how to use this install guide - staub electronics ltd. · 2017. 11. 6. · optional accessories...
TRANSCRIPT
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
WARNING Pressing the printer icon or “quick printing” this document will print
all of the guides in this compilation.
Open the Bookmarks menu and find your vehicle OR scroll down until you find the install guide for your vehicle.
Print only the pages for your vehicle using the advanced options in the Print menu.
Install your DSR1 module according to the guide for your vehicle.
HOW TO USE THIS INSTALL GUIDE1
2
3
SELECT VEHICLE PRINT PAGES NEEDED
OPTIONAL ACCESSORIES
PROGRAMMED FIRMWAREADS-DSR1-CHR03
PRODUCTS REQUIREDRockford Fosgate DSR1iDatalink Maestro aCH3 Installation Harness
INSTALL GUIDECHRySLER 300
WITH HARMAN KARDON 2012-2016ENABLE A SEAMLESS AFTERMARKET AMPLIFIER INSTALLATION,
WITHOUT CHANGING YOUR RADIO.
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-DSR1-CHR03 maestro.idatalink.com
CHRYSLER 300 WITH HARMAN KARDON 2012-2016
Automotive Data Solutions Inc. © 2017 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro / Rockford Fosgate DSR1 Amplifi er replacement solution. You are now a few simple steps away from enjoying your new car amplifi er. Before starting your installation, please ensure that your module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Vehicle Wire Reference Chart 5
ADS-DSR1-CHR03 maestro.idatalink.com
CHRYSLER 300 WITH HARMAN KARDON 2012-2016
Automotive Data Solutions Inc. © 2017 3
INSTALLATION INSTRUCTIONS STEP 1
• Remove the factory amplifi er (refer to wire chart for amplifi er location).
• Confi gure the 2 pin connectors on the aCH3 T-harness as shown on the wiring diagram.
STEP 2• Connect the factory amplifi er harnesses to the aCH3
T-harness.
STEP 3• Connect the wires from the aCH3 T-harness to the
aftermarket amplifi er.
Note 1:
If you are running your own speaker wires from the amplifi er to the speakers, this step is not necessary.
Note 2:
The amplifi er output colors and labels on the aCH3 T-harness do not correspond to the vehicle. For vehicle specifi c wiring designation, see the wiring chart.
• Plug the RCA cables in the aftermarket amplifi er.
STEP 4• Connect all the harnesses to the DSR1 module.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
1
ADS-DSR1-CHR03 maestro.idatalink.com
CHRYSLER 300 WITH HARMAN KARDON 2012-2016
Automotive Data Solutions Inc. © 2017 4
LEFT FRONT 1
RIGHT FRONT 1
LEFT REAR 1
RIGHT REAR 1
LEFT FRONT 2
RIGHT FRONT 2
LEFT REAR 2
RIGHT REAR 2
SUB 1
CENTER 1
LEFT REAR 3
RIGHT REAR 3
1
LEFT FRONT OUT 1LEFT FRONT OUT 1
RIGHT FRONT OUT 2RIGHT FRONT OUT 2
LEFT SPARE OUT 3LEFT SPARE OUT 3
RIGHT SPARE OUT 4RIGHT SPARE OUT 4
LEFT REAR OUT 5LEFT REAR OUT 5
RIGHT REAR OUT 6RIGHT REAR OUT 6
LEFT SUB OUT 7LEFT SUB OUT 7
RIGHT SUB OUT 8RIGHT SUB OUT 8
CONNECTIONS NOT REQUIRED
WIRING DIAGRAM
STEP 1
STEP 2STEP 3
aCH3 T-HARNESS
FACTORY AMPLIFIERHARNESSES
AMPLIFIER
WIRES FROMVEHICLE
WHITEWHITE
GREENGREEN
GRAYGRAY
BLUE
PURPLEPURPLE
REDN.C.
N.C.
STEP 4DSR1 MODULE
RCA CABLES
WHITEWHITE/BLACK
GRAYGRAY/BLACK
GREENGREEN/BLACK
PURPLE/BLACK
GRAY/RED
WHITE/REDGRAY
GREENGREEN/RED
PURPLE
WHITE
PURPLE
PURPLE/REDBLACK
BLACK/WHITE
ORANGEORANGE/BLACK
GREEN/WHITEGREEN
PURPLEPURPLE/WHITE
ADS-DSR1-CHR03 maestro.idatalink.com
CHRYSLER 300 WITH HARMAN KARDON 2012-2016
Automotive Data Solutions Inc. © 2017 5
1
2
3
4
5
6
7
8
910
11
12
13
14
15
16
17
18
1
2
5
6
7
8
910
11
12
1315
VEHICLE WIRE REFERENCE CHART
T-Harness Wires Vehicle Wires
WireTag
WireColor Speaker Wire Description Component
Position
LEFT FRONT 1 White Left Front Door Speaker (+)
1White/Black Left Front Door Speaker (-)
LEFT FRONT 2White Left Front Tweeter on Dash (+)
5White/Red Left Front Tweeter on Dash (-)
RIGHT FRONT 1 Gray Right Front Door Speaker (+)
2Gray/Black Right Front Door Speaker (-)
RIGHT FRONT 2Gray/Red Right Front Tweeter on Dash (+)
6Gray Right Front Tweeter on Dash (-)
LEFT REAR 1 Green/Black Left Rear Door Speaker (+)
8Green Left Rear Door Speaker (-)
LEFT REAR 2Green/Red Left Rear Shelf Speaker (+)
12Green Left Rear Shelf Speaker (-)
LEFT REAR 3Green/White Left Rear Tweeter (+)
11Green Left Rear Tweeter (-)
RIGHT REAR 1Purple Right Rear Door Speaker (+)
9Purple/Black Right Rear Door Speaker (-)
RIGHT REAR 2Purple Right Rear Tweeter (+)
10Purple/Red Right Rear Tweeter (-)
RIGHT REAR 3Purple Right Rear Shelf Speaker (+)
13Purple/White Right Rear Shelf Speaker (-)
CENTER 1Orange Center (+)
7Orange/Black Center (-)
SUB 1Black/White Subwoofer (+)
15Black Subwoofer (-)
Amplifi er location: Left end of dash
Note: The amplifi er output colors and labels on the AR-CH3 T-harness do not correspond to the vehicle. For vehicle specifi c wiring designation, follow this wiring chart.
OPTIONAL ACCESSORIES
PROGRAMMED FIRMWAREADS-DSR1-CHR03
PRODUCTS REQUIREDRockford Fosgate DSR1iDatalink Maestro aCH3 Installation Harness
INSTALL GUIDEDODGE CHALLENGER
WITH HARMAN KARDON 2012-2015ENABLE A SEAMLESS AFTERMARKET AMPLIFIER INSTALLATION,
WITHOUT CHANGING YOUR RADIO.
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-DSR1-CHR03 maestro.idatalink.com
DODGE CHALLENGER WITH HARMAN KARDON 2012-2015
Automotive Data Solutions Inc. © 2017 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro / Rockford Fosgate DSR1 Amplifi er replacement solution. You are now a few simple steps away from enjoying your new car amplifi er. Before starting your installation, please ensure that your module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Vehicle Wire Reference Chart 5
ADS-DSR1-CHR03 maestro.idatalink.com
DODGE CHALLENGER WITH HARMAN KARDON 2012-2015
Automotive Data Solutions Inc. © 2017 3
INSTALLATION INSTRUCTIONS STEP 1
• Remove the factory amplifi er (refer to wire chart for amplifi er location).
• Confi gure the 2 pin connectors on the aCH3 T-harness as shown on the wiring diagram.
STEP 2• Connect the factory amplifi er harnesses to the aCH3
T-harness.
STEP 3• Connect the wires from the aCH3 T-harness to the
aftermarket amplifi er.
Note 1:
If you are running your own speaker wires from the amplifi er to the speakers, this step is not necessary.
Note 2:
The amplifi er output colors and labels on the aCH3 T-harness do not correspond to the vehicle. For vehicle specifi c wiring designation, see the wiring chart.
• Plug the RCA cables in the aftermarket amplifi er.
STEP 4• Connect all the harnesses to the DSR1 module.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
1
ADS-DSR1-CHR03 maestro.idatalink.com
DODGE CHALLENGER WITH HARMAN KARDON 2012-2015
Automotive Data Solutions Inc. © 2017 4
LEFT FRONT 1
RIGHT FRONT 1
LEFT REAR 1
RIGHT REAR 1
LEFT FRONT 2
RIGHT FRONT 2
LEFT REAR 2
RIGHT REAR 2
SUB 1
CENTER 1
LEFT REAR 3
RIGHT REAR 3
1
LEFT FRONT OUT 1LEFT FRONT OUT 1
RIGHT FRONT OUT 2RIGHT FRONT OUT 2
LEFT SPARE OUT 3LEFT SPARE OUT 3
RIGHT SPARE OUT 4RIGHT SPARE OUT 4
LEFT REAR OUT 5LEFT REAR OUT 5
RIGHT REAR OUT 6RIGHT REAR OUT 6
LEFT SUB OUT 7LEFT SUB OUT 7
RIGHT SUB OUT 8RIGHT SUB OUT 8
CONNECTIONS NOT REQUIRED
WIRING DIAGRAM
STEP 1
STEP 2STEP 3
aCH3 T-HARNESS
FACTORY AMPLIFIERHARNESSES
AMPLIFIER
WIRES FROMVEHICLE
WHITEWHITE
GREENGREEN
GRAYGRAY
BLUE
PURPLEPURPLE
REDN.C.
N.C.
STEP 4DSR1 MODULE
RCA CABLES
WHITEWHITE/BLACK
GRAYGRAY/BLACK
GREENGREEN/BLACK
PURPLE/BLACK
GRAY/RED
WHITE/REDGRAY
GREENGREEN/RED
PURPLE
WHITE
PURPLE
PURPLE/REDBLACK
BLACK/WHITE
ORANGEORANGE/BLACK
GREEN/WHITEGREEN
PURPLEPURPLE/WHITE
ADS-DSR1-CHR03 maestro.idatalink.com
DODGE CHALLENGER WITH HARMAN KARDON 2012-2015
Automotive Data Solutions Inc. © 2017 5
1
2
3
4
5
6
7
8
910
11
12
13
14
15
16
17
18
1
2
5
6
7
8
10
11
15
17
VEHICLE WIRE REFERENCE CHART
T-Harness Wires Vehicle Wires
WireTag
WireColor Speaker Wire Description Component
Position
LEFT FRONT 1 White Left Front Door Speaker (+)
1White/Black Left Front Door Speaker (-)
LEFT FRONT 2White Left Front Tweeter on Dash (+)
5White/Red Left Front Tweeter on Dash (-)
RIGHT FRONT 1 Gray Right Front Door Speaker (+)
2Gray/Black Right Front Door Speaker (-)
RIGHT FRONT 2Gray/Red Right Front Tweeter on Dash (+)
6Gray Right Front Tweeter on Dash (-)
LEFT REAR 1 Green/Black Left Rear Door Tweeter (+)
11Green Left Rear Door Tweeter (-)
LEFT REAR 2Green/Red Subwoofer 1 (+)
17Green Subwoofer 1 (-)
LEFT REAR 3Green/White Left Rear Door Speaker (+)
8Green Left Rear Door Speaker (-)
RIGHT REAR 1Purple Right Rear Tweeter (+)
10Purple/Black Right Rear Tweeter (-)
RIGHT REAR 2Purple Right Rear Door Speaker (+)
10Purple/Red Right Rear Door Speaker (-)
RIGHT REAR 3Purple Subwoofer 2 (+)
17Purple/White Subwoofer 2 (-)
CENTER 1Orange Center (+)
7Orange/Black Center (-)
SUB 1Black/White Subwoofer 3 (+)
15Black Subwoofer 3 (-)
Amplifi er location: Driver kick panel
Note: The amplifi er output colors and labels on the AR-CH3 T-harness do not correspond to the vehicle. For vehicle specifi c wiring designation, follow this wiring chart.
OPTIONAL ACCESSORIES
PROGRAMMED FIRMWAREADS-DSR1-CHR03
PRODUCTS REQUIREDRockford Fosgate DSR1iDatalink Maestro aCH3 Installation Harness
INSTALL GUIDEDODGE CHARGER
WITH HARMAN KARDON 2012-2015ENABLE A SEAMLESS AFTERMARKET AMPLIFIER INSTALLATION,
WITHOUT CHANGING YOUR RADIO.
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-DSR1-CHR03 maestro.idatalink.com
DODGE CHARGER WITH HARMAN KARDON 2012-2015
Automotive Data Solutions Inc. © 2017 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro / Rockford Fosgate DSR1 Amplifi er replacement solution. You are now a few simple steps away from enjoying your new car amplifi er. Before starting your installation, please ensure that your module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Vehicle Wire Reference Chart 5
ADS-DSR1-CHR03 maestro.idatalink.com
DODGE CHARGER WITH HARMAN KARDON 2012-2015
Automotive Data Solutions Inc. © 2017 3
INSTALLATION INSTRUCTIONS STEP 1
• Remove the factory amplifi er (refer to wire chart for amplifi er location).
• Confi gure the 2 pin connectors on the aCH3 T-harness as shown on the wiring diagram.
STEP 2• Connect the factory amplifi er harnesses to the aCH3
T-harness.
STEP 3• Connect the wires from the aCH3 T-harness to the
aftermarket amplifi er.
Note 1:
If you are running your own speaker wires from the amplifi er to the speakers, this step is not necessary.
Note 2:
The amplifi er output colors and labels on the aCH3 T-harness do not correspond to the vehicle. For vehicle specifi c wiring designation, see the wiring chart.
• Plug the RCA cables in the aftermarket amplifi er.
STEP 4• Connect all the harnesses to the DSR1 module.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
1
ADS-DSR1-CHR03 maestro.idatalink.com
DODGE CHARGER WITH HARMAN KARDON 2012-2015
Automotive Data Solutions Inc. © 2017 4
LEFT FRONT 1
RIGHT FRONT 1
LEFT REAR 1
RIGHT REAR 1
LEFT FRONT 2
RIGHT FRONT 2
LEFT REAR 2
RIGHT REAR 2
SUB 1
CENTER 1
LEFT REAR 3
RIGHT REAR 3
1
LEFT FRONT OUT 1LEFT FRONT OUT 1
RIGHT FRONT OUT 2RIGHT FRONT OUT 2
LEFT SPARE OUT 3LEFT SPARE OUT 3
RIGHT SPARE OUT 4RIGHT SPARE OUT 4
LEFT REAR OUT 5LEFT REAR OUT 5
RIGHT REAR OUT 6RIGHT REAR OUT 6
LEFT SUB OUT 7LEFT SUB OUT 7
RIGHT SUB OUT 8RIGHT SUB OUT 8
CONNECTIONS NOT REQUIRED
WIRING DIAGRAM
STEP 1
STEP 2STEP 3
aCH3 T-HARNESS
FACTORY AMPLIFIERHARNESSES
AMPLIFIER
WIRES FROMVEHICLE
WHITEWHITE
GREENGREEN
GRAYGRAY
BLUE
PURPLEPURPLE
REDN.C.
N.C.
STEP 4DSR1 MODULE
RCA CABLES
WHITEWHITE/BLACK
GRAYGRAY/BLACK
GREENGREEN/BLACK
PURPLE/BLACK
GRAY/RED
WHITE/REDGRAY
GREENGREEN/RED
PURPLE
WHITE
PURPLE
PURPLE/REDBLACK
BLACK/WHITE
ORANGEORANGE/BLACK
GREEN/WHITEGREEN
PURPLEPURPLE/WHITE
ADS-DSR1-CHR03 maestro.idatalink.com
DODGE CHARGER WITH HARMAN KARDON 2012-2015
Automotive Data Solutions Inc. © 2017 5
1
2
3
4
5
6
7
8
910
11
12
13
14
15
16
17
18
1
2
5
6
7
8
910
11
12
1315
VEHICLE WIRE REFERENCE CHART
T-Harness Wires Vehicle Wires
WireTag
WireColor Speaker Wire Description Component
Position
LEFT FRONT 1 White Left Front Door Speaker (+)
1White/Black Left Front Door Speaker (-)
LEFT FRONT 2White Left Front Tweeter on Dash (+)
5White/Red Left Front Tweeter on Dash (-)
RIGHT FRONT 1 Gray Right Front Door Speaker (+)
2Gray/Black Right Front Door Speaker (-)
RIGHT FRONT 2Gray/Red Right Front Tweeter on Dash (+)
6Gray Right Front Tweeter on Dash (-)
LEFT REAR 1 Green/Black Left Rear Door Speaker (+)
8Green Left Rear Door Speaker (-)
LEFT REAR 2Green/Red Left Rear Shelf Speaker (+)
12Green Left Rear Shelf Speaker (-)
LEFT REAR 3Green/White Left Rear Tweeter (+)
11Green Left Rear Tweeter (-)
RIGHT REAR 1Purple Right Rear Door Speaker (+)
9Purple/Black Right Rear Door Speaker (-)
RIGHT REAR 2Purple Right Rear Tweeter (+)
10Purple/Red Right Rear Tweeter (-)
RIGHT REAR 3Purple Right Rear Shelf Speaker (+)
13Purple/White Right Rear Shelf Speaker (-)
CENTER 1Orange Center (+)
7Orange/Black Center (-)
SUB 1Black/White Subwoofer (+)
15Black Subwoofer (-)
Amplifi er location: Left end of dash
Note: The amplifi er output colors and labels on the AR-CH3 T-harness do not correspond to the vehicle. For vehicle specifi c wiring designation, follow this wiring chart.
OPTIONAL ACCESSORIES
PROGRAMMED FIRMWAREADS-DSR1-CHR03
PRODUCTS REQUIREDRockford Fosgate DSR1iDatalink Maestro aCH3 Installation Harness
INSTALL GUIDEFIAT 500X 2016-2017
ENABLE A SEAMLESS AFTERMARKET AMPLIFIER INSTALLATION,WITHOUT CHANGING YOUR RADIO.
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-DSR1-CHR03 maestro.idatalink.com
FIAT 500X 2016-2017
Automotive Data Solutions Inc. © 2017 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro / Rockford Fosgate DSR1 Amplifi er replacement solution. You are now a few simple steps away from enjoying your new car amplifi er. Before starting your installation, please ensure that your module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Vehicle Wire Reference Chart 5
ADS-DSR1-CHR03 maestro.idatalink.com
FIAT 500X 2016-2017
Automotive Data Solutions Inc. © 2017 3
INSTALLATION INSTRUCTIONS STEP 1
• Remove the factory amplifi er (refer to wire chart for amplifi er location).
• Confi gure the 2 pin connectors on the aCH3 T-harness as shown on the wiring diagram.
STEP 2• Connect the factory amplifi er harnesses to the aCH3
T-harness.
STEP 3• Connect the wires from the aCH3 T-harness to the
aftermarket amplifi er.
Note 1:
If you are running your own speaker wires from the amplifi er to the speakers, this step is not necessary.
Note 2:
The amplifi er output colors and labels on the aCH3 T-harness do not correspond to the vehicle. For vehicle specifi c wiring designation, see the wiring chart.
• Plug the RCA cables in the aftermarket amplifi er.
STEP 4• Connect all the harnesses to the DSR1 module.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
1
ADS-DSR1-CHR03 maestro.idatalink.com
FIAT 500X 2016-2017
Automotive Data Solutions Inc. © 2017 4
LEFT FRONT 1
RIGHT FRONT 1
LEFT REAR 1
RIGHT REAR 1
LEFT FRONT 2
RIGHT FRONT 2
LEFT REAR 2
RIGHT REAR 2
SUB 1
CENTER 1
LEFT REAR 3
RIGHT REAR 3
1
LEFT FRONT OUT 1LEFT FRONT OUT 1
RIGHT FRONT OUT 2RIGHT FRONT OUT 2
LEFT SPARE OUT 3LEFT SPARE OUT 3
RIGHT SPARE OUT 4RIGHT SPARE OUT 4
LEFT REAR OUT 5LEFT REAR OUT 5
RIGHT REAR OUT 6RIGHT REAR OUT 6
LEFT SUB OUT 7LEFT SUB OUT 7
RIGHT SUB OUT 8RIGHT SUB OUT 8
CONNECTIONS NOT REQUIRED
WIRING DIAGRAM
STEP 1
STEP 2STEP 3
aCH3 T-HARNESS
FACTORY AMPLIFIERHARNESSES
AMPLIFIER
WIRES FROMVEHICLE
WHITEWHITE
GREENGREEN
GRAYGRAY
BLUE
PURPLEPURPLE
REDN.C.
N.C.
STEP 4DSR1 MODULE
RCA CABLES
WHITEWHITE/BLACK
GRAYGRAY/BLACK
GREENGREEN/BLACK
PURPLE/BLACK
GRAY/RED
WHITE/REDGRAY
GREENGREEN/RED
PURPLE
WHITE
PURPLE
PURPLE/REDBLACK
BLACK/WHITE
ORANGEORANGE/BLACK
GREEN/WHITEGREEN
PURPLEPURPLE/WHITE
ADS-DSR1-CHR03 maestro.idatalink.com
FIAT 500X 2016-2017
Automotive Data Solutions Inc. © 2017 5
1
2
3
4
5
6
7
8
910
11
12
13
14
15
16
17
18
13
6
7
9
12
15
VEHICLE WIRE REFERENCE CHART
T-Harness Wires Vehicle Wires
WireTag
WireColor Speaker Wire Description Component
Position
LEFT FRONT 1 White Right Front Door Speaker (+)
6White/Black Right Front Door Speaker (-)
LEFT FRONT 2White Left Front Tweeter (+)
3White/Red Left Front Tweeter (-)
RIGHT FRONT 1 Gray Left Front Door Speaker (+)
1Gray/Black Left Front Door Speaker (-)
RIGHT FRONT 2Gray/Red Right Front Tweeter (+)
6Gray Right Front Tweeter (-)
LEFT REAR 1 Green/Black n/a
Green n/a
LEFT REAR 2Green/Red Left Rear Door Speaker (+)
12Green Left Rear Door Speaker (-)
LEFT REAR 3Green/White n/a
Green n/a
RIGHT REAR 1Purple Subwoofer 2 (+)
9Purple/Black Subwoofer 2 (-)
RIGHT REAR 2Purple n/a
Purple/Red n/a
RIGHT REAR 3Purple n/a
Purple/White n/a
CENTER 1Orange Right Rear Door Speaker (+)
7Orange/Black Right Rear Door Speaker (-)
SUB 1Black/White Subwoofer 1 (+)
15Black Subwoofer 1 (-)
Amplifi er location: Rear left quarter panel
Note: The amplifi er output colors and labels on the AR-CH3 T-harness do not correspond to the vehicle. For vehicle specifi c wiring designation, follow this wiring chart.
OPTIONAL ACCESSORIES
PROGRAMMED FIRMWAREADS-DSR1-CHR03
PRODUCTS REQUIREDRockford Fosgate DSR1iDatalink Maestro aCH3 Installation Harness
INSTALL GUIDEJEEP GRAND CHEROKEE
WITH HARMAN KARDON 2014ENABLE A SEAMLESS AFTERMARKET AMPLIFIER INSTALLATION,
WITHOUT CHANGING YOUR RADIO.
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-DSR1-CHR03 maestro.idatalink.com
JEEP GRAND CHEROKEE WITH HARMAN KARDON 2014
Automotive Data Solutions Inc. © 2017 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro / Rockford Fosgate DSR1 Amplifi er replacement solution. You are now a few simple steps away from enjoying your new car amplifi er. Before starting your installation, please ensure that your module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Vehicle Wire Reference Chart 5
ADS-DSR1-CHR03 maestro.idatalink.com
JEEP GRAND CHEROKEE WITH HARMAN KARDON 2014
Automotive Data Solutions Inc. © 2017 3
INSTALLATION INSTRUCTIONS STEP 1
• Remove the factory amplifi er (refer to wire chart for amplifi er location).
• Confi gure the 2 pin connectors on the aCH3 T-harness as shown on the wiring diagram.
STEP 2• Connect the factory amplifi er harnesses to the aCH3
T-harness.
STEP 3• Connect the wires from the aCH3 T-harness to the
aftermarket amplifi er.
Note 1:
If you are running your own speaker wires from the amplifi er to the speakers, this step is not necessary.
Note 2:
The amplifi er output colors and labels on the aCH3 T-harness do not correspond to the vehicle. For vehicle specifi c wiring designation, see the wiring chart.
• Plug the RCA cables in the aftermarket amplifi er.
STEP 4• Connect all the harnesses to the DSR1 module.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
1
ADS-DSR1-CHR03 maestro.idatalink.com
JEEP GRAND CHEROKEE WITH HARMAN KARDON 2014
Automotive Data Solutions Inc. © 2017 4
LEFT FRONT 1
RIGHT FRONT 1
LEFT REAR 1
RIGHT REAR 1
LEFT FRONT 2
RIGHT FRONT 2
LEFT REAR 2
RIGHT REAR 2
SUB 1
CENTER 1
LEFT REAR 3
RIGHT REAR 3
1
LEFT FRONT OUT 1LEFT FRONT OUT 1
RIGHT FRONT OUT 2RIGHT FRONT OUT 2
LEFT SPARE OUT 3LEFT SPARE OUT 3
RIGHT SPARE OUT 4RIGHT SPARE OUT 4
LEFT REAR OUT 5LEFT REAR OUT 5
RIGHT REAR OUT 6RIGHT REAR OUT 6
LEFT SUB OUT 7LEFT SUB OUT 7
RIGHT SUB OUT 8RIGHT SUB OUT 8
CONNECTIONS NOT REQUIRED
WIRING DIAGRAM
STEP 1
STEP 2STEP 3
aCH3 T-HARNESS
FACTORY AMPLIFIERHARNESSES
AMPLIFIER
WIRES FROMVEHICLE
WHITEWHITE
GREENGREEN
GRAYGRAY
BLUE
PURPLEPURPLE
REDN.C.
N.C.
STEP 4DSR1 MODULE
RCA CABLES
WHITEWHITE/BLACK
GRAYGRAY/BLACK
GREENGREEN/BLACK
PURPLE/BLACK
GRAY/RED
WHITE/REDGRAY
GREENGREEN/RED
PURPLE
WHITE
PURPLE
PURPLE/REDBLACK
BLACK/WHITE
ORANGEORANGE/BLACK
GREEN/WHITEGREEN
PURPLEPURPLE/WHITE
ADS-DSR1-CHR03 maestro.idatalink.com
JEEP GRAND CHEROKEE WITH HARMAN KARDON 2014
Automotive Data Solutions Inc. © 2017 5
1
2
3
4
5
6
7
8
910
11
12
13
14
15
16
17
18
1
2
5
6
7
8
910
11
12
15
VEHICLE WIRE REFERENCE CHART
T-Harness Wires Vehicle Wires
WireTag
WireColor Speaker Wire Description Component
Position
LEFT FRONT 1 White Left Front Door Speaker (+)
1White/Black Left Front Door Speaker (-)
LEFT FRONT 2White Left Front Tweeter on Dash (+)
5White/Red Left Front Tweeter on Dash (-)
RIGHT FRONT 1 Gray Right Front Door Speaker (+)
2Gray/Black Right Front Door Speaker (-)
RIGHT FRONT 2Gray/Red Right Front Tweeter on Dash (+)
6Gray Right Front Tweeter on Dash (-)
LEFT REAR 1 Green/Black Left Rear Door Speaker (+)
8Green Left Rear Door Speaker (-)
LEFT REAR 2Green/Red Subwoofer 1 (+)
12Green Subwoofer 1 (-)
LEFT REAR 3Green/White Left Rear Shelf Speaker (+)
11Green Left Rear Shelf Speaker (-)
RIGHT REAR 1Purple Right Rear Door Speaker (+)
9Purple/Black Right Rear Door Speaker (-)
RIGHT REAR 2Purple Right Rear Shelf Speaker (+)
10Purple/Red Right Rear Shelf Speaker (-)
RIGHT REAR 3Purple n/a
Purple/White n/a
CENTER 1Orange Center (+)
7Orange/Black Center (-)
SUB 1Black/White Subwoofer 2 (+)
15Black Subwoofer 2 (-)
Amplifi er location: Rear cargo area fl oor
Note: The amplifi er output colors and labels on the AR-CH3 T-harness do not correspond to the vehicle. For vehicle specifi c wiring designation, follow this wiring chart.
OPTIONAL ACCESSORIES
PROGRAMMED FIRMWAREADS-DSR1-CHR03
PRODUCTS REQUIREDRockford Fosgate DSR1iDatalink Maestro aCH3 Installation Harness
INSTALL GUIDEJEEP RENEGADE
2015-2017ENABLE A SEAMLESS AFTERMARKET AMPLIFIER INSTALLATION,
WITHOUT CHANGING YOUR RADIO.
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-DSR1-CHR03 maestro.idatalink.com
JEEP RENEGADE 2015-2017
Automotive Data Solutions Inc. © 2017 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro / Rockford Fosgate DSR1 Amplifi er replacement solution. You are now a few simple steps away from enjoying your new car amplifi er. Before starting your installation, please ensure that your module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Vehicle Wire Reference Chart 5
ADS-DSR1-CHR03 maestro.idatalink.com
JEEP RENEGADE 2015-2017
Automotive Data Solutions Inc. © 2017 3
INSTALLATION INSTRUCTIONS STEP 1
• Remove the factory amplifi er (refer to wire chart for amplifi er location).
• Confi gure the 2 pin connectors on the aCH3 T-harness as shown on the wiring diagram.
STEP 2• Connect the factory amplifi er harnesses to the aCH3
T-harness.
STEP 3• Connect the wires from the aCH3 T-harness to the
aftermarket amplifi er.
Note 1:
If you are running your own speaker wires from the amplifi er to the speakers, this step is not necessary.
Note 2:
The amplifi er output colors and labels on the aCH3 T-harness do not correspond to the vehicle. For vehicle specifi c wiring designation, see the wiring chart.
• Plug the RCA cables in the aftermarket amplifi er.
STEP 4• Connect all the harnesses to the DSR1 module.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
1
ADS-DSR1-CHR03 maestro.idatalink.com
JEEP RENEGADE 2015-2017
Automotive Data Solutions Inc. © 2017 4
LEFT FRONT 1
RIGHT FRONT 1
LEFT REAR 1
RIGHT REAR 1
LEFT FRONT 2
RIGHT FRONT 2
LEFT REAR 2
RIGHT REAR 2
SUB 1
CENTER 1
LEFT REAR 3
RIGHT REAR 3
1
LEFT FRONT OUT 1LEFT FRONT OUT 1
RIGHT FRONT OUT 2RIGHT FRONT OUT 2
LEFT SPARE OUT 3LEFT SPARE OUT 3
RIGHT SPARE OUT 4RIGHT SPARE OUT 4
LEFT REAR OUT 5LEFT REAR OUT 5
RIGHT REAR OUT 6RIGHT REAR OUT 6
LEFT SUB OUT 7LEFT SUB OUT 7
RIGHT SUB OUT 8RIGHT SUB OUT 8
CONNECTIONS NOT REQUIRED
WIRING DIAGRAM
STEP 1
STEP 2STEP 3
aCH3 T-HARNESS
FACTORY AMPLIFIERHARNESSES
AMPLIFIER
WIRES FROMVEHICLE
WHITEWHITE
GREENGREEN
GRAYGRAY
BLUE
PURPLEPURPLE
REDN.C.
N.C.
STEP 4DSR1 MODULE
RCA CABLES
WHITEWHITE/BLACK
GRAYGRAY/BLACK
GREENGREEN/BLACK
PURPLE/BLACK
GRAY/RED
WHITE/REDGRAY
GREENGREEN/RED
PURPLE
WHITE
PURPLE
PURPLE/REDBLACK
BLACK/WHITE
ORANGEORANGE/BLACK
GREEN/WHITEGREEN
PURPLEPURPLE/WHITE
ADS-DSR1-CHR03 maestro.idatalink.com
JEEP RENEGADE 2015-2017
Automotive Data Solutions Inc. © 2017 5
1
2
3
4
5
6
7
8
910
11
12
13
14
15
16
17
18
13
6
7
9
12
15
VEHICLE WIRE REFERENCE CHART
T-Harness Wires Vehicle Wires
WireTag
WireColor Speaker Wire Description Component
Position
LEFT FRONT 1 White Right Front Door Speaker (+)
6White/Black Right Front Door Speaker (-)
LEFT FRONT 2White Left Front Tweeter (+)
3White/Red Left Front Tweeter (-)
RIGHT FRONT 1 Gray Left Front Door Speaker (+)
1Gray/Black Left Front Door Speaker (-)
RIGHT FRONT 2Gray/Red Right Front Tweeter (+)
6Gray Right Front Tweeter (-)
LEFT REAR 1 Green/Black n/a
Green n/a
LEFT REAR 2Green/Red Left Rear Door Speaker (+)
12Green Left Rear Door Speaker (-)
LEFT REAR 3Green/White n/a
Green n/a
RIGHT REAR 1Purple Subwoofer 2 (+)
9Purple/Black Subwoofer 2 (-)
RIGHT REAR 2Purple n/a
Purple/Red n/a
RIGHT REAR 3Purple n/a
Purple/White n/a
CENTER 1Orange Right Rear Door Speaker (+)
7Orange/Black Right Rear Door Speaker (-)
SUB 1Black/White Subwoofer 1 (+)
15Black Subwoofer 1 (-)
Amplifi er location: Rear left quarter panel
Note: The amplifi er output colors and labels on the AR-CH3 T-harness do not correspond to the vehicle. For vehicle specifi c wiring designation, follow this wiring chart.