ic test report - lairdtechcdn.lairdtech.com/home/brandworld/files/ic rss-247, 5g b1-b4... · report...

Report No.: CR591101AN Page : 1 of 248

Report Version: Rev. 01

IC Test Report

IC : 3147A-M2US50NBT

Equipment : 802.11abgn M.2 module w/USB interface

Model No. : M2US50NBT

Brand Name : Laird Technologies

Applicant : Laird Technologies

Address : 11160 Thompson Ave., Lenexa, Kansas 66219, USA

Standard : RSS-247 Issue 1 May 2015

Received Date : Sep. 11, 2015

Tested Date : Nov. 30, 2015 ~ Jan. 11, 2016

We, International Certification Corp., would like to declare that the tested sample has been evaluated and in compliance with the requirement of the above standards. The test results contained in this report refer exclusively to the product. It may be duplicated completely for legal use with the approval of the applicant. It shall not be reproduced except in full without the written approval of our laboratory. Approved & Reviewed by:

Gary Chang / Manager Ty: XXX



Table of Contents 1 GENERAL DESCRIPTION .................................................................................................................... 5

1.1 Information .............................................................................................................................................. 5 1.2 Local Support Equipment List ................................................................................................................ 9 1.3 Test Setup Chart .................................................................................................................................... 9 1.4 The Equipment List .............................................................................................................................. 10 1.5 Testing Applied Standards ................................................................................................................... 11 1.6 Measurement Uncertainty .................................................................................................................... 11

2 TEST CONFIGURATION ..................................................................................................................... 12

2.1 Testing Condition ................................................................................................................................. 12 2.2 The Worst Test Modes and Channel Details ....................................................................................... 12

3 TRANSMITTER TEST RESULTS ........................................................................................................ 14

3.1 Conducted Emissions ........................................................................................................................... 14 3.2 Emission Bandwidth ............................................................................................................................. 19 3.3 RF Output Power .................................................................................................................................. 23 3.4 Peak Power Spectral Density ............................................................................................................... 26 3.5 Transmitter Radiated and Band Edge Emissions ................................................................................ 32

3.6 Frequency Stability (Reference only) ................................................................................................. 245

4 TEST LABORATORY INFORMATION ............................................................................................. 248



Release Record

Report No. Version Description Issued Date

CR591101AN Rev. 01 Initial issue Feb. 16, 2016



Summary of Test Results

IC Rules Test Items Measured Result

8.8 of RSS-Gen Conducted Emissions [dBuV]: 20.056MHz 22.01 (Margin -27.99dB) - AV

Pass

6.2.1(2) of RSS-247

6.2.4(2) of RSS-247 Radiated Emissions

[dBuV/m at 3m]: 11570.00MHz 53.80 (Margin -0.20dB) - AV

Pass

6.2.1(1) of RSS-247 Emission Bandwidth Meet the requirement of limit Pass

6.2.4(1) of RSS-247 6dB bandwidth Meet the requirement of limit Pass

6.2.1(1) of RSS-247

6.2.4(1) of RSS-247 RF Output Power

Max Power [dBm]: 5150~5250MHz: 18.85 5250~5350MHz: 21.50

5470~5725MHz: 21.80

5725~5850MHz: 20.80

Pass

6.2.1(1) of RSS-247

6.2.4(1) of RSS-247 Peak Power Spectral Density Meet the requirement of limit Pass

--- Frequency Stability Meet the requirement of limit Pass

--- Antenna Requirement Meet the requirement of limit Pass



1 General Description

1.1 Information

1.1.1 Specification of the Equipment under Test (EUT)

RF General Information

Frequency Range (MHz)

IEEE Std. 802.11

Ch. Freq. (MHz) Channel Number

Transmit Chains (NTX)

Data Rate / MCS

5150-5250 5250-5350 5470-5725 5725-5850

a

5180-5240 5260-5320 5500-5700 5745-5825

36-48 [4] 52-64 [4]

100-140 [8] 149-165 [5]

1 2

6-54 Mbps

5150-5250 5250-5350 5470-5725 5725-5850

n (HT20)

5180-5240 5260-5320 5500-5700 5745-5825

36-48 [4] 52-64 [4]

100-140 [8] 149-165 [5]

1 2 2

MCS 0-7 MCS 0-7 MCS 8-15

5150-5250 5250-5350 5470-5725 5725-5850

n (HT40)

5190-5230 5270-5310 5510-5670 5755-5795

38-46 [2] 54-62 [2]

102-134 [3] 151-159 [2]

1 2 2

MCS 0-7 MCS 0-7 MCS 8-15

Note 1: RF output power specifies that Maximum Conducted Output Power. Note 2: 802.11a/n uses a combination of OFDM-BPSK, QPSK, 16QAM, 64QAM modulation. Note 3: The device supports TX antenna diversity function. The conducted power of single chain is same for

1TX and 2TX operating mode. Therefore, Ant1+Ant2 configuration is chosen for final testing.

1.1.2 Antenna Details

Ant. No.

Model Type Connector Operating Frequencies (MHz) / Antenna Gain (dBi)

2400~2483.5 5150~5250 5250~5350 5470~5725 5725~5850

1 Laird

MAF94051 Dipole RP-SMA 2.1 2.4 2.6 3.4 3.4

2 Laird

NanoBlade-IP04 PCB Dipole IPEX MHF 2 3.9 3.9 4 4

3 Laird

MAF95310 Mini NanoBlade Flex

PCB Dipole IPEX MHF 2.79 3.38 3.38 3.38 3.38

4 Laird

NanoBlue-IP04 PCB Dipole IPEX MHF 2 --- --- --- ---

5 Ethertronics

WLAN_1000146

Isolated Magnetic

Dipole IPEX MHF 2.5 3.5 3.5 3.5 3.5

Note: Ant. No. 1, 3 & 5 were for 2.4G final test.

Note: Ant. No. 1, 2 & 5 were for 5G final test.



1.1.3 Power Supply Type of Equipment under Test (EUT)

Power Supply Type 3.3Vdc from host

1.1.4 Accessories

N/A

1.1.5 Channel List

802.11 a / HT20 HT40

Channel Frequency(MHz) Channel Frequency(MHz)

36 5180 38 5190

40 5200 46 5230

44 5220 54 5270

48 5240 62 5310

52 5260 102 5510

56 5280 110 5550

60 5300 134 5670

64 5320 151 5755

100 5500 159 5795

104 5520 --- ---

108 5540 --- ---

112 5560 --- ---

116 5580 --- ---

132 5660 --- ---

136 5680 --- ---

140 5700 --- ---

149 5745 --- ---

153 5765 --- ---

157 5785 --- ---

161 5805 --- ---

165 5825 --- ---



1.1.6 Test Tool and Duty Cycle

Test Tool ART2 GUI, V2.3

Duty Cycle and Duty Factor

Mode Duty cycle (%) Duty factor (dB)

11a 99.16% 0.04

HT20 99.10% 0.04

HT40 98.05% 0.09

1.1.7 Power Setting

For Frequency band 5150-5250 MHz

Modulation Mode Test Frequency (MHz) Power Set

11a 5180 14

11a 5200 14

11a 5240 14

HT20 5180 14

HT20 5200 14

HT20 5240 14

HT40 5190 16.5

HT40 5230 17

For Frequency band 5250~5350 MHz


11a 5260 19.5

11a 5300 19.5

11a 5320 19.5

HT20 5260 19.5

HT20 5300 19.5

HT20 5320 19.5

HT40 5270 20.5

HT40 5310 18





11a 5500 18

11a 5580 19

11a 5700 17

HT20 5500 17.5

HT20 5580 19

HT20 5700 17

HT40 5510 16.5

HT40 5550 21

HT40 5670 19



11a 5745 19

11a 5785 21

11a 5825 22

HT20 5745 18.5

HT20 5785 21

HT20 5825 22

HT40 5755 17

HT40 5795 20.5



1.2 Local Support Equipment List

Support Equipment List

No. Equipment Brand Model S/N FCC ID Signal cable / Length (m)

1 DC Power

Supply GW INSTEK GPC-3060D EM884797 --- ---

2 Notebook DELL Latitude E6430

9ZFB4X1 DoC ---

3 Fixture --- --- --- --- ---

Note: Fixture is provided by applicant.

1.3 Test Setup Chart

Test Setup Diagram

Note: The support notebook was disconnected from EUT and removed from test table when EUT is set to transmit continuously.



1.4 The Equipment List

Test Item Conducted Emission

Test Site Conduction room 1 / (CO01-WS)

Tested Date Jan. 06, 2016

Instrument Manufacturer Model No. Serial No. Calibration Date Calibration Until

EMC Receiver R&S ESCS 30 100169 Oct. 21, 2015 Oct. 20, 2016

LISN SCHWARZBECK Schwarzbeck 8127 8127-667 Nov. 13, 2015 Nov. 12, 2016

RF Cable-CON EMC EMCCFD300-BM-BM-6000 50821 Dec. 21, 2015 Dec. 20, 2016

Measurement Software

AUDIX e3 6.120210k NA NA

Note: Calibration Interval of instruments listed above is one year.

Test Item Radiated Emission

Test Site 966 chamber 3 / (03CH03-WS)

Tested Date Nov. 30 ~ Dec. 22, 2015


Spectrum Analyzer

Agilent N9010A MY53400091 Sep. 14, 2015 Sep. 13, 2016

Receiver Agilent N9038A MY53290044 Oct. 14, 2015 Oct. 13, 2016

Bilog Antenna SCHWARZBECK VULB9168 VULB9168-563 Dec. 30, 2014 Dec. 29, 2015

Horn Antenna 1G-18G

SCHWARZBECK BBHA 9120 D BBHA 9120 D 1206 Feb. 03, 2015 Feb. 02, 2016

Horn Antenna 18G-40G

SCHWARZBECK BBHA 9170 BBHA 9170517 Nov. 04, 2015 Nov. 03, 2016

Preamplifier EMC EMC02325 980187 Sep. 21, 2015 Sep. 20, 2016

Preamplifier Agilent 83017A MY53270014 Sep. 07, 2015 Sep. 06, 2016

Preamplifier EMC EMC184045B 980192 Sep. 01, 2015 Aug. 31, 2016

RF cable-3M HUBER+SUHNER SUCOFLEX104 MY22620/4 Feb. 09, 2015 Feb. 08, 2016



LF cable-0.8M EMC EMC8D-NM-NM-800 EMC8D-NM-NM-800-001 Feb. 09, 2015 Feb. 08, 2016

LF cable-3M EMC EMC8D-NM-NM-3000 131103 Feb. 09, 2015 Feb. 08, 2016

LF cable-13M EMC EMC8D-NM-NM-13000 131104 Feb. 09, 2015 Feb. 08, 2016


AUDIX e3 6.120210g NA NA




Test Item RF Conducted

Test Site (TH01-WS)

Tested Date Jan. 09 ~ Jan. 11, 2016


Spectrum Analyzer R&S FSV40 101063 Feb. 03, 2015 Feb. 02, 2016

TEMP&HUMIDITY CHAMBER

GIANT FORCE GCT-225-40-SP-SD MAF1212-002 Nov. 27, 2015 Nov. 26, 2016

Power Meter Anritsu ML2495A 1241002 Sep. 21, 2015 Sep. 20, 2016

Power Sensor Anritsu MA2411B 1207366 Sep. 21, 2015 Sep. 20, 2016

DC POWER SOURCE

GW INSTEK GPC-3060D EM884797 Oct. 20, 2015 Oct. 19, 2016


Sporton Sporton_1 1.3.30 NA NA


1.5 Testing Applied Standards

According to the specification of EUT, the EUT must comply with following standards and KDB documents.

RSS-247 Issue 1 May 2015

RSS-Gen Issue 4 November 2014

ANSI C63.10-2013

ANSI C63.4-2014

FCC KDB 789033 D02 General UNII Test Procedures New Rules v01r01

FCC KDB 644545 D03 Guidance for IEEE 802 11ac New Rules v01

FCC KDB 662911 D01 Multiple Transmitter Output v02r01

FCC KDB 412172 D01 Determining ERP and EIRP v01r01

1.6 Measurement Uncertainty

ISO/IEC 17025 requires that an estimate of the measurement uncertainties associated with the emissions test results be included in the report. The measurement uncertainties given below are based on a 95% confidence level (based on a coverage factor (k=2)

Measurement Uncertainty

Parameters Uncertainty

Bandwidth ±34.134 Hz

Conducted power ±0.808 dB

Frequency error ±34.134 Hz

Power density ±0.463 dB

Conducted emission ±2.670 dB

AC conducted emission ±2.92 dB

Radiated emission ≤ 1GHz ±3.66 dB

Radiated emission > 1GHz ±5.37 dB

Time ±0.1%

Temperature ±0.6 oC



2 Test Configuration

2.1 Testing Condition

Test Item Test Site Ambient Condition Tested By

AC Conduction CO01-WS 20°C / 60% Peter Lin

Radiated Emissions 03CH03-WS 22°C / 61-64% Anderson Hong

Felix Sung

RF Conducted TH01-WS 21°C / 64% Alex Huang

FCC site registration No.: 390588

IC site registration No.: 10807C-1

2.2 The Worst Test Modes and Channel Details

Frequency band 5150~5350 MHz / 5470~5725 MHz

Test item Modulation

Mode Test Frequency

(MHz) Data Rate

Test Configuration

Conducted Emissions HT40 5550 MCS 0 2

Radiated Emissions ≤1GHz HT40 5550 MCS 0 1, 2, 3

Radiated Emissions >1GHz

11a 5180 / 5200 / 5240 / 5260 / 5300 5320 / 5500 / 5580 / 5700

6 Mbps

1, 2, 3 HT20 5180 / 5200 / 5240 / 5260 / 5300 5320 / 5500 / 5580 / 5700

MCS 0

HT40 5190 / 5230/ 5270 / 5310 / 5510 5550 / 5670

MCS 0

RF Output Power

Emission Bandwidth

Peak Power Spectral Density

11a 5180 / 5200 / 5240 / 5260 / 5300 5320 / 5500 / 5580 / 5700

6 Mbps

2 HT20 5180 / 5200 / 5240 / 5260 / 5300 5320 / 5500 / 5580 / 5700

MCS 0

HT40 5190 / 5230/ 5270 / 5310 / 5510 5550 / 5670

MCS 0

Frequency Stability Un-modulation 5320 --- ---

NOTE:

1. The EUT was pretested with 3 orientations placed on the table for the radiated emission measurement – X, Y, and Z-plane. The Y-plane results were found as the worst case and were shown in this report.

2. The following antennas are used for final testing for this module: (See item 1.1.2 for more details.)

1) Configuration 1 : Dipole antenna

2) Configuration 2 : PCB Dipole antenna

3) Configuration 3 : Isolated Magnetic Dipole antenna



Frequency band 5725-5850 MHz

Test item Modulation

Mode Test Frequency

(MHz) Data Rate

Test Configuration

Conducted Emissions 11a 5785 6 Mbps 2

Radiated Emissions ≤1GHz 11a 5785 6 Mbps 1, 2, 3

Radiated Emissions >1GHz

11a 5745 / 5785 / 5825 6 Mbps

1, 2, 3 HT20 5745 / 5785 / 5825 MCS 0

HT40 5755 / 5795 MCS 0

RF Output Power

Emission Bandwidth

6dB bandwidth

Peak Power Spectral Density

11a 5745 / 5785 / 5825 6 Mbps

2 HT20 5745 / 5785 / 5825 MCS 0

HT40 5755 / 5795 MCS 0

Frequency Stability Un-modulation 5785 --- ---

NOTE:

1. The EUT was pretested with 3 orientations placed on the table for the radiated emission measurement – X, Y, and Z-plane. The Y-plane results were found as the worst case and were shown in this report.

2. The following antennas are used for final testing for this module: (See item 1.1.2 for more details.)

1) Configuration 1 : Dipole antenna

2) Configuration 2 : PCB Dipole antenna

3) Configuration 3 : Isolated Magnetic Dipole antenna



3 Transmitter Test Results

3.1 Conducted Emissions

3.1.1 Limit of Conducted Emissions

Conducted Emissions Limit

Frequency Emission (MHz) Quasi-Peak Average

0.15-0.5 66 - 56 * 56 - 46 *

0.5-5 56 46

5-30 60 50

Note 1: * Decreases with the logarithm of the frequency.

3.1.2 Test Procedures

1. The device is placed on a test table, raised 80 cm above the reference ground plane. The vertical conducting plane is located 40 cm to the rear of the device.

2. The device is connected to line impedance stabilization network (LISN) and other accessories are connected to other LISN. Measured levels of AC power line conducted emission are across the 50 Ω LISN port.

3. AC conducted emission measurements is made over frequency range from 150 kHz to 30 MHz.

4. This measurement was performed with AC 120V/60Hz

3.1.3 Test Setup



3.1.4 Test Result of Conducted Emissions

Modulation HT40 Test Freq. (MHz) 5550

Power Phase Line

Note 1: Level (dBuV) = Read Level (dBuV) + LISN Factor (dB) + Cable Loss (dB). 2: Over Limit (dB) = Level (dBuV) – Limit Line (dBuV).




Power Phase Neutral




Modulation 11a Test Freq. (MHz) 5785

Power Phase Line





Power Phase Neutral




3.2 Emission Bandwidth

3.2.1 Limit of Emission Bandwidth

Within the 5.725-5.85 GHz band, the minimum 6 dB bandwidth of U-NII devices shall be at least 500 kHz.


26dB Bandwidth

1. c Set RBW = approximately 1% of the emission bandwidth.

2. Set the VBW > RBW, Detector = Peak.

3. Trace mode = max hold.

4. Measure the maximum width of the emission that is 26 dB down from the peak of the emission.

Occupied Bandwidth

1. Set RBW = 1 % to 5 % of the OBW

2. Set VBW ≥ 3 RBW

3. Sample detection and single sweep mode shall be used

4. Use the 99 % power bandwidth function of the instrument

6dB Bandwidth

1. Set RBW = 100kHz, VBW = 300kHz

2. Detector = Peak,Trace mode = max hold.

3. Allow the trace to stabilize.

4. Measure the maximum width of the emission that is constrained by the frequencies associated with the two outermost amplitude points (upper and lower frequencies) that are attenuated by 6 dB relative to the maximum level measured in the fundamental emission

3.2.3 Test Setup



3.2.4 Test Result of Emission Bandwidth

Emission Bandwidth 5150~5250 MHz

Mode NTX Freq. (MHz)

26dB Bandwidth (MHz) 99% Bandwidth (MHz) Power Limit

(dBm) Chain 0 Chain 1 Chain 2 Chain 0 Chain 1 Chain 2

11a 2 5180 20.29 20.29 --- 16.52 16.47 --- 22.17

11a 2 5200 20.41 19.94 --- 16.52 16.46 --- 22.16

11a 2 5240 20.46 19.88 --- 16.54 16.46 --- 22.16

HT20 2 5180 21.39 21.10 --- 17.63 17.61 --- 22.46

HT20 2 5200 20.99 21.28 --- 17.62 17.62 --- 22.46

HT20 2 5240 21.28 20.99 --- 17.63 17.62 --- 22.46

HT40 2 5190 43.13 42.67 --- 35.76 35.80 --- 23.00

HT40 2 5230 43.36 43.25 --- 36.00 35.96 --- 23.00





11a 2 5260 21.97 22.03 --- 16.49 16.57 --- 29.17

11a 2 5300 22.43 21.04 --- 16.56 16.51 --- 29.18

11a 2 5320 21.22 22.32 --- 16.55 16.52 --- 29.18

HT20 2 5260 21.80 22.32 --- 17.68 17.64 --- 29.46

HT20 2 5300 21.74 22.61 --- 17.67 17.64 --- 29.46

HT20 2 5320 21.57 21.91 --- 17.65 17.68 --- 29.47

HT40 2 5270 42.78 43.83 --- 35.82 35.88 --- 30.00

HT40 2 5310 43.01 42.55 --- 35.78 35.82 --- 30.00







11a 2 5500 21.10 21.68 --- 16.55 16.49 --- 29.17

11a 2 5580 25.04 26.03 --- 16.63 16.77 --- 29.21

11a 2 5700 21.04 22.03 --- 16.55 16.53 --- 29.18

HT20 2 5500 21.33 21.57 --- 17.64 17.66 --- 29.46

HT20 2 5580 22.55 27.88 --- 17.69 17.77 --- 29.48

HT20 2 5700 21.10 21.39 --- 17.64 17.65 --- 29.46

HT40 2 5510 43.36 42.78 --- 35.82 35.86 --- 30.00

HT40 2 5550 55.65 63.19 --- 36.04 36.00 --- 30.00

HT40 2 5670 44.29 51.01 --- 35.84 36.06 --- 30.00

Worst Plot of 26dB Bandwidth Worst Plot of 99% Bandwidth





OBW Bandwidth (MHz) 6dB Bandwidth (MHz)

Chain 0 Chain 1 Chain 2 Chain 3 Chain 0 Chain 1 Chain 2 Chain 3 6dB BW

Limit (MHz)

11a 2 5745 16.58 16.57 --- --- 16.35 16.06 --- --- 0.5

11a 2 5785 16.82 16.67 --- --- 15.88 15.42 --- --- 0.5

11a 2 5825 16.64 16.74 --- --- 16.35 16.29 --- --- 0.5

HT20 2 5745 17.67 17.65 --- --- 16.93 16.00 --- --- 0.5

HT20 2 5785 17.95 17.85 --- --- 16.52 16.58 --- --- 0.5

HT20 2 5825 17.72 17.87 --- --- 16.52 15.94 --- --- 0.5

HT40 2 5755 35.82 35.80 --- --- 35.13 35.01 --- --- 0.5

HT40 2 5795 36.02 35.96 --- --- 33.86 32.58 --- --- 0.5

Worst Plot of 99% Bandwidth Worst Plot of 6dB Bandwidth



3.3 RF Output Power

3.3.1 Limit of RF Output Power

Frequency Band (MHz) Limit

5150 ~ 5250 EIRP: 200mW or 10dBm+10 log B

5250 ~ 5350 Conducted Power 250mW or 11dBm+10 log B

EIRP 1W or 17dBm+10 log B

5470 ~ 5600 and 5650 ~ 5725 Conducted Power 250mW or 11dBm+10 log B

EIRP 1W or 17dBm+10 log B

5725 ~ 5850 Conducted Power: 1 W

Note: “B” is the 99% Occupied Bandwidth in MHz.


Method PM-G ( Measurement using a gated RF average power meter )

Measurements may is performed using a wideband gated RF power meter provided that the gate parameters are adjusted such that the power is measured only when the EUT is transmitting at its maximum power control level. Since the measurement is made only during the ON time of the transmitter, no duty cycle correction factor is required.

3.3.3 Test Setup



3.3.4 Test Result of Maximum Conducted Output Power

Frequency band 5150~5250 MHz


Conducted Power (dBm) Total Power (mW)

Total Power (dBm)

Antenna Gain (dBi)

E.I.R.P (dBm)

E.I.R.P limit

(dBm) Chain 0 Chain 1 Chain 2 Chain 3

11a 2 5180 11.12 12.01 --- --- 28.827 14.60 3.90 18.50 22.17

11a 2 5200 11.11 12.35 --- --- 30.091 14.78 3.90 18.68 22.16

11a 2 5240 11.32 12.16 --- --- 29.996 14.77 3.90 18.67 22.16

HT20 2 5180 11.16 12.11 --- --- 29.317 14.67 3.90 18.57 22.46

HT20 2 5200 11.21 12.36 --- --- 30.432 14.83 3.90 18.73 22.46

HT20 2 5240 11.29 12.06 --- --- 29.528 14.70 3.90 18.60 22.46

HT40 2 5190 14.32 14.01 --- --- 52.216 17.18 3.90 21.08 23.00

HT40 2 5230 15.43 16.21 --- --- 76.697 18.85 3.90 22.75 23.00

Frequency band 5250~5350 MHz



Total Power (dBm)

Limit (dBm)

Antenna Gain (dBi)

E.I.R.P (dBm)

E.I.R.P limit


11a 2 5260 18.04 18.13 --- --- 128.693 21.10 23.17 3.90 25.00 29.17

11a 2 5300 18.02 18.04 --- --- 127.067 21.04 23.18 3.90 24.94 29.18

11a 2 5320 18.12 18.19 --- --- 130.781 21.17 23.18 3.90 25.07 29.18

HT20 2 5260 18.03 18.09 --- --- 127.950 21.07 23.46 3.90 24.97 29.46

HT20 2 5300 18.03 18.03 --- --- 127.066 21.04 23.46 3.90 24.94 29.46

HT20 2 5320 18.02 18.13 --- --- 128.400 21.09 23.47 3.90 24.99 29.47

HT40 2 5270 18.34 18.64 --- --- 141.348 21.50 24.00 3.90 25.40 30.00

HT40 2 5310 16.32 17.56 --- --- 99.871 19.99 24.00 3.90 23.89 30.00

Frequency band 5470 ~ 5725 MHz



Total Power (dBm)

Limit (dBm)

Antenna Gain (dBi)

E.I.R.P (dBm)

E.I.R.P limit


11a 2 5500 16.23 17.12 --- --- 93.499 19.71 23.17 4.00 23.71 29.17

11a 2 5580 18.01 17.82 --- --- 123.775 20.93 23.21 4.00 24.93 29.21

11a 2 5700 15.21 15.68 --- --- 70.172 18.46 23.18 4.00 22.46 29.18

HT20 2 5500 16.54 16.31 --- --- 87.838 19.44 23.46 4.00 23.44 29.46

HT20 2 5580 17.56 17.62 --- --- 114.826 20.60 23.48 4.00 24.60 29.48

HT20 2 5700 14.32 14.43 --- --- 54.773 17.39 23.46 4.00 21.39 29.46

HT40 2 5510 15.71 16.02 --- --- 77.234 18.88 24.00 4.00 22.88 30.00

HT40 2 5550 18.92 18.66 --- --- 151.434 21.80 24.00 4.00 25.80 30.00

HT40 2 5670 17.45 17.02 --- --- 105.940 20.25 24.00 4.00 24.25 30.00




Mode NTX Freq. (MHz) Conducted Power (dBm) Total

Power (mW)

Total Power (dBm)

Limit (dBm) Chain 0 Chain 1 Chain 2 Chain 3

11a 2 5745 16.22 15.61 --- --- 78.271 18.94 30.00

11a 2 5785 18.03 17.54 --- --- 120.288 20.80 30.00

11a 2 5825 17.48 17.4 --- --- 110.930 20.45 30.00

HT20 2 5745 15.58 15.23 --- --- 69.484 18.42 30.00

HT20 2 5785 17.62 17.51 --- --- 114.173 20.58 30.00

HT20 2 5825 17.71 17.02 --- --- 109.370 20.39 30.00

HT40 2 5755 14.85 14.48 --- --- 58.604 17.68 30.00

HT40 2 5795 17.45 16.32 --- --- 98.445 19.93 30.00



3.4 Peak Power Spectral Density

3.4.1 Limit of Peak Power Spectral Density

Frequency Band (MHz) Limit

5150 ~ 5250 The e.i.r.p. spectral density shall not exceed 10 dBm in any 1.0 MHz band.

5250 ~ 5350 The power spectral density shall not exceed 11 dBm in any 1.0 MHz band

5470 ~ 5600 and 5650 ~ 5725

The power spectral density shall not exceed 11 dBm in any 1.0 MHz band

5725 ~ 5850 The power spectral density shall not exceed 30 dBm in any 500 kHz band.


For 5150~5250 MHz, 5250~5350 MHz, 5470~5725 MHz

Method SA-1

1. Set RBW = 1 MHz, VBW = 3 MHz, Sweep time = auto, Detector = RMS.

2. Trace average 100 traces.

3. Use the peak marker function to determine the maximum amplitude level.

Method SA-2 Alternative

1. Set RBW = 1 MHz, VBW = 3 MHz, Detector = RMS.

2. Set sweep time ≥ 10 * (number of points in sweep) * (total on/off period of the transmitted signal).

3. Perform a single sweep.


5. Add 10 log(1/x), where x is the duty cycle.

For 5725~5850 MHz

Method SA-1

1. Set RBW = 500 kHz, VBW = 2 MHz, Sweep time = auto, Detector = RMS.

2. Trace average 100 traces.


Method SA-2 Alternative

1. Set RBW = 500 kHz, VBW = 2 MHz, Detector = RMS.

2. Set sweep time ≥ 10 * (number of points in sweep) * (total on/off period of the transmitted signal).

3. Perform a single sweep.


5. Add 10 log(1/x), where x is the duty cycle.



3.4.3 Test Setup



3.4.4 Test Result of Peak Power Spectral Density

Condition Peak Power Spectral Density (dBm)

Mode NTX Freq. (MHz) PPSD

w/o D.F (dBm)

Duty Factor (dB)

PPSD with D.F (dBm)

Ant. Gain (dBi)

E.I.R.P PSD

(dBm)

E.I.R.P PSD limit

(dBm)

11a 2 5180 2.36 0.00 2.36 6.91 9.27 10

11a 2 5200 2.82 0.00 2.82 6.91 9.73 10

11a 2 5240 2.75 0.00 2.75 6.91 9.66 10

HT20 2 5180 2.29 0.00 2.29 6.91 9.20 10

HT20 2 5200 2.34 0.00 2.34 6.91 9.25 10

HT20 2 5240 2.60 0.00 2.60 6.91 9.51 10

HT40 2 5190 1.35 0.00 1.35 6.91 8.26 10

HT40 2 5230 2.99 0.00 2.99 6.91 9.90 10



w/o D.F (dBm)

Duty Factor (dB)

PPSD with D.F (dBm)

Limit (dBm)

Ant. Gain (dBi)

E.I.R.P PSD

(dBm)

E.I.R.P PSD limit

(dBm)

11a 2 5260 7.00 0.00 7.00 10.09 6.91 13.91 17

11a 2 5300 7.42 0.00 7.42 10.09 6.91 14.33 17

11a 2 5320 7.57 0.00 7.57 10.09 6.91 14.48 17

HT20 2 5260 7.60 0.00 7.60 10.09 6.91 14.51 17

HT20 2 5300 7.32 0.00 7.32 10.09 6.91 14.23 17

HT20 2 5320 7.37 0.00 7.37 10.09 6.91 14.28 17

HT40 2 5270 4.89 0.00 4.89 10.09 6.91 11.80 17

HT40 2 5310 3.53 0.00 3.53 10.09 6.91 10.44 17

Note: 1. D.F is duty factor.

2. Test result is bin-by-bin summing measured value of each TX port.

3. Directional gain = 3.9 + 10 * log(2/1) = 6.91 dBi





w/o D.F (dBm)

Duty Factor (dB)

PPSD with D.F (dBm)

Limit (dBm)

Ant. Gain (dBi)

E.I.R.P PSD

(dBm)

E.I.R.P PSD limit

(dBm)

11a 2 5500 6.13 0.00 6.13 9.99 7.01 13.14 17

11a 2 5580 7.23 0.00 7.23 9.99 7.01 14.24 17

11a 2 5700 4.76 0.00 4.76 9.99 7.01 11.77 17

HT20 2 5500 5.51 0.00 5.51 9.99 7.01 12.52 17

HT20 2 5580 6.53 0.00 6.53 9.99 7.01 13.54 17

HT20 2 5700 3.26 0.00 3.26 9.99 7.01 10.27 17

HT40 2 5510 3.57 0.00 3.57 9.99 7.01 10.58 17

HT40 2 5550 3.16 0.00 3.16 9.99 7.01 10.17 17

HT40 2 5670 3.47 0.00 3.47 9.99 7.01 10.48 17



3. Directional gain = 4 + 10 * log(2/1) = 7.01 dBi

Worst Plot



Frequency band 5725-5850 MHz

Condition Peak Power Spectral Density (dBm/500kHz)


w/o D.F (dBm/500kHz)

Duty Factor (dB)

PPSD with D.F

(dBm/500kHz)

PPSD Limit (dBm/500kHz)

11a 2 5745 3.94 0.00 3.94 28.99

11a 2 5785 5.35 0.00 5.35 28.99

11a 2 5825 5.18 0.00 5.18 28.99

HT20 2 5745 3.43 0.00 3.43 28.99

HT20 2 5785 5.31 0.00 5.31 28.99

HT20 2 5825 4.94 0.00 4.94 28.99

HT40 2 5755 0.05 0.00 0.05 28.99

HT40 2 5795 2.42 0.00 2.42 28.99



3. Directional gain = 4 + 10 * log(2/1) = 7.01 dBi > 6 dBi.

For 5745~5825MHz: Limit shall be reduced to 30 dBm – (7.01 dBi – 6 dBi) = 28.99 dBm.

Worst Plot



3.4.5 Test Result of Peak Power Spectral Density for RSS-247 section 6.2.2

This item is to meet requirement of RSS-247 section 6.2.2(2)(i)(b) for devices with both operating frequencies and channel bandwidths contained within the band 5250-5350 MHz.

E.I.R.P. PSD for channels into 5150~5250MHz Band



w/o D.F (dBm)

Duty Factor (dB)

PPSD with D.F (dBm)

PPSD Limit (dBm)

Ant. Gain (dBi)

E.I.R.P PSD

(dBm)

E.I.R.P PSD limit

(dBm)

11a 2 5260 -19.03 0.00 -19.03 - 6.91 -12.12 10

11a 2 5300 -42.94 0.00 -42.94 - 6.91 -36.03 10

11a 2 5320 -43.15 0.00 -43.15 - 6.91 -36.24 10

HT20 2 5260 -17.29 0.00 -17.29 - 6.91 -10.38 10

HT20 2 5300 -42.94 0.00 -42.94 - 6.91 -36.03 10

HT20 2 5320 -43.19 0.00 -43.19 - 6.91 -36.28 10

HT40 2 5270 -17.90 0.00 -17.90 - 6.91 -10.99 10

HT40 2 5310 -42.30 0.00 -42.30 - 6.91 -35.39 10

Note: 1. D.F is duty factor. 2. Test result is bin-by-bin summing measured value of each TX port. 3. Directional gain = 3.9 + 10 * log(2/1) = 6.91 dBi

Worst Plot



3.5 Transmitter Radiated and Band Edge Emissions

3.5.1 Limit of Transmitter Radiated and Band Edge Emissions

Restricted Band Emissions Limit

Frequency Range (MHz) Field Strength (uV/m) Field Strength (dBuV/m) Measure Distance (m)

0.009~0.490 2400/F(kHz) 48.5 - 13.8 300

0.490~1.705 24000/F(kHz) 33.8 - 23 30

1.705~30.0 30 29 30

30~88 100 40 3

88~216 150 43.5 3

216~960 200 46 3

Above 960 500 54 3

Note 1:

Qusai-Peak value is measured for frequency below 1GHz except for 9–90 kHz, 110–490 kHz frequency band. Peak and average value are measured for frequency above 1GHz. The limit on average radio frequency emission is as above table. The limit on peak radio frequency emissions is 20 dB above the maximum permitted average emission limit Note 2:

Measurements may be performed at a distance other than what is specified provided. When performing measurements at a distance other than that specified, the results shall be extrapolated to the specified distance using an extrapolation factor as below, Frequency at or above 30 MHz: 20 dB/decade Frequency below 30 MHz: 40 dB/decade.

Un-restricted band emissions above 1GHz Limit

Operating Band Limit

5.15 - 5.25 GHz e.i.r.p. -27 dBm [68.2 dBuV/m@3m]



5.725 - 5.850 GHz 5.715 5.725 GHz: e.i.r.p. -17 dBm [78.2 dBuV/m@3m] 5.825 5.835 GHz: e.i.r.p. -17 dBm [78.2 dBuV/m@3m]

Other un-restricted band: e.i.r.p. -27 dBm [68.2 dBuV/m@3m]

Note 1: Measurements may be performed at a distance other than the limit distance provided they are not performed in the near field and the emissions to be measured can be detected by the measurement equipment. When performing measurements at a distance other than that specified, the results shall be extrapolated to the specified distance using an extrapolation factor of 20 dB/decade (inverse of linear distance for field-strength measurements, inverse of linear distance-squared for power-density measurements).




1. Measurement is made at a semi-anechoic chamber that incorporates a turntable allowing a EUT

rotation of 360°. A continuously-rotating, remotely-controlled turntable is installed at the test site to

support the EUT and facilitate determination of the direction of maximum radiation for each EUT emission frequency. The EUT is placed at test table. For emissions testing at or below 1 GHz, the table height is 80 cm above the reference ground plane. For emission measurements above 1 GHz, the table height is 1.5 m

2. Measurement is made with the antenna positioned in both the horizontal and vertical planes of polarization. The measurement antenna is varied in height (1m ~ 4m) above the reference ground plane to obtain the maximum signal strength. Distance between EUT and antenna is 3 m.

3. This investigation is performed with the EUT rotated 360°, the antenna height scanned between 1 m

and 4 m, and the antenna rotated to repeat the measurements for both the horizontal and vertical antenna polarizations.

Note:

1. 120kHz measurement bandwidth of test receiver and Quasi-peak detector is for radiated emission below 1GHz.

2. RBW=1MHz, VBW=3MHz and Peak detector is for peak measured value of radiated emission above 1GHz.

3. RBW=1MHz, VBW=1/T and Peak detector is for average measured value of radiated emission above 1GHz.



3.5.3 Test Setup

Radiated Emissions below 1 GHz

Radiated Emissions above 1 GHz



Test Configuration 1: Dipole antenna

3.5.4 Transmitter Radiated Unwanted Emissions (Below 1GHz)


Polarization Horizontal Test Configuration 1

Note 1: Emission Level (dBuV/m) = SA Reading (dBuV/m) + Factor* (dB) *Factor includes antenna factor , cable loss and amplifier gain

Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m). Note 3: All spurious emissions below 30MHz are more than 20 dB below the limit.




Polarization Vertical Test Configuration 1





3.5.5 Transmitter Radiated Unwanted Emissions (Above 1GHz) for 11a




Note 2: Margin (dB) = Emission level (dBuV/m) – Limit (dBuV/m).



3.5.6 Transmitter Radiated Unwanted Emissions (Above 1GHz) for HT20







Test Configuration 2: PCB Dipole antenna








Test Configuration 3: Isolated Magnetic Dipole antenna








3.6 Frequency Stability (Reference only)


1. The EUT is installed in an environment test chamber with external power source.

2. Set the chamber to operate at 50 centigrade and external power source to output at nominal voltage of EUT.

3. A sufficient stabilization period at each temperature is used prior to each frequency measurement.

4. When temperature is stabled, measure the frequency stability.

5. The test shall be performed under -40 to 85 centigrade and 85 to 115 percent of the nominal voltage. Change setting of chamber and external power source to complete all conditions.

3.6.2 Test Setup



3.6.3 Test Result of Frequency Stability

Frequency: 5320 MHz

Frequency Drift (ppm)

Temperature (oC) 0 minute 2 minutes 5 minutes 10 minutes

T20°CVmax -0.11 0.48 0.59 0.35

T20°CVmin 0.35 0.77 0.61 0.17

T85°CVnom -0.05 0.16 0.36 0.25

T80°CVnom 0.33 0.33 0.32 0.11

T70°CVnom -0.20 0.04 -0.34 -0.12

T60°CVnom 0.39 0.98 0.13 0.78

T50CVnom 1.00 1.56 1.07 1.45

T40°CVnom 0.13 0.56 0.87 0.36

T30°CVnom 0.33 0.64 0.45 0.53

T20°CVnom 0.27 0.91 0.12 0.30

T10°CVnom 0.18 0.30 0.70 0.54

T0°CVnom 0.50 0.68 0.28 0.81

T-10°CVnom 0.57 0.98 0.31 0.73

T-20°CVnom 0.74 0.48 0.66 1.18

T-30°CVnom 0.33 -0.06 0.70 0.59

T-40°CVnom -0.11 0.37 -0.09 -0.10

Vnom [Vdc]: 3.3 Vmax [Vdc]: 3.795 Vmin [Vdc]: 2.805

Tnom [°C]: 20 Tmax [°C]: 85 Tmin [°C]: -40



Frequency: 5785 MHz

Frequency Drift (ppm)

Temperature (oC) 0 minute 2 minutes 5 minutes 10 minutes

T20°CVmax 5.53 5.74 6.26 5.78

T20°CVmin 3.91 3.93 4.34 4.50

T85°CVnom 4.41 5.22 4.38 4.17

T80°CVnom 2.85 3.23 3.01 2.62

T70°CVnom 2.61 2.69 2.17 2.39

T60°CVnom 2.94 3.22 2.91 2.67

T50CVnom 2.77 2.72 3.13 2.37

T40°CVnom 2.82 2.69 3.11 2.92

T30°CVnom 2.07 2.60 2.55 1.76

T20°CVnom 1.05 1.13 0.85 0.95

T10°CVnom 0.90 0.89 0.69 0.62

T0°CVnom 0.67 0.68 0.77 1.35

T-10°CVnom 5.82 6.10 6.04 5.98

T-20°CVnom 4.22 4.78 4.76 4.20

T-30°CVnom 4.62 4.45 4.97 4.57

T-40°CVnom 3.16 3.23 3.19 3.46

Vnom [Vdc]: 3.3 Vmax [Vdc]: 3.795 Vmin [Vdc]: 2.805

Tnom [°C]: 20 Tmax [°C]: 85 Tmin [°C]: -40



4 Test laboratory information

Established in 2012, ICC provides foremost EMC & RF Testing and advisory consultation services by our

skilled engineers and technicians. Our services employ a wide variety of advanced edge test equipment and

one of the widest certification extents in the business.

International Certification Corp, it is our definitive objective is to institute long term, trust-based associations

with our clients. The expectation we set up with our clients is based on outstanding service, practical expertise

and devotion to a certified value structure. Our passion is to grant our clients with best EMC / RF services by

oriented knowledgeable and accommodating staff.

Our Test sites are located at Linkou District and Kwei Shan Hsiang. Location map can be found on our

website http://www.icertifi.com.tw.

Linkou Kwei Shan Kwei Shan Site II

Tel: 886-2-2601-1640 Tel: 886-3-271-8666 Tel: 886-3-271-8640

No. 30-2, Ding Fwu Tsuen, Lin Kou District, New Taipei City, Taiwan, R.O.C.

No. 3-1, Lane 6, Wen San 3rd St., Kwei Shan Hsiang, Tao Yuan Hsien 333, Taiwan, R.O.C.

No. 14-1, Lane 19, Wen San 3rd St., Kwei Shan Hsiang, Tao Yuan Hsien 333, Taiwan, R.O.C.

If you have any suggestion, please feel free to contact us as below information

Tel: 886-3-271-8666

Fax: 886-3-318-0155

Email: [email protected]

══END══

http://www.icertifi.com.tw/

mailto:[email protected]

ic test report - lairdtechcdn.lairdtech.com/home/brandworld/files/ic rss-247, 5g b1-b4... · report...

Documents