Segmental Retaining Walls

FrogStone™

IMPROVINGYOUR

LANDSCAPE™

www.pavestone.com

FrogStone™

Typical Geosynthetic Reinforced Cross Section

APPLICATIONSTerraced Gardens • Landscape Retaining WallsGeosynthetic Reinforced Tall Walls • Erosion Control

PRODUCT INFORMATION

Frogstone Straight Face16" L x 12 "W x 6" H*Wt./Stone: 49 lbs.Stones/Pallet: 40Approx. Wt./Pallet: 2,460 lbs.Face Ft./Pallet: 26Product Number: 848

Frogstone Corner16" L x 8" W x 6" H*Wt./Stone: 46 lbs.Stones/Pallet: 64Approx. Wt./Pallet: 2,978 lbs.Product Number: 828C

Frogstone Five Way16" L x 12 "W x 6" H*Wt./Stone: 49 lbs.Stones/Pallet: 40Approx. Wt./Pallet: 2,460 lbs.Face Ft./Pallet: 26Product Number: 847

Caps not available in all markets.* Fractional dimensions are nominal.

Designed for beauty, FrogStone™ units are textured with a random split face resembling weathered rock. Unit shapes and sizes are balanced to providea natural profile which compliments any design or construction. FrogStone™ is the perfect choice for architects, designers and landscapers who want tomatch their retaining walls to the textures and colors of a projects natural surroundings.

© 2007 by Pavestone Co. All Rights Reserved. and Improving YourLandscape™, are trademarks of the Pavestone Co. Frogstone™ trademark andCornerStone® is a registered trademark of CornerStone Wall Solutions, Inc. Patents Pending.

ICPI Charter Member CornerStone® Wall SolutionsMember of ASLA and NCMA

Pavestone Cap #81918 L x 13 1/2 W x 3" HWt./Stone 34 lbs.Stones/Pallet 48Approx. Wt./Pallet 3,060 lbs.Linear ft./Pallet 72Product Number 819

COMPOSITION AND MANUFACTUREFrogStone™ is made from a “no slump” concrete mix. Made under extreme pressure and highfrequency vibrations.

INSTALLATION FOR REINFORCED WALLS1. ExcavateDig a base trench 24 inches to 36 inches wide and a minimum of 12 inches deep. Remove allvegetation and unsuitable organic soils. ( Do not use these for structural backfill. ) Compact soil baseproperly.

2. Prepare Leveling PadFill trench 6 inches of well graded aggregate and compact firmly with vibrating compaction equipment.

3. Level the BaseLevel the aggregate base from front to back and side to side. This procedure will ensure a straight andstable wall.

4. Laying Your First CourseUse a string line to align the first row of units. For smooth curves, use a flexpipe as the guide. Place eachunit edge to edge, lining up the back of the units

5. Build Your WallSweep the top of each course of units to clear debris. Half-stagger the next course so each unit iscentered on two units below. Pull each unit forward to lock connecting lugs in place.

6. Install BackfillPlace perforated drainage pipe behind the base of the wall. Add 12 inches of free-draining aggregatebehind the wall. Fill the hollow core of the units with the same materials. Place the backfill materials inlayers of no more than 12 inches deep. Compact each layer well, making sure to keep the compactionequipment 12 inches away from the back of the wall.

7. Reinforce WallsPlace the geosynthetic according to the engineer's plan drawings and specifications. Place thegeosynthetic on top and as close to the front of the units as possible. Lock the next course of units intoplace. Gently tension the geosynthetics toward the back of the compacted backfill. Repeat thebackfilling steps. Always work from the back of the wall toward the end of the reinforced zone.

8. Cap Your WallSweep off the top course of units. Secure caps to the top of the wall using an approved concreteadhesive. Use a level piece of string to properly align the capping. Place filter soil seperation fabric ontop of the backfill and drainage materials as well as the back side of the wall. Cover with top soil.

STEP 1Excavate

STEP 2Preparing Level Pad

STEP 3Level the Base

STEP 4Lay your First Course

STEP 5Build your Wall

STEP 6Install Backfill

STEP 7Reinforce Wall

STEP 8Cap your Wall

Installation Illustrations Steps 1-8

Complete installation & specification details are available by contacting your Pavestone Sales Representative.Note: Colors are shown as accurately as possible in brochures & samples, but due to the nature of the product,regional color differences and variables in print reproduction, colors may not match exactly.

Typical Gravity Cross Section

• Atlanta, GA: (770) 306-9691• Austin/San Antonio, TX: (512) 558-7283• Boston, MA: (508) 947-6001• Cartersville, GA: (770) 607-3345• Charlotte, NC: (704) 588-4747• Cincinnati, OH: (513) 474-3783• Colorado Springs, CO: (719) 322-0101• Dallas/Ft. Worth, TX: (817) 481-5802• Denver, CO: (303) 287-3700

• Hagerstown, MD: (240) 420-3780• Houston, TX: (281) 391-7283• Kansas City, MO: (816) 524-9900• Las Vegas, NV: (702) 221-2700• New Orleans, LA: (985) 882-9111• Phoenix, AZ: (602) 257-4588• Winters, CA: (530) 795-4400• St. Louis/Cape Girardeau, MO: (573) 332-8312

SKU#CDC24411/07