hx9500 sdh/sonet & pdh modular multiplexer (en) · sncp-64k over pdh in sdh hx9500r the right...

Mult i -Ser vice Access Network

The HX9500 SONET/SDH-PDH is a

Hybrid Multi-Service Access Multi-

plexer with STM-1/4 - OC-3/12 optical

lines aggregate and HS tributaries and

a non-blocking VC11/VC12/VC3/VC4

cross-connect together with a PDH

DS0 cross-connect or DACS with Low

Speed tributary modules.

The 6U shelf delivers:

- 4 High Speed tributary module slots

- 6 Low Speed tributary module slots

With up to 4 aggregate optical STM-

1/4 - OC-3/12 or electrical STM-1/OC-

3 line interfaces, the HX9500 SONET/

SDH offers service providers a versa-

tile protection scheme including

UPSR/SNCP and MSP(1+1) protection

for both ring and linear network topolo-

gies. It can operate with the HX9100

and HX9400 multiplexers in the same

topology.

The HS tributary modules include opti-

cal STM-1/4 - OC-3/12, E3/T3, E1/T1

interfaces and Fast Ethernet over

STM-1/4 - OC-3/12. Fast Ethernet sig-

nals are mapped into the SONET - SDH

payload through standard techniques

such as GFP, LAPS, VCAT and LCAS.

These HS modules are the same mod-

els for the HX9400 SONET-SDH multi-

plexer.

Vers ion 1 .3 – August 2012

Features

◦ Combined SONET - SDH ADM

and E1/T1- PDH multiservice

DACS

◦ 6U height, full front access

(ETSI) shelf

◦ TM, ADM and DCS at DS0,

VC12, VC3, VC4

◦ Dual STM-1/4 - OC-3/12

Optical Ring Uplinks

◦ Hot-swappable cross-connect

modules, tributary modules

and power modules.

◦ Tributary Modules (See Ta-

ble1 below) ◦ High-Speed or High Density

access tributary modules HS

◦ Low-Speed access tributary

modules (LS)

◦ Power Modules ◦ DC (-48Vdc)

◦ *AC (90 to 240V, 50/60Hz)

◦ Dual Power (1+1) Protection

◦ Networking protection

◦ Tributary protection ◦ E1/T1: Card, Port, Line

◦ E3/T3: Card, Port, Line

◦ B155/622: MSP, SNCP

◦ Cross-connect Unit (XCU)

◦ SDH Protection MSP, SNCP

◦ PDH Protection 1+1 and w

3E1 card SNCP PDH 64K

◦ TM, ADM, and cross-connect

◦ Full cross-connect at

VC11/VC12/VC3/VC4 levels

◦ External/Internal/Line timing

source with SSM

◦ Ethernet supports GFP, LAPS,

VCAT and LCAS

◦ Full switch Ethernet capabil-

ity on EoS card

◦ DTMF Engineering Order-Wire

using VoIP phone

◦ Alarm suppression, masking

and report

◦ Management ◦ Console port, VT100 menu

◦ SNMP Port

◦ Telnet

◦ Centralized management

EMS-GUI CXRview

◦ CXR’s EMS/iNMS EMS TMN

management,full FCAPS end-

to end circuit management

◦ SSH

HX9500 HX9500 HX9500 HHHYBRIDYBRIDYBRID SONET/SDHSONET/SDHSONET/SDH---PDHPDHPDH

DESCRIPTION

The LS tributary modules are connected

through a full non-blocking DS0 cross-

connect matrix so delivering an inte-

grated mini DACS system.

All interfaces are fully compliant with the

relevant ITU ETSI and ANSI standards.

The hybrid SONET/SDH-PDH provides full

Operation, Administration, Maintenance

and Provisioning (OAM&P) functionalities.

Users can easily operate the HX9500R

locally or remotely for centralized man-

agement together with HX9400R,

QX3440/S/D and different product of

CXR ranges with CXRview-Plus (EMS) and

CXR-iNMS (integrated NMS).

- Multi -Service Access Network Vers ion 1 .3 – August 2012

THE HX9500 R

CXR Web site

www.cxr.com

Specifications may change without notice.

Smart Solutions

for Smart Networks

4 SDH slots

Fans Connector b.dPower

6 PDH slots

The HX9500R structure with two CPU/Aggregate HX9400R-CC5 give it the possibility to deploy

different topologies of SDH aggregates and tributaries. This configuration support 2 SNCP ring

STM1/4 or 2 MSP 1+1 or one SNCP + MSP (1+1) STM1/4 ring with 4 fibers or 4 independent

STM1/4 .

Each interface STM1 or STM4 are independent and can be selected by the selection of optical

module or the settling for multi-rate SFP module.

SDH TOPOPLOGIE OF THE HX9500R


PDH SDH

COREEDGE ACCESS

EoPDH L2: RSTP L3: Static, RIP, OSPF

EoSDH E-LINE: SNCP LCASE-LAN: RSTP

SNCPMSP 1+1

SNCP+MSP

SNCPMSP 1+1

SNCP MESHSNCP+MSP

1+1SNCP-64K over PDH SNCP-64K over PDH in SDH

HX9500R THE RIGHT PROTECTION FOR PDH and SDH

QX3440QX3440S

HX9400RHX9416R

HX9500R


CXR Web site

www.cxr.com

Specifications may change without notice.

Smart Solutions

for Smart Networks

894 Faulstich Court

San Jose—CA95112—USA

Phone +1 ( 408 ) 573-2700

Email : [email protected]

Please contact for North America

Rue de l ’ Ornette

28410 Abondant – France

Tel. +33 (0 ) 2 37 62 87 90

Email: [email protected]

and for Europe, Africa

and other countries

SPECIFICATIONS

Physical/Electrical

Clock Source Up to 4 clocks with priority from : Internal, STM-N Line 4 aggregate, 2 External input 2MHz or G704 w or w/o SSM, E1 PDH source, 2 output clocks Management Interface

Alarm Input/Output

Standards Compliance

Certification EMC: FCC Part 15 Subpart B, Class A; EN 55022, Class A; EN55024; EN300 386 * In test for DC48v only: IEC61850-3, IEEE1613 for utilization in electric substation

HX9500R-6U 6U chassis 433mm x 264mm x 223,5mm (W/H/D) HX9x00R-FILTER 0,5U chassis 433mm x 22mm x 223,5mm (W/H/D) HX9x00R-FILTER-CBL-T 2U chassis 433mm x 88mm x 223,5mm (W/H/D) AC Power 90 to 240 VAC, 50/60Hz *

DC 48v Power -36 to –72 Vdc ± 15%

DC 24v Power By use of DC 48v card and a 1U 19” chassis with dual chan-nel converter 24V to 48V the DCDC-2X24-48-300W-1U DC 17 to 31 V to DC 48 V 300W each channel

Temperature -5 to +55°C

Humidity 0-95%RH (non-condensing)

Mounting Desk-top stackable, 19/23 inch rack mountable supply with brackets, and wall mountable

EOW 2 * RJ-11 FXS, for Analog Circuit Telephone Device (Tip/Ring) , including SIPv2 technology

LAN port 2* RJ-45 , Lan ports for SNMP administration, 100BT Console port DB-9F E1/T1 interface connector SCSI-II 68 pins Optical Interface connector SFP module with LC connectors

Number of Optical STM-x Up to 6 STM4 or 10 STM1 Number of E1/T1 channels Card of 16E1/T1, 32 E1/T1 or 63 E1/ 63T1

Console port DB9F, RS232 DCE, user interface VT100 menu driven Standard SNMP V1 and V3 (RFC1213, RFC2571 to RFC2575) OSS interface 10/100BaseT FE (IEEE 802.3u ), Telnet and SSH V2 NE/NE interface DCC/HDLC/Ethernet type II

Inputs Ports 4 Activation current 3 mA Internal resistance 1K Deactivation current 1.5 mA Connectors RJ45 Outputs

Ports 4 Maximum switching voltage 110 Vdc, 125 Vac Initial insul. resist. Min. 100M ohm (at 500Vdc) Connectors RJ45 Use SNMP TRAP or Transmission from Input to Output

ITU-T G.703, G.707, G.751, G.747, G.7041, G.7042, G.775, G.783, G.806, G.813, G.823, G.824, G.826, G.841, G.747, X.86, G.664

ANSI T1.105, T1.107

IEEE 802.1q & 802.1ad(VLAN), 802.1w(RSTP), 802.1s(MSTP), 802.3x(flow control), 802.3u, 802.1p(QoS)

TRIBUTARY

GROUP

SLOTS TRIB 1 TRIB 2 TRIB 3 TRIB 4 CC4 W CC4 E T1 T2 T3 T4 T5 T6

4 X 155M N/A 2 X 155M N/A

2 x 155M 2 x 155M 1 x 155M 1 x 155M

STM-1/4 STM-1/4

(2 po rts) (2 po rts)

STM-1/4 STM-1/4


STM-1/4 STM-1/4


STM-1/4 STM-1/4


Maxi 252 E1 63 E1 63 E1 63 E1 63 E1

or 126 (1+1) 63 E1 63 E1 (P) 63 E1 63 E1 (P)

Max. 12 E3 3 E3 3 E3 3 E3 3 E3

or 6 (1+1) 3 E3 3 E3 (P) 3 E3 3 E3 (P)

32 FE or 4 GE

w/o protection8 FE or 1 GE 8 FE or 1 GE 8 FE or 1 GE 8 FE or 1 GE 8 FE 8 FE 8 FE 8 FE 8 FE 8 FE

16 FE or 2 GE w

1+1 protection8 FE or 1 GE

8 FE or 1 GE

Protection8 FE or 1 GE

8 FE or 1 GE

Protection

28 FOM w/o

protection7 FOM 7 FOM 7 FOM 7 FOM

14 FOM w 1+1

protection7 FOM

7 FOM

Protection7 FOM

7 FOM

Protection

EoPDH 64k to 2M to 8M per card

Use All QX3440 card 1 and 2 slots

BUS SDH to this 6 PDH

Cards

of 21E1 to 21 VC12

Maximum 6 x 4E1, unique clock

Maximum 3 x 4E1 , unique clock , 1+1 protection

Maximum 6 x 3E1, unique clock , SNCP protection *

Maximum 3 x 3E1, unique clock , 1+1 and SNCP protection

*

No SDH

4 x 2M 4 x 2M 4 x 2M 4 x 2M 4 x 2M 4 x 2M

PDH Tributaries

STM-4STM-4

protection

Link with MSP

(1+1)

2 x STM-12 x STM-1

protection2 x STM-1

2 x STM-1

protection

GLOBAL

PAYLOAD2 x 622M 2 x 622M

Link without

MSP

2 x STM-1 2 x STM-1 STM-1 STM-1

TG 1 TG2 AGGREGATES

STM-4 N/A

HX9500R CAPACITY WITH 2 CC4


HX9500 TRIBUTARY MODULES

High-Speed or High Density Access Tributary Modules (HS) plug-in Interface cards

STM-1/4 - OC-3/12 tributaries

63x ports E1/T1 tributaries




EoS (8xFE+1xGBE) Ethernet card with built in a L2 switch (E-Line/E-LAN)

EoS (8xFE+1xGBE) Ethernet card without switch (E-Line)

The High Speed card are can be used in HX9400R or HX9500R without modification.

Please looks to HX9400R datasheet for tributary specifications.

Low-Speed Access Tributary Modules (LS) plug-in Interface Cards

4x channel E1/T1

3 x channel E1 with SNCP 64K support*

8x channel Dry Contact I/O

8x channel 2W/4W E&M

8x channel G703-64K—Codirectionnal

2x channel G.SHDSL (2 pairs)

4x channel G.SHDSL (1 pairs)

12x channel FXS

12x channel FXO

8x channel OCU-DP

1x or 4x channel C37.94 (low speed optical)

8x port Bridge/Router EoPDH 64Kbps to 2M to 8Mbps

6x channel V.35

6x channel V.36

6x channel X.21

8x channel RS232, 8 RS485 and 8 Bridge RS232

The Low Speed PDH cards are can be used in QX3440/QX3440S or HX9500R without modification.

Please looks to QX3440 datasheet for tributary specifications.

DEFENSE

ELECTRONIC MONEY

POS-BANK

CAMPUS

BUSINESS CENTRE

COMMUNITY

UNIVERSITY

INDUSTRIAL

FACILITIES

AIRPORT

ROAD

SUBWAY

TRAIN

UTILITIES

ELCTRICITY

WATER

GAS

TELCO

www.cxr.anderson-jacobson.com

CXR ANDERSON JACOBSON & CXR LARUS

MANUFACTURES AND SALES EQUIPMENTS FOR

NETWORK ACCESS, TRANSMISSION & TIMING SYSTEM

...AND PROVIDES SOLUTIONS TO HIS CUSTOMERS

DEFENSE - ELECTRONIC MONEY - CAMPUS - INDUSTRIAL - FACILITIES - UTILITIES - TELCO

894 Faulstich Court

San Jose—CA95112—USA

Phone +1 ( 408 ) 573-2700

Email : [email protected]

Please contact for North America

Rue de l ’ Ornette

28410 Abondant – France

Tel. +33 (0 ) 2 37 62 87 90

Email: [email protected]

and for Europe, Africa

and other countries

hx9500 sdh/sonet & pdh modular multiplexer (en) · sncp-64k over pdh in sdh hx9500r the right...

Documents