hybrid hinged door · aluminium or vinyl wall cladding optional nail fix to flooring flooring sill...
TRANSCRIPT
Trend thermAL® Hybrid
Hinged DoorTECHNICAL DATA
Trend thermAL® Hinged Door | TAHD | Mk-1 | 30 Nov 2012
Features & Benefits
Size Range
Ordering Details
Installation
Cross Sectional Views
1Confidentiality Notice: This document and the information it contains are copyright and confidential to
Trend® Windows & Doors Pty Limited. Disclosure, use and copying in any form whatsoever, except as authorised by Trend thermAL® Windows & Doors in writing, are strictly prohibited. Patents and Design Registrations pending.
2Please note that drawings are not to scale
Trend thermAL® Hinged Door | TAHD | Mk-1 | 30 Nov 2012
Features & BenefitsTrend thermAL® Hinged Door
Confidentiality Notice: This document and the information it contains are copyright and confidential to Trend® Windows & Doors Pty Limited. Disclosure, use and copying in any form whatsoever, except as authorised by Trend thermAL® Windows & Doors in writing, are strictly prohibited. Patents and Design Registrations pending.
1 Glazing Trend thermAL® is designed to
accommodate up to 24mm double glazed units for maximum energy efficiency. With over 60 different glazing options there is a solution for any climate in Australia.
Among the lowest U-Values and SHGC available but at a significantly lower cost when compared to similar systems.
U-Value down to 2.5 SHGC range from 0.53 - 0.30 Cooling Efficiency 67% Heating Efficiency 52%
2 Composition Aluminium external surface for
maximum strength which can be powder coated in a range of standard and designer colours for a bold external finish
Rigid polymer ERP is available in 3 standard steadfast colours to complement internal finishes with a subtle appearance but complementing the external finish.
Rigid polymer ERP internal surface designed to reduce energy transfer for highest energy efficiency
Rigid polymer ERP is impact modified to ensure minimal damage even during construction.
Rigid polymer ERP is pre–stressed to eliminate excessive shrinkage or expansion and is also UV stabilised to withstand the harsh Australian climates
3 Locks Trend thermAL® Hinged Doors are
fitted with a 3 point patio deadlock for security.
4 Hingeds The door is hung on special offset
fast-fix Hingeds to eliminate binding. The door can also be supplied with Parliament Hingeds where the door is to swing out flush to brickwork.
5 Direction of Opening The door can be ordered as open
in or open out.
6 Safety Glazing Toughened Safety A Grade glass
with a visual motif at the mid point to provide added safety.
7 Frames Maximum Door Height 2400mm Maximum Door Width 980mm
8 Optional Insect Screen Door Flyscreen door available
9 Options Wide range of powdercoat
finishes available including timber powdercoat finishes.
ERP Colours Anodic Natural Matt White Matt Stone Beige
10 Protective Wrapping Protective wrapping for delivery
to site is a standard for all Trend thermAL® products.
Bushfire Protection
Xtreme® bushfire protection that has
been tested by CSIRO to BAL–40,
which is fully compliant to AS1530.8.1
within AS3959–2009 is available.
Size RangeTrend thermAL® Hinged Door
3Please note that drawings are not to scale
Trend thermAL® Hinged Door | TAHD | Mk-1 | 30 Nov 2012
Confidentiality Notice: This document and the information it contains are copyright and confidential to Trend® Windows & Doors Pty Limited. Disclosure, use and copying in any form whatsoever, except as authorised by Trend thermAL® Windows & Doors in writing, are strictly prohibited. Patents and Design Registrations pending.
All windows and doors are designed to 700pa velocity and 200pa water rating. For higher ratings consult Trend® Windows & Doors
STUD OPENIN
G
DOOR SIZE
2105
OI &
OO
2168
777
850
877
950
1299
1364
1499
1564
1699
1764
TAHD2107
720Leafs
TAHD2108
820Leafs
TAHD2113
620Leafs
TAHD2115
720Leafs
TAHD2117
820Leafs
Max
imum
Fra
me
Hei
ght 2
400m
m
620, 720 & 820 DOOR LEAF
Ordering DetailsTrend thermAL® Hinged Door
4Please note that drawings are not to scale
Trend thermAL® Hinged Door | TAHD | Mk-1 | 30 Nov 2012
Confidentiality Notice: This document and the information it contains are copyright and confidential to Trend® Windows & Doors Pty Limited. Disclosure, use and copying in any form whatsoever, except as authorised by Trend thermAL® Windows & Doors in writing, are strictly prohibited. Patents and Design Registrations pending.
All doors are illustrated as viewed from outside.
Codes shown are for plain doors. The first two numbers of code indicate approximate height, the last two numbers indicate approximate width.
Manufactured from aluminium and Rigid Polymer extrusion.
Sash Style Options:Standard option, eg door code TAHD2107
Configuration Options:E = Xtreme bushfire door (placed at the end of the code)
Pa refers to Pascal rating (wind pressure)
Option:Sidelite and Highlites available
General:Black hardware is supplied as standard
Aluminium exterior and Extruded Rigid Polymer (ERP) interior. ERP interior skin is available in three colours - white, anodic natural matt and stone beige.
The aluminium sill and external brick skin must be separated with an isolator to prevent possible reaction between brick and mortar and the aluminium frame which can lead to crevice corrosion.
Note:For information on different glass types or wind ratings, plase contact a Trend Windows & Doors sales representative.
InstallationTrend thermAL® Hinged Door | Building In Detail | Brick Veneer - 230mm wall
5Please note that drawings are not to scale
Trend thermAL® Hinged Door | TAHD | Mk-1 | 30 Nov 2012
Confidentiality Notice: This document and the information it contains are copyright and confidential to Trend® Windows & Doors Pty Limited. Disclosure, use and copying in any form whatsoever, except as authorised by Trend thermAL® Windows & Doors in writing, are strictly prohibited. Patents and Design Registrations pending.
SILL BRICK
FIXINGS AT 450mm CTRS
PACKING BY BUILDER
FLASHING BY BUILDER
FLASHING BY BUILDER
CONCRETE SLAB
OPTIONAL NAIL FIX TO SLAB
PACKING BY BUILDER
HEAD
No Packing12mm CLEARANCE
TRIMMERHEADER
FLASHING BY BUILDER
TIMBER REVEAL
TIMBER ARCHITRAVE BY BUILDER
SILL
SOFFIT LINING
QUAD BYBUILDER
10mm CLEARANCEBETWEEN SOFFIT LINING AND DOOR HEAD
FRA
ME
SIZE
TIMBER REVEAL
STU
D O
PEN
ING
= F
RA
ME
SIZE
+ 6
0mm
FRA
ME
SIZE
STUD
25
107,6
24,8
9
31,8
4
107,6
107,6
OUTSIDE
6Please note that drawings are not to scale
InstallationTrend thermAL® Hinged Door | Building In Detail | Double Brick - 280mm wall
Trend thermAL® Hinged Door | TAHD | Mk-1 | 30 Nov 2012
Confidentiality Notice: This document and the information it contains are copyright and confidential to Trend® Windows & Doors Pty Limited. Disclosure, use and copying in any form whatsoever, except as authorised by Trend thermAL® Windows & Doors in writing, are strictly prohibited. Patents and Design Registrations pending.
PACKING BY BUILDER
SILL BRICK
CEM
ENT R
END
ER
OPTIONAL NAIL FIX TO BRICKWORK
SILL
BRICKWORKBRICKWORK
STEEL LINTEL BY BUILDER
FRA
ME
SIZE
HEAD
FLASHING BY BUILDER
BRICKWORK
FLASHING BY BUILDER
FRA
ME
SIZE JAMB
BUILDING IN LUGS AT450mm CENTRES
BRICKWORK
BRICKWORK
FLASHING BY BUILDER
CEM
ENT R
END
ER
25,0
2
107,6
24,8
9
107,6
107,6
31,8
4
OUTSIDE
7Please note that drawings are not to scale
InstallationTrend thermAL® Hinged Door Window | Building In Detail | Aluminium Cladding on Studs
Trend thermAL® Hinged Door | TAHD | Mk-1 | 30 Nov 2012
Confidentiality Notice: This document and the information it contains are copyright and confidential to Trend® Windows & Doors Pty Limited. Disclosure, use and copying in any form whatsoever, except as authorised by Trend thermAL® Windows & Doors in writing, are strictly prohibited. Patents and Design Registrations pending.
PACKING BY BUILDER
12mm CLEARANCEANGLE TRIM BY BUILDER
FLASHING BY BUILDER
FLASHING BY BUILDER
FLOOR JOISTFLOOR JOIST
ALUMINIUM OR VINYLWALL CLADDING
OPTIONAL NAIL FIX TO FLOORING
FLOORING
SILL
TIMBER REVEAL
TRIMMERHEADER
TIMBER ARCHITRAVE BY BUILDER
NO PACKINGFR
AM
E SI
ZE
STU
D O
PEN
ING
= F
RA
ME
SIZE
+ 6
0mm
FLASHING BY BUILDER
STUD
STU
D O
PEN
ING
= F
RA
ME
SIZE
+ 6
0mm
ALUMINIUM OR VINYLWALL CLADDING
107,6
25,0
2
OUTSIDE
24,8
9
107,6
31,8
4
107,6