how to use this install guide -...
TRANSCRIPT
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certifi ed technician. Logos and trademarks used here in are the properties of their respective owners.
WARNINGPressing the printer icon or “quick printing” this document will print
all of the guides in this compilation.
Open the Bookmarks menu and find your vehicle OR scroll down until you find the install guide for your vehicle.
Print only the pages for your vehicle using the advanced options in the Print menu.
Install your Maestro RR according to the guide for your vehicle.
HOW TO USE THIS INSTALL GUIDE1
2
3
SELECT VEHICLE PRINT PAGES NEEDED
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SI)-TOY01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Compatible Radio
INSTALL GUIDESCION FR-S 2013-2015
retains steering wheel controls and adds gauges
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
scion Fr-s 2013-2015
Automotive Data Solutions Inc. © 2014 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Wiring Diagram 3
Vehicle Wire Reference Chart 4
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
scion Fr-s 2013-2015
Automotive Data Solutions Inc. © 2014 3
A
HG
A
G
H
4
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
NOT CONNECTED
NOT CONNECTED
OBDII CONNECTORLOCATED UNDER DRIVER SIDE DASH
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
MAESTRO RR MODULE
CONNECT TOAFTERMARKET RADIO
BROWN/RED - CANH
BROWN/YELLOW - CANL
WIRES FROMVEHICLE
WIRING DIAGRAMSTEP 1
STEP 2
STEP 3
YELLOW - 12V (+) INPUT
BLACK - GROUND
GRAY/RED - ACCESSORY (+) INPUT
BLACKBLACK
REDRED
YELLOWYELLOW
CANHCANH
CANLCANL
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
scion Fr-s 2013-2015
Automotive Data Solutions Inc. © 2014 4
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CanH A ~ 16 pin 06 Black/Yellow (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 LtGreen (DATA) OBDII connector, under driver side dash
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SI)-TOY01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Compatible Radio
INSTALL GUIDESCION IQ
2012-2015retains steering wheel controls and adds gauges
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
scion iQ 2012-2015
Automotive Data Solutions Inc. © 2014 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Wiring Diagram 3
Vehicle Wire Reference Chart 4
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
scion iQ 2012-2015
Automotive Data Solutions Inc. © 2014 3
3 4 5 62 9 10
11
7
13 14 15 16
1 8
12 17 19 2018
A
HG
A
G
H
1
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
NOT CONNECTED
NOT CONNECTED
OBDII CONNECTORLOCATED UNDER DRIVER SIDE DASH
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
MAESTRO RR MODULE
CONNECT TOAFTERMARKET RADIO
BROWN/RED - CANH
B- LOCATED BEHIND RADIO
SWI 1SWI 1
SWI 2SWI 2
SWI FEEDSWI FEED
PURPLE/RED - PURPLE/RED - SWI CIRCUIT 1 INPUT
BLACK/WHITE - BLACK/WHITE - SWI GROUND FEED (-) OUTPUT
BROWN/YELLOW - CANL
WIRES FROMVEHICLE
PINK/RED - PINK/RED - SWI CIRCUIT 2 INPUT
WIRING DIAGRAMSTEP 1
STEP 2
STEP 3
STEP 4
YELLOW - 12V (+) INPUT
BLACK - GROUND
GRAY/RED - ACCESSORY (+) INPUT
BLACKBLACK
REDRED
YELLOWYELLOW
CANHCANH
CANLCANL
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
scion iQ 2012-2015
Automotive Data Solutions Inc. © 2014 4
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CanH A ~ 16 pin 06 Violet (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 White (DATA) OBDII connector, under driver side dash
SWI 1 B ~ 20 pin 07 Brown (DATA) Behind radio
SWI 2 B ~ 20 pin 08 LtGreen (DATA) Behind radio
SWI Feed B ~ 20 pin 06 LtBlue (-) Behind radio
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SI)-TOY01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Compatible Radio
INSTALL GUIDESCION TC
2007-2010retains steering wheel controls and adds gauges
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
scion tc 2007-2010
Automotive Data Solutions Inc. © 2014 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Wiring Diagram 3
Vehicle Wire Reference Chart 4
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
scion tc 2007-2010
Automotive Data Solutions Inc. © 2014 3
3 4 5 62 9 10
11
7
13 14 15 16
1 8
12 17 19 2018
A
HG
A
G
H
1
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
NOT CONNECTED
NOT CONNECTED
OBDII CONNECTORLOCATED UNDER DRIVER SIDE DASH
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
MAESTRO RR MODULE
CONNECT TOAFTERMARKET RADIO
BROWN/RED - CANH
B- LOCATED BEHIND RADIO
SWI 1SWI 1
SWI 2SWI 2
SWI FEEDSWI FEED
PURPLE/RED - PURPLE/RED - SWI CIRCUIT 1 INPUT
BLACK/WHITE - BLACK/WHITE - SWI GROUND FEED (-) OUTPUT
BROWN/YELLOW - CANL
WIRES FROMVEHICLE
PINK/RED - PINK/RED - SWI CIRCUIT 2 INPUT
WIRING DIAGRAMSTEP 1
STEP 2
STEP 3
STEP 4
YELLOW - 12V (+) INPUT
BLACK - GROUND
GRAY/RED - ACCESSORY (+) INPUT
BLACKBLACK
REDRED
YELLOWYELLOW
CANHCANH
CANLCANL
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
scion tc 2007-2010
Automotive Data Solutions Inc. © 2014 4
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CanH A ~ 16 pin 06 Black (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 White (DATA) OBDII connector, under driver side dash
SWI 1 B ~ 20 pin 07 Pink (DATA) Behind radio
SWI 2 B ~ 20 pin 08 Green (DATA) Behind radio
SWI Feed B ~ 20 pin 06 Orange (-) Behind radio
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SI)-TOY01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Compatible Radio
INSTALL GUIDESCION TC
2011-2015retains steering wheel controls and adds gauges
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
scion tc 2011-2015
Automotive Data Solutions Inc. © 2014 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Wiring Diagram 3
Vehicle Wire Reference Chart 4
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
scion tc 2011-2015
Automotive Data Solutions Inc. © 2014 3
3 4 5 62 9 10
11
7
13 14 15 16
1 8
12 17 19 2018
A
HG
A
G
H
1
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
NOT CONNECTED
NOT CONNECTED
OBDII CONNECTORLOCATED UNDER DRIVER SIDE DASH
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
MAESTRO RR MODULE
CONNECT TOAFTERMARKET RADIO
BROWN/RED - CANH
B- LOCATED BEHIND RADIO
SWI 1SWI 1
SWI 2SWI 2
SWI FEEDSWI FEED
PURPLE/RED - PURPLE/RED - SWI CIRCUIT 1 INPUT
BLACK/WHITE - BLACK/WHITE - SWI GROUND FEED (-) OUTPUT
BROWN/YELLOW - CANL
WIRES FROMVEHICLE
PINK/RED - PINK/RED - SWI CIRCUIT 2 INPUT
WIRING DIAGRAMSTEP 1
STEP 2
STEP 3
STEP 4
YELLOW - 12V (+) INPUT
BLACK - GROUND
GRAY/RED - ACCESSORY (+) INPUT
BLACKBLACK
REDRED
YELLOWYELLOW
CANHCANH
CANLCANL
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
scion tc 2011-2015
Automotive Data Solutions Inc. © 2014 4
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CanH A ~ 16 pin 06 LtGreen (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 White (DATA) OBDII connector, under driver side dash
SWI 1 B ~ 20 pin 07 Yellow (DATA) Behind radio
SWI 2 B ~ 20 pin 08 Green (DATA) Behind radio
SWI Feed B ~ 20 pin 06 Gray (-) Behind radio
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SI)-TOY01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Compatible Radio
INSTALL GUIDESCION xB
2008-2012retains steering wheel controls and adds gauges
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
scion xB 2008-2012
Automotive Data Solutions Inc. © 2014 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Wiring Diagram 3
Vehicle Wire Reference Chart 4
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
scion xB 2008-2012
Automotive Data Solutions Inc. © 2014 3
3 4 5 62 9 10
11
7
13 14 15 16
1 8
12 17 19 2018
A
HG
A
G
H
1
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
NOT CONNECTED
NOT CONNECTED
OBDII CONNECTORLOCATED UNDER DRIVER SIDE DASH
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
MAESTRO RR MODULE
CONNECT TOAFTERMARKET RADIO
BROWN/RED - CANH
B- LOCATED BEHIND RADIO
SWI 1SWI 1
SWI 2SWI 2
SWI FEEDSWI FEED
PURPLE/RED - PURPLE/RED - SWI CIRCUIT 1 INPUT
BLACK/WHITE - BLACK/WHITE - SWI GROUND FEED (-) OUTPUT
BROWN/YELLOW - CANL
WIRES FROMVEHICLE
PINK/RED - PINK/RED - SWI CIRCUIT 2 INPUT
WIRING DIAGRAMSTEP 1
STEP 2
STEP 3
STEP 4
YELLOW - 12V (+) INPUT
BLACK - GROUND
GRAY/RED - ACCESSORY (+) INPUT
BLACKBLACK
REDRED
YELLOWYELLOW
CANHCANH
CANLCANL
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
scion xB 2008-2012
Automotive Data Solutions Inc. © 2014 4
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CanH A ~ 16 pin 06 LtGreen (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 White (DATA) OBDII connector, under driver side dash
SWI 1 B ~ 20 pin 07 White (DATA) Behind radio
SWI 2 B ~ 20 pin 08 Red (DATA) Behind radio
SWI Feed B ~ 20 pin 06 Black (-) Behind radio
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SI)-TOY01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Compatible Radio
INSTALL GUIDESCION xD
2008-2014retains steering wheel controls and adds gauges
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
scion xd 2008-2014
Automotive Data Solutions Inc. © 2014 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Wiring Diagram 3
Vehicle Wire Reference Chart 4
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
scion xd 2008-2014
Automotive Data Solutions Inc. © 2014 3
3 4 5 62 9 10
11
7
13 14 15 16
1 8
12 17 19 2018
A
HG
A
G
H
1
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
NOT CONNECTED
NOT CONNECTED
OBDII CONNECTORLOCATED UNDER DRIVER SIDE DASH
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
MAESTRO RR MODULE
CONNECT TOAFTERMARKET RADIO
BROWN/RED - CANH
B- LOCATED BEHIND RADIO
SWI 1SWI 1
SWI 2SWI 2
SWI FEEDSWI FEED
PURPLE/RED - PURPLE/RED - SWI CIRCUIT 1 INPUT
BLACK/WHITE - BLACK/WHITE - SWI GROUND FEED (-) OUTPUT
BROWN/YELLOW - CANL
WIRES FROMVEHICLE
PINK/RED - PINK/RED - SWI CIRCUIT 2 INPUT
WIRING DIAGRAMSTEP 1
STEP 2
STEP 3
STEP 4
YELLOW - 12V (+) INPUT
BLACK - GROUND
GRAY/RED - ACCESSORY (+) INPUT
BLACKBLACK
REDRED
YELLOWYELLOW
CANHCANH
CANLCANL
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
scion xd 2008-2014
Automotive Data Solutions Inc. © 2014 4
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CanH A ~ 16 pin 06 Violet (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 White (DATA) OBDII connector, under driver side dash
SWI 1 B ~ 20 pin 07 Pink (DATA) Behind radio
SWI 2 B ~ 20 pin 08 Orange or Tan (DATA) Behind radio
SWI Feed B ~ 20 pin 06 Green (-) Behind radio
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SI)-TOY01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Compatible Radio
INSTALL GUIDETOyOTA 4 RUNNER
2005-2009retains steering wheel controls and adds gauges
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota 4 runner 2005-2009
Automotive Data Solutions Inc. © 2014 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Wiring Diagram 3
Vehicle Wire Reference Chart 4
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota 4 runner 2005-2009
Automotive Data Solutions Inc. © 2014 3
3 4 5 62 9 10
11
7
13 14 15 16
1 8
12 17 19 2018
A
HG
A
G
H
1
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
NOT CONNECTED
NOT CONNECTED
OBDII CONNECTORLOCATED UNDER DRIVER SIDE DASH
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
MAESTRO RR MODULE
CONNECT TOAFTERMARKET RADIO
BROWN/RED - CANH
B- LOCATED BEHIND RADIO
SWI 1SWI 1
SWI 2SWI 2
SWI FEEDSWI FEED
PURPLE/RED - PURPLE/RED - SWI CIRCUIT 1 INPUT
BLACK/WHITE - BLACK/WHITE - SWI GROUND FEED (-) OUTPUT
BROWN/YELLOW - CANL
WIRES FROMVEHICLE
PINK/RED - PINK/RED - SWI CIRCUIT 2 INPUT
WIRING DIAGRAMSTEP 1
STEP 2
STEP 3
STEP 4
YELLOW - 12V (+) INPUT
BLACK - GROUND
GRAY/RED - ACCESSORY (+) INPUT
BLACKBLACK
REDRED
YELLOWYELLOW
CANHCANH
CANLCANL
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota 4 runner 2005-2009
Automotive Data Solutions Inc. © 2014 4
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CanH A ~ 16 pin 06 Pink (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 Violet (DATA) OBDII connector, under driver side dash
SWI 1 B ~ 20 pin 07 Violet/White (DATA) Behind radio
SWI 2 B ~ 20 pin 08 Yellow/Black (DATA) Behind radio
SWI Feed B ~ 20 pin 06 White/Red (-) Behind radio
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SI)-TOY01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Compatible Radio
INSTALL GUIDETOyOTA 4 RUNNER
2010-2011retains steering wheel controls and adds gauges
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota 4 runner 2010-2011
Automotive Data Solutions Inc. © 2014 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Wiring Diagram 3
Vehicle Wire Reference Chart 4
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota 4 runner 2010-2011
Automotive Data Solutions Inc. © 2014 3
3 4 5 62 9 10
11
7
13 14 15 16
1 8
12 17 19 2018
A
HG
A
G
H
1
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
NOT CONNECTED
NOT CONNECTED
OBDII CONNECTORLOCATED UNDER DRIVER SIDE DASH
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
MAESTRO RR MODULE
CONNECT TOAFTERMARKET RADIO
BROWN/RED - CANH
B- LOCATED BEHIND RADIO
SWI 1SWI 1
SWI 2SWI 2
SWI FEEDSWI FEED
PURPLE/RED - PURPLE/RED - SWI CIRCUIT 1 INPUT
BLACK/WHITE - BLACK/WHITE - SWI GROUND FEED (-) OUTPUT
BROWN/YELLOW - CANL
WIRES FROMVEHICLE
PINK/RED - PINK/RED - SWI CIRCUIT 2 INPUT
WIRING DIAGRAMSTEP 1
STEP 2
STEP 3
STEP 4
YELLOW - 12V (+) INPUT
BLACK - GROUND
GRAY/RED - ACCESSORY (+) INPUT
BLACKBLACK
REDRED
YELLOWYELLOW
CANHCANH
CANLCANL
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota 4 runner 2010-2011
Automotive Data Solutions Inc. © 2014 4
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CanH A ~ 16 pin 06 Violet (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 White (DATA) OBDII connector, under driver side dash
SWI 1 B ~ 20 pin 07 White (DATA) Behind radio
SWI 2 B ~ 20 pin 08 Red (DATA) Behind radio
SWI Feed B ~ 20 pin 06 Blue (-) Behind radio
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SI)-TOY01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Compatible Radio
INSTALL GUIDETOyOTA 4 RUNNER
2012-2013retains steering wheel controls and adds gauges
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota 4 runner 2012-2013
Automotive Data Solutions Inc. © 2014 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Wiring Diagram 3
Vehicle Wire Reference Chart 4
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota 4 runner 2012-2013
Automotive Data Solutions Inc. © 2014 3
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
3 4 5 62 9 10
11
7
13 14 15 16
1 8
12 17 19 2018
A
HG
A
G
H
3
87654321 109
282221 26 27
1211
25242320
1413
18 19171615
NOT CONNECTED
NOT CONNECTED
OR
MAESTRO RR MODULE
B- LOCATED BEHIND RADIO
SWI 1SWI 1SWI 2SWI 2SWI FEEDSWI FEED
SWI 1SWI 1
SWI 2SWI 2
SWI FEEDSWI FEED
PURPLE/RED - PURPLE/RED - SWI CIRCUIT 1 INPUT
BLACK/WHITE - BLACK/WHITE - SWI GROUND FEED (-) OUTPUT
WIRES FROMVEHICLE
PINK/RED - PINK/RED - SWI CIRCUIT 2 INPUT
WIRING DIAGRAM
STEP 2
STEP 4
SWI 1SWI 1SWI 2SWI 2SWI FEEDSWI FEED
OBDII CONNECTORLOCATED UNDER DRIVER SIDE DASH
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
BROWN/RED - CANH
BROWN/YELLOW - CANL
STEP 1
CANHCANH
CANLCANL
CONNECT TOAFTERMARKET RADIO
STEP 3
YELLOW - 12V (+) INPUT
BLACK - GROUND
GRAY/RED - ACCESSORY (+) INPUT
BLACKBLACK
REDRED
YELLOWYELLOW
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota 4 runner 2012-2013
Automotive Data Solutions Inc. © 2014 4
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CanH A ~ 16 pin 06 Violet (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 White (DATA) OBDII connector, under driver side dash
SWI 1 B ~ 20 or 28 pin 07 or 21 White (DATA) Behind radio
SWI 2 B ~ 20 or 28 pin 08 or 22 Red (DATA) Behind radio
SWI Feed B ~ 20 or 28 pin 06 or 23 Blue (-) Behind radio
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SI)-TOY01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Compatible Radio
INSTALL GUIDETOyOTA 4 RUNNER
2014-2015retains steering wheel controls and adds gauges
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota 4 runner 2014-2015
Automotive Data Solutions Inc. © 2014 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Wiring Diagram 3
Vehicle Wire Reference Chart 4
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota 4 runner 2014-2015
Automotive Data Solutions Inc. © 2014 3
87654321 109
282221 26 27
1211
25242320
1413
18 19171615
A
HG
A
G
H
2
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
NOT CONNECTED
MAESTRO RR MODULE
CONNECT TOAFTERMARKET RADIO
C- LOCATED BEHIND RADIO
SWI 1SWI 1
SWI 3SWI 3
SWI 2SWI 2SWI FEEDSWI FEED
PURPLE/RED - PURPLE/RED - SWI CIRCUIT 1 INPUT
ORANGE/RED - ORANGE/RED - SWI CIRCUIT 3 INPUTBLACK/WHITE - BLACK/WHITE - SWI GROUND FEED (-) OUTPUT
WIRES FROMVEHICLE
PINK/RED - PINK/RED - SWI CIRCUIT 2 INPUT
WIRING DIAGRAM
STEP 2
STEP 3
STEP 4NOT CONNECTED
YELLOW - 12V (+) INPUT
BLACK - GROUND
GRAY/RED - ACCESSORY (+) INPUT
BLACKBLACK
REDRED
YELLOWYELLOW
OBDII CONNECTORLOCATED UNDER DRIVER SIDE DASH
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
BROWN/RED - CANH
BROWN/YELLOW - CANL
STEP 1
CANHCANH
CANLCANL
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota 4 runner 2014-2015
Automotive Data Solutions Inc. © 2014 4
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CanH A ~ 16 pin 06 Violet (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 White (DATA) OBDII connector, under driver side dash
SWI 1 B ~ 28 pin 21 White (DATA) Behind radio
SWI 2 B ~ 28 pin 22 Red (DATA) Behind radio
SWI 3 B ~ 28 pin 24 Pink (DATA) Behind radio
SWI Feed B ~ 28 pin 23 Blue (-) Behind radio
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SI)-TOY01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Compatible Radio
INSTALL GUIDETOyOTA AvALON
2006-2012retains steering wheel controls and adds gauges
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota avalon 2006-2012
Automotive Data Solutions Inc. © 2014 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Wiring Diagram 3
Vehicle Wire Reference Chart 4
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota avalon 2006-2012
Automotive Data Solutions Inc. © 2014 3
3 4 5 62 9 10
11
7
13 14 15 16
1 8
12 17 19 2018
A
HG
A
G
H
1
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
NOT CONNECTED
NOT CONNECTED
OBDII CONNECTORLOCATED UNDER DRIVER SIDE DASH
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
MAESTRO RR MODULE
CONNECT TOAFTERMARKET RADIO
BROWN/RED - CANH
B- LOCATED BEHIND RADIO
SWI 1SWI 1
SWI 2SWI 2
SWI FEEDSWI FEED
PURPLE/RED - PURPLE/RED - SWI CIRCUIT 1 INPUT
BLACK/WHITE - BLACK/WHITE - SWI GROUND FEED (-) OUTPUT
BROWN/YELLOW - CANL
WIRES FROMVEHICLE
PINK/RED - PINK/RED - SWI CIRCUIT 2 INPUT
WIRING DIAGRAMSTEP 1
STEP 2
STEP 3
STEP 4
YELLOW - 12V (+) INPUT
BLACK - GROUND
GRAY/RED - ACCESSORY (+) INPUT
BLACKBLACK
REDRED
YELLOWYELLOW
CANHCANH
CANLCANL
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota avalon 2006-2012
Automotive Data Solutions Inc. © 2014 4
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CanH A ~ 16 pin 06 Pink (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 White or Orange (DATA) OBDII connector, under driver side dash
SWI 1 B ~ 20 pin 07 Orange (DATA) Behind radio
SWI 2 B ~ 20 pin 08 Violet (DATA) Behind radio
SWI Feed B ~ 20 pin 06 Black (-) Behind radio
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SI)-TOY01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Compatible Radio
INSTALL GUIDETOyOTA AvALON
2013-2014retains steering wheel controls and adds gauges
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota avalon 2013-2014
Automotive Data Solutions Inc. © 2014 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Wiring Diagram 3
Vehicle Wire Reference Chart 4
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota avalon 2013-2014
Automotive Data Solutions Inc. © 2014 3
87654321 109
282221 26 27
1211
25242320
1413
18 19171615
A
HG
A
G
H
2
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
NOT CONNECTED
MAESTRO RR MODULE
CONNECT TOAFTERMARKET RADIO
C- LOCATED BEHIND RADIO
SWI 1SWI 1
SWI 3SWI 3
SWI 2SWI 2SWI FEEDSWI FEED
PURPLE/RED - PURPLE/RED - SWI CIRCUIT 1 INPUT
ORANGE/RED - ORANGE/RED - SWI CIRCUIT 3 INPUTBLACK/WHITE - BLACK/WHITE - SWI GROUND FEED (-) OUTPUT
WIRES FROMVEHICLE
PINK/RED - PINK/RED - SWI CIRCUIT 2 INPUT
WIRING DIAGRAM
STEP 2
STEP 3
STEP 4NOT CONNECTED
YELLOW - 12V (+) INPUT
BLACK - GROUND
GRAY/RED - ACCESSORY (+) INPUT
BLACKBLACK
REDRED
YELLOWYELLOW
OBDII CONNECTORLOCATED UNDER DRIVER SIDE DASH
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
BROWN/RED - CANH
BROWN/YELLOW - CANL
STEP 1
CANHCANH
CANLCANL
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota avalon 2013-2014
Automotive Data Solutions Inc. © 2014 4
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CanH A ~ 16 pin 06 Blue (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 White (DATA) OBDII connector, under driver side dash
SWI 1 B ~ 28 pin 21 Black (DATA) Behind radio
SWI 2 B ~ 28 pin 22 Yellow (DATA) Behind radio
SWI 3 B ~ 28 pin 24 Blue (DATA) Behind radio
SWI Feed B ~ 28 pin 23 Pink (-) Behind radio
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SI)-TOY01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Compatible Radio
INSTALL GUIDETOyOTA CAMRy
2007-2011retains steering wheel controls and adds gauges
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota camry 2007-2011
Automotive Data Solutions Inc. © 2014 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Wiring Diagram 3
Vehicle Wire Reference Chart 4
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota camry 2007-2011
Automotive Data Solutions Inc. © 2014 3
3 4 5 62 9 10
11
7
13 14 15 16
1 8
12 17 19 2018
A
HG
A
G
H
1
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
NOT CONNECTED
NOT CONNECTED
OBDII CONNECTORLOCATED UNDER DRIVER SIDE DASH
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
MAESTRO RR MODULE
CONNECT TOAFTERMARKET RADIO
BROWN/RED - CANH
B- LOCATED BEHIND RADIO
SWI 1SWI 1
SWI 2SWI 2
SWI FEEDSWI FEED
PURPLE/RED - PURPLE/RED - SWI CIRCUIT 1 INPUT
BLACK/WHITE - BLACK/WHITE - SWI GROUND FEED (-) OUTPUT
BROWN/YELLOW - CANL
WIRES FROMVEHICLE
PINK/RED - PINK/RED - SWI CIRCUIT 2 INPUT
WIRING DIAGRAMSTEP 1
STEP 2
STEP 3
STEP 4
YELLOW - 12V (+) INPUT
BLACK - GROUND
GRAY/RED - ACCESSORY (+) INPUT
BLACKBLACK
REDRED
YELLOWYELLOW
CANHCANH
CANLCANL
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota camry 2007-2011
Automotive Data Solutions Inc. © 2014 4
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CanH A ~ 16 pin 06 Black (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 White (DATA) OBDII connector, under driver side dash
SWI 1 B ~ 20 pin 07 Orange (DATA) Behind radio
SWI 2 B ~ 20 pin 08 Yellow (DATA) Behind radio
SWI Feed B ~ 20 pin 06 Pink (-) Behind radio
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SI)-TOY01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Compatible Radio
INSTALL GUIDETOyOTA CAMRy
2012-2015retains steering wheel controls and adds gauges
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota camry 2012-2015
Automotive Data Solutions Inc. © 2014 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Wiring Diagram 3
Vehicle Wire Reference Chart 4
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota camry 2012-2015
Automotive Data Solutions Inc. © 2014 3
87654321 109
282221 26 27
1211
25242320
1413
18 19171615
A
HG
A
G
H
2
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
NOT CONNECTED
MAESTRO RR MODULE
CONNECT TOAFTERMARKET RADIO
C- LOCATED BEHIND RADIO
SWI 1SWI 1
SWI 3SWI 3
SWI 2SWI 2SWI FEEDSWI FEED
PURPLE/RED - PURPLE/RED - SWI CIRCUIT 1 INPUT
ORANGE/RED - ORANGE/RED - SWI CIRCUIT 3 INPUTBLACK/WHITE - BLACK/WHITE - SWI GROUND FEED (-) OUTPUT
WIRES FROMVEHICLE
PINK/RED - PINK/RED - SWI CIRCUIT 2 INPUT
WIRING DIAGRAM
STEP 2
STEP 3
STEP 4NOT CONNECTED
YELLOW - 12V (+) INPUT
BLACK - GROUND
GRAY/RED - ACCESSORY (+) INPUT
BLACKBLACK
REDRED
YELLOWYELLOW
OBDII CONNECTORLOCATED UNDER DRIVER SIDE DASH
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
BROWN/RED - CANH
BROWN/YELLOW - CANL
STEP 1
CANHCANH
CANLCANL
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota camry 2012-2015
Automotive Data Solutions Inc. © 2014 4
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CanH A ~ 16 pin 06 Blue (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 White (DATA) OBDII connector, under driver side dash
SWI 1 B ~ 28 pin 21 Black (DATA) Behind radio
SWI 2 B ~ 28 pin 22 Yellow (DATA) Behind radio
SWI 3 B ~ 28 pin 24 Blue (DATA) Behind radio
SWI Feed B ~ 28 pin 23 Pink (-) Behind radio
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SI)-TOY01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Compatible Radio
INSTALL GUIDETOyOTA COROLLA
2009-2011retains steering wheel controls and adds gauges
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota corolla 2009-2011
Automotive Data Solutions Inc. © 2014 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Wiring Diagram 3
Vehicle Wire Reference Chart 4
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota corolla 2009-2011
Automotive Data Solutions Inc. © 2014 3
3 4 5 62 9 10
11
7
13 14 15 16
1 8
12 17 19 2018
A
HG
A
G
H
1
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
NOT CONNECTED
NOT CONNECTED
OBDII CONNECTORLOCATED UNDER DRIVER SIDE DASH
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
MAESTRO RR MODULE
CONNECT TOAFTERMARKET RADIO
BROWN/RED - CANH
B- LOCATED BEHIND RADIO
SWI 1SWI 1
SWI 2SWI 2
SWI FEEDSWI FEED
PURPLE/RED - PURPLE/RED - SWI CIRCUIT 1 INPUT
BLACK/WHITE - BLACK/WHITE - SWI GROUND FEED (-) OUTPUT
BROWN/YELLOW - CANL
WIRES FROMVEHICLE
PINK/RED - PINK/RED - SWI CIRCUIT 2 INPUT
WIRING DIAGRAMSTEP 1
STEP 2
STEP 3
STEP 4
YELLOW - 12V (+) INPUT
BLACK - GROUND
GRAY/RED - ACCESSORY (+) INPUT
BLACKBLACK
REDRED
YELLOWYELLOW
CANHCANH
CANLCANL
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota corolla 2009-2011
Automotive Data Solutions Inc. © 2014 4
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CanH A ~ 16 pin 06 Green (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 White (DATA) OBDII connector, under driver side dash
SWI 1 B ~ 20 pin 07 Orange (DATA) Behind radio
SWI 2 B ~ 20 pin 08 Pink (DATA) Behind radio
SWI Feed B ~ 20 pin 06 Blue (-) Behind radio
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SI)-TOY01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Compatible Radio
INSTALL GUIDETOyOTA COROLLA
2012-2013retains steering wheel controls and adds gauges
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota corolla 2012-2013
Automotive Data Solutions Inc. © 2014 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Wiring Diagram 3
Vehicle Wire Reference Chart 4
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota corolla 2012-2013
Automotive Data Solutions Inc. © 2014 3
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
3 4 5 62 9 10
11
7
13 14 15 16
1 8
12 17 19 2018
A
HG
A
G
H
3
87654321 109
282221 26 27
1211
25242320
1413
18 19171615
NOT CONNECTED
NOT CONNECTED
OR
MAESTRO RR MODULE
B- LOCATED BEHIND RADIO
SWI 1SWI 1SWI 2SWI 2SWI FEEDSWI FEED
SWI 1SWI 1
SWI 2SWI 2
SWI FEEDSWI FEED
PURPLE/RED - PURPLE/RED - SWI CIRCUIT 1 INPUT
BLACK/WHITE - BLACK/WHITE - SWI GROUND FEED (-) OUTPUT
WIRES FROMVEHICLE
PINK/RED - PINK/RED - SWI CIRCUIT 2 INPUT
WIRING DIAGRAM
STEP 2
STEP 4
SWI 1SWI 1SWI 2SWI 2SWI FEEDSWI FEED
OBDII CONNECTORLOCATED UNDER DRIVER SIDE DASH
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
BROWN/RED - CANH
BROWN/YELLOW - CANL
STEP 1
CANHCANH
CANLCANL
CONNECT TOAFTERMARKET RADIO
STEP 3
YELLOW - 12V (+) INPUT
BLACK - GROUND
GRAY/RED - ACCESSORY (+) INPUT
BLACKBLACK
REDRED
YELLOWYELLOW
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota corolla 2012-2013
Automotive Data Solutions Inc. © 2014 4
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CanH A ~ 16 pin 06 Green (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 White (DATA) OBDII connector, under driver side dash
SWI 1 B ~ 20 or 28 pin 07 or 21 Orange (DATA) Behind radio
SWI 2 B ~ 20 or 28 pin 08 or 22 Pink (DATA) Behind radio
SWI Feed B ~ 20 or 28 pin 06 or 23 Blue (-) Behind radio
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SI)-TOY01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Compatible Radio
INSTALL GUIDETOyOTA COROLLA
2014-2015retains steering wheel controls and adds gauges
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota corolla 2014-2015
Automotive Data Solutions Inc. © 2014 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Wiring Diagram 3
Vehicle Wire Reference Chart 4
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota corolla 2014-2015
Automotive Data Solutions Inc. © 2014 3
87654321 109
282221 26 27
1211
25242320
1413
18 19171615
A
HG
A
G
H
2
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
NOT CONNECTED
MAESTRO RR MODULE
CONNECT TOAFTERMARKET RADIO
C- LOCATED BEHIND RADIO
SWI 1SWI 1
SWI 3SWI 3
SWI 2SWI 2SWI FEEDSWI FEED
PURPLE/RED - PURPLE/RED - SWI CIRCUIT 1 INPUT
ORANGE/RED - ORANGE/RED - SWI CIRCUIT 3 INPUTBLACK/WHITE - BLACK/WHITE - SWI GROUND FEED (-) OUTPUT
WIRES FROMVEHICLE
PINK/RED - PINK/RED - SWI CIRCUIT 2 INPUT
WIRING DIAGRAM
STEP 2
STEP 3
STEP 4NOT CONNECTED
YELLOW - 12V (+) INPUT
BLACK - GROUND
GRAY/RED - ACCESSORY (+) INPUT
BLACKBLACK
REDRED
YELLOWYELLOW
OBDII CONNECTORLOCATED UNDER DRIVER SIDE DASH
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
BROWN/RED - CANH
BROWN/YELLOW - CANL
STEP 1
CANHCANH
CANLCANL
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota corolla 2014-2015
Automotive Data Solutions Inc. © 2014 4
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CanH A ~ 16 pin 06 Red (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 White (DATA) OBDII connector, under driver side dash
SWI 1 B ~ 28 pin 21 LtBlue (DATA) Behind radio
SWI 2 B ~ 28 pin 22 Red (DATA) Behind radio
SWI 3 B ~ 28 pin 24 DkBlue (DATA) Behind radio
SWI Feed B ~ 28 pin 23 Black (-) Behind radio
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SI)-TOY01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Compatible Radio
INSTALL GUIDETOyOTA HIGHLANDER
2008-2012retains steering wheel controls and adds gauges
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota highlander 2008-2012
Automotive Data Solutions Inc. © 2014 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Wiring Diagram 3
Vehicle Wire Reference Chart 4
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota highlander 2008-2012
Automotive Data Solutions Inc. © 2014 3
3 4 5 62 9 10
11
7
13 14 15 16
1 8
12 17 19 2018
A
HG
A
G
H
1
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
NOT CONNECTED
NOT CONNECTED
OBDII CONNECTORLOCATED UNDER DRIVER SIDE DASH
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
MAESTRO RR MODULE
CONNECT TOAFTERMARKET RADIO
BROWN/RED - CANH
B- LOCATED BEHIND RADIO
SWI 1SWI 1
SWI 2SWI 2
SWI FEEDSWI FEED
PURPLE/RED - PURPLE/RED - SWI CIRCUIT 1 INPUT
BLACK/WHITE - BLACK/WHITE - SWI GROUND FEED (-) OUTPUT
BROWN/YELLOW - CANL
WIRES FROMVEHICLE
PINK/RED - PINK/RED - SWI CIRCUIT 2 INPUT
WIRING DIAGRAMSTEP 1
STEP 2
STEP 3
STEP 4
YELLOW - 12V (+) INPUT
BLACK - GROUND
GRAY/RED - ACCESSORY (+) INPUT
BLACKBLACK
REDRED
YELLOWYELLOW
CANHCANH
CANLCANL
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota highlander 2008-2012
Automotive Data Solutions Inc. © 2014 4
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CanH A ~ 16 pin 06 Blue (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 White (DATA) OBDII connector, under driver side dash
SWI 1 B ~ 20 pin 07 Orange (DATA) Behind radio
SWI 2 B ~ 20 pin 08 Violet (DATA) Behind radio
SWI Feed B ~ 20 pin 06 Black (-) Behind radio
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SI)-TOY01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Compatible Radio
INSTALL GUIDETOyOTA HIGHLANDER
2013retains steering wheel controls and adds gauges
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota highlander 2013
Automotive Data Solutions Inc. © 2014 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Wiring Diagram 3
Vehicle Wire Reference Chart 4
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota highlander 2013
Automotive Data Solutions Inc. © 2014 3
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
3 4 5 62 9 10
11
7
13 14 15 16
1 8
12 17 19 2018
A
HG
A
G
H
3
87654321 109
282221 26 27
1211
25242320
1413
18 19171615
NOT CONNECTED
NOT CONNECTED
OR
MAESTRO RR MODULE
B- LOCATED BEHIND RADIO
SWI 1SWI 1SWI 2SWI 2SWI FEEDSWI FEED
SWI 1SWI 1
SWI 2SWI 2
SWI FEEDSWI FEED
PURPLE/RED - PURPLE/RED - SWI CIRCUIT 1 INPUT
BLACK/WHITE - BLACK/WHITE - SWI GROUND FEED (-) OUTPUT
WIRES FROMVEHICLE
PINK/RED - PINK/RED - SWI CIRCUIT 2 INPUT
WIRING DIAGRAM
STEP 2
STEP 4
SWI 1SWI 1SWI 2SWI 2SWI FEEDSWI FEED
OBDII CONNECTORLOCATED UNDER DRIVER SIDE DASH
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
BROWN/RED - CANH
BROWN/YELLOW - CANL
STEP 1
CANHCANH
CANLCANL
CONNECT TOAFTERMARKET RADIO
STEP 3
YELLOW - 12V (+) INPUT
BLACK - GROUND
GRAY/RED - ACCESSORY (+) INPUT
BLACKBLACK
REDRED
YELLOWYELLOW
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota highlander 2013
Automotive Data Solutions Inc. © 2014 4
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CanH A ~ 16 pin 06 Blue (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 White (DATA) OBDII connector, under driver side dash
SWI 1 B ~ 20 or 28 pin 07 or 21 Orange (DATA) Behind radio
SWI 2 B ~ 20 or 28 pin 08 or 22 Violet (DATA) Behind radio
SWI Feed B ~ 20 or 28 pin 06 or 23 Black (-) Behind radio
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SI)-TOY01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Compatible Radio
INSTALL GUIDETOyOTA HIGHLANDER
2014-2015retains steering wheel controls and adds gauges
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota highlander 2014-2015
Automotive Data Solutions Inc. © 2014 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Wiring Diagram 3
Vehicle Wire Reference Chart 4
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota highlander 2014-2015
Automotive Data Solutions Inc. © 2014 3
87654321 109
282221 26 27
1211
25242320
1413
18 19171615
A
HG
A
G
H
2
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
NOT CONNECTED
MAESTRO RR MODULE
CONNECT TOAFTERMARKET RADIO
C- LOCATED BEHIND RADIO
SWI 1SWI 1
SWI 3SWI 3
SWI 2SWI 2SWI FEEDSWI FEED
PURPLE/RED - PURPLE/RED - SWI CIRCUIT 1 INPUT
ORANGE/RED - ORANGE/RED - SWI CIRCUIT 3 INPUTBLACK/WHITE - BLACK/WHITE - SWI GROUND FEED (-) OUTPUT
WIRES FROMVEHICLE
PINK/RED - PINK/RED - SWI CIRCUIT 2 INPUT
WIRING DIAGRAM
STEP 2
STEP 3
STEP 4NOT CONNECTED
YELLOW - 12V (+) INPUT
BLACK - GROUND
GRAY/RED - ACCESSORY (+) INPUT
BLACKBLACK
REDRED
YELLOWYELLOW
OBDII CONNECTORLOCATED UNDER DRIVER SIDE DASH
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
BROWN/RED - CANH
BROWN/YELLOW - CANL
STEP 1
CANHCANH
CANLCANL
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota highlander 2014-2015
Automotive Data Solutions Inc. © 2014 4
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CanH A ~ 16 pin 06 Violet (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 White (DATA) OBDII connector, under driver side dash
SWI 1 B ~ 28 pin 21 Pink (DATA) Behind radio
SWI 2 B ~ 28 pin 22 Blue (DATA) Behind radio
SWI 3 B ~ 28 pin 24 Green (DATA) Behind radio
SWI Feed B ~ 28 pin 23 Red (-) Behind radio
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SI)-TOY01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Compatible Radio
INSTALL GUIDETOyOTA LANDCRUISER
BASE 2008-2014retains steering wheel controls and adds gauges
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota landcruiser Base 2008-2014
Automotive Data Solutions Inc. © 2014 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Wiring Diagram 3
Vehicle Wire Reference Chart 4
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota landcruiser Base 2008-2014
Automotive Data Solutions Inc. © 2014 3
3 4 5 62 9 10
11
7
13 14 15 16
1 8
12 17 19 2018
A
HG
A
G
H
1
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
NOT CONNECTED
NOT CONNECTED
OBDII CONNECTORLOCATED UNDER DRIVER SIDE DASH
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
MAESTRO RR MODULE
CONNECT TOAFTERMARKET RADIO
BROWN/RED - CANH
B- LOCATED BEHIND RADIO
SWI 1SWI 1
SWI 2SWI 2
SWI FEEDSWI FEED
PURPLE/RED - PURPLE/RED - SWI CIRCUIT 1 INPUT
BLACK/WHITE - BLACK/WHITE - SWI GROUND FEED (-) OUTPUT
BROWN/YELLOW - CANL
WIRES FROMVEHICLE
PINK/RED - PINK/RED - SWI CIRCUIT 2 INPUT
WIRING DIAGRAMSTEP 1
STEP 2
STEP 3
STEP 4
YELLOW - 12V (+) INPUT
BLACK - GROUND
GRAY/RED - ACCESSORY (+) INPUT
BLACKBLACK
REDRED
YELLOWYELLOW
CANHCANH
CANLCANL
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota landcruiser Base 2008-2014
Automotive Data Solutions Inc. © 2014 4
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CanH A ~ 16 pin 06 Green (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 Black (DATA) OBDII connector, under driver side dash
SWI 1 B ~ 20 pin 07 Blue (DATA) Behind radio
SWI 2 B ~ 20 pin 08 Pink (DATA) Behind radio
SWI Feed B ~ 20 pin 06 White (-) Behind radio
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SI)-TOY01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Compatible Radio
INSTALL GUIDETOyOTA MATRIx
2009-2012retains steering wheel controls and adds gauges
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota matrix 2009-2012
Automotive Data Solutions Inc. © 2014 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Wiring Diagram 3
Vehicle Wire Reference Chart 4
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota matrix 2009-2012
Automotive Data Solutions Inc. © 2014 3
3 4 5 62 9 10
11
7
13 14 15 16
1 8
12 17 19 2018
A
HG
A
G
H
1
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
NOT CONNECTED
NOT CONNECTED
OBDII CONNECTORLOCATED UNDER DRIVER SIDE DASH
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
MAESTRO RR MODULE
CONNECT TOAFTERMARKET RADIO
BROWN/RED - CANH
B- LOCATED BEHIND RADIO
SWI 1SWI 1
SWI 2SWI 2
SWI FEEDSWI FEED
PURPLE/RED - PURPLE/RED - SWI CIRCUIT 1 INPUT
BLACK/WHITE - BLACK/WHITE - SWI GROUND FEED (-) OUTPUT
BROWN/YELLOW - CANL
WIRES FROMVEHICLE
PINK/RED - PINK/RED - SWI CIRCUIT 2 INPUT
WIRING DIAGRAMSTEP 1
STEP 2
STEP 3
STEP 4
YELLOW - 12V (+) INPUT
BLACK - GROUND
GRAY/RED - ACCESSORY (+) INPUT
BLACKBLACK
REDRED
YELLOWYELLOW
CANHCANH
CANLCANL
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota matrix 2009-2012
Automotive Data Solutions Inc. © 2014 4
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CanH A ~ 16 pin 06 Green (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 White (DATA) OBDII connector, under driver side dash
SWI 1 B ~ 20 pin 07 Orange (DATA) Behind radio
SWI 2 B ~ 20 pin 08 Pink (DATA) Behind radio
SWI Feed B ~ 20 pin 06 Blue (-) Behind radio
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SI)-TOY01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Compatible Radio
INSTALL GUIDETOyOTA MATRIx
2013retains steering wheel controls and adds gauges
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota matrix 2013
Automotive Data Solutions Inc. © 2014 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Wiring Diagram 3
Vehicle Wire Reference Chart 4
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota matrix 2013
Automotive Data Solutions Inc. © 2014 3
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
3 4 5 62 9 10
11
7
13 14 15 16
1 8
12 17 19 2018
A
HG
A
G
H
3
87654321 109
282221 26 27
1211
25242320
1413
18 19171615
NOT CONNECTED
NOT CONNECTED
OR
MAESTRO RR MODULE
B- LOCATED BEHIND RADIO
SWI 1SWI 1SWI 2SWI 2SWI FEEDSWI FEED
SWI 1SWI 1
SWI 2SWI 2
SWI FEEDSWI FEED
PURPLE/RED - PURPLE/RED - SWI CIRCUIT 1 INPUT
BLACK/WHITE - BLACK/WHITE - SWI GROUND FEED (-) OUTPUT
WIRES FROMVEHICLE
PINK/RED - PINK/RED - SWI CIRCUIT 2 INPUT
WIRING DIAGRAM
STEP 2
STEP 4
SWI 1SWI 1SWI 2SWI 2SWI FEEDSWI FEED
OBDII CONNECTORLOCATED UNDER DRIVER SIDE DASH
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
BROWN/RED - CANH
BROWN/YELLOW - CANL
STEP 1
CANHCANH
CANLCANL
CONNECT TOAFTERMARKET RADIO
STEP 3
YELLOW - 12V (+) INPUT
BLACK - GROUND
GRAY/RED - ACCESSORY (+) INPUT
BLACKBLACK
REDRED
YELLOWYELLOW
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota matrix 2013
Automotive Data Solutions Inc. © 2014 4
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CanH A ~ 16 pin 06 Green (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 White (DATA) OBDII connector, under driver side dash
SWI 1 B ~ 20 or 28 pin 07 or 21 Orange (DATA) Behind radio
SWI 2 B ~ 20 or 28 pin 08 or 22 Pink (DATA) Behind radio
SWI Feed B ~ 20 or 28 pin 06 or 23 Blue (-) Behind radio
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SI)-TOY01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Compatible Radio
INSTALL GUIDETOyOTA PRIUS
2010-2011retains steering wheel controls and adds gauges
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota Prius 2010-2011
Automotive Data Solutions Inc. © 2014 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Wiring Diagram 3
Vehicle Wire Reference Chart 4
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota Prius 2010-2011
Automotive Data Solutions Inc. © 2014 3
3 4 5 62 9 10
11
7
13 14 15 16
1 8
12 17 19 2018
A
HG
A
G
H
1
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
NOT CONNECTED
NOT CONNECTED
OBDII CONNECTORLOCATED UNDER DRIVER SIDE DASH
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
MAESTRO RR MODULE
CONNECT TOAFTERMARKET RADIO
BROWN/RED - CANH
B- LOCATED BEHIND RADIO
SWI 1SWI 1
SWI 2SWI 2
SWI FEEDSWI FEED
PURPLE/RED - PURPLE/RED - SWI CIRCUIT 1 INPUT
BLACK/WHITE - BLACK/WHITE - SWI GROUND FEED (-) OUTPUT
BROWN/YELLOW - CANL
WIRES FROMVEHICLE
PINK/RED - PINK/RED - SWI CIRCUIT 2 INPUT
WIRING DIAGRAMSTEP 1
STEP 2
STEP 3
STEP 4
YELLOW - 12V (+) INPUT
BLACK - GROUND
GRAY/RED - ACCESSORY (+) INPUT
BLACKBLACK
REDRED
YELLOWYELLOW
CANHCANH
CANLCANL
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota Prius 2010-2011
Automotive Data Solutions Inc. © 2014 4
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CanH A ~ 16 pin 06 White (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 Yellow (DATA) OBDII connector, under driver side dash
SWI 1 B ~ 20 pin 07 Red (DATA) Behind radio
SWI 2 B ~ 20 pin 08 Green (DATA) Behind radio
SWI Feed B ~ 20 pin 06 Pink (-) Behind radio
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SI)-TOY01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Compatible Radio
INSTALL GUIDETOyOTA PRIUS
2012-2015retains steering wheel controls and adds gauges
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota Prius 2012-2015
Automotive Data Solutions Inc. © 2014 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Wiring Diagram 3
Vehicle Wire Reference Chart 4
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota Prius 2012-2015
Automotive Data Solutions Inc. © 2014 3
87654321 109
282221 26 27
1211
25242320
1413
18 19171615
A
HG
A
G
H
6
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
NOT CONNECTED
MAESTRO RR MODULE
CONNECT TOAFTERMARKET RADIO
C- LOCATED BEHIND RADIO
SWI 1SWI 1SWI 2SWI 2SWI FEEDSWI FEED
PURPLE/RED - PURPLE/RED - SWI CIRCUIT 1 INPUT
BLACK/WHITE - BLACK/WHITE - SWI GROUND FEED (-) OUTPUT
WIRES FROMVEHICLE
PINK/RED - PINK/RED - SWI CIRCUIT 2 INPUT
WIRING DIAGRAM
STEP 2
STEP 3
STEP 4NOT CONNECTED
YELLOW - 12V (+) INPUT
BLACK - GROUND
GRAY/RED - ACCESSORY (+) INPUT
BLACKBLACK
REDRED
YELLOWYELLOW
OBDII CONNECTORLOCATED UNDER DRIVER SIDE DASH
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
BROWN/RED - CANH
BROWN/YELLOW - CANL
STEP 1
CANHCANH
CANLCANL
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota Prius 2012-2015
Automotive Data Solutions Inc. © 2014 4
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CanH A ~ 16 pin 06 White (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 Yellow (DATA) OBDII connector, under driver side dash
SWI 1 B ~ 28 pin 21 Red (DATA) Behind radio
SWI 2 B ~ 28 pin 22 Green (DATA) Behind radio
SWI Feed B ~ 28 pin 23 Pink (-) Behind radio
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SI)-TOY01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Compatible Radio
INSTALL GUIDETOyOTA PRIUS C
2012-2014retains steering wheel controls and adds gauges
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota Prius c 2012-2014
Automotive Data Solutions Inc. © 2014 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Wiring Diagram 3
Vehicle Wire Reference Chart 4
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota Prius c 2012-2014
Automotive Data Solutions Inc. © 2014 3
87654321 109
282221 26 27
1211
25242320
1413
18 19171615
A
HG
A
G
H
5
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
NOT CONNECTED
MAESTRO RR MODULE
CONNECT TOAFTERMARKET RADIO
C- LOCATED BEHIND RADIO
SWI 1SWI 1SWI 2SWI 2
PURPLE/RED - PURPLE/RED - SWI CIRCUIT 1 INPUT
WIRES FROMVEHICLE
PINK/RED - PINK/RED - SWI CIRCUIT 2 INPUT
WIRING DIAGRAM
STEP 2
STEP 3
STEP 4NOT CONNECTED
YELLOW - 12V (+) INPUT
BLACK - GROUND
GRAY/RED - ACCESSORY (+) INPUT
BLACKBLACK
REDRED
YELLOWYELLOW
OBDII CONNECTORLOCATED UNDER DRIVER SIDE DASH
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
BROWN/RED - CANH
BROWN/YELLOW - CANL
STEP 1
CANHCANH
CANLCANL
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota Prius c 2012-2014
Automotive Data Solutions Inc. © 2014 4
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CanH A ~ 16 pin 06 Gray (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 White (DATA) OBDII connector, under driver side dash
SWI 1 B ~ 28 pin 21 Blue (DATA) Behind radio
SWI 2 B ~ 28 pin 22 Pink (DATA) Behind radio
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SI)-TOY01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Compatible Radio
INSTALL GUIDETOyOTA PRIUS v
2012-2014retains steering wheel controls and adds gauges
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota Prius v 2012-2014
Automotive Data Solutions Inc. © 2014 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Wiring Diagram 3
Vehicle Wire Reference Chart 4
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota Prius v 2012-2014
Automotive Data Solutions Inc. © 2014 3
87654321 109
282221 26 27
1211
25242320
1413
18 19171615
A
HG
A
G
H
6
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
NOT CONNECTED
MAESTRO RR MODULE
CONNECT TOAFTERMARKET RADIO
C- LOCATED BEHIND RADIO
SWI 1SWI 1SWI 2SWI 2SWI FEEDSWI FEED
PURPLE/RED - PURPLE/RED - SWI CIRCUIT 1 INPUT
BLACK/WHITE - BLACK/WHITE - SWI GROUND FEED (-) OUTPUT
WIRES FROMVEHICLE
PINK/RED - PINK/RED - SWI CIRCUIT 2 INPUT
WIRING DIAGRAM
STEP 2
STEP 3
STEP 4NOT CONNECTED
YELLOW - 12V (+) INPUT
BLACK - GROUND
GRAY/RED - ACCESSORY (+) INPUT
BLACKBLACK
REDRED
YELLOWYELLOW
OBDII CONNECTORLOCATED UNDER DRIVER SIDE DASH
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
BROWN/RED - CANH
BROWN/YELLOW - CANL
STEP 1
CANHCANH
CANLCANL
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota Prius v 2012-2014
Automotive Data Solutions Inc. © 2014 4
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CanH A ~ 16 pin 06 Black (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 White (DATA) OBDII connector, under driver side dash
SWI 1 B ~ 28 pin 21 Violet (DATA) Behind radio
SWI 2 B ~ 28 pin 22 LtBlue (DATA) Behind radio
SWI Feed B ~ 28 pin 23 Pink (-) Behind radio
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SI)-TOY01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Compatible Radio
INSTALL GUIDETOyOTA RAv 4
2006-2011retains steering wheel controls and adds gauges
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota rav 4 2006-2011
Automotive Data Solutions Inc. © 2014 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Wiring Diagram 3
Vehicle Wire Reference Chart 4
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota rav 4 2006-2011
Automotive Data Solutions Inc. © 2014 3
3 4 5 62 9 10
11
7
13 14 15 16
1 8
12 17 19 2018
A
HG
A
G
H
1
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
NOT CONNECTED
NOT CONNECTED
OBDII CONNECTORLOCATED UNDER DRIVER SIDE DASH
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
MAESTRO RR MODULE
CONNECT TOAFTERMARKET RADIO
BROWN/RED - CANH
B- LOCATED BEHIND RADIO
SWI 1SWI 1
SWI 2SWI 2
SWI FEEDSWI FEED
PURPLE/RED - PURPLE/RED - SWI CIRCUIT 1 INPUT
BLACK/WHITE - BLACK/WHITE - SWI GROUND FEED (-) OUTPUT
BROWN/YELLOW - CANL
WIRES FROMVEHICLE
PINK/RED - PINK/RED - SWI CIRCUIT 2 INPUT
WIRING DIAGRAMSTEP 1
STEP 2
STEP 3
STEP 4
YELLOW - 12V (+) INPUT
BLACK - GROUND
GRAY/RED - ACCESSORY (+) INPUT
BLACKBLACK
REDRED
YELLOWYELLOW
CANHCANH
CANLCANL
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota rav 4 2006-2011
Automotive Data Solutions Inc. © 2014 4
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CanH A ~ 16 pin 06 Black (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 White (DATA) OBDII connector, under driver side dash
SWI 1 B ~ 20 pin 07 White (DATA) Behind radio
SWI 2 B ~ 20 pin 08 Red (DATA) Behind radio
SWI Feed B ~ 20 pin 06 Black (-) Behind radio
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SI)-TOY01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Compatible Radio
INSTALL GUIDETOyOTA RAv 4
2012-2013retains steering wheel controls and adds gauges
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota rav 4 2012-2013
Automotive Data Solutions Inc. © 2014 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Wiring Diagram 3
Vehicle Wire Reference Chart 4
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota rav 4 2012-2013
Automotive Data Solutions Inc. © 2014 3
87654321 109
282221 26 27
1211
25242320
1413
18 19171615
A
HG
A
G
H
6
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
NOT CONNECTED
MAESTRO RR MODULE
CONNECT TOAFTERMARKET RADIO
C- LOCATED BEHIND RADIO
SWI 1SWI 1SWI 2SWI 2SWI FEEDSWI FEED
PURPLE/RED - PURPLE/RED - SWI CIRCUIT 1 INPUT
BLACK/WHITE - BLACK/WHITE - SWI GROUND FEED (-) OUTPUT
WIRES FROMVEHICLE
PINK/RED - PINK/RED - SWI CIRCUIT 2 INPUT
WIRING DIAGRAM
STEP 2
STEP 3
STEP 4NOT CONNECTED
YELLOW - 12V (+) INPUT
BLACK - GROUND
GRAY/RED - ACCESSORY (+) INPUT
BLACKBLACK
REDRED
YELLOWYELLOW
OBDII CONNECTORLOCATED UNDER DRIVER SIDE DASH
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
BROWN/RED - CANH
BROWN/YELLOW - CANL
STEP 1
CANHCANH
CANLCANL
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota rav 4 2012-2013
Automotive Data Solutions Inc. © 2014 4
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CanH A ~ 16 pin 06 Black (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 White (DATA) OBDII connector, under driver side dash
SWI 1 C ~ 28 pin 21 White (DATA) Behind radio
SWI 2 C ~ 28 pin 22 Red (DATA) Behind radio
SWI Feed C ~ 28 pin 23 Black (-) Behind radio
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SI)-TOY01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Compatible Radio
INSTALL GUIDETOyOTA RAv 4
2014-2015retains steering wheel controls and adds gauges
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota rav 4 2014-2015
Automotive Data Solutions Inc. © 2014 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Wiring Diagram 3
Vehicle Wire Reference Chart 4
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota rav 4 2014-2015
Automotive Data Solutions Inc. © 2014 3
87654321 109
282221 26 27
1211
25242320
1413
18 19171615
A
HG
A
G
H
2
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
NOT CONNECTED
MAESTRO RR MODULE
CONNECT TOAFTERMARKET RADIO
C- LOCATED BEHIND RADIO
SWI 1SWI 1
SWI 3SWI 3
SWI 2SWI 2SWI FEEDSWI FEED
PURPLE/RED - PURPLE/RED - SWI CIRCUIT 1 INPUT
ORANGE/RED - ORANGE/RED - SWI CIRCUIT 3 INPUTBLACK/WHITE - BLACK/WHITE - SWI GROUND FEED (-) OUTPUT
WIRES FROMVEHICLE
PINK/RED - PINK/RED - SWI CIRCUIT 2 INPUT
WIRING DIAGRAM
STEP 2
STEP 3
STEP 4NOT CONNECTED
YELLOW - 12V (+) INPUT
BLACK - GROUND
GRAY/RED - ACCESSORY (+) INPUT
BLACKBLACK
REDRED
YELLOWYELLOW
OBDII CONNECTORLOCATED UNDER DRIVER SIDE DASH
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
BROWN/RED - CANH
BROWN/YELLOW - CANL
STEP 1
CANHCANH
CANLCANL
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota rav 4 2014-2015
Automotive Data Solutions Inc. © 2014 4
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CanH A ~ 16 pin 06 Green (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 Red (DATA) OBDII connector, under driver side dash
SWI 1 C ~ 28 pin 21 White (DATA) Behind radio
SWI 2 C ~ 28 pin 22 Red (DATA) Behind radio
SWI 3 C ~ 28 pin 24 Green (DATA) Behind radio
SWI Feed C ~ 28 pin 23 Black (-) Behind radio
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SI)-TOY01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Compatible Radio
INSTALL GUIDETOyOTA SEQUOIA
2008-2012retains steering wheel controls and adds gauges
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota seQuoia 2008-2012
Automotive Data Solutions Inc. © 2014 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Wiring Diagram 3
Vehicle Wire Reference Chart 4
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota seQuoia 2008-2012
Automotive Data Solutions Inc. © 2014 3
3 4 5 62 9 10
11
7
13 14 15 16
1 8
12 17 19 2018
A
HG
A
G
H
1
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
NOT CONNECTED
NOT CONNECTED
OBDII CONNECTORLOCATED UNDER DRIVER SIDE DASH
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
MAESTRO RR MODULE
CONNECT TOAFTERMARKET RADIO
BROWN/RED - CANH
B- LOCATED BEHIND RADIO
SWI 1SWI 1
SWI 2SWI 2
SWI FEEDSWI FEED
PURPLE/RED - PURPLE/RED - SWI CIRCUIT 1 INPUT
BLACK/WHITE - BLACK/WHITE - SWI GROUND FEED (-) OUTPUT
BROWN/YELLOW - CANL
WIRES FROMVEHICLE
PINK/RED - PINK/RED - SWI CIRCUIT 2 INPUT
WIRING DIAGRAMSTEP 1
STEP 2
STEP 3
STEP 4
YELLOW - 12V (+) INPUT
BLACK - GROUND
GRAY/RED - ACCESSORY (+) INPUT
BLACKBLACK
REDRED
YELLOWYELLOW
CANHCANH
CANLCANL
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota seQuoia 2008-2012
Automotive Data Solutions Inc. © 2014 4
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CanH A ~ 16 pin 06 Violet (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 White (DATA) OBDII connector, under driver side dash
SWI 1 B ~ 20 pin 07 LtGreen (DATA) Behind radio
SWI 2 B ~ 20 pin 08 Gray (DATA) Behind radio
SWI Feed B ~ 20 pin 06 Brown (-) Behind radio
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SI)-TOY01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Compatible Radio
INSTALL GUIDETOyOTA SEQUOIA
2013retains steering wheel controls and adds gauges
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota seQuoia 2013
Automotive Data Solutions Inc. © 2014 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Wiring Diagram 3
Vehicle Wire Reference Chart 4
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota seQuoia 2013
Automotive Data Solutions Inc. © 2014 3
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
3 4 5 62 9 10
11
7
13 14 15 16
1 8
12 17 19 2018
A
HG
A
G
H
3
87654321 109
282221 26 27
1211
25242320
1413
18 19171615
NOT CONNECTED
NOT CONNECTED
OR
MAESTRO RR MODULE
B- LOCATED BEHIND RADIO
SWI 1SWI 1SWI 2SWI 2SWI FEEDSWI FEED
SWI 1SWI 1
SWI 2SWI 2
SWI FEEDSWI FEED
PURPLE/RED - PURPLE/RED - SWI CIRCUIT 1 INPUT
BLACK/WHITE - BLACK/WHITE - SWI GROUND FEED (-) OUTPUT
WIRES FROMVEHICLE
PINK/RED - PINK/RED - SWI CIRCUIT 2 INPUT
WIRING DIAGRAM
STEP 2
STEP 4
SWI 1SWI 1SWI 2SWI 2SWI FEEDSWI FEED
OBDII CONNECTORLOCATED UNDER DRIVER SIDE DASH
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
BROWN/RED - CANH
BROWN/YELLOW - CANL
STEP 1
CANHCANH
CANLCANL
CONNECT TOAFTERMARKET RADIO
STEP 3
YELLOW - 12V (+) INPUT
BLACK - GROUND
GRAY/RED - ACCESSORY (+) INPUT
BLACKBLACK
REDRED
YELLOWYELLOW
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota seQuoia 2013
Automotive Data Solutions Inc. © 2014 4
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CanH A ~ 16 pin 06 Violet (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 White (DATA) OBDII connector, under driver side dash
SWI 1 B ~ 20 or 28 pin 07 or 21 LtGreen (DATA) Behind radio
SWI 2 B ~ 20 or 28 pin 08 or 22 Gray (DATA) Behind radio
SWI Feed B ~ 20 or 28 pin 06 or 23 Brown (-) Behind radio
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SI)-TOY01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Compatible Radio
INSTALL GUIDETOyOTA SEQUOIA
2014-2015retains steering wheel controls and adds gauges
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota seQuoia 2014-2015
Automotive Data Solutions Inc. © 2014 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Wiring Diagram 3
Vehicle Wire Reference Chart 4
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota seQuoia 2014-2015
Automotive Data Solutions Inc. © 2014 3
87654321 109
282221 26 27
1211
25242320
1413
18 19171615
A
HG
A
G
H
2
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
NOT CONNECTED
MAESTRO RR MODULE
CONNECT TOAFTERMARKET RADIO
C- LOCATED BEHIND RADIO
SWI 1SWI 1
SWI 3SWI 3
SWI 2SWI 2SWI FEEDSWI FEED
PURPLE/RED - PURPLE/RED - SWI CIRCUIT 1 INPUT
ORANGE/RED - ORANGE/RED - SWI CIRCUIT 3 INPUTBLACK/WHITE - BLACK/WHITE - SWI GROUND FEED (-) OUTPUT
WIRES FROMVEHICLE
PINK/RED - PINK/RED - SWI CIRCUIT 2 INPUT
WIRING DIAGRAM
STEP 2
STEP 3
STEP 4NOT CONNECTED
YELLOW - 12V (+) INPUT
BLACK - GROUND
GRAY/RED - ACCESSORY (+) INPUT
BLACKBLACK
REDRED
YELLOWYELLOW
OBDII CONNECTORLOCATED UNDER DRIVER SIDE DASH
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
BROWN/RED - CANH
BROWN/YELLOW - CANL
STEP 1
CANHCANH
CANLCANL
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota seQuoia 2014-2015
Automotive Data Solutions Inc. © 2014 4
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CanH A ~ 16 pin 06 Violet (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 White (DATA) OBDII connector, under driver side dash
SWI 1 B ~ 28 pin 21 Green (DATA) Behind radio
SWI 2 B ~ 28 pin 22 Gray (DATA) Behind radio
SWI 3 B ~ 28 pin 24 White (DATA) Behind radio
SWI Feed B ~ 28 pin 23 Brown (-) Behind radio
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SI)-TOY01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Compatible Radio
INSTALL GUIDETOyOTA SIENNA
2007-2010retains steering wheel controls and adds gauges
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota sienna 2007-2010
Automotive Data Solutions Inc. © 2014 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Wiring Diagram 3
Vehicle Wire Reference Chart 4
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota sienna 2007-2010
Automotive Data Solutions Inc. © 2014 3
3 4 5 62 9 10
11
7
13 14 15 16
1 8
12 17 19 2018
A
HG
A
G
H
1
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
NOT CONNECTED
NOT CONNECTED
OBDII CONNECTORLOCATED UNDER DRIVER SIDE DASH
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
MAESTRO RR MODULE
CONNECT TOAFTERMARKET RADIO
BROWN/RED - CANH
B- LOCATED BEHIND RADIO
SWI 1SWI 1
SWI 2SWI 2
SWI FEEDSWI FEED
PURPLE/RED - PURPLE/RED - SWI CIRCUIT 1 INPUT
BLACK/WHITE - BLACK/WHITE - SWI GROUND FEED (-) OUTPUT
BROWN/YELLOW - CANL
WIRES FROMVEHICLE
PINK/RED - PINK/RED - SWI CIRCUIT 2 INPUT
WIRING DIAGRAMSTEP 1
STEP 2
STEP 3
STEP 4
YELLOW - 12V (+) INPUT
BLACK - GROUND
GRAY/RED - ACCESSORY (+) INPUT
BLACKBLACK
REDRED
YELLOWYELLOW
CANHCANH
CANLCANL
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota sienna 2007-2010
Automotive Data Solutions Inc. © 2014 4
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CanH A ~ 16 pin 06 Black (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 White (DATA) OBDII connector, under driver side dash
SWI 1 B ~ 20 pin 07 LtGreen (DATA) Behind radio
SWI 2 B ~ 20 pin 08 Blue (DATA) Behind radio
SWI Feed B ~ 20 pin 06 Yellow (-) Behind radio
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SI)-TOY01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Compatible Radio
INSTALL GUIDETOyOTA SIENNA
2011-2014retains steering wheel controls and adds gauges
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota sienna 2011-2014
Automotive Data Solutions Inc. © 2014 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Wiring Diagram 3
Vehicle Wire Reference Chart 4
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota sienna 2011-2014
Automotive Data Solutions Inc. © 2014 3
3 4 5 62 9 10
11
7
13 14 15 16
1 8
12 17 19 2018
A
HG
A
G
H
1
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
NOT CONNECTED
NOT CONNECTED
OBDII CONNECTORLOCATED UNDER DRIVER SIDE DASH
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
MAESTRO RR MODULE
CONNECT TOAFTERMARKET RADIO
BROWN/RED - CANH
B- LOCATED BEHIND RADIO
SWI 1SWI 1
SWI 2SWI 2
SWI FEEDSWI FEED
PURPLE/RED - PURPLE/RED - SWI CIRCUIT 1 INPUT
BLACK/WHITE - BLACK/WHITE - SWI GROUND FEED (-) OUTPUT
BROWN/YELLOW - CANL
WIRES FROMVEHICLE
PINK/RED - PINK/RED - SWI CIRCUIT 2 INPUT
WIRING DIAGRAMSTEP 1
STEP 2
STEP 3
STEP 4
YELLOW - 12V (+) INPUT
BLACK - GROUND
GRAY/RED - ACCESSORY (+) INPUT
BLACKBLACK
REDRED
YELLOWYELLOW
CANHCANH
CANLCANL
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota sienna 2011-2014
Automotive Data Solutions Inc. © 2014 4
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CanH A ~ 16 pin 06 Red (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 White (DATA) OBDII connector, under driver side dash
SWI 1 B ~ 20 pin 07 Black (DATA) Behind radio
SWI 2 B ~ 20 pin 08 LtGreen (DATA) Behind radio
SWI Feed B ~ 20 pin 06 LtBlue (-) Behind radio
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SI)-TOY01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Compatible Radio
INSTALL GUIDETOyOTA TACOMA
2010-2011retains steering wheel controls and adds gauges
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota tacoma 2010-2011
Automotive Data Solutions Inc. © 2014 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Wiring Diagram 3
Vehicle Wire Reference Chart 4
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota tacoma 2010-2011
Automotive Data Solutions Inc. © 2014 3
3 4 5 62 9 10
11
7
13 14 15 16
1 8
12 17 19 2018
A
HG
A
G
H
1
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
NOT CONNECTED
NOT CONNECTED
OBDII CONNECTORLOCATED UNDER DRIVER SIDE DASH
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
MAESTRO RR MODULE
CONNECT TOAFTERMARKET RADIO
BROWN/RED - CANH
B- LOCATED BEHIND RADIO
SWI 1SWI 1
SWI 2SWI 2
SWI FEEDSWI FEED
PURPLE/RED - PURPLE/RED - SWI CIRCUIT 1 INPUT
BLACK/WHITE - BLACK/WHITE - SWI GROUND FEED (-) OUTPUT
BROWN/YELLOW - CANL
WIRES FROMVEHICLE
PINK/RED - PINK/RED - SWI CIRCUIT 2 INPUT
WIRING DIAGRAMSTEP 1
STEP 2
STEP 3
STEP 4
YELLOW - 12V (+) INPUT
BLACK - GROUND
GRAY/RED - ACCESSORY (+) INPUT
BLACKBLACK
REDRED
YELLOWYELLOW
CANHCANH
CANLCANL
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota tacoma 2010-2011
Automotive Data Solutions Inc. © 2014 4
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CanH A ~ 16 pin 06 Yellow/Black (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 Blue/White (DATA) OBDII connector, under driver side dash
SWI 1 B ~ 20 pin 07 Violet/White (DATA) Behind radio
SWI 2 B ~ 20 pin 08 Yellow/Black (DATA) Behind radio
SWI Feed B ~ 20 pin 06 White/Red (-) Behind radio
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SI)-TOY01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Compatible Radio
INSTALL GUIDETOyOTA TACOMA
2012-2013retains steering wheel controls and adds gauges
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota tacoma 2012-2013
Automotive Data Solutions Inc. © 2014 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Wiring Diagram 3
Vehicle Wire Reference Chart 4
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota tacoma 2012-2013
Automotive Data Solutions Inc. © 2014 3
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
3 4 5 62 9 10
11
7
13 14 15 16
1 8
12 17 19 2018
A
HG
A
G
H
3
87654321 109
282221 26 27
1211
25242320
1413
18 19171615
NOT CONNECTED
NOT CONNECTED
OR
MAESTRO RR MODULE
B- LOCATED BEHIND RADIO
SWI 1SWI 1SWI 2SWI 2SWI FEEDSWI FEED
SWI 1SWI 1
SWI 2SWI 2
SWI FEEDSWI FEED
PURPLE/RED - PURPLE/RED - SWI CIRCUIT 1 INPUT
BLACK/WHITE - BLACK/WHITE - SWI GROUND FEED (-) OUTPUT
WIRES FROMVEHICLE
PINK/RED - PINK/RED - SWI CIRCUIT 2 INPUT
WIRING DIAGRAM
STEP 2
STEP 4
SWI 1SWI 1SWI 2SWI 2SWI FEEDSWI FEED
OBDII CONNECTORLOCATED UNDER DRIVER SIDE DASH
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
BROWN/RED - CANH
BROWN/YELLOW - CANL
STEP 1
CANHCANH
CANLCANL
CONNECT TOAFTERMARKET RADIO
STEP 3
YELLOW - 12V (+) INPUT
BLACK - GROUND
GRAY/RED - ACCESSORY (+) INPUT
BLACKBLACK
REDRED
YELLOWYELLOW
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota tacoma 2012-2013
Automotive Data Solutions Inc. © 2014 4
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CanH A ~ 16 pin 06 Yellow/Black (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 Blue/White (DATA) OBDII connector, under driver side dash
SWI 1 B ~ 20 or 28 pin 07 or 21 Violet/White (DATA) Behind radio
SWI 2 B ~ 20 or 28 pin 08 or 22 Yellow/Black (DATA) Behind radio
SWI Feed B ~ 20 or 28 pin 06 or 23 White/Red (-) Behind radio
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SI)-TOY01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Compatible Radio
INSTALL GUIDETOyOTA TACOMA
2014-2015retains steering wheel controls and adds gauges
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota tacoma 2014-2015
Automotive Data Solutions Inc. © 2014 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Wiring Diagram 3
Vehicle Wire Reference Chart 4
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota tacoma 2014-2015
Automotive Data Solutions Inc. © 2014 3
87654321 109
282221 26 27
1211
25242320
1413
18 19171615
A
HG
A
G
H
2
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
NOT CONNECTED
MAESTRO RR MODULE
CONNECT TOAFTERMARKET RADIO
C- LOCATED BEHIND RADIO
SWI 1SWI 1
SWI 3SWI 3
SWI 2SWI 2SWI FEEDSWI FEED
PURPLE/RED - PURPLE/RED - SWI CIRCUIT 1 INPUT
ORANGE/RED - ORANGE/RED - SWI CIRCUIT 3 INPUTBLACK/WHITE - BLACK/WHITE - SWI GROUND FEED (-) OUTPUT
WIRES FROMVEHICLE
PINK/RED - PINK/RED - SWI CIRCUIT 2 INPUT
WIRING DIAGRAM
STEP 2
STEP 3
STEP 4NOT CONNECTED
YELLOW - 12V (+) INPUT
BLACK - GROUND
GRAY/RED - ACCESSORY (+) INPUT
BLACKBLACK
REDRED
YELLOWYELLOW
OBDII CONNECTORLOCATED UNDER DRIVER SIDE DASH
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
BROWN/RED - CANH
BROWN/YELLOW - CANL
STEP 1
CANHCANH
CANLCANL
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota tacoma 2014-2015
Automotive Data Solutions Inc. © 2014 4
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CanH A ~ 16 pin 06 Yellow/Black (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 Blue/White (DATA) OBDII connector, under driver side dash
SWI 1 B ~ 28 pin 21 Violet/White (DATA) Behind radio
SWI 2 B ~ 28 pin 22 Yellow/Black (DATA) Behind radio
SWI 3 B ~ 28 pin 24 Black (DATA) Behind radio
SWI Feed B ~ 28 pin 23 White/Red (-) Behind radio
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SI)-TOY01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Compatible Radio
INSTALL GUIDETOyOTA TUNDRA
2006-2013retains steering wheel controls and adds gauges
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota tundra 2006-2013
Automotive Data Solutions Inc. © 2014 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Wiring Diagram 3
Vehicle Wire Reference Chart 4
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota tundra 2006-2013
Automotive Data Solutions Inc. © 2014 3
3 4 5 62 9 10
11
7
13 14 15 16
1 8
12 17 19 2018
A
HG
A
G
H
1
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
NOT CONNECTED
NOT CONNECTED
OBDII CONNECTORLOCATED UNDER DRIVER SIDE DASH
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
MAESTRO RR MODULE
CONNECT TOAFTERMARKET RADIO
BROWN/RED - CANH
B- LOCATED BEHIND RADIO
SWI 1SWI 1
SWI 2SWI 2
SWI FEEDSWI FEED
PURPLE/RED - PURPLE/RED - SWI CIRCUIT 1 INPUT
BLACK/WHITE - BLACK/WHITE - SWI GROUND FEED (-) OUTPUT
BROWN/YELLOW - CANL
WIRES FROMVEHICLE
PINK/RED - PINK/RED - SWI CIRCUIT 2 INPUT
WIRING DIAGRAMSTEP 1
STEP 2
STEP 3
STEP 4
YELLOW - 12V (+) INPUT
BLACK - GROUND
GRAY/RED - ACCESSORY (+) INPUT
BLACKBLACK
REDRED
YELLOWYELLOW
CANHCANH
CANLCANL
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota tundra 2006-2013
Automotive Data Solutions Inc. © 2014 4
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CanH A ~ 16 pin 06 Violet (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 White (DATA) OBDII connector, under driver side dash
SWI 1 B ~ 20 pin 07 LtGreen (DATA) Behind radio
SWI 2 B ~ 20 pin 08 Gray (DATA) Behind radio
SWI Feed B ~ 20 pin 06 Brown (-) Behind radio
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SI)-TOY01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Compatible Radio
INSTALL GUIDETOyOTA TUNDRA
2014-2015retains steering wheel controls and adds gauges
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota tundra 2014-2015
Automotive Data Solutions Inc. © 2014 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Wiring Diagram 3
Vehicle Wire Reference Chart 4
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota tundra 2014-2015
Automotive Data Solutions Inc. © 2014 3
87654321 109
282221 26 27
1211
25242320
1413
18 19171615
A
HG
A
G
H
2
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
NOT CONNECTED
MAESTRO RR MODULE
CONNECT TOAFTERMARKET RADIO
C- LOCATED BEHIND RADIO
SWI 1SWI 1
SWI 3SWI 3
SWI 2SWI 2SWI FEEDSWI FEED
PURPLE/RED - PURPLE/RED - SWI CIRCUIT 1 INPUT
ORANGE/RED - ORANGE/RED - SWI CIRCUIT 3 INPUTBLACK/WHITE - BLACK/WHITE - SWI GROUND FEED (-) OUTPUT
WIRES FROMVEHICLE
PINK/RED - PINK/RED - SWI CIRCUIT 2 INPUT
WIRING DIAGRAM
STEP 2
STEP 3
STEP 4NOT CONNECTED
YELLOW - 12V (+) INPUT
BLACK - GROUND
GRAY/RED - ACCESSORY (+) INPUT
BLACKBLACK
REDRED
YELLOWYELLOW
OBDII CONNECTORLOCATED UNDER DRIVER SIDE DASH
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
BROWN/RED - CANH
BROWN/YELLOW - CANL
STEP 1
CANHCANH
CANLCANL
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota tundra 2014-2015
Automotive Data Solutions Inc. © 2014 4
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CanH A ~ 16 pin 06 Violet (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 White (DATA) OBDII connector, under driver side dash
SWI 1 B ~ 28 pin 21 Violet/White (DATA) Behind radio
SWI 2 B ~ 28 pin 22 Yellow/Black (DATA) Behind radio
SWI 3 B ~ 28 pin 24 Black (DATA) Behind radio
SWI Feed B ~ 28 pin 23 White/Red (-) Behind radio
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SI)-TOY01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Compatible Radio
INSTALL GUIDETOyOTA vENzA
2009-2012retains steering wheel controls and adds gauges
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota venza 2009-2012
Automotive Data Solutions Inc. © 2014 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Wiring Diagram 3
Vehicle Wire Reference Chart 4
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota venza 2009-2012
Automotive Data Solutions Inc. © 2014 3
3 4 5 62 9 10
11
7
13 14 15 16
1 8
12 17 19 2018
A
HG
A
G
H
1
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
NOT CONNECTED
NOT CONNECTED
OBDII CONNECTORLOCATED UNDER DRIVER SIDE DASH
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
MAESTRO RR MODULE
CONNECT TOAFTERMARKET RADIO
BROWN/RED - CANH
B- LOCATED BEHIND RADIO
SWI 1SWI 1
SWI 2SWI 2
SWI FEEDSWI FEED
PURPLE/RED - PURPLE/RED - SWI CIRCUIT 1 INPUT
BLACK/WHITE - BLACK/WHITE - SWI GROUND FEED (-) OUTPUT
BROWN/YELLOW - CANL
WIRES FROMVEHICLE
PINK/RED - PINK/RED - SWI CIRCUIT 2 INPUT
WIRING DIAGRAMSTEP 1
STEP 2
STEP 3
STEP 4
YELLOW - 12V (+) INPUT
BLACK - GROUND
GRAY/RED - ACCESSORY (+) INPUT
BLACKBLACK
REDRED
YELLOWYELLOW
CANHCANH
CANLCANL
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota venza 2009-2012
Automotive Data Solutions Inc. © 2014 4
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CanH A ~ 16 pin 06 Yellow (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 White (DATA) OBDII connector, under driver side dash
SWI 1 B ~ 20 pin 07 Gray (DATA) Behind radio
SWI 2 B ~ 20 pin 08 LtGreen (DATA) Behind radio
SWI Feed B ~ 20 pin 06 Red (-) Behind radio
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SI)-TOY01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Compatible Radio
INSTALL GUIDETOyOTA vENzA
2013-2015retains steering wheel controls and adds gauges
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota venza 2013-2015
Automotive Data Solutions Inc. © 2014 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Wiring Diagram 3
Vehicle Wire Reference Chart 4
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota venza 2013-2015
Automotive Data Solutions Inc. © 2014 3
87654321 109
282221 26 27
1211
25242320
1413
18 19171615
A
HG
A
G
H
2
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
NOT CONNECTED
MAESTRO RR MODULE
CONNECT TOAFTERMARKET RADIO
C- LOCATED BEHIND RADIO
SWI 1SWI 1
SWI 3SWI 3
SWI 2SWI 2SWI FEEDSWI FEED
PURPLE/RED - PURPLE/RED - SWI CIRCUIT 1 INPUT
ORANGE/RED - ORANGE/RED - SWI CIRCUIT 3 INPUTBLACK/WHITE - BLACK/WHITE - SWI GROUND FEED (-) OUTPUT
WIRES FROMVEHICLE
PINK/RED - PINK/RED - SWI CIRCUIT 2 INPUT
WIRING DIAGRAM
STEP 2
STEP 3
STEP 4NOT CONNECTED
YELLOW - 12V (+) INPUT
BLACK - GROUND
GRAY/RED - ACCESSORY (+) INPUT
BLACKBLACK
REDRED
YELLOWYELLOW
OBDII CONNECTORLOCATED UNDER DRIVER SIDE DASH
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
BROWN/RED - CANH
BROWN/YELLOW - CANL
STEP 1
CANHCANH
CANLCANL
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota venza 2013-2015
Automotive Data Solutions Inc. © 2014 4
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CanH A ~ 16 pin 06 Yellow (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 White (DATA) OBDII connector, under driver side dash
SWI 1 B ~ 28 pin 21 Gray (DATA) Behind radio
SWI 2 B ~ 28 pin 22 LtGreen (DATA) Behind radio
SWI 3 B ~ 28 pin 24 Blue (DATA) Behind radio
SWI Feed B ~ 28 pin 23 Red (-) Behind radio
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SI)-TOY01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Compatible Radio
INSTALL GUIDETOyOTA yARIS
2006-2011retains steering wheel controls and adds gauges
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota yaris 2006-2011
Automotive Data Solutions Inc. © 2014 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Wiring Diagram 3
Vehicle Wire Reference Chart 4
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota yaris 2006-2011
Automotive Data Solutions Inc. © 2014 3
3 4 5 62 9 10
11
7
13 14 15 16
1 8
12 17 19 2018
A
HG
A
G
H
1
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
NOT CONNECTED
NOT CONNECTED
OBDII CONNECTORLOCATED UNDER DRIVER SIDE DASH
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
MAESTRO RR MODULE
CONNECT TOAFTERMARKET RADIO
BROWN/RED - CANH
B- LOCATED BEHIND RADIO
SWI 1SWI 1
SWI 2SWI 2
SWI FEEDSWI FEED
PURPLE/RED - PURPLE/RED - SWI CIRCUIT 1 INPUT
BLACK/WHITE - BLACK/WHITE - SWI GROUND FEED (-) OUTPUT
BROWN/YELLOW - CANL
WIRES FROMVEHICLE
PINK/RED - PINK/RED - SWI CIRCUIT 2 INPUT
WIRING DIAGRAMSTEP 1
STEP 2
STEP 3
STEP 4
YELLOW - 12V (+) INPUT
BLACK - GROUND
GRAY/RED - ACCESSORY (+) INPUT
BLACKBLACK
REDRED
YELLOWYELLOW
CANHCANH
CANLCANL
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota yaris 2006-2011
Automotive Data Solutions Inc. © 2014 4
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CanH A ~ 16 pin 06 Violet (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 White (DATA) OBDII connector, under driver side dash
SWI 1 B ~ 20 pin 07 N/A (DATA) Behind radio
SWI 2 B ~ 20 pin 08 N/A (DATA) Behind radio
SWI Feed B ~ 20 pin 06 N/A (-) Behind radio
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SI)-TOY01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Compatible Radio
INSTALL GUIDETOyOTA yARIS
2012-2015retains steering wheel controls and adds gauges
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota yaris 2012-2015
Automotive Data Solutions Inc. © 2014 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Wiring Diagram 3
Vehicle Wire Reference Chart 4
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota yaris 2012-2015
Automotive Data Solutions Inc. © 2014 3
87654321 109
282221 26 27
1211
25242320
1413
18 19171615
A
HG
A
G
H
6
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
NOT CONNECTED
MAESTRO RR MODULE
CONNECT TOAFTERMARKET RADIO
C- LOCATED BEHIND RADIO
SWI 1SWI 1SWI 2SWI 2SWI FEEDSWI FEED
PURPLE/RED - PURPLE/RED - SWI CIRCUIT 1 INPUT
BLACK/WHITE - BLACK/WHITE - SWI GROUND FEED (-) OUTPUT
WIRES FROMVEHICLE
PINK/RED - PINK/RED - SWI CIRCUIT 2 INPUT
WIRING DIAGRAM
STEP 2
STEP 3
STEP 4NOT CONNECTED
YELLOW - 12V (+) INPUT
BLACK - GROUND
GRAY/RED - ACCESSORY (+) INPUT
BLACKBLACK
REDRED
YELLOWYELLOW
OBDII CONNECTORLOCATED UNDER DRIVER SIDE DASH
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
BROWN/RED - CANH
BROWN/YELLOW - CANL
STEP 1
CANHCANH
CANLCANL
ADS-RR(SI)-TOY01-DS maestro.idatalink.com
toyota yaris 2012-2015
Automotive Data Solutions Inc. © 2014 4
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CanH A ~ 16 pin 06 Gray (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 White (DATA) OBDII connector, under driver side dash
SWI 1 C ~ 28 pin 21 Blue (DATA) Behind radio
SWI 2 C ~ 28 pin 22 Pink (DATA) Behind radio
SWI Feed C ~ 28 pin 23 Red (-) Behind radio