hss - futuresupreme.com · hss, straight shank drills gold-p coated hssco8, straight shank drills...
TRANSCRIPT
Being the best through innovationHSS
-
GOLD-P COATING, HSS & 8% COBALT
GOLD-P DRILLS
SELECTION GUIDE
140• phone:+82-32-526-0909, fax:+82-32-526-4373, www.yg1.kr, E-mail:[email protected]
HSS, STRAIGHT SHANK DRILLS GOLD-P COATED
HSSCo8, STRAIGHT SHANK DRILLS GOLD-P COATED
REGULAR
REGULAR
D1GP103
D2GP191
GOLD-P
DRILL
SETS
D1.0
D1.0
D13.0
D13.0
142
144
146
1.0mm ~ 10.0mm×0.5mm STEP
SET1(19PCS)
1.0mm ~ 13.0mm×0.5mm STEP
SET2(25PCS)
ITEM MODEL DESCRIPTIONSIZE
MIN MAXPAGE
HSS GOLD-P DRILLS
141•phone:+82-32-526-0909, fax:+82-32-526-4373, www.yg1.kr, E-mail:[email protected]
GOLD-P DRILLS (GOLD-P COATED)Competitive price and same performance as full TiN coating
◎
◎
◎
◎
○
○
○
○
○
○
○
○
◎
◎
CarbonSteels Alloy Steels Prehardened
SteelsCast Iron Aluminum Stainless
Steels Titanium Mild Steels Copper BronzeHardened Steels
~HB225 HB225~325 HRc30~45 HRc45~55 HRc55~
◎ : (Excellent)◯ : (Good)
142• phone:+82-32-526-0909, fax:+82-32-526-4373, www.yg1.kr, E-mail:[email protected]
GOLD-P DRILLS
i-DREAM DRILLS
DREAMDRILLS-GENERAL
DREAMDRILLS-SOFT
DREAMDRILLS-INOX
DREAMDRILLS-MQL TYPE
DREAMDRILLSfor HARDENEDSTEELS
GENERALCARBIDEDRILLS
NC-SPOTTINGDRILLS
MULTI-1DRILLS
HPD DRILLS
GOLD-PDRILLS
WORMPATTERNDRILLS
STRAIGHTSHANKDRILLS
TAPERSHANKDRILLS
NC-SPOTTINGDRILLS
CENTERDRILLS
SPADEDRILLS
TECHNICALDATA
CARBIDE
HSSD1GP103 SERIES
118
▶
▶
▶
▶
▶Flute Geometry : Right hand spiral▶Point Angle : 118˚, Normal point▶Surface treatment : Bright body TiN coating on working part▶Application : Drilling in steel, cast steel alloyed and Non-
alloyed, gray cast iron, graphite, malleable castiron
D1GP103010D1GP103011D1GP103012D1GP103013D1GP103014D1GP103015D1GP103016D1GP103017D1GP103018D1GP103019D1GP103020D1GP103021D1GP103022D1GP103023D1GP103024D1GP103025D1GP103026D1GP103027D1GP103028D1GP103029D1GP103030D1GP103031D1GP103032D1GP103033D1GP103034D1GP103035D1GP103036D1GP103037D1GP103038D1GP103039D1GP103040
1.01.11.21.31.41.51.61.71.81.92.02.12.22.32.42.52.62.72.82.93.03.13.23.33.43.53.63.73.83.94.0
18202022232325252828292933333535373739424242424545454848485154
40424245484850505252555558586161646467717171717373737676767983
(Unit) : mm
HSS, STRAIGHT SHANK DRILLS GOLD-P COATED (JIS)
L2
L1
D1
D1GP103041D1GP103042D1GP103043D1GP103044D1GP103045D1GP103046D1GP103047D1GP103048D1GP103049D1GP103050D1GP103051D1GP103052D1GP103053D1GP103054D1GP103055D1GP103056D1GP103057D1GP103058D1GP103059D1GP103060D1GP103061D1GP103062D1GP103063D1GP103064D1GP103065D1GP103066D1GP103067D1GP103068D1GP103069D1GP103070D1GP103071
4.14.24.34.44.54.64.74.84.95.05.15.25.35.45.55.65.75.85.96.06.16.26.36.46.56.66.76.86.97.07.1
54545456565659596262626464646467676767707070707373737373737375
83838386868689899292929595959598989898102102102102105105105105105105105108
REGULAR
◎ ◎ ○ ○ ○ ○ ◎
P.147
EDP No.OverallLength
L2
FluteLength
L1
DrillDiameter
D1
EDP No.OverallLength
L2
FluteLength
L1
DrillDiameter
D1
CarbonSteels
~HB225
Alloy Steels
HB225~325
PrehardenedSteels
HRc30~45
Hardened Steels
HRc45~55 HRc55~Cast Iron Aluminum Stainless
Steels Titanium Mild Steels Copper Bronze
◎ : (Excellent) ◯ : (Good)
143•phone:+82-32-526-0909, fax:+82-32-526-4373, www.yg1.kr, E-mail:[email protected]
GOLD-P DRILLS
i-DREAM DRILLS
DREAMDRILLS-GENERAL
DREAMDRILLS-SOFT
DREAMDRILLS-INOX
DREAMDRILLS-MQL TYPE
DREAMDRILLSfor HARDENEDSTEELS
GENERALCARBIDEDRILLS
NC-SPOTTINGDRILLS
MULTI-1DRILLS
HPD DRILLS
GOLD-PDRILLS
WORMPATTERNDRILLS
STRAIGHTSHANKDRILLS
TAPERSHANKDRILLS
NC-SPOTTINGDRILLS
CENTERDRILLS
SPADEDRILLS
TECHNICALDATA
CARBIDE
HSSD1GP103 SERIES
118
D1GP103072D1GP103073D1GP103074D1GP103075D1GP103076D1GP103077D1GP103078D1GP103079D1GP103080D1GP103081D1GP103082D1GP103083D1GP103084D1GP103085D1GP103086D1GP103087D1GP103088D1GP103089D1GP103090D1GP103091D1GP103092D1GP103093D1GP103094D1GP103095D1GP103096D1GP103097D1GP103098D1GP103099D1GP103100D1GP103101
7.27.37.47.57.67.77.87.98.08.18.28.38.48.58.68.78.88.99.09.19.29.39.49.59.69.79.89.9
10.010.1
757578787881818181848484878787878989898992929292959595959598
108108111111111114114114114117117117121121121121124124124124127127127127130130130130130133
(Unit) : mm
HSS, STRAIGHT SHANK DRILLS GOLD-P COATED (JIS)
D1GP103102D1GP103103D1GP103104D1GP103105D1GP103106D1GP103107D1GP103108D1GP103109D1GP103110D1GP103111D1GP103112D1GP103113D1GP103114D1GP103115D1GP103116D1GP103117D1GP103118D1GP103119D1GP103120D1GP103121D1GP103122D1GP103123D1GP103124D1GP103125D1GP103126D1GP103127D1GP103128D1GP103129D1GP103130
10.210.310.410.510.610.710.810.911.011.111.211.311.411.511.611.711.811.912.012.112.212.312.412.512.612.712.812.913.0
989898
100100100103103103103106106106106109109109109111111111111114114114114114114114
133133133137137137140140140140143143143143146146146146149149149149152152152152152152152
REGULAR
▶
▶
▶
▶
▶Flute Geometry : Right hand spiral▶Point Angle : 118˚, Normal point▶Surface treatment : Bright body TiN coating on working part▶Application : Drilling in steel, cast steel alloyed and Non-
alloyed, gray cast iron, graphite, malleable castiron
L2
L1
D1
P.147
EDP No.OverallLength
L2
FluteLength
L1
DrillDiameter
D1
EDP No.OverallLength
L2
FluteLength
L1
DrillDiameter
D1
◎ ◎ ○ ○ ○ ○ ◎
CarbonSteels
~HB225
Alloy Steels
HB225~325
PrehardenedSteels
HRc30~45
Hardened Steels
HRc45~55 HRc55~Cast Iron Aluminum Stainless
Steels Titanium Mild Steels Copper Bronze
◎ : (Excellent) ◯ : (Good)
144• phone:+82-32-526-0909, fax:+82-32-526-4373, www.yg1.kr, E-mail:[email protected]
GOLD-P DRILLS
i-DREAM DRILLS
DREAMDRILLS-GENERAL
DREAMDRILLS-SOFT
DREAMDRILLS-INOX
DREAMDRILLS-MQL TYPE
DREAMDRILLSfor HARDENEDSTEELS
GENERALCARBIDEDRILLS
NC-SPOTTINGDRILLS
MULTI-1DRILLS
HPD DRILLS
GOLD-PDRILLS
WORMPATTERNDRILLS
STRAIGHTSHANKDRILLS
TAPERSHANKDRILLS
NC-SPOTTINGDRILLS
CENTERDRILLS
SPADEDRILLS
TECHNICALDATA
CARBIDE
HSSD2GP191 SERIES
135
▶
▶
▶
▶
▶Flute Geometry : Right hand spiral▶Point Angle : 135˚, under 1.6mm:Normal point,
from 1.6mm:Split point▶Surface treatment : Bright body TiN coating on working part▶Application : Drilling in stainless steels, materials of difficult
machinability such as titanium alloy andinconel.
HSSCo8, STRAIGHT SHANK DRILLS GOLD-P COATED (JIS)
L2
L1
D1
REGULAR
1.6mm & overunder 1.6mm
D2GP191010D2GP191011D2GP191012D2GP191013D2GP191014D2GP191015D2GP191016D2GP191017D2GP191018D2GP191019D2GP191020D2GP191021D2GP191022D2GP191023D2GP191024D2GP191025D2GP191026D2GP191027D2GP191028D2GP191029D2GP191030D2GP191031D2GP191032D2GP191033D2GP191034D2GP191035D2GP191036D2GP191037D2GP191038D2GP191039D2GP191040
1.01.11.21.31.41.51.61.71.81.92.02.12.22.32.42.52.62.72.82.93.03.13.23.33.43.53.63.73.83.94.0
18202022232325252828292933333535373739424242424545454848485154
40424245484850505252555558586161646467717171717373737676767983
D2GP191041D2GP191042D2GP191043D2GP191044D2GP191045D2GP191046D2GP191047D2GP191048D2GP191049D2GP191050D2GP191051D2GP191052D2GP191053D2GP191054D2GP191055D2GP191056D2GP191057D2GP191058D2GP191059D2GP191060D2GP191061D2GP191062D2GP191063D2GP191064D2GP191065D2GP191066D2GP191067D2GP191068D2GP191069D2GP191070D2GP191071
4.14.24.34.44.54.64.74.84.95.05.15.25.35.45.55.65.75.85.96.06.16.26.36.46.56.66.76.86.97.07.1
54545456565659596262626464646467676767707070707373737373737375
83838386868689899292929595959598989898102102102102105105105105105105105108
P.147
EDP No.OverallLength
L2
FluteLength
L1
DrillDiameter
D1
EDP No.OverallLength
L2
FluteLength
L1
DrillDiameter
D1
◎ ◎ ○ ○ ○ ○ ◎
CarbonSteels
~HB225
Alloy Steels
HB225~325
PrehardenedSteels
HRc30~45
Hardened Steels
HRc45~55 HRc55~Cast Iron Aluminum Stainless
Steels Titanium Mild Steels Copper Bronze
◎ : (Excellent) ◯ : (Good)
(Unit) : mm
145•phone:+82-32-526-0909, fax:+82-32-526-4373, www.yg1.kr, E-mail:[email protected]
GOLD-P DRILLS
i-DREAM DRILLS
DREAMDRILLS-GENERAL
DREAMDRILLS-SOFT
DREAMDRILLS-INOX
DREAMDRILLS-MQL TYPE
DREAMDRILLSfor HARDENEDSTEELS
GENERALCARBIDEDRILLS
NC-SPOTTINGDRILLS
MULTI-1DRILLS
HPD DRILLS
GOLD-PDRILLS
WORMPATTERNDRILLS
STRAIGHTSHANKDRILLS
TAPERSHANKDRILLS
NC-SPOTTINGDRILLS
CENTERDRILLS
SPADEDRILLS
TECHNICALDATA
CARBIDE
HSSD2GP191 SERIES
HSSCo8, STRAIGHT SHANK DRILLS GOLD-P COATED (JIS) REGULAR
▶
▶
▶
▶
▶Flute Geometry : Right hand spiral▶Point Angle : 135˚, under 1.6mm:Normal point,
from 1.6mm:Split point▶Surface treatment : Bright body TiN coating on working part▶Application : Drilling in stainless steels, materials of difficult
machinability such as titanium alloy andinconel.
L2
L1
D1
1.6mm & overunder 1.6mm
135
D2GP191072D2GP191073D2GP191074D2GP191075D2GP191076D2GP191077D2GP191078D2GP191079D2GP191080D2GP191081D2GP191082D2GP191083D2GP191084D2GP191085D2GP191086D2GP191087D2GP191088D2GP191089D2GP191090D2GP191091D2GP191092D2GP191093D2GP191094D2GP191095D2GP191096D2GP191097D2GP191098D2GP191099D2GP191100D2GP191101
7.27.37.47.57.67.77.87.98.08.18.28.38.48.58.68.78.88.99.09.19.29.39.49.59.69.79.89.9
10.010.1
757578787881818181848484878787878989898992929292959595959598
108108111111111114114114114117117117121121121121124124124124127127127127130130130130130133
D2GP191102D2GP191103D2GP191104D2GP191105D2GP191106D2GP191107D2GP191108D2GP191109D2GP191110D2GP191111D2GP191112D2GP191113D2GP191114D2GP191115D2GP191116D2GP191117D2GP191118D2GP191119D2GP191120D2GP191121D2GP191122D2GP191123D2GP191124D2GP191125D2GP191126D2GP191127D2GP191128D2GP191129D2GP191130
10.210.310.410.510.610.710.810.911.011.111.211.311.411.511.611.711.811.912.012.112.212.312.412.512.612.712.812.913.0
989898
100100100103103103103106106106106109109109109111111111111114114114114114114114
133133133137137137140140140140143143143143146146146146149149149149152152152152152152152
P.147
EDP No.OverallLength
L2
FluteLength
L1
DrillDiameter
D1
EDP No.OverallLength
L2
FluteLength
L1
DrillDiameter
D1
◎ ◎ ○ ○ ○ ○ ◎
CarbonSteels
~HB225
Alloy Steels
HB225~325
PrehardenedSteels
HRc30~45
Hardened Steels
HRc45~55 HRc55~Cast Iron Aluminum Stainless
Steels Titanium Mild Steels Copper Bronze
◎ : (Excellent) ◯ : (Good)
(Unit) : mm
i-DREAM DRILLS
DREAMDRILLS-GENERAL
DREAMDRILLS-SOFT
DREAMDRILLS-INOX
DREAMDRILLS-MQL TYPE
DREAMDRILLSfor HARDENEDSTEELS
GENERALCARBIDEDRILLS
NC-SPOTTINGDRILLS
MULTI-1DRILLS
HPD DRILLS
GOLD-PDRILLS
WORMPATTERNDRILLS
STRAIGHTSHANKDRILLS
TAPERSHANKDRILLS
NC-SPOTTINGDRILLS
CENTERDRILLS
SPADEDRILLS
TECHNICALDATA
CARBIDE
HSS
146• phone:+82-32-526-0909, fax:+82-32-526-4373, www.yg1.kr, E-mail:[email protected]
GOLD-P DRILLS
GOLD-P COATED DRILL SETS
JIS DRILL SETS REGULAR LENGTH Gold-P coated Drills
D1GP103SET1 19 pcs
D1GP103SET2 25 pcs
D2GP191SET1 19 pcs
D2GP191SET2 25 pcs
HSS Straight Shank, Normal Point
HSS Straight Shank, Normal Point
HSSCo8 Straight Shank, Split Point (Ø1.0 &Ø1.5 : NORMAL point)
HSSCo8 Straight Shank, Split Point (Ø1.0 &Ø1.5 : NORMAL point)
1.0-10.0x0.5mm step
1.0-13.0x0.5mm step
1.0-10.0x0.5mm step
1.0-13.0x0.5mm step
SET NO. DESCRIPTON SIZE Q’TY
147•phone:+82-32-526-0909, fax:+82-32-526-4373, www.yg1.kr, E-mail:[email protected]
RECOMMENDED CUTTING CONDITIONSGOLD-P DRILLS
i-DREAM DRILLS
DREAMDRILLS-GENERAL
DREAMDRILLS-SOFT
DREAMDRILLS-INOX
DREAMDRILLS-MQL TYPE
DREAMDRILLSfor HARDENEDSTEELS
GENERALCARBIDEDRILLS
NC-SPOTTINGDRILLS
MULTI-1DRILLS
HPD DRILLS
GOLD-PDRILLS
WORMPATTERNDRILLS
STRAIGHTSHANKDRILLS
TAPERSHANKDRILLS
NC-SPOTTINGDRILLS
CENTERDRILLS
SPADEDRILLS
TECHNICALDATA
CARBIDE
HSS
(Unit) : mm
GOLD-P COATED DRILLS
D1GP103, D2GP191 SERIES
1.02.03.04.05.06.07.08.09.0
10.011.012.013.0
14000700046503500280023502000175015501400125011501050
0.020.060.100.110.120.140.160.180.200.210.220.230.23
1250061004100305024502050175015501350125011001000950
0.020.060.080.110.110.130.150.180.220.220.220.220.22
7700385025501950155013001100960855770700650595
0.020.060.080.100.100.120.140.150.180.180.180.200.20
7000350023501750140011501000875780700650585540
0.020.060.080.100.100.120.140.150.180.180.180.200.20
80504050270020001600135011501000895805730670620
0.020.060.080.090.100.120.140.150.170.180.180.200.20
300001500099007450595049504250370033003000270024802300
0.020.060.100.110.120.140.160.180.200.230.230.230.23
115005800385029002300195016501450128011501050960890
0.030.090.130.150.170.190.220.240.270.290.300.310.31
WORKMATERIAL
DIAMETER N S
MAGNESIUMALLOYS
N = R.P.MS = Feed per Revolution (mm/rev.)
N S
ALUMINUMALLOYS,
ZINC ALLOYS
N S
TITANIUMALLOYS
~ 410 N/mm2
N S
STAINLESSSTEELS
HRc23
~ 830 N/mm2
N S
ALLOY STEELS
~ HRc23 ~ 34
810 ~ 1110 N/mm2
N S
CARBON STEELS
~ HRc23
~ 830 N/mm2
N S
CARBONSTEELS
~ 570 N/mm2
HARDNESS
STRENGTH
X5070
CBN
X-POWER
JET-POWER
V7 MILLALU
-POWERD-
POWER
CARBIDE
TANK-POWER
HSS
HSSDRILLS
CARBIDEDRILLS
i-Xmill
i-DREAM DRILL
SPADE DRILLS
END MILLSEND MILLSEND MILLS
DRILLSDRILLSDRILLS
ROTARY
BURRS
ROTARY
BURRS
ROTARY
BURRS
INSERTS INSERTS & &
HOLDERSHOLDERS
INSERTS &
HOLDERS
TOOL HOLDER
TOOL HOLDER
TOOL HOLDER
COUNTERSIN
K
COUNTERSIN
K
COUNTERSIN
K
REAMER
REAMER
REAMER
TA
PS
TA
PS
TA
PS
TH
RE
AD
MIL
LS
TH
RE
AD
MIL
LS
TH
RE
AD
MIL
LS
MILLING CUTTER &
MILLING CUTTER &
COUNTER BORES
COUNTER BORES
MILLING CUTTER &
COUNTER BORES
K-2CARBIDE
Challenge toward a Global Leader-
YG-1 Leads the World Market.