superstructurehydraulic+crawler+crane.pdf · 2009-05-04 · main hoisting mechanism rated line pull...

41
SCC2000 HYDRAULIC CRAWLER CRANE TO BE AN UPRIGHT PERSON FIRST BEFORE DOING THINGS. QUALITY CHANGES THE WORLD 1 Introduction Superstructure Engine Imported Cummins QLS9 in-line 6-cylinder, water-cooled, EFI, turbo-charging and inter-cooling diesel engine with a rated power of 242kW and rated rotational speed of 2100rpm. The maximum output torque is 1424N·m, and rotational speed at maximum output torque is 1500rpm. It is equipped with a 400L diesel fuel tank. Control System It is a full hydraulic-control system, which can be able to control the main and aux. winches, brake, luffing mechanism, swing and traveling mechanism precisely and steadily. Hydraulic System The hydraulic system is composed of three parts: main loop system, control system and auxiliary system. Most hydraulic components are of Bosch Rexroth product or closed-type Kawasaki product. Swing mechanism adopts closed-loop hydraulic system, which features quick operating response, steady actuation, little heat radiation and long service life. The main pump is of variable displacement pump and constant power pump open-loop hydraulic system, featuring a system pressure of 32MPa. Main and Auxiliary Hoisting Mechanism Variable displacement hydraulic motor drives planetary gear speed reducer to control the hoisting and lowering operation of the main and aux. winches, and can realize maximum winch speed by automatically adjusting the displacement according to the load. Diameter of drum 580mm Speed of the outermost working layer of wire rope 0120 m/min Diameter of wire rope 26mm The length of wire rope of main winch 450m Main hoisting mechanism Rated line pull 13.5t Diameter of drum 580mm Speed of the outermost working layer of wire rope 0120 m/min Diameter of wire rope 26mm The length of wire rope of Aux. winch 380m Aux. hoisting device Rated line pull 13.5t Luffing Device Luffing drum is equipped with ratchet and pawl locking gear, ensuring the safety of boom under non operating conditions.

Upload: others

Post on 02-Aug-2020

0 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: SuperstructureHydraulic+Crawler+Crane.pdf · 2009-05-04 · Main hoisting mechanism Rated line pull 13.5t Diameter of drum 580mm Speed of the outermost working layer of wire rope

SCC2000 HYDRAULIC CRAWLER CRANE

TO BE AN UPRIGHT PERSON FIRST BEFORE DOING THINGS.

QUALITY CHANGES THE WORLD

1

Introduction

Superstructure

Engine

Imported Cummins QLS9 in-line 6-cylinder, water-cooled, EFI, turbo-charging and inter-cooling diesel engine with a rated power of 242kW and rated rotational speed of 2100rpm. The maximum output torque is 1424N·m, and rotational speed at maximum output torque is 1500rpm. It is equipped with a 400L diesel fuel tank.

Control System It is a full hydraulic-control system, which can be able to control the main and aux. winches, brake, luffing mechanism, swing and traveling mechanism precisely and steadily.

Hydraulic System The hydraulic system is composed of three parts: main loop system, control system and auxiliary system. Most hydraulic components are of Bosch Rexroth product or closed-type Kawasaki product. Swing mechanism adopts closed-loop hydraulic system, which features quick operating response, steady actuation, little heat radiation and long service life. The main pump is of variable displacement pump and constant power pump open-loop hydraulic system, featuring a system pressure of 32MPa.

Main and Auxiliary Hoisting

Mechanism

Variable displacement hydraulic motor drives planetary gear speed reducer to control the hoisting and lowering operation of the main and aux. winches, and can realize maximum winch speed by automatically adjusting the displacement according to the load.

Diameter of drum 580mm

Speed of the

outermost working

layer of wire rope

0~120 m/min

Diameter of wire

rope 26mm

The length of wire

rope of main winch 450m M

ain

hois

ting

mec

hani

sm

Rated line pull 13.5t

Diameter of drum 580mm

Speed of the

outermost working

layer of wire rope

0~120 m/min

Diameter of wire

rope 26mm

The length of wire

rope of Aux. winch 380m

Aux

. hoi

stin

g de

vice

Rated line pull 13.5t

Luffing Device

Luffing drum is equipped with ratchet and pawl locking gear, ensuring the safety of boom under non operating conditions.

Page 2: SuperstructureHydraulic+Crawler+Crane.pdf · 2009-05-04 · Main hoisting mechanism Rated line pull 13.5t Diameter of drum 580mm Speed of the outermost working layer of wire rope

SCC2000 HYDRAULIC CRAWLER CRANE

TO BE AN UPRIGHT PERSON FIRST BEFORE DOING THINGS.

QUALITY CHANGES THE WORLD

2

Diameter of drum 530mm

Speed of the outermost

working layer of wire

rope

(0~26)

×2

m/min

Diameter of wire rope 22mm

The length of wire rope

of boom luffing winch 340m B

oom

luffi

ng m

echa

nism

Rated line pull 10.5t

Diameter of drum 522mm

Speed of the outermost

working layer of wire

rope

0~25

m/min

Diameter of wire rope 22mm

The length of wire rope

of jib luffing mechanism 260m Ji

b lu

ffing

mec

hani

sm

Rated line pull 10.5t

Swing Mechanism

Swing device: Driven by swinging motor and with an allowable swing angle of 360-degree. Swing brake: Disc structure, locked by spring and opened hydraulically. Swing locking gear: Locking gear is equipped to ensure no impact on the swing of upper structure when the crane traveling or transporting. Swing bearing: It is a three-row roller swing bearing, featuring a model 134.45.2240, roller diameter of Ф45, and the diameter of roller track center circle of Ф2240. Swing speed: 0~1.35 r/min(No load)

Swing Table

The swing table is a steel structure, which is

composed of left and right platform and main platform and which fully welded. The entire swing table is connected with the chassis through swing bearing. The main hoisting mechanism, auxiliary hoisting mechanism, boom luffing mechanism, hydraulic system, engine system and cab are all mounted on the swing table, and the boom luffing mast, operating equipment and counterweight block are connected with different positions of the swing table respectively in a fixed manner.

Boom Luffing Mast

It is a high-strength steel plate weldment, and mounted on the boom luffing mast stabilizer located at the front of swing table. Sheave block featuring 22 multiplying factor is mounted at the top of boom luffing mast.

Counterweight Counterweight is classified into upper- structure counterweight and lower-structure counterweight, of which upper- structure counterweight is 80t, and lower-structure counterweight is 22t, featuring quick assembly and disassembly and very convenient to transport.

Cover

Left hood: In the front of it, there is a climbing–up handle, which can be removed during transportation, at the top of it, there is a water inlet of water tank, outside the hood, there are 7 access doors, each of which is furnished with silencing sponge, and at the inner side, there is shutter. Right hood: It is single leaf structure, convenient for walking and maintenance on the platform.

Cab

Page 3: SuperstructureHydraulic+Crawler+Crane.pdf · 2009-05-04 · Main hoisting mechanism Rated line pull 13.5t Diameter of drum 580mm Speed of the outermost working layer of wire rope

SCC2000 HYDRAULIC CRAWLER CRANE

TO BE AN UPRIGHT PERSON FIRST BEFORE DOING THINGS.

QUALITY CHANGES THE WORLD

3

Rotational-design, fully-closed and wide- vision cab is furnished with air conditioner, handle ,adjustable seat, control console, armrest, moment limiter, alarm light, and alarm loudspeaker, and designed according to ergonomics. Armrest box: The left and right armrest boxes and auxiliary control box are furnished with various handles and electrical switches. Cab seat: Standard configuration and adjustable Air-conditioner: Cooling and heating air conditioner AM/FM radio set: Standard configuration with clock Powder fire extinguisher: Standard configuration with a capacity of 1kg.

Control Operation

At the front bottom of the operator, there are handle and travel pedal with left travel pedal (handle) drives left crawler, and right travel pedal (handle) drives right crawler, and next to the right travel pedal, there is pedal throttle. The handles of main winch and boom luffing of Rexroth system are located on the right armrest box, while the engine startup switch, micro-speed control knob and hydraulic servo pressure gauge are also located on the right armrest box. Of Rexroth system, the handles of jib luffing/swing mechanism, handle of jib winch, and swing/jib luffing change-over switch, smoke lighter and air conditioner control panel are located on the left armrest box. Of Kawasaki system, the handles of main winch, auxiliary winch and boom luffing mechanism are mounted on the front of right armrest box, while the engine startup switch, micro-speed control knob, mode switching knob, oil channel switching, hand throttle

control, and relief switch knobs are also located on the right armrest box. Of Kawasaki system, the handles of jib luffing and swing mechanism, and smoke lighter, pressure monitoring gauge, swing/jib luffing change-over switch, swing locking control switch, various control switches, indicator lights, radio set and air conditioner control panel are located on the left armrest box. Hand throttle handle and swing locking button are located at the left of left armrest box. The switch panel of auxiliary control box is located at the front left of the operator, achieving corresponding functions manually, while moment limiter display and digital monitor are located at the side of the switch panel of auxiliary control box, displaying various relevant real-time information.

Alarm Display

When any error occurs, all the alarm information about wind speed, water temperature, oil temperature, oil volume, oil pressure, operating time, and engine revolution will be shown on the screen in the cab.

Lowerstructure

Travel Driving Mechanism

Each crawler frame is equipped with independent travel driving mechanism. The hydraulic travel motor drives planetary gear speed reducer and achieves independent travel through the transmission of driving wheel.

Travel Brake

Travel brake is a constantly-closed (i.e. it will be under barking status when the control pedal valve is not stepped down) disc brake, which is installed in the speed reducer. It can be

Page 4: SuperstructureHydraulic+Crawler+Crane.pdf · 2009-05-04 · Main hoisting mechanism Rated line pull 13.5t Diameter of drum 580mm Speed of the outermost working layer of wire rope

SCC2000 HYDRAULIC CRAWLER CRANE

TO BE AN UPRIGHT PERSON FIRST BEFORE DOING THINGS.

QUALITY CHANGES THE WORLD

4

compensated automatically without any adjustment. When the control pedal valve is stepped down, the braking will be released and the carne will travel.

Track Shoe

The travel mechanism of left/right crawler is composed of 146 crawler pads, each of which features a width of 1100mm. The tensioning level of crawler pads can be adjusted through hydraulic jack, with the position of adjusting spacer at an ideal tensioning degree.

Chassis

It is a frame structure made of high-strength welded framework, which is connected with crawler frame by hydraulic oil cylinder- driven power pin, easy for assembly and disassembly.

Travel Speed

Variable displacement motor can achieve dual speed travel at low speed 0~0.65 km/h and high speed 0~1.3 km/h.

Operating Equipment

Boom

High-strength main chord pipes are adopted. The boom is spatial truss structure with uniform cross section at both ends. It is welded by using steel pipes, and the end and bottom of the boom frame are reinforced by steel plate so as to transfer load. Standard configuration: boom base 8m, boom tip 8.5m, boom insert 3m×1, 6m×1, 12m×5. The length of boom is between basic boom length (16.5m) and maximum length (85.5m)

Fixed Jib (Optional )

High-strength main chord pipes are adopted. The fixed jib is spatial truss structure with

uniform cross section in the middle and variable cross section at both ends. It is welded by using steel pipes, and the end and bottom of the jib frame are reinforced by steel plate so as to transfer load. Jib tip (5m), Jib base (5m), and jib insert (3m×1, 6m×3) can be installed on the main boom of 40.5m, 43.5m, 46.5m, 49.5m, 52.5m, 55.5m, 58.5m, 61.5m, 64.5m, 67.5m, 70.5m, or 73.5m. The jib can be of 13m, 19m, 25m or 31m.

Boom Extension (Optional)

It is a welded structure with a sheave on its top, and it is connected with the boom tiop by pin shaft

Luffing Jib

High-strength main chord pipes are adopted. The luffing jib is spatial truss structure with uniform cross section at both ends. It is welded by using steel pipes, and the end and bottom of the jib frame are reinforced by steel plate so as to transfer load. Jib tip (6.5m), Jib base (6.5m), and jib insert (3m×1, 6m×2 and 12m×2) can be installed on the main boom with length of 37m, 40m, 43m, 46m, 49m, 52m, 55m or 58m. The jib can be 22m, 25m, 31m, 37m, 43m or 52m.

Hook Block

Standard Configuration 13.5t hook block 80t hook block 200t hook block

Optional

35t hook block 100t hook block 150t hook block

Page 5: SuperstructureHydraulic+Crawler+Crane.pdf · 2009-05-04 · Main hoisting mechanism Rated line pull 13.5t Diameter of drum 580mm Speed of the outermost working layer of wire rope

SCC2000 HYDRAULIC CRAWLER CRANE

TO BE AN UPRIGHT PERSON FIRST BEFORE DOING THINGS.

QUALITY CHANGES THE WORLD

5

Note: The configuration of above-mentioned operating equipments is of full configuration, with concrete configuration made under the procurement contract.

Safety Device

Moment Limiter

It features a standard configuration and can be obtained from optional manufacturer. As an independent safety control system completely controlled by computer, moment limiter can not only automatically measure the weight hoisted by the crane and the angle of boom, but can also display the rated hoisting capacity, actual load, operating radius and boom angle. Composition: Display, main frame, angle sensor, force sensor. Feature: When the actual load is less than 90% of the rated load, the “Normal” light of the display will be on. When the actual load reaches to 90% of the rated load, the “90%” light of the display will be on, and at the same time the buzzer on the moment limiter will begin to continuously give a sound for early warning. When the actual load reaches to 100% of the rated load, the “100%” light will be on, and at the same time the buzzer on the moment limiter will begin to continuously accelerate the sounding for warning. When the actual load reaches to 105% of the rated load, the “105%” light will be on, and at the same time the buzzer on the moment limiter will give a sound for a long time in order for warning, the relay will actuate, and the hoisting operation and the boom operating radius increase operation will be stopped automatically.

Anti-over-winding Device of

Main/Auxiliary Hook Block

Limit switch is used to prevent the hook block from being over-hoisted. When the hook block is hoisted to a certain height, the limit switch will actuate to have the buzzer on the takes control console give an alarm and the hoisting operation of hook block stopped automatically through electronic and hydraulic control, but only the lowering operation can be executed, so that the hook block over-winding will be avoided.

Anti-over-release Device of

Main/Auxiliary Hook Block It is composed of motion trigger device and proximity switch fixed in the drum. When the wire rope is released closed to the last three circles, the anti-over-release device will send alarm signal, and the electronic control system will automatically cut off the hook block falling operation and send alarm signal through buzzer and display.

Installing Mode/Operation

Mode Switch Under installing mode, the anti-over-winding device, boom caging device and moment limiter are inactivated in order for crane assembling. Under operating mode, all the safety devices play their respective roles.

Caging Device of Boom When the elevation angle of boom is more than 81°, the micro-motion switch at the bottom of boom will be actuated to have the buzzer send an alarm and the boom automatically stopped through electronic and

Page 6: SuperstructureHydraulic+Crawler+Crane.pdf · 2009-05-04 · Main hoisting mechanism Rated line pull 13.5t Diameter of drum 580mm Speed of the outermost working layer of wire rope

SCC2000 HYDRAULIC CRAWLER CRANE

TO BE AN UPRIGHT PERSON FIRST BEFORE DOING THINGS.

QUALITY CHANGES THE WORLD

6

hydraulic control. Meanwhile, the hoisting operation of luffing drum is inactivated, but the lowering operation of luffing drum can be achieved. When the boom lowering angle is less than 30°, the operation will be limited. This protection function is automatically controlled by moment limiter..

Anti-back-tipping Device of

Boom The anti-back-tipping rod, located at the bottom of boom is constituted by two steel pipes and equipped with spring at its bottom.

Swing Locking Device The swing mechanism is locked by hydraulically-controlled power pin, which can lock the crane at the front, rear, left and right positions (4 positions).

Drum Locking Device All drums are equipped with locking device controlled by hydraulic oil cylinder. When luffing handle is actuated, the hydraulic oil cylinder will open the luffing drum locking device, but the main drum locking device can be opened only by pressing the switch on the auxiliary control box.

Boom Angle Indicator It is pendulum-type angle indicating device, which is fixed at one side of boom base.

Hook Block Clamp

Each kind of hook block is equipped with baffle to prevent wire rope from falling off.

Swing Alarm

Mounted on the counterweight, it flashes to give an alarm.

Relief Switch

The switch shall be pressed to inactivate all handles so as to prevent against mis-operation resulting from body collision in the event of climbing up/down the crane.

Electronic Monitor

It is used to display water temperature, fuel capacity, accumulated operating time, current time, oil pressure, engine rotation speed, battery charging status and voltage. In addition, it can give the main/auxiliary winch over-winging alarm, and main boom caging alarm. In the case of alarm occurrence, the alarm light will be on and the buzzer will give a sound.

Rear View Mirror

It is mounted in the front of the cab.

Page 7: SuperstructureHydraulic+Crawler+Crane.pdf · 2009-05-04 · Main hoisting mechanism Rated line pull 13.5t Diameter of drum 580mm Speed of the outermost working layer of wire rope

SCC2000 HYDRAULIC CRAWLER CRANE

TO BE AN UPRIGHT PERSON FIRST BEFORE DOING THINGS.

QUALITY CHANGES THE WORLD

7

Dimension

Page 8: SuperstructureHydraulic+Crawler+Crane.pdf · 2009-05-04 · Main hoisting mechanism Rated line pull 13.5t Diameter of drum 580mm Speed of the outermost working layer of wire rope

SCC2000 HYDRAULIC CRAWLER CRANE

TO BE AN UPRIGHT PERSON FIRST BEFORE DOING THINGS.

QUALITY CHANGES THE WORLD

8

Transportation Dimension of Main Parts

Main body ×1 Length 12.155m Width 3.417m Height 3.665m Weight 45 t

Crawler assembly ×2 Length 8.888m Width 1.415m Height 1.340m Weight 23.1 t

Boom tip ×1 Length 9.259m Width 2.225m Height 2.455m Weight 3.5 t

Boom base ×1 Length 8.551m Width 2.230m Height 2.267m Weight 4.7 t

3m boom ×1 Length 3.135m Width 2.230m Height 2.215m Weight 0.8 t

6m boom ×1 Length 6.135m Width 2.230m Height 2.215m Weight 1.3 t

12m boom ×5 Length 12.135m Width 2.230m Height 2.215m Weight 2.2 t

Page 9: SuperstructureHydraulic+Crawler+Crane.pdf · 2009-05-04 · Main hoisting mechanism Rated line pull 13.5t Diameter of drum 580mm Speed of the outermost working layer of wire rope

SCC2000 HYDRAULIC CRAWLER CRANE

TO BE AN UPRIGHT PERSON FIRST BEFORE DOING THINGS.

QUALITY CHANGES THE WORLD

9

Boom extension (optional) ×1 Length 0.857m Width 0.285m Height 0.988m Weight 0.3 t 6.5m luffing jib tip ×1 Length 7.02m Width 1.50m Height 1.41m Weight 1.1 t 3m jib ×1 Length 3.11m Width 1.50m Height 1.31m Weight 0.3 t 6m jib ×2 Length 6.11m Width 1.50m Height 1.31m Weight 0.6 t 12m jib ×2 Length 12.11m Width 1.50m Height 1.31m Weight 1 t 3.2m transitional insert ×1 Length 3.335m Width 2.225m Height 2.789m Weight 1.1t 5m fixed jib base (optional) ×1 Length 5.184m Width 1.024m Height 0.843m Weight 0.3 t

Page 10: SuperstructureHydraulic+Crawler+Crane.pdf · 2009-05-04 · Main hoisting mechanism Rated line pull 13.5t Diameter of drum 580mm Speed of the outermost working layer of wire rope

SCC2000 HYDRAULIC CRAWLER CRANE

TO BE AN UPRIGHT PERSON FIRST BEFORE DOING THINGS.

QUALITY CHANGES THE WORLD

10

5m fixed jib base (optional) ×1 Length 5.474m Width 1.014m Height 0.843m Weight 0.4 t 3m fixed jib insert (optional) ×1 Length 3.078m Width 1.024m Height 0.843m Weight 0.2 t 6m fixed jib insert(optional) ×3 Length 6.078m Width 1.024m Height 0.843m Weight 0.3 t Tower combination ×1 Length 11.625m Width 1.796m Height 3.182m Weight 6.4t Counterweight pallet ×1 Length 4.400m Width 1.860m Height 0.820m

重量 Weight 12.2 t Counterweight block ×10 Length 1.250m Width 1.860m Height 0.522m Weight 6.8 t Lower structure counterweight ×10 Length 1.750m Width 1.441m Height 0.965m Weight 12.4t

Page 11: SuperstructureHydraulic+Crawler+Crane.pdf · 2009-05-04 · Main hoisting mechanism Rated line pull 13.5t Diameter of drum 580mm Speed of the outermost working layer of wire rope

SCC2000 HYDRAULIC CRAWLER CRANE

TO BE AN UPRIGHT PERSON FIRST BEFORE DOING THINGS.

QUALITY CHANGES THE WORLD

11

200t hook block ×1 Length 1.156m Width 0.890m Height 2.279m Weight 3.3 t 150t hook block(optional) ×1 Length 0.882m Width 0.900m Height 3.005m Weight 3.1 t 100t hook block(optional) ×1 Length 0.603m Width 0.900m Height 2.177m Weight 1.7 t 80t hook block ×1 Length 0.568m Width 0.900m Height 2.129m Weight 1.5 t 35t hook block ×1 Length 0.486m Width 0.900m Height 1.907m Weight 1.2 t 13.5t hook block ×1 Length 0.467m Width 0.467m Height 0.932m Weight 0.5 t

Notes:

① The transportation clearance of the parts is a

schematic plan, and is not plotted in proportion.

Page 12: SuperstructureHydraulic+Crawler+Crane.pdf · 2009-05-04 · Main hoisting mechanism Rated line pull 13.5t Diameter of drum 580mm Speed of the outermost working layer of wire rope

SCC2000 HYDRAULIC CRAWLER CRANE

TO BE AN UPRIGHT PERSON FIRST BEFORE DOING THINGS.

QUALITY CHANGES THE WORLD

12

The marked dimensions are of design value and

do not include the packaging. ② The weight is the design value, and may differ slightly due to manufacturing errors.

Page 13: SuperstructureHydraulic+Crawler+Crane.pdf · 2009-05-04 · Main hoisting mechanism Rated line pull 13.5t Diameter of drum 580mm Speed of the outermost working layer of wire rope

SCC2000 HYDRAULIC CRAWLER CRANE

TO BE AN UPRIGHT PERSON FIRST BEFORE DOING THINGS.

QUALITY CHANGES THE WORLD

13

Crane Self–Assembly and Disassembly The crane features crawler travel mechanism self-assembly/disassembly, upper structure and lower structure counterweight self-assembly/disassembly, and boom self-assembly/disassembly functions. In the case of assembly, support oil cylinder shall be used to firstly assemble the crawler frame, then to select the counterweight blocks and then to assemble the boom base, and finally the lifting oil cylinder shall be used to assemble counterweight blocks. Disassembly shall be executed in reverse procedure. Concrete assembly procedure is illustrated in the following figures.

Crawler Frame and Counterweight Self-assembly Schematic (Disassembly executed in reverse procedure)

Counterweight block selection

Crawler frame assembly

Boom base assembly Counterweight assembly

Page 14: SuperstructureHydraulic+Crawler+Crane.pdf · 2009-05-04 · Main hoisting mechanism Rated line pull 13.5t Diameter of drum 580mm Speed of the outermost working layer of wire rope

SCC2000 HYDRAULIC CRAWLER CRANE

TO BE AN UPRIGHT PERSON FIRST BEFORE DOING THINGS.

QUALITY CHANGES THE WORLD

14

Luffing Jib Assembly and Disassembly Schematic

Page 15: SuperstructureHydraulic+Crawler+Crane.pdf · 2009-05-04 · Main hoisting mechanism Rated line pull 13.5t Diameter of drum 580mm Speed of the outermost working layer of wire rope

SCC2000 HYDRAULIC CRAWLER CRANE

TO BE AN UPRIGHT PERSON FIRST BEFORE DOING THINGS.

QUALITY CHANGES THE WORLD

15

Main Boom Combination

Boom Insert Boom Length (m) 3 m 6 m 12m

16.5 - - -

19.5 1 - -

22.5 - 1 -

25.5 1 1 -

28.5 - - 1

31.5 1 - 1

34.5 - 1 1 37.5 1 1 1

40.5 - - 2

43.5 1 - 2

46.5 - 1 2

49.5 1 1 2

52.5 - - 3

55.5 1 - 3

58.5 - 1 3 61.5 1 1 3

64.5 - - 4

67.5 1 - 4

70.5 - 1 4 73.5 1 1 4

76.5 - - 5

79.5 1 - 5

82.5 - 1 5 85.5 1 1 5

Page 16: SuperstructureHydraulic+Crawler+Crane.pdf · 2009-05-04 · Main hoisting mechanism Rated line pull 13.5t Diameter of drum 580mm Speed of the outermost working layer of wire rope

SCC2000 HYDRAULIC CRAWLER CRANE

TO BE AN UPRIGHT PERSON FIRST BEFORE DOING THINGS.

QUALITY CHANGES THE WORLD

16

Main Boom Operating Range H

oist

ing

heig

ht (m

)

Operating range (m)

Page 17: SuperstructureHydraulic+Crawler+Crane.pdf · 2009-05-04 · Main hoisting mechanism Rated line pull 13.5t Diameter of drum 580mm Speed of the outermost working layer of wire rope

SCC2000 HYDRAULIC CRAWLER CRANE

TO BE AN UPRIGHT PERSON FIRST BEFORE DOING THINGS.

QUALITY CHANGES THE WORLD

17

Main Boom Load Chart

Boom Length (m)

16.5 19.5 22.5 25.5 28.5 31.5 34.5 37.5 40.5 43.5 46.5 49.5

4 210.0/4.8 186.0/4.9

5 200.0 185.7 165.1/5.4 151.6/5.8

6 159.3 156.0 152.6 148.4 136.2/6.3 126.5/6.8

7 137.0 134.1 131.2 128.3 126.0 124.3 119.3/7.3 111.7/7.7

8 120.8 118.3 115.8 112.3 111.1 111.1 109.5 109.4 105.6/8.2 93.9/8.7

9 104.3 104.3 103.0 100.7 98.7 97.9 97.7 97.5 95.9 93.2 89.6/9.1 82.8/9.6

10 92.1 92.1 92.1 90.1 89.1 88.2 88.0 87.8 85.6 83.3 81.2 79.2

12 74.5 74.5 74.5 74.5 73.7 73.7 73.4 71.9 70.1 68.5 66.9 65.5

14 62.0 62.0 62.0 62.0 61.3 61.3 61.3 60.5 59.2 57.9 56.6 55.4

16 53.0/15.9 52.7 52.7 52.7 52.1 52.1 51.9 51.9 51.0 49.9 48.8 48.0

18 45.1 45.1 45.1 44.6 44.6 44.3 44.3 44.0 43.7 42.8 42.1

20 43.8/18.5 40.5 39.8 39.0 38.7 38.4 38.4 38.1 37.8 37.7 37.3

22 36.7/21.1 35.2 34.4 34.1 33.8 33.8 33.5 33.3 33.0 32.8

24 32.3/23.7 30.7 30.4 30.0 30.0 29.7 29.5 29.2 29.1

26 28.0 27.4 27.0 27.0 26.7 26.4 26.1 26.0

28 27.6/26.3 25.0 24.5 24.4 24.1 23.8 23.6 23.4

30 24.0/28.9 22.3 22.3 21.9 21.6 21.4 21.2

32 21.1/31.5 20.3 20.1 19.7 19.4 19.4

34 19.0 18.4 18.1 17.9 17.7

36 18.9/34.1 17.1 16.7 16.5 16.3

38 16.7/36.7 15.5 15.1 15.0

40 14.8/39.3 14.1 13.9

42 13.3/41.9 12.9

44 12.1

46 11.9/44.5

48

50

52

54

56

58

60

62

64

66

68

Ope

ratin

g ra

dius(

m)

70

Page 18: SuperstructureHydraulic+Crawler+Crane.pdf · 2009-05-04 · Main hoisting mechanism Rated line pull 13.5t Diameter of drum 580mm Speed of the outermost working layer of wire rope

SCC2000 HYDRAULIC CRAWLER CRANE

TO BE AN UPRIGHT PERSON FIRST BEFORE DOING THINGS.

QUALITY CHANGES THE WORLD

18

Note: 1. The unit of load shown in the table is ton. 2. The rated hoisting capacity shown in the table is the weight hoisted on flat and hard ground surface. 3. The actual hoisting capacity is the value of rated hoisting capacity deducting the weight of hook blocks and all the

other hoisting implements.

Page 19: SuperstructureHydraulic+Crawler+Crane.pdf · 2009-05-04 · Main hoisting mechanism Rated line pull 13.5t Diameter of drum 580mm Speed of the outermost working layer of wire rope

SCC2000 HYDRAULIC CRAWLER CRANE

TO BE AN UPRIGHT PERSON FIRST BEFORE DOING THINGS.

QUALITY CHANGES THE WORLD

19

Boom

Length

(m)

52.5 55.5 58.5 61.5 64.5 67.5 70.5 73.5 76.5 79.5 82.5 85.5

10 76.5/10.1 71.4/10.6 67.2/11.0 62.8/11.5 59.0/11.9

12 63.8 62.5 61.0 59.8 58.4 55.4/12.4 52.2/12.9 49.6/13.3 46.8/13.8

14 54.2 53.2 51.9 51.0 49.8 48.8 47.8 46.8 45.9 44.1/14.3 41.7/14.8 39.8/15.2

16 46.8 45.9 44.9 44.2 43.2 42.3 41.5 40.7 40.0 39.2 38.3 37.5

18 41.1 40.3 39.4 38.8 37.9 37.1 36.4 35.8 35.1 34.4 33.6 33.0

20 36.4 35.7 34.9 34.4 33.7 32.9 32.4 31.8 31.2 30.5 29.8 29.2

22 32.6 32.0 31.2 30.8 30.1 29.5 29.0 28.3 27.9 27.3 26.6 26.0

24 28.8 28.6 28.2 27.8 27.1 26.5 26.0 25.5 25.1 24.5 23.8 23.4

26 25.7 25.5 25.3 25.2 24.6 24.0 23.5 23.1 22.7 22.1 21.6 21.1

28 23.1 23.0 22.6 22.6 22.3 21.8 21.4 20.9 20.6 20.1 19.5 19.1

30 20.9 20.8 20.4 20.3 20.1 19.8 19.5 19.1 18.7 18.3 17.8 17.3

32 19.0 18.8 18.5 18.5 18.1 17.9 17.7 17.5 17.2 16.6 16.2 15.8

34 17.3 17.2 16.8 16.8 16.5 16.2 16.0 15.8 15.7 15.2 14.8 14.4

36 15.9 15.8 15.4 15.3 15.0 14.8 14.6 14.4 14.3 14.0 13.5 13.1

38 14.7 14.4 14.2 14.1 13.7 13.5 13.3 13.1 12.9 12.8 12.3 12.1

40 13.6 13.4 13.0 12.9 12.6 12.3 12.1 12.0 11.8 11.6 11.3 11.0

42 12.6 12.3 12.0 11.9 11.6 11.4 11.1 11.0 10.8 10.6 10.2 10.0

44 11.6 11.4 11.1 11.0 10.6 10.4 10.2 10.0 9.9 9.6 9.3 9.2

46 10.8 10.6 10.3 10.2 9.9 9.6 9.4 9.2 9.1 8.8 8.4 8.3

48 10.5/47.1 9.9 9.5 9.4 9.1 8.8 8.6 8.4 8.3 8.0 7.7 7.6

50 9.4/49.7 8.9 8.7 8.4 8.2 7.9 7.7 7.6 7.3 7.0 6.9

52 8.4 8.1 7.8 7.6 7.3 7.1 7.0 6.7 6.3 6.2

54 8.3/52.3 7.6 7.2 7.0 6.7 6.5 6.3 6.1 5.8 5.6

56 7.4/54.9 6.7 6.4 6.2 6.0 5.8 5.5 5.3 5.1

58 6.4/57.5 6.0 5.7 5.5 5.3 5.0 4.8 4.6

60 5.5/60.0 5.3 5.1 4.8 4.6 4.3 4.1

62 4.8 4.7 4.4 4.1 3.9 3.7

64 4.7/62.7 4.2 4.0 3.8 3.4 3.3

66 4.0/65.3 3.6 3.3 3.1 2.9

68 3.3/67.9 3.1 2.7 2.6

70 2.7 2.4 2.2

72 2.7/70.5 2.1 1.9

74 1.9/73.1 1.7

76 1.4/75.7

78

Wor

king

Rad

ius(

m)

80

Page 20: SuperstructureHydraulic+Crawler+Crane.pdf · 2009-05-04 · Main hoisting mechanism Rated line pull 13.5t Diameter of drum 580mm Speed of the outermost working layer of wire rope

SCC2000 HYDRAULIC CRAWLER CRANE

TO BE AN UPRIGHT PERSON FIRST BEFORE DOING THINGS.

QUALITY CHANGES THE WORLD

20

Note: 1. The unit of load shown in the table is ton. 2. The rated hoisting capacity shown in the table is the weight hoisted on flat and hard ground surface. 3. The actual hoisting capacity is the value of rated hoisting capacity deducting the weight of hook blocks and all the

other hoisting implements.

Page 21: SuperstructureHydraulic+Crawler+Crane.pdf · 2009-05-04 · Main hoisting mechanism Rated line pull 13.5t Diameter of drum 580mm Speed of the outermost working layer of wire rope

SCC2000 HYDRAULIC CRAWLER CRANE

TO BE AN UPRIGHT PERSON FIRST BEFORE DOING THINGS.

QUALITY CHANGES THE WORLD

21

Fixed Jib Operating Range

Main boom operating range: 40.5m~73.5m, jib operating range: 13m~31m

Notes: The short jib of fixed jib operates, and boom luffing ranges from 30° to 80°, as detailed in the load table.

Operating range (m)

Page 22: SuperstructureHydraulic+Crawler+Crane.pdf · 2009-05-04 · Main hoisting mechanism Rated line pull 13.5t Diameter of drum 580mm Speed of the outermost working layer of wire rope

SCC2000 HYDRAULIC CRAWLER CRANE

TO BE AN UPRIGHT PERSON FIRST BEFORE DOING THINGS.

QUALITY CHANGES THE WORLD

22

Fixed Jib Combination

Jib Insert

Jib Length(m) 3 m 6 m

Main Boom Length (m)

Included angle between main boom and jib

13 1 - 40.5~73.5 10°,30° 19 1 1 40.5~73.5 10°,30° 25 1 2 40.5~73.5 10°,30° 31 1 3 40.5~73.5 10°,30°

Fixed Jib Combination(13m, 19m, 25m, 31m)

Page 23: SuperstructureHydraulic+Crawler+Crane.pdf · 2009-05-04 · Main hoisting mechanism Rated line pull 13.5t Diameter of drum 580mm Speed of the outermost working layer of wire rope

SCC2000 HYDRAULIC CRAWLER CRANE

TO BE AN UPRIGHT PERSON FIRST BEFORE DOING THINGS.

QUALITY CHANGES THE WORLD

23

Fixed Jib Load Chart

Jib offset angle:10°

Boom Length 40.5m

Jib Length 13m 19m 25m 31m

12m 12.2m/24.1

14m 23.2 14.2m/19.4

16m 22.3 18.5 16.2m/11.0

18m 21.5 17.7 10.6 18.1m/7.0

20m 20.7 17.0 10.2 5.9

22m 20.0 16.3 9.9 5.7

24m 19.3 15.7 9.5 5.4

26m 18.7 15.2 9.2 5.2

28m 18.0 14.7 8.9 4.9

30m 17.4 14.3 8.6 4.8

32m 16.8 13.6 8.3 4.6

34m 16.2 12.9 8.0 4.4

36m 15.5 12.2 7.8 4.3

38m 15.0 11.7 7.5 4.1

40m 14.5 11.1 7.4 3.9

42m 13.9 10.6 7.1 3.9

44m 13.4 10.2 6.9 3.7

46m 12.7 9.8 6.7 3.6

48m 47.7m/11.9 9.4 6.6 3.4

50m 9.2 6.5 3.3

52m 8.8 6.3 3.2

54m 53.4m/8.6 6.2 3.1

56m 6.0 3.1

58m 5.9 3.0

60m 59.4m/5.8 2.9

62m 2.8

64m 2.7

66m 65.2m/2.7

68m

70m

72m

74m

Ope

ratin

g R

adiu

s

76m

Jib offset angle:10°

Boom Length 52.5m

Jib Length 13m 19m 25m 31m

14m 14.1m/24.1

16m 23.2 16.1m/19.4

18m 22.5 18.6 18.0m/11.0

20m 21.9 17.9 10.7 20.0m/6.2

22m 21.1 17.3 10.3 5.9

24m 20.5 16.7 10.0 5.7

26m 19.8 16.2 9.7 5.5

28m 19.3 15.7 9.4 5.3

30m 18.8 15.3 9.2 5.1

32m 18.2 14.9 8.9 4.9

34m 17.7 14.5 8.6 4.8

36m 17.2 14.1 8.3 4.6

38m 15.9 13.6 8.2 4.5

40m 14.7 12.9 7.9 4.3

42m 13.6 12.4 7.7 4.2

44m 12.7 11.8 7.5 4.0

46m 11.8 11.4 7.4 3.9

48m 11.0 11.0 7.2 3.8

50m 10.2 10.6 7.0 3.7

52m 9.6 10.0 6.8 3.6

54m 9.0 9.3 6.7 3.5

56m 8.4 8.8 6.6 3.4

58m 7.9 8.3 6.5 3.3

60m 58.3m/7.8 7.7 6.4 3.2

62m 7.3 6.2 3.1

64m 64.0m/7.0 6.1 3.1

66m 6.0 3.0

68m 5.9 2.9

70m 70.0m/5.8 2.9

72m 2.8

74m 2.7

76m 75.7m/2.7

Ope

ratin

g R

adiu

s

78m

Page 24: SuperstructureHydraulic+Crawler+Crane.pdf · 2009-05-04 · Main hoisting mechanism Rated line pull 13.5t Diameter of drum 580mm Speed of the outermost working layer of wire rope

SCC2000 HYDRAULIC CRAWLER CRANE

TO BE AN UPRIGHT PERSON FIRST BEFORE DOING THINGS.

QUALITY CHANGES THE WORLD

24

Jib Deflection Angle:10°

Boom Length 61.5m

Jib Length 13m 19m 25m 31m

14m 15.5m/24.1

16m 23.9 17.5m/19.4

18m 23.2 19.0 19.4m/11.0

20m 22.5 18.5 11.0 21.4m/6.2

22m 22.0 17.9 10.6 6.1

24m 21.3 17.3 10.3 5.8

26m 20.7 16.9 10.0 5.7

28m 20.2 16.3 9.8 5.5

30m 19.7 15.9 9.5 5.3

32m 19.1 15.5 9.2 5.1

34m 18.0 15.1 9.0 4.9

36m 16.5 14.7 8.8 4.8

38m 15.2 14.5 8.5 4.7

40m 14.0 14.1 8.3 4.6

42m 12.9 13.3 8.2 4.4

44m 11.9 12.4 7.9 4.3

46m 11.0 11.5 7.7 4.1

48m 10.2 10.7 7.5 4.0

50m 9.5 10.0 7.5 3.9

52m 8.9 9.2 7.3 3.9

54m 8.3 8.6 7.1 3.8

56m 7.7 8.1 7.0 3.6

58m 7.2 7.5 6.8 3.5

60m 6.6 7.0 6.7 3.4

62m 6.2 6.6 6.6 3.3

64m 5.8 6.1 6.5 3.2

66m 5.4 5.7 6.2 3.2

68m 66.2m/5.4 5.4 5.8 3.1

70m 5.0 5.4 3.1

72m 71.9m/4.7 5.1 3.0

74m 4.8 3.0

76m 4.5 2.9

78m 77.9m/4.2 2.8

80m 2.8

82m 2.7

Ope

ratin

g R

adiu

s

84m 83.6m/2.7

Jib Deflection Angle:10°

Boom Length 73.5m

Jib Length 13m 19m 25m 31m 16m 17.4m/24.1

18m 23.9 19.4m/19.4

20m 23.2 19.0 21.3m/11.0

22m 22.7 18.5 10.9 23.3m/6.1

24m 22.2 18.0 10.6 6.1

26m 21.7 17.5 10.3 5.8

28m 21.3 17.1 10.1 5.7

30m 20.3 16.6 9.9 5.6

32m 18.4 16.2 9.6 5.4

34m 17.0 15.9 9.4 5.2

36m 15.5 15.5 9.2 5.0

38m 14.2 14.6 9.0 4.9

40m 13.0 13.5 8.8 4.8

42m 11.9 12.4 8.6 4.7

44m 11.0 11.4 8.4 4.6

46m 10.1 10.5 8.3 4.4

48m 9.2 9.7 8.1 4.3

50m 8.5 9.0 7.9 4.2

52m 7.9 8.3 7.7 4.1

54m 7.3 7.6 7.5 4.0

56m 6.6 7.1 7.5 3.9

58m 6.2 6.6 7.0 3.8

60m 5.7 6.0 6.6 3.7

62m 5.2 5.6 6.1 3.6

64m 4.8 5.1 5.7 3.6

66m 4.4 4.8 5.2 3.5

68m 4.0 4.4 4.8 3.4

70m 3.7 4.0 4.5 3.3

72m 3.3 3.7 4.1 3.2

74m 3.1 3.3 3.9 3.1

76m 2.7 3.1 3.5 3.1

78m 76.7m/2.6 2.8 3.2 3.1

80m 2.5 3.0 3.0

82m 2.2 2.7 3.0

84m 82.4m/1.9 2.4 2.7

86m 2.2 2.4

88m 2.0 2.2

90m 88.5m/1.9 1.9

92m 1.6

94m 1.4

Ope

ratin

g R

adiu

s

96m 94.2m/1.4

Page 25: SuperstructureHydraulic+Crawler+Crane.pdf · 2009-05-04 · Main hoisting mechanism Rated line pull 13.5t Diameter of drum 580mm Speed of the outermost working layer of wire rope

SCC2000 HYDRAULIC CRAWLER CRANE

TO BE AN UPRIGHT PERSON FIRST BEFORE DOING THINGS.

QUALITY CHANGES THE WORLD

25

Jib Deflection Angle:30°

Boom Length 40.5m

Jib length 13m 19m 25m 31m

12m

14m

16m 16.2m/17.4

18m 16.9

20m 16.5 20.0m/12.1

22m 15.7 12.1 23.3m/7.4

24m 15.1 11.8 7.3

26m 14.5 11.7 7.1 27.5m/3.8

28m 13.9 11.2 6.9 3.7

30m 13.4 10.8 6.7 3.6

32m 13.0 10.4 6.6 3.4

34m 12.6 10.0 6.5 3.3

36m 12.2 9.7 6.3 3.2

38m 11.9 9.3 6.1 3.1

40m 11.7 9.1 6.0 3.1

42m 11.5 8.9 5.9 3.0

44m 11.3 8.6 5.8 2.9

46m 11.1 8.4 5.7 2.8

48m 11.1 8.3 5.7 2.8

50m 48.4m/11.1 8.2 5.6 2.7

52m 8.1 5.5 2.6

54m 8.0 5.5 2.6

56m 54.8m/8.0 5.5 2.5

58m 5.5 2.5

60m 5.5 2.4

62m 60.9m/5.5 2.4

64m 2.4

66m 2.4

68m 67.0m/2.4

70m

72m

74m

Ope

ratin

g R

adiu

s

76m

Jib Deflection Angle:30°

Boom Length 52.5m

Jib length 13m 19m 25m 31m

16m 18m 18.1m/17.4

20m 17.0 21.8m/12.1

22m 16.6 12.1

24m 16.2 12.1 25.6m/7.4

26m 15.5 11.9 7.3

28m 15.0 11.8 7.1 29.4m/3.8

30m 14.5 11.6 7.0 3.7

32m 14.1 11.1 6.8 3.6

34m 13.6 10.8 6.6 3.5

36m 13.3 10.5 6.6 3.4

38m 12.9 10.1 6.4 3.3

40m 12.7 9.9 6.3 3.2

42m 12.3 9.6 6.2 3.1

44m 12.1 9.3 6.1 3.1

46m 11.8 9.2 6.0 3.0

48m 11.2 9.0 5.9 2.9

50m 10.5 8.7 5.8 2.9

52m 9.8 8.5 5.7 2.8

54m 9.2 8.4 5.7 2.7

56m 8.5 8.3 5.6 2.7

58m 8.0 8.2 5.6 2.6

60m 59.0m/7.7 8.1 5.5 2.6

62m 7.5 5.5 2.5

64m 7.1 5.4 2.5

66m 65.4m/6.8 5.4 2.5

68m 5.4 2.4

70m 5.4 2.4

72m 71.5m/5.4 2.4

74m 2.4

76m 2.4

78m 77.6m/2.4

Ope

ratin

g R

adiu

s

80m

Page 26: SuperstructureHydraulic+Crawler+Crane.pdf · 2009-05-04 · Main hoisting mechanism Rated line pull 13.5t Diameter of drum 580mm Speed of the outermost working layer of wire rope

SCC2000 HYDRAULIC CRAWLER CRANE

TO BE AN UPRIGHT PERSON FIRST BEFORE DOING THINGS.

QUALITY CHANGES THE WORLD

26

Jib Deflection Angle:30°

Boom Length 61.5m

Jib Length 13m 19m 25m 31m

18m 19.5m/17.4

20m 17.2

22m 16.9 23.3m/12.1

24m 16.6 12.1

26m 16.2 12.1 27.0m/7.4

28m 15.7 11.9 7.3

30m 15.2 11.8 7.1 30.8m/3.7

32m 14.7 11.6 6.9 3.7

34m 14.4 11.3 6.8 3.5

36m 13.9 11.0 6.6 3.4

38m 13.6 10.7 6.6 3.4

40m 13.3 10.3 6.5 3.3

42m 12.9 10.1 6.4 3.2

44m 12.3 9.9 6.3 3.1

46m 11.4 9.6 6.1 3.1

48m 10.6 9.4 6.0 3.0

50m 9.9 9.2 5.9 3.0

52m 9.2 9.0 5.9 2.9

54m 8.5 8.8 5.8 2.8

56m 7.9 8.6 5.7 2.8

58m 7.4 8.0 5.7 2.7

60m 6.8 7.5 5.7 2.7

62m 6.4 7.0 5.6 2.6

64m 5.9 6.6 5.6 2.6

66m 5.5 6.1 5.5 2.5

68m 66.9m/5.3 5.7 5.5 5.2

70m 5.3 5.4 2.5

72m 4.9 5.3 2.4

74m 73.3m/4.6 4.9 2.4

76m 4.6 2.4

78m 4.3 2.4

80m 79.4m/4.1 2.4

82m 2.4

84m 2.4

86m 85.5m/2.4

Ope

ratin

g R

adiu

s

88m

Jib Deflection Angle:30°

Boom Length 73.5m

Jib Length 13m 19m 25m 31m

20m 21.4m/17.3

22m 17.1

24m 16.9 25.1m/12.1

26m 16.7 12.1

28m 16.4 12.1 28.9m/7.4

30m 16.0 12.0 7.2

32m 15.5 11.8 7.1 32.7m/3.7

34m 15.1 11.7 7.0 3.6

36m 14.7 11.5 6.8 3.5

38m 14.4 11.2 6.7 3.5

40m 13.6 11.0 6.6 3.4

42m 12.5 10.7 6.6 3.3

44m 11.5 10.4 6.5 3.2

46m 10.5 10.1 6.4 3.1

48m 9.7 10.0 6.3 3.1

50m 9.0 9.8 6.2 3.1

52m 8.3 9.1 6.1 3.0

54m 7.6 8.3 6.0 3.0

56m 7.0 7.7 5.9 2.9

58m 6.5 7.2 5.8 2.9

60m 5.9 6.6 5.8 2.8

62m 5.5 6.2 5.7 2.8

64m 5.0 5.7 5.7 2.7

66m 4.6 5.2 5.7 2.7

68m 4.2 4.8 5.3 2.6

70m 3.8 3.6 4.9 2.6

72m 3.4 4.0 4.6 2.5

74m 3.1 3.8 4.2 2.5

76m 2.8 3.4 3.9 2.5

78m 77.4m/2.6 3.1 3.5 2.5

80m 2.8 3.2 2.4

82m 2.5 3.0 2.4

84m 83.8m/2.3 2.7 2.4

86m 2.4 2.4

88m 2.2 2.4

90m 89.9m/1.8 2.2

92m 2.1

94m 1.8

Ope

ratin

g R

adiu

s

96m 96.0m/1.5

Page 27: SuperstructureHydraulic+Crawler+Crane.pdf · 2009-05-04 · Main hoisting mechanism Rated line pull 13.5t Diameter of drum 580mm Speed of the outermost working layer of wire rope

SCC2000 HYDRAULIC CRAWLER CRANE

TO BE AN UPRIGHT PERSON FIRST BEFORE DOING THINGS.

QUALITY CHANGES THE WORLD

27

Luffing Jib Operating Range

Hoi

stin

g he

ight

(m)

Operating range (m)

Page 28: SuperstructureHydraulic+Crawler+Crane.pdf · 2009-05-04 · Main hoisting mechanism Rated line pull 13.5t Diameter of drum 580mm Speed of the outermost working layer of wire rope

SCC2000 HYDRAULIC CRAWLER CRANE

TO BE AN UPRIGHT PERSON FIRST BEFORE DOING THINGS.

QUALITY CHANGES THE WORLD

28

Hoi

stin

g he

ight

(m)

Operating range (m)

Page 29: SuperstructureHydraulic+Crawler+Crane.pdf · 2009-05-04 · Main hoisting mechanism Rated line pull 13.5t Diameter of drum 580mm Speed of the outermost working layer of wire rope

SCC2000 HYDRAULIC CRAWLER CRANE

TO BE AN UPRIGHT PERSON FIRST BEFORE DOING THINGS.

QUALITY CHANGES THE WORLD

29

Operating range (m)

Hoi

stin

g he

ight

(m)

Page 30: SuperstructureHydraulic+Crawler+Crane.pdf · 2009-05-04 · Main hoisting mechanism Rated line pull 13.5t Diameter of drum 580mm Speed of the outermost working layer of wire rope

SCC2000 HYDRAULIC CRAWLER CRANE

TO BE AN UPRIGHT PERSON FIRST BEFORE DOING THINGS.

QUALITY CHANGES THE WORLD

30

Hoi

stin

g he

ight

(m)

Operating range (m)

Page 31: SuperstructureHydraulic+Crawler+Crane.pdf · 2009-05-04 · Main hoisting mechanism Rated line pull 13.5t Diameter of drum 580mm Speed of the outermost working layer of wire rope

SCC2000 HYDRAULIC CRAWLER CRANE

TO BE AN UPRIGHT PERSON FIRST BEFORE DOING THINGS.

QUALITY CHANGES THE WORLD

31

Hoi

stin

g he

ight

(m)

Operating range (m)

Page 32: SuperstructureHydraulic+Crawler+Crane.pdf · 2009-05-04 · Main hoisting mechanism Rated line pull 13.5t Diameter of drum 580mm Speed of the outermost working layer of wire rope

SCC2000 HYDRAULIC CRAWLER CRANE

TO BE AN UPRIGHT PERSON FIRST BEFORE DOING THINGS.

QUALITY CHANGES THE WORLD

32

Hoi

stin

g he

ight

(m)

Working range (m)

Page 33: SuperstructureHydraulic+Crawler+Crane.pdf · 2009-05-04 · Main hoisting mechanism Rated line pull 13.5t Diameter of drum 580mm Speed of the outermost working layer of wire rope

SCC2000 HYDRAULIC CRAWLER CRANE

TO BE AN UPRIGHT PERSON FIRST BEFORE DOING THINGS.

QUALITY CHANGES THE WORLD

33

Luffing Jib Combination Jib Insert

Jib Length(m) 3 m 6 m 12m

Main Boom Length(m)

Main Boom Angle

22 1 1 - 37~58 63°~88° 25 - - 1 37~58 63°~88° 28 1 - 1 37~58 63°~88° 31 - 1 1 37~58 63°~88° 34 1 1 1 37~58 63°~88° 37 - - 2 37~58 63°~88° 40 1 - 2 37~58 63°~88° 43 - 1 2 37~58 63°~88° 46 1 1 2 37~58 63°~88° 49 - 2 2 37~58 63°~88° 52 1 2 2 37~58 63°~88°

Page 34: SuperstructureHydraulic+Crawler+Crane.pdf · 2009-05-04 · Main hoisting mechanism Rated line pull 13.5t Diameter of drum 580mm Speed of the outermost working layer of wire rope

SCC2000 HYDRAULIC CRAWLER CRANE

TO BE AN UPRIGHT PERSON FIRST BEFORE DOING THINGS.

QUALITY CHANGES THE WORLD

34

Luffing Jib Load Chart

Main Boom Length 37m

Jib Length 22m 25m 31m 37m 43m 52m

Boom Angle(°) 88 83 88 83 88 83 88 83 88 83 88 83

9m

10m

12m 52.0 44.7

14m 47.1 44.7 44.7 33.9

16m 40.8 41.7 41.5 41.3 41.2 33.9 24.8

18m 34.1 37.2 34.7 36.9 35.0 31.6 23.5 15.1

20m 29.1 33.5 29.7 33.3 29.9 32.0 29.4 21.7 13.9

22m 25.3 30.6 25.8 30.4 26.0 29.1 27.0 28.0 20.2 12.8

24m 20.8 27.6 22.7 27.5 22.9 26.7 23.7 25.7 18.8 20.4 11.9

26m 24.3 11.6 24.7 20.4 24.7 21.1 23.7 17.6 19.1 11.1 12.5

28m 21.7 18.3 22.3 18.9 22.0 16.6 17.8 10.4 11.6

30m 19.3 16.5 19.9 17.1 20.3 15.6 16.8 9.7 10.8

32m 14.8 17.9 15.6 18.3 14.8 15.8 9.1 10.1

34m 16.2 14.2 16.6 14.0 15.0 8.5 9.5

36m 14.6 13.0 15.1 13.0 14.2 8.0 8.9

38m 11.8 13.8 11.9 13.5 7.6 8.4

40m 12.7 11.0 12.9 7.2 7.9

42m 11.6 10.1 11.9 6.9 7.5

44m 9.2 11.0 6.4 7.1

46m 10.2 6.2 6.7

48m 9.4 5.9 6.4

50m 5.6 6.1

52m 5.4 5.8

54m 5.8

56m 5.3

58m

60m

Page 35: SuperstructureHydraulic+Crawler+Crane.pdf · 2009-05-04 · Main hoisting mechanism Rated line pull 13.5t Diameter of drum 580mm Speed of the outermost working layer of wire rope

SCC2000 HYDRAULIC CRAWLER CRANE

TO BE AN UPRIGHT PERSON FIRST BEFORE DOING THINGS.

QUALITY CHANGES THE WORLD

35

Main Boom Length 40m

Jib Length 22m 25m 31m 37m 43m 52m

Boom Angle(°) 88 83 88 83 88 83 88 83 88 83 88 83

9m

10m

12m 44.7 44.7

14m 44.7 44.7 44.7

16m 41.2 40.6 41.9 40.4 33.9 24.8

18m 34.4 36.3 35.0 36.0 35.2 31.7 23.6

20m 29.3 32.8 29.9 32.5 30.1 31.2 29.4 21.9 13.9

22m 25.3 29.9 25.9 29.7 26.2 28.4 27.0 27.4 20.2 12.9

24m 21.2 27.4 22.8 27.3 23.0 26.1 23.8 25.1 18.9 20.7 12.0

26m 24.8 20.2 24.8 20.5 24.1 21.2 23.2 17.6 19.2 11.1 12.6

28m 20.9 22.5 18.3 22.4 19.0 21.5 16.6 18.1 10.4 11.7

30m 19.9 16.6 20.3 17.1 20.0 15.6 17.0 9.7 11.0

32m 15.0 18.2 15.6 18.7 14.8 16.0 9.1 10.2

34m 16.5 14.2 16.9 14.1 15.1 8.6 9.6

36m 14.9 13.0 15.3 13.0 14.3 8.1 9.0

38m 11.9 14.1 12.0 13.6 7.6 8.4

40m 12.9 11.0 13.0 7.2 8.0

42m 11.8 10.2 12.0 6.9 7.5

44m 9.3 11.1 6.5 7.2

46m 10.3 6.2 6.8

48m 9.5 5.9 6.4

50m 5.6 6.1

52m 5.4 5.9

54m 5.1 5.6

56m 5.4

58m

60m

Page 36: SuperstructureHydraulic+Crawler+Crane.pdf · 2009-05-04 · Main hoisting mechanism Rated line pull 13.5t Diameter of drum 580mm Speed of the outermost working layer of wire rope

SCC2000 HYDRAULIC CRAWLER CRANE

TO BE AN UPRIGHT PERSON FIRST BEFORE DOING THINGS.

QUALITY CHANGES THE WORLD

36

Main Boom Length 43m

Jib Length 22m 25m 31m 37m 43m 52m

Boom Angle(°) 88 83 88 83 88 83 88 83 88 83 88 83

9m

10m

12m 44.7 44.7

14m 44.7 44.7 43.5

16m 41.6 39.6 41.3 39.6 33.4 24.8

18m 34.6 35.3 35.3 35.1 35.5 31.9 23.7

20m 29.5 31.9 30.1 31.7 30.3 30.4 29.5 21.8 14.0

22m 25.5 29.1 26.1 28.9 26.3 27.8 27.2 26.7 20.3 12.9

24m 21.5 26.8 22.9 26.6 23.2 25.4 23.9 24.5 18.9 20.9 12.0

26m 24.6 20.2 24.6 20.6 23.5 21.2 22.6 17.7 19.5 11.1

28m 22.1 22.4 18.4 21.8 19.1 21.0 16.6 18.2 10.4 11.9

30m 20.3 16.6 20.4 17.2 19.6 15.6 17.1 9.7 11.0

32m 15.0 18.6 15.6 18.3 14.8 16.1 9.1 10.4

34m 16.7 14.3 17.1 14.1 15.2 8.6 9.7

36m 15.1 13.0 15.6 13.0 14.5 8.1 9.1

38m 12.0 14.2 12.0 13.7 7.6 8.5

40m 13.0 11.0 13.0 7.2 8.0

42m 12.0 10.2 12.2 6.9 7.6

44m 9.4 11.3 6.5 7.2

46m 10.5 6.2 6.9

48m 9.7 5.9 6.5

50m 5.6 6.2

52m 5.4 5.9

54m 5.1 5.6

56m 5.4

58m

60m

Page 37: SuperstructureHydraulic+Crawler+Crane.pdf · 2009-05-04 · Main hoisting mechanism Rated line pull 13.5t Diameter of drum 580mm Speed of the outermost working layer of wire rope

SCC2000 HYDRAULIC CRAWLER CRANE

TO BE AN UPRIGHT PERSON FIRST BEFORE DOING THINGS.

QUALITY CHANGES THE WORLD

37

Main Boom Length 46m

Jib Length 22m 25m 31m 37m 43m 52m

Boom Angle(°) 88 83 88 83 88 83 88 83 88 83 88 83

9m

10m

12m 44.8 44.7

14m 44.7 44.7 33.9

16m 40.9 38.6 40.6 33.9 32.4 24.8

18m 34.9 34.5 35.5 34.3 33.9 31.9 23.8

20m 29.7 31.1 30.3 31.0 30.5 29.7 29.6 21.9 14.1

22m 25.7 28.4 26.3 28.3 26.4 27.1 27.4 26.1 20.3 13.0

24m 21.7 26.1 23.0 26.0 23.3 24.9 24.1 23.9 19.0 21.2 12.0

26m 24.2 20.3 24.1 20.7 23.0 21.4 22.1 17.7 19.7 11.2

28m 22.2 22.2 18.5 21.3 19.2 20.5 16.6 18.5 10.5 12.0

30m 20.4 16.6 19.9 17.3 19.1 15.7 17.3 9.8 11.2

32m 15.1 18.7 15.7 17.9 14.8 16.3 9.1 10.5

34m 17.0 14.3 16.8 14.1 15.4 8.6 9.8

36m 15.4 13.1 15.8 13.0 14.6 8.1 9.2

38m 12.0 14.5 12.0 13.9 7.6 8.6

40m 13.2 11.0 13.2 7.2 8.1

42m 12.1 10.2 12.4 6.9 7.7

44m 9.5 11.5 6.5 7.3

46m 10.5 6.2 6.9

48m 9.8 5.9 6.5

50m 5.6 6.2

52m 5.4 5.9

54m 5.1 5.6

56m 5.4

58m 5.2

60m

Page 38: SuperstructureHydraulic+Crawler+Crane.pdf · 2009-05-04 · Main hoisting mechanism Rated line pull 13.5t Diameter of drum 580mm Speed of the outermost working layer of wire rope

SCC2000 HYDRAULIC CRAWLER CRANE

TO BE AN UPRIGHT PERSON FIRST BEFORE DOING THINGS.

QUALITY CHANGES THE WORLD

38

Main Boom Length 49m

Jib Length 22m 25m 31m 37m 43m 52m

Boom Angle(°) 88 83 88 83 88 83 88 83 88 83 88 83

10m

12m 44.7 33.9

14m 44.7 33.9 33.9

16m 40.1 33.9 33.9 31.1 24.8

18m 35.1 33.5 33.9 33.4 33.9 30.9 23.8

20m 29.9 30.3 30.5 30.2 30.7 28.9 29.7 22.0 14.1

22m 25.8 27.6 26.3 27.6 26.6 26.4 27.2 25.4 20.4 13.0

24m 22.1 25.4 23.1 25.3 23.3 24.3 24.2 23.3 19.0 21.5 12.0

26m 23.5 20.4 23.5 20.7 22.4 21.5 21.5 17.8 20.0 11.2

28m 22.0 21.8 18.6 20.9 19.2 20.0 16.7 18.7 10.5 12.2

30m 20.2 16.6 19.4 17.4 18.6 15.7 17.5 9.8 11.4

32m 18.4 15.1 18.2 15.7 17.4 14.9 16.5 9.2 10.5

34m 17.1 14.4 16.3 14.1 15.6 8.6 9.9

36m 15.9 13.1 15.4 13.0 14.6 8.1 9.3

38m 14.1 12.0 14.6 12.0 13.8 7.7 8.7

40m 13.4 11.0 13.0 7.2 8.2

42m 12.3 10.2 12.4 6.9 7.8

44m 9.5 11.6 6.5 7.4

46m 10.7 6.2 6.9

48m 9.9 5.9 6.6

50m 5.6 6.3

52m 5.4 5.9

54m 6.2 5.7

56m 5.4

58m 5.2

60m

62m

Page 39: SuperstructureHydraulic+Crawler+Crane.pdf · 2009-05-04 · Main hoisting mechanism Rated line pull 13.5t Diameter of drum 580mm Speed of the outermost working layer of wire rope

SCC2000 HYDRAULIC CRAWLER CRANE

TO BE AN UPRIGHT PERSON FIRST BEFORE DOING THINGS.

QUALITY CHANGES THE WORLD

39

Main Boom Length 52m

Jib Length 22m 25m 31m 37m 43m 52m

Boom Angle(°) 88 83 88 83 88 83 88 83 88 83 88 83

10m

12m 33.9

14m 33.9 33.9 33.9

16m 33.9 33.9 33.9 30.0

18m 33.9 32.6 33.9 32.5 33.5 29.6 22.4

20m 30.4 29.4 30.7 29.4 30.4 28.3 29.2 22.1 14.1

22m 26.2 26.9 26.5 26.9 27.2 25.8 26.7 20.5 13.0

24m 22.6 24.8 23.3 24.8 23.8 23.7 24.3 22.8 19.1 12.0

26m 22.9 20.5 22.9 21.3 21.8 21.6 21.0 17.8 20.2 11.2

28m 21.3 16.8 21.3 18.9 20.2 19.3 19.5 16.7 18.9 10.5 12.4

30m 20.0 17.0 18.9 17.4 18.1 15.7 17.7 9.8 11.5

32m 18.5 15.4 17.7 15.8 17.0 14.9 16.6 9.2 10.7

34m 16.7 14.4 15.9 14.1 15.7 8.6 10.0

36m 15.8 13.2 15.0 13.1 14.9 8.1 9.4

38m 14.6 12.1 14.2 12.0 14.1 7.7 8.8

40m 13.5 11.1 13.4 7.3 8.3

42m 12.5 10.2 12.7 6.9 7.9

44m 11.5 9.5 11.7 6.5 7.4

46m 10.9 6.2 7.0

48m 10.0 5.9 6.6

50m 9.3 5.6 6.3

52m 5.4 6.0

54m 5.1 5.7

56m 5.4

58m 5.2

60m

62m

Page 40: SuperstructureHydraulic+Crawler+Crane.pdf · 2009-05-04 · Main hoisting mechanism Rated line pull 13.5t Diameter of drum 580mm Speed of the outermost working layer of wire rope

SCC2000 HYDRAULIC CRAWLER CRANE

TO BE AN UPRIGHT PERSON FIRST BEFORE DOING THINGS.

QUALITY CHANGES THE WORLD

40

Main Boom Length 55m

Jib Length 22m 25m 31m 37m 43m 52m

Boom Angle(°) 88 83 88 83 88 83 88 83 88 83 88 83

10m

12m 33.9

14m 33.9 33.9 33.9

16m 33.9 33.6 33.2 26.9

18m 31.2 31.6 30.7 30.3 26.4 22.4

20m 28.8 28.6 28.3 28.7 27.9 25.8 22.2 14.1

22m 26.3 26.1 26.2 26.2 25.8 25.0 25.1 20.5 13.0

24m 22.9 24.0 23.7 24.1 23.9 23.0 23.3 22.1 19.1 12.1

26m 22.2 20.9 22.2 21.2 21.2 21.7 20.4 17.9 20.3 11.2

28m 20.7 17.3 20.7 19.0 19.7 19.4 18.9 16.7 18.9 10.5 12.5

30m 19.5 19.4 17.1 18.4 17.5 17.6 15.8 17.6 9.8 11.6

32m 18.3 15.4 17.2 15.9 16.5 14.9 16.5 9.2 10.8

34m 13.0 16.2 14.5 15.5 14.1 15.5 8.6 10.1

36m 15.4 13.2 14.6 13.1 14.6 8.1 9.5

38m 14.6 12.1 13.8 12.0 13.8 7.7 8.9

40m 13.0 11.1 13.0 7.3 8.4

42m 12.5 10.3 12.4 6.9 7.9

44m 11.6 9.5 11.8 6.5 7.4

46m 11.0 6.2 7.0

48m 10.2 5.9 6.7

50m 9.4 5.6 6.4

52m 5.4 6.0

54m 5.1 5.8

56m 5.4

58m 5.3

60m

62m

Page 41: SuperstructureHydraulic+Crawler+Crane.pdf · 2009-05-04 · Main hoisting mechanism Rated line pull 13.5t Diameter of drum 580mm Speed of the outermost working layer of wire rope

SCC2000 HYDRAULIC CRAWLER CRANE

TO BE AN UPRIGHT PERSON FIRST BEFORE DOING THINGS.

QUALITY CHANGES THE WORLD

41

Main Boom Length 58m

Jib Length 22m 25m 31m 37m 43m 52m

Boom Angle(°) 88 83 88 83 88 83 88 83 88 83 88 83

10m

12m

14m 33.0 32.8 31.8

16m 29.9 29.6 28.8 22.4 22.1

18m 27.3 30.8 27.0 26.3 22.4 21.7

20m 25.1 27.9 24.8 27.9 24.1 22.4 20.6 14.2

22m 23.3 25.4 23.0 25.5 22.2 24.4 22.0 19.2 13.1

24m 21.9 23.4 21.4 23.5 20.7 22.4 20.4 14.1 17.9 19.9 12.1

26m 21.7 20.2 21.7 19.4 20.7 19.1 12.4 16.8 18.5 11.3

28m 20.2 17.6 20.2 18.2 19.2 17.8 19.2 15.8 17.2 10.5

30m 19.0 18.9 17.1 18.0 16.7 18.0 14.9 16.1 9.9 11.8

32m 17.8 15.7 16.8 15.8 16.9 14.1 15.1 9.2 11.0

34m 13.5 15.8 14.5 15.9 13.1 14.3 8.6 10.2

36m 15.0 13.2 15.0 12.0 13.5 8.1 9.5

38m 14.2 12.1 14.1 11.1 12.7 7.7 8.9

40m 13.5 10.3 12.1 7.3 8.4

42m 12.6 9.5 11.5 6.9 7.9

44m 11.8 11.0 6.5 7.5

46m 10.3 6.2 7.1

48m 9.5 5.9 6.8

50m 5.6 6.4

52m 5.4 6.1

54m 5.1 5.8

56m 5.5

58m 5.3

60m

62m