igc code

2
1 Application carrige of liquified gases having a vapour press a All ships irrespective of size including those of less than 5 b Construction identifable with the ship begin c assembly of that ship has commenced atleast 50tons or 1% of m on or after 1st October 1994. Note:- Ships constructed before 1st Oct 1994 are to comply wi ### 2 Valve closure time from initiation of v/v to valve vlosure ti 3600 U sec LR m3 LR is maximum loading rate between sh m3/hr 3 Cofferdam,ballast or void spaces at the after end of the afte 4 Cargo service space are workshop locker & store rooms of more equiment 5 Cargo containment system Integral tanks Design vapour pressure should not normally exceed 0.25bar how 0.7bar or less Membrane tanks:- Are non self supporting tanks which consist of thin layer(mem by adjacent hull structure at a temp of 37.8 0 c u is ullage volume at operating hold spaces are excluded form Cargo area. Boiling point of cargo tanks should be below -10 0 C

Upload: dheerajkaushal

Post on 29-Sep-2015

23 views

Category:

Documents


1 download

DESCRIPTION

IGC CODE

TRANSCRIPT

IGC1Application carrige of liquified gases having a vapour pressure exceeding 2.8bar absoluteat a temp of 37.80caAll ships irrespective of size including those of less than 500grtbConstruction identifable with the ship begincassembly of that ship has commenced atleast 50tons or 1% of masson or after 1st October 1994.Note:- Ships constructed before 1st Oct 1994 are to comply with resolution MSC.5(48) adopted17-Jun-832Valve closure time from initiation of v/v to valve vlosure time should not exceed3600 UsecLRu is ullage volume at operating signalm3LR is maximum loading rate between ship & shorem3/hr3Cofferdam,ballast or void spaces at the after end of the aftermost or forward end of the forwrd mosthold spaces are excluded form Cargo area.4Cargo service space are workshop locker & store rooms of more than 2m2 in area used for cargoequiment5Cargo containment systemIntegral tanksDesign vapour pressure should not normally exceed 0.25bar however hull scantlings are increased0.7bar or lessBoiling point of cargo tanks should be below -100CMembrane tanks:-Are non self supporting tanks which consist of thin layer(membrane) supported through insulationby adjacent hull structure