i-pasolink initial setting and equipment...
TRANSCRIPT
1
I-PASOLINKI-PASOLINKInitial setting and equipment Initial setting and equipment
configurationconfiguration
TOPC-E4011E-02- XXXXXX
I-PASOLINK configuration and initial I-PASOLINK configuration and initial setupsetup
Note; LCT Port supports DHCP Default IP address is 172.17.254.253
10/100 Base-TX (RJ-45)
For iPasolink 1000
For iPasolink 400
For iPasolink 200
TOPC-E4011E-02- XXXXXX 3
LCT COMMUNICATION INTERFACELCT COMMUNICATION INTERFACE
THE LOCAL CRAFT TERMINAL IS USED TO SETUP, MONITOR AND MAINTAIN iPASOLINK RADIO. iPASOLINK SUPPLY USER GUI ENVIRONMENT THROUGH WEB BROWSER. LCT SUPPORTS BOTH LOCAL AND REMOTE
CONNECTIONS
COMMUNICATION BETWEEN THE LCT AND THE iPASOLINK IS VIA THE LCT PORT OF IDU CONNECTED BY LAN CABLE.
10/100 Base-TX (RJ-45)
SET THE PC INTERNET PROTOCOL, TCP IP PROPERTIES TO “OBTAIN IP ADDRESS AUTOMATICALLY “ AND “OBTAIN DSN SERVER ADDRESS AUTOMATICALLY”
LCT Port supports DHCP Default IP address is 172.17.254.253
4
LCT Startup and LoginLCT Startup and Login
Start the browser Internet Explorer and enter the URL http://172.17.254.253/weblct/ to open the WebLCT Login screen.
Enter the “User Name” and “Password” in the provided text boxes and Click Ok button
Default Username : Admin
Password: 12345678
LCT main menu opens in the “Current Status screen”
5
WebLCT LOGOUTWebLCT LOGOUT
To Logout of the WebLCT, click on the Logout button on the top right hand of the LCT screen.
When Logout Confirm window appears, Click Yes
LCT Login window appears
Close the Browser window to exit WebLCT.
Always Logout using this button before disconnecting the cable.
6
WebLCT Initial ScreenWebLCT Initial ScreenLogin User Name
Indicate the current logged in user
Summary Alarm Indication
Indicate the summary alarm of ODU, IDU, AUX I/O, TCN, & Maintenance Status
Opposite Site Links
Connect to opposite station (s)
Maintenance
Maintenance ON/OFF button
Logout
Logout button
Menu tree
Indicate the LCT Main Menu
Block Diagram
Indicate the ODU, IDU and Interfaces
mounted
Detail Display
Display detail alarm & status information of items selected from the Tabs
7
WebLCT Initial ScreenWebLCT Initial ScreenF/W Version
Indicate the current Firm Ware Version
Site (NE) Name and IP Address
Indicate Network element name and it’s IP address
Opposite Site Links
Connect to opposite station (s)
Connecting to opposite site
Click on the opposite site links and select the site to connect to. Login screen for selected opposite site
open in a separate browser window
8
NETWORK MANAGEMENT NETWORK MANAGEMENT
9
GENERAL SETTINGGENERAL SETTING
Item Parameter Description
IP Address Setting (Bridge 1)
IP Address x.x.x.x Input Primary IP Address of NE
Subnet Mask x.x.x.x Input Subnet Mask
Default Gateway x.x.x.x Input Default Gateway IP
address
NMS Port Setting
Connect NMS Port to
NMS
Yes Use NMS Port
No Not use NMS Port
1Select General Setting from the Network Management Configuration Menu. NE Primary IP Setting is displayed
1Click the Setup icon, General Setting window opens.
22
Enter the Primary IP address for the NE (Bridge1), Subnet Mask, and Default Gateway for the Bridge1. See the table for details
3
3
10
GENERAL SETTING (DETAIL) 1 of 5GENERAL SETTING (DETAIL) 1 of 5
1
Select General Setting (Detail) from the Network Management Configuration Menu. General Setting Detail screen opens showing the network parameter setting
1
2
2
To change Network parameters, Click the Setup icon, General Setting (Detail) window opens
3
3
After changing/ modifying the parameters click OK button
11
GENERAL SETTING (DETAIL) 2 of 5GENERAL SETTING (DETAIL) 2 of 5Item Parameter Description
NE2 Port Setting
NE2 Port IP
Address
x.x.x.x Input IP Address of NE2 port used
for serial back-back connection
NE2 Port
Usage
Used Use NE2 port
Not Used Not use NE2 port
NE2 Port
Speed
9600 specify the line speed of NE2 port2
19200
Ethernet Port Setting (NMS / NE1 Port)
Usage Used Use Ethernet port
Not Used Not use Ethernet port
Auto
Negotiation
Enable enable the Auto Negotiation of
Ethernet port
Disable Disable the Auto Negotiation of
Ethernet port
Discovery
Usage
Used search of the network access
machinery using Ethernet connectionNot Used
NE Branch Setting
Branch
Number
1 to 4
Branches
Select the Branch Number
Default
Gateway
x.x.x.x Input the Default Gateway
Restrict LCT Connection
LCT Port
Setting
Any Connection from Local/Remote to
LCT Port
Only to
Local NE
only connection from Local to LCT
Port
Item Parameter Description
Inband Management VLAN Setting
VLAN ID 1 to 4094 VLAN ID of Inband Management VLAN
Inband management
VLAN usage
Used Use Inband management VLAN
Not Used Not use inband management function
IP Address x.x.x.x Enter IP address of inband management port
Subnet mask x.x.x.x enter subnet mask for inband management
12
GENERAL SETTING (DETAIL) 3 of 5GENERAL SETTING (DETAIL) 3 of 5
13
GENERAL SETTING (DETAIL) 4 of 5GENERAL SETTING (DETAIL) 4 of 5
When NE2 port is used for serial connection to other PASOLINK configure this NE2 Port Setting
When NE2 port is used for serial connection to other PASOLINK configure this NE2 Port Setting
Select usage of NMS and NE1 ports set the port parameters accordinglySelect usage of NMS and NE1 ports set the port parameters accordingly
LCT Port Setting : select “any” radio button to connect to remote NEs. From the local LCT Port
Select “Only to Local NE” radio button to prevent connection to remote NE from local LCT port.
LCT Port Setting : select “any” radio button to connect to remote NEs. From the local LCT Port
Select “Only to Local NE” radio button to prevent connection to remote NE from local LCT port.
Select Inband Management VLAN SettingSelect Inband Management VLAN Setting
14
GENERAL SETTING (detail) 5 of 5GENERAL SETTING (detail) 5 of 5
Select to which branch NMS port belongs to
Select to which branch Modem-2 port belongs to
Select the number of branches the NE belongs to
Enter the Bridge 2, IP address and Subnet Mask
15
ROUTING SETTINGROUTING SETTING