igcomlge02 final copy spec sheets/starbeam spec sheet… · read these instructions carefully...
TRANSCRIPT
Stainless Steel Ring
I�-G����� LED L���� S�����
Dimensions
Slip Resistant Lens
To IncludeLED Driver Directional Louver
*
StarBeam IN-GROUND LED FLAGPOLE LIGHT
3 year warranty on LED ModuleOne year warranty on the fixtureETL LISTEDFixture must be installed by a licensed electricianPhotocell sold separatelyConcrete Pour Kit required for concrete installationLED Average Rated Life with Photocell: 50,000 HoursCRI: 805000 Kelvin4300 lumens25 Watt LED Plate
with Etched GlassIncludes Stainless Steel Ring & Non-Slip,Walk-over Lens
FEATURES & SPECIFICATIONS
instructions below.according to Eagle Mountain Flag & Flagpole installation This well light is an in-ground fixture and should be installed Mounting:
or flake.composite housing. With proper maintenance, will not peel Compression molded, fiberglass reinforced polyester Construction:Multiple lights may be needed for your application
Recommended for Flagpoles up to 100'
offer! Easy installation, just wire and go!LED In-Ground Flagpole light the industry has to The ONLY completely assembled, factory sealed,
the ground conned to a separate section.conduit,which keeps any water absorbed from the driver separated from the wiring new anti-siphon chamber. This chamber keeps redesigned all of our in-ground buckets with a buildup inside in-ground fixtures, we have To combat the increasing problem of water
Eagle Mountain Flag & Flagpole 333 FM 2325 Wimberley, TX 78676
Required for concrete installations
Concrete Pour Kit* Photocell
Additional Fixture Options & Accessories
Multi-tap 120 - 277V AC (0.2A per fixture @120V)