idec microsmart with modbus tcp client4) in the host i/f driver, select modicon as the manufacturer,...
TRANSCRIPT
![Page 1: IDEC Microsmart with Modbus TCP CLIENT4) In the Host I/F Driver, select Modicon as the manufacturer, Modbus TCP Client as the protocol and 1:N Communication as the connection type](https://reader030.vdocument.in/reader030/viewer/2022040402/5e82e75508f9e728c50fa8d4/html5/thumbnails/1.jpg)
Communication Settings:
IDEC Touchscreens
(HG2G, HG3F, and HG4F)
And
IDEC PLC & WebServer
Via Modbus/TCP Client
![Page 2: IDEC Microsmart with Modbus TCP CLIENT4) In the Host I/F Driver, select Modicon as the manufacturer, Modbus TCP Client as the protocol and 1:N Communication as the connection type](https://reader030.vdocument.in/reader030/viewer/2022040402/5e82e75508f9e728c50fa8d4/html5/thumbnails/2.jpg)
Introduction:
The following information will help you configure the IDEC touchscreens
and the IDEC PLCs and WebServer modules using Modbus TCP Client
driver.
Required Cables:
Ethernet cables (one for HMI, one for WebServer unit)
FC4A-KC3C
HG9Z-XCM1A (maintenance cable)
Required Software:
WindOI NV2
WindLDR
Devices used for testing:
1 HG2G units
1 PLC
1 WebServer unit
Below are the IP addresses used for testing, and these are just example
addresses: (The IP address may differ depending on the environment)
192.168.104.222 (assigned in the master HMI)
192.168.104.229 (assigned in the WebServer Station 0)
![Page 3: IDEC Microsmart with Modbus TCP CLIENT4) In the Host I/F Driver, select Modicon as the manufacturer, Modbus TCP Client as the protocol and 1:N Communication as the connection type](https://reader030.vdocument.in/reader030/viewer/2022040402/5e82e75508f9e728c50fa8d4/html5/thumbnails/3.jpg)
System Configuration
Ethernet Cables
![Page 4: IDEC Microsmart with Modbus TCP CLIENT4) In the Host I/F Driver, select Modicon as the manufacturer, Modbus TCP Client as the protocol and 1:N Communication as the connection type](https://reader030.vdocument.in/reader030/viewer/2022040402/5e82e75508f9e728c50fa8d4/html5/thumbnails/4.jpg)
Step 1: WindOI NV2 Software
Configure the HG2G Master by creating a program in WindOI NV2
software.
1) Launch WindOI NV2 software. Select File � New Project.
2) Create a Project Name.
3) Click the “Next” button to choose the OI and Model Type.
4) In the Host I/F Driver, select Modicon as the manufacturer, Modbus TCP Client
as the protocol and 1:N Communication as the connection type.
5) Click the “OK” button to continue.
![Page 5: IDEC Microsmart with Modbus TCP CLIENT4) In the Host I/F Driver, select Modicon as the manufacturer, Modbus TCP Client as the protocol and 1:N Communication as the connection type](https://reader030.vdocument.in/reader030/viewer/2022040402/5e82e75508f9e728c50fa8d4/html5/thumbnails/5.jpg)
6) In Project Settings, select the Communication Interface tab. Under Interface
configuration, select Ethernet Host Communication and enter the IP address and
Subnet Mask (the IP address may differ depending on the environment).
![Page 6: IDEC Microsmart with Modbus TCP CLIENT4) In the Host I/F Driver, select Modicon as the manufacturer, Modbus TCP Client as the protocol and 1:N Communication as the connection type](https://reader030.vdocument.in/reader030/viewer/2022040402/5e82e75508f9e728c50fa8d4/html5/thumbnails/6.jpg)
7) Select the Host I/F Network tab and enter the Web Server IP address. The port
number leave as is.
Double click to edit information
![Page 7: IDEC Microsmart with Modbus TCP CLIENT4) In the Host I/F Driver, select Modicon as the manufacturer, Modbus TCP Client as the protocol and 1:N Communication as the connection type](https://reader030.vdocument.in/reader030/viewer/2022040402/5e82e75508f9e728c50fa8d4/html5/thumbnails/7.jpg)
Select the OK button to continue.
8) To test the communication between two devices over the Ethernet network, select
“Numerical Input” on the Base Screen.
1) Select Numerical Input & drop on the base
screen
2) Double click Numerical Input to configure the
properties
3) In Destination Device, select Holding Register
400001.
![Page 8: IDEC Microsmart with Modbus TCP CLIENT4) In the Host I/F Driver, select Modicon as the manufacturer, Modbus TCP Client as the protocol and 1:N Communication as the connection type](https://reader030.vdocument.in/reader030/viewer/2022040402/5e82e75508f9e728c50fa8d4/html5/thumbnails/8.jpg)
8) Finally, download the project to the HG2G either via Ethernet communication or
Serial communication. Select “Online” then download.
![Page 9: IDEC Microsmart with Modbus TCP CLIENT4) In the Host I/F Driver, select Modicon as the manufacturer, Modbus TCP Client as the protocol and 1:N Communication as the connection type](https://reader030.vdocument.in/reader030/viewer/2022040402/5e82e75508f9e728c50fa8d4/html5/thumbnails/9.jpg)
Step 2: WindLDR Software
Configure Pentra MicroSmart PLC 1) Launch WindLDR software
2) Select Configure/PLC Selection and select the PLC model FC5A-
C24R2.
HG9Z-XCM1A
192.168.104.229
![Page 10: IDEC Microsmart with Modbus TCP CLIENT4) In the Host I/F Driver, select Modicon as the manufacturer, Modbus TCP Client as the protocol and 1:N Communication as the connection type](https://reader030.vdocument.in/reader030/viewer/2022040402/5e82e75508f9e728c50fa8d4/html5/thumbnails/10.jpg)
3) Select Configure/Function Area Settings, and click on a
Communication tab.
![Page 11: IDEC Microsmart with Modbus TCP CLIENT4) In the Host I/F Driver, select Modicon as the manufacturer, Modbus TCP Client as the protocol and 1:N Communication as the connection type](https://reader030.vdocument.in/reader030/viewer/2022040402/5e82e75508f9e728c50fa8d4/html5/thumbnails/11.jpg)
4) Download the communication settings to the PLC by selecting
Online/Download.
Click this arrow to select the
Modbus/TCP Slave (Server)
![Page 12: IDEC Microsmart with Modbus TCP CLIENT4) In the Host I/F Driver, select Modicon as the manufacturer, Modbus TCP Client as the protocol and 1:N Communication as the connection type](https://reader030.vdocument.in/reader030/viewer/2022040402/5e82e75508f9e728c50fa8d4/html5/thumbnails/12.jpg)
Step 3: WebServer Module Configure the WebServer module by following the steps below.
![Page 13: IDEC Microsmart with Modbus TCP CLIENT4) In the Host I/F Driver, select Modicon as the manufacturer, Modbus TCP Client as the protocol and 1:N Communication as the connection type](https://reader030.vdocument.in/reader030/viewer/2022040402/5e82e75508f9e728c50fa8d4/html5/thumbnails/13.jpg)
Please make sure the Web Server Module is already configured and able to
communicate over your Ethernet network. The IP address 192.168.104.229
is assigned in the WebServer. If you haven’t done this, please download and
follow the instructions in the Quick Start Guide before proceeding to the
next step.
Please click on the link below to download Quick Start Guide.
http://www.idec.com/language/english/other/WebServerQuickStart.pdf
1) Set the function selector switch on the WebServer module to USER.
2) In the URL window, enter the WebServer unit IP address:
http://192.168.104.229/index.htm and hit Enter.
A Warning-Security dialog box will appear. Click Run to continue.
3) The Web Server Unit Settings dialog box will appear.
![Page 14: IDEC Microsmart with Modbus TCP CLIENT4) In the Host I/F Driver, select Modicon as the manufacturer, Modbus TCP Client as the protocol and 1:N Communication as the connection type](https://reader030.vdocument.in/reader030/viewer/2022040402/5e82e75508f9e728c50fa8d4/html5/thumbnails/14.jpg)
4) Click the “Serial Port” menu to check the serial communication
between the PLC and WebServer module.
![Page 15: IDEC Microsmart with Modbus TCP CLIENT4) In the Host I/F Driver, select Modicon as the manufacturer, Modbus TCP Client as the protocol and 1:N Communication as the connection type](https://reader030.vdocument.in/reader030/viewer/2022040402/5e82e75508f9e728c50fa8d4/html5/thumbnails/15.jpg)
Select the same parameters values set in the PLC Communication
Settings (9600, 8, even, 1, none).
Click on the Save button to save the settings.
5) Select the Network Services tab, change the TCP Server port to 502
and click on the Save button.
![Page 16: IDEC Microsmart with Modbus TCP CLIENT4) In the Host I/F Driver, select Modicon as the manufacturer, Modbus TCP Client as the protocol and 1:N Communication as the connection type](https://reader030.vdocument.in/reader030/viewer/2022040402/5e82e75508f9e728c50fa8d4/html5/thumbnails/16.jpg)
6) Last, select the Advanced tab. Follow the settings that are shown on
this image. Click on the Save button to save.
![Page 17: IDEC Microsmart with Modbus TCP CLIENT4) In the Host I/F Driver, select Modicon as the manufacturer, Modbus TCP Client as the protocol and 1:N Communication as the connection type](https://reader030.vdocument.in/reader030/viewer/2022040402/5e82e75508f9e728c50fa8d4/html5/thumbnails/17.jpg)
If the communication settings are correct, you should be able to enter the
data in Numerical Input.