how to setup quick spc to export data in text or excel -compatible format · 2018. 3. 16. · spc...
TRANSCRIPT
-
How to setup QuickSPC to export data in
TEXTor EXCEL®-compatible
format
-
1) Open Gage Explorer and select“Data Transfer”
2) Click on “START”
-
STEP #1
Selecting Data Files & Filter type
-
METHOD #1
• Select Filter
• MOVE or Drag & Drop data filesbetween panes
-
1) Select the desired filter
-
2) Press button• “Move selected” to move one data file ata time from left to right pane
OR• Drag & Drop data file(s) from left paneto right pane
OR• “Move all” to move all data files fromleft pane to right pane
-
Click here to move one data file
Click here to move all data files
-
3) Verify filter choice
-
METHOD #2
• Modify individual data files
-
3) Select the data file that you wantstored as either TXT or CSV
-
4) Right Click on the data file
5) Click on “change filter”
-
6) Select the desired filter
-
7) Press OK
-
8) Verify filter choice
-
STEP #2
Specifying:
• DATA FORMAT
• TRIGGERS
-
9) Click on ICON
-
10) Double Click on format
-
11) Select the desired fields tobe stored inside the file -
SEE IMPORTANT NOTEON NEXT SLIDE
-
IMPORTANT NOTEThe maximum number of columns allowed in Excel
is 256 !Therefore, the following formula applies:
(Number of characteristic columns) x
(Number of measurements) +
1 for date & time---------------------------------------------
must be less than 256
-
Column A
Column B
Column C
Column D
Column E
Column F
Column G
Column H
Column I
Column J
-
12) Click on Triggers tab
Be sure you have at least one Trigger programmed,otherwise
13) Right click inside this Window
14) Select “New”
-
15) Use “Trigger Wizard” toprogram a trigger
-
16) SAVE
-
17) Click on Data Apply