how to up-grade rtn

[HOW TO UPGRADE RTN LINK ]

Types of Up-gradation

a. Upgrade the Working Mode (Software).1) Case-1: To upgrade from 4E1 (1+0) to 16E1 (1+0)

2) Case-2: To upgrade from 4E1 (1+0) to 16E1 (1+1)

3) Case-3: To upgrade from 16E1 (1+1) to STM 1

b. Change the SCC Board (Hardware).c. Upgrade the Software version of IDU by TOOLKIT (without

changing SCC board).

Networks Product Line

Upgrade RTN-Release-12009-Feb-18

Procedure to Upgrade Microwave link

Tools & Test Equipment Required:

Wrapping Tool Punching Tool Tie Cutter

Screw Driver Set Bert Meter Label Printer

Measuring Tape Marker Pen Hammer

Hammer Multimeter Nose Pliers

Camera Wire Cutter Crimpling Pliers

Pliers Knife Ladder

2 Networks product line


Case 1

Objective:

To upgrade Huawei Microwave (RTN 600 series) from 4E1 (1+0) to 16E1 (1+0)

RTN Hardware Requirement:

PH1 Board Tributary cable DDF/Crone

RTN Software Requirement:

WEBLCT: With updated version (V2R6 software) Runtime Java (V5), required for WEBLCT


Punching/Wrapping tool Tie Cutter Screw driver setLabel Printer Knife E1 TagsTies BERT meter

Other Requirement

Revised Link Budget E1/DDF Plan Laptop with XP Windows LAN cable (With both sides RJ45 connectors)



Procedure: How to Upgrade;

1. Please refer to “How to Login in Huawei RTN” document, if you are having difficulty in login;

2. After you login, following window will appear;(Make sure, all cards are green color, which means “Installed & Running”

Saving “Cross Connect Configuration” (very important…)

3. Click NE (NE49136) click “Function tree” click “Configuration” & click “Cross Configuration”;

[Note down “Cross Connect Configuration (CCC)” or take snapshot for re-configuration][After “CCC” is saved, delete configuration]

Up-grade Working Mode

4. Starting from “Far end”, Up-grade working mode; (4E1, 7MHz, QPSK 16E1, 28MHz, QPSK)


Before up-gradation

After up-gradation


Creating “Cross Connect Configuration” (to restore services…)

5. Click NE Function tree Configuration Cross Connect Configuration;6. Click NEW Button.

7. Enter information of service (as saved) and click “OK” or “Apply”;

8. Install PH1 Board, DDF & Route the “Tributary cable”;

9. Patch E1 according to the given E1/DDF plan;



Case 2

Objective:

To upgrade Huawei Microwave (RTN 600 series) from 4E1 (1+0) to 16E1 (1+1)


IDU 620 PH1 Board IF BoardTributary cables DDF/Crone IF cablesHybrid Coupler ODU




Punching/Wrapping tool Tie Cutter Screw driver setBERT meter Ties E1 TagsLabel Printer Knife Hex key wrenchWrench Adjustable wrench Cable CutterAdhesive tape Weather proofing Crimpling PliersCamera Multimeter Heat Gun

Other Requirement










Hardware Installation

4. Install Hybrid Coupler, ODU, IF Cable, IF Board, PH1 Board, Tributary Cable, and DDF.



Configuration

5. Make IF (1+1 Protection) and Configure the IDU according to the Revised Link Budget.


6. Starting from “Far end”, Up-grade working mode; (4E1, 7MHz, QPSK 16E1, 28MHz, QPSK)


7. Click NE Function tree Configuration Cross Connect Configuration;


Before up-gradation

After up-gradation


8. Click NEW Button. Enter information of service (as saved) and click “Apply” and “OK”;

9. Install PH1 Board, DDF & Route the “Tributary cable”;

10.Patch E1 according to the given E1/DDF plan;

After upgrade please run PRBS test.

Case 3



Objective:

To upgrade Huawei Microwave (RTN 600 series) from 16E1 (1+1) to STM1 (1+1)


SL1 Board Patch Cord




Camera Screw driver set TiesLabel Printer Adhesive tape

Other Requirement











4. Starting from “Far end”, Up-grade working mode; (16E1, 28MHz, QPSK STM-1, 28MHz, 128QAM)


5. Click NE Function tree Configuration Cross Connect Configuration;


Before up-gradation

After up-gradation


6. Click NEW Button. Enter information of service (as saved) and click “Apply” and “OK”;

7. Click “Apply” and “OK”

After upgrade please run PRBS test.


how to up-grade rtn

Documents