 x 1* 301507 1200 301434 12007/16 x 3/8*†§ 138261 3500 138264† 35007/16 x 1/2* 302259 2000 302700 20007/16 x 7/8* 302464 1200 TBA 1200
7/16 x 1* TBA 1000 TBA 10001/2 x 1/2* 302261 1800 TBA TBA1/2 x3/4 301459 1000 301847 1000
1/2 x 7/8* TBA 1000 TBA 10001/2 x 1* TBA 800 TBA 800
Packaging Information
Muntin Bar Size 1 ProngPart # Pieces
2 ProngPart # Pieces
1/8 x .610 .090 .5723/16 x .375† .155 .3503/16 x 1/2 .155 .4763/16 x 9/16 .134 .5253/16 x 5/8 .134 .5983/16 x 3/4 .134 .754
3/16 x 13/16 .134 .7813/16 x 7/8 .134 .846
3/16 x 1 .134 .9701/4 x 5/16∆ .195 .2861/4 x .375† .202 .3501/4 x 1/2 .188 .4761/4 x 9/16 .188 .5301/4 x 5/8 .188 .5931/4 x 3/4 .188 .733
1/4 x 13/16 .188 .7701/4 x 7/8 .188 .846
1/4 x 1 .188 .9701/4 x 1 1/4 .215 1.2305/16 x 1/2 .277 .476.325 x .375 .292 .350.375 x .375† .340 .3503/8 x 1/2 .340 .4763/8 x 5/8 .270 .5933/8 x 3/4 .270 .722
3/8 x 13/16 .270 .7703/8 x 7/8 .270 .846.375 x 7/8 .333 .846
3/8 x 1 .270 .9707/16 x 3/8*§ .375 .3457/16 x 1/2 .402 .4767/16 x 7/8 .396 .846
7/16 x 1 .388 .9701/2 x 1/2* .465 .4761/2 x3/4 .460 .712
1/2 x 7/8* .458 .8461/2 x 1* .450 .970
Specification In Inches
Muntin Bar Size A B
Part numbers shown are standard natural nylon with a .500 prong distance.* Not available with a .415 prong distance. † 2 Prong distance = .275 § Prong distance = .300∆ Also fits Slimline Muntin Bar (.230 x 5/16")
D 5Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Finned Muntin Bar Keeper - Solid ProngNylon
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)
1/8 x .610 302724 5000 302706 50003/16 x .375*† 302582 5000 TBA 50003/16 x 1/2* 302246 5000 TBA 50003/16 x 9/16 134952 3500 134942 35003/16 x 5/8 135147 3000 135138 30003/16 x 3/4 136867 2500 136862 2500
3/16 x 13/16 137143 2400 137132 24003/16 x 7/8* 302275 2200 TBA 2200
3/16 x 1* 300762 2000 302319 20001/4 x 5/16∆ 302084 7500 302758 75001/4 x .375†* 302583 TBA TBA TBA1/4 x 1/2* 302247 4000 302681 40001/4 x 9/16 135079 3000 135080 30001/4 x 5/8 136005 2500 135992 25001/4 x 3/4 137078 2000 137070 2000
1/4 x 13/16 302236 2000 302678 20001/4 x 7/8* TBA 1800 TBA 1800
1/4 x 1* 301860 1800 302680 18001/4 x 1 1/4* 302567 1000 302504 10005/16 x 1/2* 302248 3000 302682 3000.325 x .375*† 302398 4000 TBA TBA.375 x .375*† 302584 TBA TBA TBA3/8 x 1/2* 302260 2500 302699 2500 3/8 x 5/8 136060 2000 136046 20003/8 x 3/4 137098 1500 137095 1500
3/8 x 13/16 302235 1800 302679 18003/8 x 7/8* 300044 1400 138279 1400.375 x 7/8* 301513 1400 TBA 1400
3/8 x 1* 301507 1200 301434 12007/16 x 3/8*†§ 138261 3500 138264§ 35007/16 x 1/2* 302259 2000 302700 20007/16 x 7/8* 302464 1200 TBA 1200
7/16 x 1* TBA 1000 TBA 10001/2 x 1/2* 302261 1800 TBA TBA1/2 x3/4 301459 1000 301847 1000
1/2 x 7/8* TBA 1000 TBA 10001/2 x 1* 302867 800 TBA 800
Packaging Information
Muntin Bar Size 1 ProngPart # Pieces
2 ProngPart # Pieces
1/8 x .610 .090 .5723/16 x .375† .155 .3503/16 x 1/2 .155 .4763/16 x 9/16 .134 .5253/16 x 5/8 .134 .5983/16 x 3/4 .134 .754
3/16 x 13/16 .134 .7813/16 x 7/8 .134 .846
3/16 x 1 .134 .9701/4 x 5/16∆ .195 .2861/4 x .375† .202 .3501/4 x 1/2 .188 .4761/4 x 9/16 .188 .5301/4 x 5/8 .188 .5931/4 x 3/4 .188 .733
1/4 x 13/16 .188 .7701/4 x 7/8 .188 .846
1/4 x 1 .188 .9701/4 x 1 1/4 .215 1.2305/16 x 1/2 .277 .476.325 x .375 .292 .350.375 x .375† .340 .3503/8 x 1/2 .340 .4763/8 x 5/8 .270 .5933/8 x 3/4 .270 .722
3/8 x 13/16 .270 .7703/8 x 7/8 .270 .846.375 x 7/8 .333 .846
3/8 x 1 .270 .9707/16 x 3/8*§ .375 .3457/16 x 1/2 .402 .4767/16 x 7/8 .396 .846
7/16 x 1 .388 .9701/2 x 1/2* .465 .4761/2 x3/4 .460 .712
1/2 x 7/8* .458 .8461/2 x 1* .450 .970
Specification In Inches
Muntin Bar Size A B
Part numbers shown are standard natural nylon with a .500 prong distance.* Not available with a .415 prong distance. † 2 Prong distance = .275 § Prong distance = .300∆ Also fits Slimline Muntin Bar (.230 x 5/16")
D 6 Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)
Part numbers shown are standard natural nylon with a .500 prong distance.* Not available with a .415 prong distance. ∆ Also fits Slimline Muntin Bar (.230 x 5/16"). † 2 Prong distance = .275
1/8 x .610 NA NA TBA 50003/16 X .375†* TBA 5000 302591 50003/16 x 1/2* 302451 5000 300475 50003/16 x 9/16 134949 3500 134944 35003/16 x 5/8 135175 3000 135141 30003/16 x 3/4 136865 2500 136863 2500
3/16 x 13/16 137221 2400 137133 24003/16 x 7/8 TBA 2200 302368 2200
3/16 x 1 300214 2000 138286 20001/4 x 5/16∆ 301858 7500 302831 75001/4 x .375† 302747 4000 302594 40001/4 x 1/2* TBA 4000 302432 40001/4 x 9/16 TBA 3000 TBA 30001/4 x 5/8 135995 2500 135993 25001/4 x 3/4 137068 2000 137069 2000
1/4 x 13/16 TBA 2000 301734 20001/4 x 7/8 302565 1800 301974 1800
1/4 x 1 300321 1800 138301 18001/4 x 1 1/4 300916 1000 300186 10005/16 x 1/2* 301876 3000 300476 3000.325 x .375†* 301772 4000 302596 4000.375 x .375†* 302748 4000 302599 TBA3/8 x 1/2* TBA 2500 302690 25003/8 x 5/8 136051 2000 136045 2000
.375 x 5/8* NA 2000 302465 20003/8 x 3/4 137093 1500 137092 1500
3/8 x 13/16 TBA 1800 301735 18003/8 x 7/8* 300424 1400 138277 1400.375 x 7/8 TBA 1400 301036 1400
3/8 x 1 138305 1200 138306 12007/16 x 3/8† NA NA 302602 35007/16 x 1/2* TBA 2000 300486 20007/16 x 5/8* 300071 1500 136119 15007/16 x 7/8 TBA 1200 301034 1200
7/16 x 1 300069 1000 301028 10001/2 x 1/2* TBA TBA TBA TBA1/2 x 3/4 TBA 1000 137118 10001/2 x 7/8 302403 1000 301035 1000
1/2 x 1 302573 800 138314 8005/8 x 5/8* 301495 1000 136122 1000
Packaging Information
Muntin Bar Size 1 ProngPart # Pieces
2 ProngPart # Pieces
1/8 x .610 .090 .5723/16 X .375† .155 .3503/16 x 1/2* .155 .4763/16 x 9/16 .134 .5253/16 x 5/8 .134 .5983/16 x 3/4 .134 .754
3/16 x 13/16 .134 .7813/16 x 7/8 .134 .846
3/16 x 1 .134 .9701/4 x 5/16∆ .195 .2861/4 x .375† .202 .3501/4 x 1/2* .188 .4761/4 x 9/16 .188 .5301/4 x 5/8 .188 .5931/4 x 3/4 .188 .743
1/4 x 13/16 .188 .7701/4 x 7/8 .188 .846
1/4 x 1 .188 .9701/4 x 1 1/4 .215 1.2305/16 x 1/2* .277 .476.325 x .375 .292 .350.375 x .375† .340 .3503/8 x 1/2* .340 .4763/8 x 5/8* .270 .593.375 x 5/8* .340 .5983/8 x 3/4 .270 .722
3/8 x 13/16 .270 .7703/8 x 7/8* .270 .846.375 x 7/8 .333 .846
3/8 x 1 .270 .9707/16 x .3/8† .375 .3457/16 x 1/2* .402 .4767/16 x 5/8 .394 .5987/16 x 7/8 .396 .846
7/16 x 1 .388 .9701/2 x 1/2* .465 .4761/2 x 3/4 .460 .71212 x 7/8 .458 .8461/2 x 1 .450 .970
5/8 x 5/8* .594 .598
Specification In Inches
Muntin Bar Size A B
B
.180
.500 or .415
BA
.086
Finned Muntin Bar Keeper - Barbed ProngNylon
D 7Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)
Solid Muntin Bar KeeperNylon
Part numbers shown are standard natural nylon with a .500 prong distance.* Not available with a .415 prong distance.
A
.086 .500 or .415 B
3/16 x 9/16* 134938 5000 134937 50003/16 x 5/8 135099 5000 135098 50003/16 x 3/4* 136852 5000 136851 5000
3/16 x 13/16* 137129 4000 137130 40003/8 x 5/8 135127 2500 135126 2500
Packaging Information
Muntin Bar Size 1 ProngPart # Pieces
2 ProngPart # Pieces
3/16 x 9/16* .144 .5803/16 x 5/8 .144 .6503/16 x 3/4* .144 .808
3/16 x 13/16* .144 .8353/8 x 5/8 .283 .645
Specification In Inches
Muntin Bar Size A B
D 8 Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Finned Muntin Bar Keeper w/ PadNylon
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)
B
A
Part numbers shown are natural nylon.
7/32 5.5 135135 3000 NA NA NA NA NA NA NA NA1/4 135137 3000 302299 2500 NA NA NA NA NA NA9/32 7 TBA 2800 TBA 2400 NA NA NA NA NA NA5/16 8 135144 2800 301231 2200 NA NA NA NA NA NA11/32 TBA 2800 TBA 2000 NA NA NA NA NA NA23/64 9 300286 2800 TBA 2000 NA NA NA NA NA NA3/8 9.5 135170 2800 302448 2000 301501 2000 NA NA NA NA
13/32 135136 2600 TBA 2000 TBA TBA NA NA NA NA7/16 11 135145 2600 301475 2000 301887 1600 NA NA NA NA15/32 12 302501 2400 300119 2000 TBA TBA NA NA NA NA.475 NA NA NA NA NA NA 300450 1200 NA NA1/2 135146 2000 300129 2000 301520 1200 NA NA NA NA.503 NA NA NA NA NA NA NA NA TBA 3500
17/32 13.5 301388 2000 300120 2000 TBA 1200 NA NA NA NA9/16 14.5 135171 2000 300121 2000 300644 1200 NA NA NA NA19/32 15 300397 2000 TBA 2000 TBA 1200 NA NA NA NA.605 NA NA NA NA NA NA NA NA 301630 3500 5/8 16 135183 2000 300868 2000 301521 1200 NA NA NA NA
21/32 TBA TBA 300894 1800 TBA TBA NA NA NA NA11/16 17.5 135209 1800 301279 1600 301394 1100 NA NA 300593 340023/32 18.5 TBA TBA 301232 1600 TBA TBA NA NA NA NA.725 NA NA NA NA NA NA 301051 1000 NA NA3/4 19 135191 1600 301476 1600 301498 1000 NA NA NA NA
13/16 20.5 TBA 1600 TBA 1500 TBA TBA NA NA 300594 3000
Muntin Bar Pad Size Packaging Information
Fractional Millimeter 3/16 X 5/8Part # Pieces
1/4 X 5/8Part # Pieces
3/8 X 5/8Part # Pieces
3/8 X 7/8Part # Pieces
7/16 X 3/8Part # Pieces
D 9Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Finned Muntin Bar Keeper w/ PadNylon
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)
B
A
* 3/8 x 7/8: B=.866†7/16 x 3/8: B=.370
7/32 5.5 .218 .620 NA NA NA NA NA NA NA NA1/4 .250 .620 .250 .620 NA NA NA NA NA NA9/32 7 .281 .620 .281 .620 NA NA NA NA NA NA5/16 8 .312 .620 .312 .620 NA NA NA NA NA NA11/32 344 .620 .344 .620 NA NA NA NA NA NA23/64 9 .359 .620 .359 .620 NA NA NA NA NA NA3/8 9.5 .375 .620 .375 .620 .375 .620 NA NA NA NA
13/32 .406 .620 .406 .620 .406 .620 NA NA NA NA7/16 11 .437 .620 .437 .620 .437 .620 NA NA NA NA15/32 12 .470 .620 .470 .620 .470 .620 NA NA NA NA.475 NA NA NA NA NA NA .475 .866 NA NA1/2 .500 .620 .500 .620 .500 .620 NA NA NA NA.503 NA .NA NA NA NA NA NA NA .503 .370
17/32 13.5 .531 .620 .531 .620 .531 .620 NA NA NA NA9/16 14.5 .562 .620 .562 .620 .562 .620 NA NA NA NA19/32 15 .594 .620 .594 .620 .594 .620 NA NA NA NA.605 NA NA NA NA NA NA NA NA .605 .3705/8 16 .625 .620 .625 .620 .625 .620 NA NA NA NA
21/32 .646 .620 .646 .620 .646 .620 NA NA NA NA11/16 17.5 .688 .620 .688 .620 .688 .620 NA NA .688 .37023/32 18.5 .708 .620 .708 .620 .708 .620 NA NA NA NA.725 NA NA NA NA NA NA .725 .866 NA NA3/4 19 .750 .620 .750 .620 .750 .620 NA NA NA NA
13/16 20.5 .812 .620 .812 .620 .812 .620 NA NA .812 .370
Muntin Bar Pad Size Specification In Inches
Fractional Millimeter 3/16 X 5/8A B
1/4 X 5/8A B
3/8 X 5/8A B
3/8 X 7/8*A B
7/16 X 3/8†A B
D 10 Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Muntin Bar LocatorNylon
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)
.187
AB
.500 or .415 .080
3/16 x 9/16* 300065 3500 TBA 35003/16 x 5/8 136307 3500 136305 35003/16 x 3/4 138826 2500 138829 2500
3/16 x 13/16 138826 2500 138829 25003/8 x 5/8 302435 2000 136360 20003/8 x 3/4* 138835 1500 138836 1500
Packaging Information
Muntin Bar Size 1 ProngPart # Pieces
2 ProngPart # Pieces
3/16 x 9/16* .134 .5603/16 x 5/8 .134 .6203/16 x 3/4 .134 .790
3/16 x 13/16 .134 .7903/8 x 5/8 .272 .6203/8 x 3/4* .272 .740
Specification In Inches
Muntin Bar Size A B
Part numbers shown are standard natural nylon with a .500 prong distance.* Not available with a .415 prong distance.
D 11Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Muntin Bar Locator w/ PadNylon
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)
Part numbers shown are standard natural nylon.
B
A
A.140
11/32 136304 20003/8 136309 2000
15.5 136310 200018.5 136312 2000
11/32 .340 .6203/8 .370 .620
15.5 .606 .62018.5 .724 .620
Packaging InformationMuntin Bar Pad Size
Fractional Millimeter3/16 X 5/8
Part # Pieces
Specification In InchesMuntin Bar Pad Size
Fractional Millimeter A B
�
D 12 Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Part numbers shown are standard natural nylon.† Glass-filled nylon only.
A. Fits Sizes 3/16 x 9/16, 3/16 x 5/8, 1/4 x 9/16, 1/4 x 5/8
B. Fits Sizes 3/16 x 3/4, 3/16 x 13/16, 1/4 x 3/4
C. Fits Sizes 3/8 x 5/8, 3/8 x 3/4, .375 x 5/8
D. Fits Sizes 3/16 x 7/8, 3/16 x 1, 1/4 x 7/8, 1/4 x 1E. Fits Sizes 3/8 x 7/8, 3/8 x 1F. Fits Sizes 3/8 x 1/2, .375 x 1/2
G. Fits Sizes 5/16 x 1/2
H. Fits Sizes 7/16 x 1/2
I. Fits Sizes 1/2 x 1/2
J. Fits Sizes 7/16 x 5/8
K. Fits Sizes 5/8 x 5/8
L. Fits Sizes 3/16 x 1/2
M. Fits Sizes 1/2 x 3/4
N. Fits Sizes 1/4 x 5/16
O. Fits Sizes 1/4 x 1 1/4, 1/4 x 1 3/8
P. Fits Sizes 7/16 x 3/8, .375 x .375Q. Fits Sizes 1/4 x 5/8
R. Fits Sizes 1/4 x 1/2
S. Fits Sizes 1/4 x 13/16, 3/8 x 13/16
T. Fits Sizes .325 x .375U. Fits Sizes .125 x .610V. Clip 3/16 x 3/8 (.187 X .375) and 1/4 x 3/8 (.235 X .375)
A 137237 2000 137238 7500B 137663 700 137660 3500C 137842 800 137839 3600D 137889 700 137892 2500E 137900 500 137901 1800F 300515 1800 138872 7000G 138874 2000 300337 6500H 138876 1600 300473 5500I TBA 1400 300511 4500J 138878 1000 138879 3800K 300077 700 300076 2600L 300260 2800 300261 10,000M 300393 500 300392 2000N 302792 5000 NA NAO† 300526 300 300518 1000P 300625 3500 TBA TBAQ 302173 TBA 301730 7500R TBA TBA 301768 9000S 302417 600 301742 3000T 302399 5000 302302 15000U 302837 3000 302252 10000V 302585 5000 TBA TBA
Packaging InformationInternal
Muntin Bar ClipSmall Carton
Part # PiecesLarge Carton
Part # PiecesA .455 .896 .140B .670 1.270 .140C .500 1.044 .228D .820 1.430 .140E .740 1.430 .204F .400 .800 .233G .400 .800 .201H .400 .800 .264I .400 .800 .295J .500 1.034 .264K .500 1.034 .358L .400 .800 .145M .600 1.280 .295N .210 .490 .125O† 1.000 2.120 .152P .280 .560 .240Q .455 .896 .168R .400 .800 .165S .670 1.310 .204T .280 .560 .200U .455 .896 .090V .280 .560 .145
Specification In InchesInternal
Muntin Bar Clip A B C
A
B
C
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)C, ± .005 (.127mm)
Internal Muntin Bar ClipNylon
D 13Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Part numbers shown are standard natural nylon.*Not available with a .415 prong distance.
Finned Muntin Bar Flexible Keeper - Barbed ProngNylon
A
.140
B
.500
B
.500
.140
A
.140
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)
3/16 x 5/8* Long 300433 15003/16 x 5/8* Short 300432 2000
Packaging Information
Muntin Bar Size 2 ProngPart # Pieces
3/16 x 5/8* 1.56 .5983/16 x 5/8* 1.00 .598
Specification In Inches
Muntin Bar Size A B
D 14 Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Adjustable Muntin Bar ConnectorNylon
B
A
Part numbers shown are standard natural nylon.
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)
3/16 x 5/8 137910 600
Packaging Information
Muntin Bar Size Part # Pieces
3/16 x 5/8 .598 2.700
Specification In Inches
Muntin Bar Size A B
D 15Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Variable Angle Internal Muntin Bar ConnectorNylon
3pc connection
B A
B
.375 or .5001.000
A
B
.500 .180
A
B A
Part A
Part B
Fixed Base w/ Pad
Fixed Base w/ Barbed Prong
Part numbers shown are standard natural nylon.
Part numbers shown are standard natural nylon.
Part numbers shown are standard natural nylon.
Part numbers shown are standard natural nylon.
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)
Replaces Part A.
Replaces Part A.
2pc connection Use (1) part A and (1) part B3pc connection Use (1) part A and (2) part B
3/16 x 5/8 300885 15003/16 x 3/4 300197 1000
3/16 x 13/16 300197 1000
Packaging Information
Muntin Bar Size Part # Pieces
3/16 x 5/8 .140 .5503/16 x 3/4 .140 .700
3/16 x 13/16 .140 .700
Specification In Inches
Muntin Bar Size A B
3/16 x 5/8 300886 30003/16 x 3/4 300202 2000
3/16 x 13/16 300202 2000
Packaging Information
Muntin Bar Size Part # Pieces
3/16 x 5/8 .140 .5503/16 x 3/4 .140 .700
3/16 x 13/16 .140 .700
Specification In Inches
Muntin Bar Size A B
3/16 x 5/8 301387 10003/16 x 3/4 301109 1000
3/16 x 13/16 301109 1000
Packaging Information
Muntin Bar Size Part # Pieces
3/16 x 5/8 .140 .5503/16 x 3/4 .140 .700
3/16 x 13/16 .140 .700
Specification In Inches
Muntin Bar Size A B
3/16 x 5/8 .140 .5503/16 x 3/4 .140 .700
3/16 x 13/16 .140 .700
Specification In Inches
Muntin Bar Size A B
3/16 x 5/8 301107 1000 301108 10003/16 x 3/4 301110 1000 301111 1000
3/16 x 13/16 301110 1000 301111 1000
Packaging Information
Muntin Bar Size 3/8 PadPart # Pieces
1/2 PadPart # Pieces
D 16 Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Multi-Position Starburst (MPS) HubPolyester
Part numbers shown are standard white color.† Please note: 2 pieces required to make one hub unit 100 piece count carton makes 50 hubs.Produced from pre-colored UV Stable polyester and is available in all standard muntin bar colors.Please see Color Selection Chart available in front of catalog.
Part numbers shown are standard white color. † Please note: 2 pieces required to make one hub unit 100 piece count carton makes 50 hubs.Produced from pre-colored UV Stable polyester and is available in all standard muntin bar colors.Please see Color Selection Chart available in front of catalog.
W/ Pad Slot
W/ Solid Prong
AFront View
1.500
0˚ 18˚ 30˚
60˚
45˚54˚
69˚ (4" only)75˚ (5" only)
C
B
Side View View of Locator Ports
Please Specify: MPS Hub with Solid Prong or Pad.
5.5mm x 4" MPS Hub accommodates: Contour Muntin Bar 5.5 x 18Flat Muntin Bar 3/16" (.187) and 1/4" (.235)
8mm x 5" MPS Hub accommodates:Contour Muntin Bar 5.5 x 18, 8 x 18 and 8 x 25 Flat Muntin Bar 3/16" (.187), 1/4" (.235 or .250) and 3/8" (.325)
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)C, ± .005 (.127mm)
5.5mm x 4" 300537 100 300110 3008mm x 5" 301512 40 139006 150
Packaging Information
Muntin Bar Size Small CartonPart # Pieces†
Large CartonPart # Pieces†
5.5mm x 4" 4.0 2.0 .3358mm x 5" 5.0 2.5 .450
Specification In Inches
Muntin Bar Size A B C
5.5mm x 4" 4.0 2.0 .3358mm x 5" 5.0 2.5 .450
Specification In Inches
Muntin Bar Size A B C
5.5mm x 4" 302244 100 300015 3008mm x 5" 302330 40 300797 150
Packaging Information
Muntin Bar Size Small CartonPart # Pieces†
Large CartonPart # Pieces†
D 17Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Quarter Round MPS HubPolyester
A
Front Viewwith Solid Prong
A
Front Viewwith Pad Slot
C
B
Side View
Part numbers shown are standard white color.† Please note: 2 pieces required to make one hub unit 100 piece count carton makes 50 hubs.Produced from pre-colored UV Stable polyester and is available in all standard muntin bar colors.Please see Color Selection Chart available in front of catalog.
Part numbers shown are standard white color.† Please note: 2 pieces required to make one hub unit 100 piece count carton makes 50 hubs.Produced from pre-colored UV Stable polyester and is available in all standard muntin bar colors.Please see Color Selection Chart available in front of catalog.
W/ Pad Slot
W/ Solid Prong
Please Specify: Quarter Round MPS Hub with Solid Prong or Pad.
5.5mm x 4" Quarter Round MPS Hub accommodates: Contour Muntin Bar 5.5 x 18Flat Muntin Bar 3/16" (.187) and 1/4" (.235)
8mm x 5" Quarter Round MPS Hub accommodates:Contour Muntin Bar 5.5 x 18, 8 x 18 and 8 x 25 Flat Muntin Bar 3/16" (.187), 1/4" (.235 or .250) and 3/8" (.325)
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)C, ± .005 (.127mm)
5.5mm x 4" 300895 200 TBA 8008mm x 5" 301209 100 TBA 400
Packaging Information
Muntin Bar Size Small CartonPart # Pieces†
Large CartonPart # Pieces†
5.5mm x 4" 2.0 2.0 .3358mm x 5" 2.5 2.5 .450
Specification In Inches
Muntin Bar Size A B C
5.5mm x 4" 300085 200 300084 8008mm x 5" 301210 100 TBA 400
Packaging Information
Muntin Bar Size Small CartonPart # Pieces†
Large CartonPart # Pieces†
5.5mm x 4" 2.0 2.0 .3358mm x 5" 2.5 2.5 .450
Specification In Inches
Muntin Bar Size A B C
D 18 Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Finned MPS Muntin Bar KeeperNylon
AB
.500TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)
3/16 x 9/16 300701 10003/16 x 5/8 300590 10003/16 x 3/4 300454 1000
3/16 x 13/16 300755 10003/16 x 1 302661 1000
1/4 x 9/16 TBA 10001/4 x 5/8 300507 10001/4 x 3/4 TBA 1000
1/4 x 13/16 TBA 10001/4 x 1 302581 1000
5/16 x 1/2 302726 1000.325 x .375 301773 10003/8 x 5/8 TBA 10003/8 x 3/4 301466 1000
3/8 x 13/16 TBA 10003/8 x 7/8 TBA 1000
3/8 x 1 TBA 1000
Packaging Information
Muntin Bar Size Part # Pieces
3/16 x 9/16 .134 .5253/16 x 5/8 .134 .5983/16 x 3/4 .134 .754
3/16 x 13/16 .134 .7813/16 x 1 .134 .970
1/4 x 9/16 .188 .5301/4 x 5/8 .188 .5931/4 x 3/4 .188 .733
1/4 x 13/16 .188 .7701/4 x 1 .188 .970
5/16 x 1/2 .277 .476.325 x .375 .270 .3453/8 x 5/8 .270 .5933/8 x 3/4 .270 .722
3/8 x 13/16 .270 .7703/8 x 7/8 .270 .846
3/8 x 1 .270 .970
Specification In Inches
Muntin Bar Size A B
3/16 & 1/4 Finned MPS Hub Keepers will fit 5.5mm x 4" & 8mm x 5" MPS Hub.
3/8" Finned MPS Hub Keepers will fit 8mm x 5" MPS Hub or 8mm x 5" MPS Quarter Round.
Part numbers shown are standard natural nylon.
D 19Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
MPS Hub PadNylon
A
B
Part numbers shown are standard black color.
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)
Specification In Inches
Pad SizeFractional Millimeter A B
Packaging Information
Pad SizeFractional Millimeter
Part # Pieces
.420 300039 10007/16 11 TBA 1000
15/32 12 TBA 1000.480 300040 10001/2 301636 1000
17/32 13.5 TBA 10009/16 14.5 TBA 10005/8 16 TBA 1000
.420 .420 .6207/16 11 .437 .620
15/32 12 .468 .620.480 .480 .6201/2 .500 .620
17/32 13.5 .531 .6209/16 14.5 .562 .6205/8 16 .615 .620
D 20 Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Finned Muntin Bar Keeper w/ Stabilizer PadNylon
B
A
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)
Part numbers shown are standard black color.
3/16 301426 2500 NA NA NA NA NA NA NA NA NA NA1/4 TBA TBA NA NA 300911 2000 300910 2000 NA NA NA NA5/16 NA NA NA NA TBA TBA 301201 2000 NA NA NA NA11/32 NA NA TBA TBA NA NA NA NA TBA 2000 NA NA3/8 302783 2500 TBA 2500 301813 2000 301311 1800 TBA 2000 TBA TBA
13/32 NA NA TBA TBA NA NA NA NA TBA 2000 TBA TBA7/16 NA NA TBA TBA TBA TBA 301312 1600 TBA 2000 TBA TBA15/32 NA NA TBA TBA NA NA NA NA TBA 2000 TBA TBA1/2 TBA 2000 TBA TBA 301814 1800 301207 1500 TBA 2000 TBA TBA
17/32 NA NA TBA TBA NA NA NA NA TBA 2000 TBA TBA9/16 NA NA TBA TBA 301989 1600 301873 1400 TBA 2000 TBA 12005/8 NA NA TBA 2000 TBA TBA 301202 1400 TBA 2000 TBA 12003/4 NA NA NA NA 301019 1200 301020 1200 NA NA NA NA
Packaging InformationPadSize
3/16 x 9/16Part # Pieces
3/16 x 5/8Part # Pieces
3/16 x 3/4Part # Pieces
3/16 x 13/16Part # Pieces
1/4 x 5/8Part # Pieces
3/8 x 5/8Part # Pieces
D 21Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
B
A
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)
3/16 .177 .552 NA NA NA NA NA NA NA NA NA NA1/4 .240 .552 NA NA .240 .782 .240 .782 NA NA NA NA5/16 NA NA NA NA .303 .782 .303 .782 NA NA NA NA11/32 NA NA .334 .620 NA NA NA NA .334 .620 NA NA3/8 .365 .552 .365 .620 .365 .782 .365 .782 .365 .620 .365 .620
13/32 NA NA .396 .620 NA NA NA NA .396 .620 .396 .6207/16 NA NA .427 .620 .427 .782 .427 .782 .427 .620 .427 .62015/32 NA NA .458 .620 NA NA NA NA .458 .620 .458 .6201/2 .490 .552 .490 .620 .490 .782 .490 .782 .490 .620 .490 .620
17/32 NA NA .521 .620 NA NA NA NA .521 .620 .521 .6209/16 NA NA .552 .620 .552 .782 .552 .782 .552 .620 .552 .6205/8 NA NA .615 .620 .615 .782 .615 .782 .615 .620 .615 .6203/4 NA NA NA NA .740 .782 .740 .782 NA NA NA NA
Specification In InchesPadSize
3/16 x 9/16A B
3/16 x 5/8A B
3/16 x 3/4A B
3/16 x 13/16A B
1/4 x 5/8A B
3/8 x 5/8A B
Finned Muntin Bar Keeper w/ Stabilizer PadNylon
D 22 Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Starburst Muntin Bar Keeper - 3 positionPolyester
B B
.500 or .415A
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)
B B
.500 or .415A
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)
Solid Prong
Barbed Prong
Part numbers shown are standard white color with a .500 prong distance.Produced from pre-colored UV Stable polyester and is available in all standard muntin bar colors.Please see Color Selection Chart available in front of catalog.
Part numbers shown are standard white color with a .500 prong distance.Produced from pre-colored UV Stable polyester and is available in all standard muntin bar colors.Please see Color Selection Chart available in front of catalog.
3/16 x 9/16 .500 .5253/16 x 5/8 .500 .598
Specification In Inches
Muntin Bar Size A B
3/16 x 9/16 300915 500 300001 5003/16 x 5/8 136383 500 136371 500
Packaging Information
Muntin Bar Size 1 ProngPart # Pieces
2 ProngPart # Pieces
3/16 x 9/16 .500 .5253/16 x 5/8 .500 .598
Specification In Inches
Muntin Bar Size A B
3/16 x 9/16 302734 500 301733 5003/16 x 5/8 136384 500 136372 500
Packaging Information
Muntin Bar Size 1 ProngPart # Pieces
2 ProngPart # Pieces
D 23Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Starburst Muntin Bar Keeper - 5 positionPolyester
B
.500 or .415 or 1.500
A
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)
Solid Prong
Barbed Prong
Part numbers shown are standard white color with a .500 prong distance.Produced from pre-colored UV Stable polyester and is available in all standard muntin bar colors.Please see Color Selection Chart available in front of catalog.
Part numbers shown are standard white color with a .500 prong distance.Produced from pre-colored UV Stable polyester and is available in all standard muntin bar colors.Please see Color Selection Chart available in front of catalog.
3/16 x 5/8 .500 .598
3/16 x 5/8 .500 .598
Specification In Inches
Muntin Bar Size A B
3/16 x 5/8 136664 200 136661 700 136653 200 136658 700
Packaging Information
Muntin Bar Size 1 Prong Small CartonPart # Pieces
1 Prong Large CartonPart # Pieces
2 Prong Small CartonPart # Pieces
2 Prong Large CartonPart # Pieces
3/16 x 5/8 136649 200 136650 700 136676 200 136654 700
B B
A
.500 or .415 or 1.500
Packaging Information
Muntin Bar Size 1 Prong Small CartonPart # Pieces
1 Prong Large CartonPart # Pieces
2 Prong Small CartonPart # Pieces
2 Prong Large CartonPart # Pieces
Specification In Inches
Muntin Bar Size A B
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)
B
D 24 Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Elliptical HubPolyester
TBA TBA 302320 120
Packaging InformationSmall Carton
Part # PiecesLarge Carton
Part # Pieces
Part numbers shown are standard white color.
C O N T O U R M U N T I N B A R
Contour Muntin Bar . . . . . . . . . . . . . . . . . . . . . . .E-2
Contour Powder-Coated Muntin Bar . . . . . . . . .E-3
Contour Keeper . . . . . . . . . . . . . . . . . . . . . . . . . . .E-4
Contour Keeper w/ Pad . . . . . . . . . . . . . . . . . . . .E-5
Contour Keeper w/ Stabilizer Pad . . . . . . . . . . .E-6
Contour Saddle Clip . . . . . . . . . . . . . . . . . . . . . . .E-7
Contour Internal Intersect . . . . . . . . . . . . . . . . . .E-8
Contour External Intersect . . . . . . . . . . . . . . . . . .E-9
Contour External Intersect w/Glass Buffer Hole and Glass Buffer . . . . . . . . . . . . . . .E-10
Contour External T-Shape Intersect . . . . . . . . .E-11
Contour External 90° Intersect . . . . . . . . . . . . .E-12
Contour Cap-Over Intersect and External Contour Cap-Over . . . . . . . . . . . . . . . .E-13
Cap-Over w/Glass Buffer Holeand Glass Buffer . . . . . . . . . . . . . . . . . . . . . . . . .E-14
90° Cap-Over Intersect and 90° Cap-Over . . .E-15
T-Shape Cap-Over Intersect and T-Shape Cap-Over . . . . . . . . . . . . . . . . . . . .E-16
Contour Notch Cap-Over . . . . . . . . . . . . . . . . . .E-17
Contour Internal Straight Connector . . . . . . . .E-18
Contour 90° Internal Intersect . . . . . . . . . . . . . .E-19
Contour Internal Flexible Intersect . . . . . . . . . .E-20
Contour Internal Straight Intersect . . . . . . . . . .E-21
Contour Internal Intersect Keeper . . . . . . . . . .E-22
Contour Internal Variable Angle Connector . . . . . . . . . . . . . . . . . . . . . . . . .E-23
Multi-Position Starburst (MPS) Hub . . . . . . . .E-24
Quarter Round MPS Hub . . . . . . . . . . . . . . . . .E-25
Contour MPS Hub Keeper . . . . . . . . . . . . . . . . .E-26
MPS Hub Pad . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-27
Contour Internal Starburst - 3 position . . . . . .E-28
Contour Internal Starburst - 5 position . . . . . .E-29
Contour External Starburst - 3 position . . . . . .E-30
Contour External Starburst - 5 position . . . . . .E-31
Elliptical Hub . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-32E 1
E 2
Contour Muntin BarAluminum: Painted, Mill Finish, Clear & Color InTM Anodized
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Part numbers shown are standard white color.Available in solid & tutone colors. Please see Color Selection Chart located in front of catalog.
Material Thickness: .016: 5.5 x 18mm and 8 x 18mm..0185: 8 x 25mm.
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)
5.5 x 18 124040 170 21538 x 18 123911 120 15208 x 25 124307 84 1064
5.5 x 18 .217 .7098 x 18 .315 .7098 x 25 .315 .984
Packaging InformationMuntin Bar Size
MillimeterPart #
Pieces PerShipping Carton
12' 8" Lengths
Lineal Feet PerShipping Carton
12' 8" Lengths
Specification In InchesMuntin Bar Size
Millimeter A B
A
B
Note: Available in pre-cut lengths and pre-notched; tutone and post-painted. Custom colors also available.Painted seam available in limited colors upon request.
SPECIAL NOTICECleaning and Handling of Muntin Bar
We recommend muntin bar to be wiped clean before installation into an insulating glass unit. A household grade liquid cleaner may be used for this purpose.To avoid breakdown of painted surfaces, do not use M.E.K., Triethane, Alcohol or like substances for the cleaning of painted muntin bar.When machining and processing muntin bar in yourplant, keep saw tables and work areas free of saw cutfilings to avoid scratching the painted surfaces.
5.5 x 18 221692 170 21538 x 18 221679 120 15208 x 25 221691 84 1064
Packaging Information
Muntin Bar Size Part #Pieces Per
Shipping Carton12' 8" Lengths
Lineal Feet PerShipping Carton
12' 8" Lengths
Specification In Inches
Muntin Bar Size A B
5.5 x 18 .217 .7098 x 18 .315 .7098 x 25 .315 .984
Note: Available in the following colors: White-R, White 96, Bright White, Porsche White, Tan, Terratone A, Sandtone A, Champagne, Bronze and Dark Brown.
Part numbers shown are standard White-R color. Material thickness: .016: 5.5 x 18mm and 8 x 18mm..0185: 8 x 25mm.
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)
A
B
SPECIAL NOTICECleaning and Handling of Muntin Bar
We recommend muntin bar to be wiped clean before installation into an insulating glass unit. A household grade liquid cleaner may be used for this purpose.To avoid breakdown of painted surfaces, do not use M.E.K., Triethane, Alcohol or like substances for the cleaning of painted muntin bar.When machining and processing muntin bar in yourplant, keep saw tables and work areas free of saw cutfilings to avoid scratching the painted surfaces.
Contour Powder-Coated Muntin BarPowder Coated Aluminum
E 3
E 4 Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Contour KeeperPolyester
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)C, ± .005 (.127mm)
B C
A.500 or .415
B C
A
B C
.500 or .415
B C
Part numbers shown are standard white color with a .500 Prong distance.
Part numbers shown are standard white color with a .500 Prong distance.
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)C, ± .005 (.127mm)
5.5 x 18 .500 .686 .1808 x 18 .500 .686 .2808 x 25 .500 .962 .270
Specification In InchesMuntin Bar Size
Millimeter A B C
5.5 x 18 137953 2000 137947 20008 x 18 138003 1600 137995 16008 x 25 138151 1000 138146 1000
Packaging InformationMuntin Bar Size
Millimeter1 Prong
Part # Pieces2 Prong
Part # Pieces
5.5 x 18 .500 .686 .1808 x 18 .500 .686 .2808 x 25 .500 .962 .270
Specification In InchesMuntin Bar Size
Millimeter A B C
5.5 x 18 137951 2000 137948 20008 x 18 138001 1600 137994 16008 x 25 138149 1000 138147 1000
Packaging InformationMuntin Bar Size
Millimeter1 Prong
Part # Pieces2 Prong
Part # Pieces
Solid Prong
Barbed Prong
E 5Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Contour Keeper w/ PadNylon
B
A
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)
Part numbers shown are standard natural nylon. *5.5 x 18: B = .686 8 x 18: B = .686 8 x 25: B = .962
1/4 .250 .6869/32 7 .281 .6865/16 8 .312 .68611/32 .344 .68623/64 9 .359 .6863/8 9.5 .375 *
13/32 .406 *.420 .420 .6867/16 11 .437 *15/32 12 .470 *.480 .480 .6861/2 .500 *
17/32 13.5 .531 *9/16 14.5 .562 *19/32 15 .594 *5/8 16 .625 *
21/32 .656 .68611/16 17.5 .687 *23/32 18.5 .718 .6863/4 19 .750 *
13/16 20.5 .812 *
Packaging Information
Muntin Bar Pad SizeFractional Millimeter
5.5 x 18mmPart # Pieces
8 x 18mmPart # Pieces
8 x 25mmPart # Pieces
1/4 300123 2000 NA NA NA NA9/32 7 TBA 1900 NA NA NA NA5/16 8 300157 1800 301419 1600 NA NA11/32 TBA 1800 TBA 1600 NA NA23/64 9 300160 1800 TBA 1600 NA NA3/8 9.5 301184 1800 302674 1600 300661 1000
13/32 TBA 1700 TBA 1500 TBA 900.420 TBA 1600 TBA 1400 NA NA7/16 11 301183 1600 TBA 1400 300660 80015/32 12 TBA 1600 TBA 1400 TBA 800.480 TBA 1600 TBA 1400 NA NA1/2 300592 1500 300356 1200 300659 800
17/32 13.5 300158 1400 300697 1200 TBA 7009/16 14.5 300464 1400 300966 1200 TBA 70019/32 15 TBA 1300 TBA 1100 TBA 7005/8 16 300161 1300 300994 1000 300340 600
21/32 TBA 1300 300698 1000 NA NA11/16 17.5 300838 1200 300699 1000 300341 60023/32 18.5 TBA 1200 TBA 1000 NA NA3/4 19 300159 1200 301954 800 TBA 500
13/16 20.5 300162 1100 300713 800 TBA 500
Specification In InchesMuntin Bar Pad Size
A BFractional Millimeter
E 6 Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Contour Keeper w/ Stabilizer PadNylon
B
A
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)
Part numbers shown are standard black color. *5.5 x 18: B = .175 8 x 18: B = .280
1/2 .490 *5/8 16 .615 *
1/2 TBA 1500 TBA 12005/8 16 TBA 1300 TBA 1000
Packaging Information
Muntin Bar Pad SizeFractional Millimeter
5.5 x 18mmPart # Pieces
8 x 18mmPart # Pieces
Specification In Inches
Muntin Bar Pad SizeA B
Fractional Millimeter
E 7Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Contour Saddle ClipPolyester
A
.086
B
Part numbers shown are standard white.Produced from pre-colored UV Stable polyester and is available in allstandard muntin bar colors. Please see Color Selection Chart available infront of catalog.
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)
5.5 x 18 138324 25008 x 18 138329 20008 x 25 138363 1000
Packaging InformationMuntin Bar Size
Millimeter Part # Pieces
5.5 x 18 .178 .6748 x 18 .280 .6748 x 25 .275 .940
Specification In InchesMuntin Bar Size
Millimeter A B
E 8 Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Contour Internal IntersectPolyester
B A
Part numbers shown are standard white color.
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)
5.5 x 18 138379 200 138380 7008 x 18 138387 150 138386 5008 x 25 302530 75 138838 250
Packaging InformationMuntin Bar Size
MillimeterSmall Carton
Part # PiecesLarge Carton
Part # Pieces5.5 x 18 .183 .6868 x 18 .283 .6868 x 25 .283 .970
Specification In InchesMuntin Bar Size
Millimeter A B
E 9Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Contour External IntersectPolyester
Part numbers shown are standard white color. Produced from pre-colored UV Stable polyester and is available in all standard muntin barcolors. Please see Color Selection Chart available in front of catalog.
B A
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)
5.5 x 18 138423 200 138418 7008 x 18 138470 150 138466 5008 x 25 301840 75 138692 250
Packaging InformationMuntin Bar Size
MillimeterSmall Carton
Part # PiecesLarge Carton
Part # Pieces5.5 x 18 .183 .6868 x 18 .283 .6868 x 25 .275 .970
Specification In InchesMuntin Bar Size
Millimeter A B
E 10 Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Contour External Intersect w/ Glass Buffer HolePolyester
Part numbers shown are standard white color. Produced from pre-colored UV Stable polyester and is available in all standard muntin bar colors. Please see Color Selection Chart available in front of catalog.
B A
Side View Top ViewPart numbers shown are standard white.
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)
5.5 x 18 TBA 200 138885 7008 x 18 138889 150 138888 5008 x 25 TBA 75 138890 250
Packaging InformationMuntin Bar Size
MillimeterSmall Carton
Part # PiecesLarge Carton
Part # Pieces5.5 x 18 .183 .6868 x 18 .283 .6868 x 25 .275 .970
Specification In InchesMuntin Bar Size
Millimeter A B
Glass Buffer
5.5 x 18 200063 7008 x 18 210648 1508 x 25 210648 150
Packaging InformationMuntin Bar Size
Millimeter Part # Pieces
E 11Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Contour External T-Shape IntersectPolyester
B
T Shaped
A
Part numbers shown are standard white color. Produced from pre-colored UV Stable polyester and is available in all standard muntin bar colors. Please see Color Selection Chart available in front of catalog.
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)
8 x 18 302314 200 300224 600
Packaging InformationMuntin Bar Size
MillimeterSmall Carton
Part # PiecesLarge Carton
Part # Pieces8 x 18 .283 .686
Specification In InchesMuntin Bar Size
Millimeter A B
E 12 Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Contour External 90° IntersectPolyester
B
Corner (90)
A
Part numbers shown are standard white color.Produced from pre-colored UV Stable polyester and is available in all standard muntin bar colors. Please see Color Selection Chart available in front of catalog.
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)
8 x 18 300209 200 300221 900
Packaging InformationMuntin Bar Size
MillimeterSmall Carton
Part # PiecesLarge Carton
Part # Pieces8 x 18 .283 .686
Specification In InchesMuntin Bar Size
Millimeter A B
E 13Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Contour Cap-Over IntersectPolyester
External Contour Cap-OverPolyester
Top View
B
Side View
A
Part numbers shown are standard white color.
Part numbers shown are standard white color. Produced from pre-colored UV Stable polyester and is available in all standard muntin bar colors. Please see Color Selection Chart available in front of catalog.
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)
Top View Side View 3 Quarter View
A
B
5.5 x 18 301835 200 138893 7008 x 18 138896 150 138898 5008 x 25 TBA 75 138897 300
Packaging InformationMuntin Bar Size
MillimeterSmall Carton
Part # PiecesLarge Carton
Part # Pieces5.5 x 18 .183 .6878 x 18 .283 .6878 x 25 .275 .962
Specification In InchesMuntin Bar Size
Millimeter A B
5.5 x 18 138932 14008 x 18 138934 10008 x 25 138935 600
Packaging InformationMuntin Bar Size
Millimeter Part # Pieces
5.5 x 18 .147 .8508 x 18 .197 .8508 x 25 .197 1.114
Specification In InchesMuntin Bar Size
Millimeter A B
E 14 Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Cap-Over w/ Glass Buffer HolePolyester
Side View Top View
Part numbers shown are standard white color. Produced from pre-colored UV Stable polyester and is available in all standard muntin bar colors. Please see Color Selection Chart available in front of catalog.
Top View Side View 3 Quarter View
A
B
Glass Buffer
5.5 x 18 300909 14008 x 18 301794 10008 x 25 301430 600
Packaging InformationMuntin Bar Size
Millimeter Part # Pieces
5.5 x 18 .147 .8508 x 18 .197 .8508 x 25 .197 1.114
Specification In InchesMuntin Bar Size
Millimeter A B
Part numbers shown are standard white color.
5.5 x 18 210648 1508 x 18 212305 1508 x 25 212305 150
Packaging InformationMuntin Bar Size
Millimeter Part # Pieces
E 15Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
90° Cap-Over IntersectPolyester
Top View Side View
A
B
B A
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)
Part numbers shown are standard white color.
Part numbers shown are standard white color. Produced from pre-colored UV Stable polyester and is available in all standard muntin bar colors. Please see Color Selection Chart available in front of catalog.
90° Cap-OverPolyester
8 x 18 300566 200 300887 500
Packaging InformationMuntin Bar Size
MillimeterSmall Carton
Part # PiecesLarge Carton
Part # Pieces8 x 18 .283 .686
Specification In InchesMuntin Bar Size
Millimeter A B
8 x 18 301795 1000
Packaging InformationMuntin Bar Size
Millimeter Part # Pieces
8 x 18 .191 .860
Specification In InchesMuntin Bar Size
Millimeter A B
E 16 Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
A
T-Shape Cap-Over IntersectPolyester
Top View Side View
A
B
B
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)
Part numbers shown are standard white color.
Part numbers shown are standard white color. Produced from pre-colored UV Stable polyester and is available in all standard muntin bar colors. Please see Color Selection Chart available in front of catalog.
T-Shape Cap-OverPolyester
8 x 18 301504 1200
Packaging InformationMuntin Bar Size
Millimeter Part # Pieces
8 x 18 .191 .860
Specification In InchesMuntin Bar Size
Millimeter A B
8 x 18 300490 600
Packaging InformationMuntin Bar Size
Millimeter Part # Pieces
8 x 18 .283 .686
Specification In InchesMuntin Bar Size
Millimeter A B
E 17Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Contour Notch Cap-OverPolyester
Top View Side View Bottom View
B A
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)
Part numbers shown are standard white color.Produced from pre-colored UV Stable polyester and is available in all standard muntin bar colors. Please see Color Selection Chart available in front of catalog.
5.5 x 18 301169 10008 x 18 301029 8008 x 25 301378 400
Packaging InformationMuntin Bar Size
Millimeter Part # Pieces
5.5 x 18 .173 1.0408 x 18 .222 1.0458 x 25 .222 1.457
Specification In InchesMuntin Bar Size
Millimeter A B
E 18 Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Contour Internal Straight ConnectorNylon
2.728
A
B
A
Part numbers shown are standard natural nylon.
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)
5.5 x 18 301771 22008 x 18 138995 1400
Packaging InformationMuntin Bar Size
Millimeter Part # Pieces
5.5 x 18 .183 .6868 x 18 .283 .686
Specification In InchesMuntin Bar Size
Millimeter A B
E 19Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Contour 90° Internal IntersectGlass Filled Nylon
B
.300
A
CD
Part numbers shown are standard natural nylon.
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)C, ± .005 (.127mm)D, ± .005 (.127mm)
5.5 x 18 .183 .687 1.000 1.5608 x 18 .283 .686 1.000 1.6708 x 25 .275 .954 1.250 2.196
Specification In InchesMuntin Bar Size
Millimeter A B C D
5.5 x 18 301743 1500 TBA TBA8 x 18 300817 800 TBA TBA8 x 25 300818 500 TBA TBA
Packaging InformationMuntin Bar Size
MillimeterSmall Carton
Part # PiecesLarge Carton
Part # Pieces
E 20 Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Contour Internal Flexible IntersectNylon
B
.396
A
CD
Part numbers shown are standard natural nylon.
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)C, ± .005 (.127mm)D, ± .005 (.127mm)
5.5 x 18 .183 .687 1.000 1.9158 x 18 .283 .686 1.000 1.9158 x 25 .275 .954 1.250 2.165
Specification In InchesMuntin Bar Size
Millimeter A B C D
Packaging InformationMuntin Bar Size
Millimeter Part # Pieces
5.5 x 18 302220 10008 x 18 301799 8008 x 25 301800 500
E 21Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Contour Internal Straight IntersectGlass Filled Nylon
C
.300
B
D
A
C
B
A
Part numbers shown are standard natural nylon.
Part numbers shown are standard natural nylon.
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)C, ± .005 (.127mm)D, ± .005 (.127mm)
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)C, ± .005 (.127mm)
5.5 x 18 .183 .687 1.000 2.3068 x 18 .283 .686 1.000 2.3068 x 25 .275 .954 1.250 2.835
Specification In InchesMuntin Bar Size
Millimeter A B C D
5.5 x 18 300952 1100 300047 40008 x 18 301769 800 300049 30008 x 25 300954 500 300051 1800
Packaging InformationMuntin Bar Size
MillimeterSmall Carton
Part # PiecesLarge Carton
Part # Pieces
5.5 x 18 .183 .687 1.0008 x 18 .283 .686 1.0008 x 25 .275 .954 1.250
Specification In InchesMuntin Bar Size
Millimeter A B C
5.5 x 18 300953 1100 300048 40008 x 18 301770 800 300050 30008 x 25 300955 500 300052 1800
Packaging InformationMuntin Bar Size
MillimeterSmall Carton
Part # PiecesLarge Carton
Part # Pieces
Part B
Part A
E 22 Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Contour Internal Intersect KeeperNylon
Pin
A
770B
B
A
Part numbers shown are standard natural nylon.
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)
TOLERANCEA, ± .001 (.025mm)B, ± .001 (.025mm)
5.5 x 18 300109 25008 x 18 138818 18008 x 25 300064 1200
Packaging InformationMuntin Bar Size
Millimeter Part # Pieces
5.5 x 18 .180 .6868 x 18 .280 .6868 x 25 .275 .962
Specification In InchesMuntin Bar Size
Millimeter A B
5.5 x 18 28mm 214127 100005.5 x 18 32mm 212618 100008 x 18 28mm 214127 100008 x 18 32mm 212618 100008 x 18 48mm 200553 100008 x 25 56mm 200558 10000
Packaging InformationMuntin Bar
Size MillimeterPin
Length Part # Pieces
Specification In InchesMuntin Bar
Size MillimeterPin
Length A B
5.5 x 18 28mm .067 1.105.5 x 18 32mm .067 1.268 x 18 28mm .067 1.108 x 18 32mm .067 1.268 x 18 48mm .067 1.898 x 25 56mm .067 2.20
E 23Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Contour Internal Variable Angle ConnectorNylon
Part B
Part A
Fixed Base w/ Barbed Prong
3pc connection
B A
B A
.500
B A
2pc connection Use (1) part A and (1) part B3pc connection Use (1) part A and (2) part B
Part numbers shown are standard natural nylon.
Part numbers shown are standard natural nylon.
Part numbers shown are standard natural nylon. * Not available .415.
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)C, ± .005 (.127mm)
5.5 x 18 301283 15008 x 18 301259 10008 x 25 301487 500
Packaging InformationMuntin Bar Size
Millimeter Part # Pieces
5.5 x 18 .178 .6868 x 18 .278 .6868 x 25 .274 .962
Specification In InchesMuntin Bar Size
Millimeter A B
5.5 x 18 301284 30008 x 18 301260 20008 x 25 301488 1000
Packaging InformationMuntin Bar Size
Millimeter Part # Pieces
5.5 x 18 .178 .6868 x 18 .278 .6868 x 25 .274 .962
Specification In InchesMuntin Bar Size
Millimeter A B
5.5 x 18* 301287 10008 x 18* 301281 10008 x 25* 301530 500
Packaging InformationMuntin Bar Size
Millimeter Part # Pieces
5.5 x 18 .178 .5848 x 18 .278 .6008 x 25 .278 .620
Specification In InchesMuntin Bar Size
Millimeter A B
Replaces Part A.
E 24 Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Multi-Position Starburst (MPS) HubPolyester
Part numbers shown are standard white color. † Please note: 2 pieces required to make one hub unit 100 piece count carton makes 50 hubs.Produced from pre-colored UV Stable polyester and is available in all standard muntin bar colors. Please see Color Selection Chart available in front of catalog.
Part numbers shown are standard white color.† Please note: 2 pieces required to make one hub unit 100 piece count carton makes 50 hubs.Produced from pre-colored UV Stable polyester and is available in all standard muntin bar colors. Please see Color Selection Chart available in front of catalog.
w/ Pad Slot
w/ Solid Prong
AFront View
1.500
0˚ 18˚ 30˚
60˚
45˚54˚
69˚ (4" only)75˚ (5" only)
C
B
Side View View of Locator Ports
Please Specify: MPS Hub with Solid Prong or Pad.
5.5mm x 4" MPS Hub accommodates: Contour Muntin Bar 5.5 x 18Flat Muntin Bar 3/16" (.187) and 1/4" (.235)
8mm x 5" MPS Hub accommodates:Contour Muntin Bar 5.5 x 18, 8 x 18 and 8 x 25 Flat Muntin Bar 3/16" (.187), 1/4" (.235 or .250) and 3/8" (.325)
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)C, ± .005 (.127mm)
5.5mm x 4" 300537 100 300110 3008mm x 5" 301512 40 139006 150
Packaging Information
Muntin Bar Size Small CartonPart # Pieces†
Large CartonPart # Pieces†
5.5mm x 4" 4.0 2.0 .3358mm x 5" 5.0 2.5 .450
Specification In Inches
Muntin Bar Size A B C
5.5mm x 4" 4.0 2.0 .3358mm x 5" 5.0 2.5 .450
Specification In Inches
Muntin Bar Size A B C
5.5mm x 4" 302244 100 300015 3008mm x 5" 302330 40 300797 150
Packaging Information
Muntin Bar Size Small CartonPart # Pieces†
Large CartonPart # Pieces†
E 25Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Quarter Round MPS HubPolyester
A
Front Viewwith Solid Prong
A
Front Viewwith Pad Slot
C
B
Side View
Part numbers shown are standard white color. † Please note: 2 pieces required to make one hub unit 100 piece count carton makes 50 hubs.Produced from pre-colored UV Stable polyester and is available in all standard muntin bar colors. Please see Color Selection Chart available in front of catalog.
Part numbers shown are standard white color. † Please note: 2 pieces required to make one hub unit 100 piece count carton makes 50 hubs.Produced from pre-colored UV Stable polyester and is available in all standard muntin bar colors. Please see Color Selection Chart available in front of catalog.
w/ Pad Slot
w/ Solid Prong
Please Specify: Quarter Round MPS Hub with Solid Prong or Pad.
5.5mm x 4" Quarter Round MPS Hub accommodates: Contour Muntin Bar 5.5 x 18Flat Muntin Bar 3/16" (.187) and 1/4" (.235)
8mm x 5" Quarter Round MPS Hub accommodates:Contour Muntin Bar 5.5 x 18, 8 x 18 and 8 x 25 Flat Muntin Bar 3/16" (.187), 1/4" (.235 or .250) and 3/8" (.325)
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)C, ± .005 (.127mm)
5.5mm x 4" 300895 200 TBA 8008mm x 5" 301209 100 TBA 400
Packaging Information
Muntin Bar Size Small CartonPart # Pieces†
Large CartonPart # Pieces†
5.5mm x 4" 2.0 2.0 .3358mm x 5" 2.5 2.5 .450
Specification In Inches
Muntin Bar Size A B C
5.5mm x 4" 300085 200 300084 8008mm x 5" 301210 100 TBA 400
Packaging Information
Muntin Bar Size Small CartonPart # Pieces†
Large CartonPart # Pieces†
5.5mm x 4" 2.0 2.0 .3358mm x 5" 2.5 2.5 .450
Specification In Inches
Muntin Bar Size A B C
E 26 Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Contour MPS Hub KeeperPolyester
B A
CTOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)C, ± .005 (.127mm)
5.5 x 18 300038 20008 x 18 300074 14008 x 25 139000 1000
Packaging InformationMuntin Bar Size
Millimeter Part # Pieces
5.5 x 18 .180 .686 .7508 x 18 .280 .686 .7508 x 25 .275 .962 .792
Specification In InchesMuntin Bar Size
Millimeter A B C
Part numbers shown are standard white color.
5.5 x 18mm Contour MPS Hub Keeper will fit 5.5mm x 4" MPS Hub. 5.5 x 18mm, 8 x 18mm and 8 x 25mm Contour MPS Hub Keeper will fit 8mm x 5" MPS Hub.
E 27Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
MPS Hub PadNylon
A
B
Part numbers shown are standard black color.
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)
Specification In Inches
Pad SizeFractional Millimeter A B
Packaging Information
Pad SizeFractional Millimeter Part # Pieces
.420 300039 10007/16 11 TBA 1000
15/32 12 TBA 1000.480 300040 10001/2 301636 1000
17/32 13.5 TBA 10009/16 14.5 TBA 10005/8 16 TBA 1000
.420 .420 .6207/16 11 .437 .620
15/32 12 .468 .620.480 .480 .6201/2 .500 .620
17/32 13.5 .531 .6209/16 14.5 .562 .6205/8 16 .615 .620
E 28 Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Contour Internal Starburst - 3 PositionGlass Filled Nylon
.686
1.500A A
B
3-Position w/ Barbed Prong
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)
5.5 x 18 301285 200 TBA TBA8 x 18 301263 200 302868 700
Packaging InformationMuntin Bar Size
MillimeterSmall Carton
Part # PiecesLarge Carton
Part # Pieces5.5 x 18 .210 .1808 x 18 .308 .280
Specification In InchesMuntin Bar Size
Millimeter A B
Part numbers shown are natural nylon.Also available in solid prong.
5/16 301171 200 301233 700 NA NA NA NA
.420 301037 200 TBA 700 302333 200 TBA TBA
.480 301796 200 TBA 700 302779 200 TBA TBA
Part numbers shown are natural nylon. * 5.5 x 18 B = .1808 x 18 B = .280
.686
1.500A A
B
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)
3-Position w/ Pad
5/16 .303 *
.420 .420 *
.480 .480 *
Specification In InchesMuntin Bar
Size Fractional A B
Packaging InformationMuntin Bar
Size5.5 X 18 Small Carton
Part # Pieces5.5 X 18 Large Carton
Part # Pieces8 X 18 Small Carton
Part # Pieces8 X 18 Large Carton
Part # Pieces
Specification In InchesMuntin Bar
Size Millimeter A B
Packaging InformationMuntin Bar
Size5.5 X 18 Small Carton
Part # Pieces5.5 X 18 Large Carton
Part # Pieces8 X 18 Small Carton
Part # Pieces8 X 18 Large Carton
Part # Pieces
E 29Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
5-Position w/ Pad
.686
AA
B
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)
Specification In InchesMuntin Bar
Size Millimeter A B
Part numbers shown are natural nylon. * 5.5 x 18 B = .1808 x 18 B = .280
5-Position w/ Barbed Prong
.686
A1.500
A
B
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)
5.5 x 18 302245 75 301286 3008 x 18 TBA TBA 301264 200
Packaging InformationMuntin Bar Size
MillimeterSmall Carton
Part # PiecesLarge Carton
Part # Pieces5.5 x 18 .210 .1808 x 18 .308 .280
Part numbers shown are natural nylon.Also available in solid prong.
Contour Internal Starburst - 5 PositionGlass Filled Nylon
Specification In InchesMuntin Bar Size
Millimeter A B
Packaging InformationMuntin Bar Size
Millimeter5.5 X 18 Small Carton
Part # Pieces5.5 X 18 Large Carton
Part # Pieces8 X 18 Small Carton
Part # Pieces8 X 18 Large Carton
Part # Pieces
Specification In InchesMuntin Bar
Size Fractional A B
5/16 301445 75 301234 300 NA NA NA NA
.420 302708 75 301038 300 302332 50 TBA TBA
.480 301797 75 TBA 300 TBA 250 TBA TBA
Packaging InformationMuntin Bar Size
Fractional5.5 X 18 Small Carton
Part # Pieces5.5 X 18 Large Carton
Part # Pieces8 X 18 Small Carton
Part # Pieces8 X 18 Large Carton
Part # Pieces5/16 .303 *
.420 .420 *
.480 .480 *
E 30 Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Contour External Starburst - 3 positionPolyester
Solid Prong
Barbed Prong
Part numbers shown are standard white color with a .500 Prong distance. Only available in 2 Prong. Produced from pre-colored UV Stable polyester and is available in all standard muntin bar colors.Please see Color Selection Chart available in front of catalog.
Part numbers shown are standard white color with a .500 Prong distance. Only available in 2 Prong. Produced from pre-colored UV Stable polyester and is available in all standard muntin bar colors.Please see Color Selection Chart available in front of catalog.
.500 or .415
.686TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)
.500 or .415
.686TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)
5.5 x 18 301452 300 TBA 1000
Packaging InformationMuntin Bar Size
MillimeterSmall Carton
Part # PiecesLarge Carton
Part # Pieces
5.5 x 18 302242 300 302373 1000
Packaging InformationMuntin Bar Size
MillimeterSmall Carton
Part # PiecesLarge Carton
Part # Pieces
E 31Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Contour External Starburst - 5 positionPolyester
Solid Prong
Barbed Prong
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)
Part numbers shown are standard white color with a .500 Prong distance. Only available in 2 Prong. Produced from pre-colored UV Stable polyester and is available in all standard muntin bar colors.Please see Color Selection Chart available in front of catalog.
Part numbers shown are standard white color with a .500 Prong distance. Only available in 2 Prong. Produced from pre-colored UV Stable polyester and is available in all standard muntin bar colors.Please see Color Selection Chart available in front of catalog.
5.5 x 18 302845 100 302607 400
Packaging InformationMuntin Bar Size
MillimeterSmall Carton
Part # PiecesLarge Carton
Part # Pieces
.500 or .415
.686
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)
.500 or .415
.686
5.5 x 18 301449 100 TBA 400
Packaging InformationMuntin Bar Size
MillimeterSmall Carton
Part # PiecesLarge Carton
Part # Pieces
E 32 Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Elliptical HubPolyester
TBA TBA 302320 120
Packaging InformationSmall Carton
Part # Pieces†Large Carton
Part # Pieces†
Part numbers shown are standard white color.
M 2 0 0 0 M U N T I N B A R
M2000 Contour Muntin Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .F-2
M2000 Contour Muntin Bar Internal Straight Intersect . . . . . . . . .F-3
F 1
M2000 Contour Muntin BarPainted, Mill Finish, Clear & Color In™ Anodized Aluminum
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Part numbers shown are standard white color.Available in solid & tutone colors. Please see Color Selection Chart located in front of catalog.
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)
8 x 26 207695 84 1064 8 x 26 .315 1.024
Packaging Information
Muntin BarSize Millimeter Part #
Pieces Per Shipping Carton
12' 8" Lengths
Lineal Feet PerShipping Carton
12' 8" Lengths
Specification In Inches
Muntin Bar Size Millimeter A B
A
B
F 2
M2000
Note: Available in pre-cut lengths.
SPECIAL NOTICECleaning and Handling of Muntin Bar
We recommend muntin bar to be wiped clean before installation into an insulating glass unit. A household grade liquid cleaner may be used for this purpose.To avoid breakdown of painted surfaces, do not use M.E.K., Triethane, Alcohol or like substances for the cleaning of painted muntin bar.When machining and processing muntin bar in yourplant, keep saw tables and work areas free of saw cutfilings to avoid scratching the painted surfaces.
F 3Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
M2000 Contour Muntin Bar Internal Straight Intersect
Glass Filled Nylon
C
.300
B
D
A
C
B
A
Part numbers shown are natural nylon.
Part numbers shown are natural nylon.
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)C, ± .005 (.127mm)D, ± .005 (.127mm)
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)C, ± .005 (.127mm)
8 x 26 .275 .980 1.250 2.875
Specification In InchesMuntin Bar Size
Millimeter A B C D
8 x 26 TBA 400 300798 1600
Packaging InformationMuntin Bar Size
MillimeterSmall Carton
Part # PiecesLarge Carton
Part # Pieces
8 x 26 .275 .980 1.250 NA
Specification In InchesMuntin Bar Size
Millimeter A B C D
8 x 26 TBA 400 300700 1600
Packaging InformationMuntin Bar Size
MillimeterSmall Carton
Part # PiecesLarge Carton
Part # Pieces
Part B
Part B
Part A
Part A
E X T R U D E D C O N T O U RM U N T I N B A R
Extruded Contour Muntin Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . .G-2
Extruded Contour Straight Connector . . . . . . . . . . . . . . . . . . . . . . .G-3
Extruded Contour Straight Intersect Part A . . . . . . . . . . . . . . . . . .G-4
Extruded Contour Keeper w/ Barbed Prong . . . . . . . . . . . . . . . .G-5
Extruded Contour 90° Intersect . . . . . . . . . . . . . . . . . . . . . . . . . . . .G-6
G–1
G–2
Extruded Contour Muntin BarAluminum: Painted, Mill Finish
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
A
B
Part numbers shown are standard white color.Please contact your sales representative for color availability.
Material Thickness: .047
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)
5.5 X 18 209929 60 7608 X 18 209928 50 6338 X 25 209927 40 506
5.5 X 18 .217 .7098 X 18 .315 .7098 X 25 .315 .984
Packaging Information
Muntin Bar SizeMillimeter Part #
Pieces PerShipping Carton
12' 8" Lengths
Lineal Feet PerShipping Carton
12' 8" Lengths
Specification In Inches
Muntin Bar SizeMillimeter A B
Note: Available in tutone or custom colors.
SPECIAL NOTICECleaning and Handling of Muntin Bar
We recommend muntin bar to be wiped clean before installation into an insulating glass unit. A household grade liquid cleaner may be used for this purpose.
To avoid breakdown of painted surfaces, do not use M.E.K., Triethane, Alcohol or like substances for the cleaning of painted muntin bar.
When machining and processing muntin bar in yourplant, keep saw tables and work areas free of saw cutfilings to avoid scratching the painted surfaces.
G–3
Extruded Contour Straight ConnectorGlass-Filled Nylon
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
C
AB
Part numbers shown are standard natural nylon.
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)C, ± .005 (.127mm)
5.5 x 18 1.525 .698 .1048 x 18 1.525 .698 .2028 x 25 1.575 .974 .202
Specification In Inches
Muntin Bar SizeMillimeter A B C
5.5 x 18 TBA TBA8 x 18 302780 15008 x 25 TBA TBA
Packaging Information
Muntin Bar SizeMillimeter Part # Pieces
G–4
Extruded Contour Straight Intersect Part A*Glass-Filled Nylon
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
B
C
2.056
A
Part numbers shown are standard natural nylon.*Uses Contour Internal Straight Intersect Part B.
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)C, ± .005 (.127mm)
5.5 x 18 .104 .244 .7508 x 18 .202 .244 .7508 x 25 .202 .244 .750
Specification In Inches
Muntin Bar SizeMillimeter A B C
5.5 x 18 301822 40008 x 18 301514 30008 x 25 302665 1800
Packaging Information
Muntin Bar SizeMillimeter Part # Pieces
G–5
Extruded Contour Keeper w/ Barbed ProngGlass-Filled Nylon
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
A
B
C.500 or .415
Part numbers shown are standard natural nylon with a .500 Prong distance.Also available in Solid Prong.
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)
5.5 x 18 .204 .698 .5008 x 18 .304 .698 .5008 x 25 .304 .974 .500
Specification In Inches
Muntin Bar SizeMillimeter A B C
Packaging Information
Muntin Bar SizeMillimeter
1 ProngPart # Pieces
2 ProngPart # Pieces
5.5 x 18 TBA TBA 301211 40008 x 18 302533 2500 301212 25008 x 25 TBA TBA 301213 1600
G–6
Extruded Contour 90° IntersectGlass-Filled Nylon
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
B
C
D
A
Part numbers shown are standard natural nylon.
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)C, ± .005 (.127mm)D, ± .005 (.127mm)
8 x 18 .283 .686 1.000 1.5608 x 25 .275 .954 1.250 2.060
Specification In Inches
Muntin Bar SizeMillimeter A B C D
8 x 18 301203 8008 x 25 301204 500
Packaging Information
Muntin Bar SizeMillimeter Part # Pieces
S L I M L I N E M U N T I N B A R
Slimline Muntin Bar and Components . . . . . . . . . . . . . . . . . . . . . .H-2
H–1
H–2
Slimline Muntin Bar (.230 x 5/16) & ComponentsAluminum: Painted, Mill Finish, Clear & Color-InTM Anodized
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
*Color-InTM Anodized Aluminum
Only available in colors listed above.
Slimline Components
A
B
White 202609 300 3800Bronze 202610 300 3800
Dark Oak 202611 300 3800Light Oak 202612 300 3800
Bright Gold* 202613 300 3800E. Gold* 203539 300 3800
White .230 .313Bronze .230 .313
Dark Oak .230 .313Light Oak .230 .313
Bright Gold* .230 .313E. Gold* .230 .313
Packaging Information
Muntin Bar Color Part #Pieces Per
Shipping Carton12' 8" Lengths
Lineal Feet PerShipping Carton
12' 8" Lengths
Specification In Inches
Muntin Bar Color A B
1/4 x 5/16 Finned Keeper w/Snaploc 300811 75001/4 x 5/16 1P Finned Keeper .086 302084 75001/4 x 5/16 Keeper-1 Barbed Prong 301858 7500 1/4 x 5/16 2 Prong Keeper BP 302831 75001/4 x 5/16 2 Prong Keeper Solid 302758 7500.235 x 5/16 MB Clip N 302792 5000.230 x 5/16 3 Position Starburst 150028 1000.230 x 5/16 5 Position Starburst 150029 1000
Packaging Information
Muntin Bar Size Description Part # Pieces
Note: Available in pre-cut lengths and custom colors.
P F G P E N C I LM U N T I N B A R
PFG Pencil Muntin Bar, Center Key and Center Cover . . . . . . . . . . . . . . . . . . . .I-2Keeper, Keeper Cover, and Y Angle Connector . . . . . . . . . . . . . . . . . . . . . . . . . . .I-3
I–1
I–2
PFG Pencil Muntin BarAluminum
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
A
B
B A
B A
5.5 x 7.5 118 124256 120 5.5 x 7.5 5.5 7.5
Packaging Information
Muntin BarSize
MillimeterLength Part # Pieces
Specification In Millimeters
Muntin BarSize
MillimeterA B
5.5 x 7.5 124260 420 5.5 x 7.5 5.5 7.5
Packaging Information
Muntin BarSize
MillimeterPart # Pieces
Specification In Millimeters
Muntin BarSize
MillimeterA B
5.5 x 7.5 5.5 7.5
Packaging Information
Muntin BarSize
MillimeterPart # Pieces
Specification In Millimeters
Muntin BarSize
MillimeterA B
Center KeyNylon
Center CoverAluminum
5.5 x 7.5 216867 420 pairs, 840 pcs per crtn
Part number shown is bright gold.
I–3Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
B
A
B
A
B
A
5.5 x 7.5 60° 206101 3645.5 x 7.5 90° 218541 3645.5 x 7.5 120° 206102 364
5.5 x 7.5 5.5 7.55.5 x 7.5 5.5 7.55.5 x 7.5 5.5 7.5
Packaging Information
Muntin BarSize
MillimeterSize Part # Pieces
Specification In Millimeters
Muntin BarSize
MillimeterA B
5.5 x 7.5 124262 672 5.5 x 7.5 5.5 7.5
Packaging Information
Muntin BarSize
MillimeterPart # Pieces
Specification In Millimeters
Muntin BarSize
MillimeterA B
5.5 x 7.5 124261 168 5.5 x 7.5 5.5 7.5
Packaging Information
Muntin BarSize
MillimeterPart # Pieces
Specification In Millimeters
Muntin BarSize
MillimeterA B
KeeperNylon
Keeper CoverAluminum
Y Angle ConnectorNylon
S I M U L A T E D D I V I D E D L I T EM U N T I N B A R
SDL (Simulated Divided Lite) Bar - Zippered Top (ZT) . . . . . . . .J-2
SDL (Simulated Divided Lite) Bar - Perforated Top (PT) . . . . . . . .J-3
SDL Intersect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .J-4
SDL T-Intersect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .J-5
J–1
J–2
SDL (Simulated Divided Lite) Bar - ZTAluminum: Mill Finish, Clear & Color-In™ Anodized
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
A
B
“Zippered” Top and Bottom
Note: other sizes available upon request. *Part numbers shown are Anodized ZT.
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)
.187 x .500 TBA 335 4243
.187 x .562 TBA 280 3547
.187 x .625 140105 260 3293
.187 x .750 140150 215 2723
.187 x .812 TBA 138 1748.187 x 1.000 201745 165 2090.235 x .500 TBA 265 3357.235 x .625 140091 205 2597.235 x .750 TBA 95 1203.235 x 1.000 205682 130 1647.250 x 1.000 TBA 70 887.250 x .625 TBA 198 2508.250 x 750 TBA 160 2027.312 x .500 TBA 196 2483.312 x .625 TBA 150 1900.325 x .500 TBA 196 2483.325 x .625 140093 150 1900.325 x .750 TBA 125 1583.325 x .875 140197 110 1393.325 x 1.000 140210 90 1140.375 x .500 TBA 165 2090.375 x .625 TBA 120 1520.375 x .875 TBA 96 1216.437 x .500 TBA 125 1583.437 x .625 TBA 110 1393.437 x .750 TBA 90 1140.437 x .875 210652 80 1013.437 x 1.000 TBA 70 887.500 x .500 TBA 110 1393.500 x .750 209401 80 1013.500 x .875 TBA 72 912.500 x 1.000 TBA 40 506.625 x .625 TBA 75 950
.187 x .500 .187 .500.187 x 562 .187 .562.187 x .625 .187 .625.187 x .750 .187 .750.187 x .812 .187 .812.187 x 1.000 .187 1.000.235 x .500 .235 .500.235 x .625 .235 .625.235 x .750 .235 .750.235 x 1.000 .235 1.000.250 x 1.000 .250 1.000.250 x .625 .250 .625.250 x .750 .250 .750.312 x .500 .312 .500.312 x .625 .312 .625.325 x .500 .325 .500.325 x .625 .325 .625.325 x .750 .325 .750.325 x .875 .325 .875.325 x 1.000 .325 1.000.375 x .500 .375 .500.375 x .625 .375 .625.375 x .875 .375 .875.437 x .500 .437 .500.437 x .625 .437 .625.437 x .750 .437 .750.437 x .875 .437 .875.437 x 1000 .437 1.000.500 x .500 .500 .500500 x 750 .500 .750.500 x .875 .500 .875.500 x 1.000 .500 1.000.625 x .625 .625 .625
Packaging Information
Muntin Bar SizeInches
Part # *Pieces Per
Shipping Carton12' 8" Lengths
Lineal Feet PerShipping Carton
12' 8" Lengths
Specification In Inches
Muntin Bar SizeInches
A B
ZT
Standard material thickness: .014Bendable material thickness: .016
J–3Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Note: other sizes available upon request. *Part numbers shown are Anodized PT.
SDL (Simulated Divided Lite) Bar - PTAluminum: Mill Finish, Clear & Color-In™ Anodized
A
B
“Perforated” Top and Bottom
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)
PT
.187 x .500 TBA 335 4243
.187 x .562 TBA 280 3547
.187 x .625 211595 260 3293
.187 x .750 140147 215 2723
.187 x .812 TBA 138 1748.187 x 1.000 TBA 165 2090.235 x .500 TBA 265 3357.235 x .625 217172 205 2597.235 x .750 TBA 95 1203.235 x 1.000 207690 130 1647.250 x 1.000 TBA 70 887.250 x .625 TBA 198 2508.250 x 750 TBA 160 2027.312 x .500 TBA 196 2483.312 x .625 TBA 150 1900.325 x .500 TBA 196 2483.325 x .625 140092 150 1900.325 x .750 140153 125 1583.325 x .875 140198 110 1393.325 x 1.000 140209 90 1140.375 x .500 TBA 165 2090.375 x .625 140097 120 1520.375 x .875 TBA 96 1216.437 x .500 207083 125 1583.437 x .625 207847 110 1393.437 x .750 TBA 90 1140.437 x .875 TBA 80 1013.437 x 1.000 TBA 70 887.500 x .500 TBA 110 1393.500 x .750 209767 80 1013.500 x .875 TBA 72 912.500 x 1.000 TBA 40 506.625 x .625 TBA 75 950
.187 x .500 .187 .500.187 x 562 .187 .562.187 x .625 .187 .625.187 x .750 .187 .750.187 x .812 .187 .812.187 x 1.000 .187 1.000.235 x .500 .235 .500.235 x .625 .235 .625.235 x .750 .235 .750.235 x 1.000 .235 1.000.250 x 1.000 .250 1.000.250 x .625 .250 .625.250 x .750 .250 .750.312 x .500 .312 .500.312 x .625 .312 .625.325 x .500 .325 .500.325 x .625 .325 .625.325 x .750 .325 .750.325 x .875 .325 .875.325 x 1.000 .325 1.000.375 x .500 .375 .500.375 x .625 .375 .625.375 x .875 .375 .875.437 x .500 .437 .500.437 x .625 .437 .625.437 x .750 .437 .750.437 x .875 .437 .875.437 x 1000 .437 1.000.500 x .500 .500 .500.500 x .750 .500 .750.500 x .875 .500 .875.500 x 1.000 .500 1.000.625 x .625 .625 .625
Packaging Information
Muntin Bar SizeInches
Part # *Pieces Per
Shipping Carton12' 8" Lengths
Lineal Feet PerShipping Carton
12' 8" Lengths
Specification In Inches
Muntin Bar SizeInches
A B
Standard material thickness: .014Bendable material thickness: .016
J–4 Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
SDL IntersectGlass-Filled Nylon
C
AB
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)C, ± .005 (.127mm)
3/8 x 7/8 .292 .852 .880.375 x 7/8 .345 .852 .8807/16 x 7/8 .406 .852 .8801/2 x 7/8 .470 .852 .880
1/2 x 1 .465 .978 1.005
Specification In Inches
Muntin Bar Size A B C
3/8 x 7/8 300624 400.375 x 7/8 301022 3507/16 x 7/8 301021 3001/2 x 7/8 301023 250
1/2 x 1 300492 150
Packaging Information
Muntin Bar Size Part # Pieces
Part numbers shown are standard natural nylon.
J–5Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
SDL T-IntersectGlass-Filled Nylon
C
AB
Part numbers shown are standard natural nylon.
TOLERANCEA, ± .005 (.127mm)B, ± .005 (.127mm)C, ± .005 (.127mm)
1/2 x 1 .465 .978 1.005
Specification In Inches
Muntin Bar Size A B C
1/2 x 1 300493 200
Packaging Information
Muntin Bar Size Part # Pieces
S C R E E N C H A N N E L
Screen Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . .K-2
Internal Screen Corner . . . . . . . . . . . . . . . . . . . . . .K-3
Internal Stamped Screen Corner . . . . . . . . . . . . . .K-4
External Solid Screen Corner . . . . . . . . . . . . . . . . .K-5
External Solid Screen Corner w/ Sill Lift . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .K-6
External Solid Screen Corner w/ Spring Stop . . . . . . . . . . . . . . . . . . . . . . . . . . . . .K-7
External Solid Screen Corner w/ Spring Stop and Pull Handle . . . . . . . . . . . . .K-8
External Solid Screen Corner w/ Pull Handle . . . . . . . . . . . . . . . . . . . . . . . . . . . .K-9
External Hollow-Backed Screen Corner . . . . . . .K-10
External Hollow-Backed Screen Corner w/ Sill Lift . . . . . . . . . . . . . . . . . . . . . . . . .K-11
External Double-Recess Screen Corner . . . . . . .K-12
Screen Corner with Left and Right TabsCasement Screen Corner (Inside & Outside Casement)Stamped Aluminum Screen Corner . . . . . . . . . .K-13
A-209 Crossbar Clipand Screen Lift Tab . . . . . . . . . . . . . . . . . . . . . . . .K-14
A-800 .145 Screen Spline . . . . . . . . . . . . . . . . . . . .K-15
A-308 Plunger Cap and A-410 Plunger Spring . . . . . . . . . . . . . . . . . . . . . . . . . . . .K-16
A-349-L/A-350-L Finger Pulls . . . . . . . . . . . . . . .K-17
A-402 Leaf Spring and Corner Leaf Spring . . . .K-18
K–1
K 2 Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
A
BA
A
BB
A
BC
A
BF
A
BE
A
BG
A
BI
Available in solid colors. Please see Color Selection Chart located in front of catalog.Material thickness: .0185 * Material thickness: .024 Tolerance A: ± .005, B: ± .005Call Allmetal Customer Service for part numbers.
A 5/16 x 3/4 1520 120A 3/8 x 3/4 1267 100A 7/16 x 3/4 1140 90B 7/16 x 11/16 1140 90C 5/16 x 11/16 1773 140D 5/16 x 19/32 1710 135E 7/16 x 1 * 887 70F 7/16 x 3/4 x 3/4 633 50G 3/8 x 3/4 x 3/8 1013 80H 3/8 x 21/32 x 5/16 1267 100I 3/8 x 21/32 x 5/16 1267 100J 5/16 x 3/4 x 5/16 1267 100J 3/8 x 3/4 x 5/16 1140 90K 3/8 x 9/16 x 5/16 1267 100L 3/8 x 21/32 x 5/16 1267 100
A 5/16 x 3/4 .313 .750A 3/8 x 3/4 .375 .750A 7/16 x 3/4 .438 .750B 7/16 x 11/16 .438 .688C 5/16 x 11/16 .313 .665D 5/16 x 19/32 .313 .594E 7/16 x 1 * .438 1.000F 7/16 x 3/4 x 3/4 1.183 .765G 3/8 x 3/4 x 3/8 .781 .750H 3/8 x 21/32 .375 .656I 3/8 x 21/32 .375 .656J 5/16 x 3/4 .313 .750J 3/8 x 3/4 .375 .750K 3/8 x 9/16 .375 .863L 3/8 x 21/32 .5 .094
Packaging Information
Profile Screen ChannelSize
Lineal Feet PerShipping Carton
12' 8" Lengths
Pieces Per Shipping Carton
152"(12' x 8")
Specification In Inches
Profile Screen ChannelSize A B
Note: Available in pre-cut lengths.
A
BD
A
BH
Outside Casement Inside Casement
A
BJ
A
BJ
Screen Channel
A
B
K
.200
A
LB
Crossbar
K–3
Internal Screen CornerMolded Plastic
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
AB
Part numbers shown are standard white color.
A 5/16 x 3/4 139037 200 139036 800 300124 10000A 3/8 x 3/4 139057 200 139056 600 TBA 8800A 7/16 x 3/4 139090 150 139078 600 300190 8000B 7/16 x 11/16 139250 200 139251 800 TBA TBAE 7/16 x 1 TBA 100 TBA 400 TBA TBA
Packaging Information
ProfileScreen
Channel Size
Small CartonPart # Pieces
Large CartonPart # Pieces
BarrelPart # Pieces
A 5/16 x 3/4 .269 .515A 3/8 x 3/4 .332 .515A 7/16 x 3/4 .394 .515B 7/16 x 11/16 .390 .425E 7/16 x 1 .389 .692
Specification In Inches
ProfileScreen
Channel Size
A B
TOLERANCEA, ± .005 (.127mm) B, ± .005 (.127mm)
K–4
Internal Stamped Screen CornerMill Finish Aluminum
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
AB
TOLERANCEA, ± .005 (.127mm) B, ± .005 (.127mm)
A 5/16 x 3/4 139259 300 139256 1100A 3/8 x 3/4 139288 300 139286 1000A 7/16 x 3/4 139315 250 139310 900E 7/16 x 1 TBA TBA 200060 400
Packaging Information
ProfileScreen
Channel SizeSmall Carton
Part # PiecesLarge Carton
Part # Pieces
A 5/16 x 3/4 .269 .520A 3/8 x 3/4 .335 .520A 7/16 x 3/4 .397 .520E 7/16 x 1 .385 .685
Specification In Inches
ProfileScreen
Channel SizeA B
Part numbers shown are Mill Finish.
K–5
External Solid Screen CornerMolded Plastic
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
AB
TOLERANCEA, ± .005 (.127mm) B, ± .005 (.127mm)
A 5/16 x 3/4 139354 200 139351 800 139362 10000A 3/8 x 3/4 139424 200 139407 600 139429 8000A 7/16 x 3/4 139459 150 139460 600 300534 7500E 7/16 x 1" TBA TBA 139670 300 TBA TBA
Packaging Information
ProfileScreen
Channel SizeSmall Carton
Part # PiecesLarge Carton
Part # PiecesBarrel
Part # Pieces
A 5/16 x 3/4 .269 .515A 3/8 x 3/4 .332 .515A 7/16 x 3/4 .394 .515E 7/16 x 1" .389 .692
Specification In Inches
ProfileScreen
Channel SizeA B
Part numbers shown are standard white color.
K–6
External Solid Screen Corner w/ Sill LiftMolded Plastic
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
AB
TOLERANCEA, ± .005 (.127mm) B, ± .005 (.127mm)
A 5/16 x 3/4 300806 200 300299 800 300133 10000A 3/8 x 3/4 302318 200 300134 600 TBA 8000A 7/16 x 3/4 TBA 150 300033 600 TBA 7500
Packaging Information
ProfileScreen
Channel SizeSmall Carton
Part # PiecesLarge Carton
Part # PiecesBarrel
Part # Pieces
A 5/16 x 3/4 .269 .515A 3/8 x 3/4 .332 .515A 7/16 x 3/4 .394 .515
Specification In Inches
ProfileScreen
Channel SizeA B
Part numbers shown are standard white color.
K–7
External Solid Screen Corner w/ Spring StopMolded Plastic
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
AB
BackView Front View
A 5/16 x 3/4 302517 200 140040 800 TBA TBAA 3/8 x 3/4 TBA 200 300767 600 TBA TBAA 7/16 x 3/4 TBA 150 302292 600 TBA TBA
Packaging Information
ProfileScreen
Channel SizeSmall Carton
Part # PiecesLarge Carton
Part # PiecesBarrel
Part # Pieces
A 5/16 x 3/4 .269 .515A 3/8 x 3/4 .332 .515A 7/16 x 3/4 .394 .515
Specification In Inches
ProfileScreen
Channel SizeA B
Part numbers shown are standard white color.
TOLERANCEA, ± .005 (.127mm) B, ± .005 (.127mm)
K–8 Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Pull Handle Screen Corner w/ Spring StopMolded Plastic
A 5/16 x 3/4 TBA TBA 302640 600A 3/8 x 3/4 TBA TBA 302644 500
Packaging Information
ProfileScreen
Channel SizeSmall Carton
Part # PiecesLarge Carton
Part # Pieces
Part numbers shown are standard white color.
TOLERANCEA, ± .005 (.127mm) B, ± .005 (.127mm)
A 5/16 x 3/4 TBA TBA 302639 600A 3/8 x 3/4 TBA TBA 302643 500
Packaging Information
ProfileScreen
Channel SizeSmall Carton
Part # PiecesLarge Carton
Part # Pieces
Part numbers shown are standard white color.
1.00"
B
A
A 5/16 x 3/4 .269 .515A 3/8 x 3/4 .332 .515
Specification In Inches
ProfileScreen
Channel SizeA B
A 5/16 x 3/4 .269 .515A 3/8 x 3/4 .332 .515
Specification In Inches
ProfileScreen
Channel SizeA B
1.00"
B
A
TOLERANCEA, ± .005 (.127mm) B, ± .005 (.127mm)
Pull Handle Screen Corner Without StopMolded Plastic
K–9Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
A 5/16 x 3/4 TBA TBA 302642 600A 3/8 x 3/4 TBA TBA 302646 500
Packaging Information
ProfileScreen
Channel SizeSmall Carton
Part # PiecesLarge Carton
Part # Pieces
Part numbers shown are standard white color.
TOLERANCEA, ± .005 (.127mm) B, ± .005 (.127mm)
1.00"
BA
Pull Handle Screen Corner w/ Spring StopPart “B”
Molded Plastic
1.00"
BA
Pull Handle Screen CornerPart “B”
Molded Plastic
A 5/16 x 3/4 TBA TBA 302641 600A 3/8 x 3/4 TBA TBA 302645 500
Packaging Information
ProfileScreen
Channel SizeSmall Carton
Part # PiecesLarge Carton
Part # Pieces
Part numbers shown are standard white color.
A 5/16 x 3/4 .269 .515A 3/8 x 3/4 .332 .515
Specification In Inches
ProfileScreen
Channel SizeA B
A 5/16 x 3/4 .269 .515A 3/8 x 3/4 .332 .515
Specification In Inches
ProfileScreen
Channel SizeA B
TOLERANCEA, ± .005 (.127mm) B, ± .005 (.127mm)
K–10
External Hollow-Back Screen CornerMolded Plastic
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
AB
FrontView
TOLERANCEA, ± .005 (.127mm) B, ± .005 (.127mm)
A 5/16 x 3/4 139726 200 139714 800 139717 10000A 3/8 x 3/4 139768 200 139747 600 139749 8200A 7/16 x 3/4 139780 150 139777 600 139784 7500
Packaging Information
ProfileScreen
Channel SizeSmall Carton
Part # PiecesLarge Carton
Part # PiecesBarrel
Part # Pieces
A 5/16 x 3/4 .269 .515A 3/8 x 3/4 .332 .515A 7/16 x 3/4 .394 .515
Specification In Inches
ProfileScreen
Channel SizeA B
Part numbers shown are standard white color.
K–11
External Hollow-Back Screen Corner w/ Sill LiftMolded Plastic
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
AB
FrontView
TOLERANCEA, ± .005 (.127mm) B, ± .005 (.127mm)
Part numbers shown are standard white color.
A 5/16 x 3/4 TBA 200 302483 800 TBA 10000A 3/8 x 3/4 TBA 200 TBA 600 TBA 8200A 7/16 x 3/4 TBA 150 TBA 600 TBA 7500
Packaging Information
ProfileScreen
Channel SizeSmall Carton
Part # PiecesLarge Carton
Part # PiecesBarrel
Part # Pieces
A 5/16 x 3/4 .269 .515A 3/8 x 3/4 .332 .515A 7/16 x 3/4 .394 .515
Specification In Inches
ProfileScreen
Channel SizeA B
K–12
External Double-Recess Screen CornerMolded Plastic
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
AB
TOLERANCEA, ± .005 (.127mm) B, ± .005 (.127mm)
A 5/16 x 3/4 139943 200 139937 800 139938 10000A 3/8 x 3/4 TBA 200 139950 600 139953 8200A 7/16 x 3/4 139967 150 139964 600 TBA 7500
Packaging Information
ProfileScreen
Channel SizeSmall Carton
Part # PiecesLarge Carton
Part # PiecesBarrel
Part # Pieces
A 5/16 x 3/4 .269 .515A 3/8 x 3/4 .332 .515A 7/16 x 3/4 .394 .515
Specification In Inches
ProfileScreen
Channel SizeA B
Part numbers shown are standard white color.
K 13
Screen Corners
Casement Screen CornerOutside Double Hung Corner
& Inside Casement CornerMolded Plastic
Screen CornerLeft and Right Tabs
Molded Plastic
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
.331.557.331 .557
TOLERANCE A, ± .005 (.127mm), B, ± .005 (.127mm)
H 3/8 x 21/32 215523 1000
Packaging Information
Profile ScreenChannel Size
With Left and Right Hand Tabs(Outside)
Part # Pieces*H 3/8 x 21/32 203698 1000I 3/8 x 21/32 203699 1000L 3/8 x 21/32 226564 1000
Packaging Information
Profile ScreenChannel Size
With 5/16 LipPart # Pieces
Part numbers shown are standard white color.H Outside Casement, I Inside Casement*500 pieces left hand and 500 pieces right hand
Specification In Inches
Profile ScreenChannel Size A B
K 14
A-209 Crossbar ClipAluminum: Mill Finish
Screen Lift TabAluminum
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
AB
TOLERANCEA, ± .005 (.127mm) B, ± .005 (.127mm)
C 5/16 x 11/16 140970 1000 140968 10000
Packaging Information
Profile ScreenChannel Size
Small CartonPart # Pieces
Large CartonPart # Pieces
C 5/16 x 11/16 .460 .264
White 217929 1000Mill 226060 1000
Bronze 229677 1000
Screen Lift Tab Part # PiecesPackaging Information
Part numbers shown are mill finish aluminum.
K 15Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
.145 Serrated Screen SplineFlexible Vinyl
B
A
Hollow 226439 3692 .145 134°Solid 226440 3692 .145 134°
Packaging Information Specification In Inches
Type Part # Approx.feet /carton A B
Part numbers shown are standard black color. Carton weight is 30 lbs. Contains 2 spools of 15 lbs. each.
Screen Warning LabelsPart #226338 (200 per roll)
Not shown to scale. Actual size 3" x .500".
K 16 Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
A-410 Plunger SpringSteel Wire
A
B 5/32 x 1/2 140927 10000
Packaging Information
Size CartonPart # Pieces
5/32 x 1/2 .165 .500
Specification In Inches
Size A B
A-308 Plunger CapNylon
.285
.180
.440
TOLERANCEA, ± .005 (.127mm) B, ± .005 (.127mm)
White 141024 2000 141025 10000Black TBA TBA 141022 10000
Note: A-308 Plunger Cap fits all 5/32 plunger sizes.
Packaging Information
Color Small CartonPart # Pieces
Large CartonPart # Pieces
A-315 Plunger PinAluminum
5/32 221867 10000
Packaging Information
Size CartonPart # Pieces
1.475
.156
K–17Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
A-349-L /A-350-L Finger PullsVinyl
B
A+ + +
TOLERANCEA, ± .005 (.127mm) B, ± .005 (.127mm)
A-349-L .050 Flexible Vinyl 209042 8500 TBA TBAA-350-L .050 Rigid Vinyl 140956 4000 TBA TBA
Packaging Information
SizeSmall Carton
Part # PiecesLarge Carton
Part # Pieces
A-349-L .050 Flexible Vinyl .215 .936A-350-L .050 Rigid Vinyl .215 .936
Specification In Inches
Size A B
Part numbers shown are standard black color.
K 18 Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
.020 Leaf SpringStainless Steel
A
B
Part numbers shown are standard stainless steel.
TOLERANCEA, ± .005 (.127mm) B, ± .005 (.127mm)
3" 2.890 .250
Specification In Inches
Size A B
3" 140919 8000
Packaging Information
Size Small CartonPart # Pieces
Corner Leaf SpringHeat Treated 1050 Steel Zinc Plated
1.2415
A 2.6875
B.250
Part numbers shown are standard stainless steel.
TOLERANCEA, ± .005 (.127mm) B, ± .005 (.127mm)
2 11/16" 2.6875 .250
Specification In Inches
Size A B
2 11/16" 211950 10000
Packaging Information
Size Small CartonPart # Pieces
S I L L T R A C K
Sill Track Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .L-2
L–1
L–2
Sill Track Cover*
Stainless Steel
Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
*Cut to length sizes available upon request.
.250 x .260 .250 .260 .174
Specification In Inches
Sill Track Size A B C
B
A
C
Packaging Information*
Sill Track Size Pieces
.250 x .260 150
S L I T C O I L
Pre-Slit Tin Plate and Aluminum . . . . . . . . . . . . . . . . . . . . . . . . . . .M-2
Slit Coil Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .M-3
M–1
M 2 Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
Pre-Slit Tin Plate and Aluminum
Pre-Slit Painted Aluminum
Slit width tolerance: +.000/ .005
Available in .0185" gauge (standard)
All standard colors offered by Allmetalare available including wood grains
Aluminum coiled painted side out foreasy identification
Cardboard cores used on all paintedcoils for tight wrap
Outside coil diameter not to exceed 36"for ease of handling
Coils are separated by spacers in positions 12, 3, 6, and 9 to prevent damage and provide easy access byhooks or slings
Skids will not exceed 10 coilsapproximately 2500 lbs. for easy shipment and storage
l
l
l
l
l
l
l
l
SLIT COILSLIT COIL
M–3Please see terms & conditions of sale.Copyright © 2008 Allmetal, Inc.
SLIT COILSLIT COIL
Gray 81 .0185 • • •
Golden Oak* 339 .016 • •
Dark Brown* 126 .016, .0185 • • • •
Beige 70 .0185 • •
Almond Wood 78 .0185 • •
Dusty Grey 338 .016 •
Check with your Customer Service Representative or Sales Representative on Tutone and Custom Colors for Contour and Flat Muntin Bar.This is a complete list of colors available. Colors and Gauges are subject to change without notice.* Some color samples may not be represented in the color samples section of this catalog. Golden Oak and Dark Brown will not be replenished† Colors with gloss levels up to 25° are approved for Heat Mirror I.G. units by Southwall Technologies.
Color Name Number Gauge Screen ChannelFlat Muntin Bar &Contoured Muntin
Bar 8 x 25mm
Contoured Muntin Bar5.5 x 18mm, 8 x 18mm
8 x 18mm & 5.5 x 25mmAir Spacer †Approved for
Heat Mirror
White 50 .016, .0185, .0215, .024 • • •
H.G. Cameo White 75 .0185 • •
White-HM 45 .0185 • • •
Tan 71 .016, .0185, .024 • • • •
Sandtone-A 104 .016, .0185, .0215 • • •
Champagne 80 .016, .0185, .024 • • •
Canvas 150 .016 •
Fawn 172 .0185 • •
Desert Sand II 182 .0185 • •
Boulder Tan 192 .016 •
Earthtone 72 .016, .0185 • • •Terratone -A 103 .016, .0185, .024 • • • •
Chestnut 94 .016, .0185 • • • •
Bronze 60 .0185, .024 • • •Bronze-H 61 • • • •.016, .0185, .024Bronze-J 62 .0185 • •
Bronze-R 64 .0185 • •
Black 77 .0185 • •Green 39 .016, .0185 • • • •
Brick Red 120 .0185 • •
Light Oak 34 .016, .0185 • • • •Dark Oak 35 .016, .0185 • • • •
Amber Oak 110 .016 • •Cherry Oak 122 .016 • •
Grey Anodized 12 .014, .016 • • •Clear Anodized 10 .010, .014, .016, .020 • • • •
Mill Finish 30 .016, .0185, .024 • • • •Light Bronze Color-InTM 21 .014, .016 • • •Dark Bronze Color-InTM 20 .014, .016 • • •
Black Color-InTM 27 .014, .016 • • •E-Gold Color-InTM 23 .014, .016 • • •
Bright Gold 24 .016 • • •Hi-Q Steel 11 .008, .012 • •Black Steel 17 .015 • •
Bright White 51 .016, .0185, .024 • • •Nova White 52 .016, .0185 • • •
Porsche White 76 .016, .0185 • • •
White -96 57 .016, .0185 • • •
Tan-M 261 .0185 • • •
American Clay 173 .0185 • •
Raw Aluminum Material Availability
M 1-2 Slit Coil.qxp 5/21/10 2:07 PM Page M–3