ic system - rain bird
TRANSCRIPT
28
Atlanta Athletic Club
Achieving optimal playing conditions isn’t so much an issue of working harder, it’s working smarter. Add the Rain Bird intelligent and intuitive IC System with IC CONNECT™ and you’re on your way. Communicate directly with every rotor on your course, and gain one-of-a-kind property management with IC CONNECT. With an intuitive interface operated from a computer, tablet or mobile device, the IC System puts control in your hands, anywhere.
IC System™
A Revolutionary, Yet Simple Approach to Field Control.
29
IC S
YS
TE
M™
Streamlined Installation and Expansion
• Cut installation cost and time by eliminating unneeded wire, trenching and splices.
• Minimize labor costs during expansion by simply connecting new IC rotors to any existing MAXI™ Wire.
Pinpoint Diagnostics and Control
• 45 seconds for 1000+ stations.
• Narrow in on potential problems and resolve issues quickly to prevent turf damage and unnecessary labor costs.
• Bring greater precision and water savings to areas requiring supplemental watering (hot spots, greens, grow-ins).
IC System™IC
SY
ST
EM
™
30
IC Rotors and Valves
IC Rotors and ValvesSPECIFICATIONS
System Capacity*: 750 ICMs per Output Wire Path, 1,500 ICMs per Output Driver Board, 3,000 ICMs per IC Interface (ICI), up to 36,000 ICMs with Cirrus™
ICI Electrical Specifications: 115 VAC: Nominal 98-132 VAC 220-240 VAC: Nominal 208-255 VAC 100 VAC: Nominal 91-110 VAC
Electrical Output: 28.5 VAC, 1.25 AMP Per Wire Path
Active Stations: No electrical limit — only limited by hydraulics of pipe network and size of pump station
ICM Current Requirements: Varies based on wire path length — Nominal Current Draw is 0.33 mA on 5,000 feet (1,500 meters) of wire
Grounding Requirements: Integrated Control Surge Device (ICSD) to be grounded to 50 ohms or less every 500 feet (150 meters) or 15 ICMs, whichever is less. The central control to be grounded to 10 ohms or less of resistance
Compliance: CE, FCC, UL
Environment: Working Range: 32° F to 122° F (0° C to 50° C) Storage Temperature: -40° F to 150° F (-40° C to 65° C) Operating and Storage Humidity: 100%
Dimensions: ICM: 2.23" x 1.70" (57 mm x 43 mm) ICSD: 2.00" x 1.41" (51 mm x 43 mm)
Compatibility: Rain Bird 500/550 Series Rotors, Rain Bird 551 Series Rotors, Rain Bird 700/751 Series Rotors, Rain Bird EAGLE™ 700 and 900 Series Rotors**, Rain Bird 900 Series Rotors and Rain Bird PEB, PESB, PESB-R, PGA, EFB, BPE and BPES electric valves
Maximum Wire Paths: Cirrus: 12 interfaces, 48 wire paths Nimbus: 8 interfaces, 32 wire paths Stratus II: 2 interfaces, 8 wire paths StratusLT: 1 interface, 1 wire path
* Specific System Capacity is dependent on the Central Control System
** NOTE: EAGLE™ Rotors sold before 6/2009 will have a random orientation of the ICM relative to the Selector Housing
For exact combinations of Rotors (Nozzles and Pressure Regulator), see pages 6 – 15 for correct model.
NOTE: IC Valve Kit must be ordered separately. See page 31.
For exact combinations of Valves (size), see pages 54 – 56 for correct model.
HOW TO SPECIFY — VALVES
XXX – XXX(X)SIZE100150200300
MODELPESICPESIC-REFIC-CPBPESIC
HOW TO SPECIFY — ROTORS
A – XXX – IC – XX – XXTHREADTYPEACME
MODEL551700751900950
BODYIC
PRESSURE REGULATOR70 (4.8)80 (5.5)
NOZZLESee nozzle charts for each rotor model.
IC Valve Kit Now you can get the Integrated Control Module and valve adapter preassembled and ready for installation with the IC Valve Kit.
IC System™rainbird.com/golf
IC S
YS
TE
M™
31
IC Module
For information regarding the IC System Wire Path Design, see the table in the Appendix, page 100.
* Each driver board has two-wire paths. See page 23 for the number of wire paths enabled per central control system.
IC ModuleFEATURES AND BENEFITS
Timeless Compatibility. The Integrated Control Module (ICM) is compatible with all Rain Bird golf rotors, making hardware and software updates simple and easy.
Simple to Install. Requires up to 90% less wire than traditional satellite control systems and 50% fewer splices than a traditional decoder system.
Cost Savings. Fewer splices and less wire require less time and effort to install the system.
System Database Management. The ICM offers a tear-off bar code for easy scanning into the central control system database. As soon as the ICM is connected to a live wire path with address entered, the station is operational.
Reliable Control. The IC System is a simple yet sophisticated controller. Built using Rain Bird's proven solenoid technology with on board computer redundancy.
Easier to Design. The IC System is easier to design – only simple calculations are required. It eliminates an array of troublesome considerations – there are no controllers to design around or conceal and no looped wires.
Easier Maintenance. The IC System is capable of intelligent, two-way communication with each and every ICM and IC CONNECT on the golf course.
Dependable. The IC System is designed to always turn off if problems occur. When the wire path is damaged or cut, or if central control communication is lost, the ICM is designed to turn off automatically with built-in redundancy.
True “Below 30 Volt Control System”. As the IC System wire path output is 28.5 Volt, the IC System is a “true less than 30 Volt” control system. A lower than 30 Volt system is considered a low voltage system and is typically not subjected to code requirements regarding deep burial of the wire path.
Below Ground Control. Since the ICM is built right into the rotor or valve, the entire control system is below ground. Unlike field controller systems, the below-ground system offers protection against damage from vandalism, flooding and wildlife.
Golf Course Aesthetics. Since the IC System control is designed to be entirely below ground, the golf course vistas are clear of irrigation components as envisioned by the golf course designer.
Central Control “Smart Features”. With the IC System, you have the ability to utilize all of Rain Bird’s Central Control “Smart Features” including: Minimum ET,™ Smart Weather,™ Smart Pump™ mapping with custom graphics, and superior monitoring of system operation.
Surge Resistance. Each ICM has 20kV of onboard surge resistance standard.
HOW TO SPECIFY — ICI
ICI – XXXX – XXXMODELICI
STATION COUNT
1500 = 1 Driver Board*
3000 = 2 Driver Boards*
POWER100 = 100 VAC 120 = 120 VAC230 = 230 VAC
IC System™IC
SY
ST
EM
™
32
IC CONNECT™
IC CONNECT™IC CONNECT allows you to feed more data into your system with IC-IN and remotely control field equipment
using IC-OUT.
FEATURES AND BENEFITS
Simple and Elegant Design. IC-IN can be connected to any IC System MAXI® wire path (wire path can be shared with multiple ICM, IC-OUT or IC-IN devices).
• Each IC-IN is equivalent to 15 ICMs and each IC-OUT is equivalent to 1 ICM towards the maximum 750 ICMs per MAXI wire path
• Each IC-IN and IC-OUT is equivalent to 1 ICM for determining placement of ICSD surge protection devices
• Built-in 20kV surge protection
Hybrid Capabilities. When connected to an ICI interface, IC-IN and IC-OUT can be used in a hybrid design configuration with Satellite field controllers and/or decoders.
SPECIFICATIONS
Environment: Operating Temperature: 14° F to 125° F (-10° C to 51° C) Storage Temperature: -40° F to 150° F (-40° C to 65° C) Operating and Humidity: 75% max at 40° F to 180° F (4° C to 42° C)
IC System™ Field Wiring Voltage: 26-28.5 VAC (max)
Dimensions: Excluding Wires: 3.71" x 2.70" x 1.66" (94 mm x 69 mm x 42 mm) Wire Length: 24" (61 cm)
Sensor Types Supported: Voltage: 0-10VDC Current: 4-20mA DC
IC-IN Contact Closure: Pulse Counting: 50% duty cycle 1kHz (max) Pulses in 10 Seconds: 50% duty cycle 1kHz (max) Pulses per Second: 50% duty cycle 1kHz (max)
Wiring Connections: Red: MAXI wire Red
Black: MAXI wire Black Red/White:
IC-IN: Sensor (+) IC-OUT: Output (+) Black/White: IC-IN: Sensor (-) IC-OUT: Output (-)
IC-IN
Collect information from
multiple field sensors:• Rain cans
• Flow sensors
• Lake level sensors
HOW TO SPECIFY
IC – INMODELIC
INPUT / OUTPUTIN
IC System™rainbird.com/golf
IC S
YS
TE
M™
33
IC CONNECT™
IC ROTOR
MAXI™ WIRE
IC VALVE
Central Control Computer
IC Interface
IC-INRain Can
IC-OUT
IC-OUT
Centralize ON and OFF
control of non-irrigation products
around the facility:• Transfer pumps
• Greens fans
• Fountains and water features
• Lighting
HOW TO SPECIFY
IC – OUTMODELIC
INPUT / OUTPUTOUT
Simplified Design
By eliminating up to 90% of the wire and all decoders and satellites, IC System protects the aesthetics of your course while streamlining installation, maintenance and expansion.
Greens Fan