Instruction provided by iclarified.com

Phone | How to Unlock the iPhone 3G   Thursday, 1st January 2009, 10:01 am     

These are instructions on how to software unlock the iPhone 3G for use with any GSM cellphone carrier.

Before you can follow these instructions you must have a jailbroken iPhone and you must be on the 02.28.00 baseband(modem firmware). This means that you must be running the 2.2 firmware. If you used PwnageTool to update to 2.2 from 2.1 you will have to re-jailbreak using a QuickPwn jailbreak tutorial for the time being.

To find your firmware and modem firmware(baseband) versions you can follow this tutorial. If you are not on firmware version 2.2 and baseband version 02.28.00 then you need to follow one of these tutorials before unlocking: Mac, Windows

Watch the Video!For your convenience this tutorial is available in video format also. Click the Watch It button to view the tutorial!

Step OnePress to launch Cydia Installer from your SpringBoard.

Step TwoPress to select the Manage tab at the bottom of the screen.

Step ThreePress to select the large Sources button

Step FourPress the Edit button at the top right of the screen.

Step FivePress the Add button at the top left of the screen.

Step SixEnter http://apt9.yellowsn0w.com/ as the source url and press the Add Source button.

Step SevenOnce the source has been added press the large Return to Cydia button.

Step EightPress the Done button at the top right of the screen.

Step NinePress to select apt9.yellowsn0w.com from the list of user entered sources.

Step TenPress to select yellowsn0w from the list of packages

Step ElevenPress the Install button at the top right of the screen.

Step TwelvePress the Confirm button at the top right of the screen.

Step ThirteenAfter installation completes successfully press the large Return to Cydia button.

Step FourteenNow press the Home button then power off and power on the iPhone. You do this by holding down the power button for 3 seconds then moving the power slider that appears to the right. Press the power button again to turn on the phone.

Step FifteenYou should now be able to insert the SIM of your choice!

***HINTS: It seems that getting your iPhone to pick up your new carrier can be helped by turning off 3G and perhaps toggling the Airplane Mode switch on and off. If you are still having problems try removing and reinserting the SIM or booting with the new SIM already inside. Finally, you can also try to Reset Network Settings from the Settings:General:Reset Menu.

***IMPORTANT: For those having trouble. The yellowsn0w application can simply be uninstalled. If you have tried all the hints and suggestions and still have problems just use Cydia to remove the package and then reboot. You will then have service with your locked carrier as always.

***THANKS: A big thank you to all the members of the iPhone Dev-Team for all their hard work! It is much appreciated by all.

***UPDATES: The Dev-Team has made the following updates...1. Soon you’ll see yellowsn0w 0.9.1 in the repos. It uses a much longer delay to let your SIM card initialize. If you have problems with 0.9.0, try this one and wait a full minute after you see homescreen, then reinsert sim card. We need both success and failure reports to tune this across the world, so please be patient (but please also report result!)2. If you are in the U.S. and are trying this with T-Mobile, you must turn off the 3G switch in Settings. Also if you are good with the command line, you can make it much easier by adding the line -q right after the /usr/bin/yellowsn0w line in /System/Library/LaunchDaemons/org.iphone-dev.yellowsn0w.plist (that’s and advanced tip, hopefully someone will make a boosprefs type of tool for it)3. No PIN support yet. Remember how we said this was beta? Well we’re still working out the flow for SIMs with PINs enabled. Please disable any PIN you may have on that SIM before trying yellowsn0w, for now..

-------------------------------------------   510 comments [add] | 128383 views [digg it] [buzz] [del.icio.us] [stumbleupon] [email it]

-------------------------------------------Recent iPhone Entries2009-01-01 10:51:17 - How to Unlock the iPhone 3G2008-12-31 19:00:01 - How to Find the Firmware and Baseband Version of Your iPhone2008-12-18 23:52:20 - How to Enable DFU Mode in Mac OS X 10.5.62008-12-12 19:24:26 - How to Copy and Paste Using PasteBud for iPhone2008-11-25 21:25:47 - How to Enable Japanese Emoticons on Your iPhone2008-11-23 20:33:17 - How to Select an iPhone Unlock/Jailbreak Tutorial2008-11-23 01:45:46 - How to Unlock/Jailbreak Your 2.x.x 2G iPhone Using QuickPwn (Windows)2008-11-23 01:12:50 - How to Jailbreak Your iPhone With QuickPwn (Mac) [Updated 2.2]2008-11-23 00:56:31 - How to Jailbreak Your 2.x.x 3G iPhone Using QuickPwn (Windows)2008-11-22 23:09:14 - How to Unlock/Jailbreak Your 2.x.x 2G iPhone (Mac) [Updated 2.2][more] [rss]

Recent News Entries2009-01-08 23:52:15 - Boxee Alpha Opened for Mac, Ubuntu, and Apple TV2009-01-08 22:02:39 - Four Core iPhone With Firmware 3.0?2009-01-08 17:39:26 - Refurbished iPhone 3G Now Available at Best Buy2009-01-08 16:27:52 - Pixaria Software updates PopCard.me2009-01-08 15:56:58 - Disk Doctor Labs Launches Data Recovery Software[more] [rss]