ilm artic3.0 agosto2019 eng -...
TRANSCRIPT
SMART INTEGRATION OF SERVERS AND NETWORKING
ARCTIC 3.0
INDEXMain advantages
Rack types
ASP rackNET rackISP rack
Accessories
Doors and panels19” MountsCovers and shelvesCable managementPDU supports and other accessoriesAirflow managementSecurity and controlInstallation and maintenance
General dimensions
ASP rackNET rackISP rack
DATACENTER system
04
14
162024
26
2630343844485054
58
596061
62
SAIFOR is a leading company in the design, manufacturing and integration of high-performance solutions for Datacenters and Control Rooms.
The SAIFOR group designs and produces its products entirely in Barcelona (Spain). The production plant has state of the art machinery that gives us the greatest flexibility to adapt to the individual requirements of our clients, as well as strict compliance with our commitments and Environmental Responsibility Policies.
SAIFOR is positioned as an advanced technological company, offering highly reliable and durable products that strictly comply with the most demanding European quality standards.
2019www.ilm-saifor.es Main advantages
Main advantages04 05ARCTIC 3.0
ARCTIC 3.0Main advantages
Compact and Resistant
Cable Management
Security
Electrical Safety
Installation and Maintenance
Thermal Management
Smart PDU
06
06
08
09
10
12
13
Main advantages
2019
MainADVANTAGES
Compact and Resistant
With , the ARCTIC 3.0 rack's structural design provides an enlarged equipment storage capacity and ensures effective protection of the installed equipment.
static load-bearing capacity of 1500 Kg
+
Cable Management
MAXIMUM CABLE ENTRY
The structure's new design, fully open on the top and bottom, to the cabinet interior.maximizes cable entry
06 07ARCTIC 3.0
Main advantages
+
SIDE COVERS WITH BRUSH INSERTS
The new covers with brush inserts fitted on the cabinet sides into the rack, allowing an easier cable insertion.
optimize the entry of cables
CABLING PROTECTION
To protect the cable bundles entering the cabinet through the top, have been fitted to relieve stress and avoid cable pinching.
inlets with a gentle bending radius
SIDE CABLE TRAYS
The cables running down inside the rack are supported by the cable tray which, in combination with the fingers, the grommet rings and the rollup spools, assist in the correct
. The location of the tray in the cabinet is fully adapted to the cable entry, allowing smooth, continuous flow of the cables, with no sharp bends.
distribution of the inner cabling
19” NET MOUNT
The 19” mount concept has been fully redesigned to ensure of the equipment. The mount has a
number of strategically placed holes which provide great versatility in the location of , such as , rollup and horizontal management for each 19” unit.
optimal cable organization
cable management accessoriesprotective frames spools
fingers
+
+
+
+
CABLE ACCESSORIES
The new ARCTIC 3.0 comes with a wide range of accessories that assist in . Different section grommet rings, horizontal management fingers, optical fiber rollup spools, 1-side and 2-sides 19” horizontal organizers with rings, protective frames… etc, all of them made of plastic and with rounded edges to avoid harming the cables.
managing and arranging the rack cabling
+
www.ilm-saifor.es
ARCTIC 3.0 DOORS
The new ARCTIC 3.0 door is lighter and more rigid than the previous version. It comes with a as a standard feature. The lock system can be extended to
when required by security specifications. The meets all the possible requirements of a data processing center. Available models include or master-key locks, with or without key, manual push button locks and locks, ideal for .
1-point lock
four points as an optionwide range of locks
single-keymechanical combination locks
electromechanicalconnecting to the facility's BMS
Security
+
ARC-GUARD ACCESS CONTROL
The new ARCTIC 3.0 cabinet is complemented with the . Locks with
, , or and software-driven centralized remote access
control allow for a more effective key management plan, remote opening by rack, group and zone and a significantly lower operating cost than with a traditional key control plan.
advanced ARC-GUARD access control system integrated RFID technology HID boards IP or RS-485 communication protocolsecurity keypad
SIDE PANELS
With slam . For enhanced security, the range includes the option of installing an additional blocking mechanism inside the cabinet, ensuring that the panels need to be unlocked from the inside first.
lock and security key
+
+
Main advantages08 09ARCTIC 3.0
2019 Main advantages
For , the range of locks is complemented with the new ARC-GUARD access control system.
enhanced security and active control
EQUIPOTENTIAL BONDING
SAIFOR is particularly committed to maintaining a high level of in our products. This is especially evidenced by the protection against any electrical
discharges that might occur within the enclosures. All the cabinet components are electrically connected to each other, ensuring the overall equipotential bonding of the rack.
protection for both the operators and the equipment installed
Electrical Safety
+
ELECTROSTATIC PROTECTION
As a means of of the equipment against generated by the engineers who are
installing and handling the equipment, the ARCTIC 3.0 range also features an ESD discharge point and flexible wrist wrap.
It meets the specifications of standard UNE-EN 61340-5-1/2.
passive protectionelectrostatic discharges
+
www.ilm-saifor.es
Main advantages10 11ARCTIC 3.0
Main advantages
QUICK CONNECTOR GROUND WIRES
All the rack's moving components (doors and panels) are fitted with equipotential bonding for easy and fast handling
quick connectors
+GENERAL GROUND CONNECTION POINT
In accordance with electrical standard UNE-EN 60950-1 the are concentrated in a main ground point.
electrostatic and ground discharges
+
Installation and Maintenance
Quick installation has a direct impact on the commissioning of the infrastructure, considerably reducing installation costs. At SAIFOR we are aware of the importance of this factor and have devised a strategy to
times for critical components and accessories.speed up the installation
and maintenance
MOUNTS AND CABLE TRAYSCONTINUOUS ADJUSTMENT
The new NET and ZAF 19” mounts, as well as the conduits, have been redesigned to allow
. For ea9er adjustment, a metered hole gage has been added.
continuous depth adjustment
+
TOOL-LESS KITS
The ARCTIC 3.0 cabinet's innovative mount and cable tray mounting system allows, by simply adding the tool-less kit, to perform the adjustment of mounts and cable trays , resulting in even swifter and more convenient installation.
without using tools
+
ADJUSTABLE FEET HEIGHT
A new, improved adjustment system allows, convenient and effortless leveling of the
rack height. The adjustment system is accessed from inside the rack, in a
.
easy
convenient and ergonomic location
+
FRONT BAYING KIT
Simplifies the joining of racks in rows. The joining is performed from the outside, on the , avoiding any interference with the cabinet's internal parts and allowing easier assembly and disassembly of rack rows. Compatible with fitted doors.
front part
QUICK FIT SHELVES
With a smart and toolless mounting system, allowing , of fixed and telescopic shelves.fast simple installation
+
TRANSPORT
At SAIFOR we believe the installation of a cabinet starts from the moment it comes out of the truck and is unpacked from the pallet. That is why we have paid special attention to the way the rack is removed from the pallet, developing a new, innovative system of
, for improved, swift and safe lowering of the rack from the pallet. Thanks to the (optional) once the rack is on the floor, it can be freely moved around the facility without needing a pallet truck.
built-in rampstransport casters
+
INSTALLATION LIGHT
LED lights can be into the front and rear of the rack to enhance visibility inside the cabinet. As an option, the light on/off switch can be .
integrated
synchronized with the door opening
+
DOUBLE DOORS
For extra in installations with narrow aisles.convenience
+
+
2019www.ilm-saifor.es
Main advantages
Main advantages12 13ARCTIC 3.0
Thermal Management
19” ZAF (ZERO AIR FLOW)
19” ZAF (Zero Air Flow) mount concept provides an effective generated inside the rack without
losing cabling capacity on the cabinet sides. As an option with ZAF 2U x 3 mounts the useful rack height can be increased with
, without increasing the rack height with the ZAF 2Ux3 mount version.
MOUNTS
barrier against the air flows
12U (vertical)
+
BOTTOM COVERS FOR AISLE SEALING
Compact bottom covers . They combine extreme with an aesthetic finish.
air recirculationswiftness and effectiveness
+
VENTILATION WITH ELECTRONICTHERMOSTAT
Ventilation units specially designed for . Fitted on the top of the rack, with
fans and thanks to the configurable electronic control.
active management of low thermal loads low noise
minimal power consumption
BLANKING 19” PANELS
Available in 1U or 3U, they are especially suited for covering all the equipment-free 19” units, sealing the open front space and preventing air mixing and air currents inside the rack. Their
design allows easy mounting.quick clip-on
+
IMPROVED VENTILATED DOORS
ARCTIC 3.0 door design offers an improved efficiency, combining an increased ventilation surface and a honeycomb hole pattern allowing .80.4 % free air passage
+
HIGH EFFICIENCY BRUSHES
High density brushes of ARCTIC 3.0 .
increases airtightness and cable section capacity
+
Smart PDU
ACCOMMODATES POWER DISTRIBUTION UNITS
The ARCTIC 3.0 is ready for mounting any model of the brand intelligent PDU family. Other PDUs of the on the market can also be installed by adding the mounting kit.
SERVERTECHmost popular brands
+
ZERO U PDU BRACKETS
The cable trays and for the PDUs are carefully designed to minimize the required installation space and avoid interferences with equipment in the 19” area.
universal brackets
+
+
2019www.ilm-saifor.es
Type of racks
Type of racks14 15ARCTIC 3.0
ARCTIC 3.0Rack types
ASP SERVER RACK
19” RACKS FOR SERVERS AND ACTIVEEQUIPMENT
The ASP range has been created to provide a high level of security and stability, easy installation and maximum natural ventilation in the most demanding high-density datacenter environments. With 1000 or 1200mm depth, the ASP range can virtually accommodate all server models on the market. With SAIFOR's revolutionary sliding ZAF mount system, the mount can be fitted at any depth, assuring air containment without requiring disassembly.
+
NET CABLING RACK
19” RACKS FOR NETWORKING ANDSTRUCTURED CABLING
The NET range offers installers numerous advantages and features for high density cabling. The longitudinal openings on its top and bottom areas allow easy entry of cables through the cabinet sides, avoiding loops and sharp bends that might damage the cables. Inside, the cables can be guided to any area of the cabinet in the most convenient and safe way by means of a wide range of dedicated cable organising accessories.
+
ISP COLLOCATION RACK
19” RACKS FOR SERVER HOUSING ANDEQUIPMENT
A full range of racks for Housing centers and facilities, including models with 2, 3 or 4 compartments. The ISP range offers a high level of security in each compartment. All compartments are separated from each other covering the entire internal perimeter. Vertical cable trays are independent for each space.
+
ASP BASIC
ASP PREMIUM
NET BASIC
NET PREMIUM
ISP
16
18
20
22
24
2019www.ilm-saifor.es
ARCTIC3.0ASPServer rack
Type of racks / ASP BASIC
T / ASP BASICtype of racks16 17ARCTIC 3.0
Sheet metal
Enclosure frame RAL 7021Internal parts RAL 9005 (change in all rack types)
Width: 600 / 800 mmHeight: 42U / 47UDepth: 1000 / 1200 mm
42U / 47U
1 Frame2 Side panels (panel version)2 Vented doors (1 point)2 ZAF 19” mounts (front)2 NET 19” mounts (rear)1 Top brush cover1 Baying kit (extension version)4 Adjustable feet1 Earth continuity kit
According to 19” norm: IEC 60 297 / DIN 41 494 / UNE 20 539
1500 kg
Material:
Surface finish:
Dimensions:
Installation height for components:
Standard supply:
Standards:
Static load rating:
PRODUCT DESCRIPTION+
ASP BASIC
Supplied fully assembled and packed. If specified in the order, accessories are supplied fitted in the required positions.
+
2019
PART NR Doors Width
(mm) Installation height (U)
Height (mm)
Depth (mm)
with panels
without panels
Front Rear
C.0088484 C.0088492
C.0088486 C.0088494 C.0088488 C.0088496
C.0088490 C.0088498
C.0088365 C.0088373 C.0088367 C.0088375
C.0088369 C.0088377
C.0088371 C.0088379 C.0088485 C.0088493
C.0088487 C.0088495
C.0088489 C.0088497 C.0088491 C.0088499
C.0088366 C.0088374
C.0088368 C.0088376C.0088370 C.0088378
C.0088372 C.0088380
Vented
Vented
600
42U 2000 1000
1200
47U 2200 1000
1200
Double vented
42U 200010001200
47U 2200 1000
1200
Vented
Vented
800
42U 20001000
1200
47U 2200 10001200
Double vented
42U 2000 1000
1200
47U 2200 1000
1200
www.ilm-saifor.es
Type of racks / ASP PREMIUM
Type of racks / ASP PREMIUM18 19ARCTIC 3.0
Sheet metal
Enclosure frame RAL 7021Interior installation RAL 9005
Width: 600 / 800 mmHeight: 42U / 47UDepth: 1000 / 1200 mm
42U + (12U extra, width 800)47U + (12U extra, width 800)
1 Frame2 Side panels (panel version)2 Vented doors (4 points)2 ZAF 19” mounts (front) + 12 blanking panels (3x2U)2 NET 19” mounts (rear)2 PDU vertical tray support1 Kit PDU (x2) bracket universal1 Top cabling cover with bend radius protection1 Baying kit (extension version)4 Adjustable feet1 kit assembly group square holes 9.5mm (x50 M6)1 Earth continuity kit
According to 19” norm: IEC 60 297 / DIN 41 494 / UNE 20 539
1500 kg
+
ASP PREMIUM
+
2019
PART NR Doors Width
(mm) Installation height (U)
Height (mm)
Depth(mm)
with panels
without panels
Front Rear
C.0088500 C.0088508
C.0088502 C.0088510 C.0088504 C.0088512
C.0088506 C.0088514
C.0088381 C.0088389 C.0088383 C.0088391
C.0088385 C.0088393
C.0088387 C.0088395 C.0088501 C.0088509
C.0088503 C.0088511
C.0088505 C.0088513 C.0088507 C.0088515
C.0088382 C.0088390
C.0088384 C.0088392 C.0088386 C.0088394
C.0088388 C.0088396
Vented
Vented
600
42U 2000 1000
1200
47U 2200 1000
1200
Double vented
42U 2000 1000 1200
47U 22001000
1200
Vented
Vented
800
42U 2000 1000
1200
47U 22001000 1200
Double vented
42U 2000 1000
1200
47U 2200 1000
1200
Material:
Surface finish:
Dimensions:
Installation height for components:
Standard supply:
Standards:
Static load rating:
PRODUCT DESCRIPTION
It is supplied ready assembled and packed. If specified in the order, accessories are supplied fitted in the required positions.
www.ilm-saifor.es
ARCTIC3.0NETNetwork & cabling rack
Type of racks / NET BASIC
Type of racks / NET BASIC20 21ARCTIC 3.0
+
NET BASIC
+
2019
PART NR Doors Width
(mm) Installation height (U)
Height (mm)
Depth (mm) with panels
without panels
Front Rear
Douv
le v
Material:
Surface finish:
Dimensions:
Installation height for components:
Standard supply:
Standards:
Static load rating:
PRODUCT DESCRIPTION
It is supplied ready assembled and packed. If specified in the order, accessories are supplied fitted in the required positions.
Sheet metal
Enclosure frame RAL 7021Interior installation RAL 9005
Width: 600 / 800 mmHeight: 24U / 42U / 47UDepth: 800 / 1000 / 1200 mm
24U / 42U / 47U
1 Frame2 Side panels (panel version)2 Vented doors (1 point)4 NET 19” mounts1 Top brush cover1 Baying kit (extension version)4 Adjustable feet1 Earth continuity kit
According to 19” norm: IEC 60 297 / DIN 41 494 / UNE 20 539
1500 kg
600 800
1000 1200800
1000 1200 800
1000 1200 800
1000 1200 800
1000 1200 600 800
1000 1200800
1000 1200 800
1000 1200 800
1000 1200 800
1000 1200
www.ilm-saifor.es
Type of racks / NET PREMIUM
Type of racks / NET PREMIUM22 23ARCTIC 3.0
+
NET PREMIUM
+
2019
PART NRDoors Width
(mm)Installationheight (U)
Height(mm)
Depth(mm)with panels without panels
Front Rear
U
Vented
Vented
600
42U 2000 800
1000 1200
47U 2200 800
1000 1200
Double vented
42U 2000800
1000 1200
47 2200 800
10001200
Vented
Vented
800
42U 2000 800
1000 1200
47U 2200 800
1000 1200
Double vented
42U 2000 800
1000 1200
47U 2200 800
1000
C.0088572 C.0088576 C.0088532 C.0088540 C.0088534 C.0088542 C.0088574 C.0088578 C.0088536 C.0088544 C.0088538 C.0088546 C.0088556 C.0088560 C.0088413 C.0088421 C.0088415 C.0088423 C.0088558 C.0088562 C.0088417 C.0088425C.0088419 C.0088427 C.0088573 C.0088577 C.0088533 C.0088541 C.0088535 C.0088543 C.0088575 C.0088579 C.0088537 C.0088545 C.0088539 C.0088547C.0088557 C.0088561 C.0088414 C.0088422 C.0088416 C.0088424 C.0088559 C.0088563 C.0088418 C.0088426 C.0088420 C.0088428 1200
Material:
Surface finish:
Dimensions:
Installation height for components:
Standard supply:
Standards:
Static load rating:
PRODUCT DESCRIPTION
It is supplied ready assembled and packed. If specified in the order, accessories are supplied fitted in the required positions.
Sheet metal
Enclosure frame RAL 7021Interior installation RAL 9005
Width: 600 / 800 mmHeight: 42U / 47UDepth: 800 / 1000 / 1200 mm
42U / 47U
1 Frame2 Side panels (panel version)2 Vented doors (4 points)4 NET 19” mounts2 Vertical cable tray 125mm (800) or 250mm (1000/1200)1 Kit fingers 150mm+ rings (x12) + frames (x14)1 Kit PDU bracket to column1 Top cabling cover with bend radius protection1 Baying kit (extension version)4 Adjustable feet1 kit assembly group square holes 9.5mm (x50 M6)1 Earth continuity kit
According to 19” norm: IEC 60 297 / DIN 41 494 / UNE 20 539
1500 kg
www.ilm-saifor.es
ARCTIC3.0ISPCollocation rack
Type of racks / ISP
Type of racks / ISP24 25ARCTIC 3.0
+
+
2019
Material:
Surface finish:
Dimensions:
Installation height for components:
Standard supply:
Standards:
Static load rating:
PRODUCT DESCRIPTION
It is supplied ready assembled and packed. If specified in the order, accessories are supplied fitted in the required positions.
Sheet metal
Enclosure frame RAL 7021Interior installation RAL 9005
Width: 600 / 800 mmHeight: 42U / 47UDepth: 1000 / 1200 mm
Rack 47U40U (10U x4 compartments)42U (14U x3 compartments)46U (23U x2 compartments)
Rack 42U36U (9U x4 compartments)39U (13U x3 compartments)42U (21U x2 compartments)
1 Frame2 Side panels4,6 or 8 Vented doors (1 point mechanical combination)4 19” mounts per compartment1 Separation Tray8 cable duct channels4 Adjustable feet1 Earth continuity kitAccording to 19” norm: IEC 60 297 / DIN 41 494 / UNE 20 539
1500 kg
PART NR Number ofdoors
Width(mm)
Height(U)
Compartment height
Height(mm)
Depth(mm)
C.0088717
2P
60042U 21U 2000
1000C.0088718 1200C.0088719
8001000
C.0088720 1200C.0088721
60047U 23U 2200
1000C.0088722 1200C.0088723
8001000
C.0088724 1200C.0088725
3P
60042U 13U 2000
1000C.0088726 1200C.0088727
8001000
C.0088728 1200C.0088729
60047U 14U 2200
1000C.0088730 1200C.0088731
8001000
C.0088732 1200C.0088733
4P
60042U 9U 2000
1000C.0088734 1200C.0088735
8001000
C.0088736 1200C.0088737
60047U 10U 2200
1000C.0088738 1200C.0088739
8001000
C.0088740 1200
www.ilm-saifor.es
ACCESSORIES / Doors and panels26 ARCTIC 3.0
ACCESSORIESDoors and Panels
Doors Vented door Double vented door Steel door Double steel door Glass door LED belt
Panels Side panel Brush side panel Internal mounting kit
272727282828
292929
2019
27
ACCESSORIES / Doors and panels
Doors
VENTED DOOR
Perforated door with great maximized surface to increase the ventilation of the equipment installed inside the rack. Made with perforated sheet metal allowing 80.4% free air passage. One-point lock, upgradable to 4. Multiple closing handle options available.
Material: Sheet metalFinish: RAL 7021
E.0029368E.0029369
E.0029370E.0029371
E.0029372 E.0029373
VENTED DOOR 24U 600 VENTED DOOR 24U 800
VENTED DOOR 42U 600 VENTED DOOR 42U 800
VENTED DOOR 47U 600 VENTED DOOR 47U 800
Two-leaf perforated door, particularly suitable for narrow aisles. Allows 80.4% free air passage. Two-point lock. Multiple closing handle options available.
Material: Sheet metalFinish: RAL 7021
DOUBLE VENTED DOOR+ E.0029374E.0029375
E.0029376E.0029377
E.0029378 E.0029379
24U 600 DOUBLE VENTED DOOR 24U 800
DOUBLE VENTED DOOR 42U 600DOUBLE VENTED DOOR 42U 800
DOUBLE VENTED DOOR 47U 600DOUBLE VENTED DOOR 47U 800
DOUBLE VENTED DOOR
+
STEEL DOOR
Solid door, for cabinets with extra privacy or protection requirements. Prepared for installation of the optional IP50 protection kit. One-point lock, upgradable to 4. Multiple closing handle options available.
Material: Sheet metalFinish: RAL 7021
+ E.0029404E.0029405
E.0029406E.0029407
E.0029408E.0029409
STEEL DOOR 24U 600 STEEL DOOR 24U 800
STEEL DOOR 42U 600 STEEL DOOR 42U 800
STEEL DOOR 47U 600 STEEL DOOR 47U 800
www.ilm-saifor.es
ACCESSORIES / Doors and panels28 ARCTIC 3.0
DOUBLE STEEL DOOR
Solid 2-leaf door, especially suitable for narrow aisles. For cabinets with extra privacy or protection requirements. Prepared for installation of the optional IP50 protection kit. Two-point lock. Multiple closing handle options available.
Material: Sheet metalFinish: RAL 7021
+ E.0029410E.0029411
E.0029412E.0029413
E.0029414 E.0029415
DOUBLE STEEL DOOR 24U 600 DOUBLE STEEL DOOR 24U 800
DOUBLE STEEL DOOR 42U 600 DOUBLE STEEL DOOR 42U 800
DOUBLE STEEL DOOR 47U 600DOUBLE STEEL DOOR 47U 800
GLASS DOOR
Glass with IK9 grade heat-treated security glass. Provides cabinet interior visibility. Prepared for installation of the optional IP50 protection kit. One-point lock, upgradable to 4. Multiple closing handle options available.
Material: Sheet metalFinish: RAL 7021
+ E.0029398E.0029399
E.0029400E.0029401
E.0029402E.0029403
GLASS DOOR 24U 600 GLASS DOOR 24U 800
GLASS DOOR 42U 600 GLASS DOOR 42U 800
GLASS DOOR 47U 600 GLASS DOOR 47U 800
LED BELT
Trim with integrated blue LED light. Customizable logo. Replaces standard printed trim. Integrated power supply. Incorporates IEC C14 socket.
Power cable NOT included.
+ E.0029617E.0029618
SFR LOGO LED BELT 600SFR LOGO LED BELT 800
2019
29
ACCESSORIES / Doors and panels
Panels
SIDE PANEL
Protects the cabinet sides. Can be removed for side access to cabinet. Its slam-lock system allows fitting by applying pressure, with no tools required. The lock includes a security key.
Material: Sheet metalFinish: RAL 7021
+ E.0029356E.0029357E.0029358E.0029359
E.0029360E.0029361E.0029362E.0029363
E.0029364E.0029365E.0029366E.0029367
SIDE PANEL 24U 600 SIDE PANEL 24U 800 SIDE PANEL 24U 1000 SIDE PANEL 24U 1200
SIDE PANEL 42U 600 SIDE PANEL 42U 800 SIDE PANEL 42U 1000 SIDE PANEL 42U 1200
SIDE PANEL 47U 600 SIDE PANEL 47U 800 SIDE PANEL 47U 1000 SIDE PANEL 47U 1200
SIDE PANEL WITH CABLE ENTRIES
Protects the cabinet sides. Incorporates 3 cable entry openings of 245cm section each on either side. Especially suited for joining adjacent cabinets, preserving the isolation and privacy between them. Slam lock, with security key.
Material: Sheet metalFinish: RAL 7021
+
INTERNAL MOUNTING KIT
Allows the side panel to be blocked from inside the cabinet. With this kit the side panel can only be opened if accessed from inside the cabinet.
Material: Sheet metalSurface finish: RAL 9005
+
E.0029498E.0029499
E.0029500E.0029501
SIDE PANEL W/CABLE ENTRIES 42U 1000 SIDE PANEL W/CABLE ENTRIES 42U 1200
SIDE PANEL W/CABLE ENTRIES 47U 1000 SIDE PANEL W/CABLE ENTRIES 47U 1200
E.0029513 FASTENING INSIDE KIT FOR SIDE PANEL
2
1
2
Power supply 200-240 VAC / 50Hz
Max. consumption 5W
www.ilm-saifor.es
ACCESSORIES / 19” Mounts30 ARCTIC 3.0
ACCESSORIES19” Mounts
19” Mounts 19” NET Mounts 19” NET 2u Mounts 19” ZAF Mounts 19” ZAF 2u Mounts
Accessories ZAF Adapter NET Adapter Mount support 19" Fastening tool-less mount / cable tray
31313132
32323333
2019
31
ACCESSORIES / 19” Mounts
19” Mounts
19” NET MOUNT
For installing 19” equipment. Specially conceived for effective management of high density cabling requirements. Can be fitted with fingers, rings, protective frames, grommets and cable rollup spools. Possibility of fitting 2 PDUs per mount in 800mm. Continuous depth adjustment.
Material: Sheet metalFinish: RAL 9005U Mark: Laser printed
E.0029419E.0029420E.0029421
E.0029422E.0029423E.0029424
19" NET MOUNTS 600 24U (X2) 19" NET MOUNTS 600 42U (X2) 19" NET MOUNTS 600 47U (X2)
19" NET MOUNTS 800 24U (X2) 19" NET MOUNTS 800 42U (X2) 19" NET MOUNTS 800 47U (X2)
+
19” NET 2U MOUNT
For installing 19” equipment. Allows effective management of high density cabling. Can be fitted with fingers, rings, and cable rollup spools. With an extra 12U for each pair of mounts (8U for the 24U version). Possibility of fitting 2 PDUs per mount. Continuous depth adjustment.
Material: Sheet metalFinish: RAL 9005U Mark: Laser printed
+
19” ZAF MOUNT
For installing 19” equipment. Seals the entire front surface, creating a barrier against air flows. Allows 50 mm continuous depth adjustment retaining the sealing capability. Two 125 cm section cable inlets per 800mm mount. Incorporates side brushes.
Material: Sheet metalFinish: RAL 9005U Mark: Laser printed
+
E.0029431E.0029432E.0029433
19" NET MOUNTS 2UX2 800 24U (X2) 19" NET MOUNTS 2UX3 800 42U (X2) 19" NET MOUNTS 2UX3 800 47U (X2)
E.0029425E.0029426E.0029427
E.0029428E.0029429E.0029430
19" ZAF MOUNTS 600 24U (X2) 19" ZAF MOUNTS 600 42U (X2) 19" ZAF MOUNTS 600 47U (X2)
19" ZAF MOUNTS 800 24U (X2) 19" ZAF MOUNTS 800 42U (X2) 19" ZAF MOUNTS 800 47U (X2)
19” “Optimal front sealing”
ZAF MOUNTS
19” MOUNTS“Maximum cable management”
NET
++
+2
www.ilm-saifor.es
ACCESSORIES / 19” Mounts32 ARCTIC 3.0
19” ZAF 2U MOUNT
For installing 19” equipment. Seals the entire front surface, creating a barrier against air flows. Allows 50 mm continuous depth adjustment while retaining the sealing capability. With an extra 12U for each pair of mounts (8U for the 24U version). The extra units are sealed with blank quick-remove panels. Incorporates side brushes.
Material: Sheet metalFinish: RAL 9005U Mark: Laser printed
ZAF ADAPTER
Adds the air containment capabilities of the ZAF mount to the NET mount without l o s i n g t h e N E T m o u nt ' s ca b l e management performance.
Material: Sheet metalFinish: RAL 9005
+
+
NET ADAPTER
Adds the cable management capabilities of the NET mount to the ZAF mount without losing the ZAF mount's air flow containment performance.
Material: Sheet metalFinish: RAL 9005
++
E.0029690E.0029691E.0029691
19" ZAF MOUNTS 2UX2 800 24U (X2) 19" ZAF MOUNTS 2UX3 800 42U (X2) 19" ZAF MOUNTS 2UX3 800 47U (X2)
E.0029562E.0029563E.0029564
E.0029565E.0029566E.0029567
ZAF COVERS 19" NET MOUNTS 600 24U (KIT) ZAF COVERS 19" NET MOUNTS 600 42U (KIT) ZAF COVERS 19" NET MOUNTS 600 47U (KIT)
ZAF COVERS 19" NET MOUNTS 800 24U (KIT) ZAF COVERS 19" NET MOUNTS 800 42U (KIT) ZAF COVERS 19" NET MOUNTS 800 47U (KIT)
E.0029568E.0029569E.0029570
NET ADAPTER 19" ZAF MOUNTS 800 24U NET ADAPTER 19" ZAF MOUNTS 800 42U NET ADAPTER 19" ZAF MOUNTS 800 47U
2019
33
ACCESSORIES / 19” Mounts
19” MOUNT SUPPORT
Increases the cabinet's load-bearing capacity. Provides additional rigidity and strength to the rack assembly. Incorporates continuous depth adjustment. Includes 2 sliding screws.
Material: Sheet metalFinish: RAL 9005
++
TOOL-LESS KIT FOR 19” MOUNT / CABLE TRAY
This kit allows adjustment of the mount and cable tray positions without using tools. The kit includes two fixing nuts with ergonomic wings.
Material: Sheet metalFinish: RAL 9005
++
E.0029440E.0029441E.0029442E.0029443
19” MOUNT SUPPORT 600 19” MOUNT SUPPORT 800 19” MOUNT SUPPORT 1000 19” MOUNT SUPPORT 1200
E.0029588 TOOL-LESS KIT FOR 19” MOUNT / TRAY
www.ilm-saifor.es
ACCESSORIES / Covers and shelves34 ARCTIC 3.0
ACCESSORIESCovers and shelves
Covers Steel cover Brush cover Cabling cover Vented door Fan unit
Shelves Fix shelf Sliding shelf Front shelf 19” shelf cable winding
3535353536
36363637
2019
35
ACCESSORIES / Covers and shelves
Covers
STEEL COVER
Covers the cabinet top or bottom with an airtight fit. Protects the cabinet from dust or foreign objects and prevents air recirculation in thermal containment configurations.
Material: Sheet metalFinish: RAL 7021
+
BRUSH COVER
Covers the cabinet top or bottom while still allowing cable entry into the cabinet. Cable entry is maximized, spanning the entire rack sides.
Material: Sheet metalFinish: RAL 7021
+
CABLING COVER
Cable inlets are rounded, with a minimum bending curve to protect the cable as it enters the cabinet. Covers the cabinet top or bottom while still allowing cable entry into the cabinet. Cable entry is maximized, spanning the entire rack sides.
Material: Sheet metalFinish: RAL 7021
+
E.0029450E.0029451E.0029452E.0029453
E.0029454E.0029455E.0029456E.0029457
STEEL COVER 600X600 STEEL COVER 600X800 STEEL COVER 600X1000 STEEL COVER 600X1200
STEEL COVER 800X600 STEEL COVER 800X800 STEEL COVER 800X1000 STEEL COVER 800X1200
E.0029474E.0029475E.0029476E.0029477
E.0029478E.0029479E.0029480E.0029481
CABLING COVER 600X600 CABLING COVER 600X800 CABLING COVER 600X1000 CABLING COVER 600X1200
CABLING COVER 800X600 CABLING COVER 800X800 CABLING COVER 800X1000 CABLING COVER 800X1200
E.0029458E.0029459E.0029460E.0029461
E.0029462E.0029463E.0029464E.0029465
BRUSH COVER 600X600 BRUSH COVER 600X800 BRUSH COVER 600X1000 BRUSH COVER 600X1200
BRUSH COVER 800X600 BRUSH COVER 800X800 BRUSH COVER 800X1000 BRUSH COVER 800X1200
VENTED COVER
Covers the cabinet top, protecting the cabinet interior. Its large perforated area allows natural ventilation by convection. IP120 Grade.
Material: Sheet metalFinish: RAL 7021
++ E.0029466E.0029467E.0029468E.0029469
E.0029470E.0029471E.0029472E.0029473
VENTED COVER 600X600 VENTED COVER 600X800 VENTED COVER 600X1000 VENTED COVER 600X1200
VENTED COVER 800X600 VENTED COVER 800X800 VENTED COVER 800X1000 VENTED COVER 800X1200
www.ilm-saifor.es
ACCESSORIES / Covers and shelves36 ARCTIC 3.0
FAN UNIT
For hot air extraction. Automatic start and stop driven by a digital electronic thermostat allowing the desired temperature to be set. The fans are low-noise. Fitted with IEC C14 socket. Power cable NOT included.
Material: Sheet metalFinish: RAL 7021
+
FIX SHELF
For supporting non-rackable devices or equipment. 50 kg load-bearing capacity. Quick installation without any tools required. Fits onto 19” mounts.
Material: Sheet metalFinish: RAL 9005
++
Shelves
E.0029514E.0029515E.0029516E.0029517
E.0029520E.0029521E.0029522E.0029523
E.0029518E.0029519
E.0029524E.0029525
FAN UNIT 4V 600 F600 FAN UNIT 4V 600 F800 FAN UNIT 4V 600 F1000 FAN UNIT 4V 600 F1200
FAN UNIT 4V 800 F600 FAN UNIT 4V 800 F800 FAN UNIT 4V 800 F1000 FAN UNIT 4V 800 F1200
FAN UNIT 6V 600 F1000 FAN UNIT 6V 600 F1000
FAN UNIT 6V 800 F1000 FAN UNIT 6V 800 F1000
4 FANS
6 FANS
E.0029575E.0029576E.0029577E.0029578
FIX SHELF 50 KG 600 FIX SHELF 50 KG 800 FIX SHELF 50 KG 1000 FIX SHELF 50 KG 1200
2019
37
ACCESSORIES / Covers and shelves
SLIDING SHELF
Shelve for supporting non-rackable devices or equipment, with telescopic guides allowing full extraction. 50 kg load-bearing capacity. Quick installation without any tools required.
Material: Sheet metalFinish: RAL 9005
++
FRONT SHELF
D e s i g n e d fo r s u p p o r t i n g l i g ht equipment, with a 20Kg load-bearing capacity. Fits onto 19” mounts. Takes up 2U height. Includes screws for fitting to 19” mounts.
Material: Sheet metalFinish: RAL 9005
++
19” ROLLUP SHELF
Shelf designed for rolling up any extra cable after the installation, mainly fiber optic cable. Features four round plastic spools. Extendable shelve for easier handling. Rounded edges to avoid damage to cables.
Material: Sheet metalFinish: RAL 9005
+
E.0029571E.0029572E.0029573E.0029574
SLIDING SHELF 50 KG 600 SLIDING SHELF 50 KG 800 SLIDING SHELF 50 KG 1000 SLIDING SHELF 50 KG 1200
E.0011401E.0011400E.0011402E.0011403
FRONT SHELF 250 MM FRONT SHELF 350 MM FRONT SHELF 450 MM FRONT SHELF 500 MM
E.0028220E.0028221
19" ROLLUP SHELF 2U 19" ROLLUP SHELF 3U
Type Air Flow Power input Service life
4 fans 640 m3/h 79 W 37500 h (40ºC)
6 fans 960 m3/h 117 W 37500 h (40ºC)
www.ilm-saifor.es
ACCESSORIESCable management
ACCESSORIES / Cable management38 ARCTIC 3.0
2019 ACCESSORIES / Cable management
39
Organizer Panels 19” Cable entry panel with brush insert 19” Panel with rings 19” Organizer panel with cover 19” Organizer with rings 19” Organizer with fingers
Vertical cable guide tray Vertical cable guide tray
Accessories Spool kit Clamp ring kit Ring kit Channel window frames Cable management kits Fabric cable tie
4040404141
41
424242424343
19” CABLE ENTRY PANEL WITH BRUSH INSERT
++
CABLING COVER(See cover and shelve section)
++
++ VERTICAL CABLE GUIDE TRAY
CABLE MANAGEMENT ACCESSORIES - Fingers - Cable protection frame - Rings - Fabric cable tie - Spools
+
19” SHELF CABLE WINDING
(See cover and shelve section)
++
19” PANEL WITH RINGS ++
19” ORGANIZER PANEL WITH COVER
++
19” ORGANIZER WITH RINGS
++
19” ORGANIZERWITH FINGERS
++
++ 19” NET MOUNTS(See mounts section)
www.ilm-saifor.es
ACCESSORIESCable management
ACCESSORIES / Cable management40 ARCTIC 3.0
Organizer Panels
19” CABLE ENTRY PANEL WITH BRUSH INSERT
19” 1U panel for cable entry into the cabinet. The rectangular opening on its front is covered with a brush insert preventing its passage of air. Rubber covered edges to prevent cable breaking. Cable entry section of 86 cm.
Material: Sheet metalFinish: RAL 9005
+
19” PANEL WITH RINGS
19” panel with 5 rings for horizontal cable organization on the rack front. Available in 1U or 2U height.
Material: Sheet metalFinish: RAL 9005
+
19” ORGANIZER PANEL WITH COVER
19” panel for horizontal cable organization with removable front cover. Conceals the cables, for a cleaner appearance and provides a further level of protection to the cables.
Material: Sheet metalFinish: RAL 9005
+
E.0011378 19" CABLE ENTRY PANEL WITH BRUSH INSTERT
E.0011379 E.0016014
19" PANEL WITH 1U 19" PANEL WITH 5 RINGS 2U
5 RINGS
E.0011380 E.0011381
19" PANEL 1U WITH COVER 19" PANEL 2U WITH COVER
2019
41
ACCESSORIES / Cable management
19”
1U or 2U height 19” panel with 4 clip-type rings made of thermoplastic material. For horizontal cable organization. Available in 1-side or 2-side version.
Material: Sheet metal / ThermoplasticFinish: RAL 9005 / Black
ORGANIZER WITH RINGS+
19” FINGERS
1U, 2U or 3U height 19” panel with organizer fingers. For horizontal and vertical cable organization. With removable swivel door. Particularly suitable for combining with patching panels. Available in 1-side or 2-side version.
Material: Sheet metal / ThermoplasticFinish: RAL 9005 / Black
ORGANIZER WITH+
1 SIDEE.0028194 E.0028195
E.0028196 E.0028197
E.0028198 E.0028199 E.0028200
E.0028201 E.0028202 E.0028203
19” ORG. RINGS 1 SIDE 1U 65 19” ORG. RINGS 1 SIDE 1U 130
19” ORG. RINGS 1 SIDE 2U 65 19” ORG. RINGS 1 SIDE 2U 120
19” ORG. RINGS 2 SIDES 1U 65 65 19” ORG. RINGS 2 SIDES 1U 65 130 19” ORG. RINGS 2 SIDES 1U 130 130
19” ORG. RINGS 2 SIDES 2U 65 65 19” ORG. RINGS 2 SIDES 2U 65 120 ORG. ANILLAS 2 CARAS 2U 120 120
2 SIDES
1 SIDEE.0028204 E.0028205 E.0028206
E.0028207 E.0028208 E.0028209
E.0028210 E.0028211 E.0028212
E.0028213 E.0028214 E.0028215
19” ORG. FINGERS 1 SIDE F100 1U 19” ORG. FINGERS 1 SIDE F100 2U 19” ORG. FINGERS 1 SIDE F100 3U
19” ORG. FINGERS 1 SIDE F170 1U 19” ORG. FINGERS 1 SIDE F170 2U 19” ORG. FINGERS 1 SIDE F170 3U
19” ORG. FINGERS 2 SIDES F100 1U 19” ORG. FINGERS 2 SIDES F100 2U 19” ORG. FINGERS 2 SIDES F100 3U
19” ORG. FINGERS 2 SIDES F170 1U 19” ORG. FINGERS 2 SIDES F170 2U 19” ORG. FINGERS 2 SIDES F170 3U
2 SIDES
Cable tray for vertical organization of the main cabling entering from the top or bottom and being guided at the sides of the rack. Highly versatile thanks to its wide range of optional cable management accessories, including fingers, rings, rollup spools and protective frames for cable entry. Also suitable for installing PDUs.
Material: Sheet metalFinish: RAL 9005
VERTICAL CABLE TRAY++
Vertical cable guide tray
E.0029444 E.0029445 E.0029446
E.0029447 E.0029448 E.0029449
VERTICAL CABLE TRAY 125 24U VERTICAL CABLE TRAY 125 42U VERTICAL CABLE TRAY 125 47U
VERTICAL CABLE TRAY 250 24U VERTICAL CABLE TRAY 250 42U VERTICAL CABLE TRAY 250 47U
2
Height Section 1u 20,25 cm2 2u 40,50 cm2
www.ilm-saifor.es
ACCESSORIES / Cable management42 ARCTIC 3.0
FRAMES
Frame made of thermoplastic material with rounded edges. Protects cable hoses from potential cuts against steel parts. 74.95 cm cable entry section. Kit for 5 cable inlets.
Material: PolyamideFinish: RAL 7035
CHANNEL WINDOW+
Accessories
Suitable for rolling up cable overlengths. With a 50mm diameter, it ensures a proper bend radius.
Material: ThermoplasticFinish: Black
SPOOL KIT+
E.0012395 CHANNEL WINDOW 150X45MM (10 PCS)
Set of 4 clamp rings with safety hook. Can be quickly fitted with no tools required, in a vertical or a horizontal position. A radius clip can be fitted as an option to support cables. Each ring has a cable entry section of 41.17cm.
Material: PolyamideFinish: Black
CLAMP RING KIT+
RING KIT
Set of 4 rings. Available in four different sizes. Allows guiding and bundling of cables in a convenient and safe manner. Includes fixing screws.
Material: ThermoplasticFinish: Black
+ E.0028224 E.0028225 E.0028226 E.0028227
KIT 4 RINGS 1U 65 KIT 4 RINGS 1U 130 KIT 4 RINGS 2U 65 KIT 4 RINGS 2U 120
E.0028237 E.0028238
KIT 10 CLAMP RINGS KIT 10 RADIUS CLIP CLAMP RING
E.0029602 KIT 4 SPOOLS D50 150 SHORT FOOT
Consisting of a set of accessories mounted on the 19” mounts for rack cable management and organization. These accessories can be mounted in different positions to accommodate all the real cabling situations in a datacenter.
CABLE MANAGEMENT KITS+
2019
43
ACCESSORIES / Cable management
For non-aggressive tying of copper and optic fiber cables. Can be reused. Available in 20 piece kits or in 5 or 25m rolls.
Material: Polyamide / PolypropyleneFinish: According to color
FABRIC CABLE TIE+
E.0029811 E.0029812 E.0029813
E.0029793 E.0029794 E.0029795
E.0029796 E.0029797 E.0029798
E.0029799 E.0029800 E.0029801
E.0029802 E.0029803 E.0029804
E.0029805 E.0029806 E.0029807
E.0029808 E.0029809 E.0029810
KIT 600 FINGERS 24U KIT 600 FINGERS 42U KIT 600 FINGERS 47U
KIT 800 FINGERS 24U KIT 800 FINGERS 42U KIT 800 FINGERS 47U
KIT 800 FINGERS+RINGS 24U KIT 800 FINGERS+RINGS 42U KIT 800 FINGERS+RINGS 47U
KIT 800 FINGERS+RINGS+FRAMES 24U KIT 800 FINGERS+RINGS+FRAMES 42U KIT 800 FINGERS+RINGS+FRAMES 47U
KIT 800 FINGERS+FRAMES 24U KIT 800 FINGERS+FRAMES 42U KIT 800 FINGERS+FRAMES 47U
KIT 800 FINGERS+CLAMP RINGS 24U KIT 800 FINGERS+CLAMP RINGS 42U KIT 800 FINGERS+CLAMP RINGS 47U
KIT 800 FINGERS+CLAMP RINGS+FRAMES 24U KIT 800 FINGERS+CLAMP RINGS+FRAMES 42U KIT 800 FINGERS+CLAMP RINGS+FRAMES 47U
E.0028229E.0028230E.0028231E.0028232E.0028743E.0028599E.0028600E.0028744
E.0028745E.0028746
TEXTILE STRIP KIT (X20) D45 L150 BLACKTEXTILE STRIP KIT (X20) D60 L200 BLACKTEXTILE STRIP KIT (X20) D60 L200 YELLOWTEXTILE STRIP KIT (X20) D60 L200 BLUETEXTILE STRIP KIT (X20) D60 L200 GREENTEXTILE STRIP KIT (X20) D60 L200 WHITETEXTILE STRIP KIT (X20) D60 L200 REDTEXTILE STRIP KIT (X20) D100 L330 BLACK
TEXTILE STRIP COIL 5M BLACKTEXTILE STRIP COIL 25M BLACK
FINGERS
FINGERS + RINGS
FINGERS + RINGS + FRAMES
FINGERS + FRAMES
FINGERS + CLAMP RINGS
FINGERS + CLAMP RINGS + FRAMES
PIECE KITS
ROLLS
( )FINGERS
( )RINGS
( )FRAMES
( )CLAMP RING
2
2
Number of cable entries according to mount 19 "800
Height Entries per 19” Mount
24u 2 42u 5 47u 5
2
www.ilm-saifor.es
44 ARCTIC 3.0 ACCESSORIES / PDU supports and power cables
ACCESSORIESPDU supports and power cables
PDU supports Vertical PDU support cable tray Double universal PDU mounting bracket PDU column mounting bracket kit
Power cables IEC C13 - IEC C14 cable IEC C13 - Schuko-M Type F cable IEC C13 - UK-M Type G cable Cable IEC C13 - NEMA 5-15P
4545
45
46464646
2019
45
ACCESSORIES / PDU supports and power cables
PDU supports
SUPPORT CABLE TRAY
Vertical cable tray for mounting up to 2 PDUs. Compact sized to minimize the space taken up by the PDUs inside the cabinet. Designed for mounting in the rear of the cabinet. Features holes for fitting rings, spools, cable ties. Also suitable as a low or medium density cable tray. Can be fitted with the double universal PDU mounting bracket (not included).
Material: Sheet metalFinish: RAL 9005
VERTICAL PDU+
IT PDU BRACKET UNIVERSAL
Fits onto the vertical PDU support cable tray, making the vertical cable tray compatible with most PDU brands on the market. Accommodates up to 2 PDUs. The kit consists of two pieces.
Material: Sheet metalFinish: RAL 9005
K+
IT PDU BRACKET TO COLUMN
PDU mounting bracket fitted straight onto the column. Accommodates up to 2 PDUs. Features universal adjustment, making it compatible with most PDU brands on the market. Kit consisting of two pieces.
Material: Sheet metalFinish: RAL 9005
K+
E.0029622 E.0029623 E.0029624
VERTICAL CABLE TRAY PDU SUPPORT 24U VERTICAL CABLE TRAY PDU SUPPORT 42U VERTICAL CABLE TRAY PDU SUPPORT 47U
E.0029512 KIT PDU BRACKET UNIVERSAL (X2 PDU)
E.0029600 E.0029601
KIT PDU BRACKET TO COLUMN (X1 PDU) KIT PDU BRACKET TO COLUMN (X2 PDU)
www.ilm-saifor.es
2019
47
ACCESSORIES / PDU supports and power cables
ACCESSORIES / PDU supports and power cables46 ARCTIC 3.0
Power cables
E.0029992 E.0029993E.0029994 E.0029995 E.0029996
E.0029997 E.0029998E.0029999 E.0030000 E.0030001
E.0030002 E.0030003E.0030004 E.0030005 E.0030006
E.0030007 E.0030008E.0030009 E.0030010 E.0030011
IEC-C13 NEMA-5-15P SVT 18/3AWG 10A 0.5M IEC-C13 NEMA-5-15P SVT 18/3AWG 10A 1M IEC-C13 NEMA-5-15P SVT 18/3AWG 10A 2M IEC-C13 NEMA-5-15P SVT 18/3AWG 10A 3M IEC-C13 NEMA-5-15P SVT 18/3AWG 10A 5M
IEC-C13 NEMA-5-15P SJT 18/3AWG 10A 0.5M IEC-C13 NEMA-5-15P SJT 18/3AWG 10A 1M IEC-C13 NEMA-5-15P SJT 18/3AWG 10A 2M IEC-C13 NEMA-5-15P SJT 18/3AWG 10A 3M IEC-C13 NEMA-5-15P SJT 18/3AWG 10A 5M
IEC-C13 NEMA-5-15P SJT 16/3AWG 13A 0.5M IEC-C13 NEMA-5-15P SJT 16/3AWG 13A 1M IEC-C13 NEMA-5-15P SJT 16/3AWG 13A 2M IEC-C13 NEMA-5-15P SJT 16/3AWG 13A 3M IEC-C13 NEMA-5-15P SJT 16/3AWG 13A 5M
IEC-C13 NEMA-5-15P SJT 14/3AWG 15A 0.5M IEC-C13 NEMA-5-15P SJT 14/3AWG 15A 1M IEC-C13 NEMA-5-15P SJT 14/3AWG 15A 2M IEC-C13 NEMA-5-15P SJT 14/3AWG 15A 3M IEC-C13 NEMA-5-15P SJT 14/3AWG 15A 5M
E.0029972 E.0029973E.0029974 E.0029975 E.0029976
E.0029977 E.0029978E.0029979 E.0029980 E.0029981
IEC-C13 SCHUKO-M 0.75MM2 6A 0.5M IEC-C13 SCHUKO-M 0.75MM2 6A 1M IEC-C13 SCHUKO-M 0.75MM2 6A 2M IEC-C13 SCHUKO-M 0.75MM2 6A 3M IEC-C13 SCHUKO-M 0.75MM2 6A 5M
IEC-C13 SCHUKO-M 1MM2 10A 0.5M IEC-C13 SCHUKO-M 1MM2 10A 1M IEC-C13 SCHUKO-M 1MM2 10A 2M IEC-C13 SCHUKO-M 1MM2 10A 3M IEC-C13 SCHUKO-M 1MM2 10A 5M
E.0029982 E.0029983E.0029984 E.0029985 E.0029986
E.0029987 E.0029988E.0029989 E.0029990 E.0029991
IEC-C13 UK-M 0.75MM2 6A 0.5M IEC-C13 UK-M 0.75MM2 6A 1M IEC-C13 UK-M 0.75MM2 6A 2M IEC-C13 UK-M 0.75MM2 6A 3M IEC-C13 UK-M 0.75MM2 6A 5M
IEC-C13 UK-M 1MM2 10A 0.5M IEC-C13 UK-M 1MM2 10A 1M IEC-C13 UK-M 1MM2 10A 2M IEC-C13 UK-M 1MM2 10A 3M IEC-C13 UK-M 1MM2 10A 5M
C13 C14
Connectors: IEC-C13 / IEC-C14Cable sections: 0.75mm / 1mm Max. Intensity: 6A / 10ALength: 0.5m / 1m / 2m / 3m / 5mCable colour: black
C13 TYPE F
Connectors: IEC-C13 / SCHUKO male type FCable sections: 0.75mm / 1mm Max. Intensity: 6A / 10ALength: 0.5m / 1m / 2m / 3m / 5mCable colour: black
2 2
2 2
C13 TYPE G
Connectors: IEC-C13 / UK male type GCable sections: 0.75mm / 1mmMax. Intensity: 6A / 10ALength: 0.5m / 1m / 2m / 3m / 5mCable colour: black
2 2
C13 NEMA 5-15P
Connectors: IEC-C13 / NEMA 5-15PSections: 18/3AWG 16/3AWG 14/3AWGMax. Intensity: 10A / 13A / 15ALength: 0.5m / 1m / 2m / 3m / 5mCable colour: blackCover type: SVT / SJT
IEC C13 / SCHUKO-M TYPE F CABLE +
IEC C13 / UK-M TYPE G CABLE +
IEC C13 / NEMA 5-15P CABLE +
E.0029962 E.0029963 E.0029964 E.0029965 E.0029966
E.0029967 E.0029968E.0029969 E.0029970 E.0029971
IEC-C13 IEC-C14 0.75MM2 6A 0.5M IEC-C13 IEC-C14 0.75MM2 6A 1M IEC-C13 IEC-C14 0.75MM2 6A 2M IEC-C13 IEC-C14 0.75MM2 6A 3M IEC-C13 IEC-C14 0.75MM2 6A 5M
IEC-C13 IEC-C14 1MM2 10A 0.5M IEC-C13 IEC-C14 1MM2 10A 1M IEC-C13 IEC-C14 1MM2 10A 2M IEC-C13 IEC-C14 1MM2 10A 3M IEC-C13 IEC-C14 1MM2 10A 5M
www.ilm-saifor.es
ACCESSORIES / Air Flow Management48 ARCTIC 3.0
ACCESSORIESAir Flow Management
Quick-fit blank panel
Aisle bottom covers
49
49
2019
49
ACCESSORIES / Air Flow Management
Quick-fit blank panel
Panels are used to cover up the 19” spaces of the cabinet front not taken up by equipment. Essential to ensure a i r c o n t a i n m e n t a n d a v o i d recirculation inside the cabinet and optimize cooling. Swift installation requiring no tools, thanks to its quick clip system.
Material: ABS plasticFinish: RAL 9005
Bottom covers are required in aisle rack configurations to cover the empty spaces between the floor and the rack. They contain the air within the aisle in CUBO type installations.
Material: Sheet metalFinish: RAL 7021
Aisle bottom covers
E.0017492E.0017493E.0017494E.0017495
BLANKING PANEL 1U 19" QUICK FIT ABS (X15)BLANKING PANEL 1U 19" QUICK FIT ABS (X150)BLANKING PANEL 3U 19" QUICK FIT ABS (X5)BLANKING PANEL 3U 19" QUICK FIT ABS (X50)
E.0029556E.0029557
E.0029558E.0029559E.0029560E.0029561
E.0030144E.0030145
E.0030146E.0030147E.0030148E.0030149
BOTTOM FRAME FRONT COVER 600BOTTOM FRAME FRONT COVER 800
BOTTOM FRAME LATERAL COVER 600BOTTOM FRAME LATERAL COVER 800BOTTOM FRAME LATERAL COVER 1000BOTTOM FRAME LATERAL COVER 1200
BOTTOM FRAME CASTORS FRONT COVER 600BOTTOM FRAME CASTORS FRONT COVER 800
BOTTOM FRAME CASTORS LAT. COVER 600BOTTOM FRAME CASTORS LAT. COVER 800BOTTOM FRAME CASTORS LAT. COVER 1000BOTTOM FRAME CASTORS LAT. COVER 1200
RACK COVERS WITH FEET
RACK COVERS WITH WHEELS
www.ilm-saifor.es
ACCESSORIES / Security and Control50 ARCTIC 3.0
ACCESSORIESSecurity and Control
Acces security Door handle with key Door handle with mechanical combination + key Pushbutton door handle Electric door handle Door detector
Electric security ESD wrist strap Grounding Bar Ground connection
Control ARC-GUARD
5151
515152
525252
53
2019
51
ACCESSORIES / Security and Control
DOOR HANDLE WITH KEY
Security handle with key cylinder. Master key locks available upon request.
Material: Polyamide Finish: Black
+
Access security
E.0029626E.0029627E.0029628
E.0029629E.0029630E.0029631
HANDLE KEY EK333 SD 2P 24UHANDLE KEY EK333 SD 4P 42UHANDLE KEY EK333 SD 4P 47U
HANDLE KEY EK333 DD 2P 24UHANDLE KEY EK333 DD 2P 42UHANDLE KEY EK333 DD 2P 47U
E.0029646E.0029647E.0029648E.0029649
E.0029650E.0029651E.0029652
HANDLE MEC. COMB + KEY SD 1PHANDLE MEC. COMB + KEY SD 2P 24UHANDLE MEC. COMB + KEY SD 4P 42UHANDLE MEC. COMB + KEY SD 4P 47U
HANDLE MEC. COMB + KEY DD 2P 24UHANDLE MEC. COMB + KEY DD 2P 42UHANDLE MEC. COMB + KEY DD 2P 47U
E.0029632E.0029633E.0029634E.0029635
E.0029636E.0029637E.0029638
HANDLE PUSH BUTTON SD 1PHANDLE PUSH BUTTON SD 2P 24UHANDLE PUSH BUTTON SD 4P 42UHANDLE PUSH BUTTON SD 4P 47U
HANDLE PUSH BUTTON DD 2P 24UHANDLE PUSH BUTTON DD 2P 42UHANDLE PUSH BUTTON DD 2P 47U
E.0029639E.0029640E.0029641E.0029642
E.0029643E.0029643E.0029643
HANDLE ELECTRIC SD 1PHANDLE ELECTRIC SD 2P 24UHANDLE ELECTRIC SD 4P 42UHANDLE ELECTRIC SD 4P 47U
HANDLE ELECTRIC DD 2P 24UHANDLE ELECTRIC DD 2P 42UHANDLE ELECTRIC DD 2P 47U
DOOR HANDLE WITH MECHANICAL COMBINATION + KEY
Security handle with 3-digit mechanical combination cylinder. For dual security, also available in mechanical combination + key cylinder version.
Material: Polyamide Finish: Black
PUSHBUTTON DOOR HANDLE
Simple pushbutton actuated handle. Suitable for cabinets nor requiring any access security.
Material: Polyamide Finish: Black
ELECTRIC DOOR HANDLE
Security handle with electric lock cylinder. Opened by 24VDC impulse (12VDC available upon request). Handle status indicated by LED and reed contact. Backup key in case of system failure.
Material: Polyamide Finish: Black
+
+
+
SIMPLE DOOR
DOUBLE DOOR
SIMPLE DOOR
DOUBLE DOOR
SIMPLE DOOR
DOUBLE DOOR
SIMPLE DOOR
DOUBLE DOOR
www.ilm-saifor.es
ACCESSORIES / Security and Control52 ARCTIC 3.0
Wrist strap and quick connector assembly, required to ensure the controlled discharge of the electrostatic charge generated by human contact. Comfortable and ergonomic wrist strap with 2m flexible cable. Complies with EN 61340-5-1/-2.
Material: stainless steel / polyurethaneFinish: Black / Yellow
ESD WRIST STRAP+
GROUNDING BAR
Vertical bar with multiple connection points required for equipment grounding. Installed with polyester resin and fiberglass spacers, which provide insulation between the ground and the cabinet. Copper bar with 20x5 mm section.
Material: copper / polyesterFinish: raw / red
+
GROUND CONNECTION
For grounding the cabinet. M8x20 ground bolt.
Material: steel / copperFinish: Zinc plated
+
Electric security
E.0029589
E.0029590
ANTISTATIC EARTH ESD
ANTISTATIC WRISTBAND ESD
E.0029591 E.0029592 E.0029593
GROUNDING BAR 24U GROUNDING BAR 42U GROUNDING BAR 47U
E.0008445 EARTH CONNECTION KIT M8
2019
53
ACCESSORIES / Security and Control
ARC-GUARD
ARC-GUARD is a with and options. Designed to meet the management and control needs of centralized and decentralized structure datacenters, individual racks and Co-location centers.
versatile and easily scalable security and control system integrated RFID technology IP communication
+
Control DOOR DETECTOR
Magnetic switch that fits on the cabinet door to indicate the door status (open/closed). NA and NC contacts, can be connected to the security system. Compatible with the LED lighting module. Power cable NOT included.
+ E.0029596 KIT OPEN DOOR DETECTOR
Maximum Voltage 250 Vac / 60 Vdc
Maximum Current 5A
Material ABS Plastic
With electromechanical handles , or for integration of new access control systems with and HID cards. Featuring RFID technology integrated in the handles and Ethernet communication, it allows remote
management and monitoring of any access handle, driven by its centralized software running on a server. Also equipped with an busbar that can be integrated into an Ethernet network by means of a gateway, it facilitates in centralized
facilities.
Disabling of lost access cards within seconds, access activity reports for each rack, remote door opening by rack, by group or by zone, real-time, by means of 2 , system alerts, automatic , etc. These are some of the many
benefits provided by the ARC-GUARD system.
easily integrated into existing management systems centralized software
RS-485 communication cost optimization
monitoring dual verification HID proximity cards alert emails
www.ilm-saifor.es
ACCESSORIES / Installation and Maintenance54 ARCTIC 3.0
ACCESSORIESInstallation and Maintenance
Mounting LED lighting Fixing kits Baying kit
Unpacking and transport Pallet with built-in ramp Ramp Transport casters
Other accessories Chassis support kit Plinth
555555
565656
5757
Mounting
2019
55
ACCESSORIES / Installation and Maintenance
LED LIGHTING
Compact light module for cabinet interior lighting. Available in cold white and blue (please enquire for other colors). Can be installed on the top switchboard or on a 19” unit. Positions include on, off and connection to open door detector (auto). IEC C14 connection socket. Power cable NOT included.
+
FIXING KITS
Set of M6 nuts and bolts for fixing equipment on 19” mount square holes. Consists of M6 nuts, inserted from front with no tools required, M6 bolts and trim washers.
The tool-less version consists of a special bolt that can be installed and removed without tools.
+
BAYING KIT
For joining cabinets in a row. The joining is performed on the front, not requiring door removal. Fitting nuts and bolts included.
+
E.0029594E.0029595
MODULE 19" 1U LIGHT LED COOL WHITEMODULE 19" 1U LIGHT LED BLUE
E.0016704E.0016705E.0016706
ASSEMBLY GROUP SQUARE HOLE 9,5 (X25)ASSEMBLY GROUP SQUARE HOLE 9,5 (X50)ASSEMBLY GROUP SQUARE HOLE 9,5 (X100)
E.0029510 BAYING KIT
Power supply 90-264Vac / 47-63Hz
Max. consumption 8W
Nominal voltage 12V
Material Steel / methacrylate
Finish RAL 7021
ASSEMBLY GROUP SQUARE HOLE 9,5 (X25)ASSEMBLY GROUP SQUARE HOLE 9,5 (X50)ASSEMBLY GROUP SQUARE HOLE 9,5 (X100)
E.0029597E.0029598E.0029599
TOOL-LESS FIXING KITS
The tool-less version consists of a special bolt that can be installed and removed without tools. Tool-less fixing kits to use for hold clamp rings.
+
www.ilm-saifor.es
RAMP
Plywood ramp for easier lowering of cabinet from the pallet to the floor. Fitted with wheels and gripping handles for greater convenience, allowing the ramp to be moved easily around the unloading area.
Material: pine plywoodFinish: raw
+
PALLET WITH BUILT-IN RAMP
Wooden pallet with hinged ramp, for easier lowering of the cabinet from the pallet to the floor.
Material: PinewoodFinish: raw
+
ACCESSORIES / Installation and Maintenance56 ARCTIC 3.0
Unpacking and transport
TRANSPORT CASTERS
Wheels that can be fitted to the cabinet for easier transport and relocation of the cabinet in the datacenter. It is recommended to combine this accessory with the pallet with built-in ramp or with the moveable ramp for unloading and carrying the cabinet from the unloading bay to its final location. Total load-bearing capacity 320kg.
Material: Steel / PolyamideFinish: RAL 7021 / black
+ E.0029580E.0029581
CASTORS KIT WIDTH 600CASTORS KIT WIDTH 600
E.0029582 KIT HINGED RAMP FOR STANDARD PALLET
E.0029607 MOVIL RAMP FOR PALLET
2019
57
ACCESSORIES / Installation and Maintenance
Others accessories
PLINTH
Raises the rack structure by 90mm. Allows cable entry through the bottom of the rack when there is no raised access flooring. Includes pre-punched removable side covers allowing cable entry from the front or rear. Optionallly ARCTIC feet can be fixed.
Material: Sheet metalFinish: RAL 7021
+
CHASIS SUPPORT KIT
Fitted onto the sides of the 19” mount, it serves the purpose of providing support to heavy equipment and adding rigidity to long equipment.
Material: Sheet metalFinish: RAL 9005
+
E.0029526 E.0029527 E.0029528 E.0029529
E.0029530 E.0029531 E.0029532 E.0029533
PLINTH 90MM 600X600 PLINTH 90MM 600X800 PLINTH 90MM 600X1000 PLINTH 90MM 600X1200
PLINTH 90MM 800X600 PLINTH 90MM 800X800 PLINTH 90MM 800X1000 PLINTH 90MM 800X1200
E.0029579 KIT CHASSIS SUPPORT GUIDES SIDE 40MM
www.ilm-saifor.es
DIMENSIONS58 ARCTIC 3.0
DIMENSIONSGeneral
ASP
NET
ISP
RACK
RACK
RACK
59
60
61
2019
59
DIMENSIONES
Height(U)
Width(mm)
Depth(mm)
Height(mm)
Depth (mm)d1
d2
d3
h1 h2 h3
SIMPLEFront door
SIMPLEFront door BASIC
VersionPREMIUM
VersionDOUBLERear door
SIMPLERear door
42U 600
1000
2037.5 2000 1900
1036.7 1050.9 961 836 8201200 1236.7 1250.9 1161 1036 1020
8001000 1036.7 1050.9 961 836 820 1200 1236.7 1250.9 1161 1036 1020
47U 600
1000
2237.5 2200 2100
1036.7 1050.9 961 836 820 1200 1236.7 1250.9 1161 1036 1020
800 1000 1036.7 1050.9 961 836 820 1200 1236.7 1250.9 1161 1036 1020
SIDE VIEWA
A
h3
d1
d2
PREMIUMversion
REAR VIEW Cableentrydetail
DOUBLErear door
ASPFRONT VIEW
h2h1
37.5
d3
TOP VIEW
d2
98
Dimensions in mm.
Cable entries details
PREMIUM Version
R25 R25
98 59
BASIC Version
98 52
www.ilm-saifor.es
DIMENSIONS60 ARCTIC 3.0 61
DIMENSIONS2019
NETFRONT VIEW
Cable entries details
PREMIUM version
R25 R25
98 59
BASIC version
98 52
h2h1
37.5
d3
TOP VIEW
d2
98
FRONT VIEW Cableentrydetail
DOUBLErear door
SIDE VIEW
h3
d1
d2
A
A
PREMIUMversion
t
Heigh (U)
Width(mm)
Depth(mm)
Height(mm)
Depth (mm)d1
d2
d3
h1 h2 h3
SIMPLEFront door
SIMPLEFront door BASIC
VersionPREMIUM
VersionDOUBLERear door
SIMPLERear door
42U
600 800
2037.5 2000 1900
836.7 850.9 761 636 620 1000 1036.7 1050.9 961 836 820 1200 1236.7 1250.9 1161 1036 1020
800 800 836.7 850.9 761 636 620
1000 1036.7 1050.9 961 836 820 1200 1236.7 1250.9 1161 1036 1020
47U
600 800
2237.5 2200 2100
836.7 850.9 761 636 620 1000 1036.7 1050.9 961 836 820 1200 1236.7 1250.9 1161 1036 1020
800 800 836.7 850.9 761 636 620
1000 1036.7 1050.9 961 836 820 1200 1236.7 1250.9 1161 1036 1020
ISP
Dimensions in mm.
Compar ments Height Height (mm) Depth (mm)Height
(U)2P 3P 4P
Width(mm)
Depth(mm)
h1 h2 h3 d1 d2
1000 1050.9 961600
1200 1250.9 1161 1000 1050.9 961
42U 21U 13U 9U 800
1200
2037.5 2000 1900
1250.9 1161 1000 1050.9 961
600 1200 1250.9 1161 1000 1050.9 961
47U 23U 14U 10U800
1200
2237.5 2200 2100
1250.9 1161
d3
TOP VIEW
d2
98
Cable entries de
d2d2
146
27
www.ilm-saifor.es
FRONT VIEW FRONT VIEW3D Version
FRONT VIEW2D Version
FRONT VIEW4D Version
SIDE VIEW (without pannel)
TOP VIEW Cable entries details
tails Dimensions in mm.
d2
d1
d2
h3h2h1
37.5
27 9
146
t
INNOVATION LABS & MANUFACTURERS Global Headquarters International Sales Polígono Industrial La Plana, Nave 408785 Vallbona d’Anoia · Barcelona · SPAINTel. +34 93 771 90 90 Email: [email protected] · www.saifor.com
+
ARCTIC 3.0