hydrotesting pump final...note: thp series hydraulic pump test bench also available with chart...
TRANSCRIPT
-
P I P E L I N E S O L U T I O N S
HYDROTEST PUMP
-
TRITORC THP SERIES PNEUMATIC (AIR DRIVEN)
HYDRAULIC PRESSURE TEST BENCH
TRITORC- Hydraulic test benches are compact and delicacy solution tailored to customer specific requirements with air
driven liquid pumps as well as all accessories to be fitted and installed on the frame or in closed cabinet.
To operate this system, the pressure gauges, valves and pressure regulators have to be fitted on panels. The outlet pressure
is easily to be set through a simple air regulator. The pump stops automatically when this end pressure is reached and restarts
with a slight drop in the outlet pressure or an increase in the air drive pressure. TRITORC Hydraulic power packs are available
with wide range of pressure ratios make these series of pumps ideal for powering a variety of oil/hydraulic operations.
THE MAXIMUM OPERATING PRESSURE UP TO 6400 BAR.
As the pressure will be generated by means of a pneumatically operated pump,the electric connection will not be necessary. To operate this system, the air driven liquid pump have to be equipped with the air control unit combined filter
and water separator, pressure-regulating valve, pressure control gauge as well as manual relieve valve. In this operation, the
pump will be mounted to the stainless steel tank in the closed cabinet in a compact and space saving manner.
Pressure gauges, valves and pressure regulators will be fitted on panel.
The desired operating pressure can be attained by adjusting the driving air pressure. When the driving air pressure and the
output pressure reach the balance, the pump stops filling pressure and the output pressure stays at the preset value.
This hydraulic unit can be used for all kinds of pressure testing and test tools for research and test institutes or for other
functions requiring a determined pressure.
OUR MAIN PRODUCTS INCLUDING:
High Pressure Booster Pumps (Air Driven Gas Booster Pump, Air Driven Liquid Pump, Air Amplifiers)
High Pressure Systems (Gas/Liquid Booster Stations,FM200 filling machine, Tube Expanding Machine)
High Pressure Test Equipment(Hydraulic/Burst/Hydrostatic test machine,Cylinder test machine,
Valve test bench,Impulse Testing Machine, etc.)
PRODUCT APPLICATION
Oil Industry, Gas Industry, Chemical Industry, Fire Fighting, Research Institutions etc.
OUR SERVICE
13 months’ free warranty since the purchasing date and free technical support during lifetime
We o�er the most complete range of Air driven liquid pump models in the industry measured for:
A. Capability of ultimate pressure, flow or output horsepower.
B. Compatibility with a broad variety of liquids, such as oil, water and chemical applications.
www.tritorc.com
1
-
www.tritorc.com
2
Application Pictures
APPLICATIONS INCLUDE:
• Pressure testing
• Burst (Hydrostatic) testing
• Work holding/power clamping
• Jacking/lifting
• Valve actuator control
• Hydraulic cylinder actuation
• Press safety overload devices
• Roller tensioning
• Metering
• Precision lubrication and spraying
• Liquefied gas transfer
KEY FEATURES INCLUDE:
• Compressed Air driven - no electricity required (connect to normal air compressor)
• In order to extend the lifetime of the pump, the driving air pressure should not be higher than 8 bar
• No airline lubricator required
• Pressures to 640Mpa (6400 bar)
• Wide range of models with di�erent ratios
• Built-in-cooling on most models
• Easy to install, operate and maintain
• Best price / performance ratio
• No heat, flame or spark risk and explosion proof
• Automatic pressure holding, whatever the cause of the pressure drop, the TRITORCpump will automatically start, keep the
loop pressure constant.
-
TRITORC LIQUID BOOSTER SYSTEM WORKING CIRCUIT
www.tritorc.com
Tritorc Liquid Booster SystemBoost Medium: Water/oil/chemical Liquid
For Hydraulic/hydroststic Test Or Chemical Injection
Low PressureLiquid Inlet
Air CompressorDriven Air Pressure:3-8 BarFlow Rate: 800-1000L/min
Pneumatic(Air Driven)Portable And Small SizeAutomatic And Easy OperatingMax Pressure Upto 640mpa
Drive Air Inlet Here
High PressureLiquid Outlet
3
-
www.tritorc.com
The standard hydraulic test bench including following parts:
Circuit Principle for Tritorc Hydrostatic System
Air - driven liquid booster pump.
Stainless steel material cabinet (Three models for choosing).
F.R.L combination for driven air (adjusts air pressure, add lubricating oil and filter).
Driven air switch (Pump starting switch), driven air pressure gauge, water tank.
Liquid Inlet /outlet switch, high pressure liquid Guage, unloading valve, interconnecting pipes etc.
And we could also customize it according to clients’ special requirement, as well as we provide chart recorder.
THP SEREIS HYDRAULIC PRESSURE TEST BENCH-THE HOTTEST SELLING
MODEL C CABINET
CHART RECORDER
4
Unloading Valve
Liquid filter
High pressureliquid outlet
Pressure gage
Mu�e
Tested Part
Test Cabinet
TRITORC Booster Pump
driving air switch
F.R.L Combination
1
7
10
11
9
13
163
62
Liquid Tank
driving airinlet conectingwith air compressor
-
Drive Air Inlet Port
High PressureOutlet Port
www.tritorc.com
The standard hydraulic test bench including following parts:
THP SERIES HYDRAULIC PUMP TEST BENCH WITHOUT CHART
RECORDER
5
-
THP-L SERIES LOW FLOW RATE LIQUID PUMPS (SINGLE ACTING,
AIR DRIVE HEAD)
They have aluminum bodies, with oxidation treatment and wetted materials of carbon steel or stainless steel, which
depending on di�erent service liquid. Material of stainless steel, making them an excellent choice of water application.
• Portable design.
• High quality seals, long service life available
• Easy to install, operate and maintenance.
• Explosion proof and no electrical power required.
TECHNICAL SPECIFICATION
www.tritorc.com
6
Model
Driven air
pressure PL
MAX Outlet
Pressure (Bar)
Driven air
inlet port
High
pressure rate
Outlet port
Pressure
Boost
Ratio
MAX Flow
(L/Min)**
THP-LFP1 3-8 bar
3-8 bar
3-8 bar
3-8 bar
3-8 bar
3-8 bar
3-8 bar
NPT 1/2" 9/16"-18 UNF
THP-LFP4 NPT 1/2" 9/16"-18 UNF
THP-LFP100 NPT 3/4" 9/16"-18 UNF
THP-LFP16 NPT 1/2" 9/16"-18 UNF
THP-LFP30 NPT 1/2" 9/16"-18 UNF
THP-LFP44 NPT 3/8" 9/16"-18 UNF
THP-LFP64 NPT 3/8" 9/16"-18 UNF
3-8 barTHP-LFP170 NPT 3/8" 9/16"-18 UNF
THP-LFP100 NPT 3/8" 9/16"-18 UNF3-8 bar
1:1 8 20.50
4:01 32 15.36
10:01 80 7.15
16:01 128 4.59
30:01:00 240 2.53
44:01:00 352 1.41
64:01:00 512 0.95
100:01:00 800 0.64
170:01:00 1360 0.37
The outlet liquid pressure=Driven air pressure*boost ratio
In order to extend the lifetime of the pump, the driving air pressure should not be higher than 8 bar.
-
TH-MFP SERIES MEDIUM FLOW RATE LIQUID PUMPS (SINGLE ACTING,
AIR DRIVEN HEAD)
Medium Flow Rate Pump have aluminum bodies and wetted materials of stainless steel or carbon steel ,which depends on
di�erent service liquid. Materials of stainless steel, make them an excellent choice of water application. High quality seals,
long service life available.
TECHNICAL SPECIFICATION
www.tritorc.com
7
NOTE: THP Series Hydraulic Pump Test Bench also available with Chart Recorder.
The outlet liquid pressure=Driven air pressure*boost ratio
In order to extend the lifetime of the pump, the driving air pressure should not be higher than 8 bar.
Model
Driven air
pressure PL
MAX Outlet
Pressure (Bar)
Driven air
inlet port
High
pressure
Outlet port
Pressure
Ratio
MAX Flow
(L/Min)**
3-8 bar
3-8 bar
3-8 bar
3-8 bar
3-8 bar
3-8 bar
3-8 bar
NPT 1/2" 9/16"-18 UNF
NPT 1/2" 9/16"-18 UNF
NPT 1/2" 9/16"-18 UNF
NPT 1/2" 9/16"-18 UNF
NPT 1/2" 9/16"-18 UNF
NPT 1/2" 9/16"-18 UNF
NPT 1/2" 9/16"-18 UNF
3-8 bar NPT 1/2" 9/16"-18 UNF
NPT 1/2" 9/16"-18 UNF3-8 bar
3-8 bar NPT 3/8" 9/16"-18 UNF
NPT 1/2" 9/16"-18 UNF3-8 bar
3-8 bar NPT 1/4" 9/16"-18 UNF
NPT 1/4" 9/16"-18 UNF3-8 bar
3-8 bar NPT 1/4" 9/16"-18 UNF
NPT 1/4" 9/16"-18 UNF3-8 bar
4:01 32 70
TH-MFP6 6:01 48 29.91
TH-MFP10 10:01 80 18.84
TH-MFP16 16:01 128 12.42
TH-MFP28 28:01:00 224 7.11
TH-MFP40 40:01:00 320 4.89
TH-MFP64 64:01:00 512 3.08
TH-MFP80 80:01:00 640 2.44
TH-MFP100 100:01:00 800 1.92
TH-MFP130 130:01:00 1040 1.47
TH-MFP175 175:01:00 1400 1.14
TH-MFP255 255:01:00 2040 0.75
TH-MFP400 400:01:00 3200 0.48
TH-MFP510 510:01:00 4080 0.65
TH-MFP800 800:01:00 6400 0.42
TH-MFP4
-
THP-DAH SERIES HIGH FLOW RATE LIQUID PUMPS (DOUBLE ACTING,
AIR DRIVEN HEAD)
They are characterized by the same features as the MFP pumps single acting, single air drive head types, but they have less
pulsations and deliver approx. 50 % more flow.
TECHNICAL SPECIFICATION
www.tritorc.com
8
NOTE: THP Series Hydraulic Pump Test Bench also available with Chart Recorder.
The outlet liquid pressure=Driven air pressure*boost ratio
In order to extend the lifetime of the pump, the driving air pressure should not be higher than 8 bar.
Model
Driven air
pressure PL
MAX Outlet
Pressure (Bar)
Driven air
inlet port
High
pressure
Outlet port
Pressure
Ratio
MAX Flow
(L/Min)**
3-8 bar
3-8 bar
3-8 bar
3-8 bar
3-8 bar
3-8 bar
3-8 bar
9/16"-18 UNF
NPT 1/2" 9/16"-18 UNF
NPT 1/2" 9/16"-18 UNF
NPT 1/2" 9/16"-18 UNF
NPT 1/2" 9/16"-18 UNF
NPT 1/2" 9/16"-18 UNF
NPT 1/2" 9/16"-18 UNF
3-8 bar NPT 1/2" 9/16"-18 UNF
NPT 1/2" 9/16"-18 UNF3-8 bar
3-8 bar NPT 3/8" 9/16"-18 UNF
NPT 1/2" 9/16"-18 UNF3-8 bar
3-8 bar NPT 1/4" 9/16"-18 UNF
NPT 1/4" 9/16"-18 UNF3-8 bar
4:01 32 70
TH-DHFP6 6:01 48 48.60
TH-DHFP10 10:01 80 30.61
TH-DHFP16 16:01 128 19.73
TH-DHFP28 28:01:00 224 11.30
TH-DHFP40 40:01:00 320 7.69
TH-DHFP64 64:01:00 512 4.94
TH-DHFP80 80:01:00 640 3.96
TH-DHFP100 100:01:00 800 3.13
TH-DHFP130 130:01:00 1040 2.40
TH-DHFP175 175:01:00 1400 1.81
TH-DHFP255 255:01:00 2040 1.23
TH-DHFP400 400:01:00 3200 0.79
TH-DHFP4 NPT 1/2"
-
THE STANDARD LIQUID PUMP SYSTEM INCLUDING FOLLOWING PARTS:
Air–driven liquid booster pump (LFP/MFP/DHFP Three series for choosing)
Stainless steel (carbon steel) material cabinet (Three models for choosing)
F.R.L combination for driven air (adjusts air pressure, add lubricating oil and water filter)
Driven air switch (Pump starting switch), driven air pressure gauge, water tank
Liquid inlet/outlet switch, high pressure liquid gauge, unloading valve, interconnecting pipes etc.
And we could also customize it according to clients’ special requirement.
For the hydraulic test station (liquid booster station), we have three
different cabinet design for choosing
www.tritorc.com
9
How to Select TRITORC Air Driven Liquid Boosters/Systems?
In order to choose suitable liquid booster pump or systems for you,
please kindly reply us the following questions:
1.What is the liquid you want to booster?
2. What outlet liquid pressure do you want?()bar
3. What driven air pressure (of your air compressor) can you o�er?( )bar, because our booster is completely air operated and
no need any electricity
4. What outlet liquid flow rate do you need?( )L/min
Model A
closed type with
carbon material
Model B
closed type with
stainless steel material
Model C
frame type with
stainless steel material
-
www.tritorc.com
10
• Zero adjustable pointer • Standard 100 charts included • Standard extra felt tip pen
• Original Peli™ Case• Vortex valve™• IP67• Reinforced Padlock Protectors• Virtually indestructable• Lightweight design• Meets airline carry-on regulations
• Chart Ø300 / 12”• Only 10.6kg /
23.4 lbs
• Chart Ø223 / 9”• Only 6.4kg /
14.1 lbs
• Chart Ø300 / 12”• IP65• Lockable• Only 10.6kg /
23.4 lbs
• Chart Ø223 / 9”• IP65• Up to 3 felt tip
pens• Only 6.4kg /
14.1 lbs
• Chart Ø163 / 6”• IP45• Compact• Only 3.1kg /
6.8 lbs
Case and wetted parts 316L Stainless SteelATEX II 2G c or II 2D c compliant
Portable, flush or wall mounted
-
Specialized in sales, rentals & onsite bolting & services
We have o�ces at:-India, Oman, Qatar, KuwaitSaudi Arabia, Africa, UAE
TRITORC INC.5041 Spencer Highway, Suit # 302, Pasadena, Texas: 77502, USATel: +1 281 5068672, E-mail: [email protected]
TRITORC FZCR6-05C, Saif Zone, P.O. Box No: 513586, Sharjah, UAE,Tel: +971 65529407, E-mail: [email protected]