ht install windows 7-27p

7/29/2019 Ht Install Windows 7-27p

1/40

The Ultimate Guide to Installing Windows 7

So, you're ready to install Windows 7? Read on to get guidance on how to approach this

installation and make sure your copy of Windows 7 is properly installed.

Planning the Installation

As with any OS installation, we must first plan the installation process. When you run the Windows

7 Setup program, you must provide information about how to install and configure the operating

system. Thorough planning can make your installation of Windows 7 more efficient by helping you

to avoid potential problems during installation. An understanding of the configuration options will

also help to ensure that you have properly configured your system.

Here are some of the most important things you should take into consideration when planning for

your Windows 7 installation:

Check System Requirements

Check Hardware and Software Compatibility

Determine Disk Partitioning Options

Complete a Pre-Installation Checklist

Microsoft states the minimum recommended specs for Windows 7:

1 GHz 32-bit or 64-bit processor

1 GB of system memory

16 GB of available disk space

Support for DirectX 9 graphics with 128 MB memory (to enable the Aero theme)

DVD-R/W Drive

Internet access (to activate and get updates)

32-bit or 64-bit Version?

You need to decide whether to install the 32-bit or 64-bit version of Windows 7. The Windows 7

installation disc package includes both 32-bit and 64-bit versions of Windows 7. Basically, the 64-

bit version of Windows handles large amounts of random access memory (RAM) more effectively

than a 32-bit system. So if you plan on using Windows 7 on a computer with more than 3 GB orRAM, I would strongly suggest to use the 64-bit version. Most programs designed for the 32-bit

version of Windows will work on the 64-bit version of Windows, and if they don't, you can always

use Windows XP Mode (read my "How to Install Windows XP Mode on Windows 7" article).

Note: Either way, you cannot use an existing 32-bit version of a previous OS to perform an in-

place upgrade to a 64-bit version of Windows 7, and you'll need to format and install a fresh copy.

Also, you cannot use an existing 64-bit version of a previous OS to perform an in-place upgrade to

a 32-bit version of Windows 7.

Type of Installation
http://www.petri.co.il/installing-windows-xpm-on-windows-7.htmhttp://www.petri.co.il/installing-windows-xpm-on-windows-7.htmhttp://www.petri.co.il/installing-windows-xpm-on-windows-7.htmhttp://www.petri.co.il/installing-windows-xpm-on-windows-7.htm


2/40

Basically, there are 2 approaches to installing Windows 7:

1. Upgrade (In-place upgrade) - This option replaces your current version of Windows with

Windows 7, and keeps your files, settings, and programs in place on your computer.

2. Custom ("fresh" installation) - This option replaces your current version of Windows with

Windows 7, but doesn't preserve your files, settings, and programs. It's sometimes referred

to as a clean installation for that reason.

As always, a fresh installation is much better and I strongly recommend taking that track. Even if

you've got an existing Windows XP/Vista OS on your computer, I would strongly recommend that

you format it and install a fresh copy of the OS.

This article will focus on a fresh installation of Windows 7. Please read my "How to Upgrade from

Windows XP to Windows 7" and "Upgrade from Windows Vista to Windows 7" articles for more

information on those paths.

Beginning the Installation Process

When installing on a physical computer insert your Windows 7 DVD media into your DVD drive and

reboot your computer. If you're asked to press a key to boot from DVD or CD, press any key. A

black window will appear momentarily while the DVD content is read.

Note: These screenshots are taken from a Windows 7 Ultimate installation performed on a virtual

machine running on VMware Workstation. I will be using an .ISO file mounted on the VMs CD/DVD

drive.

Next, a Starting Windows screen will appear.
http://www.petri.co.il/upgrading-windows-xp-professional-sp3-to-windows-7-ultimate-beta.htmhttp://www.petri.co.il/upgrading-windows-xp-professional-sp3-to-windows-7-ultimate-beta.htmhttp://www.petri.co.il/upgrading-windows-xp-professional-sp3-to-windows-7-ultimate-beta.htmhttp://www.petri.co.il/upgrading-windows-xp-professional-sp3-to-windows-7-ultimate-beta.htmhttp://www.petri.co.il/upgrading-windows-vista-ultimate-to-windows-7-ultimate.htmhttp://www.petri.co.il/upgrading-windows-vista-ultimate-to-windows-7-ultimate.htmhttp://www.petri.co.il/upgrading-windows-vista-ultimate-to-windows-7-ultimate.htmhttp://www.petri.co.il/upgrading-windows-vista-ultimate-to-windows-7-ultimate.htmhttp://www.petri.co.il/upgrading-windows-xp-professional-sp3-to-windows-7-ultimate-beta.htmhttp://www.petri.co.il/upgrading-windows-xp-professional-sp3-to-windows-7-ultimate-beta.htm


3/40

Note: If the Windows installation page doesn't appear and you're not asked to press a key to start

from DVD or CD, you might have to specify that your computer uses its DVD or CD drive as the

startup device.

The Installation Process

Like in Windows Vista and Windows Server 2008, and unlike previous versions of Windows,

Windows 7 does not have a noticeable text phase of the setup process, and it will boot directly into

the Graphical User Interface (GUI) mode.

After a few moments you will see the first prompt:


4/40

Click "Next" unless you want to change some regional settings for the installation process. Hebrew

users should read my "Installing Hebrew on Windows 7" article.

Click on the "Install now" button.
http://www.petri.co.il/install-hebrew-on-windows-7.htmhttp://www.petri.co.il/install-hebrew-on-windows-7.htmhttp://www.petri.co.il/install-hebrew-on-windows-7.htmhttp://www.petri.co.il/install-hebrew-on-windows-7.htm


5/40

Note: If you're using the installation media to repair an existing installation of Windows 7 you

should also read my latest article on the Windows Recovery Environment.

Next, accept the license terms and click on "Next".

Next, unless you're upgrading an existing Windows installation, press the Custom (Advanced)

installation type button. Note that in this case, the Upgrade button is disabled because this specific

installation if performed on a new computer without any previous operating system on it.
http://www.petri.co.il/windows-recovery-environment.htmhttp://www.petri.co.il/windows-recovery-environment.htmhttp://www.petri.co.il/windows-recovery-environment.htm


6/40

The next phase is to pick the installation partition. Since this computer has a new hard disk that

hasn't been formatted before, you will only have the option to create a new partition on it.

If you don't want to specify a specific partition to install Windows on, or create partitions on your

hard disk, click Next to begin the installation. If you already have another existing partition with

enough free space and want to install the Windows 7 on that partition to create a multiboot

configuration, select the partition you want to use, and then click Next to begin the installation. If

you want to create, extend, delete, or format a partition, click Drive options (advanced), click the

option you want, and then follow the instructions.

Since I don't need to perform any additional task I will just click on the "Next" button. The

installation process will then create a partition on all the available disk space, and format it.


7/40

The setup process will now begin to copy files from the installation DVD media to the hard disk.


8/40

Process could take a while depending on the type of hardware your computer uses. In my VM test

sample I've used for this demo, the entire process finished before I could finish writing the

previous 3 paragraphs, so it could be pretty quick.

The computer will reboot, and the next thing you'll see is the prompt to set the user's and

computer's name. By default, the computer's name will be username-PC, where username is the

username you've entered.

Note: The user you're creating will be the only user currently available on the system. Like Vista,

the built-in Administrator's account is disabled. Read my article onhow to enable the Windows 7

Administrator's accountarticle for more information.

Click on "Next".

Enter the user's password. Remember this password, as it will be the ONLY user on the system,

and unless you create an additional user or enable the built-in administrator account, if you forget

this password you'll need to crack it to gain access to the system. The best option would be to

choose a complex password made of at least 7 characters or more (something like Pssw0rd or

MYpa$$w0rd). You must also enter a password hint.

Click on "Next".
http://www.petri.co.il/enable-the-windows-7-administrator-account.htmhttp://www.petri.co.il/enable-the-windows-7-administrator-account.htmhttp://www.petri.co.il/enable-the-windows-7-administrator-account.htmhttp://www.petri.co.il/enable-the-windows-7-administrator-account.htmhttp://www.petri.co.il/enable-the-windows-7-administrator-account.htmhttp://www.petri.co.il/enable-the-windows-7-administrator-account.htm


9/40

Next, type in your product key. If you do not have the product key at hand you can still click

"Next", and proceed with the installation. You will be asked to enter the product key after Windows

is installed.


10/40

Choose what sort of protection your computer gets. The recommended settings are best for

someone that doesn't plan to hide their computer behind a corporate firewall (and even then, in

some cases, this would be the best option). If you plan to install a 3rd-party firewall later you can

opt to be prompted later. Note that this setting will also have effect on how the computer uses the

Microsoft Windows Update (Automatic Updates) features.

Download Windows Server 2012 ... 180 Day FREE Trial

Choose your time zone and location and click on "Next".
http://www.petri.co.il/uri/?id=3232&host=www.microsoft.comhttp://www.petri.co.il/uri/?id=3232&host=www.microsoft.comhttp://www.petri.co.il/uri/?id=3362&host=www.microsoft.comhttp://www.petri.co.il/uri/?id=3362&host=www.microsoft.comhttp://www.petri.co.il/uri/?id=3232&host=www.microsoft.comhttp://www.petri.co.il/uri/?id=3232&host=www.microsoft.com


11/40

Select your network location type. This setting can be changed later, but do note that choosing a

profile will have effect on the Windows Firewall and sharing settings. Click on "Next".

Windows will finalize the settings and your desktop will appear.


12/40

This concludes the Windows 7 installation. Next, you would probably want to update your

computer with the latest hotfixes and/or patches from Microsoft.

The Ultimate Guide to Hard DrivePartitioning

Disk partitioning divides the data storage space of a hard disk into separate areas referred to as

'partitions'. Partitions are usually created when the hard disk is first being prepared for usage.

Once a disk is divided into partitions, directories and files may be stored on them. Because of later

changes on the computer and operating system, often an administrator or power user will be faced

with the need to resize partitions, create new partitions in the unallocated space, and sometimes

even undelete partitions that were previously removed or deleted.

Hard disk partitioning tools will allow you to create additional partitions from existing ones by

resizing the existing partitions and creating empty, un-used space on which you can create new

partitions. The most important aspect of such tools is their ability to do this without losing your

data that is currently on your existing partitions. Such tools allow you to create and format these

new partitions.

Hard Drive Partitioning: Use Caution!

Most tools will let you convert a partition from one file type to another, i.e. from NTFS toFAT/FAT32 or vice versa. Needless to say that in most cases, such a conversion, especially from


13/40

NTFS to FAT/FAT32 will cause the files to lose their NTFS permissions (ACLs), and in some cases

where EFS was used to encrypt the files, it will actually cause you to lose access to these files. So

beware!

Some of these tools may be able to help you recover deleted partitions, and if data on that disk

was un-damaged, actually help you gain access to that data. Some, but not all of the tools may

have the ability to move existing partitions from one location on the disk to another location,

again, without losing data.

Note: We've tried to make this guide as definitive as possible, there are always changes in the

software world that we're not aware of. We would gladly accept your feedback, comments and tool

recommendations. Please limit your feedback to freeware utilities.

Disclaimer: The author of this article cannot be held responsible for any data loss or computer

malfunction due to using any of the tools listed in this article. Please carefully read the software

creators read-me files and manuals, and always test before using any tool on a computer or harddisk that holds critical information. Remember as well that free products rarely, if ever, provide

any kind of end user support other than forum or community support. If you're unsure of what

you're doing, or need technical support, it's best to go with a paid product.

10 Free Partition Tools

1 . Ultimate Boot CD

The Ultimate Boot CD is a bootable CD containing tools that allow you to:

Run floppy-based diagnostic tools from CDROM drives. More and more PCs are shipped

without floppy drives these days, and it is such a royal pain when you need to run

diagnostic tools on them.

Free yourself from the slow loading speed of the floppy drive. Even if you do have a

floppy drive, it is still much much faster to run your diagnostic tools from the CDROM

drive, rather than wait for the tool to load from the floppy drive.

Consolidate as many diagnostic tools as possible into one bootable CD.

Run Ultimate Boot CD from your USB memory stick. A script on the CD prepares your

USB memory stick so that it can be used on newer machines that supports booting from

USB devices. You can access the same tools as you would from the CD version.

When you boot up from the CD, a text-based menu will be displayed, and you will be able to select

the tool you want to run. The selected tool actually boots off a virtual floppy disk created in

memory.

UBCD contains a ton of tools including: CPU Tests, Memory Tests, Peripherals Tools, CPU

Information, System Information, Benchmark Tools, BIOS Tools, Hard Disk Installation Tools, Hard

Disk Diagnostic Tools, Hard Disk Device Management Tools, Hard Disk Wiping Tools, Hard Disk

Cloning Tools, Hard Disk Low-Level Editing Tools, Partition Tools, Boot Managers, File Tools, NTFS

Tools, Anti-Virus/Malware Tools, Network Tools, DOS Boot Disks and Linux Boot Disks.


14/40

Getyour copy here

2. GParted Live

The purpose of GParted is to allow the individual to take a hard disk and change the partition

organization therein, while preserving the partition contents. GParted is an industrial-strength

package for creating, destroying, resizing, moving, checking and copying partitions, and the file

systems on them. This is useful for creating space for new operating systems, reorganizing disk

usage, copying data residing on hard disks and mirroring one partition with another (disk

imaging). GParted Live is a small bootable GNU/Linux distribution for x86 machine. It enables you

to use all the features of the latest versions of GParted. GParted Live can be installed on CD, USB,

PXE server, and Hard Disk then run on an x86 machine.

Note: Take care when using GParted on Windows XP/Vista installations. Read here for more

information:

Update to "resize-windows.txt" - Draft to discuss (Page 1) -Documentation - GParted forum

Using GParted to Resize Your Windows Vista PartitionThe How-To Geek

You can also get GParted on various distributions such as the SystemRescueCD, listed below.
http://ubcd.sourceforge.net/http://ubcd.sourceforge.net/http://ubcd.sourceforge.net/http://gparted-forum.surf4.info/viewtopic.php?id=2892http://gparted-forum.surf4.info/viewtopic.php?id=2892http://gparted-forum.surf4.info/viewtopic.php?id=2892http://www.howtogeek.com/howto/windows-vista/using-gparted-to-resize-your-windows-vista-partition/http://www.howtogeek.com/howto/windows-vista/using-gparted-to-resize-your-windows-vista-partition/http://www.petri.co.il/wp-content/uploads/ubcd.gifhttp://www.howtogeek.com/howto/windows-vista/using-gparted-to-resize-your-windows-vista-partition/http://gparted-forum.surf4.info/viewtopic.php?id=2892http://ubcd.sourceforge.net/


15/40

Getyour copy of GParted here

3. System RescueCD

SystemRescueCd is a Linux system on a bootable CD-ROM for repairing your system and

recovering your data after a crash. It aims to provide an easy way to carry out admin tasks on

your computer, such as creating and editing the partitions of the hard disk. It contains a lot ofsystem tools (parted, partimage, fstools, ...) and basic tools (editors, midnight commander,

network tools). It is very easy to use: just boot the CDROM. The kernel supports most of the

important file systems (ext2/ext3/ext4, reiserfs, reiser4, btrfs, xfs, jfs, vfat, ntfs, iso9660), as well

as network filesystems (samba and nfs).

System tools included with SystemRescueCd

GNU Parted creates, resizes, moves, copies partitions, and filesystems (and more).

GParted GUI implementation using the GNU Parted library (see previous post).

Partimage saves / restores partitions to an image file on another partition or to another

system.

FSArchiver flexible tool to save/restore a filesystem to a compressed archive.

File systems tools (for Linux and Windows filesystems): format, resize, and debug an

existing partition of a hard disk

Ntfs3g: enables read/write access to MS Windows NTFS partitions.

sfdisk saves / restores partition table (and more).

Test-disk tool to check and undelete partition, supports reiserfs, ntfs, fat32, ext2/3 and

many others

Memtest+ to test the memory of your computer (first thing to test when you have a

crash or unexpected problems)

Network tools (Samba, NFS, ping, nslookup, ...) to backup your data across the network
http://gparted.sourceforge.net/livecd.phphttp://gparted.sourceforge.net/livecd.phphttp://gparted.sourceforge.net/livecd.phphttp://www.petri.co.il/wp-content/uploads/gparted.gifhttp://gparted.sourceforge.net/livecd.php


16/40

Get yourcopy SystemRescueCD

4. TestDisk

TestDisk is a powerful free data recovery software! It was primarily designed to help recover lost

partitions and/or make non-booting disks bootable again when these symptoms are caused by

faulty software, certain types of viruses or human error (such as accidentally deleting a Partition

Table). Partition table recovery using TestDisk is really easy. TestDisk has features for both

novices and experts. For those who know little or nothing about data recovery techniques,

TestDisk can be used to collect detailed information about a non-booting drive which can then be

sent to a tech for further analysis. Those more familiar with such procedures should find TestDisk

a handy tool in performing onsite recovery.

TestDisk can:

Fix partition table, recover deleted partition Recover FAT32 boot sector from its backup

Rebuild FAT12/FAT16/FAT32 boot sector

Fix FAT tables

Rebuild NTFS boot sector

Recover NTFS boot sector from its backup

Fix MFT using MFT mirror

Locate ext2/ext3 Backup SuperBlock

Undelete files from FAT, NTFS and ext2 filesystem

Copy files from deleted FAT, NTFS and ext2/ext3 partitions.

Get yourcopy of TestDisk here.

5. Ranish Partition Manager

Ranish Partition Manager is a powerful hard disk partitioning tool. It gives users high level of

control for running multiple operating systems, such as Linux, Windows 98/XP, FreeDOS, and

FreeBSD on a single disk. Partition Manager can create, copy, and resize primary and extended

partitions. It includes command line interface and simulation mode that works with large files so

you can safely experiment before working on the real hard drive partition tables.
http://www.sysresccd.org/http://www.sysresccd.org/http://www.sysresccd.org/http://www.cgsecurity.org/wiki/TestDisk_Downloadhttp://www.cgsecurity.org/wiki/TestDisk_Downloadhttp://www.cgsecurity.org/wiki/TestDisk_Downloadhttp://www.cgsecurity.org/wiki/TestDisk_Downloadhttp://www.sysresccd.org/


17/40

Get yourcopy of Ranish here.

6. Partition Logic

Partition Logic is a free hard disk partitioning and data management tool. It can create, delete,

format, defragment, resize, and move partitions and modify their attributes. One cool feature

about it is that it can copy entire hard disks from one to another. Partition Logic is free software,

based on the Visopsys operating system. It boots from a CD or floppy disk and runs as astandalone system, independent of your regular operating system. It is intended to become a free

alternative to such commercial programs.

Its worth noting that the current (as of March 2009) version of Partition logic has the following

limitations:

Does not work with some SATA hard disks, no hardware support for non-USB SCSI hard

disks

Supports only DOS/Windows-style MBR partition tables (used on nearly all IBM PC-

compatibles)

No support for Sun or BSD disk labels, or EFI/GPT tables used on Itanium and Intel Mac

platforms

Most important: Cannot format partitions as NTFS (however, it can resize NTFS)

Cannot resize FAT or EXT filesystems

No hardware support for serial mice or for PCMCIA
http://www.ranish.com/parthttp://www.ranish.com/parthttp://www.ranish.com/parthttp://www.petri.co.il/wp-content/uploads/ranish.gifhttp://www.ranish.com/part


18/40

Get Partition Logichere

7. SwissKnife

SwissKnife allows you to create, delete and format partitions on your hard disk drives in one

smooth, simple process. While the product has been tested up to 400GB, it should support hard

disks of up to 2048GB. SwissKnife allows creation of FAT32 & NTFS partitions. FAT16 option is

provided for compatibility. Supports Internal interfaces such as IDE and SCSI and External

interfaces such as Hi-Speed USB, Parallel port, PCMCIA, USB On-The-Go, Firewire, SATA interfaces

etc. Creates Fixed and Removable Disk Format types. Latest version adds support for NTFS and

features resizable windows. Upon completion, the drive icons will be dynamically updated on your

computer.

Key Features:

Formats faster than the OS (click on chart for details)

Allows change of cluster size during Full format or Quick Format

Divides a single hard drive into one or more partitions

Supports Hi-Speed USB, PCMCIA, SATA, SCSI, USB 1.1, and FireWire external drives

Supports Fixed and Removable disk formats

Supports FAT, FAT32 & NTFS systems

Allows creation of a single partition of up to 2048GB of FAT32 or NTFS file systems.

Full format or Quick Format of existing partitions

Selective partitions can be modified for optimum flexibility
http://partitionlogic.org.uk/http://partitionlogic.org.uk/http://partitionlogic.org.uk/http://www.petri.co.il/wp-content/uploads/partition-logic.gifhttp://partitionlogic.org.uk/


19/40

Get your copy ofSwiss Knife here:

8. Cute Partition Manager (CPM)

Cute Partition Manager is a free advanced hard disk partition management utility that allows youto easily add, edit, delete and manage the partitions in your computer. Cute Partition Manager is

very easy to use, and one of the best features about it is that It lets you preview the changes

before you save them. It lets you edit the boot flag, partition type and other advanced

parameters. It gives you total control of your system during the partition process. For example, it

lets you edit all existing partitions. It even lets you install all the operating systems from scratch.

It supports all versions of Windows (9x,ME,NT,2K,XP,Vista), DOS, Linux, etc.

Some features include:

Lets you create more than 100 partitions per hard disk.

Lets you preview changes before you can save them.

Lets you edit advanced partition parameters such as boot flag, partition type, etc.

Lets you remove every single partition in your system.

Does not require an operating system to run (everything is built-in).

Can be booted from CD, DVD, Blank Floppy, DOS Boot Floppy, etc.
http://www.compuapps.com/download/Swissknife/swissknife.htmhttp://www.compuapps.com/download/Swissknife/swissknife.htmhttp://www.compuapps.com/download/Swissknife/swissknife.htmhttp://www.petri.co.il/wp-content/uploads/swissknife.gifhttp://www.compuapps.com/download/Swissknife/swissknife.htm


20/40

Getyour copy of CPM here.

9. EaseUs Partition Manager

EaseUs Partition Master Home Edition is a FREE disk partitioning utility that offers a powerful range

of functions such as resizing partitions, formatting partitions, copying partitions, creating new

partitions, deleting partitions, hiding partitions, changing drive letters, setting active partitions,

and a handful other functions. Some of the main characteristics of EaseUs Partition Manager are:

Material support for RAID

Re-size and move partitions without losing data

Create and delete partitions with a simple stage

Allocated in a partition to make easier recognition

Format of partitions by simple click

Partition of ownership of every partition

Conceal and to show partitions - to protect important data

Specify a boot partition

Outline of the effects of partitioning of a hard disk before applying

Works on hard disks of 20GB to 800GB
http://www.cutepm.com/http://www.cutepm.com/http://www.cutepm.com/http://www.petri.co.il/wp-content/uploads/cute-partition-manager.gifhttp://www.cutepm.com/


21/40

Note: EaseUs Partition Master Home Edition ONLY supports 32 bit Windows systems. If your

computer is running 64 bit Windows systems, please check the Professional or Server editions

which are not free.

Getyour copy here:.

10. eXtended FDisk

eXtended FDisk, or short XFDisk, is a free DOS FDISK replacement that offers more comfort and

comes with a bootmanager that allows you to have more than one operating system installed on

your hard disk. With XFDisk you can partition your hard disk or install and configure the

bootmanager, which will be located in the first 17 sectors of your first hard disk. The bootmanager

will not occupy an own partition, so you can fully use the four available primary partitions per hard

disk. If you choose to have an extended partition with logical drives on your hard disk, XFDisk

transparently manages the extended partition for you. So you don't need to worry about the size

of the extended partition any more. Of course, XFDisk and the bootmanager support more than

one hard disk and even booting from logical drives.
http://www.partition-tool.com/http://www.partition-tool.com/http://www.partition-tool.com/http://www.petri.co.il/wp-content/uploads/easeus-partition-mamager1.gifhttp://www.partition-tool.com/


22/40


23/40

it wherever you are.

PreparationBefore you start, here are some stuffs that you need to take note of:

1) You need to have a USB drive of at least 3GB space in order to create a Windows 7

bootable USB drive.

2) The process will format and wipe off all your files in the USB drive. Remember to backup

before you proceed.

3) You need to have a Windows 7 installer DVD and an optical drive to read the DVD. If you

have only the ISO file (downloaded directly from Microsoft), you can useVirtual Clone

Driveto mount the ISO in your computer.

InstallationDownloadWinToFlash

Put in your Windows 7 installer DVD and plug in your USB drive.

Unzip the folder to your desktop and run the WinToFlash.exe file

Some of you might see the WinToFlash DLP_NotFound error message. You can safely

ignore this error message.

On the main screen, click on the Window Setup Transfer Wizard. This will bring you to the

wizard mode where it automates (almost) the whole process for you.
http://maketecheasier.com/mount-iso-images-in-windows/2009/05/19http://maketecheasier.com/mount-iso-images-in-windows/2009/05/19http://maketecheasier.com/mount-iso-images-in-windows/2009/05/19http://maketecheasier.com/mount-iso-images-in-windows/2009/05/19http://wintoflash.com/download/en/http://wintoflash.com/download/en/http://wintoflash.com/download/en/http://wintoflash.com/download/en/http://maketecheasier.com/mount-iso-images-in-windows/2009/05/19http://maketecheasier.com/mount-iso-images-in-windows/2009/05/19


24/40

On the next screen, there is an option for you to go into theAdvancedmode and tweak some

of the settings. You can ignore that (if you are not into tweaking) and clickNextto proceed.

Point the Windows file path to the Windows Installer DVD directory.

Point the USB drive to the USB directory.


25/40

ClickNext.

Accept the agreement.

Preparing your USB drive. Make sure you have backup all the important files before you

proceed. This will erase all your data.


26/40

Transferring in progress. This might take a while. Go for your coffee break.

Once you see the following message, the whole process is done. You can now boot Windows

7 from the USB drive.


27/40

Some computers require you to change the bootup setting in the BIOS before you can boot

from USB. Look into your motherboard/computer manual for more instruction.

http://maketecheasier.com/mount-iso-images-in-windows/2009/05/19

http://maketecheasier.com/boot-and-install-windows-7-from-usb-flash-drive/2009/01/23

This guide works 100% for Windows 7 and Windows 8 unlike most of the guidesout there. I have seen many sites/blogs that have Install Vista from USBguide but either with incomplete steps or not working guide. I have also seensome guides that dont use proper commands in this guide. After spendingmany hours I have come up with this 100% working guide to install Windows7

and Windows 8 fromUSB flashdrive.

I just did this method on one of my friends machine andinstalled Windows7and Windows 8 . The main advantage is that by usingUSB driveyou will beable to install Windows 7 or Windows 8 in just 15 minutes. You can also use thisbootable USB drive on friends computer who doesnt have a DVD optical drive.

The method is very simple and you can use without any hassles. Needless tosay that your motherboard should support USB Boot feature to make use of thebootable USB drive.
http://maketecheasier.com/mount-iso-images-in-windows/2009/05/19http://maketecheasier.com/mount-iso-images-in-windows/2009/05/19http://maketecheasier.com/boot-and-install-windows-7-from-usb-flash-drive/2009/01/23http://maketecheasier.com/boot-and-install-windows-7-from-usb-flash-drive/2009/01/23http://www.intowindows.com/how-to-install-windows-7vista-from-usb-drive-detailed-100-working-guide/http://www.intowindows.com/how-to-install-windows-7vista-from-usb-drive-detailed-100-working-guide/http://www.intowindows.com/how-to-install-windows-7vista-from-usb-drive-detailed-100-working-guide/http://www.intowindows.com/how-to-install-windows-7vista-from-usb-drive-detailed-100-working-guide/http://www.intowindows.com/how-to-install-windows-7vista-from-usb-drive-detailed-100-working-guide/http://www.intowindows.com/how-to-install-windows-7vista-from-usb-drive-detailed-100-working-guide/http://www.intowindows.com/how-to-install-windows-7vista-from-usb-drive-detailed-100-working-guide/http://www.intowindows.com/how-to-install-windows-7vista-from-usb-drive-detailed-100-working-guide/http://www.intowindows.com/how-to-install-windows-7vista-from-usb-drive-detailed-100-working-guide/http://www.intowindows.com/how-to-install-windows-7vista-from-usb-drive-detailed-100-working-guide/http://www.intowindows.com/how-to-install-windows-7vista-from-usb-drive-detailed-100-working-guide/http://www.intowindows.com/how-to-install-windows-7vista-from-usb-drive-detailed-100-working-guide/http://www.flickr.com/photos/30447518@N04/3188230874/http://www.flickr.com/photos/30447518@N04/3188230874/http://www.intowindows.com/how-to-install-windows-7vista-from-usb-drive-detailed-100-working-guide/http://www.intowindows.com/how-to-install-windows-7vista-from-usb-drive-detailed-100-working-guide/http://www.intowindows.com/how-to-install-windows-7vista-from-usb-drive-detailed-100-working-guide/http://www.intowindows.com/how-to-install-windows-7vista-from-usb-drive-detailed-100-working-guide/http://maketecheasier.com/boot-and-install-windows-7-from-usb-flash-drive/2009/01/23http://maketecheasier.com/mount-iso-images-in-windows/2009/05/19


28/40

Requirements:

*USB Flash Drive (Minimum 4GB)

*Windows 7 or Windows 8 installation files.

Follow the below steps to create bootable Windows 7/Windows 8 USB driveusing which you can install Windows 7 or Windows 8 easily.Procedure:1. Plug-in your USB flash drive toUSB portand move all the contents from USBdrive to a safe location on your system.2. Open Command Prompt with admin rights. Use any of the below methods toopen Command Prompt with admin rights.*Type cmd in Start menu search box and hit Ctrl+ Shift+ Enter.

Or

*Go to Start menu > All programs > Accessories, right click on CommandPrompt and select Run as administrator.

3. You need to know about the USB drive a little bit. Type in the followingcommands in the command prompt:First type DISKPART and hit enter to see the below message.

Next type LIST DISK command and note down the Disk number (ex: Disk 1) ofyour USB flash drive. In the below screenshot my Flash Drive Disk no is Disk 1.4. Next type all the below commands one by one. Here I assume that your diskdrive no is Disk 1.If you have Disk 2 as your USB flash drive then use Disk2.Refer the above step to confirm it.

So below are the commands you need to type and execute one by one:SELECT DISK 1CLEANCREATE PARTITION PRIMARYSELECT PARTITION 1ACTIVE

FORMAT FS=NTFS(Format process may take few seconds)ASSIGNEXIT

Dont close the command prompt as we need to execute one more command atthe next step. Just minimize it.
http://www.intowindows.com/how-to-install-windows-7vista-from-usb-drive-detailed-100-working-guide/http://www.intowindows.com/how-to-install-windows-7vista-from-usb-drive-detailed-100-working-guide/http://www.intowindows.com/how-to-install-windows-7vista-from-usb-drive-detailed-100-working-guide/http://www.flickr.com/photos/30447518@N04/3188204502/http://www.intowindows.com/how-to-install-windows-7vista-from-usb-drive-detailed-100-working-guide/


29/40

5. Next insert your Windows7/Windows 8 DVD into the optical drive and checkthe drive letter of the DVD drive. In this guide I will assume that your DVD

drive letter is D and USB drive letter is H (open my computer to know aboutit).6. Maximize the minimized Command Prompt in the 4th step.Type thefollowing command now:D: CD BOOT and hit enter.Where D is your DVD drive letter.CD BOOT and hit enter to see the below message.7. Type another command given below to update the USB drive with BOOTMGRcompatible code.BOOTSECT.EXE /NT60 H:

Where H is your USB drive letter. Once you enter the above command you

will see the below message.8. Copy your Windows 7 or Windows 8 DVD contents to the USB flash drive.
http://www.flickr.com/photos/30447518@N04/3188222246/http://www.flickr.com/photos/30447518@N04/3188216154/http://www.flickr.com/photos/30447518@N04/3188222246/http://www.flickr.com/photos/30447518@N04/3188216154/


30/40

9. Your USB drive is ready to boot and install Windows 7 or Windows 8. Onlything you need to change the boot priority at the BIOS to USB from the HDD orCD ROM drive. I wont explain it as its just the matter the changing the bootpriority or enabling the USB boot option in the BIOS.

Note: If you are not able to boot after following this guide means you havent

set the BIOS priority to USB. If you got any problem in following this guide feelfree to ask questions by leaving comment.Update on Jan 11, 2012: If you find this guide difficult to follow, please

use the easy-to-useguide to create a bootable USB to install Windows7 or Windows 8 using official tool.

This guide works 100% for Windows 8 as well. Make sure you follow all stepscorrectly and launch the Command Prompt with admin rights (as given in theguide) to avoid errors. Good luck!

Installing Windows 7 on a

netbookThere are three recommended ways to install Windows 7 on a netbook or other PC that doesn't

have an internal DVD drive:

Purchase and download Windows 7 from the Microsoft Store as an installationfile. When you download Windows 7in this format, you can install Windows 7 on your

netbook just like any other program, with no additional tools or hardware. For more

information about the options available in your country or region, go to theMicrosoft

Storewebsite.

Purchase and download Windows 7 from the Microsoft Store as an ISO file, and copy

it to a USB flash drive. If you need to start, or boot, your PC during Windows 7 installation

(for example, if you want to format your hard disk during installation), you can

download Windows 7 in a special format called an ISO file and use

the Windows 7 USB/DVD Download Tool to create a USB flash drive, which you can then useto install Windows 7 on your netbook.

Use an external DVD drive. If you already have a Windows 7 installation disc, you can

attach an external DVD drive to your netbook to install Windows 7.

Change BIOS Settings
http://www.intowindows.com/how-to-create-bootable-windows-7-usb-to-install-windows-7-from-usb-flash-drive-using-windows-7-dvdusb-tool/http://www.intowindows.com/how-to-create-bootable-windows-7-usb-to-install-windows-7-from-usb-flash-drive-using-windows-7-dvdusb-tool/http://www.intowindows.com/how-to-create-bootable-windows-7-usb-to-install-windows-7-from-usb-flash-drive-using-windows-7-dvdusb-tool/http://www.intowindows.com/how-to-create-bootable-windows-7-usb-to-install-windows-7-from-usb-flash-drive-using-windows-7-dvdusb-tool/http://go.microsoft.com/fwlink/?LinkId=160999http://go.microsoft.com/fwlink/?LinkId=160999http://go.microsoft.com/fwlink/?LinkId=160999http://go.microsoft.com/fwlink/?LinkId=160999http://go.microsoft.com/fwlink/?LinkId=160999http://www.intowindows.com/how-to-create-bootable-windows-7-usb-to-install-windows-7-from-usb-flash-drive-using-windows-7-dvdusb-tool/http://www.intowindows.com/how-to-create-bootable-windows-7-usb-to-install-windows-7-from-usb-flash-drive-using-windows-7-dvdusb-tool/


31/40

Optimize Your BIOS for Top Performance

By now you know that there are tons of things you can do to make your Windows PC run

faster and smoother and Im sure your computer is now a lot more comfortable to use. Butnow is the time to speed up your computer even more by delving under the hood and

tweaking some more advanced settings.

One of the more advanced optimization techniques is BIOS tuneup. BIOS stands for Basic

Input-Output System and is the standard firmware for motherboards. It is the first software

your computer loads when you power it up. It prepares everything for your operating system

by detecting your computers hardware components and letting the operating system know it

can use them, calculating the amount of available RAM and setting the CPU speed. Once

everything has been taken care of, the BIOS boots the operating system and lets the OS take

it over.

Just like any other piece of software, the BIOS can be fine-tuned. Optimizing the BIOS will

decrease your computers boot time and make it run more efficiently.

Access the BIOS

On most systems, accessing the BIOS is not all that hard. When you power up your

computer, a startup screen appears. That screen is usually accessible for only a few seconds,

so youll need to act quickly. On the screen, you should see which key you need to press to

enter Setup. Usually its eitherDel, F1, F2 or F12. Make sure you press the appropriate key

quickly, as you might not have more than a few seconds. This will get you through to the

BIOS settings.

If the startup screen flashes too quickly or doesnt appear at all, try pressing the above-

mentioned keys you will eventually catch the right one. And if there is a splash screen that

doesnt show anything, try pressing Esc this should get you through to the DOS screen

where you enter BIOS setup.


32/40

Configure boot order

Configuring boot order is something that can significantly speed up computer startup. The

BIOS manages the order of system boot items, such as floppy (yes, they still exist), CD/DVDoptical drive, flash drive and hard drive. At times, you might need to boot from a CD or a

flash drive, but most of the time you boot from your hard drive. However, your BIOS checks

whether there are any bootable CDs or floppies, just in case. When it doesnt detect any of

these devices, it moves on to the hard drive. Since you use the hard drive to boot your OS

every time you turn your computer on and almost never use bootable CDs or other drives, it

only makes sense to put your hard drive first in line. This will save you a few seconds during

computer startup. Here is how you can do it:

1. Access the BIOS by pressing the correct key for your system

2. Look for the Boot entry and navigate to the submenu

3. Find an entry that says Boot Sequence or Boot Priority Order or Boot Device

Priority (or something of the like). Press Enter if required.

4. Then find your hard drive on the list. It could be called something like IDE0. If its nr.

1, then thats great and you dont need to configure anything. If its not, then youll need to

make it nr. 1 by either assigning the number to it or moving it up the list. Just follow the on-

screen instructions.


33/40

5. When youre done, press F10 to save the changes and exit.

6. Reboot your computer for the changes to take effect.

It also makes sense to disable floppy altogether because its highly unlikely that you will be

booting from there (even if you have a floppy drive, that is). To disable FloppyDrive in BIOS,youll need to click onFloppyDrive A within BIOS and set it toDisabled.

Save the changes in BIOS and your computer wont look for floppy drives anymore. You can

do the same for your CD drive and re-enable it or move it to the top later on in case you

need to boot from your Windows disc.


34/40

Enable the Quick Boot option

In the past, computers needed to run POSTs power-on self tests, which are no longernecessary. However, some systems still perform them and thus increase your PCs startup

time. Memory check is the longest of them all and can last for several seconds. The Quick

Boot option still performs all the necessary tests, but it does that quicker. This makes sense,

because the complete version of POSTs is not really needed every time you power up your

PC.

Turning on Quick Boot is pretty easy:

1. Press the appropriate key to enter your BIOS

2. When youre in, find an item that refers to Quick Boot, Fast Boot or Memory

Check. Use the arrow keys to highlight it

3. Follow the on-screen instructions to either enable Quick Boot or disable Memory

Check

4. Press Esc to exit the BIOS and dont forget to save all changes

5. Reboot your computer for the changes to take effect.

Update your BIOS

Just like any other software, BIOS needs updating. And just like any other vendor, your

motherboard manufacturer should issue regular updates and bug fixes, as well as improve

compatibility with new devices. BIOS updates can significantly decrease your PCs boot time

and increase its overall performance.

BIOS updates are available for download through your PC/motherboards manufacturer

website. But before downloading youll need to find out which BIOS version your computer is

running. To do that, simply type msinfo32 in the Search boxin Windows 7/Vista, or in

the Run box in Windows XP and hit Enter.


35/40

This will open the System Information tool where you will be able to see which BIOS

version you are using (look for it under System Summary). Record your BIOS version and

close System Information.

Now that you know your BIOS version, go to your PCs manufacturers website and check

whether there is an update available. Most manufacturers sort updates by PC lines and

models.


36/40

Be very careful and make sure that you download the right BIOS update file that is intended

for your particular model. Installing a BIOS that is not intended for your model will most

likely wreck your computer and make it unbootable. Most BIOS updates will warn you if you

try to install them on hardware that doesnt match, but its best to be careful in the first

place.

Once youve found the right BIOS update, download it along with any supporting

documentation and Read Me files.

IMPORTANT: its absolutely essential to read the update instructions in theRead

Medocumentation. Updating the BIOS incorrectly can ruin your computer.

http://wintoflash.com/download/en/

Good Netbook - NO drivers CD includedAs always Flipkart service was excellent. They delivered this laptop in 2 days. Thank youFlipkart.

Built Quality:

Built Quality of this netbook is very good. If you carry this netbook in hand it will not look cheapor make any squeeze sounds. It looks very professional in black color.
http://wintoflash.com/download/en/http://wintoflash.com/download/en/http://wintoflash.com/download/en/


37/40

No Drivers Included:HP did included CDROM with this laptop however it only contains acceptable user policy and donot contains any drivers!. If you choose to install windows then you have to download all driversfrom HP support web site which may take you few hours. Windows 7 Professional / Home Basicetc, 32 bit OS works very well on this laptop and you will not feel any speed lags if you are usingit for browsing, watching movie, listening Music, MS Office work. It does it all and it does it well.

Speakers:Speakers in this laptop are of good quality and they sound better then my 12-inch dell laptop.Don't expect too much sound from speaker because its 10-inch laptop, however you will still beable to enjoy music.

Keyboard and touch pad:Keyboard and touch pad are very well built and you will not have any problem in typing or usingtouch pad as mouse.

Battery:I have not yet tested battery fully but it can definitely go beyond 5-6 hours for normal usage. Ithowever takes about 2 hours to get fully charged from 10% charge.

Wifi and USB:Wifi and usb are working just fine. If you are installing windows 7 then you need to install"Atheros 2011 Wireless LAN Driver" for wifi. I am telling you to save your time.

Display:It has MATT display which means screen is not shiny. This was the primary reason I bought thislaptop. Matt displays are much better from glossy displays because they do not have anyreflection and you can see better in bright light.

Display of this laptop is very nice and you can easily view 720p HD videos on it. Screenbrightness is very good and properly visible even in bright sunlight.

It can also drive external monitor and you can even extend your desktop on second monitor. Itmeans you can work on external monitor through this laptop. I tested my external monitor whichhas 1650x1050 resolution and it was able to drive it properly. I also tried playing some you tubevideos on external monitors and they work fine, however there was some lag on externalmonitor (not primary display) while playing youtube videos in FULL screen mode. I think this isfair considering processing power of this laptop.

It also means you can watch some video in low settings on your external tv through pc

connectivity. However, don't expect much.

Installation:HP did not include any windows or linux drivers on CD supplied with this laptop. Only Windows 7drivers are available for download from HP Support web site.

You can only install Windows 7 x86 (32-bit) version on this laptop as atom processor is 32-bitprocessor. If you get cd/dvd driver not found error during installation from USB stick make sureto change drive boot options in bios and make CD boot option as 1st, following by USB and thenfinally HDD.

I also recommend buying avira internet security suit to ovoid virus related problems. It alsocomes with built in firewall to protect cyber attacks and you can restrict your child from browsingun safe content. Please buy genuine software to ovoid problems in long run and support


38/40

software developers.

Conclusion:If you want netbook and this is your budget, go for it. Remember this laptop do not comes withwindows operating system. Dos included with this laptop if of no use. If you are not a tech savyperson and don't own windows license then go for other version of this laptop which comes withwindows 7 pre-installed.

Finally, I am giving this laptop 4 stars because HP did not include any drivers with this laptopresulting in waste of time downloading them. Also, I am geek and own many laptops. I havenamed this laptop chotu because its the smallest in my collection.

If you find this review useful then please do select yes.

awesome and cheapLets face it no one buys Acer!!!!

Asus is fine but has only one gb ram in this price range.To load windows 7 ultimate one needs 2 gb ram(works like a charm on this one).10 inch led is perfect for travel.10 times better than buying tablets at way higher price.Internet speed processing speed awesome(upto 5 applications)(second gen dual core atomN2600 with two cores is enabled with hyperthreading making it look like four cores)And man oh man....awesome battery life!!!!!!!!! you are in for a treat with this one... 9 hrsstraight..good for developers too....Netbeans, Eclipse etc loads up in secondspc Boots up in seconds.just get this product. you wont regret it!

Best at its Price..The Best Netbook at this price... Bcoz it stays alive for 9 hrs, and decent looks, The Bestr in itsclass... PaisaVasool....................................................................................................................... ......

Excellent Netbook. Search no more. Go for it.SHIPPING:Ordered it on Friday evening. Received it on Monday morning.It came with a really nice package. I think some accidental drop can even do no harm on aNetbook packed that well. So 5 star for shipping.

PERFORMANCE:

And talking about the netbook, it's awesome. You can easily watch 720p mkv videos even inpower saver mode. Battery backup is really awesome. It really lasts more than 7 hrs. Even if youare watching movies. And while using only internet,with low brightness settings it lasts morethan 9 hrs. When i was playing hearts on 85% battery, it showed 10 hrs and 20 minutes left. Italso charges fully in two hours. It can take longer if you are working heavily on it. Batterybackup is one of the main thing why i bought this netbook.

PREJUDICES:I thought before buying this netbook that this is after all a netbook and this is gonna getoverheated and will not be able to run many programs simultaneously, it'll freeze many times, i'llnot be able to play high quality 720p mkv videos blah blah.... But surprisingly i'm not facing anyof this issues. And so far i haven't found any leggings. Processor is powerful enough to do

things. Haven't tried to install and play any games though. I'll definitely try some.


39/40

OPERATING SYSTEM RELATED ISSUES:I tried Linux mint, joli cloud and windows 7 starter. All works great. Use linux mint if you don'twant to buy windows 7 starter(Rs 2500+) or don't wanna install a pirated one. Joli cloud issomewhat in capable when it comes to playing 720p. But on linux mint, you want get any issues.I reckon you'll get no trouble in Ubuntu also. But install linux mint if you don't want to wastetime on downloading codecs and essential softwares. But the wireless is not working in linux.You can not even find them in additional drivers tool. They need atheros drivers i guess. I thinkswireless module can work in linux by some effort. Same goes for brightness settings. No changein brightness without right drivers.

QUALITY:Build Quality is very good.Sound quality is average. LCD screen is excellent. First i found screensize small but after some days(3-4) i'm now used to it. And now i find my friends laptop(14.1inches) very big. I couldn't believe that i was using that big screen 3 weeks ago. It also has anti-reflective feature. So you can even enjoy it even in bright sunlight. Keyboard is also good. Youcan easily get used to it. Maybe you'll find touchpad small if you're not used to fast pointer speedand no pointer precision.But it has that pinch and zoom, two finger scrolling, 3 finger tap,

sensitivity etc etc kinda thing.

Overall this netbook is excellent. Battery backup is amazing. Quality is very good. If you travel alot like me,then this is the perfect companion for you.Ultra portable. Go for it.

Was this review helpful?Yes/No

2 of4 users found this review helpful.

Permalink Report Abuse

Vaibhav Ashar

30 October 12

Good Light Weighted CompanionHiOn Flipkart Delivery Service is Excellent. I'm using this since 9 Long months. Its Good, batterybackup is also acceptable. I installed Windows 7 on it. Good Response Time. I'm not playingmuch game on it. Its NetBook. Using much for internet and Programming & ManagementResearch. Have satisfactory performance.

The only bug till date is, after constant use of long hours some simple shortcut keys such as"show desktop" and the "Desktop icons" become un clickable. But I manage it using WindowsExplorer.

If you want to use it as NetBook go for it. Excellent choice !!

RE: Planning to install Windows 7 on your netbook, here's a coupletips

I installed Win7-Enterprise on a Packard-Bell Dot running

atom Atheros with 1gb ram.

I didnt' install from a USB key but rather got a portable

external dvd drive. Install went very smooth, and the netbook

now runs MUCH better than it did on XP.
http://www.flipkart.com/reviews/RV2GYBWNAM88NLAU5http://www.flipkart.com/reviews/RV2GYBWNAM88NLAU5http://www.flipkart.com/user-profiles/vaibhav.ashar-6687http://www.flipkart.com/user-profiles/vaibhav.ashar-6687http://www.flipkart.com/user-profiles/vaibhav.ashar-6687http://www.flipkart.com/reviews/RV2GYBWNAM88NLAU5


40/40

Can I install Windows 7 on my HP Laptop with DOSpreviously installed? What steps I have to follow?

Actually I bought HP Notebook model G62- b55se, having DOS operating system, Now I want to

install Windows 7 on it, How to proceed installation.Please guide me

2 years ago Report Abuse

Uziel Tech ExpertBest Answer- Chosen by Asker

A Windows 7 clean install simply means an installation of Windows 7 on an unused partition on

your hard drive. In most cases, though, a clean install of Windows 7 means to remove an existing

operating system which is DOS in your case.

I hope you have the Win& DVD media and the Key. To begin the Windows 7 clean install

process, you'll need to boot from the Windows 7 DVD. Put the dvd in the dvd drive and restartand immediately start pressing F12 (else change the boot order to boot first from the DVD in

BIOS by pressing F2) ....Watch for a Press any key to boot from CD or DVD... message...press

nay key immediately... now just wait and follow on screen instructions. Go for the

Custom(advance Option)...Windows 7 setup considers partition management as an advanced

task so you'll need to click the Drive options (advanced) link to make those options available

Now that all available drive options are listed, you can delete any operating system related

partitions from your existing hard drive (DOS in this case) ....Highlight the partition you want to

delete and then click the Delete link ..... As you can now see, all the space on the installed hard

drive is unallocated. No partitions exist on this computer. If you're installing Windows 7 on a

computer with a single hard drive on which you've just deleted all the partitions from, your screen

should look like the one above, aside from your hard drive being a different size.

Now keep following the prompts and you will be able to install windows.

2 years ago
http://answers.yahoo.com/question/report;_ylt=AsH8.PC0yAmjoAox7_5v7bNs7hR.;_ylv=3?qid=20110318041237AAgfBEn&kid=BaVdIWn7KUNaQthGYAJp&date=2011-03-18+04%3A12%3A37&.crumb=LojeqTIA844&s=qhttp://answers.yahoo.com/question/report;_ylt=AsH8.PC0yAmjoAox7_5v7bNs7hR.;_ylv=3?qid=20110318041237AAgfBEn&kid=BaVdIWn7KUNaQthGYAJp&date=2011-03-18+04%3A12%3A37&.crumb=LojeqTIA844&s=qhttp://answers.yahoo.com/my/profile;_ylt=Avlr8c9yUlG3fnhAqaK51FJs7hR.;_ylv=3?show=7q7dLfdCaahttp://answers.yahoo.com/my/profile;_ylt=Avlr8c9yUlG3fnhAqaK51FJs7hR.;_ylv=3?show=7q7dLfdCaahttp://answers.yahoo.com/my/profile;_ylt=Aiyumv5lTX04pRh8KKilscVs7hR.;_ylv=3?show=7q7dLfdCaahttp://answers.yahoo.com/my/profile;_ylt=Avlr8c9yUlG3fnhAqaK51FJs7hR.;_ylv=3?show=7q7dLfdCaahttp://answers.yahoo.com/question/report;_ylt=AsH8.PC0yAmjoAox7_5v7bNs7hR.;_ylv=3?qid=20110318041237AAgfBEn&kid=BaVdIWn7KUNaQthGYAJp&date=2011-03-18+04%3A12%3A37&.crumb=LojeqTIA844&s=q

ht install windows 7-27p

Documents