NEXT PAGE

Grain & Feed Milling Technology is published six times a year by Perendale Publishers Ltd of the United Kingdom.All data is published in good faith, based on information received, and while every care is taken to prevent inaccuracies, the publishers accept no liability for any errors or omissions or for the consequences of action taken on the basis of information published. ©Copyright 2010 Perendale Publishers Ltd. All rights reserved. No part of this publication may be reproduced in any form or by any means without prior permission of the copyright owner. Printed by Perendale Publishers Ltd. ISSN: 1466-3872

Digital Re-print - March | April 2011 HTST and the Feed Expander

www.gfmt.co.uk

NEXT PAGEPREVIOUS PAGE

GFMT11.02.indd 61 30/03/2011 15:56

When you think Sorting, think Satake.

GFMT11.02.indd 2 30/03/2011 15:53

PREVIOUS PAGEwww.gfmt.co.uk

LINKS• Seethefullissue• VisittheGFMTwebsite

• ContacttheGFMTTeam

• SubscribetoGFMT

ThisdigitalRe-printispartoftheMarch|April2011editionofGrain&FeedMillingTechnologymagazine.Contentfromthemagazineisavailabletoviewfree-of-charge,bothasafullonlinemagazineonourwebsite,andasanarchiveofindividualfeaturesonthedocstocwebsite.Pleaseclickheretoviewourotherpublicationsonwww.docstoc.com.

Topurchaseapapercopyofthemagazine,ortosubscribetothepapereditionpleasecontactourCirculationandSubscriptionsManageronthelinkadove.

INFORMATIONFORADVERTISERS-CLICKHERE

Article reprintsAll Grain & Feed Milling Tecchnology feature articles can be re-printed as a 4 or 8 page booklets (these have been used as point of sale materials, promotional materials for shows and exhibitions etc).

If you are interested in getting this article re-printed please contact the GFMT team for more information on - Tel: +44 1242 267707 - Email: jamest@gfmt.co.uk or visit www.gfmt.co.uk/reprints