22 hrs

1 pcs

f

0.15 mm

k

0.40 mm

h

PLA

115 g

d

MK3/S

Summary

Left and right hemispheres of the brain of Rajat Jain (25) obtained with anMRI scan and used in UCSF's and UCSD's glassbrain project. I got the 3dfiles from the National Institutes of Health 3D Print Exchange web site.

There are two STL files, which came from these respective URLs: Left Side: https://3dprint.nih.gov/discover/3DPX-000757 Right Side: https://3dprint.nih.gov/discover/3DPX-000758

World & scans > People

brain

The GCODE prints both hemispheres at the same time. Note that themodel contains internal brain structures that cannot be seen on the print,so I chose to use the PrusaSlicer Support All option to fill any internalvoids.

The two sides fit together nicely, as you can see in one of the photos.

Randy

Human BrainHemispheres fromMRI data

VIEW IN BROWSER

updated 23. 9. 2019 | published 23. 9. 2019

Print Files (.gcode) DOWNLOAD ALL FILES

77.6 MB

21.68 hrs f 0.15 mm k 0.40 mm h PLA 114.70 g d MK3/S

updated 23. 9. 2019

Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES

13.3 MBupdated 23. 9. 2019

13.4 MBupdated 23. 9. 2019

Find source .stl files on Thingiverse.com

License

This work is licensed under a Creative Commons (4.0 International License)

Attribution-NonCommercial

✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✖ | Commercial Use ✖ | Free Cultural Works ✖ | Meets Open Definition

brain_both_hemispheres_015mm_pla_mk3s_21h41m.gcode

brain-left-hemisphere.stl

brain-right-hemisphere.stl