how to setup vrt- 402n with mh-2001?. outline connections topology vrt-402n setup mh-2001 setup
TRANSCRIPT
Internet
LAN AIP Subnet 192.168.0.x
VRT-402NLAN: 192.168.0.1 / 24
WAN: 10.0.0.1 / 24
LAN BIP Subnet 192.168.1.x
MH-2001LAN: 192.168.1.1 / 24WAN1: 10.0.0.2 / 24
Connection Topology
Tunneling
VRT-402 Setup
In Security – VPN/ ISEC
Add New PolicyKey in MH-2001’s WAN IP Address
Key in MH-2001’s LAN IP Subnet and the netmask
Key in the pre-share key , example on “12….0”
Select the rest configuration where should match to MH-2001.
Confirm the settings
Save Settings!!
MH-2001 Setup - 1/2
In Policy Object -> VPN ->IPSec Autokey
Select NewEntry
Key in VRT-402N’s WAN port IP Address.
Key in the pre-share key that match to VRT-402N
Select the Phase 1, Phase 2 Parameters that exactly the same to VRT-402N
Then, OK to apply this rule.
MH-2001 Setup - 2/2
In Policy Object -> VPN -> Tunnel
Select NewEntry
Key in the local subnet and mask
Key in the remote subnet and mask
Select the IPSEC policy just inserted.And click on OK to apply.
After the policy applied, the icon will shows the link stauts
Hint
At MH-2001– You can check the log to see the information, if you encounter
some connection issues.
Connection fail– For most of the time, IF you failed in the connection, it could be
IP setup issues. Please do check:– Have you key in the correct WAN IP for both ends.– Have you key in the correct IP Subnet for both ends.– Have you choose the correct Encryption for both ends. Say,
Phase 1, phase 2.
This example also applies to:– SG-500, SG-1000, CS-1000, CS-2000