hydraulic planetary gear winches the quality is … · hydraulic planetary gear winches en 14492-1...
TRANSCRIPT
EPH PLANETARY WINCHESModel EPH are hydraulic planetary winches. Designed for extend life and give best safe duty. This winch is built according with higher safety standards in compliance with Directive Machinery 2006/24/CE Harmonized EN 14492-1. The high efficiency planetary gear train assure fast payout and rewind winching operational and the innovative brake system, make these winches reliable and great for industrial applications.
FEATURES
1The Quality is Transparent
HYDRAULIC PLANETARY GEAR WINCHES
EN 14492-1
❏ COMPACTHardened steel two stage planetary gear trainclass M4 L1 T5 (FEM 1.001/1987) EPH 10000class M3 L1 T4 (FEM 1.001/1987) EPH 12200
❏ FAST WINCHING SPEEDFast payout and rewind
❏ VERSATILE MOUNTINGDesigned for either base or side mounting
❏ STRONGStrong Body for extended heavy-duty cycle
❏ MULTI-DISC PRESSURE RELEASED BRAKE Gives a reliable and effective full brake capacity
1. HEAVY-DUTY ROLLER FAIRLEADHeavy duty mounting frame with zinc plated finish.Large diameter rollers, fitted with bearings, for reduced maintenance and increased rope life.
2. CABLE TENSIONERStrong frame with heavy duty springs, zinc plated fini-sh with roller working on bearings, prevents wire rope tangling when free spooling.
3. BASE MOUNTING ANGLES Standard base mounting angles
4. AIR CLUTCHCompact air - cylinder based on Vime’s own design. Out put shaft is visible when the drum is in the disengaged position.
5. DRUMWedge pocket system in according with CE Machinery Directive to prevent rope release.
MODEL RATED LINE PULL
EPH 10000 10.000 Kgs. (22.046 Lbs.)
EPH 12200 12.200 Kgs. (26.896 Lbs.)
6. FULL LOAD HOLDING BRAKEMulti-disc pressure released brake, designed using special heavy duty components to assure full brake performance and reliability, controlled by a noiseless,overcenter valve.
7. HYDRAULIC MOTOROrbital hydraulic motor, splined output shaft.
8. OVERCENTER VALVESpecial noiseless overcenter valve based on Vime’s design.
❏ DRUM SIZE AVAILABLE Standard: 335 mm (13.2 inch)
❏ TOTALLY OIL COOLED Gears and brake in oil bath for best performance, quiet operation and extended component life
ACCESSORIES : ❏ Zinc plated heavy-duty roiller fairlead ❏ Zinc plated Cable tensioner ❏ Manual clutch shifter - drum free spooling
WINCHES RANGE
PLANETARY
COMPONENTS
21 6
7
8
5
4
3
LINE PULL 1st LAYER
GEAR RATIO
WORKING PRESSURE
LINE SPEED 1st LAYER
WIRE ROPE SIZE
WIRE ROPECAPACITY
MAX. WIRE ROPE CAPACITY EN 14492-1
MAX. WIRE ROPE CAPACITY ** DESCRIPTION WEIGHT
LBS KGS PSI BAR FT/MIN MT/MIN INCH MM FT MT FT MT FT MT WINCH (without wire rope) 418,88 lbs 190 kgs
22.046 10.000 22,1:1 2,756 190 34,1 10,4 - 14 219,8 67 298,6 91 449,5 137 ACCESSORY : ROLLER FAIRLEAD 73,85 lbs 33,5 kgs
- - - - - - - - - - - - - - - ACCESSORY : CABLE TENSIONER 20,94 lbs 9,5 kgs
Hydraulic Motor...................................................................................................................(9,8 cu in)...160 cc Max. oil flow............................................................................................................(19,81 GPM)...75 Lt./Min.Air clutch working pressure..........................................Min...(87 Psi)...6 Bar.....................Max...(145 Psi)...10 Bar
2The Quality is Transparent
On request at the order, EPH winches can be equipped with manual clutch shifter.Clutch allows the operator to manually disengage the spooling drum from the gear train, enabling the drum to rotate freely (freespooling).Engaging the clutch, it locks the winch drum back onto the gear train.
MANUAL CLUTCH VERSION
301,2
2158,5
47018,5
2158,5
441,7
39515,6
1726,8
1044,1
1204,7
2359,3
2359,3
230,9
230,9
401,6
481,9
401,6
200,8
371,5
783,1
702,8
33513,2 67
E(Y)
2,7
80 E(X)
3,2
491,9
97938,6
97938,6
1857,3
35013,8
1003,9
1003,9
55021,7
100
3,9100,
4
130,5
34013,4
27410,8
602,4
61024,0
1606,3
246
9,7
420
16,5
702,8
35514,0
376MAX
14,8
582,3
56822,4
EPH winches are equipped with Air clutch shifter. An air cylinder allows to pneumatically disengage the spooling drum from the gear train, enabling the drum to rotate freely (freespooling). The pneumatic system works if air system is available on vehicle only.Manual clutch shifter is considered such an optional accessory.
AIR CLUTCH VERSION
301,2
2158,5
47018,5
2158,5
93036,6
441,7
39515,6
1726,8
973,8
19 E(Y)
0,7
1044,1
1204,7
33513,2
2359,3
2359,3
11E(X)
0,4230,9
230,9
401,6
481,9
401,6
200,8
371,5
93036,6
702,8
1857,3
35013,8
1003,9
1003,9
55021,7
1003,9100,
4
130,5
34013,4
27410,8
1606,3
602,4
61024,0
42316,6
2469,7
702,8
35514,0
542,1
56422,2
377MAX
14,8
EN 14492-1 EN 14492-1
HYDRAULIC PLANETARY GEAR WINCHES
Dimensions :Inch
MillimetersDimensions :
Inch
Millimeters DIMENSIONAL DATA DIMENSIONAL DATA
TECHNICAL DATA
NOTE: Specifications are subject to change without notification and without incurring obligation. Specifications in this publication are theoretical and may vary depending on hydraulic system, environment,etc.
NOTE: Wire rope size must be respected. Recommended wire rope min.tensile strength 2160 N/mm2.Wire rope minimum breaking load must be at least double of winch max. pulling capacity.Max.wire rope capacity according with EN 14492-1.
** Max wire rope capacity corresponding to the full drum condition.
WARNINGDo not use winch to lift support or transport personnel.
LINE PULL 1st LAYER
GEAR RATIO
WORKING PRESSURE
LINE SPEED 1st LAYER
WIRE ROPE SIZE
WIRE ROPECAPACITY
MAX. WIRE ROPE CAPACITY EN 14492-1
MAX. WIRE ROPE CAPACITY ** DESCRIPTION WEIGHT
LBS KGS PSI BAR FT/MIN MT/MIN INCH MM FT MT FT MT FT MT WINCH (without wire rope) 429,90 lbs 195 kgs
26.896 12.200 16,7:1 2,756 190 26,9 8,2 - 16 154,2 47 229,7 70 295,3 90 ACCESSORY : ROLLER FAIRLEAD 73,85 lbs 33,5 kgs
- - - - - - - - - - - - - - - ACCESSORY : CABLE TENSIONER 20,94 lbs 9,5 kgs
Hydraulic Motor.................................................................................................................(15,3 cu in)...250 cc Max. oil flow............................................................................................................(19,81 GPM)...75 Lt./Min.Air clutch working pressure..........................................Min...(87 Psi)...6 Bar.....................Max...(145 Psi)...10 Bar
3The Quality is Transparent
451.8
2158.5
47018.5
2158.5
441.7
39515.6
1726.8
1044.1
1355.3
2359.3
2359.3
230.9
230.9
401.6
481.9
401.6
200.8
371.5
783.1
702.8
33513.2 67
E(Y)
2.7
80 E(X)
3.2
491.9
99439.1
97938.6
1857.3
35013.8
1003.9
1003.9
55021.7
100
3.9100.
4
130.5
34013.4
27410.8
602.4
61024.0
1606.3
246
9.7
420
16.5
702.8
35514.0
376MAX
14.8
582.3
56822.4
451.8
2158.5
47018.5
2158.5
94537.2
441.7
39515.6
1726.8
973.8
19 E(Y)
0.7
1044.1
1355.3
33513.2
2359.3
2359.3
11E(X)
0.4230.9
230.9
401.6
481.9
401.6
200.8
371.5
93036.6
702.8
1857.3
35013.8
1003.9
1003.9
55021.7
1003.9100.
4
130.5
34013.4
27410.8
1606.3
602.4
61024.0
42316.6
2469.7
702.8
35514.0
542.1
56422.2
377MAX
14.8
EN 14492-1 EN 14492-1
Dimensions :Inch
MillimetersDimensions :
Inch
Millimeters
On request at the order, EPH winches can be equipped with manual clutch shifter.Clutch allows the operator to manually disengage the spooling drum from the gear train, enabling the drum to rotate freely (freespooling).Engaging the clutch, it locks the winch drum back onto the gear train.
MANUAL CLUTCH VERSIONEPH winches are equipped with Air clutch shifter. An air cylinder allows to pneumatically disengage the spooling drum from the gear train, enabling the drum to rotate freely (freespooling). The pneumatic system works if air system is available on vehicle only.Manual clutch shifter is considered such an optional accessory.
AIR CLUTCH VERSION
HYDRAULIC PLANETARY GEAR WINCHES
DIMENSIONAL DATA DIMENSIONAL DATA
TECHNICAL DATA
NOTE: Specifications are subject to change without notification and without incurring obligation. Specifications in this publication are theoretical and may vary depending on hydraulic system, environment,etc.
NOTE: Wire rope size must be respected. Recommended wire rope min.tensile strength 2160 N/mm2.Wire rope minimum breaking load must be at least double of winch max. pulling capacity.Max.wire rope capacity according with EN 14492-1.
** Max wire rope capacity corresponding to the full drum condition.
WARNINGDo not use winch to lift support or transport personnel.