> World Series Contactors3TF4 4-Pole and 3TF8 Reversing with AC Coil

Selection

r

3TF82

Ordering Information

> Select Contactor from table below.>• Complete Catalog Number from coil suffix table. Example: 3TF4180-OAK6.> Accessories see pages 412-413.

AC Contactors—4 NO Power Poles

EnclosedAmp RatingsIECAC3

J2

UL

20

3 Phase HP Ratings

200V3

230V3

460V7'/z

600V10

Auxiliary ContactsType

( fNO NC1 | 1

Catalog No3TF4180-OAtt

Price $195.

b\\ Table 3TF4180120VK6

240VP6

277VPO

AC Contactors—2 NO, 2 NC Power Poles

EnclosedAmp RatingsIECAC3 UL

20

3 Phase HP Ratings

200V3

230V3

460V7'/2

600V10

Auxiliary ContactsType

i rNO NC1 | 1

Catalog No3TF4182-OAtt

Price $195.

1Boil Table 3TF418224VC1

120VK6

220VN1

277VPO

AC Contactors—Compact Reversing Type 3TF8 (AC Operated)The type 3TFB reversing contactor contains both the forward and reverse contactors and interlocks in one compact housing,simplifying the component arrangement. Mechanically interlocked, it reduces panel space by 50% over conventional reversing contactors.

EnclosedAmp Ratings

JEC|C3

9123232

UL

9184545

3 Phase HP Ratings

230V23

1010

460V35

2020

500V35

2020

600V35

2020

Auxiliary ContactsType

i rNO NC111—

11—1

Catalog No3TF8232-OAtt3TF8332-OAft3TF8631-OAtt3TF8633-OATT

Price $237.270.304.304.

oo

Coil Table 3TF8232 / 3TF833224VC2

120VK2

208VM2

220VN2

240VP2

277VPO

Coil Table 3TF8631 /3TF863324VC1

120VK1

220VN1

240VP1

277VPO

»Discount Code: World Series

Siemens Industr ial Control Products

,411

\\

<Ou"5.2a. to< a

General InformationNorth American Approvals

General

INSTALLATION CONSIDERATIONSThe control products described in this cata-log have been designed, tested and manu-factured in accordance with a wide variety ofstandards including but not limited to thoseissued by UL, CSA, NEMA and IEC. Thesestandards typically apply to the control prod-uct as a component and not the installationor use of the product. It is the responsibilityof the end user of the control product tomake sure each installation complies with allof the applicable safety requirements, laws,regulations, codes and standards (someexamples of which are the N.E.C., the C.E.C.

and OSHA regulations). Note that localauthorities may impose further jurisdictionover each installation. When in doubt, con-sult with the local inspection authorities.Unless otherwise specified, the control prod-ucts described in this catalog are designedto operate under "usual service conditions"as defined in NEMA Standards Publication—Part ICS 1-108. Open type devices areintended for installation in enclosures thatprovide environmental protection as neededfor the specific application. See pages 14and 15 for definitions of the various enclo-sure types.

PERFORMANCE DATAWhere given in this catalog, performancedata should only be used as a guide to deter-mine the suitability of the product for anapplication. The data may be the result ofaccelerated testing or elevated stress levelsunder controlled conditions. The user musttake care in correlating this data to actualapplication or service conditions.UL and CSA—File Numbers and GuideCard Numbers

Most control equipment listed in this catalog isdesigned, manufactured and tested in accor-dance with the relevant UL and CSA standardsas listed in the table below.

Siemens Brand DevicesDescription

3TH2Control Relays 3TH3

3TH8AC contactors, DC contactorsReversing StartersOverload relaysTerminal blocksManual Motor Controller 3VUStarters, Combination StartersPush buttonsLighting and Heating ContactorsMechanical Limit Switches

International StyleNorth American Style

Fast Bus Components/KitsModular Motor Controllers Type EModular Motor Controllers — Group InstallationUS Series StarterFraction Hp Starters, SMF, MMSSirius 3RT ContactorsSirius 3RV MSP— Group Installation

Type ESirius 3RD OverloadSirius 3RH RelaysSirius 3RP TimersMiniature Circuit Breakers — 5SXManual Motor Controllers — 3LDSirius 3RA Combination StartersSirius 3RA Reversing ContactorsSirius 3RA Fastbus Combo StartersSirius 3RB Solid State Overloads

@Guide No File No

Class 1711 LR1273°LR 50487

Class 3211 LR 12730Class 3211 LR 38590Class 3211 LR 12730Cldss !2 !1 LR 50181Class 32 11 LR 50487Class 3211 LR 38590Class 3211 LR 12730Class 3231 LR 38590

Class 321 1 LR 50487Class 3211 LR 68551

— —Class 3211 LR 50487Class 3211 LFI 38590

Class 3211 LR 12730Class 3211 LR 12730

Class 3211 LR 12730Class 3211 LR12730, LR50487Class 3211 LR 12730Class 3211 LR 93659Class 3211 LR 19188

Class 3211 LR 38590

Class 3211 LR6B35

©Guide No File No

NKCR E 44653

NLDX E 31 51 9NLDX E 32529NKCR E 44653

NLVR E 47705NLDX E 32529NCXR E 44653. E 4751 2NRNT E 60310

NKCR E 44653NKCR E 47512NMTR E 155959NKJH E 156943NLRV E 47705NLDX E 32529

NLDX E31519NLRV E47705NKJH E 156943NKCR E 44653NKCR E 44653NKCR E 44653

NLRV E 47705NKJH E 156943NLDX E 31519NKJH E 156943NKCR E22655

wGuide No File No

NKCR2 E 44653

NLDX2 E 31 51 9

NKCR2 E 44653XCFR2 E 80027

— —

NKCR2 E 44653

NMTR2 E 160776

— —— —NLRV2 E 80332NLDX2 —— —

NKCR2 E 44653NKCR2 E 44653

NKCR2 E 116386

— —

— —

Furnas Brand DevicesClass

11, 12 — Manual Switches14, 22. 30, 40, 43 — Starters and Contactors17, 18, 25, 26, 32— Combination Starters36, 37— Reduced Voltage Starters83, 84, 85, 87. 88— Pump Control Panels50 — Standard Duty Pilot Devices51 — Hazardous Location Pilot Devices52—30 mm Pilot Devices16, 41, 42, 45— Definite Purpose Controls46, 47— Relays48, 948, 958— Overload Relays49— Field KitsClass 56— Fast SwitchClass 53 — Master SwitchClass 69— Pressure Switch

<§Guide No File No

Class 3211 LR6535Class 3211 LR6535Class 3211 LR6535Class 3211 LR6535Class 3211 LR6535Class 3211 LR6535Class 321 8 LR 23889Class 3211 LR6535Class 3211 LR6535Class 3211 LR6535Class 3211 LR6535Class 3211 ELR535Class 3211 LR6535Class 3211 LR6535Class 3211 LR6535

©Guide No File No

NLRV E 10590NLDX E 14900NKJH E 185287NLDX E 14900NKJH E 185287NKCR E 22655NOIV E 39935NKCR E 22655

NKCR E 22655NKCR E 22655NLDX E 14900NLRV E 10590NKCR E 22655NKPZ E 14861

%Guide No File No

NLRV2 E 10590NLDX2 E 14900

NLDX2 E 14900

NKCR2 E 22655NLDX2 E 14900NKCR2 E 22655NKCR2 E 22655NLDX2 E 14900— —

NKPZ2 E 14861

Siemens Industr ial Control Products

^^

General InformationInternational Approvals

General

Siemens control is designed, manufac- 0660 requirements. This global designtured and tested in accordance with rele- philosophy assures that most Siemensvant IEC standards, CENELEC low-voltage equipment can be usedAgreement Documents and DIN VDE worldwide. Occasionally, there may beNational Authorities for Standards and Specifications

some restrictions on maximum permit-ted voltages, currents and ratings and, inothers, special approval or markings maybe necessary.

Abbreviation

ANSI

AS

BS

CE

CEE

CEI

CEMA

CEN

CENELEC

CSA

DEMKO

DINEEMAC

IEC

IEEE

IS

ISOJIS

KEMA

NBN

, NEMA

NEMKO

NEN

OVE

RER

SABS

SASO

SEMKO

SEN

SETI

SEV

UL

UTE

VDE

ApprovalIdentification

ce

@

@

®

N

@>

®

®

®

Meaning

American National Standards InstitutePublishes specifications and standards in virtually all fields (not only electrical). For low-voltage switchgear,the ANSI has adopted the American NEMA and UL specifications to a large extent

Australian StandardsAlready partially adapted to IEC

British StandardAlready partially adapted to IEC

Communautes EuropeenesEuropean conformity marking. Declares that the product meets the directives of the European Union (EU)

International Commission on Rules for the Approval of Electrical EquipmentPartially used by the Scandinavian countries as a basis for low-voltage switchgear with rated currents up to 63A

Comitato Elettrotecnico ItalianoItalian electrotechnical committee

Canadian Electrical Manufacturers Association

Comite Europeen de NormalisationEuropean committee for standardization

Comite Europeen de Normalisation ElectrotechniqueEuropean committee for electrotechnical standardization (general secretariat in Brussels)

Canadian Standards AssociationResponsible for publishing standards and granting approvals

Danmarks Elektriske MaterielkontrolDanish board of control for electrotechnical products. Responsible for publishing standards and granting approvals

Deutsches Institut fur Normung e.V (German Industrial Standards!

Electrical and Electronic Manufacturers Association Canada

International Electrotechnical Commission(French: CEI) All the major industrialized countries are involved in the work of the International Electrotechnical Commission.The resulting IEC recommendations are to some extent either adopted directly into national specifications and standards, orthe national specifications and standards are adapted to harmonize with these recommendations

Institute of Electrical and Electronics Engineers

Indian Standard (Indische Bestimmungen)Already partially adapted to IEC

International Organization for Standardization

Japanese Industrial Standard

Keuring van Elektrotechnische MaterialenDutch testing authority, which also performs CSA approval tests for European manufacturers

Normes de I'lnstitut Beige de NormalisationStandards issued by the Belgian standards institute (already partially adapted to IEC)

National Electrical Manufacturers Association

Norges Elektriske MateriellkontrollNorwegian controls authority for electrotechnical products, responsible for publishing standards and granting approvals

Nederlandse NormDutch standard

Osterreichischer Verband fur ElektrotechnikAustrian association for electrotechnology. Conforms to a large extent with the DIN VDE and IEC specifications

Rafmagnseftrilit rikisinsFinnish testing authority for electrotechnical products

South African Bureau of Standards

Saudi Arabian Standards Organization

Svenska Electriska MaterielkontrollanstaltenSwedish controls authority for electrotechnical products, responsible for publishing standards and granting approvals

Svenska Elektrotekniska NormerSwedish electrotechnical standards

Finnish electrotechnical testing authority

Swiss electrotechnical association

Underwriters' Laboratories Inc.Testing authority of the national fire insurance in the USA. Among other activities, it carries out testingon electrotechnical products and issues the corresponding specifications and regulations

Union Technique de I'ElectriciteFrench electrotechnical association

Verband Deutscher Elektrotechniker e.V. (Association of German Electrical Engineers)

ooS

Siemens Industr ia l Contro l Products