how to use this install guidecdncontent2.idatalink.com/corporate/content/manuals/rr-gms/ads … ·...
TRANSCRIPT
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certifi ed technician. Logos and trademarks used here in are the properties of their respective owners.
WARNINGPressing the printer icon or “quick printing” this document will print
all of the guides in this compilation.
Open the Bookmarks menu and find your vehicle OR scroll down until you find the install guide for your vehicle.
Print only the pages for your vehicle using the advanced options in the Print menu.
Install your Maestro RR according to the guide for your vehicle.
HOW TO USE THIS INSTALL GUIDE1
2
3
SELECT VEHICLE PRINT PAGES NEEDED
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SR)-GMS05-AS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro GM5+ Installation Harness
INSTALL GUIDEBUICk ENCLAvE
2008-2014Retains steeRing wheel contRols, onstaR, bluetooth and moRe!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
buick enclave 2008-2014
Automotive Data Solutions Inc. © 2015 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Before Installing 3
Installation Instructions 4
Wiring Diagram with an Amplifi er 5
Wiring Diagram without an Amplifi er 6
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
buick enclave 2008-2014
Automotive Data Solutions Inc. © 2015 3
BEFORE INSTALLING STEP 1
DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:
METHOD 1: Look for the following logos in the vehicle. They are usually on the speaker covers or on the radio unit. If you fi nd any of the following logos Bose, Pioneer or Monsoon, you have a factory amplifi er.
METHOD 2: Look for the following sticker in the glove box. This sticker will indicate all the Regular Production Option (RPO) codes. If you fi nd any of the following codes UQA, UQS or UQG, you have a factory amplifi er.
STEP 2IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:
Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifi er and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits.
IF YOUR VEHICLE NOT IS EQUIPPED WITH A FACTORY AMPLIFIER:
Follow the installation instructions and complete the installation as shown in the wiring diagram without an amplifi er.
1
SERVICE PARTS IDENTIFICATION DO NOT REMOVE
AGI AG2 AJ1 AL0 AM7 AN3 AU0 AU3 A31 B30 B4UB58 B81 B82 CJ3 C49 C7H DF5 DK7 DL3 DT4 D07EVA E63 FF8 FF9 GT5 G80 JC4 KC4 KNP KUP K34K47 K68 LQ9 M32 NCI NEI NP3 NP5 OSG P30 QSSR4Y R9U R9Z SAF SLM TRB UC6 UK3 UQA U2K UFIUF3 UK3 VR4 VTV VXS V73 XSS X88 YD3 YD6 YE9YSS ZGC ZYI Z60 Z82 ISS ISZ 4IU 6YT 691 6927YT
BC/CC U 8555 692
143 5 FXWH2Q CKI57532GCEK19N031344764
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
buick enclave 2008-2014
Automotive Data Solutions Inc. © 2015 4
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.
STEP 2
• Connect the factory harness to the GM5+ T-harness.
STEP 3• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
STEP 4• Connect all the harnesses to the Maestro RR module then
proceed to module setup.
The module is now ready to be used.
Insert the aftermarket radio in the dashboard housing and test all the functionalities.
Reassemble the dashboard carefully.
AMPLIFIER ONLYDETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS
• If your vehicle is equipped with a factory amplifi er you can connect the RCA wiring to the low level outputs of your aftermarket radio, or connect the level matching circuits to the speaker outputs of the aftermarket radio.
• If your aftermarket radio does not have low level outputs, has only a single RCA output, or the RCA output level is 2 volts or less then it is recommended to connect the level matching circuit to the speaker outputs. If the volume does not go loud enough using the RCA connections, the level matching circuits can be used.
• The internal amplifi er in some radios is not compatible with the level matching circuit. In these cases, there will be fl oor noise (hissing or buzzing at low levels) when the level matching circuit is connected. Change to the RCA connections to eliminate this noise.
TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
1
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
buick enclave 2008-2014
Automotive Data Solutions Inc. © 2015 5
B
C
A FG
C
AB
G
F
CENTERCENTER
SUBSUB
BACKUP CAMBACKUP CAM
1A
E
E
BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED
MAESTRO RR MODULE
MAINHARNESS
RCA CABLES
WIRES FROMVEHICLE
GMS05+ T-HARNESS
FACTORY RADIO HARNESS
SPEAKER
WHITE
OR
WHITE/BLACKGRAYGRAY/BLACKGREENGREEN/BLACK
PURPLE/BLACKPURPLE
STEP 1
STEP 2
STEP 3
STEP 4
SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS
LF SPEAKER
RF SPEAKER
LR SPEAKER
RR SPEAKER
BROWN - MUTE (-)
CONNECT TOAFTERMARKET RADIO
CONNECT TO RADIO WITH LOW LEVEL OUTPUT:
CONNECT TO RADIO WITH HIGH LEVEL OUTPUT:
WIRING DIAGRAM with an Amplifier
STEERING WHEELCONTROL CABLE
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
buick enclave 2008-2014
Automotive Data Solutions Inc. © 2015 6
BACKUP CAMBACKUP CAM
CENTERCENTER
SUBSUB
B
C
A FG
C
AB
G
F
1B
E
E
STEP 1
BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)
MAINHARNESS
RCA CABLES
WIRES FROMVEHICLE
GMS05+ T-HARNESS
FACTORY RADIO HARNESS
(NOT CONNECTED)
(NOT CONNECTED)
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
STEP 2
STEP 3
STEP 4
SPEAKER
MAESTRO RR MODULE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED
BROWN - MUTE (-)
CONNECT TOAFTERMARKET RADIO
SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS
WIRING DIAGRAM without an Amplifier
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
STEERING WHEELCONTROL CABLE
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SR)-GMS05-AS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro GM5+ Installation Harness
INSTALL GUIDEBUICk LUCERNE
2006-2011Retains steeRing wheel contRols, onstaR, bluetooth and moRe!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
buick luceRne 2006-2011
Automotive Data Solutions Inc. © 2015 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Before Installing 3
Installation Instructions 4
Wiring Diagram with an Amplifi er 5
Wiring Diagram without an Amplifi er 6
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
buick luceRne 2006-2011
Automotive Data Solutions Inc. © 2015 3
BEFORE INSTALLING STEP 1
DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:
METHOD 1: Look for the following logos in the vehicle. They are usually on the speaker covers or on the radio unit. If you fi nd any of the following logos Bose, Pioneer or Monsoon, you have a factory amplifi er.
METHOD 2: Look for the following sticker in the glove box. This sticker will indicate all the Regular Production Option (RPO) codes. If you fi nd any of the following codes UQA, UQS or UQG, you have a factory amplifi er.
STEP 2IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:
Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifi er and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits.
IF YOUR VEHICLE NOT IS EQUIPPED WITH A FACTORY AMPLIFIER:
Follow the installation instructions and complete the installation as shown in the wiring diagram without an amplifi er.
1
SERVICE PARTS IDENTIFICATION DO NOT REMOVE
AGI AG2 AJ1 AL0 AM7 AN3 AU0 AU3 A31 B30 B4UB58 B81 B82 CJ3 C49 C7H DF5 DK7 DL3 DT4 D07EVA E63 FF8 FF9 GT5 G80 JC4 KC4 KNP KUP K34K47 K68 LQ9 M32 NCI NEI NP3 NP5 OSG P30 QSSR4Y R9U R9Z SAF SLM TRB UC6 UK3 UQA U2K UFIUF3 UK3 VR4 VTV VXS V73 XSS X88 YD3 YD6 YE9YSS ZGC ZYI Z60 Z82 ISS ISZ 4IU 6YT 691 6927YT
BC/CC U 8555 692
143 5 FXWH2Q CKI57532GCEK19N031344764
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
buick luceRne 2006-2011
Automotive Data Solutions Inc. © 2015 4
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.
STEP 2
• Connect the factory harness to the GM5+ T-harness.
STEP 3• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
STEP 4• Connect all the harnesses to the Maestro RR module then
proceed to module setup.
The module is now ready to be used.
Insert the aftermarket radio in the dashboard housing and test all the functionalities.
Reassemble the dashboard carefully.
AMPLIFIER ONLYDETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS
• If your vehicle is equipped with a factory amplifi er you can connect the RCA wiring to the low level outputs of your aftermarket radio, or connect the level matching circuits to the speaker outputs of the aftermarket radio.
• If your aftermarket radio does not have low level outputs, has only a single RCA output, or the RCA output level is 2 volts or less then it is recommended to connect the level matching circuit to the speaker outputs. If the volume does not go loud enough using the RCA connections, the level matching circuits can be used.
• The internal amplifi er in some radios is not compatible with the level matching circuit. In these cases, there will be fl oor noise (hissing or buzzing at low levels) when the level matching circuit is connected. Change to the RCA connections to eliminate this noise.
TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
1
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
buick luceRne 2006-2011
Automotive Data Solutions Inc. © 2015 5
B
C
A FG
C
AB
G
F
CENTERCENTER
SUBSUB
BACKUP CAMBACKUP CAM
1A
E
E
BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED
MAESTRO RR MODULE
MAINHARNESS
RCA CABLES
WIRES FROMVEHICLE
GMS05+ T-HARNESS
FACTORY RADIO HARNESS
SPEAKER
WHITE
OR
WHITE/BLACKGRAYGRAY/BLACKGREENGREEN/BLACK
PURPLE/BLACKPURPLE
STEP 1
STEP 2
STEP 3
STEP 4
SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS
LF SPEAKER
RF SPEAKER
LR SPEAKER
RR SPEAKER
BROWN - MUTE (-)
CONNECT TOAFTERMARKET RADIO
CONNECT TO RADIO WITH LOW LEVEL OUTPUT:
CONNECT TO RADIO WITH HIGH LEVEL OUTPUT:
WIRING DIAGRAM with an Amplifier
STEERING WHEELCONTROL CABLE
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
buick luceRne 2006-2011
Automotive Data Solutions Inc. © 2015 6
BACKUP CAMBACKUP CAM
CENTERCENTER
SUBSUB
B
C
A FG
C
AB
G
F
1B
E
E
STEP 1
BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)
MAINHARNESS
RCA CABLES
WIRES FROMVEHICLE
GMS05+ T-HARNESS
FACTORY RADIO HARNESS
(NOT CONNECTED)
(NOT CONNECTED)
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
STEP 2
STEP 3
STEP 4
SPEAKER
MAESTRO RR MODULE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED
BROWN - MUTE (-)
CONNECT TOAFTERMARKET RADIO
SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS
WIRING DIAGRAM without an Amplifier
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
STEERING WHEELCONTROL CABLE
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SR)-GMS05-AS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro GM5+ Installation Harness
INSTALL GUIDECADILLAC DTS
2006-2011Retains steeRing wheel contRols, onstaR, bluetooth and moRe!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
cadillac dts 2006-2011
Automotive Data Solutions Inc. © 2015 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Before Installing 3
Installation Instructions 4
Wiring Diagram with an Amplifi er 5
Wiring Diagram without an Amplifi er 6
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
cadillac dts 2006-2011
Automotive Data Solutions Inc. © 2015 3
BEFORE INSTALLING STEP 1
DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:
METHOD 1: Look for the following logos in the vehicle. They are usually on the speaker covers or on the radio unit. If you fi nd any of the following logos Bose, Pioneer or Monsoon, you have a factory amplifi er.
METHOD 2: Look for the following sticker in the glove box. This sticker will indicate all the Regular Production Option (RPO) codes. If you fi nd any of the following codes UQA, UQS or UQG, you have a factory amplifi er.
STEP 2IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:
Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifi er and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits.
IF YOUR VEHICLE NOT IS EQUIPPED WITH A FACTORY AMPLIFIER:
Follow the installation instructions and complete the installation as shown in the wiring diagram without an amplifi er.
1
SERVICE PARTS IDENTIFICATION DO NOT REMOVE
AGI AG2 AJ1 AL0 AM7 AN3 AU0 AU3 A31 B30 B4UB58 B81 B82 CJ3 C49 C7H DF5 DK7 DL3 DT4 D07EVA E63 FF8 FF9 GT5 G80 JC4 KC4 KNP KUP K34K47 K68 LQ9 M32 NCI NEI NP3 NP5 OSG P30 QSSR4Y R9U R9Z SAF SLM TRB UC6 UK3 UQA U2K UFIUF3 UK3 VR4 VTV VXS V73 XSS X88 YD3 YD6 YE9YSS ZGC ZYI Z60 Z82 ISS ISZ 4IU 6YT 691 6927YT
BC/CC U 8555 692
143 5 FXWH2Q CKI57532GCEK19N031344764
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
cadillac dts 2006-2011
Automotive Data Solutions Inc. © 2015 4
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.
STEP 2
• Connect the factory harness to the GM5+ T-harness.
STEP 3• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
STEP 4• Connect all the harnesses to the Maestro RR module then
proceed to module setup.
The module is now ready to be used.
Insert the aftermarket radio in the dashboard housing and test all the functionalities.
Reassemble the dashboard carefully.
AMPLIFIER ONLYDETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS
• If your vehicle is equipped with a factory amplifi er you can connect the RCA wiring to the low level outputs of your aftermarket radio, or connect the level matching circuits to the speaker outputs of the aftermarket radio.
• If your aftermarket radio does not have low level outputs, has only a single RCA output, or the RCA output level is 2 volts or less then it is recommended to connect the level matching circuit to the speaker outputs. If the volume does not go loud enough using the RCA connections, the level matching circuits can be used.
• The internal amplifi er in some radios is not compatible with the level matching circuit. In these cases, there will be fl oor noise (hissing or buzzing at low levels) when the level matching circuit is connected. Change to the RCA connections to eliminate this noise.
TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
1
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
cadillac dts 2006-2011
Automotive Data Solutions Inc. © 2015 5
B
C
A FG
C
AB
G
F
CENTERCENTER
SUBSUB
BACKUP CAMBACKUP CAM
1A
E
E
BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED
MAESTRO RR MODULE
MAINHARNESS
RCA CABLES
WIRES FROMVEHICLE
GMS05+ T-HARNESS
FACTORY RADIO HARNESS
SPEAKER
WHITE
OR
WHITE/BLACKGRAYGRAY/BLACKGREENGREEN/BLACK
PURPLE/BLACKPURPLE
STEP 1
STEP 2
STEP 3
STEP 4
SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS
LF SPEAKER
RF SPEAKER
LR SPEAKER
RR SPEAKER
BROWN - MUTE (-)
CONNECT TOAFTERMARKET RADIO
CONNECT TO RADIO WITH LOW LEVEL OUTPUT:
CONNECT TO RADIO WITH HIGH LEVEL OUTPUT:
WIRING DIAGRAM with an Amplifier
STEERING WHEELCONTROL CABLE
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
cadillac dts 2006-2011
Automotive Data Solutions Inc. © 2015 6
BACKUP CAMBACKUP CAM
CENTERCENTER
SUBSUB
B
C
A FG
C
AB
G
F
1B
E
E
STEP 1
BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)
MAINHARNESS
RCA CABLES
WIRES FROMVEHICLE
GMS05+ T-HARNESS
FACTORY RADIO HARNESS
(NOT CONNECTED)
(NOT CONNECTED)
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
STEP 2
STEP 3
STEP 4
SPEAKER
MAESTRO RR MODULE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED
BROWN - MUTE (-)
CONNECT TOAFTERMARKET RADIO
SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS
WIRING DIAGRAM without an Amplifier
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
STEERING WHEELCONTROL CABLE
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SR)-GMS05-AS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro GM5+ Installation Harness
INSTALL GUIDECADILLAC ESCALADE
2007-2011Retains steeRing wheel contRols, onstaR, bluetooth and moRe!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
cadillac escalade 2007-2011
Automotive Data Solutions Inc. © 2015 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Before Installing 3
Installation Instructions 4
Wiring Diagram with an Amplifi er 5
Wiring Diagram without an Amplifi er 6
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
cadillac escalade 2007-2011
Automotive Data Solutions Inc. © 2015 3
BEFORE INSTALLING STEP 1
DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:
METHOD 1: Look for the following logos in the vehicle. They are usually on the speaker covers or on the radio unit. If you fi nd any of the following logos Bose, Pioneer or Monsoon, you have a factory amplifi er.
METHOD 2: Look for the following sticker in the glove box. This sticker will indicate all the Regular Production Option (RPO) codes. If you fi nd any of the following codes UQA, UQS or UQG, you have a factory amplifi er.
STEP 2IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:
Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifi er and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits.
IF YOUR VEHICLE NOT IS EQUIPPED WITH A FACTORY AMPLIFIER:
Follow the installation instructions and complete the installation as shown in the wiring diagram without an amplifi er.
1
SERVICE PARTS IDENTIFICATION DO NOT REMOVE
AGI AG2 AJ1 AL0 AM7 AN3 AU0 AU3 A31 B30 B4UB58 B81 B82 CJ3 C49 C7H DF5 DK7 DL3 DT4 D07EVA E63 FF8 FF9 GT5 G80 JC4 KC4 KNP KUP K34K47 K68 LQ9 M32 NCI NEI NP3 NP5 OSG P30 QSSR4Y R9U R9Z SAF SLM TRB UC6 UK3 UQA U2K UFIUF3 UK3 VR4 VTV VXS V73 XSS X88 YD3 YD6 YE9YSS ZGC ZYI Z60 Z82 ISS ISZ 4IU 6YT 691 6927YT
BC/CC U 8555 692
143 5 FXWH2Q CKI57532GCEK19N031344764
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
cadillac escalade 2007-2011
Automotive Data Solutions Inc. © 2015 4
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.
STEP 2
• Connect the factory harness to the GM5+ T-harness.
STEP 3• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
STEP 4• Connect all the harnesses to the Maestro RR module then
proceed to module setup.
The module is now ready to be used.
Insert the aftermarket radio in the dashboard housing and test all the functionalities.
Reassemble the dashboard carefully.
AMPLIFIER ONLYDETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS
• If your vehicle is equipped with a factory amplifi er you can connect the RCA wiring to the low level outputs of your aftermarket radio, or connect the level matching circuits to the speaker outputs of the aftermarket radio.
• If your aftermarket radio does not have low level outputs, has only a single RCA output, or the RCA output level is 2 volts or less then it is recommended to connect the level matching circuit to the speaker outputs. If the volume does not go loud enough using the RCA connections, the level matching circuits can be used.
• The internal amplifi er in some radios is not compatible with the level matching circuit. In these cases, there will be fl oor noise (hissing or buzzing at low levels) when the level matching circuit is connected. Change to the RCA connections to eliminate this noise.
TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
1
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
cadillac escalade 2007-2011
Automotive Data Solutions Inc. © 2015 5
B
C
A FG
C
AB
G
F
CENTERCENTER
SUBSUB
BACKUP CAMBACKUP CAM
1A
E
E
BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED
MAESTRO RR MODULE
MAINHARNESS
RCA CABLES
WIRES FROMVEHICLE
GMS05+ T-HARNESS
FACTORY RADIO HARNESS
SPEAKER
WHITE
OR
WHITE/BLACKGRAYGRAY/BLACKGREENGREEN/BLACK
PURPLE/BLACKPURPLE
STEP 1
STEP 2
STEP 3
STEP 4
SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS
LF SPEAKER
RF SPEAKER
LR SPEAKER
RR SPEAKER
BROWN - MUTE (-)
CONNECT TOAFTERMARKET RADIO
CONNECT TO RADIO WITH LOW LEVEL OUTPUT:
CONNECT TO RADIO WITH HIGH LEVEL OUTPUT:
WIRING DIAGRAM with an Amplifier
STEERING WHEELCONTROL CABLE
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
cadillac escalade 2007-2011
Automotive Data Solutions Inc. © 2015 6
BACKUP CAMBACKUP CAM
CENTERCENTER
SUBSUB
B
C
A FG
C
AB
G
F
1B
E
E
STEP 1
BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)
MAINHARNESS
RCA CABLES
WIRES FROMVEHICLE
GMS05+ T-HARNESS
FACTORY RADIO HARNESS
(NOT CONNECTED)
(NOT CONNECTED)
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
STEP 2
STEP 3
STEP 4
SPEAKER
MAESTRO RR MODULE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED
BROWN - MUTE (-)
CONNECT TOAFTERMARKET RADIO
SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS
WIRING DIAGRAM without an Amplifier
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
STEERING WHEELCONTROL CABLE
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SR)-GMS05-AS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro GM5+ Installation Harness
INSTALL GUIDECADILLAC ESCALADE
WIThOUT NAv 2012-2014Retains steeRing wheel contRols, onstaR, bluetooth and moRe!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
cadillac escalade without nav 2012-2014
Automotive Data Solutions Inc. © 2015 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Before Installing 3
Installation Instructions 4
Wiring Diagram with an Amplifi er 5
Wiring Diagram without an Amplifi er 6
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
cadillac escalade without nav 2012-2014
Automotive Data Solutions Inc. © 2015 3
BEFORE INSTALLING STEP 1
DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:
METHOD 1: Look for the following logos in the vehicle. They are usually on the speaker covers or on the radio unit. If you fi nd any of the following logos Bose, Pioneer or Monsoon, you have a factory amplifi er.
METHOD 2: Look for the following sticker in the glove box. This sticker will indicate all the Regular Production Option (RPO) codes. If you fi nd any of the following codes UQA, UQS or UQG, you have a factory amplifi er.
STEP 2IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:
Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifi er and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits.
IF YOUR VEHICLE NOT IS EQUIPPED WITH A FACTORY AMPLIFIER:
Follow the installation instructions and complete the installation as shown in the wiring diagram without an amplifi er.
1
SERVICE PARTS IDENTIFICATION DO NOT REMOVE
AGI AG2 AJ1 AL0 AM7 AN3 AU0 AU3 A31 B30 B4UB58 B81 B82 CJ3 C49 C7H DF5 DK7 DL3 DT4 D07EVA E63 FF8 FF9 GT5 G80 JC4 KC4 KNP KUP K34K47 K68 LQ9 M32 NCI NEI NP3 NP5 OSG P30 QSSR4Y R9U R9Z SAF SLM TRB UC6 UK3 UQA U2K UFIUF3 UK3 VR4 VTV VXS V73 XSS X88 YD3 YD6 YE9YSS ZGC ZYI Z60 Z82 ISS ISZ 4IU 6YT 691 6927YT
BC/CC U 8555 692
143 5 FXWH2Q CKI57532GCEK19N031344764
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
cadillac escalade without nav 2012-2014
Automotive Data Solutions Inc. © 2015 4
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.
STEP 2
• Connect the factory harness to the GM5+ T-harness.
STEP 3• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
STEP 4• Connect all the harnesses to the Maestro RR module then
proceed to module setup.
The module is now ready to be used.
Insert the aftermarket radio in the dashboard housing and test all the functionalities.
Reassemble the dashboard carefully.
AMPLIFIER ONLYDETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS
• If your vehicle is equipped with a factory amplifi er you can connect the RCA wiring to the low level outputs of your aftermarket radio, or connect the level matching circuits to the speaker outputs of the aftermarket radio.
• If your aftermarket radio does not have low level outputs, has only a single RCA output, or the RCA output level is 2 volts or less then it is recommended to connect the level matching circuit to the speaker outputs. If the volume does not go loud enough using the RCA connections, the level matching circuits can be used.
• The internal amplifi er in some radios is not compatible with the level matching circuit. In these cases, there will be fl oor noise (hissing or buzzing at low levels) when the level matching circuit is connected. Change to the RCA connections to eliminate this noise.
TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
1
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
cadillac escalade without nav 2012-2014
Automotive Data Solutions Inc. © 2015 5
B
C
A FG
C
AB
G
F
CENTERCENTER
SUBSUB
BACKUP CAMBACKUP CAM
1A
E
E
BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED
MAESTRO RR MODULE
MAINHARNESS
RCA CABLES
WIRES FROMVEHICLE
GMS05+ T-HARNESS
FACTORY RADIO HARNESS
SPEAKER
WHITE
OR
WHITE/BLACKGRAYGRAY/BLACKGREENGREEN/BLACK
PURPLE/BLACKPURPLE
STEP 1
STEP 2
STEP 3
STEP 4
SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS
LF SPEAKER
RF SPEAKER
LR SPEAKER
RR SPEAKER
BROWN - MUTE (-)
CONNECT TOAFTERMARKET RADIO
CONNECT TO RADIO WITH LOW LEVEL OUTPUT:
CONNECT TO RADIO WITH HIGH LEVEL OUTPUT:
WIRING DIAGRAM with an Amplifier
STEERING WHEELCONTROL CABLE
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
cadillac escalade without nav 2012-2014
Automotive Data Solutions Inc. © 2015 6
BACKUP CAMBACKUP CAM
CENTERCENTER
SUBSUB
B
C
A FG
C
AB
G
F
1B
E
E
STEP 1
BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)
MAINHARNESS
RCA CABLES
WIRES FROMVEHICLE
GMS05+ T-HARNESS
FACTORY RADIO HARNESS
(NOT CONNECTED)
(NOT CONNECTED)
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
STEP 2
STEP 3
STEP 4
SPEAKER
MAESTRO RR MODULE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED
BROWN - MUTE (-)
CONNECT TOAFTERMARKET RADIO
SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS
WIRING DIAGRAM without an Amplifier
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
STEERING WHEELCONTROL CABLE
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SR)-GMS05-AS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro GM5+ Installation Harness
INSTALL GUIDEChEvROLET AvALANChE
2007-2011Retains steeRing wheel contRols, onstaR, bluetooth and moRe!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
chevRolet avalanche 2007-2011
Automotive Data Solutions Inc. © 2015 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Before Installing 3
Installation Instructions 4
Wiring Diagram with an Amplifi er 5
Wiring Diagram without an Amplifi er 6
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
chevRolet avalanche 2007-2011
Automotive Data Solutions Inc. © 2015 3
BEFORE INSTALLING STEP 1
DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:
METHOD 1: Look for the following logos in the vehicle. They are usually on the speaker covers or on the radio unit. If you fi nd any of the following logos Bose, Pioneer or Monsoon, you have a factory amplifi er.
METHOD 2: Look for the following sticker in the glove box. This sticker will indicate all the Regular Production Option (RPO) codes. If you fi nd any of the following codes UQA, UQS or UQG, you have a factory amplifi er.
STEP 2IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:
Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifi er and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits.
IF YOUR VEHICLE NOT IS EQUIPPED WITH A FACTORY AMPLIFIER:
Follow the installation instructions and complete the installation as shown in the wiring diagram without an amplifi er.
1
SERVICE PARTS IDENTIFICATION DO NOT REMOVE
AGI AG2 AJ1 AL0 AM7 AN3 AU0 AU3 A31 B30 B4UB58 B81 B82 CJ3 C49 C7H DF5 DK7 DL3 DT4 D07EVA E63 FF8 FF9 GT5 G80 JC4 KC4 KNP KUP K34K47 K68 LQ9 M32 NCI NEI NP3 NP5 OSG P30 QSSR4Y R9U R9Z SAF SLM TRB UC6 UK3 UQA U2K UFIUF3 UK3 VR4 VTV VXS V73 XSS X88 YD3 YD6 YE9YSS ZGC ZYI Z60 Z82 ISS ISZ 4IU 6YT 691 6927YT
BC/CC U 8555 692
143 5 FXWH2Q CKI57532GCEK19N031344764
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
chevRolet avalanche 2007-2011
Automotive Data Solutions Inc. © 2015 4
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.
STEP 2
• Connect the factory harness to the GM5+ T-harness.
STEP 3• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
STEP 4• Connect all the harnesses to the Maestro RR module then
proceed to module setup.
The module is now ready to be used.
Insert the aftermarket radio in the dashboard housing and test all the functionalities.
Reassemble the dashboard carefully.
AMPLIFIER ONLYDETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS
• If your vehicle is equipped with a factory amplifi er you can connect the RCA wiring to the low level outputs of your aftermarket radio, or connect the level matching circuits to the speaker outputs of the aftermarket radio.
• If your aftermarket radio does not have low level outputs, has only a single RCA output, or the RCA output level is 2 volts or less then it is recommended to connect the level matching circuit to the speaker outputs. If the volume does not go loud enough using the RCA connections, the level matching circuits can be used.
• The internal amplifi er in some radios is not compatible with the level matching circuit. In these cases, there will be fl oor noise (hissing or buzzing at low levels) when the level matching circuit is connected. Change to the RCA connections to eliminate this noise.
TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
1
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
chevRolet avalanche 2007-2011
Automotive Data Solutions Inc. © 2015 5
B
C
A FG
C
AB
G
F
CENTERCENTER
SUBSUB
BACKUP CAMBACKUP CAM
1A
E
E
BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED
MAESTRO RR MODULE
MAINHARNESS
RCA CABLES
WIRES FROMVEHICLE
GMS05+ T-HARNESS
FACTORY RADIO HARNESS
SPEAKER
WHITE
OR
WHITE/BLACKGRAYGRAY/BLACKGREENGREEN/BLACK
PURPLE/BLACKPURPLE
STEP 1
STEP 2
STEP 3
STEP 4
SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS
LF SPEAKER
RF SPEAKER
LR SPEAKER
RR SPEAKER
BROWN - MUTE (-)
CONNECT TOAFTERMARKET RADIO
CONNECT TO RADIO WITH LOW LEVEL OUTPUT:
CONNECT TO RADIO WITH HIGH LEVEL OUTPUT:
WIRING DIAGRAM with an Amplifier
STEERING WHEELCONTROL CABLE
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
chevRolet avalanche 2007-2011
Automotive Data Solutions Inc. © 2015 6
BACKUP CAMBACKUP CAM
CENTERCENTER
SUBSUB
B
C
A FG
C
AB
G
F
1B
E
E
STEP 1
BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)
MAINHARNESS
RCA CABLES
WIRES FROMVEHICLE
GMS05+ T-HARNESS
FACTORY RADIO HARNESS
(NOT CONNECTED)
(NOT CONNECTED)
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
STEP 2
STEP 3
STEP 4
SPEAKER
MAESTRO RR MODULE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED
BROWN - MUTE (-)
CONNECT TOAFTERMARKET RADIO
SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS
WIRING DIAGRAM without an Amplifier
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
STEERING WHEELCONTROL CABLE
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SR)-GMS05-AS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro GM5+ Installation Harness
INSTALL GUIDEChEvROLET AvALANChEWIThOUT NAv 2012-2013
Retains steeRing wheel contRols, onstaR, bluetooth and moRe!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
chevRolet avalanche without nav 2012-2013
Automotive Data Solutions Inc. © 2015 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Before Installing 3
Installation Instructions 4
Wiring Diagram with an Amplifi er 5
Wiring Diagram without an Amplifi er 6
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
chevRolet avalanche without nav 2012-2013
Automotive Data Solutions Inc. © 2015 3
BEFORE INSTALLING STEP 1
DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:
METHOD 1: Look for the following logos in the vehicle. They are usually on the speaker covers or on the radio unit. If you fi nd any of the following logos Bose, Pioneer or Monsoon, you have a factory amplifi er.
METHOD 2: Look for the following sticker in the glove box. This sticker will indicate all the Regular Production Option (RPO) codes. If you fi nd any of the following codes UQA, UQS or UQG, you have a factory amplifi er.
STEP 2IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:
Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifi er and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits.
IF YOUR VEHICLE NOT IS EQUIPPED WITH A FACTORY AMPLIFIER:
Follow the installation instructions and complete the installation as shown in the wiring diagram without an amplifi er.
1
SERVICE PARTS IDENTIFICATION DO NOT REMOVE
AGI AG2 AJ1 AL0 AM7 AN3 AU0 AU3 A31 B30 B4UB58 B81 B82 CJ3 C49 C7H DF5 DK7 DL3 DT4 D07EVA E63 FF8 FF9 GT5 G80 JC4 KC4 KNP KUP K34K47 K68 LQ9 M32 NCI NEI NP3 NP5 OSG P30 QSSR4Y R9U R9Z SAF SLM TRB UC6 UK3 UQA U2K UFIUF3 UK3 VR4 VTV VXS V73 XSS X88 YD3 YD6 YE9YSS ZGC ZYI Z60 Z82 ISS ISZ 4IU 6YT 691 6927YT
BC/CC U 8555 692
143 5 FXWH2Q CKI57532GCEK19N031344764
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
chevRolet avalanche without nav 2012-2013
Automotive Data Solutions Inc. © 2015 4
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.
STEP 2
• Connect the factory harness to the GM5+ T-harness.
STEP 3• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
STEP 4• Connect all the harnesses to the Maestro RR module then
proceed to module setup.
The module is now ready to be used.
Insert the aftermarket radio in the dashboard housing and test all the functionalities.
Reassemble the dashboard carefully.
AMPLIFIER ONLYDETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS
• If your vehicle is equipped with a factory amplifi er you can connect the RCA wiring to the low level outputs of your aftermarket radio, or connect the level matching circuits to the speaker outputs of the aftermarket radio.
• If your aftermarket radio does not have low level outputs, has only a single RCA output, or the RCA output level is 2 volts or less then it is recommended to connect the level matching circuit to the speaker outputs. If the volume does not go loud enough using the RCA connections, the level matching circuits can be used.
• The internal amplifi er in some radios is not compatible with the level matching circuit. In these cases, there will be fl oor noise (hissing or buzzing at low levels) when the level matching circuit is connected. Change to the RCA connections to eliminate this noise.
TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
1
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
chevRolet avalanche without nav 2012-2013
Automotive Data Solutions Inc. © 2015 5
B
C
A FG
C
AB
G
F
CENTERCENTER
SUBSUB
BACKUP CAMBACKUP CAM
1A
E
E
BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED
MAESTRO RR MODULE
MAINHARNESS
RCA CABLES
WIRES FROMVEHICLE
GMS05+ T-HARNESS
FACTORY RADIO HARNESS
SPEAKER
WHITE
OR
WHITE/BLACKGRAYGRAY/BLACKGREENGREEN/BLACK
PURPLE/BLACKPURPLE
STEP 1
STEP 2
STEP 3
STEP 4
SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS
LF SPEAKER
RF SPEAKER
LR SPEAKER
RR SPEAKER
BROWN - MUTE (-)
CONNECT TOAFTERMARKET RADIO
CONNECT TO RADIO WITH LOW LEVEL OUTPUT:
CONNECT TO RADIO WITH HIGH LEVEL OUTPUT:
WIRING DIAGRAM with an Amplifier
STEERING WHEELCONTROL CABLE
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
chevRolet avalanche without nav 2012-2013
Automotive Data Solutions Inc. © 2015 6
BACKUP CAMBACKUP CAM
CENTERCENTER
SUBSUB
B
C
A FG
C
AB
G
F
1B
E
E
STEP 1
BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)
MAINHARNESS
RCA CABLES
WIRES FROMVEHICLE
GMS05+ T-HARNESS
FACTORY RADIO HARNESS
(NOT CONNECTED)
(NOT CONNECTED)
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
STEP 2
STEP 3
STEP 4
SPEAKER
MAESTRO RR MODULE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED
BROWN - MUTE (-)
CONNECT TOAFTERMARKET RADIO
SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS
WIRING DIAGRAM without an Amplifier
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
STEERING WHEELCONTROL CABLE
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SR)-GMS05-AS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro GM5+ Installation Harness
INSTALL GUIDEChEvROLET EQUINOx
2007-2009Retains steeRing wheel contRols, onstaR, bluetooth and moRe!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
chevRolet equinox 2007-2009
Automotive Data Solutions Inc. © 2015 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Before Installing 3
Installation Instructions 4
Wiring Diagram with an Amplifi er 5
Wiring Diagram without an Amplifi er 6
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
chevRolet equinox 2007-2009
Automotive Data Solutions Inc. © 2015 3
BEFORE INSTALLING STEP 1
DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:
METHOD 1: Look for the following logos in the vehicle. They are usually on the speaker covers or on the radio unit. If you fi nd any of the following logos Bose, Pioneer or Monsoon, you have a factory amplifi er.
METHOD 2: Look for the following sticker in the glove box. This sticker will indicate all the Regular Production Option (RPO) codes. If you fi nd any of the following codes UQA, UQS or UQG, you have a factory amplifi er.
STEP 2IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:
Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifi er and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits.
IF YOUR VEHICLE NOT IS EQUIPPED WITH A FACTORY AMPLIFIER:
Follow the installation instructions and complete the installation as shown in the wiring diagram without an amplifi er.
1
SERVICE PARTS IDENTIFICATION DO NOT REMOVE
AGI AG2 AJ1 AL0 AM7 AN3 AU0 AU3 A31 B30 B4UB58 B81 B82 CJ3 C49 C7H DF5 DK7 DL3 DT4 D07EVA E63 FF8 FF9 GT5 G80 JC4 KC4 KNP KUP K34K47 K68 LQ9 M32 NCI NEI NP3 NP5 OSG P30 QSSR4Y R9U R9Z SAF SLM TRB UC6 UK3 UQA U2K UFIUF3 UK3 VR4 VTV VXS V73 XSS X88 YD3 YD6 YE9YSS ZGC ZYI Z60 Z82 ISS ISZ 4IU 6YT 691 6927YT
BC/CC U 8555 692
143 5 FXWH2Q CKI57532GCEK19N031344764
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
chevRolet equinox 2007-2009
Automotive Data Solutions Inc. © 2015 4
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.
STEP 2
• Connect the factory harness to the GM5+ T-harness.
STEP 3• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
STEP 4• Connect all the harnesses to the Maestro RR module then
proceed to module setup.
The module is now ready to be used.
Insert the aftermarket radio in the dashboard housing and test all the functionalities.
Reassemble the dashboard carefully.
AMPLIFIER ONLYDETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS
• If your vehicle is equipped with a factory amplifi er you can connect the RCA wiring to the low level outputs of your aftermarket radio, or connect the level matching circuits to the speaker outputs of the aftermarket radio.
• If your aftermarket radio does not have low level outputs, has only a single RCA output, or the RCA output level is 2 volts or less then it is recommended to connect the level matching circuit to the speaker outputs. If the volume does not go loud enough using the RCA connections, the level matching circuits can be used.
• The internal amplifi er in some radios is not compatible with the level matching circuit. In these cases, there will be fl oor noise (hissing or buzzing at low levels) when the level matching circuit is connected. Change to the RCA connections to eliminate this noise.
TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
1
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
chevRolet equinox 2007-2009
Automotive Data Solutions Inc. © 2015 5
B
C
A FG
C
AB
G
F
CENTERCENTER
SUBSUB
BACKUP CAMBACKUP CAM
1A
E
E
BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED
MAESTRO RR MODULE
MAINHARNESS
RCA CABLES
WIRES FROMVEHICLE
GMS05+ T-HARNESS
FACTORY RADIO HARNESS
SPEAKER
WHITE
OR
WHITE/BLACKGRAYGRAY/BLACKGREENGREEN/BLACK
PURPLE/BLACKPURPLE
STEP 1
STEP 2
STEP 3
STEP 4
SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS
LF SPEAKER
RF SPEAKER
LR SPEAKER
RR SPEAKER
BROWN - MUTE (-)
CONNECT TOAFTERMARKET RADIO
CONNECT TO RADIO WITH LOW LEVEL OUTPUT:
CONNECT TO RADIO WITH HIGH LEVEL OUTPUT:
WIRING DIAGRAM with an Amplifier
STEERING WHEELCONTROL CABLE
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
chevRolet equinox 2007-2009
Automotive Data Solutions Inc. © 2015 6
BACKUP CAMBACKUP CAM
CENTERCENTER
SUBSUB
B
C
A FG
C
AB
G
F
1B
E
E
STEP 1
BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)
MAINHARNESS
RCA CABLES
WIRES FROMVEHICLE
GMS05+ T-HARNESS
FACTORY RADIO HARNESS
(NOT CONNECTED)
(NOT CONNECTED)
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
STEP 2
STEP 3
STEP 4
SPEAKER
MAESTRO RR MODULE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED
BROWN - MUTE (-)
CONNECT TOAFTERMARKET RADIO
SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS
WIRING DIAGRAM without an Amplifier
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
STEERING WHEELCONTROL CABLE
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SR)-GMS05-AS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro GM5+ Installation Harness
INSTALL GUIDEChEvROLET ExPRESS
2008-2014Retains steeRing wheel contRols, onstaR, bluetooth and moRe!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
chevRolet expRess 2008-2014
Automotive Data Solutions Inc. © 2015 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Before Installing 3
Installation Instructions 4
Wiring Diagram with an Amplifi er 5
Wiring Diagram without an Amplifi er 6
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
chevRolet expRess 2008-2014
Automotive Data Solutions Inc. © 2015 3
BEFORE INSTALLING STEP 1
DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:
METHOD 1: Look for the following logos in the vehicle. They are usually on the speaker covers or on the radio unit. If you fi nd any of the following logos Bose, Pioneer or Monsoon, you have a factory amplifi er.
METHOD 2: Look for the following sticker in the glove box. This sticker will indicate all the Regular Production Option (RPO) codes. If you fi nd any of the following codes UQA, UQS or UQG, you have a factory amplifi er.
STEP 2IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:
Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifi er and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits.
IF YOUR VEHICLE NOT IS EQUIPPED WITH A FACTORY AMPLIFIER:
Follow the installation instructions and complete the installation as shown in the wiring diagram without an amplifi er.
1
SERVICE PARTS IDENTIFICATION DO NOT REMOVE
AGI AG2 AJ1 AL0 AM7 AN3 AU0 AU3 A31 B30 B4UB58 B81 B82 CJ3 C49 C7H DF5 DK7 DL3 DT4 D07EVA E63 FF8 FF9 GT5 G80 JC4 KC4 KNP KUP K34K47 K68 LQ9 M32 NCI NEI NP3 NP5 OSG P30 QSSR4Y R9U R9Z SAF SLM TRB UC6 UK3 UQA U2K UFIUF3 UK3 VR4 VTV VXS V73 XSS X88 YD3 YD6 YE9YSS ZGC ZYI Z60 Z82 ISS ISZ 4IU 6YT 691 6927YT
BC/CC U 8555 692
143 5 FXWH2Q CKI57532GCEK19N031344764
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
chevRolet expRess 2008-2014
Automotive Data Solutions Inc. © 2015 4
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.
STEP 2
• Connect the factory harness to the GM5+ T-harness.
STEP 3• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
STEP 4• Connect all the harnesses to the Maestro RR module then
proceed to module setup.
The module is now ready to be used.
Insert the aftermarket radio in the dashboard housing and test all the functionalities.
Reassemble the dashboard carefully.
AMPLIFIER ONLYDETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS
• If your vehicle is equipped with a factory amplifi er you can connect the RCA wiring to the low level outputs of your aftermarket radio, or connect the level matching circuits to the speaker outputs of the aftermarket radio.
• If your aftermarket radio does not have low level outputs, has only a single RCA output, or the RCA output level is 2 volts or less then it is recommended to connect the level matching circuit to the speaker outputs. If the volume does not go loud enough using the RCA connections, the level matching circuits can be used.
• The internal amplifi er in some radios is not compatible with the level matching circuit. In these cases, there will be fl oor noise (hissing or buzzing at low levels) when the level matching circuit is connected. Change to the RCA connections to eliminate this noise.
TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
1
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
chevRolet expRess 2008-2014
Automotive Data Solutions Inc. © 2015 5
B
C
A FG
C
AB
G
F
CENTERCENTER
SUBSUB
BACKUP CAMBACKUP CAM
1A
E
E
BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED
MAESTRO RR MODULE
MAINHARNESS
RCA CABLES
WIRES FROMVEHICLE
GMS05+ T-HARNESS
FACTORY RADIO HARNESS
SPEAKER
WHITE
OR
WHITE/BLACKGRAYGRAY/BLACKGREENGREEN/BLACK
PURPLE/BLACKPURPLE
STEP 1
STEP 2
STEP 3
STEP 4
SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS
LF SPEAKER
RF SPEAKER
LR SPEAKER
RR SPEAKER
BROWN - MUTE (-)
CONNECT TOAFTERMARKET RADIO
CONNECT TO RADIO WITH LOW LEVEL OUTPUT:
CONNECT TO RADIO WITH HIGH LEVEL OUTPUT:
WIRING DIAGRAM with an Amplifier
STEERING WHEELCONTROL CABLE
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
chevRolet expRess 2008-2014
Automotive Data Solutions Inc. © 2015 6
BACKUP CAMBACKUP CAM
CENTERCENTER
SUBSUB
B
C
A FG
C
AB
G
F
1B
E
E
STEP 1
BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)
MAINHARNESS
RCA CABLES
WIRES FROMVEHICLE
GMS05+ T-HARNESS
FACTORY RADIO HARNESS
(NOT CONNECTED)
(NOT CONNECTED)
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
STEP 2
STEP 3
STEP 4
SPEAKER
MAESTRO RR MODULE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED
BROWN - MUTE (-)
CONNECT TOAFTERMARKET RADIO
SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS
WIRING DIAGRAM without an Amplifier
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
STEERING WHEELCONTROL CABLE
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SR)-GMS05-AS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro GM5+ Installation Harness
INSTALL GUIDEChEvROLET IMPALA
2006-2013Retains steeRing wheel contRols, onstaR, bluetooth and moRe!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
chevRolet impala 2006-2013
Automotive Data Solutions Inc. © 2015 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Before Installing 3
Installation Instructions 4
Wiring Diagram with an Amplifi er 5
Wiring Diagram without an Amplifi er 6
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
chevRolet impala 2006-2013
Automotive Data Solutions Inc. © 2015 3
BEFORE INSTALLING STEP 1
DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:
METHOD 1: Look for the following logos in the vehicle. They are usually on the speaker covers or on the radio unit. If you fi nd any of the following logos Bose, Pioneer or Monsoon, you have a factory amplifi er.
METHOD 2: Look for the following sticker in the glove box. This sticker will indicate all the Regular Production Option (RPO) codes. If you fi nd any of the following codes UQA, UQS or UQG, you have a factory amplifi er.
STEP 2IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:
Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifi er and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits.
IF YOUR VEHICLE NOT IS EQUIPPED WITH A FACTORY AMPLIFIER:
Follow the installation instructions and complete the installation as shown in the wiring diagram without an amplifi er.
1
SERVICE PARTS IDENTIFICATION DO NOT REMOVE
AGI AG2 AJ1 AL0 AM7 AN3 AU0 AU3 A31 B30 B4UB58 B81 B82 CJ3 C49 C7H DF5 DK7 DL3 DT4 D07EVA E63 FF8 FF9 GT5 G80 JC4 KC4 KNP KUP K34K47 K68 LQ9 M32 NCI NEI NP3 NP5 OSG P30 QSSR4Y R9U R9Z SAF SLM TRB UC6 UK3 UQA U2K UFIUF3 UK3 VR4 VTV VXS V73 XSS X88 YD3 YD6 YE9YSS ZGC ZYI Z60 Z82 ISS ISZ 4IU 6YT 691 6927YT
BC/CC U 8555 692
143 5 FXWH2Q CKI57532GCEK19N031344764
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
chevRolet impala 2006-2013
Automotive Data Solutions Inc. © 2015 4
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.
STEP 2
• Connect the factory harness to the GM5+ T-harness.
STEP 3• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
STEP 4• Connect all the harnesses to the Maestro RR module then
proceed to module setup.
The module is now ready to be used.
Insert the aftermarket radio in the dashboard housing and test all the functionalities.
Reassemble the dashboard carefully.
AMPLIFIER ONLYDETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS
• If your vehicle is equipped with a factory amplifi er you can connect the RCA wiring to the low level outputs of your aftermarket radio, or connect the level matching circuits to the speaker outputs of the aftermarket radio.
• If your aftermarket radio does not have low level outputs, has only a single RCA output, or the RCA output level is 2 volts or less then it is recommended to connect the level matching circuit to the speaker outputs. If the volume does not go loud enough using the RCA connections, the level matching circuits can be used.
• The internal amplifi er in some radios is not compatible with the level matching circuit. In these cases, there will be fl oor noise (hissing or buzzing at low levels) when the level matching circuit is connected. Change to the RCA connections to eliminate this noise.
TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
1
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
chevRolet impala 2006-2013
Automotive Data Solutions Inc. © 2015 5
B
C
A FG
C
AB
G
F
CENTERCENTER
SUBSUB
BACKUP CAMBACKUP CAM
1A
E
E
BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED
MAESTRO RR MODULE
MAINHARNESS
RCA CABLES
WIRES FROMVEHICLE
GMS05+ T-HARNESS
FACTORY RADIO HARNESS
SPEAKER
WHITE
OR
WHITE/BLACKGRAYGRAY/BLACKGREENGREEN/BLACK
PURPLE/BLACKPURPLE
STEP 1
STEP 2
STEP 3
STEP 4
SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS
LF SPEAKER
RF SPEAKER
LR SPEAKER
RR SPEAKER
BROWN - MUTE (-)
CONNECT TOAFTERMARKET RADIO
CONNECT TO RADIO WITH LOW LEVEL OUTPUT:
CONNECT TO RADIO WITH HIGH LEVEL OUTPUT:
WIRING DIAGRAM with an Amplifier
STEERING WHEELCONTROL CABLE
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
chevRolet impala 2006-2013
Automotive Data Solutions Inc. © 2015 6
BACKUP CAMBACKUP CAM
CENTERCENTER
SUBSUB
B
C
A FG
C
AB
G
F
1B
E
E
STEP 1
BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)
MAINHARNESS
RCA CABLES
WIRES FROMVEHICLE
GMS05+ T-HARNESS
FACTORY RADIO HARNESS
(NOT CONNECTED)
(NOT CONNECTED)
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
STEP 2
STEP 3
STEP 4
SPEAKER
MAESTRO RR MODULE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED
BROWN - MUTE (-)
CONNECT TOAFTERMARKET RADIO
SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS
WIRING DIAGRAM without an Amplifier
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
STEERING WHEELCONTROL CABLE
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SR)-GMS05-AS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro GM5+ Installation Harness
INSTALL GUIDEChEvROLET MONTE CARLO
2006-2007Retains steeRing wheel contRols, onstaR, bluetooth and moRe!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
chevRolet monte caRlo 2006-2007
Automotive Data Solutions Inc. © 2015 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Before Installing 3
Installation Instructions 4
Wiring Diagram with an Amplifi er 5
Wiring Diagram without an Amplifi er 6
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
chevRolet monte caRlo 2006-2007
Automotive Data Solutions Inc. © 2015 3
BEFORE INSTALLING STEP 1
DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:
METHOD 1: Look for the following logos in the vehicle. They are usually on the speaker covers or on the radio unit. If you fi nd any of the following logos Bose, Pioneer or Monsoon, you have a factory amplifi er.
METHOD 2: Look for the following sticker in the glove box. This sticker will indicate all the Regular Production Option (RPO) codes. If you fi nd any of the following codes UQA, UQS or UQG, you have a factory amplifi er.
STEP 2IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:
Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifi er and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits.
IF YOUR VEHICLE NOT IS EQUIPPED WITH A FACTORY AMPLIFIER:
Follow the installation instructions and complete the installation as shown in the wiring diagram without an amplifi er.
1
SERVICE PARTS IDENTIFICATION DO NOT REMOVE
AGI AG2 AJ1 AL0 AM7 AN3 AU0 AU3 A31 B30 B4UB58 B81 B82 CJ3 C49 C7H DF5 DK7 DL3 DT4 D07EVA E63 FF8 FF9 GT5 G80 JC4 KC4 KNP KUP K34K47 K68 LQ9 M32 NCI NEI NP3 NP5 OSG P30 QSSR4Y R9U R9Z SAF SLM TRB UC6 UK3 UQA U2K UFIUF3 UK3 VR4 VTV VXS V73 XSS X88 YD3 YD6 YE9YSS ZGC ZYI Z60 Z82 ISS ISZ 4IU 6YT 691 6927YT
BC/CC U 8555 692
143 5 FXWH2Q CKI57532GCEK19N031344764
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
chevRolet monte caRlo 2006-2007
Automotive Data Solutions Inc. © 2015 4
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.
STEP 2
• Connect the factory harness to the GM5+ T-harness.
STEP 3• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
STEP 4• Connect all the harnesses to the Maestro RR module then
proceed to module setup.
The module is now ready to be used.
Insert the aftermarket radio in the dashboard housing and test all the functionalities.
Reassemble the dashboard carefully.
AMPLIFIER ONLYDETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS
• If your vehicle is equipped with a factory amplifi er you can connect the RCA wiring to the low level outputs of your aftermarket radio, or connect the level matching circuits to the speaker outputs of the aftermarket radio.
• If your aftermarket radio does not have low level outputs, has only a single RCA output, or the RCA output level is 2 volts or less then it is recommended to connect the level matching circuit to the speaker outputs. If the volume does not go loud enough using the RCA connections, the level matching circuits can be used.
• The internal amplifi er in some radios is not compatible with the level matching circuit. In these cases, there will be fl oor noise (hissing or buzzing at low levels) when the level matching circuit is connected. Change to the RCA connections to eliminate this noise.
TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
1
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
chevRolet monte caRlo 2006-2007
Automotive Data Solutions Inc. © 2015 5
B
C
A FG
C
AB
G
F
CENTERCENTER
SUBSUB
BACKUP CAMBACKUP CAM
1A
E
E
BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED
MAESTRO RR MODULE
MAINHARNESS
RCA CABLES
WIRES FROMVEHICLE
GMS05+ T-HARNESS
FACTORY RADIO HARNESS
SPEAKER
WHITE
OR
WHITE/BLACKGRAYGRAY/BLACKGREENGREEN/BLACK
PURPLE/BLACKPURPLE
STEP 1
STEP 2
STEP 3
STEP 4
SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS
LF SPEAKER
RF SPEAKER
LR SPEAKER
RR SPEAKER
BROWN - MUTE (-)
CONNECT TOAFTERMARKET RADIO
CONNECT TO RADIO WITH LOW LEVEL OUTPUT:
CONNECT TO RADIO WITH HIGH LEVEL OUTPUT:
WIRING DIAGRAM with an Amplifier
STEERING WHEELCONTROL CABLE
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
chevRolet monte caRlo 2006-2007
Automotive Data Solutions Inc. © 2015 6
BACKUP CAMBACKUP CAM
CENTERCENTER
SUBSUB
B
C
A FG
C
AB
G
F
1B
E
E
STEP 1
BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)
MAINHARNESS
RCA CABLES
WIRES FROMVEHICLE
GMS05+ T-HARNESS
FACTORY RADIO HARNESS
(NOT CONNECTED)
(NOT CONNECTED)
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
STEP 2
STEP 3
STEP 4
SPEAKER
MAESTRO RR MODULE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED
BROWN - MUTE (-)
CONNECT TOAFTERMARKET RADIO
SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS
WIRING DIAGRAM without an Amplifier
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
STEERING WHEELCONTROL CABLE
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SR)-GMS05-AS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro GM5+ Installation Harness
INSTALL GUIDEChEvROLET SILvERADO 1500
2007-2011Retains steeRing wheel contRols, onstaR, bluetooth and moRe!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
chevRolet silveRado 1500 2007-2011
Automotive Data Solutions Inc. © 2015 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Before Installing 3
Installation Instructions 4
Wiring Diagram with an Amplifi er 5
Wiring Diagram without an Amplifi er 6
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
chevRolet silveRado 1500 2007-2011
Automotive Data Solutions Inc. © 2015 3
BEFORE INSTALLING STEP 1
DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:
METHOD 1: Look for the following logos in the vehicle. They are usually on the speaker covers or on the radio unit. If you fi nd any of the following logos Bose, Pioneer or Monsoon, you have a factory amplifi er.
METHOD 2: Look for the following sticker in the glove box. This sticker will indicate all the Regular Production Option (RPO) codes. If you fi nd any of the following codes UQA, UQS or UQG, you have a factory amplifi er.
STEP 2IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:
Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifi er and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits.
IF YOUR VEHICLE NOT IS EQUIPPED WITH A FACTORY AMPLIFIER:
Follow the installation instructions and complete the installation as shown in the wiring diagram without an amplifi er.
1
SERVICE PARTS IDENTIFICATION DO NOT REMOVE
AGI AG2 AJ1 AL0 AM7 AN3 AU0 AU3 A31 B30 B4UB58 B81 B82 CJ3 C49 C7H DF5 DK7 DL3 DT4 D07EVA E63 FF8 FF9 GT5 G80 JC4 KC4 KNP KUP K34K47 K68 LQ9 M32 NCI NEI NP3 NP5 OSG P30 QSSR4Y R9U R9Z SAF SLM TRB UC6 UK3 UQA U2K UFIUF3 UK3 VR4 VTV VXS V73 XSS X88 YD3 YD6 YE9YSS ZGC ZYI Z60 Z82 ISS ISZ 4IU 6YT 691 6927YT
BC/CC U 8555 692
143 5 FXWH2Q CKI57532GCEK19N031344764
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
chevRolet silveRado 1500 2007-2011
Automotive Data Solutions Inc. © 2015 4
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.
STEP 2
• Connect the factory harness to the GM5+ T-harness.
STEP 3• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
STEP 4• Connect all the harnesses to the Maestro RR module then
proceed to module setup.
The module is now ready to be used.
Insert the aftermarket radio in the dashboard housing and test all the functionalities.
Reassemble the dashboard carefully.
AMPLIFIER ONLYDETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS
• If your vehicle is equipped with a factory amplifi er you can connect the RCA wiring to the low level outputs of your aftermarket radio, or connect the level matching circuits to the speaker outputs of the aftermarket radio.
• If your aftermarket radio does not have low level outputs, has only a single RCA output, or the RCA output level is 2 volts or less then it is recommended to connect the level matching circuit to the speaker outputs. If the volume does not go loud enough using the RCA connections, the level matching circuits can be used.
• The internal amplifi er in some radios is not compatible with the level matching circuit. In these cases, there will be fl oor noise (hissing or buzzing at low levels) when the level matching circuit is connected. Change to the RCA connections to eliminate this noise.
TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
1
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
chevRolet silveRado 1500 2007-2011
Automotive Data Solutions Inc. © 2015 5
B
C
A FG
C
AB
G
F
CENTERCENTER
SUBSUB
BACKUP CAMBACKUP CAM
1A
E
E
BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED
MAESTRO RR MODULE
MAINHARNESS
RCA CABLES
WIRES FROMVEHICLE
GMS05+ T-HARNESS
FACTORY RADIO HARNESS
SPEAKER
WHITE
OR
WHITE/BLACKGRAYGRAY/BLACKGREENGREEN/BLACK
PURPLE/BLACKPURPLE
STEP 1
STEP 2
STEP 3
STEP 4
SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS
LF SPEAKER
RF SPEAKER
LR SPEAKER
RR SPEAKER
BROWN - MUTE (-)
CONNECT TOAFTERMARKET RADIO
CONNECT TO RADIO WITH LOW LEVEL OUTPUT:
CONNECT TO RADIO WITH HIGH LEVEL OUTPUT:
WIRING DIAGRAM with an Amplifier
STEERING WHEELCONTROL CABLE
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
chevRolet silveRado 1500 2007-2011
Automotive Data Solutions Inc. © 2015 6
BACKUP CAMBACKUP CAM
CENTERCENTER
SUBSUB
B
C
A FG
C
AB
G
F
1B
E
E
STEP 1
BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)
MAINHARNESS
RCA CABLES
WIRES FROMVEHICLE
GMS05+ T-HARNESS
FACTORY RADIO HARNESS
(NOT CONNECTED)
(NOT CONNECTED)
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
STEP 2
STEP 3
STEP 4
SPEAKER
MAESTRO RR MODULE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED
BROWN - MUTE (-)
CONNECT TOAFTERMARKET RADIO
SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS
WIRING DIAGRAM without an Amplifier
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
STEERING WHEELCONTROL CABLE
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SR)-GMS05-AS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro GM5+ Installation Harness
INSTALL GUIDEChEvROLET SILvERADO 1500
WIThOUT NAv 2012-2013Retains steeRing wheel contRols, onstaR, bluetooth and moRe!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
chevRolet silveRado 1500 without nav 2012-2013
Automotive Data Solutions Inc. © 2015 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Before Installing 3
Installation Instructions 4
Wiring Diagram with an Amplifi er 5
Wiring Diagram without an Amplifi er 6
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
chevRolet silveRado 1500 without nav 2012-2013
Automotive Data Solutions Inc. © 2015 3
BEFORE INSTALLING STEP 1
DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:
METHOD 1: Look for the following logos in the vehicle. They are usually on the speaker covers or on the radio unit. If you fi nd any of the following logos Bose, Pioneer or Monsoon, you have a factory amplifi er.
METHOD 2: Look for the following sticker in the glove box. This sticker will indicate all the Regular Production Option (RPO) codes. If you fi nd any of the following codes UQA, UQS or UQG, you have a factory amplifi er.
STEP 2IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:
Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifi er and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits.
IF YOUR VEHICLE NOT IS EQUIPPED WITH A FACTORY AMPLIFIER:
Follow the installation instructions and complete the installation as shown in the wiring diagram without an amplifi er.
1
SERVICE PARTS IDENTIFICATION DO NOT REMOVE
AGI AG2 AJ1 AL0 AM7 AN3 AU0 AU3 A31 B30 B4UB58 B81 B82 CJ3 C49 C7H DF5 DK7 DL3 DT4 D07EVA E63 FF8 FF9 GT5 G80 JC4 KC4 KNP KUP K34K47 K68 LQ9 M32 NCI NEI NP3 NP5 OSG P30 QSSR4Y R9U R9Z SAF SLM TRB UC6 UK3 UQA U2K UFIUF3 UK3 VR4 VTV VXS V73 XSS X88 YD3 YD6 YE9YSS ZGC ZYI Z60 Z82 ISS ISZ 4IU 6YT 691 6927YT
BC/CC U 8555 692
143 5 FXWH2Q CKI57532GCEK19N031344764
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
chevRolet silveRado 1500 without nav 2012-2013
Automotive Data Solutions Inc. © 2015 4
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.
STEP 2
• Connect the factory harness to the GM5+ T-harness.
STEP 3• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
STEP 4• Connect all the harnesses to the Maestro RR module then
proceed to module setup.
The module is now ready to be used.
Insert the aftermarket radio in the dashboard housing and test all the functionalities.
Reassemble the dashboard carefully.
AMPLIFIER ONLYDETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS
• If your vehicle is equipped with a factory amplifi er you can connect the RCA wiring to the low level outputs of your aftermarket radio, or connect the level matching circuits to the speaker outputs of the aftermarket radio.
• If your aftermarket radio does not have low level outputs, has only a single RCA output, or the RCA output level is 2 volts or less then it is recommended to connect the level matching circuit to the speaker outputs. If the volume does not go loud enough using the RCA connections, the level matching circuits can be used.
• The internal amplifi er in some radios is not compatible with the level matching circuit. In these cases, there will be fl oor noise (hissing or buzzing at low levels) when the level matching circuit is connected. Change to the RCA connections to eliminate this noise.
TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
1
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
chevRolet silveRado 1500 without nav 2012-2013
Automotive Data Solutions Inc. © 2015 5
B
C
A FG
C
AB
G
F
CENTERCENTER
SUBSUB
BACKUP CAMBACKUP CAM
1A
E
E
BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED
MAESTRO RR MODULE
MAINHARNESS
RCA CABLES
WIRES FROMVEHICLE
GMS05+ T-HARNESS
FACTORY RADIO HARNESS
SPEAKER
WHITE
OR
WHITE/BLACKGRAYGRAY/BLACKGREENGREEN/BLACK
PURPLE/BLACKPURPLE
STEP 1
STEP 2
STEP 3
STEP 4
SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS
LF SPEAKER
RF SPEAKER
LR SPEAKER
RR SPEAKER
BROWN - MUTE (-)
CONNECT TOAFTERMARKET RADIO
CONNECT TO RADIO WITH LOW LEVEL OUTPUT:
CONNECT TO RADIO WITH HIGH LEVEL OUTPUT:
WIRING DIAGRAM with an Amplifier
STEERING WHEELCONTROL CABLE
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
chevRolet silveRado 1500 without nav 2012-2013
Automotive Data Solutions Inc. © 2015 6
BACKUP CAMBACKUP CAM
CENTERCENTER
SUBSUB
B
C
A FG
C
AB
G
F
1B
E
E
STEP 1
BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)
MAINHARNESS
RCA CABLES
WIRES FROMVEHICLE
GMS05+ T-HARNESS
FACTORY RADIO HARNESS
(NOT CONNECTED)
(NOT CONNECTED)
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
STEP 2
STEP 3
STEP 4
SPEAKER
MAESTRO RR MODULE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED
BROWN - MUTE (-)
CONNECT TOAFTERMARKET RADIO
SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS
WIRING DIAGRAM without an Amplifier
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
STEERING WHEELCONTROL CABLE
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SR)-GMS05-AS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro GM5+ Installation Harness
INSTALL GUIDEChEvROLET
SILvERADO 2500 & 3500 2007-2011
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
chevRolet silveRado 2500 & 3500 2007-2011
Automotive Data Solutions Inc. © 2015 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Before Installing 3
Installation Instructions 4
Wiring Diagram with an Amplifi er 5
Wiring Diagram without an Amplifi er 6
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
chevRolet silveRado 2500 & 3500 2007-2011
Automotive Data Solutions Inc. © 2015 3
BEFORE INSTALLING STEP 1
DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:
METHOD 1: Look for the following logos in the vehicle. They are usually on the speaker covers or on the radio unit. If you fi nd any of the following logos Bose, Pioneer or Monsoon, you have a factory amplifi er.
METHOD 2: Look for the following sticker in the glove box. This sticker will indicate all the Regular Production Option (RPO) codes. If you fi nd any of the following codes UQA, UQS or UQG, you have a factory amplifi er.
STEP 2IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:
Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifi er and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits.
IF YOUR VEHICLE NOT IS EQUIPPED WITH A FACTORY AMPLIFIER:
Follow the installation instructions and complete the installation as shown in the wiring diagram without an amplifi er.
1
SERVICE PARTS IDENTIFICATION DO NOT REMOVE
AGI AG2 AJ1 AL0 AM7 AN3 AU0 AU3 A31 B30 B4UB58 B81 B82 CJ3 C49 C7H DF5 DK7 DL3 DT4 D07EVA E63 FF8 FF9 GT5 G80 JC4 KC4 KNP KUP K34K47 K68 LQ9 M32 NCI NEI NP3 NP5 OSG P30 QSSR4Y R9U R9Z SAF SLM TRB UC6 UK3 UQA U2K UFIUF3 UK3 VR4 VTV VXS V73 XSS X88 YD3 YD6 YE9YSS ZGC ZYI Z60 Z82 ISS ISZ 4IU 6YT 691 6927YT
BC/CC U 8555 692
143 5 FXWH2Q CKI57532GCEK19N031344764
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
chevRolet silveRado 2500 & 3500 2007-2011
Automotive Data Solutions Inc. © 2015 4
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.
STEP 2
• Connect the factory harness to the GM5+ T-harness.
STEP 3• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
STEP 4• Connect all the harnesses to the Maestro RR module then
proceed to module setup.
The module is now ready to be used.
Insert the aftermarket radio in the dashboard housing and test all the functionalities.
Reassemble the dashboard carefully.
AMPLIFIER ONLYDETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS
• If your vehicle is equipped with a factory amplifi er you can connect the RCA wiring to the low level outputs of your aftermarket radio, or connect the level matching circuits to the speaker outputs of the aftermarket radio.
• If your aftermarket radio does not have low level outputs, has only a single RCA output, or the RCA output level is 2 volts or less then it is recommended to connect the level matching circuit to the speaker outputs. If the volume does not go loud enough using the RCA connections, the level matching circuits can be used.
• The internal amplifi er in some radios is not compatible with the level matching circuit. In these cases, there will be fl oor noise (hissing or buzzing at low levels) when the level matching circuit is connected. Change to the RCA connections to eliminate this noise.
TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
1
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
chevRolet silveRado 2500 & 3500 2007-2011
Automotive Data Solutions Inc. © 2015 5
B
C
A FG
C
AB
G
F
CENTERCENTER
SUBSUB
BACKUP CAMBACKUP CAM
1A
E
E
BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED
MAESTRO RR MODULE
MAINHARNESS
RCA CABLES
WIRES FROMVEHICLE
GMS05+ T-HARNESS
FACTORY RADIO HARNESS
SPEAKER
WHITE
OR
WHITE/BLACKGRAYGRAY/BLACKGREENGREEN/BLACK
PURPLE/BLACKPURPLE
STEP 1
STEP 2
STEP 3
STEP 4
SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS
LF SPEAKER
RF SPEAKER
LR SPEAKER
RR SPEAKER
BROWN - MUTE (-)
CONNECT TOAFTERMARKET RADIO
CONNECT TO RADIO WITH LOW LEVEL OUTPUT:
CONNECT TO RADIO WITH HIGH LEVEL OUTPUT:
WIRING DIAGRAM with an Amplifier
STEERING WHEELCONTROL CABLE
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
chevRolet silveRado 2500 & 3500 2007-2011
Automotive Data Solutions Inc. © 2015 6
BACKUP CAMBACKUP CAM
CENTERCENTER
SUBSUB
B
C
A FG
C
AB
G
F
1B
E
E
STEP 1
BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)
MAINHARNESS
RCA CABLES
WIRES FROMVEHICLE
GMS05+ T-HARNESS
FACTORY RADIO HARNESS
(NOT CONNECTED)
(NOT CONNECTED)
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
STEP 2
STEP 3
STEP 4
SPEAKER
MAESTRO RR MODULE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED
BROWN - MUTE (-)
CONNECT TOAFTERMARKET RADIO
SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS
WIRING DIAGRAM without an Amplifier
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
STEERING WHEELCONTROL CABLE
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SR)-GMS05-AS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro GM5+ Installation Harness
INSTALL GUIDEChEvROLET
SILvERADO 2500 & 3500WIThOUT NAv 2012-2014
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
chevRolet silveRado 2500 & 3500 without nav 2012-2014
Automotive Data Solutions Inc. © 2015 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Before Installing 3
Installation Instructions 4
Wiring Diagram with an Amplifi er 5
Wiring Diagram without an Amplifi er 6
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
chevRolet silveRado 2500 & 3500 without nav 2012-2014
Automotive Data Solutions Inc. © 2015 3
BEFORE INSTALLING STEP 1
DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:
METHOD 1: Look for the following logos in the vehicle. They are usually on the speaker covers or on the radio unit. If you fi nd any of the following logos Bose, Pioneer or Monsoon, you have a factory amplifi er.
METHOD 2: Look for the following sticker in the glove box. This sticker will indicate all the Regular Production Option (RPO) codes. If you fi nd any of the following codes UQA, UQS or UQG, you have a factory amplifi er.
STEP 2IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:
Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifi er and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits.
IF YOUR VEHICLE NOT IS EQUIPPED WITH A FACTORY AMPLIFIER:
Follow the installation instructions and complete the installation as shown in the wiring diagram without an amplifi er.
1
SERVICE PARTS IDENTIFICATION DO NOT REMOVE
AGI AG2 AJ1 AL0 AM7 AN3 AU0 AU3 A31 B30 B4UB58 B81 B82 CJ3 C49 C7H DF5 DK7 DL3 DT4 D07EVA E63 FF8 FF9 GT5 G80 JC4 KC4 KNP KUP K34K47 K68 LQ9 M32 NCI NEI NP3 NP5 OSG P30 QSSR4Y R9U R9Z SAF SLM TRB UC6 UK3 UQA U2K UFIUF3 UK3 VR4 VTV VXS V73 XSS X88 YD3 YD6 YE9YSS ZGC ZYI Z60 Z82 ISS ISZ 4IU 6YT 691 6927YT
BC/CC U 8555 692
143 5 FXWH2Q CKI57532GCEK19N031344764
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
chevRolet silveRado 2500 & 3500 without nav 2012-2014
Automotive Data Solutions Inc. © 2015 4
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.
STEP 2
• Connect the factory harness to the GM5+ T-harness.
STEP 3• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
STEP 4• Connect all the harnesses to the Maestro RR module then
proceed to module setup.
The module is now ready to be used.
Insert the aftermarket radio in the dashboard housing and test all the functionalities.
Reassemble the dashboard carefully.
AMPLIFIER ONLYDETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS
• If your vehicle is equipped with a factory amplifi er you can connect the RCA wiring to the low level outputs of your aftermarket radio, or connect the level matching circuits to the speaker outputs of the aftermarket radio.
• If your aftermarket radio does not have low level outputs, has only a single RCA output, or the RCA output level is 2 volts or less then it is recommended to connect the level matching circuit to the speaker outputs. If the volume does not go loud enough using the RCA connections, the level matching circuits can be used.
• The internal amplifi er in some radios is not compatible with the level matching circuit. In these cases, there will be fl oor noise (hissing or buzzing at low levels) when the level matching circuit is connected. Change to the RCA connections to eliminate this noise.
TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
1
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
chevRolet silveRado 2500 & 3500 without nav 2012-2014
Automotive Data Solutions Inc. © 2015 5
B
C
A FG
C
AB
G
F
CENTERCENTER
SUBSUB
BACKUP CAMBACKUP CAM
1A
E
E
BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED
MAESTRO RR MODULE
MAINHARNESS
RCA CABLES
WIRES FROMVEHICLE
GMS05+ T-HARNESS
FACTORY RADIO HARNESS
SPEAKER
WHITE
OR
WHITE/BLACKGRAYGRAY/BLACKGREENGREEN/BLACK
PURPLE/BLACKPURPLE
STEP 1
STEP 2
STEP 3
STEP 4
SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS
LF SPEAKER
RF SPEAKER
LR SPEAKER
RR SPEAKER
BROWN - MUTE (-)
CONNECT TOAFTERMARKET RADIO
CONNECT TO RADIO WITH LOW LEVEL OUTPUT:
CONNECT TO RADIO WITH HIGH LEVEL OUTPUT:
WIRING DIAGRAM with an Amplifier
STEERING WHEELCONTROL CABLE
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
chevRolet silveRado 2500 & 3500 without nav 2012-2014
Automotive Data Solutions Inc. © 2015 6
BACKUP CAMBACKUP CAM
CENTERCENTER
SUBSUB
B
C
A FG
C
AB
G
F
1B
E
E
STEP 1
BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)
MAINHARNESS
RCA CABLES
WIRES FROMVEHICLE
GMS05+ T-HARNESS
FACTORY RADIO HARNESS
(NOT CONNECTED)
(NOT CONNECTED)
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
STEP 2
STEP 3
STEP 4
SPEAKER
MAESTRO RR MODULE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED
BROWN - MUTE (-)
CONNECT TOAFTERMARKET RADIO
SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS
WIRING DIAGRAM without an Amplifier
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
STEERING WHEELCONTROL CABLE
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SR)-GMS05-AS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro GM5+ Installation Harness
INSTALL GUIDEChEvROLET SUBURBAN
2007-2011Retains steeRing wheel contRols, onstaR, bluetooth and moRe!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
chevRolet subuRban 2007-2011
Automotive Data Solutions Inc. © 2015 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Before Installing 3
Installation Instructions 4
Wiring Diagram with an Amplifi er 5
Wiring Diagram without an Amplifi er 6
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
chevRolet subuRban 2007-2011
Automotive Data Solutions Inc. © 2015 3
BEFORE INSTALLING STEP 1
DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:
METHOD 1: Look for the following logos in the vehicle. They are usually on the speaker covers or on the radio unit. If you fi nd any of the following logos Bose, Pioneer or Monsoon, you have a factory amplifi er.
METHOD 2: Look for the following sticker in the glove box. This sticker will indicate all the Regular Production Option (RPO) codes. If you fi nd any of the following codes UQA, UQS or UQG, you have a factory amplifi er.
STEP 2IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:
Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifi er and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits.
IF YOUR VEHICLE NOT IS EQUIPPED WITH A FACTORY AMPLIFIER:
Follow the installation instructions and complete the installation as shown in the wiring diagram without an amplifi er.
1
SERVICE PARTS IDENTIFICATION DO NOT REMOVE
AGI AG2 AJ1 AL0 AM7 AN3 AU0 AU3 A31 B30 B4UB58 B81 B82 CJ3 C49 C7H DF5 DK7 DL3 DT4 D07EVA E63 FF8 FF9 GT5 G80 JC4 KC4 KNP KUP K34K47 K68 LQ9 M32 NCI NEI NP3 NP5 OSG P30 QSSR4Y R9U R9Z SAF SLM TRB UC6 UK3 UQA U2K UFIUF3 UK3 VR4 VTV VXS V73 XSS X88 YD3 YD6 YE9YSS ZGC ZYI Z60 Z82 ISS ISZ 4IU 6YT 691 6927YT
BC/CC U 8555 692
143 5 FXWH2Q CKI57532GCEK19N031344764
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
chevRolet subuRban 2007-2011
Automotive Data Solutions Inc. © 2015 4
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.
STEP 2
• Connect the factory harness to the GM5+ T-harness.
STEP 3• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
STEP 4• Connect all the harnesses to the Maestro RR module then
proceed to module setup.
The module is now ready to be used.
Insert the aftermarket radio in the dashboard housing and test all the functionalities.
Reassemble the dashboard carefully.
AMPLIFIER ONLYDETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS
• If your vehicle is equipped with a factory amplifi er you can connect the RCA wiring to the low level outputs of your aftermarket radio, or connect the level matching circuits to the speaker outputs of the aftermarket radio.
• If your aftermarket radio does not have low level outputs, has only a single RCA output, or the RCA output level is 2 volts or less then it is recommended to connect the level matching circuit to the speaker outputs. If the volume does not go loud enough using the RCA connections, the level matching circuits can be used.
• The internal amplifi er in some radios is not compatible with the level matching circuit. In these cases, there will be fl oor noise (hissing or buzzing at low levels) when the level matching circuit is connected. Change to the RCA connections to eliminate this noise.
TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
1
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
chevRolet subuRban 2007-2011
Automotive Data Solutions Inc. © 2015 5
B
C
A FG
C
AB
G
F
CENTERCENTER
SUBSUB
BACKUP CAMBACKUP CAM
1A
E
E
BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED
MAESTRO RR MODULE
MAINHARNESS
RCA CABLES
WIRES FROMVEHICLE
GMS05+ T-HARNESS
FACTORY RADIO HARNESS
SPEAKER
WHITE
OR
WHITE/BLACKGRAYGRAY/BLACKGREENGREEN/BLACK
PURPLE/BLACKPURPLE
STEP 1
STEP 2
STEP 3
STEP 4
SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS
LF SPEAKER
RF SPEAKER
LR SPEAKER
RR SPEAKER
BROWN - MUTE (-)
CONNECT TOAFTERMARKET RADIO
CONNECT TO RADIO WITH LOW LEVEL OUTPUT:
CONNECT TO RADIO WITH HIGH LEVEL OUTPUT:
WIRING DIAGRAM with an Amplifier
STEERING WHEELCONTROL CABLE
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
chevRolet subuRban 2007-2011
Automotive Data Solutions Inc. © 2015 6
BACKUP CAMBACKUP CAM
CENTERCENTER
SUBSUB
B
C
A FG
C
AB
G
F
1B
E
E
STEP 1
BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)
MAINHARNESS
RCA CABLES
WIRES FROMVEHICLE
GMS05+ T-HARNESS
FACTORY RADIO HARNESS
(NOT CONNECTED)
(NOT CONNECTED)
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
STEP 2
STEP 3
STEP 4
SPEAKER
MAESTRO RR MODULE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED
BROWN - MUTE (-)
CONNECT TOAFTERMARKET RADIO
SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS
WIRING DIAGRAM without an Amplifier
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
STEERING WHEELCONTROL CABLE
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SR)-GMS05-AS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro GM5+ Installation Harness
INSTALL GUIDEChEvROLET SUBURBAN
WIThOUT NAv 2012-2014Retains steeRing wheel contRols, onstaR, bluetooth and moRe!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
chevRolet subuRban without nav 2012-2014
Automotive Data Solutions Inc. © 2015 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Before Installing 3
Installation Instructions 4
Wiring Diagram with an Amplifi er 5
Wiring Diagram without an Amplifi er 6
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
chevRolet subuRban without nav 2012-2014
Automotive Data Solutions Inc. © 2015 3
BEFORE INSTALLING STEP 1
DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:
METHOD 1: Look for the following logos in the vehicle. They are usually on the speaker covers or on the radio unit. If you fi nd any of the following logos Bose, Pioneer or Monsoon, you have a factory amplifi er.
METHOD 2: Look for the following sticker in the glove box. This sticker will indicate all the Regular Production Option (RPO) codes. If you fi nd any of the following codes UQA, UQS or UQG, you have a factory amplifi er.
STEP 2IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:
Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifi er and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits.
IF YOUR VEHICLE NOT IS EQUIPPED WITH A FACTORY AMPLIFIER:
Follow the installation instructions and complete the installation as shown in the wiring diagram without an amplifi er.
1
SERVICE PARTS IDENTIFICATION DO NOT REMOVE
AGI AG2 AJ1 AL0 AM7 AN3 AU0 AU3 A31 B30 B4UB58 B81 B82 CJ3 C49 C7H DF5 DK7 DL3 DT4 D07EVA E63 FF8 FF9 GT5 G80 JC4 KC4 KNP KUP K34K47 K68 LQ9 M32 NCI NEI NP3 NP5 OSG P30 QSSR4Y R9U R9Z SAF SLM TRB UC6 UK3 UQA U2K UFIUF3 UK3 VR4 VTV VXS V73 XSS X88 YD3 YD6 YE9YSS ZGC ZYI Z60 Z82 ISS ISZ 4IU 6YT 691 6927YT
BC/CC U 8555 692
143 5 FXWH2Q CKI57532GCEK19N031344764
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
chevRolet subuRban without nav 2012-2014
Automotive Data Solutions Inc. © 2015 4
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.
STEP 2
• Connect the factory harness to the GM5+ T-harness.
STEP 3• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
STEP 4• Connect all the harnesses to the Maestro RR module then
proceed to module setup.
The module is now ready to be used.
Insert the aftermarket radio in the dashboard housing and test all the functionalities.
Reassemble the dashboard carefully.
AMPLIFIER ONLYDETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS
• If your vehicle is equipped with a factory amplifi er you can connect the RCA wiring to the low level outputs of your aftermarket radio, or connect the level matching circuits to the speaker outputs of the aftermarket radio.
• If your aftermarket radio does not have low level outputs, has only a single RCA output, or the RCA output level is 2 volts or less then it is recommended to connect the level matching circuit to the speaker outputs. If the volume does not go loud enough using the RCA connections, the level matching circuits can be used.
• The internal amplifi er in some radios is not compatible with the level matching circuit. In these cases, there will be fl oor noise (hissing or buzzing at low levels) when the level matching circuit is connected. Change to the RCA connections to eliminate this noise.
TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
1
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
chevRolet subuRban without nav 2012-2014
Automotive Data Solutions Inc. © 2015 5
B
C
A FG
C
AB
G
F
CENTERCENTER
SUBSUB
BACKUP CAMBACKUP CAM
1A
E
E
BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED
MAESTRO RR MODULE
MAINHARNESS
RCA CABLES
WIRES FROMVEHICLE
GMS05+ T-HARNESS
FACTORY RADIO HARNESS
SPEAKER
WHITE
OR
WHITE/BLACKGRAYGRAY/BLACKGREENGREEN/BLACK
PURPLE/BLACKPURPLE
STEP 1
STEP 2
STEP 3
STEP 4
SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS
LF SPEAKER
RF SPEAKER
LR SPEAKER
RR SPEAKER
BROWN - MUTE (-)
CONNECT TOAFTERMARKET RADIO
CONNECT TO RADIO WITH LOW LEVEL OUTPUT:
CONNECT TO RADIO WITH HIGH LEVEL OUTPUT:
WIRING DIAGRAM with an Amplifier
STEERING WHEELCONTROL CABLE
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
chevRolet subuRban without nav 2012-2014
Automotive Data Solutions Inc. © 2015 6
BACKUP CAMBACKUP CAM
CENTERCENTER
SUBSUB
B
C
A FG
C
AB
G
F
1B
E
E
STEP 1
BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)
MAINHARNESS
RCA CABLES
WIRES FROMVEHICLE
GMS05+ T-HARNESS
FACTORY RADIO HARNESS
(NOT CONNECTED)
(NOT CONNECTED)
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
STEP 2
STEP 3
STEP 4
SPEAKER
MAESTRO RR MODULE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED
BROWN - MUTE (-)
CONNECT TOAFTERMARKET RADIO
SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS
WIRING DIAGRAM without an Amplifier
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
STEERING WHEELCONTROL CABLE
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SR)-GMS05-AS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro GM5+ Installation Harness
INSTALL GUIDEChEvROLET TAhOE
2007-2011Retains steeRing wheel contRols, onstaR, bluetooth and moRe!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
chevRolet tahoe 2007-2011
Automotive Data Solutions Inc. © 2015 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Before Installing 3
Installation Instructions 4
Wiring Diagram with an Amplifi er 5
Wiring Diagram without an Amplifi er 6
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
chevRolet tahoe 2007-2011
Automotive Data Solutions Inc. © 2015 3
BEFORE INSTALLING STEP 1
DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:
METHOD 1: Look for the following logos in the vehicle. They are usually on the speaker covers or on the radio unit. If you fi nd any of the following logos Bose, Pioneer or Monsoon, you have a factory amplifi er.
METHOD 2: Look for the following sticker in the glove box. This sticker will indicate all the Regular Production Option (RPO) codes. If you fi nd any of the following codes UQA, UQS or UQG, you have a factory amplifi er.
STEP 2IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:
Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifi er and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits.
IF YOUR VEHICLE NOT IS EQUIPPED WITH A FACTORY AMPLIFIER:
Follow the installation instructions and complete the installation as shown in the wiring diagram without an amplifi er.
1
SERVICE PARTS IDENTIFICATION DO NOT REMOVE
AGI AG2 AJ1 AL0 AM7 AN3 AU0 AU3 A31 B30 B4UB58 B81 B82 CJ3 C49 C7H DF5 DK7 DL3 DT4 D07EVA E63 FF8 FF9 GT5 G80 JC4 KC4 KNP KUP K34K47 K68 LQ9 M32 NCI NEI NP3 NP5 OSG P30 QSSR4Y R9U R9Z SAF SLM TRB UC6 UK3 UQA U2K UFIUF3 UK3 VR4 VTV VXS V73 XSS X88 YD3 YD6 YE9YSS ZGC ZYI Z60 Z82 ISS ISZ 4IU 6YT 691 6927YT
BC/CC U 8555 692
143 5 FXWH2Q CKI57532GCEK19N031344764
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
chevRolet tahoe 2007-2011
Automotive Data Solutions Inc. © 2015 4
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.
STEP 2
• Connect the factory harness to the GM5+ T-harness.
STEP 3• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
STEP 4• Connect all the harnesses to the Maestro RR module then
proceed to module setup.
The module is now ready to be used.
Insert the aftermarket radio in the dashboard housing and test all the functionalities.
Reassemble the dashboard carefully.
AMPLIFIER ONLYDETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS
• If your vehicle is equipped with a factory amplifi er you can connect the RCA wiring to the low level outputs of your aftermarket radio, or connect the level matching circuits to the speaker outputs of the aftermarket radio.
• If your aftermarket radio does not have low level outputs, has only a single RCA output, or the RCA output level is 2 volts or less then it is recommended to connect the level matching circuit to the speaker outputs. If the volume does not go loud enough using the RCA connections, the level matching circuits can be used.
• The internal amplifi er in some radios is not compatible with the level matching circuit. In these cases, there will be fl oor noise (hissing or buzzing at low levels) when the level matching circuit is connected. Change to the RCA connections to eliminate this noise.
TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
1
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
chevRolet tahoe 2007-2011
Automotive Data Solutions Inc. © 2015 5
B
C
A FG
C
AB
G
F
CENTERCENTER
SUBSUB
BACKUP CAMBACKUP CAM
1A
E
E
BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED
MAESTRO RR MODULE
MAINHARNESS
RCA CABLES
WIRES FROMVEHICLE
GMS05+ T-HARNESS
FACTORY RADIO HARNESS
SPEAKER
WHITE
OR
WHITE/BLACKGRAYGRAY/BLACKGREENGREEN/BLACK
PURPLE/BLACKPURPLE
STEP 1
STEP 2
STEP 3
STEP 4
SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS
LF SPEAKER
RF SPEAKER
LR SPEAKER
RR SPEAKER
BROWN - MUTE (-)
CONNECT TOAFTERMARKET RADIO
CONNECT TO RADIO WITH LOW LEVEL OUTPUT:
CONNECT TO RADIO WITH HIGH LEVEL OUTPUT:
WIRING DIAGRAM with an Amplifier
STEERING WHEELCONTROL CABLE
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
chevRolet tahoe 2007-2011
Automotive Data Solutions Inc. © 2015 6
BACKUP CAMBACKUP CAM
CENTERCENTER
SUBSUB
B
C
A FG
C
AB
G
F
1B
E
E
STEP 1
BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)
MAINHARNESS
RCA CABLES
WIRES FROMVEHICLE
GMS05+ T-HARNESS
FACTORY RADIO HARNESS
(NOT CONNECTED)
(NOT CONNECTED)
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
STEP 2
STEP 3
STEP 4
SPEAKER
MAESTRO RR MODULE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED
BROWN - MUTE (-)
CONNECT TOAFTERMARKET RADIO
SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS
WIRING DIAGRAM without an Amplifier
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
STEERING WHEELCONTROL CABLE
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SR)-GMS05-AS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro GM5+ Installation Harness
INSTALL GUIDEChEvROLET TAhOE
WIThOUT NAv 2012-2014Retains steeRing wheel contRols, onstaR, bluetooth and moRe!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
chevRolet tahoe without nav 2012-2014
Automotive Data Solutions Inc. © 2015 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Before Installing 3
Installation Instructions 4
Wiring Diagram with an Amplifi er 5
Wiring Diagram without an Amplifi er 6
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
chevRolet tahoe without nav 2012-2014
Automotive Data Solutions Inc. © 2015 3
BEFORE INSTALLING STEP 1
DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:
METHOD 1: Look for the following logos in the vehicle. They are usually on the speaker covers or on the radio unit. If you fi nd any of the following logos Bose, Pioneer or Monsoon, you have a factory amplifi er.
METHOD 2: Look for the following sticker in the glove box. This sticker will indicate all the Regular Production Option (RPO) codes. If you fi nd any of the following codes UQA, UQS or UQG, you have a factory amplifi er.
STEP 2IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:
Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifi er and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits.
IF YOUR VEHICLE NOT IS EQUIPPED WITH A FACTORY AMPLIFIER:
Follow the installation instructions and complete the installation as shown in the wiring diagram without an amplifi er.
1
SERVICE PARTS IDENTIFICATION DO NOT REMOVE
AGI AG2 AJ1 AL0 AM7 AN3 AU0 AU3 A31 B30 B4UB58 B81 B82 CJ3 C49 C7H DF5 DK7 DL3 DT4 D07EVA E63 FF8 FF9 GT5 G80 JC4 KC4 KNP KUP K34K47 K68 LQ9 M32 NCI NEI NP3 NP5 OSG P30 QSSR4Y R9U R9Z SAF SLM TRB UC6 UK3 UQA U2K UFIUF3 UK3 VR4 VTV VXS V73 XSS X88 YD3 YD6 YE9YSS ZGC ZYI Z60 Z82 ISS ISZ 4IU 6YT 691 6927YT
BC/CC U 8555 692
143 5 FXWH2Q CKI57532GCEK19N031344764
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
chevRolet tahoe without nav 2012-2014
Automotive Data Solutions Inc. © 2015 4
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.
STEP 2
• Connect the factory harness to the GM5+ T-harness.
STEP 3• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
STEP 4• Connect all the harnesses to the Maestro RR module then
proceed to module setup.
The module is now ready to be used.
Insert the aftermarket radio in the dashboard housing and test all the functionalities.
Reassemble the dashboard carefully.
AMPLIFIER ONLYDETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS
• If your vehicle is equipped with a factory amplifi er you can connect the RCA wiring to the low level outputs of your aftermarket radio, or connect the level matching circuits to the speaker outputs of the aftermarket radio.
• If your aftermarket radio does not have low level outputs, has only a single RCA output, or the RCA output level is 2 volts or less then it is recommended to connect the level matching circuit to the speaker outputs. If the volume does not go loud enough using the RCA connections, the level matching circuits can be used.
• The internal amplifi er in some radios is not compatible with the level matching circuit. In these cases, there will be fl oor noise (hissing or buzzing at low levels) when the level matching circuit is connected. Change to the RCA connections to eliminate this noise.
TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
1
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
chevRolet tahoe without nav 2012-2014
Automotive Data Solutions Inc. © 2015 5
B
C
A FG
C
AB
G
F
CENTERCENTER
SUBSUB
BACKUP CAMBACKUP CAM
1A
E
E
BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED
MAESTRO RR MODULE
MAINHARNESS
RCA CABLES
WIRES FROMVEHICLE
GMS05+ T-HARNESS
FACTORY RADIO HARNESS
SPEAKER
WHITE
OR
WHITE/BLACKGRAYGRAY/BLACKGREENGREEN/BLACK
PURPLE/BLACKPURPLE
STEP 1
STEP 2
STEP 3
STEP 4
SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS
LF SPEAKER
RF SPEAKER
LR SPEAKER
RR SPEAKER
BROWN - MUTE (-)
CONNECT TOAFTERMARKET RADIO
CONNECT TO RADIO WITH LOW LEVEL OUTPUT:
CONNECT TO RADIO WITH HIGH LEVEL OUTPUT:
WIRING DIAGRAM with an Amplifier
STEERING WHEELCONTROL CABLE
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
chevRolet tahoe without nav 2012-2014
Automotive Data Solutions Inc. © 2015 6
BACKUP CAMBACKUP CAM
CENTERCENTER
SUBSUB
B
C
A FG
C
AB
G
F
1B
E
E
STEP 1
BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)
MAINHARNESS
RCA CABLES
WIRES FROMVEHICLE
GMS05+ T-HARNESS
FACTORY RADIO HARNESS
(NOT CONNECTED)
(NOT CONNECTED)
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
STEP 2
STEP 3
STEP 4
SPEAKER
MAESTRO RR MODULE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED
BROWN - MUTE (-)
CONNECT TOAFTERMARKET RADIO
SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS
WIRING DIAGRAM without an Amplifier
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
STEERING WHEELCONTROL CABLE
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SR)-GMS05-AS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro GM5+ Installation Harness
INSTALL GUIDEChEvROLET TRAvERSE
2009-2014Retains steeRing wheel contRols, onstaR, bluetooth and moRe!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
chevRolet tRaveRse 2009-2014
Automotive Data Solutions Inc. © 2015 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Before Installing 3
Installation Instructions 4
Wiring Diagram with an Amplifi er 5
Wiring Diagram without an Amplifi er 6
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
chevRolet tRaveRse 2009-2014
Automotive Data Solutions Inc. © 2015 3
BEFORE INSTALLING STEP 1
DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:
METHOD 1: Look for the following logos in the vehicle. They are usually on the speaker covers or on the radio unit. If you fi nd any of the following logos Bose, Pioneer or Monsoon, you have a factory amplifi er.
METHOD 2: Look for the following sticker in the glove box. This sticker will indicate all the Regular Production Option (RPO) codes. If you fi nd any of the following codes UQA, UQS or UQG, you have a factory amplifi er.
STEP 2IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:
Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifi er and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits.
IF YOUR VEHICLE NOT IS EQUIPPED WITH A FACTORY AMPLIFIER:
Follow the installation instructions and complete the installation as shown in the wiring diagram without an amplifi er.
1
SERVICE PARTS IDENTIFICATION DO NOT REMOVE
AGI AG2 AJ1 AL0 AM7 AN3 AU0 AU3 A31 B30 B4UB58 B81 B82 CJ3 C49 C7H DF5 DK7 DL3 DT4 D07EVA E63 FF8 FF9 GT5 G80 JC4 KC4 KNP KUP K34K47 K68 LQ9 M32 NCI NEI NP3 NP5 OSG P30 QSSR4Y R9U R9Z SAF SLM TRB UC6 UK3 UQA U2K UFIUF3 UK3 VR4 VTV VXS V73 XSS X88 YD3 YD6 YE9YSS ZGC ZYI Z60 Z82 ISS ISZ 4IU 6YT 691 6927YT
BC/CC U 8555 692
143 5 FXWH2Q CKI57532GCEK19N031344764
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
chevRolet tRaveRse 2009-2014
Automotive Data Solutions Inc. © 2015 4
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.
STEP 2
• Connect the factory harness to the GM5+ T-harness.
STEP 3• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
STEP 4• Connect all the harnesses to the Maestro RR module then
proceed to module setup.
The module is now ready to be used.
Insert the aftermarket radio in the dashboard housing and test all the functionalities.
Reassemble the dashboard carefully.
AMPLIFIER ONLYDETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS
• If your vehicle is equipped with a factory amplifi er you can connect the RCA wiring to the low level outputs of your aftermarket radio, or connect the level matching circuits to the speaker outputs of the aftermarket radio.
• If your aftermarket radio does not have low level outputs, has only a single RCA output, or the RCA output level is 2 volts or less then it is recommended to connect the level matching circuit to the speaker outputs. If the volume does not go loud enough using the RCA connections, the level matching circuits can be used.
• The internal amplifi er in some radios is not compatible with the level matching circuit. In these cases, there will be fl oor noise (hissing or buzzing at low levels) when the level matching circuit is connected. Change to the RCA connections to eliminate this noise.
TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
1
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
chevRolet tRaveRse 2009-2014
Automotive Data Solutions Inc. © 2015 5
B
C
A FG
C
AB
G
F
CENTERCENTER
SUBSUB
BACKUP CAMBACKUP CAM
1A
E
E
BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED
MAESTRO RR MODULE
MAINHARNESS
RCA CABLES
WIRES FROMVEHICLE
GMS05+ T-HARNESS
FACTORY RADIO HARNESS
SPEAKER
WHITE
OR
WHITE/BLACKGRAYGRAY/BLACKGREENGREEN/BLACK
PURPLE/BLACKPURPLE
STEP 1
STEP 2
STEP 3
STEP 4
SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS
LF SPEAKER
RF SPEAKER
LR SPEAKER
RR SPEAKER
BROWN - MUTE (-)
CONNECT TOAFTERMARKET RADIO
CONNECT TO RADIO WITH LOW LEVEL OUTPUT:
CONNECT TO RADIO WITH HIGH LEVEL OUTPUT:
WIRING DIAGRAM with an Amplifier
STEERING WHEELCONTROL CABLE
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
chevRolet tRaveRse 2009-2014
Automotive Data Solutions Inc. © 2015 6
BACKUP CAMBACKUP CAM
CENTERCENTER
SUBSUB
B
C
A FG
C
AB
G
F
1B
E
E
STEP 1
BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)
MAINHARNESS
RCA CABLES
WIRES FROMVEHICLE
GMS05+ T-HARNESS
FACTORY RADIO HARNESS
(NOT CONNECTED)
(NOT CONNECTED)
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
STEP 2
STEP 3
STEP 4
SPEAKER
MAESTRO RR MODULE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED
BROWN - MUTE (-)
CONNECT TOAFTERMARKET RADIO
SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS
WIRING DIAGRAM without an Amplifier
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
STEERING WHEELCONTROL CABLE
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SR)-GMS05-AS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro GM5+ Installation Harness
INSTALL GUIDEGMC ACADIA 2007-2014
Retains steeRing wheel contRols, onstaR, bluetooth and moRe!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
gmc acadia 2007-2014
Automotive Data Solutions Inc. © 2015 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Before Installing 3
Installation Instructions 4
Wiring Diagram with an Amplifi er 5
Wiring Diagram without an Amplifi er 6
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
gmc acadia 2007-2014
Automotive Data Solutions Inc. © 2015 3
BEFORE INSTALLING STEP 1
DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:
METHOD 1: Look for the following logos in the vehicle. They are usually on the speaker covers or on the radio unit. If you fi nd any of the following logos Bose, Pioneer or Monsoon, you have a factory amplifi er.
METHOD 2: Look for the following sticker in the glove box. This sticker will indicate all the Regular Production Option (RPO) codes. If you fi nd any of the following codes UQA, UQS or UQG, you have a factory amplifi er.
STEP 2IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:
Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifi er and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits.
IF YOUR VEHICLE NOT IS EQUIPPED WITH A FACTORY AMPLIFIER:
Follow the installation instructions and complete the installation as shown in the wiring diagram without an amplifi er.
1
SERVICE PARTS IDENTIFICATION DO NOT REMOVE
AGI AG2 AJ1 AL0 AM7 AN3 AU0 AU3 A31 B30 B4UB58 B81 B82 CJ3 C49 C7H DF5 DK7 DL3 DT4 D07EVA E63 FF8 FF9 GT5 G80 JC4 KC4 KNP KUP K34K47 K68 LQ9 M32 NCI NEI NP3 NP5 OSG P30 QSSR4Y R9U R9Z SAF SLM TRB UC6 UK3 UQA U2K UFIUF3 UK3 VR4 VTV VXS V73 XSS X88 YD3 YD6 YE9YSS ZGC ZYI Z60 Z82 ISS ISZ 4IU 6YT 691 6927YT
BC/CC U 8555 692
143 5 FXWH2Q CKI57532GCEK19N031344764
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
gmc acadia 2007-2014
Automotive Data Solutions Inc. © 2015 4
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.
STEP 2
• Connect the factory harness to the GM5+ T-harness.
STEP 3• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
STEP 4• Connect all the harnesses to the Maestro RR module then
proceed to module setup.
The module is now ready to be used.
Insert the aftermarket radio in the dashboard housing and test all the functionalities.
Reassemble the dashboard carefully.
AMPLIFIER ONLYDETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS
• If your vehicle is equipped with a factory amplifi er you can connect the RCA wiring to the low level outputs of your aftermarket radio, or connect the level matching circuits to the speaker outputs of the aftermarket radio.
• If your aftermarket radio does not have low level outputs, has only a single RCA output, or the RCA output level is 2 volts or less then it is recommended to connect the level matching circuit to the speaker outputs. If the volume does not go loud enough using the RCA connections, the level matching circuits can be used.
• The internal amplifi er in some radios is not compatible with the level matching circuit. In these cases, there will be fl oor noise (hissing or buzzing at low levels) when the level matching circuit is connected. Change to the RCA connections to eliminate this noise.
TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
1
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
gmc acadia 2007-2014
Automotive Data Solutions Inc. © 2015 5
B
C
A FG
C
AB
G
F
CENTERCENTER
SUBSUB
BACKUP CAMBACKUP CAM
1A
E
E
BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED
MAESTRO RR MODULE
MAINHARNESS
RCA CABLES
WIRES FROMVEHICLE
GMS05+ T-HARNESS
FACTORY RADIO HARNESS
SPEAKER
WHITE
OR
WHITE/BLACKGRAYGRAY/BLACKGREENGREEN/BLACK
PURPLE/BLACKPURPLE
STEP 1
STEP 2
STEP 3
STEP 4
SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS
LF SPEAKER
RF SPEAKER
LR SPEAKER
RR SPEAKER
BROWN - MUTE (-)
CONNECT TOAFTERMARKET RADIO
CONNECT TO RADIO WITH LOW LEVEL OUTPUT:
CONNECT TO RADIO WITH HIGH LEVEL OUTPUT:
WIRING DIAGRAM with an Amplifier
STEERING WHEELCONTROL CABLE
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
gmc acadia 2007-2014
Automotive Data Solutions Inc. © 2015 6
BACKUP CAMBACKUP CAM
CENTERCENTER
SUBSUB
B
C
A FG
C
AB
G
F
1B
E
E
STEP 1
BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)
MAINHARNESS
RCA CABLES
WIRES FROMVEHICLE
GMS05+ T-HARNESS
FACTORY RADIO HARNESS
(NOT CONNECTED)
(NOT CONNECTED)
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
STEP 2
STEP 3
STEP 4
SPEAKER
MAESTRO RR MODULE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED
BROWN - MUTE (-)
CONNECT TOAFTERMARKET RADIO
SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS
WIRING DIAGRAM without an Amplifier
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
STEERING WHEELCONTROL CABLE
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SR)-GMS05-AS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro GM5+ Installation Harness
INSTALL GUIDEGMC SAvANA 2008-2014
Retains steeRing wheel contRols, onstaR, bluetooth and moRe!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
gmc savana 2008-2014
Automotive Data Solutions Inc. © 2015 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Before Installing 3
Installation Instructions 4
Wiring Diagram with an Amplifi er 5
Wiring Diagram without an Amplifi er 6
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
gmc savana 2008-2014
Automotive Data Solutions Inc. © 2015 3
BEFORE INSTALLING STEP 1
DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:
METHOD 1: Look for the following logos in the vehicle. They are usually on the speaker covers or on the radio unit. If you fi nd any of the following logos Bose, Pioneer or Monsoon, you have a factory amplifi er.
METHOD 2: Look for the following sticker in the glove box. This sticker will indicate all the Regular Production Option (RPO) codes. If you fi nd any of the following codes UQA, UQS or UQG, you have a factory amplifi er.
STEP 2IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:
Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifi er and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits.
IF YOUR VEHICLE NOT IS EQUIPPED WITH A FACTORY AMPLIFIER:
Follow the installation instructions and complete the installation as shown in the wiring diagram without an amplifi er.
1
SERVICE PARTS IDENTIFICATION DO NOT REMOVE
AGI AG2 AJ1 AL0 AM7 AN3 AU0 AU3 A31 B30 B4UB58 B81 B82 CJ3 C49 C7H DF5 DK7 DL3 DT4 D07EVA E63 FF8 FF9 GT5 G80 JC4 KC4 KNP KUP K34K47 K68 LQ9 M32 NCI NEI NP3 NP5 OSG P30 QSSR4Y R9U R9Z SAF SLM TRB UC6 UK3 UQA U2K UFIUF3 UK3 VR4 VTV VXS V73 XSS X88 YD3 YD6 YE9YSS ZGC ZYI Z60 Z82 ISS ISZ 4IU 6YT 691 6927YT
BC/CC U 8555 692
143 5 FXWH2Q CKI57532GCEK19N031344764
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
gmc savana 2008-2014
Automotive Data Solutions Inc. © 2015 4
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.
STEP 2
• Connect the factory harness to the GM5+ T-harness.
STEP 3• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
STEP 4• Connect all the harnesses to the Maestro RR module then
proceed to module setup.
The module is now ready to be used.
Insert the aftermarket radio in the dashboard housing and test all the functionalities.
Reassemble the dashboard carefully.
AMPLIFIER ONLYDETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS
• If your vehicle is equipped with a factory amplifi er you can connect the RCA wiring to the low level outputs of your aftermarket radio, or connect the level matching circuits to the speaker outputs of the aftermarket radio.
• If your aftermarket radio does not have low level outputs, has only a single RCA output, or the RCA output level is 2 volts or less then it is recommended to connect the level matching circuit to the speaker outputs. If the volume does not go loud enough using the RCA connections, the level matching circuits can be used.
• The internal amplifi er in some radios is not compatible with the level matching circuit. In these cases, there will be fl oor noise (hissing or buzzing at low levels) when the level matching circuit is connected. Change to the RCA connections to eliminate this noise.
TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
1
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
gmc savana 2008-2014
Automotive Data Solutions Inc. © 2015 5
B
C
A FG
C
AB
G
F
CENTERCENTER
SUBSUB
BACKUP CAMBACKUP CAM
1A
E
E
BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED
MAESTRO RR MODULE
MAINHARNESS
RCA CABLES
WIRES FROMVEHICLE
GMS05+ T-HARNESS
FACTORY RADIO HARNESS
SPEAKER
WHITE
OR
WHITE/BLACKGRAYGRAY/BLACKGREENGREEN/BLACK
PURPLE/BLACKPURPLE
STEP 1
STEP 2
STEP 3
STEP 4
SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS
LF SPEAKER
RF SPEAKER
LR SPEAKER
RR SPEAKER
BROWN - MUTE (-)
CONNECT TOAFTERMARKET RADIO
CONNECT TO RADIO WITH LOW LEVEL OUTPUT:
CONNECT TO RADIO WITH HIGH LEVEL OUTPUT:
WIRING DIAGRAM with an Amplifier
STEERING WHEELCONTROL CABLE
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
gmc savana 2008-2014
Automotive Data Solutions Inc. © 2015 6
BACKUP CAMBACKUP CAM
CENTERCENTER
SUBSUB
B
C
A FG
C
AB
G
F
1B
E
E
STEP 1
BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)
MAINHARNESS
RCA CABLES
WIRES FROMVEHICLE
GMS05+ T-HARNESS
FACTORY RADIO HARNESS
(NOT CONNECTED)
(NOT CONNECTED)
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
STEP 2
STEP 3
STEP 4
SPEAKER
MAESTRO RR MODULE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED
BROWN - MUTE (-)
CONNECT TOAFTERMARKET RADIO
SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS
WIRING DIAGRAM without an Amplifier
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
STEERING WHEELCONTROL CABLE
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SR)-GMS05-AS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro GM5+ Installation Harness
INSTALL GUIDEGMC SIERRA 1500
2007-2011Retains steeRing wheel contRols, onstaR, bluetooth and moRe!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
gmc sieRRa 1500 2007-2011
Automotive Data Solutions Inc. © 2015 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Before Installing 3
Installation Instructions 4
Wiring Diagram with an Amplifi er 5
Wiring Diagram without an Amplifi er 6
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
gmc sieRRa 1500 2007-2011
Automotive Data Solutions Inc. © 2015 3
BEFORE INSTALLING STEP 1
DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:
METHOD 1: Look for the following logos in the vehicle. They are usually on the speaker covers or on the radio unit. If you fi nd any of the following logos Bose, Pioneer or Monsoon, you have a factory amplifi er.
METHOD 2: Look for the following sticker in the glove box. This sticker will indicate all the Regular Production Option (RPO) codes. If you fi nd any of the following codes UQA, UQS or UQG, you have a factory amplifi er.
STEP 2IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:
Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifi er and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits.
IF YOUR VEHICLE NOT IS EQUIPPED WITH A FACTORY AMPLIFIER:
Follow the installation instructions and complete the installation as shown in the wiring diagram without an amplifi er.
1
SERVICE PARTS IDENTIFICATION DO NOT REMOVE
AGI AG2 AJ1 AL0 AM7 AN3 AU0 AU3 A31 B30 B4UB58 B81 B82 CJ3 C49 C7H DF5 DK7 DL3 DT4 D07EVA E63 FF8 FF9 GT5 G80 JC4 KC4 KNP KUP K34K47 K68 LQ9 M32 NCI NEI NP3 NP5 OSG P30 QSSR4Y R9U R9Z SAF SLM TRB UC6 UK3 UQA U2K UFIUF3 UK3 VR4 VTV VXS V73 XSS X88 YD3 YD6 YE9YSS ZGC ZYI Z60 Z82 ISS ISZ 4IU 6YT 691 6927YT
BC/CC U 8555 692
143 5 FXWH2Q CKI57532GCEK19N031344764
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
gmc sieRRa 1500 2007-2011
Automotive Data Solutions Inc. © 2015 4
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.
STEP 2
• Connect the factory harness to the GM5+ T-harness.
STEP 3• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
STEP 4• Connect all the harnesses to the Maestro RR module then
proceed to module setup.
The module is now ready to be used.
Insert the aftermarket radio in the dashboard housing and test all the functionalities.
Reassemble the dashboard carefully.
AMPLIFIER ONLYDETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS
• If your vehicle is equipped with a factory amplifi er you can connect the RCA wiring to the low level outputs of your aftermarket radio, or connect the level matching circuits to the speaker outputs of the aftermarket radio.
• If your aftermarket radio does not have low level outputs, has only a single RCA output, or the RCA output level is 2 volts or less then it is recommended to connect the level matching circuit to the speaker outputs. If the volume does not go loud enough using the RCA connections, the level matching circuits can be used.
• The internal amplifi er in some radios is not compatible with the level matching circuit. In these cases, there will be fl oor noise (hissing or buzzing at low levels) when the level matching circuit is connected. Change to the RCA connections to eliminate this noise.
TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
1
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
gmc sieRRa 1500 2007-2011
Automotive Data Solutions Inc. © 2015 5
B
C
A FG
C
AB
G
F
CENTERCENTER
SUBSUB
BACKUP CAMBACKUP CAM
1A
E
E
BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED
MAESTRO RR MODULE
MAINHARNESS
RCA CABLES
WIRES FROMVEHICLE
GMS05+ T-HARNESS
FACTORY RADIO HARNESS
SPEAKER
WHITE
OR
WHITE/BLACKGRAYGRAY/BLACKGREENGREEN/BLACK
PURPLE/BLACKPURPLE
STEP 1
STEP 2
STEP 3
STEP 4
SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS
LF SPEAKER
RF SPEAKER
LR SPEAKER
RR SPEAKER
BROWN - MUTE (-)
CONNECT TOAFTERMARKET RADIO
CONNECT TO RADIO WITH LOW LEVEL OUTPUT:
CONNECT TO RADIO WITH HIGH LEVEL OUTPUT:
WIRING DIAGRAM with an Amplifier
STEERING WHEELCONTROL CABLE
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
gmc sieRRa 1500 2007-2011
Automotive Data Solutions Inc. © 2015 6
BACKUP CAMBACKUP CAM
CENTERCENTER
SUBSUB
B
C
A FG
C
AB
G
F
1B
E
E
STEP 1
BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)
MAINHARNESS
RCA CABLES
WIRES FROMVEHICLE
GMS05+ T-HARNESS
FACTORY RADIO HARNESS
(NOT CONNECTED)
(NOT CONNECTED)
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
STEP 2
STEP 3
STEP 4
SPEAKER
MAESTRO RR MODULE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED
BROWN - MUTE (-)
CONNECT TOAFTERMARKET RADIO
SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS
WIRING DIAGRAM without an Amplifier
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
STEERING WHEELCONTROL CABLE
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SR)-GMS05-AS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro GM5+ Installation Harness
INSTALL GUIDEGMC SIERRA 1500
WIThOUT NAv 2012-2014Retains steeRing wheel contRols, onstaR, bluetooth and moRe!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
gmc sieRRa 1500 without nav 2012-2014
Automotive Data Solutions Inc. © 2015 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Before Installing 3
Installation Instructions 4
Wiring Diagram with an Amplifi er 5
Wiring Diagram without an Amplifi er 6
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
gmc sieRRa 1500 without nav 2012-2014
Automotive Data Solutions Inc. © 2015 3
BEFORE INSTALLING STEP 1
DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:
METHOD 1: Look for the following logos in the vehicle. They are usually on the speaker covers or on the radio unit. If you fi nd any of the following logos Bose, Pioneer or Monsoon, you have a factory amplifi er.
METHOD 2: Look for the following sticker in the glove box. This sticker will indicate all the Regular Production Option (RPO) codes. If you fi nd any of the following codes UQA, UQS or UQG, you have a factory amplifi er.
STEP 2IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:
Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifi er and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits.
IF YOUR VEHICLE NOT IS EQUIPPED WITH A FACTORY AMPLIFIER:
Follow the installation instructions and complete the installation as shown in the wiring diagram without an amplifi er.
1
SERVICE PARTS IDENTIFICATION DO NOT REMOVE
AGI AG2 AJ1 AL0 AM7 AN3 AU0 AU3 A31 B30 B4UB58 B81 B82 CJ3 C49 C7H DF5 DK7 DL3 DT4 D07EVA E63 FF8 FF9 GT5 G80 JC4 KC4 KNP KUP K34K47 K68 LQ9 M32 NCI NEI NP3 NP5 OSG P30 QSSR4Y R9U R9Z SAF SLM TRB UC6 UK3 UQA U2K UFIUF3 UK3 VR4 VTV VXS V73 XSS X88 YD3 YD6 YE9YSS ZGC ZYI Z60 Z82 ISS ISZ 4IU 6YT 691 6927YT
BC/CC U 8555 692
143 5 FXWH2Q CKI57532GCEK19N031344764
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
gmc sieRRa 1500 without nav 2012-2014
Automotive Data Solutions Inc. © 2015 4
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.
STEP 2
• Connect the factory harness to the GM5+ T-harness.
STEP 3• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
STEP 4• Connect all the harnesses to the Maestro RR module then
proceed to module setup.
The module is now ready to be used.
Insert the aftermarket radio in the dashboard housing and test all the functionalities.
Reassemble the dashboard carefully.
AMPLIFIER ONLYDETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS
• If your vehicle is equipped with a factory amplifi er you can connect the RCA wiring to the low level outputs of your aftermarket radio, or connect the level matching circuits to the speaker outputs of the aftermarket radio.
• If your aftermarket radio does not have low level outputs, has only a single RCA output, or the RCA output level is 2 volts or less then it is recommended to connect the level matching circuit to the speaker outputs. If the volume does not go loud enough using the RCA connections, the level matching circuits can be used.
• The internal amplifi er in some radios is not compatible with the level matching circuit. In these cases, there will be fl oor noise (hissing or buzzing at low levels) when the level matching circuit is connected. Change to the RCA connections to eliminate this noise.
TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
1
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
gmc sieRRa 1500 without nav 2012-2014
Automotive Data Solutions Inc. © 2015 5
B
C
A FG
C
AB
G
F
CENTERCENTER
SUBSUB
BACKUP CAMBACKUP CAM
1A
E
E
BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED
MAESTRO RR MODULE
MAINHARNESS
RCA CABLES
WIRES FROMVEHICLE
GMS05+ T-HARNESS
FACTORY RADIO HARNESS
SPEAKER
WHITE
OR
WHITE/BLACKGRAYGRAY/BLACKGREENGREEN/BLACK
PURPLE/BLACKPURPLE
STEP 1
STEP 2
STEP 3
STEP 4
SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS
LF SPEAKER
RF SPEAKER
LR SPEAKER
RR SPEAKER
BROWN - MUTE (-)
CONNECT TOAFTERMARKET RADIO
CONNECT TO RADIO WITH LOW LEVEL OUTPUT:
CONNECT TO RADIO WITH HIGH LEVEL OUTPUT:
WIRING DIAGRAM with an Amplifier
STEERING WHEELCONTROL CABLE
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
gmc sieRRa 1500 without nav 2012-2014
Automotive Data Solutions Inc. © 2015 6
BACKUP CAMBACKUP CAM
CENTERCENTER
SUBSUB
B
C
A FG
C
AB
G
F
1B
E
E
STEP 1
BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)
MAINHARNESS
RCA CABLES
WIRES FROMVEHICLE
GMS05+ T-HARNESS
FACTORY RADIO HARNESS
(NOT CONNECTED)
(NOT CONNECTED)
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
STEP 2
STEP 3
STEP 4
SPEAKER
MAESTRO RR MODULE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED
BROWN - MUTE (-)
CONNECT TOAFTERMARKET RADIO
SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS
WIRING DIAGRAM without an Amplifier
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
STEERING WHEELCONTROL CABLE
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SR)-GMS05-AS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro GM5+ Installation Harness
INSTALL GUIDEGMC SIERRA 2500 & 3500
2007-2011Retains steeRing wheel contRols, onstaR, bluetooth and moRe!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
gmc sieRRa 2500 & 3500 2007-2011
Automotive Data Solutions Inc. © 2015 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Before Installing 3
Installation Instructions 4
Wiring Diagram with an Amplifi er 5
Wiring Diagram without an Amplifi er 6
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
gmc sieRRa 2500 & 3500 2007-2011
Automotive Data Solutions Inc. © 2015 3
BEFORE INSTALLING STEP 1
DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:
METHOD 1: Look for the following logos in the vehicle. They are usually on the speaker covers or on the radio unit. If you fi nd any of the following logos Bose, Pioneer or Monsoon, you have a factory amplifi er.
METHOD 2: Look for the following sticker in the glove box. This sticker will indicate all the Regular Production Option (RPO) codes. If you fi nd any of the following codes UQA, UQS or UQG, you have a factory amplifi er.
STEP 2IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:
Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifi er and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits.
IF YOUR VEHICLE NOT IS EQUIPPED WITH A FACTORY AMPLIFIER:
Follow the installation instructions and complete the installation as shown in the wiring diagram without an amplifi er.
1
SERVICE PARTS IDENTIFICATION DO NOT REMOVE
AGI AG2 AJ1 AL0 AM7 AN3 AU0 AU3 A31 B30 B4UB58 B81 B82 CJ3 C49 C7H DF5 DK7 DL3 DT4 D07EVA E63 FF8 FF9 GT5 G80 JC4 KC4 KNP KUP K34K47 K68 LQ9 M32 NCI NEI NP3 NP5 OSG P30 QSSR4Y R9U R9Z SAF SLM TRB UC6 UK3 UQA U2K UFIUF3 UK3 VR4 VTV VXS V73 XSS X88 YD3 YD6 YE9YSS ZGC ZYI Z60 Z82 ISS ISZ 4IU 6YT 691 6927YT
BC/CC U 8555 692
143 5 FXWH2Q CKI57532GCEK19N031344764
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
gmc sieRRa 2500 & 3500 2007-2011
Automotive Data Solutions Inc. © 2015 4
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.
STEP 2
• Connect the factory harness to the GM5+ T-harness.
STEP 3• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
STEP 4• Connect all the harnesses to the Maestro RR module then
proceed to module setup.
The module is now ready to be used.
Insert the aftermarket radio in the dashboard housing and test all the functionalities.
Reassemble the dashboard carefully.
AMPLIFIER ONLYDETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS
• If your vehicle is equipped with a factory amplifi er you can connect the RCA wiring to the low level outputs of your aftermarket radio, or connect the level matching circuits to the speaker outputs of the aftermarket radio.
• If your aftermarket radio does not have low level outputs, has only a single RCA output, or the RCA output level is 2 volts or less then it is recommended to connect the level matching circuit to the speaker outputs. If the volume does not go loud enough using the RCA connections, the level matching circuits can be used.
• The internal amplifi er in some radios is not compatible with the level matching circuit. In these cases, there will be fl oor noise (hissing or buzzing at low levels) when the level matching circuit is connected. Change to the RCA connections to eliminate this noise.
TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
1
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
gmc sieRRa 2500 & 3500 2007-2011
Automotive Data Solutions Inc. © 2015 5
B
C
A FG
C
AB
G
F
CENTERCENTER
SUBSUB
BACKUP CAMBACKUP CAM
1A
E
E
BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED
MAESTRO RR MODULE
MAINHARNESS
RCA CABLES
WIRES FROMVEHICLE
GMS05+ T-HARNESS
FACTORY RADIO HARNESS
SPEAKER
WHITE
OR
WHITE/BLACKGRAYGRAY/BLACKGREENGREEN/BLACK
PURPLE/BLACKPURPLE
STEP 1
STEP 2
STEP 3
STEP 4
SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS
LF SPEAKER
RF SPEAKER
LR SPEAKER
RR SPEAKER
BROWN - MUTE (-)
CONNECT TOAFTERMARKET RADIO
CONNECT TO RADIO WITH LOW LEVEL OUTPUT:
CONNECT TO RADIO WITH HIGH LEVEL OUTPUT:
WIRING DIAGRAM with an Amplifier
STEERING WHEELCONTROL CABLE
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
gmc sieRRa 2500 & 3500 2007-2011
Automotive Data Solutions Inc. © 2015 6
BACKUP CAMBACKUP CAM
CENTERCENTER
SUBSUB
B
C
A FG
C
AB
G
F
1B
E
E
STEP 1
BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)
MAINHARNESS
RCA CABLES
WIRES FROMVEHICLE
GMS05+ T-HARNESS
FACTORY RADIO HARNESS
(NOT CONNECTED)
(NOT CONNECTED)
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
STEP 2
STEP 3
STEP 4
SPEAKER
MAESTRO RR MODULE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED
BROWN - MUTE (-)
CONNECT TOAFTERMARKET RADIO
SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS
WIRING DIAGRAM without an Amplifier
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
STEERING WHEELCONTROL CABLE
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SR)-GMS05-AS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro GM5+ Installation Harness
INSTALL GUIDEGMC SIERRA 2500 & 3500WIThOUT NAv 2012-2014
Retains steeRing wheel contRols, onstaR, bluetooth and moRe!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
gmc sieRRa 2500 & 3500 without nav 2012-2014
Automotive Data Solutions Inc. © 2015 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Before Installing 3
Installation Instructions 4
Wiring Diagram with an Amplifi er 5
Wiring Diagram without an Amplifi er 6
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
gmc sieRRa 2500 & 3500 without nav 2012-2014
Automotive Data Solutions Inc. © 2015 3
BEFORE INSTALLING STEP 1
DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:
METHOD 1: Look for the following logos in the vehicle. They are usually on the speaker covers or on the radio unit. If you fi nd any of the following logos Bose, Pioneer or Monsoon, you have a factory amplifi er.
METHOD 2: Look for the following sticker in the glove box. This sticker will indicate all the Regular Production Option (RPO) codes. If you fi nd any of the following codes UQA, UQS or UQG, you have a factory amplifi er.
STEP 2IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:
Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifi er and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits.
IF YOUR VEHICLE NOT IS EQUIPPED WITH A FACTORY AMPLIFIER:
Follow the installation instructions and complete the installation as shown in the wiring diagram without an amplifi er.
1
SERVICE PARTS IDENTIFICATION DO NOT REMOVE
AGI AG2 AJ1 AL0 AM7 AN3 AU0 AU3 A31 B30 B4UB58 B81 B82 CJ3 C49 C7H DF5 DK7 DL3 DT4 D07EVA E63 FF8 FF9 GT5 G80 JC4 KC4 KNP KUP K34K47 K68 LQ9 M32 NCI NEI NP3 NP5 OSG P30 QSSR4Y R9U R9Z SAF SLM TRB UC6 UK3 UQA U2K UFIUF3 UK3 VR4 VTV VXS V73 XSS X88 YD3 YD6 YE9YSS ZGC ZYI Z60 Z82 ISS ISZ 4IU 6YT 691 6927YT
BC/CC U 8555 692
143 5 FXWH2Q CKI57532GCEK19N031344764
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
gmc sieRRa 2500 & 3500 without nav 2012-2014
Automotive Data Solutions Inc. © 2015 4
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.
STEP 2
• Connect the factory harness to the GM5+ T-harness.
STEP 3• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
STEP 4• Connect all the harnesses to the Maestro RR module then
proceed to module setup.
The module is now ready to be used.
Insert the aftermarket radio in the dashboard housing and test all the functionalities.
Reassemble the dashboard carefully.
AMPLIFIER ONLYDETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS
• If your vehicle is equipped with a factory amplifi er you can connect the RCA wiring to the low level outputs of your aftermarket radio, or connect the level matching circuits to the speaker outputs of the aftermarket radio.
• If your aftermarket radio does not have low level outputs, has only a single RCA output, or the RCA output level is 2 volts or less then it is recommended to connect the level matching circuit to the speaker outputs. If the volume does not go loud enough using the RCA connections, the level matching circuits can be used.
• The internal amplifi er in some radios is not compatible with the level matching circuit. In these cases, there will be fl oor noise (hissing or buzzing at low levels) when the level matching circuit is connected. Change to the RCA connections to eliminate this noise.
TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
1
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
gmc sieRRa 2500 & 3500 without nav 2012-2014
Automotive Data Solutions Inc. © 2015 5
B
C
A FG
C
AB
G
F
CENTERCENTER
SUBSUB
BACKUP CAMBACKUP CAM
1A
E
E
BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED
MAESTRO RR MODULE
MAINHARNESS
RCA CABLES
WIRES FROMVEHICLE
GMS05+ T-HARNESS
FACTORY RADIO HARNESS
SPEAKER
WHITE
OR
WHITE/BLACKGRAYGRAY/BLACKGREENGREEN/BLACK
PURPLE/BLACKPURPLE
STEP 1
STEP 2
STEP 3
STEP 4
SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS
LF SPEAKER
RF SPEAKER
LR SPEAKER
RR SPEAKER
BROWN - MUTE (-)
CONNECT TOAFTERMARKET RADIO
CONNECT TO RADIO WITH LOW LEVEL OUTPUT:
CONNECT TO RADIO WITH HIGH LEVEL OUTPUT:
WIRING DIAGRAM with an Amplifier
STEERING WHEELCONTROL CABLE
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
gmc sieRRa 2500 & 3500 without nav 2012-2014
Automotive Data Solutions Inc. © 2015 6
BACKUP CAMBACKUP CAM
CENTERCENTER
SUBSUB
B
C
A FG
C
AB
G
F
1B
E
E
STEP 1
BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)
MAINHARNESS
RCA CABLES
WIRES FROMVEHICLE
GMS05+ T-HARNESS
FACTORY RADIO HARNESS
(NOT CONNECTED)
(NOT CONNECTED)
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
STEP 2
STEP 3
STEP 4
SPEAKER
MAESTRO RR MODULE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED
BROWN - MUTE (-)
CONNECT TOAFTERMARKET RADIO
SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS
WIRING DIAGRAM without an Amplifier
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
STEERING WHEELCONTROL CABLE
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SR)-GMS05-AS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro GM5+ Installation Harness
INSTALL GUIDEGMC YUkON 2007-2011
Retains steeRing wheel contRols, onstaR, bluetooth and moRe!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
gmc Yukon 2007-2011
Automotive Data Solutions Inc. © 2015 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Before Installing 3
Installation Instructions 4
Wiring Diagram with an Amplifi er 5
Wiring Diagram without an Amplifi er 6
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
gmc Yukon 2007-2011
Automotive Data Solutions Inc. © 2015 3
BEFORE INSTALLING STEP 1
DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:
METHOD 1: Look for the following logos in the vehicle. They are usually on the speaker covers or on the radio unit. If you fi nd any of the following logos Bose, Pioneer or Monsoon, you have a factory amplifi er.
METHOD 2: Look for the following sticker in the glove box. This sticker will indicate all the Regular Production Option (RPO) codes. If you fi nd any of the following codes UQA, UQS or UQG, you have a factory amplifi er.
STEP 2IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:
Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifi er and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits.
IF YOUR VEHICLE NOT IS EQUIPPED WITH A FACTORY AMPLIFIER:
Follow the installation instructions and complete the installation as shown in the wiring diagram without an amplifi er.
1
SERVICE PARTS IDENTIFICATION DO NOT REMOVE
AGI AG2 AJ1 AL0 AM7 AN3 AU0 AU3 A31 B30 B4UB58 B81 B82 CJ3 C49 C7H DF5 DK7 DL3 DT4 D07EVA E63 FF8 FF9 GT5 G80 JC4 KC4 KNP KUP K34K47 K68 LQ9 M32 NCI NEI NP3 NP5 OSG P30 QSSR4Y R9U R9Z SAF SLM TRB UC6 UK3 UQA U2K UFIUF3 UK3 VR4 VTV VXS V73 XSS X88 YD3 YD6 YE9YSS ZGC ZYI Z60 Z82 ISS ISZ 4IU 6YT 691 6927YT
BC/CC U 8555 692
143 5 FXWH2Q CKI57532GCEK19N031344764
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
gmc Yukon 2007-2011
Automotive Data Solutions Inc. © 2015 4
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.
STEP 2
• Connect the factory harness to the GM5+ T-harness.
STEP 3• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
STEP 4• Connect all the harnesses to the Maestro RR module then
proceed to module setup.
The module is now ready to be used.
Insert the aftermarket radio in the dashboard housing and test all the functionalities.
Reassemble the dashboard carefully.
AMPLIFIER ONLYDETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS
• If your vehicle is equipped with a factory amplifi er you can connect the RCA wiring to the low level outputs of your aftermarket radio, or connect the level matching circuits to the speaker outputs of the aftermarket radio.
• If your aftermarket radio does not have low level outputs, has only a single RCA output, or the RCA output level is 2 volts or less then it is recommended to connect the level matching circuit to the speaker outputs. If the volume does not go loud enough using the RCA connections, the level matching circuits can be used.
• The internal amplifi er in some radios is not compatible with the level matching circuit. In these cases, there will be fl oor noise (hissing or buzzing at low levels) when the level matching circuit is connected. Change to the RCA connections to eliminate this noise.
TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
1
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
gmc Yukon 2007-2011
Automotive Data Solutions Inc. © 2015 5
B
C
A FG
C
AB
G
F
CENTERCENTER
SUBSUB
BACKUP CAMBACKUP CAM
1A
E
E
BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED
MAESTRO RR MODULE
MAINHARNESS
RCA CABLES
WIRES FROMVEHICLE
GMS05+ T-HARNESS
FACTORY RADIO HARNESS
SPEAKER
WHITE
OR
WHITE/BLACKGRAYGRAY/BLACKGREENGREEN/BLACK
PURPLE/BLACKPURPLE
STEP 1
STEP 2
STEP 3
STEP 4
SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS
LF SPEAKER
RF SPEAKER
LR SPEAKER
RR SPEAKER
BROWN - MUTE (-)
CONNECT TOAFTERMARKET RADIO
CONNECT TO RADIO WITH LOW LEVEL OUTPUT:
CONNECT TO RADIO WITH HIGH LEVEL OUTPUT:
WIRING DIAGRAM with an Amplifier
STEERING WHEELCONTROL CABLE
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
gmc Yukon 2007-2011
Automotive Data Solutions Inc. © 2015 6
BACKUP CAMBACKUP CAM
CENTERCENTER
SUBSUB
B
C
A FG
C
AB
G
F
1B
E
E
STEP 1
BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)
MAINHARNESS
RCA CABLES
WIRES FROMVEHICLE
GMS05+ T-HARNESS
FACTORY RADIO HARNESS
(NOT CONNECTED)
(NOT CONNECTED)
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
STEP 2
STEP 3
STEP 4
SPEAKER
MAESTRO RR MODULE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED
BROWN - MUTE (-)
CONNECT TOAFTERMARKET RADIO
SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS
WIRING DIAGRAM without an Amplifier
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
STEERING WHEELCONTROL CABLE
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SR)-GMS05-AS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro GM5+ Installation Harness
INSTALL GUIDEGMC YUkON xL
2007-2011Retains steeRing wheel contRols, onstaR, bluetooth and moRe!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
gmc Yukon xl 2007-2011
Automotive Data Solutions Inc. © 2015 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Before Installing 3
Installation Instructions 4
Wiring Diagram with an Amplifi er 5
Wiring Diagram without an Amplifi er 6
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
gmc Yukon xl 2007-2011
Automotive Data Solutions Inc. © 2015 3
BEFORE INSTALLING STEP 1
DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:
METHOD 1: Look for the following logos in the vehicle. They are usually on the speaker covers or on the radio unit. If you fi nd any of the following logos Bose, Pioneer or Monsoon, you have a factory amplifi er.
METHOD 2: Look for the following sticker in the glove box. This sticker will indicate all the Regular Production Option (RPO) codes. If you fi nd any of the following codes UQA, UQS or UQG, you have a factory amplifi er.
STEP 2IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:
Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifi er and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits.
IF YOUR VEHICLE NOT IS EQUIPPED WITH A FACTORY AMPLIFIER:
Follow the installation instructions and complete the installation as shown in the wiring diagram without an amplifi er.
1
SERVICE PARTS IDENTIFICATION DO NOT REMOVE
AGI AG2 AJ1 AL0 AM7 AN3 AU0 AU3 A31 B30 B4UB58 B81 B82 CJ3 C49 C7H DF5 DK7 DL3 DT4 D07EVA E63 FF8 FF9 GT5 G80 JC4 KC4 KNP KUP K34K47 K68 LQ9 M32 NCI NEI NP3 NP5 OSG P30 QSSR4Y R9U R9Z SAF SLM TRB UC6 UK3 UQA U2K UFIUF3 UK3 VR4 VTV VXS V73 XSS X88 YD3 YD6 YE9YSS ZGC ZYI Z60 Z82 ISS ISZ 4IU 6YT 691 6927YT
BC/CC U 8555 692
143 5 FXWH2Q CKI57532GCEK19N031344764
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
gmc Yukon xl 2007-2011
Automotive Data Solutions Inc. © 2015 4
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.
STEP 2
• Connect the factory harness to the GM5+ T-harness.
STEP 3• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
STEP 4• Connect all the harnesses to the Maestro RR module then
proceed to module setup.
The module is now ready to be used.
Insert the aftermarket radio in the dashboard housing and test all the functionalities.
Reassemble the dashboard carefully.
AMPLIFIER ONLYDETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS
• If your vehicle is equipped with a factory amplifi er you can connect the RCA wiring to the low level outputs of your aftermarket radio, or connect the level matching circuits to the speaker outputs of the aftermarket radio.
• If your aftermarket radio does not have low level outputs, has only a single RCA output, or the RCA output level is 2 volts or less then it is recommended to connect the level matching circuit to the speaker outputs. If the volume does not go loud enough using the RCA connections, the level matching circuits can be used.
• The internal amplifi er in some radios is not compatible with the level matching circuit. In these cases, there will be fl oor noise (hissing or buzzing at low levels) when the level matching circuit is connected. Change to the RCA connections to eliminate this noise.
TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
1
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
gmc Yukon xl 2007-2011
Automotive Data Solutions Inc. © 2015 5
B
C
A FG
C
AB
G
F
CENTERCENTER
SUBSUB
BACKUP CAMBACKUP CAM
1A
E
E
BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED
MAESTRO RR MODULE
MAINHARNESS
RCA CABLES
WIRES FROMVEHICLE
GMS05+ T-HARNESS
FACTORY RADIO HARNESS
SPEAKER
WHITE
OR
WHITE/BLACKGRAYGRAY/BLACKGREENGREEN/BLACK
PURPLE/BLACKPURPLE
STEP 1
STEP 2
STEP 3
STEP 4
SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS
LF SPEAKER
RF SPEAKER
LR SPEAKER
RR SPEAKER
BROWN - MUTE (-)
CONNECT TOAFTERMARKET RADIO
CONNECT TO RADIO WITH LOW LEVEL OUTPUT:
CONNECT TO RADIO WITH HIGH LEVEL OUTPUT:
WIRING DIAGRAM with an Amplifier
STEERING WHEELCONTROL CABLE
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
gmc Yukon xl 2007-2011
Automotive Data Solutions Inc. © 2015 6
BACKUP CAMBACKUP CAM
CENTERCENTER
SUBSUB
B
C
A FG
C
AB
G
F
1B
E
E
STEP 1
BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)
MAINHARNESS
RCA CABLES
WIRES FROMVEHICLE
GMS05+ T-HARNESS
FACTORY RADIO HARNESS
(NOT CONNECTED)
(NOT CONNECTED)
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
STEP 2
STEP 3
STEP 4
SPEAKER
MAESTRO RR MODULE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED
BROWN - MUTE (-)
CONNECT TOAFTERMARKET RADIO
SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS
WIRING DIAGRAM without an Amplifier
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
STEERING WHEELCONTROL CABLE
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SR)-GMS05-AS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro GM5+ Installation Harness
INSTALL GUIDEGMC YUkON xL
WIThOUT NAv 2012-2014Retains steeRing wheel contRols, onstaR, bluetooth and moRe!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
gmc Yukon xl without nav 2012-2014
Automotive Data Solutions Inc. © 2015 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Before Installing 3
Installation Instructions 4
Wiring Diagram with an Amplifi er 5
Wiring Diagram without an Amplifi er 6
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
gmc Yukon xl without nav 2012-2014
Automotive Data Solutions Inc. © 2015 3
BEFORE INSTALLING STEP 1
DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:
METHOD 1: Look for the following logos in the vehicle. They are usually on the speaker covers or on the radio unit. If you fi nd any of the following logos Bose, Pioneer or Monsoon, you have a factory amplifi er.
METHOD 2: Look for the following sticker in the glove box. This sticker will indicate all the Regular Production Option (RPO) codes. If you fi nd any of the following codes UQA, UQS or UQG, you have a factory amplifi er.
STEP 2IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:
Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifi er and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits.
IF YOUR VEHICLE NOT IS EQUIPPED WITH A FACTORY AMPLIFIER:
Follow the installation instructions and complete the installation as shown in the wiring diagram without an amplifi er.
1
SERVICE PARTS IDENTIFICATION DO NOT REMOVE
AGI AG2 AJ1 AL0 AM7 AN3 AU0 AU3 A31 B30 B4UB58 B81 B82 CJ3 C49 C7H DF5 DK7 DL3 DT4 D07EVA E63 FF8 FF9 GT5 G80 JC4 KC4 KNP KUP K34K47 K68 LQ9 M32 NCI NEI NP3 NP5 OSG P30 QSSR4Y R9U R9Z SAF SLM TRB UC6 UK3 UQA U2K UFIUF3 UK3 VR4 VTV VXS V73 XSS X88 YD3 YD6 YE9YSS ZGC ZYI Z60 Z82 ISS ISZ 4IU 6YT 691 6927YT
BC/CC U 8555 692
143 5 FXWH2Q CKI57532GCEK19N031344764
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
gmc Yukon xl without nav 2012-2014
Automotive Data Solutions Inc. © 2015 4
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.
STEP 2
• Connect the factory harness to the GM5+ T-harness.
STEP 3• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
STEP 4• Connect all the harnesses to the Maestro RR module then
proceed to module setup.
The module is now ready to be used.
Insert the aftermarket radio in the dashboard housing and test all the functionalities.
Reassemble the dashboard carefully.
AMPLIFIER ONLYDETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS
• If your vehicle is equipped with a factory amplifi er you can connect the RCA wiring to the low level outputs of your aftermarket radio, or connect the level matching circuits to the speaker outputs of the aftermarket radio.
• If your aftermarket radio does not have low level outputs, has only a single RCA output, or the RCA output level is 2 volts or less then it is recommended to connect the level matching circuit to the speaker outputs. If the volume does not go loud enough using the RCA connections, the level matching circuits can be used.
• The internal amplifi er in some radios is not compatible with the level matching circuit. In these cases, there will be fl oor noise (hissing or buzzing at low levels) when the level matching circuit is connected. Change to the RCA connections to eliminate this noise.
TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
1
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
gmc Yukon xl without nav 2012-2014
Automotive Data Solutions Inc. © 2015 5
B
C
A FG
C
AB
G
F
CENTERCENTER
SUBSUB
BACKUP CAMBACKUP CAM
1A
E
E
BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED
MAESTRO RR MODULE
MAINHARNESS
RCA CABLES
WIRES FROMVEHICLE
GMS05+ T-HARNESS
FACTORY RADIO HARNESS
SPEAKER
WHITE
OR
WHITE/BLACKGRAYGRAY/BLACKGREENGREEN/BLACK
PURPLE/BLACKPURPLE
STEP 1
STEP 2
STEP 3
STEP 4
SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS
LF SPEAKER
RF SPEAKER
LR SPEAKER
RR SPEAKER
BROWN - MUTE (-)
CONNECT TOAFTERMARKET RADIO
CONNECT TO RADIO WITH LOW LEVEL OUTPUT:
CONNECT TO RADIO WITH HIGH LEVEL OUTPUT:
WIRING DIAGRAM with an Amplifier
STEERING WHEELCONTROL CABLE
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
gmc Yukon xl without nav 2012-2014
Automotive Data Solutions Inc. © 2015 6
BACKUP CAMBACKUP CAM
CENTERCENTER
SUBSUB
B
C
A FG
C
AB
G
F
1B
E
E
STEP 1
BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)
MAINHARNESS
RCA CABLES
WIRES FROMVEHICLE
GMS05+ T-HARNESS
FACTORY RADIO HARNESS
(NOT CONNECTED)
(NOT CONNECTED)
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
STEP 2
STEP 3
STEP 4
SPEAKER
MAESTRO RR MODULE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED
BROWN - MUTE (-)
CONNECT TOAFTERMARKET RADIO
SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS
WIRING DIAGRAM without an Amplifier
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
STEERING WHEELCONTROL CABLE
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SR)-GMS05-AS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro GM5+ Installation Harness
INSTALL GUIDEGMC YUkON
WIThOUT NAv 2012-2014Retains steeRing wheel contRols, onstaR, bluetooth and moRe!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
gmc Yukon without nav 2012-2014
Automotive Data Solutions Inc. © 2015 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Before Installing 3
Installation Instructions 4
Wiring Diagram with an Amplifi er 5
Wiring Diagram without an Amplifi er 6
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
gmc Yukon without nav 2012-2014
Automotive Data Solutions Inc. © 2015 3
BEFORE INSTALLING STEP 1
DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:
METHOD 1: Look for the following logos in the vehicle. They are usually on the speaker covers or on the radio unit. If you fi nd any of the following logos Bose, Pioneer or Monsoon, you have a factory amplifi er.
METHOD 2: Look for the following sticker in the glove box. This sticker will indicate all the Regular Production Option (RPO) codes. If you fi nd any of the following codes UQA, UQS or UQG, you have a factory amplifi er.
STEP 2IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:
Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifi er and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits.
IF YOUR VEHICLE NOT IS EQUIPPED WITH A FACTORY AMPLIFIER:
Follow the installation instructions and complete the installation as shown in the wiring diagram without an amplifi er.
1
SERVICE PARTS IDENTIFICATION DO NOT REMOVE
AGI AG2 AJ1 AL0 AM7 AN3 AU0 AU3 A31 B30 B4UB58 B81 B82 CJ3 C49 C7H DF5 DK7 DL3 DT4 D07EVA E63 FF8 FF9 GT5 G80 JC4 KC4 KNP KUP K34K47 K68 LQ9 M32 NCI NEI NP3 NP5 OSG P30 QSSR4Y R9U R9Z SAF SLM TRB UC6 UK3 UQA U2K UFIUF3 UK3 VR4 VTV VXS V73 XSS X88 YD3 YD6 YE9YSS ZGC ZYI Z60 Z82 ISS ISZ 4IU 6YT 691 6927YT
BC/CC U 8555 692
143 5 FXWH2Q CKI57532GCEK19N031344764
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
gmc Yukon without nav 2012-2014
Automotive Data Solutions Inc. © 2015 4
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.
STEP 2
• Connect the factory harness to the GM5+ T-harness.
STEP 3• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
STEP 4• Connect all the harnesses to the Maestro RR module then
proceed to module setup.
The module is now ready to be used.
Insert the aftermarket radio in the dashboard housing and test all the functionalities.
Reassemble the dashboard carefully.
AMPLIFIER ONLYDETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS
• If your vehicle is equipped with a factory amplifi er you can connect the RCA wiring to the low level outputs of your aftermarket radio, or connect the level matching circuits to the speaker outputs of the aftermarket radio.
• If your aftermarket radio does not have low level outputs, has only a single RCA output, or the RCA output level is 2 volts or less then it is recommended to connect the level matching circuit to the speaker outputs. If the volume does not go loud enough using the RCA connections, the level matching circuits can be used.
• The internal amplifi er in some radios is not compatible with the level matching circuit. In these cases, there will be fl oor noise (hissing or buzzing at low levels) when the level matching circuit is connected. Change to the RCA connections to eliminate this noise.
TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
1
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
gmc Yukon without nav 2012-2014
Automotive Data Solutions Inc. © 2015 5
B
C
A FG
C
AB
G
F
CENTERCENTER
SUBSUB
BACKUP CAMBACKUP CAM
1A
E
E
BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED
MAESTRO RR MODULE
MAINHARNESS
RCA CABLES
WIRES FROMVEHICLE
GMS05+ T-HARNESS
FACTORY RADIO HARNESS
SPEAKER
WHITE
OR
WHITE/BLACKGRAYGRAY/BLACKGREENGREEN/BLACK
PURPLE/BLACKPURPLE
STEP 1
STEP 2
STEP 3
STEP 4
SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS
LF SPEAKER
RF SPEAKER
LR SPEAKER
RR SPEAKER
BROWN - MUTE (-)
CONNECT TOAFTERMARKET RADIO
CONNECT TO RADIO WITH LOW LEVEL OUTPUT:
CONNECT TO RADIO WITH HIGH LEVEL OUTPUT:
WIRING DIAGRAM with an Amplifier
STEERING WHEELCONTROL CABLE
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
gmc Yukon without nav 2012-2014
Automotive Data Solutions Inc. © 2015 6
BACKUP CAMBACKUP CAM
CENTERCENTER
SUBSUB
B
C
A FG
C
AB
G
F
1B
E
E
STEP 1
BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)
MAINHARNESS
RCA CABLES
WIRES FROMVEHICLE
GMS05+ T-HARNESS
FACTORY RADIO HARNESS
(NOT CONNECTED)
(NOT CONNECTED)
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
STEP 2
STEP 3
STEP 4
SPEAKER
MAESTRO RR MODULE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED
BROWN - MUTE (-)
CONNECT TOAFTERMARKET RADIO
SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS
WIRING DIAGRAM without an Amplifier
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
STEERING WHEELCONTROL CABLE
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SR)-GMS05-AS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro GM5+ Installation Harness
INSTALL GUIDEhUMMER h2 2008-2009
Retains steeRing wheel contRols, onstaR, bluetooth and moRe!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
hummeR h2 2008-2009
Automotive Data Solutions Inc. © 2015 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Before Installing 3
Installation Instructions 4
Wiring Diagram with an Amplifi er 5
Wiring Diagram without an Amplifi er 6
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
hummeR h2 2008-2009
Automotive Data Solutions Inc. © 2015 3
BEFORE INSTALLING STEP 1
DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:
METHOD 1: Look for the following logos in the vehicle. They are usually on the speaker covers or on the radio unit. If you fi nd any of the following logos Bose, Pioneer or Monsoon, you have a factory amplifi er.
METHOD 2: Look for the following sticker in the glove box. This sticker will indicate all the Regular Production Option (RPO) codes. If you fi nd any of the following codes UQA, UQS or UQG, you have a factory amplifi er.
STEP 2IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:
Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifi er and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits.
IF YOUR VEHICLE NOT IS EQUIPPED WITH A FACTORY AMPLIFIER:
Follow the installation instructions and complete the installation as shown in the wiring diagram without an amplifi er.
1
SERVICE PARTS IDENTIFICATION DO NOT REMOVE
AGI AG2 AJ1 AL0 AM7 AN3 AU0 AU3 A31 B30 B4UB58 B81 B82 CJ3 C49 C7H DF5 DK7 DL3 DT4 D07EVA E63 FF8 FF9 GT5 G80 JC4 KC4 KNP KUP K34K47 K68 LQ9 M32 NCI NEI NP3 NP5 OSG P30 QSSR4Y R9U R9Z SAF SLM TRB UC6 UK3 UQA U2K UFIUF3 UK3 VR4 VTV VXS V73 XSS X88 YD3 YD6 YE9YSS ZGC ZYI Z60 Z82 ISS ISZ 4IU 6YT 691 6927YT
BC/CC U 8555 692
143 5 FXWH2Q CKI57532GCEK19N031344764
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
hummeR h2 2008-2009
Automotive Data Solutions Inc. © 2015 4
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.
STEP 2
• Connect the factory harness to the GM5+ T-harness.
STEP 3• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
STEP 4• Connect all the harnesses to the Maestro RR module then
proceed to module setup.
The module is now ready to be used.
Insert the aftermarket radio in the dashboard housing and test all the functionalities.
Reassemble the dashboard carefully.
AMPLIFIER ONLYDETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS
• If your vehicle is equipped with a factory amplifi er you can connect the RCA wiring to the low level outputs of your aftermarket radio, or connect the level matching circuits to the speaker outputs of the aftermarket radio.
• If your aftermarket radio does not have low level outputs, has only a single RCA output, or the RCA output level is 2 volts or less then it is recommended to connect the level matching circuit to the speaker outputs. If the volume does not go loud enough using the RCA connections, the level matching circuits can be used.
• The internal amplifi er in some radios is not compatible with the level matching circuit. In these cases, there will be fl oor noise (hissing or buzzing at low levels) when the level matching circuit is connected. Change to the RCA connections to eliminate this noise.
TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
1
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
hummeR h2 2008-2009
Automotive Data Solutions Inc. © 2015 5
B
C
A FG
C
AB
G
F
CENTERCENTER
SUBSUB
BACKUP CAMBACKUP CAM
1A
E
E
BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED
MAESTRO RR MODULE
MAINHARNESS
RCA CABLES
WIRES FROMVEHICLE
GMS05+ T-HARNESS
FACTORY RADIO HARNESS
SPEAKER
WHITE
OR
WHITE/BLACKGRAYGRAY/BLACKGREENGREEN/BLACK
PURPLE/BLACKPURPLE
STEP 1
STEP 2
STEP 3
STEP 4
SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS
LF SPEAKER
RF SPEAKER
LR SPEAKER
RR SPEAKER
BROWN - MUTE (-)
CONNECT TOAFTERMARKET RADIO
CONNECT TO RADIO WITH LOW LEVEL OUTPUT:
CONNECT TO RADIO WITH HIGH LEVEL OUTPUT:
WIRING DIAGRAM with an Amplifier
STEERING WHEELCONTROL CABLE
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
hummeR h2 2008-2009
Automotive Data Solutions Inc. © 2015 6
BACKUP CAMBACKUP CAM
CENTERCENTER
SUBSUB
B
C
A FG
C
AB
G
F
1B
E
E
STEP 1
BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)
MAINHARNESS
RCA CABLES
WIRES FROMVEHICLE
GMS05+ T-HARNESS
FACTORY RADIO HARNESS
(NOT CONNECTED)
(NOT CONNECTED)
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
STEP 2
STEP 3
STEP 4
SPEAKER
MAESTRO RR MODULE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED
BROWN - MUTE (-)
CONNECT TOAFTERMARKET RADIO
SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS
WIRING DIAGRAM without an Amplifier
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
STEERING WHEELCONTROL CABLE
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SR)-GMS05-AS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro GM5+ Installation Harness
INSTALL GUIDESATURN OUTLOOk
2007-2010Retains steeRing wheel contRols, onstaR, bluetooth and moRe!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
satuRn outlook 2007-2010
Automotive Data Solutions Inc. © 2015 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Before Installing 3
Installation Instructions 4
Wiring Diagram with an Amplifi er 5
Wiring Diagram without an Amplifi er 6
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
satuRn outlook 2007-2010
Automotive Data Solutions Inc. © 2015 3
BEFORE INSTALLING STEP 1
DETERMINE IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:
METHOD 1: Look for the following logos in the vehicle. They are usually on the speaker covers or on the radio unit. If you fi nd any of the following logos Bose, Pioneer or Monsoon, you have a factory amplifi er.
METHOD 2: Look for the following sticker in the glove box. This sticker will indicate all the Regular Production Option (RPO) codes. If you fi nd any of the following codes UQA, UQS or UQG, you have a factory amplifi er.
STEP 2IF YOUR VEHICLE IS EQUIPPED WITH A FACTORY AMPLIFIER:
Follow the installation instructions and complete the installation as shown in the wiring diagram with an amplifi er and read the “AMPLIFIER ONLY” note to determine if you should use rca’s or level matching circuits.
IF YOUR VEHICLE NOT IS EQUIPPED WITH A FACTORY AMPLIFIER:
Follow the installation instructions and complete the installation as shown in the wiring diagram without an amplifi er.
1
SERVICE PARTS IDENTIFICATION DO NOT REMOVE
AGI AG2 AJ1 AL0 AM7 AN3 AU0 AU3 A31 B30 B4UB58 B81 B82 CJ3 C49 C7H DF5 DK7 DL3 DT4 D07EVA E63 FF8 FF9 GT5 G80 JC4 KC4 KNP KUP K34K47 K68 LQ9 M32 NCI NEI NP3 NP5 OSG P30 QSSR4Y R9U R9Z SAF SLM TRB UC6 UK3 UQA U2K UFIUF3 UK3 VR4 VTV VXS V73 XSS X88 YD3 YD6 YE9YSS ZGC ZYI Z60 Z82 ISS ISZ 4IU 6YT 691 6927YT
BC/CC U 8555 692
143 5 FXWH2Q CKI57532GCEK19N031344764
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
satuRn outlook 2007-2010
Automotive Data Solutions Inc. © 2015 4
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Connect the wires shown on the next page from aftermarket radio main harness to the GM5+ T-harness and match the wire functions.
STEP 2
• Connect the factory harness to the GM5+ T-harness.
STEP 3• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
STEP 4• Connect all the harnesses to the Maestro RR module then
proceed to module setup.
The module is now ready to be used.
Insert the aftermarket radio in the dashboard housing and test all the functionalities.
Reassemble the dashboard carefully.
AMPLIFIER ONLYDETERMINE IF YOU SHOULD USE RCA’S OR LEVEL MATCHING CIRCUITS
• If your vehicle is equipped with a factory amplifi er you can connect the RCA wiring to the low level outputs of your aftermarket radio, or connect the level matching circuits to the speaker outputs of the aftermarket radio.
• If your aftermarket radio does not have low level outputs, has only a single RCA output, or the RCA output level is 2 volts or less then it is recommended to connect the level matching circuit to the speaker outputs. If the volume does not go loud enough using the RCA connections, the level matching circuits can be used.
• The internal amplifi er in some radios is not compatible with the level matching circuit. In these cases, there will be fl oor noise (hissing or buzzing at low levels) when the level matching circuit is connected. Change to the RCA connections to eliminate this noise.
TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
1
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
satuRn outlook 2007-2010
Automotive Data Solutions Inc. © 2015 5
B
C
A FG
C
AB
G
F
CENTERCENTER
SUBSUB
BACKUP CAMBACKUP CAM
1A
E
E
BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED
MAESTRO RR MODULE
MAINHARNESS
RCA CABLES
WIRES FROMVEHICLE
GMS05+ T-HARNESS
FACTORY RADIO HARNESS
SPEAKER
WHITE
OR
WHITE/BLACKGRAYGRAY/BLACKGREENGREEN/BLACK
PURPLE/BLACKPURPLE
STEP 1
STEP 2
STEP 3
STEP 4
SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS
LF SPEAKER
RF SPEAKER
LR SPEAKER
RR SPEAKER
BROWN - MUTE (-)
CONNECT TOAFTERMARKET RADIO
CONNECT TO RADIO WITH LOW LEVEL OUTPUT:
CONNECT TO RADIO WITH HIGH LEVEL OUTPUT:
WIRING DIAGRAM with an Amplifier
STEERING WHEELCONTROL CABLE
ADS-RR(SR)-GMS05-AS maestro.idatalink.com
satuRn outlook 2007-2010
Automotive Data Solutions Inc. © 2015 6
BACKUP CAMBACKUP CAM
CENTERCENTER
SUBSUB
B
C
A FG
C
AB
G
F
1B
E
E
STEP 1
BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)
MAINHARNESS
RCA CABLES
WIRES FROMVEHICLE
GMS05+ T-HARNESS
FACTORY RADIO HARNESS
(NOT CONNECTED)
(NOT CONNECTED)
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
STEP 2
STEP 3
STEP 4
SPEAKER
MAESTRO RR MODULE
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED
BROWN - MUTE (-)
CONNECT TOAFTERMARKET RADIO
SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS
WIRING DIAGRAM without an Amplifier
CUT AND REMOVE THE SPEAKER WIRE JUNCTION CONNECTORS
STEERING WHEELCONTROL CABLE