identification system brochure
DESCRIPTION
TRANSCRIPT
Identification systemsfor industrial
production control.
ww
w.if
m.c
om
/gb
/id
enti
fica
tio
nId
enti
fica
tio
n s
yste
ms
LF system125 KHz
RFID systemDTS125
Opticalcode reader
Multicode readertype O2I
LF/HF system125 KHz13.56 MHz
UHF system868 MHz (EU)913 MHz (USA)
RFID systemDTE100
RFID systemDTE800
2
Identification systems from ifm electronic.The optimum solution for every requirement.
For industrialapplications
–up to 100 mm AS-i 16 bitIdentificationin routingconveyors.
– –up to 2 m
RS232EthernetTCP/IP
Ethernet/IP
1D bar codes,2D matrix
codes
Identification of1D and 2D codes forthe monitoring ofprocess operations.
up to 10 m EthernetTCP/IP
240 bit EPC512 bit user
–up to 60 mm Profibus DP 32 KB
Identificationin conveyors.Large data volumes,high speed.
Identification inproduction and logistics.Long ranges,many tags.
3
RFI
D p
rod
uct
ion
and
log
isti
csR
FID
con
veyo
rsR
FID
ro
uti
ng
con
veyo
rsO
pti
cal
cod
e re
ader
Range
Field
bus
Stora
ge cap
acity
tag
Hard ta
g, adap
ted to
the a
pplicat
ion co
ndition
Smar
t tag
,
low
-cost
adhes
ive ta
pe
4
High reading reliability:Automatic setting of theexposure time, adaptation bysegmented lighting for criticalsurfaces.
Intelligence in the sensor:Verifier system reduces datatransmission.
Flexible connection:RS-232 and Ethernet TCP/IPinterface.
Quick in the process:Object speeds of up to 7 m/s.
Compact integration:Illumination, optics, evaluationand interfaces in an industriallycompatible housing.
Easy handling:The system is configured andready for use within a fewminutes – with PC software ordirectly on the sensor.
Multicode reader type O2IThe compact all-rounder.
The compact unit is installed using thesuitable mounting set and connectedto the controller (PLC) via the processinterface.Parameter setting is done via anEthernet cable using a common PC.
Powerfulidentification.
In addition to thData Matrix codeECC200, the ifmmulticode readerhandles further2D and 1D codes.Reading is notdependent on theorientation of thcode to the sen-sor. Even dama-ged or soiledcodes are reliablidentified, even if28 % of theinformation hasbeen damaged.
Further functionsinclude the out-put of the codeposition via theprocess interfaceadjustable total
5
quality parame-ters, individualillumination set-tings for eachconfiguration in agroup, integratedfault memory andaccess protectionwith password.
The professionalsoftware of themulticode readertakes the highreading reliabilityof the Data Matrixcode to a newdimension.
Top choice forprice/perfor-mance:the multicodereader provideshigh functionalityand performanceat the price of asensor.
Optimumillumination.
In addition to anautomatic expo-sure setting,manual adjust-mentis also possible.Four lightingsegments can bedeactivated andactivated manu-ally. So optimumresults areachiev-ed evenwith highly re-flective metalsurfaces.
The ifm multicode reader detectsnumerous 2D and 1D codes.The standardised 2D code can beapplied in different ways: printed onpaper, engraved by laser or dot-peened onto a metal surface.
Production control for solar modulesof the company Conergy AG:the decision in favour of the multi-code reader was taken due to its highreading rate. The compact dimensionsand the integrated lighting ensureinstallation requiring only little space.
O2I in theapplication.
There is a widerange of applica-tions for the mul-ticode reader inindustry — fromproduct trackingand productioncontrol to productidentification.They are used forthe automotive
and food indus-tries, conveying,the production ofsolar installationsas well as ma-chine tools andprint machines.
Further information atwww.ifm.com/gb/multicodereader
Orientation-independent identificationof 1D and 2D codes.
QR code
PDF code
DMC code
Bar code
RFI
D p
rod
uct
ion
and
log
isti
csR
FID
con
veyo
rsR
FID
ro
uti
ng
con
veyo
rsO
pti
cal
cod
e re
ader
6
Plug and play:Cost reduction with quick andeasy set-up.
Efficient:Connection of up to 31 RFIDreaders to one AS-i master.
Safe:High reading reliability forcompact design.
Ready for operationat once:No programming for read / writesystems with AS-Interface.The stored value is automaticallyprovided by the transponderwhen the antenna is passed.
Certified:The AS-Interface certificationguarantees interoperability inautomation technology.
RFID system DTS125Keep track of the workpiece.
Plug and Play also for the hardware:connection via M12 connector or AS-isplitter box. The DTS125 system canbe integrated into AS-i networks inno time and is ready for operationimmediately. In addition to the lowercost for hardware, this also saves timeduring set-up.
The DTS125 RFID system ensuressmooth logistics flow on a productionline for transmissions. All workpiececarriers can be identified by meansof RFID. Optical processes such as barcodes were eliminated due to thesevere operating conditions (oils,metal swarf).
The DTS125 RFidentificationsystem from ifmis an industriallcompatible iden-tification systemin 125 KHz tech-nology. It is thefirst RFID systemfor AS-Interfaceworldwide.
7
RFI
D p
rod
uct
ion
and
log
isti
csR
FID
con
veyo
rsR
FID
ro
uti
ng
con
veyo
rsO
pti
cal
cod
e re
ader
The DTA300 RFID reader with increasedread / write distances up to 100 mmsolves tasks in assembly and convey-ing technology and in handling auto-mation.
The compact read/write heads in-clude, in additionto the antenna,the completeevaluation andthe interface toAS-i. So the unitscan be operateddirectly on theAS-Interface andenable datatransmission tothe controller.
ID tags forassem-bly andconveyorsystems. The ro-busttransponders,which do notrequire any bat-ter-ies, are parti-cularly suited for
filling systems.The system isalso the optimumchoice for mar-king workpiececarriers.
DTS125 in theapplication.
The DTS125 RFIDsystem has beendesigned forproduction con-trol in assemblyand conveyingtechnol-ogy, handling,
Further information atwww.ifm.com/gb/dts125
PLC
Profinetgateway
LF RFID system withintegrated AS-Interface.
8
Clear:Status display via LED andintegrated web server.
Flexible:Connection of RFID antennas ordigital inputs / outputs. Antennaand transponder combinations ofsome bits to several Kbytes.
Easy:Connection of the antennas withunshielded standard cables of0.3 m to 20 m.
Integrable:Function blocks enable easyintegration into the higher levelautomation or process control.
Certified:The Profibus DP certificationguarantees interoperability inautomation technology.
Robust:Protection rating IP 67 for harshindustrial environments.
RFID system DTE100The ”electronic route card“.
The LF or HF read / write antennas inan industrially compatible housing aresimply connected to the evaluationunit via a standard M12 connector.
RFID system withevaluation unit,antennas andtransponders.
ifm electronic hadeveloped a newRFID system forproduction andconveying in par-ticular.
The robust eval-uation unit has aProfibus DP inter-face. The inte-grated web serverenables easyparameter settingvia the webbrowser.
Scan code and watch the video
on the DTE100 system!
9
The requirementsof harsh indu-strial environ-ments are met bya stable metalhousing, a widetemperaturerange and thehigh protectionrating IP 67.
The new RFIDevaluation unitDTE100 has fourantenna connec-tions, which canalternatively beused as digitalI/Os. The anten-nas are connectedvia standardisedM 12 connectors.
The standard pinassignment of theI/O connectionsensures that
common sensorsor actuators aredirectly connec-ted and poweredfrom the RFIDevalu-ation unit.
LF and HFtransponder.
In addition to LFtransponders withup to 2-Kbitmemory, theprod-uct portfo-lio of ifm electro-nic also covers HFtran-sponderswith16 Kbits as FRAMversion which canbe rewritten anunlimited numberof times.
All connections are for standard M12connectors. Current is also directlysupplied via an M12 connection.The wide range of accessories suchas Profibus connection cables andterminating resistors facilitate thesystem set-up.
DTE100 in theapplication.
The RFID systemplatform is widelyused in produc-tion for identify-ing tools ormonitor-ing productionsteps.
Data can be savedand read in thetransponder as onan electronicroute card.
Further applica-tions can befound in qualityassur-ance, in theautomotive indu-stry as well as inautomation andconveying.
Easy use andflexible parame-ter setting allowthe user to solveeach identifica-tion task preciselyandwithout any prob-lems.
Further information atwww.ifm.com/gb/dte100
LF and HF tran-sponder with upto 16 Kbits asrewritable FRAMversion.
PLC
RFID evaluationunit
Web browser
RFI
D p
rod
uct
ion
and
log
isti
csR
FID
con
veyo
rsR
FID
ro
uti
ng
con
veyo
rsO
pti
cal
cod
e re
ader
LF/HF RFID with integratedProfibus DP interface.
10
Clear:Status display via LED andintegrated web server.
Flexible:Ultra low, low, mid and widerange antennas for everyapplication.
Easy:UHF evaluation unit with fourexternal antenna terminals.
Certified:Ethernet TCP/IP interface forparameter setting and datatransmission.
Robust:The protection rating IP 65meets all requirements for harshindustrial environments.
RFID system DTE800Long ranges for
production and logistics.
UHF evaluationunits.
As componentsof the UHF systemplatform, theevaluation unitsDTE800 forEurope andDTE900 for theUSA arecompliant with865-870 MHzand 902-928MHzrespectively.
The stationaryunits in the UHFrange allow longread / write ran-ges with passivetags.
Up to 10 m:Wide range antenna for the simul-taneous detection of large quantities,e.g. boxes on pallets when gates arepassed.
Connection of4 antennas.
Only for ifm:UHF evaluation
unit with differenttypes of antenna,
also for mixedoperation. With
Ethernet interfaceand digital inputs
and outputs.
RFI
D p
rod
uct
ion
and
log
isti
csR
FID
con
veyo
rsR
FID
ro
uti
ng
con
veyo
rsO
pti
cal
cod
e re
ader
11
Up to 2 m:Mid range antenna for the reliableidentification of larger units, e.g.on a conveyor belt.
Ultra low and lowrange antennas.
These antennasare distinguishedby the near field.In order toachieve a highselectivity, thesmallestpossible designsare used as theymanage shortreading ranges.
Mid rangeantennas.
Due to its smallerdimensions themid range an-tennais chosen forapplications inthe near / far fieldwith
Wide rangeantennas.
With an angle ofaperture of 30¡these antennashave been devel-oped for appli-cations in the farfield where read-ing ranges ofup to 10 m arerequired.
Up to 20 cm:(Ultra) low range antenna for theselective detection of individualproducts in the close range.
DTE800 in theapplication.
The UHF systemplatform from ifmelectronic is usedin production,intralogistics andconveying due tothe application-specific antennas.
Goods such aspackaging orpallets can bedetected withoutcontact.
The UHF RFID isoptimised forapplications inproduction andmaterial flowcontrol, the assetand supply chainmanagement aswell as track &trace.
Further information atwww.ifm.com/gb/dte800
PLC
RFID evaluationunit
UHF RFID system forworldwide use.
Efficient control of processes with RFID.
The DTE100 RFID system can beoperated with different antennas with125 KHz (LF) or 13.56 MHz (HF).
Inductive RFIDtechnology
The RFID system(Radio FrequencyIDentification)from ifm elec-tron-ic generatesan electromagne-tic field for rea-ding and writingof data.The electro-magnetic fieldemitted by theantenna inducesvoltage in thepassive ID tag(transformerprinciple).
This activates theID tag (transpon-der) which re-turns its code.Process-ing ofthe code andtransmission e.g.to the AS-Inter-face are carriedout in the read /write head.Advantage: reli-able data trans-mission indynamic readingprocesses Depen-ding onapplication,range, data volu-mes, and read /write dis-tancesdifferent
RFID frequenciesare used, e.g.125 KHz (LF),13.56 MHz (HF),868 MHz (UHF,Europe) and 913MHz (UHF, USA).
Example:
RF identificationsystem DTS125with integratedantenna.
read / write system
antenna
ID tag
System at a glance:
Operating distance [mm]
Field of view size [mm]
50
20 x 14 36 x 26 68 x 50
100 200
Order no. red light O2I100 O2I102
LF RFID system and transponders (selection)Description Order no.
RFID read / write system, AS-Interface, range max. 10 mm DTA100
RFID read system, AS-Interface, range max. 20 mm DTA101
RFID read / write system, AS-Interface, range max. 65 mm DTA200
RFID read system, AS-Interface, range max. 65 mm DTA201
O2I104
Order no. infrared O2I101 O2I103 O2I105
50
46 x 32 77 x 56 140 x 100
100 200 200
40 x 30
RFID read / write system, AS-Interface, range max. 100 mm DTA300
RFID read system, AS-Interface, range max. 110 mm DTA301
Description Order no.
ID tag, M18 x 1 mm, screw mounting E80311
ID tag, diameter 12 x 2 mm E80312
ID tag, diameter 20 x 2.15 mm E80317
ID tag, diameter 30 x 2.15 mm E80318
ID tag, diameter 50 x 2.2 mm E80319
ID tag, ISO card E80320
UHF RFID evaluation units, antennas and transpondersDescription
Multicode reader
Order no.
RFID UHF evaluation unit, Ethernet, 2 DI / 2 DO, EU/ETSI DTE800
RFID UHF evaluation unit, Ethernet, 2 DI / 2 DO, US/FCC DTE900
RFID UHF ultra low range antenna, EU/ETSI/US/FCC ANT805
RFID UHF low range antenna, EU/ETSI ANT810
RFID UHF low range antenna, US/FCC ANT910
Description Order no.
RFID UHF wide range antenna, 70°/70° EU/ETSI ANT830
RFID UHF mid range antenna, 100°/100° EU/ETSI ANT820
RFID UHF wide range antenna, 70°/70° US/FCC ANT930
RFID UHF ID tag/D50X3.3/04 E80350
RFID UHF on metal ID tag/D55X13/04 E80351
LF/HF RFID evaluation units, antennas and transpondersDescription Order no.
RFID evaluation unit, Profibus DP EU/ETSI DTE100
RFID antenna 125 KHz ANT512
RFID antenna 13.56 MHz ANT513
Description Order no.
ID tag/30X2.5/05 – 125 KHz 256 bit E80360
ID tag/30X2.5/05 – 125 KHz 2048 bit E80361
ID tag/30X2.8/03 – 13.56 MHz 16 Kbit – FRAM E80370
ID tag/30X2.5/06 – 13.56 MHz 896 bit E80371
200 x 150 400 x 300
1000 2000
ifm electronic gmbhFriedrichstraße 145128 EssenTel. +49 / 201 / 24 22-0Fax +49 / 201 / 24 22-1200E-mail [email protected]
Position sensors
Sensors formotion control
Industrial imaging
Safety technology
Process sensors
Condition monitoringsystems
Industrialcommunication
Identification systems
Systems formobile machines
Connectiontechnology
Overviewifm product range:
Accessories
Visit our website:
www.ifm.com
Over 70 locations worldwide –at a glance at www.ifm.com
ifm a
rtic
le n
o. 7
5114
71 ·
We
rese
rve
the
right
to
mak
e te
chni
cal a
ltera
tions
with
out
prio
r no
tice.
· Pr
inte
d in
Ger
man
y on
non
-chl
orin
e bl
each
ed p
aper
. 04
/12