if you’re looking to get different results, - beyma · 2010. 12. 7. · if you’re looking to...
TRANSCRIPT
If you’re looking to get different results, don’t always do the same thing over and over again.
Albert Einstein 1879-1955
In our minds we already knew....It was going to be extremely difficult. Creating a product like the Xcellence series was a great challenge. Achieving a standard of quality so exceptional meant a lot of work for us, dedicating over three years to exhaustive research and continued innovation, analysing hundreds of components, scrutinising even the finest detail. Now, finally we have got there. This is an all-time Hit. There will be a Before and an After Xcellence series.
The virtue of being ...Xcellence
X12CX15C
48-bit in-built DSP with 28-bit filter coefficients wich preserves high quality audio signal. Five parametric equalizers, LPF-HPF-Low/High shelf crossovers, delay, gain and limiters for each way.5 factory presets + 16 free configurable memories.750 W Class D amplification for the low-mid woofer.250 W Class D amplification for the mid-high driver.MAINS OVERVOLTAGE PROTECTION up to 400V.Coaxial neodymium loudspeaker 12” woofer (X12C), 15” woofer (X15C).3” titanium diaphragm compression driver.Pole mount sockets mounted on the top and bottom sides.
The X12C and X15C combines the advantages of coaxial point source technology with the convenience of self-powered performance and the power of on-board digital signal processing. Its low weight makes it the best option with a power/weight/performance ratio in its class.
X15LTX15LT/P
Self Powered 1500W!Bi-amplified system.Class D technology.1000W amplification for the low-mid woofer.500W amplification for the mid-high driver.131dB SPL.
Fully Configurable DSPGain, delay, limiters, phase.Five parametric EQ.Five optimized factory presets.Up to 16 user presets.24 bit AD/DA converter with 112dB dynamic range.
The X15LT incorporates the highest technology features that take this system to a new level of sound performance. It provides an amazing sound pressure level, outstanding clarity of reproduction, perfect coherence and constant coverage. Its moderate weight and size make it perfect for touring and fixed installations.
The X15LT/P has the same transducers and a passive crossover network with sense return to work with our DPU3K6 amplifier built in DPM processing card.
Premium Customized TransducersNeodymium magnet transducers.15” long excursion woofer.4” voice coil, long term power handling.3” pure titanium diaphragm.High performance with smooth treble.
High Performance in a Compact DesignOptimized reinforced enclosure.13 layers Baltic birch plywood.High resistance waterproof bi-component paint.60º x 50º CD horn for optimum coverage & clustering.MAINS OVERVOLTAGE PROTECTION up to 400V.
X18W
48-bit in-built DSP with 28-bit filter coefficients wich preserves high quality audio signal.Five parametric equalizers, LPF-HPF-Low/High shelf crossovers, delay, gain and limiter.Optimized factoy presets + 16 free configurable memories.1500 W Class D amplification.MAINS OVERVOLTAGE PROTECTION up to 400V.Pole mount sockets mounted on the top for 35mm. Ø distance rod.18” Neodymium long excursion woofer (4” voice coil) with demodulating rings which reduce the third order distortion and improve the transient response.
With a compact size, the X18W perfectly combines with X12C/X15C/X15LT for bass reinforcement of the Xcellence series. The use of neodymium woofers and a new generation of digital electronics at the highest level, provide excellent performance and sound quality.
ComponentsLFHF
Frequency Response
SPL Maximum @ 1m.
Amplifier Class D
Average Consumption 1/3
Built-in DSP
Dimensions HxWxD
Weight
Rigging points
12” Neodymium Woofer3” Titan. Diaph. Nd. Driver
50 Hz - 20 kHz
127 dB
Low: 750 WHigh: 250 W
3 A
Yes
560 x 410 x 401 mm.
19.2 Kg.
Pole Mount Sockets. M10
15” Neodymium Woofer3” Titan. Diaph. Nd. Driver
45 Hz - 20 kHz
127 dB
Low: 750 WHigh: 250 W
3 A
Yes
650 x 460 x 401 mm.
23.2 Kg.
Pole Mount Socket. M10
15” Neodymium Woofer3” Titan. Diaph. Nd. Driver
42 Hz - 19 kHz
131 dB
Low: 1000 WHigh: 500 W
2 A
Yes
750 x 470 x 500 mm.
38 Kg.
Pole Mount Socket/12 x M10
15” Neodymium Woofer3” Titan. Diaph. Nd. Driver
42 Hz - 19 kHz
131 dB
Passive
-
-
750 x 470 x 500 mm.
34 Kg.
Pole Mount Socket/12 x M10
18” Neodymium WooferFront Loaded Bass Reflex
30 Hz - 140 Hz
128 dB
1500 W
3 A
Yes
567 x 610 x 650 mm.
43 Kg.
M20. Pole Mount Socket
X18WX15LT/PX15LTX15CX12C
FULL RANGE SYSTEMS
X210A X210PIn 2004 Master Audio introduced its first Line Array System, the MA210D, setting a reference in the market thanks to its design and ease of usability. The new X210 System combines this successful philosophy with our R&D’s latest technical developments, offering a scalable, flexible and smart solution for all kind of high performance applications.Benefits
Advanced amplifier diagnostics: temperature, output voltage, clip limiter and current sense allow checking the status of the whole system at one glance to your computer’s screen.
Remote connection: DSP parameters modifications and amplifier diagnostics can be remotely monitored from a PC connected to an Ethernet interface (wired or wireless*).
Smart energy treatment: Mains Overvoltage protection and Standby mode, which reduces the power consumption of the system while it is not being used.
Thanks to its compact design it is ideal for all kind of venues: discos, concert halls, houses of worship, stadiums and open air live events.
Accurate acoustic design guarantees uniform coverage and long distance high frequency reproduction.
Smart rigging system for quick and easy setup.
Built-in Digital Signal Processing adjustable through a friendly software interface: tune the system to the needs of every event by changing fast and easily the main audio parameters.
Mapping tools (EASE Focus) available for acoustical response simulation and mechanical setup: plan your installation before you get there.
Self powered tandem solutionX210A built-in amplification and Digital Signal Processing can feed a slave X210P.Total power of the set X210A+X210P: 3000W.Third generation class D technology.One unit delivers 134 dB SPL Musical Program.
Full control in your hands24-bit AD/DA converters with 112dB dynamic range, 96kHz sampling rate.User selectable parametric EQ, gain, limiter threshold, delay and phase.Several optimized factory presets, up to 16 user presets.Self amplifier diagnostics: Output power, Temperature, Clipping.
Accurate acoustic design120º horizontal coverage. 2x10” Neodymium Woofers, IC Copper Rings.3x1” Neodymium Drivers, 1.7” Mylar Diaphrg.High frequency planar waveguide design.
..and much more!!!Optimized reinforced enclosure.13 layers Baltic birch plywood.High resistance waterproof bi-component paint.MAINS OVERVOLTAGE PROTECTION up to 400V.Standby mode: The amplifier can be remotely set to a low power consumption mode and waked up again in a few seconds.Ethernet connectivity*. Configurable through Master Audio’s software DSPStudio.
*X210A cabinets have Ethernet wired connection. Wi-Fi Ethernet can be configured using external routers/access points
Main Features
X218WThe combination of two 18” long excursion woofers with extremely reinforced cabinet and third generation 2400W class D amplifier with DSP, Presets, Cardioide configuration, Ether-net connectivity, ...., makes the X218W one of the most advanced and powerful subwoofers on the market.
2 x 18” LONG EXCURSION WOOFER, ACTIVE, 2400W!
Full control in your hands24-bit AD/DA converters with 112dB dynamic range, 96kHz sampling rate.User selectable parametric EQ, gain, limiter threshold, delay and phase.Optimized factory presets, up to 16 user presets.Easy Cardioide configuration through dedicated preset.Self amplifier diagnostics: Output power, Temperature, Clipping.
...and much more!!!Optimized reinforced enclosure, 13 layers Baltic birch plywood.High resistance water proof bi-component paint.MAINS OVERVOLTAGE PROTECTION up to 400V.Standby mode: The amplifier can be remotely set to a low power consumption mode and waked up again in a few seconds.Ethernet connectivity*. Configurable through Master Audio’s software DSPStudio.
*X218W cabinets have Ethernet wired connection. Wi-Fi Ethernet can be configured using external routers/access points
X215W
The X215W with its moderate format and surprising low-frequency response, combines perfectly with the X210A/P Line Array system. It’s the ideal answer when subwoofers need to be flown.
2 x 15” LONG EXCURSION WOOFER, ACTIVE, 2400 W!
Full control in your hands24-bit AD/DA converters with 112dB dynamic range, 96kHz sampling rate.User selectable parametric EQ, gain, limiter threshold, delay and phase.Optimized factory presets, up to 16 user presets.Easy Cardioide configuration through dedicated preset.Self amplifier diagnostics: Output power, Temperature, Clipping.
...and much more!!!Optimized reinforced enclosure, 13 layers Baltic birch plywood.High resistance waterproof bi-component paint.MAINS OVERVOLTAGE PROTECTION up to 400V.Standby mode: The amplifier can be remotely set to a low power consumption mode and waked up again in a few seconds.Ethernet connectivity*. Configurable through Master Audio’s software DSPStudio.
*X215W cabinets have Ethernet wired connection. Wi-Fi Ethernet can be configured using external routers/access points
ComponentsLFHF
Frequency Response
SPL Maximum @ 1m.
Amplifier Class D
Average Consumption 1/3
Built-in DSP, Ethernet
Dimensions HxWxD
Weight
Rigging
2 x 10” Neodymium Woofer3 x 1” Neodymium Driver
70 Hz - 18 kHz
134 dB
Low: 2400 WHigh: 600 W
4 A
Yes
314 x 764 x 574 mm.
37 Kg.
Stainless Steel
2 x 10” Neodymium Woofer3 x 1” Neodymium Driver
70 Hz - 18 kHz
134 dB
Passive
-
-
314 x 764 x 574 mm.
33 Kg.
Stainless Steel
2 x 15” Neodymium Woofer6º Order Bandpass Subwoofer
32 Hz - 120 Hz
135 dB
2400 W
4 A
Yes
600 x 764 x 859 mm.
79 Kg.
Stainless Steel
2 x 18” Neodymium WooferBass Reflex. Laminar vents
30 Hz - 100 Hz
137 dB
2400 W
4 A
Yes
1046 x 764 x 780 mm.
98 Kg.
M10. Pole Mount Stacking
X210A X210P X215W X218W
LINE ARRAY SYSTEMS
X12C/15C/15LT/18W AccessoriesSP/CRD: 35mm. / L: 80cm.Distance rod with M20 Thread.
SP/SXD: 35mm. / L: 1,8m.Adjustable aluminium tripod stand.
UB-X12“U” Bracket adjustable 360º for X-12C.
ACR-M10Forged eyebolt rigging for overhead installations for X12C, X15C y X15LT.
USB PORTAdaptor with connections 2 x RJ-2 + “Y” adaptor (X12C,X15C, X15LT).
TA-X210Touring Bumper for X210/X215. Stainless Steel.
ST-X215Kit Stacking for X210 over X215.
ST-X218Kit Stacking for X210 on TA-X210over X218.
FC-X210Flight Case for 4 units + Bumper
FC-X215Flight Case for 2 units.
NC-X218Nylon Cover X218
BL-8Pin “Ball Lock” Heavy Duty. 3000 Kg.Stainless Steel.
CWKComunication Wireless Kit on transport briefcase. To control up to 8 active systems X210, X215 and X218.Includes RJ45 comunication cables.4 units x 2 m. long.4 units x 6 m. long.
Line Array Accessories
FC-X12/15Flight Case for 2 units
FC-X18Flight Case for 2 units
Aren’t you willing to listen?
Tel. +34 93 735 65 65
Check our web site and look for your nearest distributor
xcellence.master-audio.com
From now on everyone would like to be
Amate Electroacústica, s.l.
Polígono Industrial NorteC/ Pepinyà, 25 - 08226 Terrassa (BCN)
Tel. +34 93 735 65 65Fax +34 93 735 60 48
www.master-audio.com/xcellencePrinted in Spain - April 2010
Advanced sound systems since 1972