8/6/2019 ICCPM 2011 Template

1/2

Framework for Measuring Quality of Design Process in EngineeringConsultant Firms

John Surname 1, Esther Surname 2 and Author Three 1 +

(Use Author style)1 Affiliation (Use Affiliation Style)

2 Affiliation (Affiliation 2 style has extra spacing after the line)

Abstract. The 2010 International Conference on Chemical Engineering and Applications (CCEA 2010) isa worldwide, multidisciplinary academic conference concerned with research, education and application intoall aspects of Chemical Engineering and Applications, etc. (Use abstract Style)

Keywords: one, two, three, etc. (Use keywords style)

1. Introduction (Use Header 1 Style)Welcome to The 2010 International Conference on Chemical Engineering and Applications (CCEA

2010). The Conference is a primary international forum for scientists and technicians working on topicsrelating to Chemical Engineering and Applications. It will provide an excellent environment for participantsto meet fellow academic professionals, to enhance communication, exchange and cooperation of most recentresearch, education and application on relevant fields. It will bring you new like-minded researchers, freshidea. It also provides a friendly platform for academic and application professionals from crossing fields to

communication together.2. Guide for Author (Use Header 1 Style)

2.1. Submitting (Use Header 2 style)Contributions to the congress are welcome from throughout the world. Manuscripts may be submitted to

(please specify) .

2.2. Manuscript requirements (Use Header 2 style)All papers must be in Microsoft Word format and MAY NOT EXCEED 5 PAGES IN LENGTH,

including figures, tables and references. The file of each paper cannot be larger than 4,000Kb. Filenamesshould be as follows: (please specify) , etc.

Use the Body text style for all paragraphs. The following is an example of the Bullet style, whichyou may want to use for lists.

Publisher: World Academic Press The ISBN assigned: 978-1-84626-xxx-x, etc. Conference host: China Association of Sports Mathematics and Engineering, etc.

Following is an example of a graphic and caption (Figure style).

Fig. 1: Use Figure style here.

Corresponding author. Tel.: + (please specify) ; fax: + (please specify) . E-mail address : (please specify) .

ISBN 978-1-84626-xxx-xProceedings of 2 nd International Conference on Construction and Project Management

(ICCPM 2011)Singapore , 16-18 September , 2011 , pp. xxx-xxx

8/6/2019 ICCPM 2011 Template

2/2

Papers should be typed on A4 size paper, formatted with single columns and should be single-spaced, 11 point Times New Roman font. Also, do not change the margins as they have been set in the template: Top-2cm, Right-2 cm, Bottom-2 cm, Left-2 cm. Do not add page numbers to your paper. We will insert these later.

Use the Header 2 style, shown above, for subheads.

2.3. Important Information (Use Header 2 style)Manuscript is accepted for review with the understanding that no substantial portion of the paper has

been published or is under consideration for publication elsewhere and that its submission for publication has been approved by all of the authors and by the institution where the work was carried out. It is further understood that any person cited as a source of personal communications has approved such citation. Articlesand any other material published in the proceeding represent the opinions of the authors and should not beconstrued to reflect the opinions of the Editor(s) or the Publisher.

Authors submitting a manuscript do so on the understanding that if the manuscript is accepted for publication, copyright for the article, including the right to reproduce the article in all forms and media, shall be assigned exclusively to the Publisher.

3. Acknowledgements (Use Header1 style)Please acknowledge collaborators or anyone who has helped with the paper at the end of the text.

4. References (This is Header 1 style)[1] J. Li, Y. Jiang, R. Fan. Recognition of Biological Signal Mixed Based on Wavelet Analysis. In: Y. Jiang, et al

(eds.). Proc. of UK-China Sports Engineering Workshop . Liverpool: World Academic Union. 2007, pp. 1-8. (UseReferences Style)

[2] R. Dewri, and N. Chakraborti. Simulating recrystallization through cellular automata and genetic algorithms.Modelling Simul. Mater. Sci. Eng . 2005, 13 (3): 173-183.

[3] A. Gray. Modern Differential Geometry . CRE Press, 1998.