iguzzini - iroad
DESCRIPTION
Katalóg svietidiel iRoad. Catalogue of iGuzzini lamps iRoad.TRANSCRIPT
iRoad
Optic with silk-screened
glass
Upward emission of light
flow = 0
Optical assembly opens
easily and removable plate
Cosmowhite 140 W
Master Colour 250 W
1
iGuzzini
iRoad
Internal Lighting SystemsThe internal catalogue illustratesinternal fittings.
External Lighting SystemsThis catalogue presents the wholeiGuzzini range of external fittings.
Catalogue news 2005This catalogue introduces the NewProducts for Indoor and OutdoorLighting Systems for the year 2005.
2
iRoad fittings for street and residentiallighting can be described many ways:uniform light, no glare, no upwarddispersion, in full compliance withthe standards that govern against lightpollution, a strong and technicalimage but with great design anddécor. iRoad can also be installed inparks and other landscaped areas, andparking lots. iRoad means city lightingisn't only something that's functional,but something that communicates alook and feel.
3
iGuzzinidesign J. M. WilmotteiRoad
scale 1:200
Height: 10000 mm.
Height: 8000 mm.Link roads, squares, avenueswith intense traffic, crossroads.
Height: 6000 mm.Squares, avenues andmoderate traffic, crossroads.
4
iGuzzinidesign J. M. WilmotteiRoad
Road optics ((SSTT))
The Road optics make it possible toobtain a greater distance between theposts, consequently with fewerfixtures, less visual impact, lowerpurchase, maintenance and powercosts.
Asymmetric Optic (A45°)The Asymmetric optic allows glareand light pollution to be drasticallyreduced and and also curbs stray lightfalling onto facades of buildings.
h
a
Uo
UL
1 m0,5 m
8,3 m
h
a
L1L2
Uo
UL
1 m0,5 m
4,4 m
h
a
h
a
L1L2
These fittings have professional, roador flood asymmetric optics; arms thatextend horizontally; and a range ofdischarge lamps that allow one tochoose the most appropriatechromatic yield for each context.These top-performance fittings were
especially designed for lighting roadsand large open areas for public andprivate use. The iRoad optics haveundergone a special treatment makingthem resistant to atmospheric agentswhile maintaining their operationscapabilities.
HST-DE 150 W Rx7s
HST-DE 70 W Rx7s
HST-DE 70 W Rx7s
HST-DE 150 W Rx7s
Uo= Average uniformity of zone examined UL= Longitudinal uniformityLmed= Average luminance in cd/m2
h= Installation heighta= Distance between polesTI= Physiological glare
h
6 m
a
22,2
Uo
0,43
UL
0,80
Lmed
1,01
TI%
0,12
h
8 m
a
36,7
Uo
0,40
UL
0,66
Lmed
1,01
TI%
0,18
h
10 m
ill. ab.L1xL2 Emax Emed a
19x19 m 48,77 lux 23,67 lux 19 m
h
8 m
ill. ab.L1xL2 Emax Emed a
15x15 m 48,92 lux 27,81 lux 15 m
Two entries for cables
• Direct lighting system, for use withmetal and sodium halide lamps.
• Installed on a pole or wall-mounted.• The fixture has the following major
components: optical assembly, pole,overhanging arm (single or double),intermediate arm, and wall-mountattachment.
• Optical assembly and frame inaluminium alloy, with dual chromiumplating, followed by passivationheat treatment at 120° C, acrylicRAL 9007 paint finish. Sodium-calcium tempered sealing glasswith customized silk-screening.The frame is fastened to the opticalassembly with two stainless steelcaptive screws and a hinge systemthat allows it to be easily opened. 99,5% ultrapure aluminiumreflector, 5-6 micron doublehigh-bright finish, with an anodizingtreatment. Vertical orientation witha graduated scale. Reflector groupsecured with captive screws.Porcelain lamp holder securedwith anodized aluminium supportsand cables with quick-connectingterminals. The lamp is equippedwith an anti-loosening device.
• When opening the optical assemblythe decompression valve eliminatesthe internal depression.
• Pull-out control gear plate made ofanodized aluminium. Power supplywith ballast, non-explosive powerfactor correction capacitor,quick-connecting terminals.A disconnecting switch withfuse is available upon request.
• Double insulation and readyfor Class I grounding
• Thanks to the adjustability of theoptical assembly, there is no lightdispersion into the upperhemisphere above this luminaire.
• All external screws are stainlesssteel. AISI 304.
• Pole is equipped with a singleor a double arm. To be orderedseparately.
• Arms for wall-mounting, or forintermediate installation on poleswith D=159mm, made of die-castaluminium and galvanized steelsheet, with a liquid RAL 9007acrylic paint treatment.
• The technical characteristics of thefitting comply with EN60598-1standard.
• IP67 IK07• F seal• IMQ-ENEC approval• Class of Insulation II (with provisions
for Class I upon request)
Optical assemblyopens easily
Removable plate
Upward emission oflight flow = 0
Disconnecting switchand fuse upon request
Optic with silk-scree-ned glass
Class II,Class II, withprovisions for Class I
(upon request)
Innovative lamps:Cosmowhite 140W,
Master Colour 250W
5
iGuzzinidesign J. M. WilmotteiRoad DIRECT LIGHTING SYSTEMS FOR URBAN AREAS
Sim
ulat
ion
Decompression valve
6
The pole is available in two versions,with fixing plate or for burying.
Application of the various types ofpoles/arms, in single, double, wall-mounted, and intermediate versions.The mechanical resistance of theentire system is guaranteed only byoriginal iGuzzini components.
7
Wall-mounting installation isthe ideal solution when lightingsmaller areas because iRoad isextremely orientable and eliminatesparasite lighting phenomena ontovertical supporting walls.
pole with arm
The commercial order should becompleted based on the elementsmaking up the system.
optical assembly
iGuzzinidesign J. M. WilmotteiRoad
sales order
70 W Rx7s HIT-DE/HST-DE
15
D-C
H
1863
GB B944**
door keyterminal box
0246
60008000
10000B943*
60008000
10000
8
1530
1531
1532
1533
1534
1535
1536
1537
1538
1539
1540
1541
code colour
00
pole code colour
00
6000
8000
10000
scala 1:100
2800 1450620 2100
313
380
The terminal blocks have four polarities withthree ways per pole and are fitted for bridgewiring. They are made with class II insulationCode 1863 is equipped with two fuse holdersfor dim. 10,3x38 - 380 V - max 20A. Suitable forpower cables with cross-section 16 mm2 oninput and 2.5 mm2 on output to hook up withthe light source.
313
129
214
183
87
585
floodlight code lamp optic
ST
A(45°)
B403
B404
B406
B405
B407
B408
B410
B409
colour intermediatearm wall mounting
127
197
75
code
1128
colour
15
code
1129
colour
15
82
197
75
150 W Rx7s HIT-DE/HST-DE
140 W PGZ12 HST (CPO-TW)*
250 W G12 HIT (CDM-T)**
70 W Rx7s HIT-DE/HST-DE
150 W Rx7s HIT-DE/HST-DE
140 W PGZ12 HST (CPO-TW)*
250 W G12 HIT (CDM-T)**
*new Cosmowhite (Philips)** new Master Colour City (Philips)
The intermediate arm is suitable for installationon all poles.
All the combinations illustrated can beobtained by combining the single elementspresented in the tables.
code h pole
accessories forEuropean poles
The poles featured in the tables are suitablefor fixing on Italian, French and Spanishterminal blocks. For other countries,add the specific fixing systems featuredin the table.
* DIN guide for D and CH** Marine grade plywood support for terminal
board for GB
scale 1:100
base
for
pol
e
sing
le
9
2800 2800 1450 620
313
iGuzzinidesign J. M. WilmotteiRoad
350
50
150
8000
1000
1000
ø160
400
300
310x95
L=500ø 24 35
0
50
150
1000
010
00
1000
ø160
400
300
310x95
L=500ø 2435
0
50
150
800
6000
ø160
100
280
200
1000
310x95
L=500ø 18
100
100
1200
1200
1200
code length
6800
6000
colour
74
ø
1601530
1533
sing
le
code length
9000
8000
colour
74
ø
1601531
1534
sing
le
code length
11000
10000
colour
74
ø
1601532
1535
doub
le
code length
6800
6000
colour
74
ø
1601536
1539
doub
le
code length
9000
8000
colour
74
ø
1601537
1540
doub
le
code length
11000
10000
colour
74
ø
1601538
1541
The base for pole is suitable for installation onall poles.
03
15 74
Units for burying are supplied with ananticorrosion reinforcing collar to be fitted onthe part which comes out of the ground.The other units are supplied with a base plateand fixing bolts in 70 micron hot galvanisedsteel, as per UNI regulation 5744-66.
DIRECT LIGHTING SYSTEMS FOR URBAN AREAS
code size
ø 620
184
colour
041842
Fixing plate with anchoring boltscode 1167 for poles code 1533-1539
Fixing plate with anchoring boltscode 1165 for poles code 1534-1540
Fixing plate with anchoring boltscode 1165 for poles code 1535-1541
���
��� ��
α�
���
����
����
�� � �� �� �� � � � � �
���������
���
��� ��
α�
����
����
�� �
�� � �� �� �� � � � � �
����� �����
���
��� ��
α�
����
�����
����
�� � �� �� �� � � � � �
��������� ���
���
��� ��
α�
����
���
�� ��
�� �� � �� �� � � � � �
�������� ��
�� � � � � � �� �� �� �� �� �
�
� � ��
α ��
����
���
�� �� �����������������
�� � � � � � �� �� �� �� �� �
�
� � ��
α ��
����
�����
�������������������
�� � � � � � �� �� �� �� �� �
�
� � ��
α ��
����
����
�� ��������������
�� � � � � � �� �� �� �� �� �
�
� � ��
α ��
���
����
����������������
���
��
���
����
���
����� ������� ����������� �γ
�����������
� ���
��
���
�������
��������
�������������
�����������
���� �
���
!"
���
��
����������
������ ����� ������ �����
������ � ����
�� �
������ � ���
���
��
����������
������ ����� ������ �����
������ � ����
��� �
������ � ���
���
��
����������
������ ����� ������ �����
������ � �����
��� �
������ �
���
��
����������
������ ����� ������ �����
��� ����� � ���
��� �
������ � ���
���
��
���
����
���
������ ������ ������� ���γ
�����������
��
��
���
������
���������
��������������
���� ������
����
���
!"�
���
��
���
����
���
����� ������� ����������� �γ
�������� ���
� ��
��
���
��� ���
������� �
�������������
����������
��!�"��
���
#$�
���
��
���
����
���
����� ������� ����������� �γ
��� ���������
�� ��
��
���
��� ���
��������
�������������
������� ��!
������
���
"#�
10
iGuzzinidesign J. M. WilmotteiRoad
Asymmetrical optic 45°B407 70 W HIT-DE A45°
70 W HST-DE A45°B408 150 W HIT-DE A45°
150 W HST-DE A45°B410 140 W HST(CPO-TW) A45°B409 250 W HIT(CDM-T) A45°
code lamp optic
B403 70 W HIT-DE ST70 W HST-DE ST
B404 150 W HIT-DE ST150 W HST-DE ST
B406 140 W HST(CPO-TW) STB405 250 W HIT(CDM-T) ST
Road Optic
DIRECT LIGHTING SYSTEMS FOR URBAN AREAS
15
IP66 IK07
IP66 IK07
03
313
129
214
183
87
585
313
129
214
183
87
585
11
iGuzzinidesign J. M. WilmotteiRoad
• Supplied in versions with a base-plate and for cementing directlyinto the ground. Available in thefollowing lengths 6 m, 8 m and10 m (length includes arm).
• Poles made of EN10025-S235JRhot galvanized 70 micron steel incompliance with UNI EN ISO 1461(EN 40-5) standards.
• Texturised RAL 9005 powder-coating paint surface finish.
• The pole has a cylindrical crosssection with a 159 mm diameter
• A metallic galvanized steel plate issecured to the upper portion of thepole. It has holes for the fasteningof the arms. At about 4 m aboveground, there are two perforationsand stainless steel inserts thatsecure the intermediate arm.
• The h=6/8m above the ground is 3m thick; the 10m above theground pole is 4 mm thick
• The model that can be cementedinto the ground has a cable slot thatis 150x50mm.
• Anchoring plate is made of 70micron hot galvanized steel, and has4 slots. The plate has tie rods thatsecure it to the ground (to beordered separately).
• Flush 310x95mm access covermade of aluminium alloy and hasa watertight gasket.
• 4-pole terminal block with threeconnections per each pole anddouble integrated fuse; designedfor 16mm2 feed cables and 2,5mm2
exit cables that connect the lamp.• Suitable for terminal blocks that are
Italian, French, Spanish (only small),and English (with B944 marine gradeplywood adapter that can be orderedseparately), and German/Swiss(with B943 DIN guide that canbe ordered separately).
• Internal grounding system withgrounding lug, steel insert, andstainless steel screw.
• Equipped with single or double arm,with respective lengths of 1450mmand 2800mm. The vertical part ofthe arm is made of 100x20mm steelprofile. The horizontal part of thearm is made of steel sheet with hotgalvanized cover. Texturized RAL9007 acrylic paint surface treatment.
• Arms secured to pole via 4 M10UNI5931 AISI 304 stainless steelscrews.
• IP44
Flush inspection lidIP44 suitable forterminal boards UK - F - CH - E
Arm connected flushwith pole
Plate with slot
DIRECT LIGHTING SYSTEMS FOR URBAN AREAS
Sim
ulat
ion