hybrid stacker door - trendwindowsanddoors.com.au
TRANSCRIPT
Trend thermAL® Hybrid
Stacker DoorTECHNICAL DATA
Trend thermAL® Stacker Door | TASD | Mk-1 | 30 Nov 2012
Features & Benefits
Size Range
Ordering Details
Installation
Cross Sectional Views
1Confidentiality Notice: This document and the information it contains are copyright and confidential to
Trend® Windows & Doors Pty Limited. Disclosure, use and copying in any form whatsoever, except as authorised by Trend thermAL® Windows & Doors in writing, are strictly prohibited. Patents and Design Registrations pending.
2Please note that drawings are not to scale
Trend thermAL® Stacker Door | TASD | Mk-1 | 30 Nov 2012
Features & BenefitsTrend thermAL® Sliding Stacker Door
Confidentiality Notice: This document and the information it contains are copyright and confidential to Trend® Windows & Doors Pty Limited. Disclosure, use and copying in any form whatsoever, except as authorised by Trend thermAL® Windows & Doors in writing, are strictly prohibited. Patents and Design Registrations pending.
1 Glazing Trend thermAL® is designed to
accommodate up to 24mm double glazed units for maximum energy efficiency. With over 60 different glazing options there is a solution for any climate in Australia.
Among the lowest U-Values and SHGC available but at a significantly lower cost when compared to similar systems.
U-Value down to 2.5 SHGC range from 0.65 - 0.36 Cooling Efficiency 62% Heating Efficiency 56%
2 Composition Aluminium external surface for
maximum strength which can be owder coated in a range of standard and designer colours for a bold external finish
Rigid polymer ERP is available in 3 standard steadfast colours to complement internal finishes with a subtle appearance but complementing the external finish.
Rigid polymer ERP internal surface designed to reduce energy transfer for highest energy efficiency
Rigid polymer ERP is impact modified to ensure minimal damage even during construction.
Rigid polymer ERP is pre–stressed to eliminate excessive shrinkage or expansion and is also uV stabilised to withstand the harsh Australian climates
3 Locks Trend thermAL® Stacker doors
are fitted with double cylinder deadlock as standard and has a
double parrot beak with a 2 point locking system. Striker plate is mounted with full fixing to jamb for added security.
4 Safety Glazing Toughened Safety A Grade glass
with a visual motif at the mid point to provide added safety.
6 Heavy Duty Rollers Trend thermAL® door uses a heavy
duty, double bogey roller system for smooth operation.
The marine alloy aluminium carriage reduces the chance of corrosion ensuring a long and smoother operation.
6 Frames Maximum Door Heights 2400mm Maximum Door Panels 1200mm
7 Optional Heavy Duty Barrier and Insect Screen Door
The sturdy extruded aluminium, external Stacker flydoor is fitted with spring loaded acetal wheels that ensure the insect screen door stays on the track and opens smoothly.
8 Options Wide range of powdercoat
finishes available including timber powdercoat finishes.
ERP Colours Anodic Natural Matt White Matt Stone Beige
9 Protective Wrapping Protective wrapping for delivery
to site is a standard for all Trend thermAL® products.
Bushfire protection up to BAL-29
Size RangeTrend thermAL® Stacker Door
3Please note that drawings are not to scale
Trend thermAL® Stacker Door | TASD | Mk-1 | 30 Nov 2012
Confidentiality Notice: This document and the information it contains are copyright and confidential to Trend® Windows & Doors Pty Limited. Disclosure, use and copying in any form whatsoever, except as authorised by Trend thermAL® Windows & Doors in writing, are strictly prohibited. Patents and Design Registrations pending.
All windows and doors are designed to 700pa velocity and 200pa water rating. For higher ratings consult Trend® Windows & Doors
2100
2160
4446
4506
5346
5406
STUD OPENING
DOOR SIZE
2100
2160
2235
2295
2685
2745
3135
3195
3585
3645
STUD OPENING
DOOR SIZE
6246
6306
TASD2122 TASD2127 TASD2131 TASD2136
TASD2144 TASD2153 TASD2162
Ordering DetailsTrend thermAL® Stacker Door
4Please note that drawings are not to scale
Trend thermAL® Stacker Door | TASD | Mk-1 | 30 Nov 2012
Confidentiality Notice: This document and the information it contains are copyright and confidential to Trend® Windows & Doors Pty Limited. Disclosure, use and copying in any form whatsoever, except as authorised by Trend thermAL® Windows & Doors in writing, are strictly prohibited. Patents and Design Registrations pending.
All doors are illustrated as viewed from outside.
Codes shown are for plain doors. The first two numbers of code indicate approximate height, the last two numbers indicate approximate width.
Manufactured from aluminium and Rigid Polymer extrusion.
Sash Style Options:Standard option, eg door TASD2122
Configuration Options: XXF = Sliding/Sliding/Fixed FXX = Fixed/Sliding/Sliding FXXXXF = Fixed/Sliding/Sliding/Sliding/Sliding/Fixed
Maximum height 2400mm
Pa refers to Pascal rating (wind pressure)Aluminium exterior and Extruded Rigid Polymer (ERP) interior. ERP interior skin is available in three colours - white, anodic natural matt and stone beige
The aluminium sill and external brick skin must be separated with an isolator to prevent possible reaction between brick and mortar and the aluminium frame which can lead to crevice corrosion.
General:Black hardware is supplied as standard
Option:Three panel doors is available as reverse to what is shown on size range chart
Three lite door available in reverse to what is shown on size range chart
Note:For information on different glass types or wind ratings, plase contact a Trend Windows & Doors sales representative.
InstallationTrend thermAL® Stacker Door | Building In Detail | Brick Veneer - 230mm wall
5Please note that drawings are not to scale
Trend thermAL® Stacker Door | TASD | Mk-1 | 30 Nov 2012
Confidentiality Notice: This document and the information it contains are copyright and confidential to Trend® Windows & Doors Pty Limited. Disclosure, use and copying in any form whatsoever, except as authorised by Trend thermAL® Windows & Doors in writing, are strictly prohibited. Patents and Design Registrations pending.
SILL BRICK
FIXINGS AT 450mm CTRS
PACKING BY BUILDER
14
155
FLASHING BY BUILDER
FLASHING BY BUILDER
CONCRETE SLAB
OPTIONAL NAIL FIX TO SLAB
PACKING BY BUILDER
44
155
HEAD
37
155
No Packing12mm CLEARANCE
TRIMMERHEADERFLASHING BY BUILDER
TIMBER REVEAL
TIMBER ARCHITRAVE BY BUILDER
SILL
SOFFIT LINING
QUAD BYBUILDER
10mm CLEARANCEBETWEEN SOFFIT LINING AND DOOR HEAD
FRA
ME
SIZE
TIMBER REVEAL
STU
D O
PEN
ING
= F
RA
ME
SIZE
+ 6
0mm
FRA
ME
SIZE
STUD
6Please note that drawings are not to scale
InstallationTrend thermAL® Stacker Door | Building In Detail | Double Brick - 280mm wall
Trend thermAL® Stacker Door | TASD | Mk-1 | 30 Nov 2012
Confidentiality Notice: This document and the information it contains are copyright and confidential to Trend® Windows & Doors Pty Limited. Disclosure, use and copying in any form whatsoever, except as authorised by Trend thermAL® Windows & Doors in writing, are strictly prohibited. Patents and Design Registrations pending.
PACKING BY BUILDER
SILL BRICK
CEM
ENT R
END
ER
14
155
155
OPTIONAL NAIL FIX TO BRICKWORK
44
SILL
37
155
BRICKWORKBRICKWORK
OUTSIDESTEEL LINTEL BY BUILDER
FRA
ME
SIZE
HEAD
FLASHING BY BUILDER
BRICKWORK
FLASHING BY BUILDER
FRA
ME
SIZE
JAMB
BUILDING IN LUGS AT450mm CENTRES
BRICKWORKBRICKWORK
FLASHING BY BUILDER
CEM
ENT R
END
ER
7Please note that drawings are not to scale
InstallationTrend thermAL® Stacker Door Window | Building In Detail | Aluminium Cladding on Studs
Trend thermAL® Stacker Door | TASD | Mk-1 | 30 Nov 2012
Confidentiality Notice: This document and the information it contains are copyright and confidential to Trend® Windows & Doors Pty Limited. Disclosure, use and copying in any form whatsoever, except as authorised by Trend thermAL® Windows & Doors in writing, are strictly prohibited. Patents and Design Registrations pending.
PACKING BY BUILDER
90 10
12mm CLEARANCEANGLE TRIM BY BUILDER
DRESS SARKING INTO CLADDING "U" TRIM AT HEAD AS SHOWN
FLASHING BY BUILDER
FLASHING BY BUILDER
ANGLE TRIM BY BUILDER
TIMBER SUPPORT
ANGLE TRIM BY BUILDER
FLOOR JOISTFLOOR JOIST
ALUMINIUM OR VINYLWALL CLADDING
OPTIONAL NAIL FIX TO FLOORING
FLOORING
44
155
SILL
37
155
TIMBER REVEAL
TRIMMERHEADER
TIMBER ARCHITRAVE BY BUILDER
NO PACKING
OUTSIDEFR
AM
E SI
ZE
STU
D O
PEN
ING
= F
RA
ME
SIZE
+ 6
0mm
FLASHING BY BUILDER
TIMBER REVEAL
PACKINGBY BUILDER
STUD
ALU
MIN
IUM
OR
VINYL W
ALL C
LAD
DIN
G
STU
D O
PEN
ING
= F
RA
ME
SIZE
+ 6
0mm
ALUMINIUM OR VINYLWALL CLADDING
8Please note that drawings are not to scale
Cross Sectional ViewsTrend thermAL® Stacker Door |
Trend thermAL® Stacker Door | TASD | Mk-1 | 30 Nov 2012
Confidentiality Notice: This document and the information it contains are copyright and confidential to Trend® Windows & Doors Pty Limited. Disclosure, use and copying in any form whatsoever, except as authorised by Trend thermAL® Windows & Doors in writing, are strictly prohibited. Patents and Design Registrations pending.
3 Lite - Double Glazed
51
37
44
37
156
156
38
20
9Please note that drawings are not to scale
Cross Sectional ViewsTrend thermAL® Stacker Door |
Trend thermAL® Stacker Door | TASD | Mk-1 | 30 Nov 2012
Confidentiality Notice: This document and the information it contains are copyright and confidential to Trend® Windows & Doors Pty Limited. Disclosure, use and copying in any form whatsoever, except as authorised by Trend thermAL® Windows & Doors in writing, are strictly prohibited. Patents and Design Registrations pending.
51
39
44
39
156
156 20
3 Lite - Double Glazed
10Please note that drawings are not to scale
Cross Sectional ViewsTrend thermAL® Stacker Door |
Trend thermAL® Stacker Door | TASD | Mk-1 | 30 Nov 2012
Confidentiality Notice: This document and the information it contains are copyright and confidential to Trend® Windows & Doors Pty Limited. Disclosure, use and copying in any form whatsoever, except as authorised by Trend thermAL® Windows & Doors in writing, are strictly prohibited. Patents and Design Registrations pending.
51
39
44
39
156
156
38
20
3 Lite - Double Glazed
11Please note that drawings are not to scale
Cross Sectional ViewsTrend thermAL® Stacker Door |
Trend thermAL® Stacker Door | TASD | Mk-1 | 30 Nov 2012
Confidentiality Notice: This document and the information it contains are copyright and confidential to Trend® Windows & Doors Pty Limited. Disclosure, use and copying in any form whatsoever, except as authorised by Trend thermAL® Windows & Doors in writing, are strictly prohibited. Patents and Design Registrations pending.
3 Lite - Double Glazed
51
14
37
156
45
45
67
12Please note that drawings are not to scale
Cross Sectional ViewsTrend thermAL® Stacker Door |
Trend thermAL® Stacker Door | TASD | Mk-1 | 30 Nov 2012
Confidentiality Notice: This document and the information it contains are copyright and confidential to Trend® Windows & Doors Pty Limited. Disclosure, use and copying in any form whatsoever, except as authorised by Trend thermAL® Windows & Doors in writing, are strictly prohibited. Patents and Design Registrations pending.
6 Lite - Double Glazed
51
156
14
37
45
4545
104
45