imagerunner ir60 service guide.pdf

CANON U.S.A., INC. Rev. 0 TECHNICAL SUPPORT DIVISION Jamuary 2000

SERVICE GUIDE

imageRUNNER 60

imageRUNNER 60 Service Guide

imageRUNNER 60 Service Guide REV. 0 January 2000 Page i

IMPORTANT

SPECIFICATIONS AND OTHER INFORMATION CONTAINED HEREIN MAY VARY SLIGHTLY FROM ACTUAL MACHINE VALUES OR THOSE FOUND IN ADVERTISING AND OTHER PRINTED MATTER. USE OF THIS SERVICE GUIDE SHOULD BE STRICTLY SUPERVISED TO AVOID DISCLOSURE OF CONFIDENTIAL INFORMATION.


imageRUNNER 60 Service Guide REV. 0 January 2000 Page ii

Published by Canon U.S.A., Inc. One Canon Plaza Lake Success, NY 11042-1198 Canon U.S.A. Homepage: http://www.usa.canon.com Printed in the United States of America. Distributed in the United States by Canon U.S.A., Inc. This service guide is the property of Canon U.S.A., Inc. All rights reserved. The information contained in this service guide constitutes confidential information of Canon U.S.A., Inc. Pursuant to the dealer agreement with Canon U.S.A., Inc., this service guide is solely for reference purposes and may be used only by authorized Dealers of Canon U.S.A., Inc. No part of this service guide may be reproduced or transmitted in any form by any means, electronic or mechanical, for any purpose without the prior written consent of Canon U.S.A., Inc., except as expressly permitted herein. Pursuant to the dealer agreement with Canon U.S.A., Inc., Dealer agrees to indemnify Canon U.S.A., Inc. and to hold it harmless from and against any claims arising out of Dealers possession, use, or misuse of this service guide. Canon U.S.A., Inc. may, at its sole discretion, modify the information and/or specifications contained in this service guide at any time without notice. Canon is a trademark of Canon Inc. NetSpot and imageRUNNER are trademarks of Canon Inc. PCL is a registered trademark of Hewlett-Packard Corporation. EFI is a trademark of Electronics for Imaging. Continuous Print and RIP-While-Print are trademarks of Electronics for Imaging. Windows is a registered trademark of Microsoft Corporation. IBM is a registered trademark of IBM, Inc. Adobe and PostScript are trademarks of Adobe Systems Inc. IPX/SPX and NetWare are registered trademarks of Novell, Inc. Novell is a registered trademark of Novell Inc. UNIX is a registered trademark in the United States and other countries, licensed exclusively through X/Open Company Limited. AppleTalk is a registered trademark of Apple Computer, Inc. TrueType and Macintosh are trademarks of Apple Computer, Inc. TV Elite Pro is a registered trademark of ADS ADS is a trademark of Advanced Digital Systems Technologies. Proxima Desktop Projector is a trademark and Proxima is a registered trademark of Proxima Corporation. The Energy Star name is a trademark of the U.S. Environmental Protection Agency. All other company names and product names may be trademarks or registered trademarks of their respective owners, and are hereby acknowledged.


imageRUNNER 60 Service Guide REV. 0 January 2000 Page iii

TABLE OF CONTENTS I. PRODUCT OVERVIEW..................................................................................................................1 II. DESIGN FEATURES .......................................................................................................................1

A. NetSpot ...................................................................................................................................................... 1 B. Confidential User Mailboxes......................................................................................................................... 1 C. Booklet Maker............................................................................................................................................... 1 D. High Speed, High Image Quality .................................................................................................................. 1 E. Standard Image Server .................................................................................................................................. 1 F. No-Stacking Duplexing Mechanisms ............................................................................................................ 2 G. Large Paper Sources...................................................................................................................................... 2 H. High Image Quality ....................................................................................................................................... 2 I. Various Delivery Processing (With Accessory) ............................................................................................ 2 J. Finisher-D1 ................................................................................................................................................... 2 K. Saddle Finisher-D2........................................................................................................................................ 2 L. Configuration Chart....................................................................................................................................... 3

III. SPECIFICATIONS...........................................................................................................................4 A. imageRUNNER 60........................................................................................................................................ 4 B. Paper Deck-C1 .............................................................................................................................................. 5 C. Finisher-D1 ................................................................................................................................................... 5 D. Paper Folding Unit-B1 .................................................................................................................................. 5 E. Cover Insertion Unit-A1................................................................................................................................ 6 F. Saddle Finisher-D2........................................................................................................................................ 6 G. Network Multi-PDL Printer Board-F1 .......................................................................................................... 7

IV. SERVICE FEATURES .....................................................................................................................8 A. Serviceability................................................................................................................................................. 8 B. Upgrading...................................................................................................................................................... 8 C. Upgrading Network Multi-PDL Printer Board-F1 ...................................................................................... 10 D. Service Mode .............................................................................................................................................. 10 E. Power and Plug Requirements..................................................................................................................... 10 F. Estimated Installation Time......................................................................................................................... 11 G. Consumables ............................................................................................................................................... 11 H. Periodic Replacement Parts......................................................................................................................... 11 I. Consumable Parts........................................................................................................................................ 12 J. Finisher-D1 Consumable Parts.................................................................................................................... 13 K. Saddle Finsiher-D2 Consumable Parts ........................................................................................................ 13 L. Paper Deck-C1 Consumable Parts............................................................................................................... 13 M. Customer Maintenance................................................................................................................................ 13 N. Periodic Maintenance Items ........................................................................................................................ 14 O. Stapler Stacker Finisher-D1 Periodic Maintenance Items........................................................................... 15 P. Saddle Finisher-D2 Periodic Maintenance Items ........................................................................................ 16


imageRUNNER 60 Service Guide REV. 0 January 2000 Page iv

V. SERVICE POLICY.........................................................................................................................17 A. Customer/Dealer Support ............................................................................................................................ 17 B. Technical Support Division......................................................................................................................... 17 C. Systems Support Division ........................................................................................................................... 18

1. Systems Support Division............................................................................................................................ 18 2. Internet / World Wide Web Access.............................................................................................................. 18 3. Multi-Line Bulletin Board Systems............................................................................................................... 18 4. Automatic Document Retrieval Systems (Fax Back On Demand) ..................................................................... 18 5. Connectivity Support ................................................................................................................................... 19

D. Recommended Monthly Print Volume........................................................................................................ 20 E. Warranty Conditions ................................................................................................................................... 20

1. End User Warranty ...................................................................................................................................... 20 2. Warranty Administration Reduction Program (WARP) ................................................................................ 20

F. Dealer Parts Support Program..................................................................................................................... 21 G. Return of Empty Toner Cartridge................................................................................................................ 22

VI. SUGGESTED MAINTENANCE AGREEMENT ........................................................................23 A. Suggested Maintenance Agreement Rates................................................................................................... 23 B. Estimated Cost ............................................................................................................................................ 24

1. imageRUNNER 60 ...................................................................................................................................... 24 C. Annual Suggested Maintenance Agreement Rates For Optional Accessories ............................................. 25 D. Data Sheet ................................................................................................................................................... 26

1. imageRUNNER 60 ...................................................................................................................................... 26 VII. TRAINING.......................................................................................................................................27

A. Overview..................................................................................................................................................... 27 B. Materials...................................................................................................................................................... 27

VIII. SERVICE AUTHORIZATION REQUIREMENTS....................................................................28 A. Authorization Policy ................................................................................................................................... 28 B. Requirements............................................................................................................................................... 29

IX. APPENDIX ......................................................................................................................................31 A. imageRUNNER 60 Product Limited Warranty........................................................................................... 31 B. imageRUNNER 60 Product Accessory Limited Warranty................................................................................. 32 C. imageRUNNER GPR-1 Drum Limited Warranty ....................................................................................... 33


imageRUNNER 60 Service Guide REV. 0 January 2000 Page 1

I. Product Overview The imageRUNNER 60 is a high-speed printer created to improve workgroup manufacturing and Print on Demand requirements with the ability to handle the high quality production level of printing. The main unit is a high-speed, high-endurance printer with a full array of network printing capabilities. With the optional Finisher-D1, Saddle Finisher-D2, Cover Insertion Unit-A1, and Paper Folding Unit-B1, the imageRUNNER 60 features full finishing in the form of multi-position stapling, 3-hole punching, Z-folding, and document insertion. The imageRUNNER 60 also features support for a single pass duplex system to output duplex prints at rated engine speed and standard finishing capabilities1. Offering the most robust finishing capabilities in its class, the imageRUNNER 60 is targeted to the high-speed network printer, and industrial printing market. As an ENERGY STAR Partner, Canon U.S.A., Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency.

II. Design Features

A. NetSpot NetSpot offers a consistent user interface across all computing platforms and simplifies the process for installation, configuration, and device management.

B. Confidential User Mailboxes Confidential print jobs can be placed in a mailbox, which can be printed out later. Support of up to 100 (00-99) User Mailboxes.

C. Booklet Maker The imageRUNNER 60 can arrange originals into booklet format.

D. High Speed, High Image Quality 1. Print Speed:

up to 60 prints per minute 2. Writing Resolution:

1200 (equivalent) x 600 dpi

E. Standard Image Server The imageRUNNER 60 comes standard with a 2.1GB hard drive capable of electronic sorting.

1 To output documents it is necessary to purchase either the optional Finisher-D1 or the Saddle Finisher-D2.



F. No-Stacking Duplexing Mechanisms The printer does not stack sheets in a duplexing unit, enabling an uninterrupted flow of sheets when making double-sided prints.

G. Large Paper Sources With the addition of the Side Paper Deck-C1, the imageRUNNER 60 can keep as many as 7,650 sheets of paper for ready supply. Cassette 1: 1,500 sheets Cassette 2: 1,500 sheets Cassette 3: 550 sheets Cassette 4: 550 sheets Multifeeder: 50 sheets Side Paper Deck-C1 (accessory) 3,500 sheets

H. High Image Quality The Digital Image Processing System refines the print quality of the images by smoothing, which allows for 1200 dpi equivalent x 600 dpi in text mode or text/photo mode. The new A-Si drum with the Toner Replenishment System allows for less replacement steps, no standby period and material recycling. The newly developed toner cartridge will produce sharper, higher quality images.

I. Various Delivery Processing (With Accessory) Finisher-D1 (accessory): 1 or 2 point stapling Saddle Finisher-D2: Book binding (middle fold)

J. Finisher-D1 The Finisher-D1 has one fixed tray (sample tray), one shifting tray, and a Multi-position stapler, which are standard.

K. Saddle Finisher-D2 A Mini-CRD that has two shifting trays, Multi-position stapler, puncher and saddle stitch, which are all standard. The Z-fold and Post Processor Inserter are optional. Saddle Finisher-D2 outputs the document face down.



L. Configuration Chart

Items included in the imageRUNNER 60 printer Box: Developer Unit x 1 Developer Plate Attachment x 1 Original Output Tray x 1 Size Plate x 1 imageRUNNER 550/600/60 Drum x 1 Cassette-P2 (Universal) x 2 imageRUNNER 60 Manual x 1 Machine Warranty Card x 1 Drum Warranty Card x 1 Registration Card USA x 1 Registration Card Canada x 1 Installation Checklist x 1 Document Tray

Supplies: Transparency Type E 9-70015-E1 imageRUNNER 550/600/60 Drum F43-6601-700 imageRUNNER 550/600/60 Black Toner F42-3001-700 Staple Cartridge-D2 F23-2930-000 Staple-E1 F23-5705-000 Roll Paper for C.C.P.-A1 SSF-H1200 Connectivity Accessories: Network Multi-PDL Printer Board-F1 F61-7403-SET Network Interface Kit-TR4 F61-6558-100 Other Accessories: Cover Insertion Unit-A1* F24-9502-000 Cassette-P2 F32-1512-000 Document Tray-C1 F31-9701-000 * Available only as an option with the Saddle Finisher-D2.

Saddle Finisher-D2 F24-9511-000

Finisher-D1 F24-9411-000

Paper Folding Unit-B1* F24-9503-000*

imageRUNNER 60 F13-5633-001

Paper Deck-C1 F24-6313-000



III. Specifications

A. imageRUNNER 60 Type: High Volume Print Production System Imaging System: Laser Dry Electrostatic Transfer System Document Tray: Fixed type Photoconductor: Amorphous Silicon Drum (Estimated Yield: 5,000,000) Cleaning Method: Blade Charging Method: Corona Charging Fixing Method: Heat Roller Resolution: Engine:

600 dpi x 600 dpi Enhanced:

1200 dpi x 600 dpi Maximum Print Size: 11x17 (Ledger) Duplexing: Standard automatic single pass duplexing Warm-up Time: 5 minutes or less Print Speed: up to 60 cpm (LTR)

up to 46 cpm (LTR-R) up to 30 cpm (11x17)

Memory Capacity: 18 MB DRAM Page Memory (Memory Board) 2.1 GB HDD Image Server standard load

Paper Feed Method: 2 front load cassettes 2 high capacity trays Stack bypass

Maximum Paper Feed: 4150 sheets (2 x 550 front load cassettes & 2 x 1,500 high capacity trays & 50 stack bypass)

7650 sheets (4,150 + 3,500 Paper Deck-C1) Power Supply: 120v Dimensions (HxWxD): 44-3/4 x 30-1/8 x 31-3/8 Installation Space (WxD): 55-3/4 x 33-3/8 Weight: 553 lbs.



B. Paper Deck-C1 Paper Capacity: 3500 sheets Paper Size: 8-1/2 x 11 Letter Paper Weight: 17 lb. Bond to 110 lb. index Power Source: Directly from main unit Weight: Approx. 90.3 lb. Dimensions: (H x W x D) 20-1/2 x 12-3/4 x 33

C. Finisher-D1 Number of Trays: 2 trays Tray capacity: Top Tray2:

250 sheets Non-Staple (All sizes) Lower Tray:

2,000 sheets, 100 sets (Letter) 1,000 sheets, 100 sets (11 x 17)

Paper Size: Top Tray: Postcard-11 x 17 Lower Tray: STMT-11 x 17 Staple Position: Multi-Position stapling:

Top corner 2 sided margin (2 patterns) Two side margin (1 pattern)

Stapling Capacity: 50 sheets (Letter-11 x 17) Power Source: Directly from main unit Weight: Approx. 141 lb. Dimensions: (H x W x D) 39-1/4 x 25-3/4 x 27-7/8

D. Paper Folding Unit-B13 Acceptable Document Size: 11 x 17 only Foldable Document Weight: 17lb. to 20 lb. Bond Power: Directly from main unit. Weight: Approx. 99.2 lb. Dimensions: (H x W x D) 39-1/.4 x 7-1/4 x 27-7/8 2 Only lower tray shifts 3 Available as an option only with the Saddle Finisher-D2.



E. Cover Insertion Unit-A14 Maximum Stacking Capacity: 100 sheets Acceptable Document Size: Statement to Ledger Acceptable Document Weight: 17 lb. to 110 lb. Index Power: Directly from unit Weight: Approx. 44 lb. Dimensions: (H x W x D) 5-3/4 x 22-1/8 x 22-7/8

F. Saddle Finisher-D2 Number of Trays: 3 Trays (One Saddle Stitch) Tray capacity: Top Tray5:

1,000 sheets, 100 sets (Letter) 500 sheets, 100 sets (11 x 17)

Lower Tray5:

2,000 sheets, 100 sets (Letter) 1,000 sheets, 100 sets (11 x 17)

Saddle Stitch Tray: 15 sheets (60 sheets Original), 30 sets Staple/Punch Positions: Multi-Position stapling: Top corner 2 sided Margin (2 patterns) Two side margin (1 pattern) 3-hole punch (left margin) Staple/Punch Capacity: 50 sheets (Saddle stitch 15 sheets) Saddle Stitch Specifications: Total Sides Imaged:

60 total sides (15 sheets) Total Sets: 30 total sets Folding: V Folding standard

Paper Size: LTR-R - 11 x 17 Top Tray: Postcard - 11 x 17

Lower tray: STMT - 11 x 17 Punch Method: Rotary (1 sheet at a time) Punch Speed: 60 ipm Punch Paper Dust Stock: 15,000 sheets Power Source: Directly from main unit Weight: Approx. 233 lb. Dimensions: (H x W x D) 39-1/4 x 31 x 27-7/8 4 Cover sheet mode only (no sheet insertion mode) / Available as an option only with the Saddle Finisher-D2. 5 Top and Lower Tray shifts.



G. Network Multi-PDL Printer Board-F1 Type: Embedded Print/Network Processor: RISC, MIPS R5000, 200 MHz RAM: Standard: 32 MB (168 pin DIMM)

Maximum: 64 MB (168 pin DIMM) Two DIMM slots available PDL Support: Adobe PostScript 3 PCL5e HPGL2 (PCL Emulation Only) PostScript Fonts: 139 Type 1 and Type 3 PCL Fonts: 45 True Type Hard Disk: 2.1 GB Optimized Features: Continuous Print RIP-While-Print Printer Interface Ports: Bi-directional Centronics (Auto sensing) Network Controller Specifications: Topology: Ethernet Token Ring (Optional) Speed: 10/100 Mbps Ethernet 4/16 Mbps Token Ring Protocols Supported Ethernet: Ethernet: TCP/IP IPX / SPX Ethernet Peer to Peer AppleTalk Token Ring: TCP/IP SPX/IPX Network Interface Connections: Ethernet: 10/100 Base T (RJ45) AUI (D Sub 15), 10 Base2 with external transceiver (not included) Token Ring: 10 Base 5 RJ45 DB9



IV. Service Features

A. Serviceability To ensure machine reliability and prints of the highest quality, Canon U.S.A., Inc. recommends that a Quality Assurance visit be performed every 250,000 prints. Quality Assurance requires the cleaning, checking, and replacement of parts as necessary for specific areas every 250,000 prints. The frequency of the Quality Assurance visits will depend on the following conditions: monthly print volume, environment, type of originals printed and customers handling of the printer equipment.

QA750K

QA500KInstallation

QA250K

A QA Procedure will require the replacement of various consumable parts every 250,000 prints.

B. Upgrading The Image Processor Printed Circuit Board (PCB) and Multi-Function Controller (MFC) PCB are each equipped with Double Inline Memory Module (DIMM), which contains Flash ROM and Firmware programmed into each DIMM.

Note: A Personal Computer is required when installing upgraded firmware. Use Bicentronics I/F cable6 as an interface between the personal computer and the imageRUNNER 60 to enable high-speed transmission of the data. The required time to complete the upgrade is approximately ten minutes.

6 The following Bicentronics I/F cable is required: One end of the cable should have a TYPE A connector prescribed

by IEEE1284 (25 pin, for PC connection). The other end should have a TYPE B connector (38 pin, for copier connection). Cables conforming to the IEEE1284 are marked IEEE Std. 1284 compliant.



B. Upgrading (contd) The recommended specifications for the PC to use for the download are listed below.

1) CPU: Pentium 133MHz or higher

(A Pentium 75MHz proved to be inadequate) 2) Memory: 16MB or more 3) Empty HD Capacity: 10MB7 of available hard disk space 4) Printer Port: ECP mode must be both supported and selected

Download software will be provided to the dealer via Canon On-line. The download software will provide RAM data (setting of service mode and user mode) back-up function.

7 Download tool (software) only. Actual space depends on the quantity (volume) of software, such as program software from old

version or from other model machines, for which a back up is to be performed. A separate space is needed to house the IP (2MB) and MFC (4MB) for the imageRUNNER 60.



C. Upgrading Network Multi-PDL Printer Board-F1 Since the Network Multi-PDL Printer Board-F1 system software requires a large memory capacity, it will be provided in the form of a CD-ROM. This upgrade is done in the same way as the main unit firmware upgrade; by downloading the CD-ROM data from a PC to the printer extension boards HDD via a Bicentronics I/F.

D. Service Mode In order to decrease the down time of the main unit, where efficient regular service is possible, the number of sheets used for regular exchange parts/consumable parts can be confirmed in service mode. Using the main service mode, the technician can efficiently implement / prepare for the exchange of parts and the next regular service.

E. Power and Plug Requirements The imageRUNNER 60 requires a 20 AMP outlet as well as a NEMA 5-20R receptacle 20-ampere outlet (See Figure 1) for proper operation. Confirm that a NEMA 5-20R receptacle is available prior to installation.

CAUTION DO NOT ATTEMPT TO PLUG THE imageRUNNER 60 PRINTER INTO A STANDARD NEMA 5-15R RECEPTACLE. DOING SO MAY RESULT IN AN OVERLOAD TO THE ELECTRIC CIRCUITS OR DAMAGE TO THE COPIER.

Figure 1

NEMA 5-20R Receptacle (20 ampere)



F. Estimated Installation Time Description Estimated Time

imageRUNNER 60 45 minutes Finisher-D1 30 minutes Saddle Finisher-D2 30 minutes8 Paper Deck-C1 15 minutes Network multi-PDL Printer Board-F1 40 minutes Network Interface Kit-TR4 30 minutes

G. Consumables No. Description Product Number Quantity

Expected Yield/Life9 Remarks

1 imageRUNNER 60 Drum Unit F43-6601-700 1 5,000,000

sheets

2 imageRUNNER 60 Black Toner F42-3001-70010 1 33,000

11 sheets

6% line document, 0.05g/LTR/ 1 sheet

H. Periodic Replacement Parts No. Description Part Number12 Quantity Estimated Yield/Life9

1 Pre-transfer/ transfer/separation/ primary corona wire

FY3-0040-000 AR 250,000 sheets

2 Primary grid wire FY1-0883-000 AR 500,000 sheets 3 Thermistor FH7-7463-000 1 500,000 sheets 4 Thermistor No. 2 FH7-7464-000 1 500,000 sheets 5 Thermoswitch FH7-6281-000 1 1,000,000 sheets

8 Does not include Cover Insertion Unit-A1 or Paper Folding Unit-B1. An additional 60 minutes is needed to install both of these

options. 9 Estimated average values in the field, based upon data from supplier. Data is subject to change depending upon many factors

including, without limitation, monthly printer volume, environment, type of image printed or copied and customer handling of the equipment

10 Includes 3 bottles of toner. 11 Approximate yield for 1 bottle of toner. 12 Part Numbers are subject to change due to engineering changes, etc.



I. Consumable Parts No. Description Part Number12 Quantity Estimated Life9 Remarks 1 Developing cylinder FB4-1819-000 1 1,000,000 sheets 2 Developer roller FS5-6579-000 2 1,000,000 sheets 3 Cleaner separation claw FB4-8018-000 3 250,000 sheets

4 Cleaning Blade FB4-1596-000 1 1,000,000 sheets One edge: 500,000 sheets 5 Primary charging unit FG6-2015-000 1 1,000,000 sheets

6 Transfer / separation charging unit FG6-2045-000 1 1,000,000 sheets

7 Pre-transfer charging unit FG6-2016-000 1 1,000,000 sheets 8 Primary charging cleaner 1 FF2-3552-000 2 500,000 sheets 9 Primary charging cleaner 2 FF2-3551-000 2 500,000 sheets

10 Transfer charging cleaner 1 FF5-6883-000 1 500,000 sheets 11 Transfer charging cleaner 2 FF5-6884-000 1 500,000 sheets 12 Separation charging cleaner FF5-7891-000 1 500,000 sheets

13 Pre-transfer charging cleaner FF5-3090-000 1 500,000 sheets

14 Pre-transfer charging scraper FF5-7934-000 1 500,000 sheets

15 Upper fixing roller FB2-7200-000 1 500,000 sheets 16 Lower fixing roller FB4-2220-000 1 500,000 sheets 17 Fixing web FY1-1157-000 1 500,000 sheets 18 Insulating brush (front/rear) FB2-7239-000 2 500,000 sheets

19 Upper delivery separation claw FC1-0391-040 6 500,000 sheets Exchange at same time as with the Upper fixing roller.

20 Lower delivery separation claw FA2-9037-000 2 1,000,000 sheets

21 Curl Guide (center) FF5-9413-000 1 500,000 sheets 22 Curl Guide (front) FF5-9543-000 1 500,000 sheets 23 Curl Guide (rear) FF5-9544-000 1 500,000 sheets

24 Pick-up roller (Deck/Cassette) FB4-2033-000 8 250,000 sheets

25 Pick-up / Feeding roller (Deck / Cassette) FB4-2034-000 8 250,000 sheets

26 Separation roller (Deck / Cassette) FB2-7777-020 4 250,000 sheets

27 Pick-up roller (stack bypass) FB4-2033-000 2 120,000 sheets

28 Pick-up / Feeding roller (stack bypass) FB4-2035-000 2 120,000 sheets

29 Separation roller (stack bypass) FB2-7545-000 1 120,000 sheets

Number of sheets actually used.



J. Finisher-D1 Consumable Parts No. Description Part Number12 Quantity Estimated Life9 Remarks

1 Stapler FB4-5390-000 1 500,000 staples 5,000 stapling operations per cartridge.

2 Paddle FB4-8435-000 3 1,000,000 sheets

K. Saddle Finsiher-D2 Consumable Parts No. Description Part Number12 Quantity Estimated Life9,13 Remarks

1 Staple unit FB4-5390-000 1 Staple 500,000 times

2 Paddle FB4-8435-000 3 1,000,000 sheets

3 Upper delivery roller (for stack tray only) FB4-8363-000 1 1,000,000 sheets

4 Rollette belt FB4-8709-000 4 1,000,000 sheets

Finisher assembly

5 Staple unit FB3-7860-000 2 Staple 100,000 times Saddle stitcher assembly

6 Punch unit (inch) FG6-3320-000 1 1,000,000 times

Puncher assembly 100,000 times when the rate of 200g/m2 paper use is 5%

7 Pick-up roller FB4-7640-000 2 250,000 sheets 8 Feeder roller unit14 FG6-2748-000 1 250,000 sheets 9 Separation belt14 FC2-1827-000 11 250,000 sheets

10 Separation unit14 FG6-3304-000 1 250,000 sheets

Cover Insertion Unit-A1

11 Static eliminator (right) FA1-4842-030 1 1,000,000 sheets 12 Static eliminator (left) FA4-2371-000 1 1,000,000 sheets

Paper Folding Unit-B1

L. Paper Deck-C1 Consumable Parts No. Description Part Number12 Quantity Estimated Life (Prints) 9 Remarks

1 Pick-up roller FB4-2033-000 1 200,000 sheets 2 Feeding roller FB4-2034-000 1 200,000 sheets 3 Separation roller FB2-7777-020 1 200,000 sheets

The number of prints is the total of sheets actually used.

M. Customer Maintenance No. Item Timing 1 Clean static eliminator As required

13 These values all refer to A4 size as counter values taken from the finisher counter in service mode. 14 Replacement of the Separation unit, FG6-3304-000, (including the Feed roller unit, FG6-2748-000 and the Separation belt,

FC2-1827-000) is recommended. However, it is possible to replace the Feed roller unit or Separation belt individually.



N. Periodic Maintenance Items !:clean :replace ":lubricate :adjust :inspect

Unit Part On Installation Every

250,000 prints

Every 500,000 prints


Every 1,000,000

prints Remarks

External control

Ozone filter !

Dust proof filter !

Corona wires (primary, pre-transfer, transfer / separation)

!

Gold wires (primary) ! !

Transfer unit shield plate

! !

Charging unit

Roller electrodes ! !

Photosensitive Drum

Photosensitive Drum ! Use Alcohol and Drum Cleaning Powder (CK-0429).

Slip ring ! Use Alcohol and apply Barrierta Grease (FY9-6008).

Developing unit

Developing cylinder

Developing unit roller

!

Cleaner Side scraper !

Toner Tray (Front/Rear)

!

Magnetic roller !

Delivery Separation claw (upper and lower) !

Waste toner collection Waste toner box

Inspect / remove

Fixing unit Inlet guide !

Web Take up slack upon installation

Oil receptacle !

Thermistor !

Sub Thermistor !

Thermoswitch !



!:clean :replace ":lubricate :adjust :inspect

Unit Part On Installation Every

250,000 prints



Every 1,000,000

prints Remarks

Paper Feed / Feeder Assembly

Transfer guide !

Register roller (upper and lower)

!

Feed belt !

Each feed roller !

Double-Sided unit

Regisensor on both sides

!

O. Stapler Stacker Finisher-D1 Periodic Maintenance Items !:clean :replace ":lubricate :adjust :inspect Item Every 250,000 prints15 Remarks

Stack Tray B Paper Sensor !!!! Use blower brush

Inlet Path Paper Sensor !!!!

Buffer Path Paper Sensor !!!!

Lower Path Paper Sensor !!!!

15 This is the minimum interval for the imageRUNNER 60.



P. Saddle Finisher-D2 Periodic Maintenance Items !:clean :replace ":lubricate :adjust :inspect

Item Every

100,000 prints


Remarks

Paper sensor (4 locations) !!!!

Entrance path sensor !!!!

Buffer path sensor !!!!

Lower path sensor !!!!

Finisher assembly

Punch scraps sensor prism !!!! Puncher assembly

Punch assembly (5 locations) !!!! When replacing Punch unit

Paper set sensor !!!!

Feeder roller !!!!

Pick-up roller !!!!

Separation belt !!!!

Extraction roller !!!!

Cover Insertion Unit-A1

Folding roller A/B/C !!!!

No. 2 folding roller !!!! Paper Folding Unit-B1



V. Service Policy

A. Customer/Dealer Support The customer/dealer support for the imageRUNNER 60 is as listed below:

Inquiries Origin Supported by General - Product Information, Installation Information, Network Assistance

Dealers

System Support Division Technical Support Center 1-800-528-2830 9am to 6pm (EST)

Hardware, accessories, and connectivity devices Dealers Regional ISG Copier Service

Software - required to operate the system Dealers

Systems Support Division (SSD), System Engineers through Technical Support Center/System, Engineer at Dealership

Product Information/ Troubleshooting information

Dealers SSD Fax Back System 1-516-328-4282

Product Information/Print Drivers Customers/Dealers

Canon World Wide Web Site; (http://www.usa.canon.com/) Go to Software Center at this site; SSD Bulletin Board System 1-516-328-5898

Product & Technical Information Dealers Canon On-line

B. Technical Support Division 1. Regional ISG Service Offices The ISG Regional Service Office will provide hardware and connectivity hardware support to dealers on the operation of the imageRUNNER 60. 2. Canon On-line Canon On-line is an on-line service developed to communicate and distribute information to Canons network of dealers through electronic means. Using Canon On-Line, dealers can access the library in which the technical publications and service guides are available as electronic data.



C. Systems Support Division 1. Systems Support Division

The Systems Support Division (SSD) has been established specifically to support the dealer in the connectivity and system network areas. SSD is the connectivity answer source for Canon ISG Dealers.

1.1. Technical Support Center The Systems Support Division Technical Support Center will provide software support for the imageRUNNER 60 to dealers. The Technical Support Center telephone number is; 1-800-528-2830, the hours are 9 AM to 6 PM (EST). The Technical Support Center may cover areas such as:

Interfacing Connectivity issues Product functionality Technical questions Product information

2. Internet / World Wide Web Access The Canon Website is at http://www.usa.canon.com. Along with the latest product information, dealers will have access to the Software Center. The Center provides a wide range of specific product documentation, printer drivers, utilities, and detailed technical bulletins that are available 24 hours a day, 7 days a week.

3. Multi-Line Bulletin Board Systems Allows multiple user access, upload or download the latest printer driver and utilities, as well as technical information via your computer. Call 1-516-328-5898. The modem setting is 8/N/1, up to 28,800-baud rate and is available 24 hours a day, 7 days a week.

4. Automatic Document Retrieval Systems (Fax Back On Demand) A Fax Back (Automatic Document Retrieval System) System is an automated way for customers to obtain information directly from a company. The customer calls an automated telephone system, makes menu choices as to the information they want, and inputs their fax number. The requested information is then faxed to the customer. This alternate avenue of support can provide vital information (such as product specifications and answers to common technical questions) automatically received via fax or by calling 1-516-328-4282. Fax Back on Demand is available 24 hours a day, 7 days a week.



C. Systems Support Division (contd) 5. Connectivity Support

The Canon Connectivity escalation procedure is diagrammed below. This same procedure will be utilized for the support of the imageRUNNER 60.

Canon Connectivity Support

Systems Support Division Product Information - Software Installation - Network Assistance

Technical Support Center 1-800-528-2830

WWW - Software Center http:// www.usa.canon.com

Bulletin Board System 1-516-328-5898

Fax Back System 1-516-328-4282

Technical Support Division Hardware Support

Engineering Services Dept. Digital Imaging Black & White

Canon USA Regional

Office

SSD System

Engineer

Technical Support

Dealership

System Engineer

Service

Customer

Service Request or Software / Connectivity Inquiry

Canon On-Line Technical Publications and

Service Guides



D. Recommended Monthly Print Volume The suggested maximum monthly print volume:

!" 250,000 prints The optimum performance range is:

!" 30,000-120,000

E. Warranty Conditions For detailed end-user warranty information, please refer to the warranty cards located in the Appendix.

1. End User Warranty imageRUNNER 60 Product Warranty (end-user)

200,000 prints or 90 days, whichever comes first.

imageRUNNER 60 Product Accessory Limited Warranty (end-user)

90 days after delivery

imageRUNNER 60 Drum Warranty (end-user) Full Credit: 70,000 prints or 30 days from the date of

original purchase, whichever comes first.

Prorated Credit: 1,750,000 or 1 year from the date of original purchase, whichever comes first.

2. Warranty Administration Reduction Program (WARP) Dealers purchasing an imageRUNNER 60 printer and drum will receive WARP credit during the month following their purchase. The credit will cover the dealers cost for defective parts with a dealer cost under $300 replaced during the term of the end-user warranty. Defective drums and defective parts with a dealer cost over $300 that were replaced during the term of the end-user warranty should be returned along with all applicable documentation to Canon USA, Inc. for processing. Your Canon Regional Field Technical Specialist (FTS) or Regional Service Manager can answer any questions on this program.



F. Dealer Parts Support Program To help dealers hold down their cost of service, Canon U.S.A., Inc. has assembled a Parts Support Program." The dealer wholesale purchase price of each Network Multi-PDL Printer Board-F1 includes, at no additional charge to the dealer, replacement parts for defective parts found in each such unit for one year following the dealers installation of the unit. When a replacement part is required, a representative from your dealership can contact the Warranty Control Section in Lake Success at 1-516-328-5742. The Canon representative will request some essential information as described below about the service call, as well as the desired shipping method for the requested part. Canon U.S.A., Inc. will provide standard delivery service at no charge; any requested upgrade in delivery service will be charged to your dealership. The requested part will be shipped on the same day the order was received, and will be accompanied by an information kit that should be used when returning the defective part. The defective part, the information kit, and the service log for the copier should be returned within 30 days, otherwise, your dealership will be charged the dealer cost of the part. Damaged parts returned due to mishandling at the dealership will be charged back at dealer cost. Examples of mishandling include, but are not limited to, physical damage due to improper storage, inappropriate use of tools, or improper installation procedure. When calling to request a replacement part, be prepared to provide us with the following information:

Dealer code and shipping address The first and last name of the person receiving the part Canon part number, description, and model Network Multi-PDL Printer Board-F1 installation date Network Multi-PDL Printer Board-F1 serial number (SN-xxxxxx) Specific problem the defective part is exhibiting (including any error

codes displayed) Method of shipment for the replacement part. The information kit will contain:

An instruction sheet, green-tag, (with all information pre-completed during phone conversation)

Return address label



F. Dealer Parts Support Program (contd) Please note: All imageRUNNER 60 Network Multi-PDL Printer Board-F1 replacement requests placed before 4:00 PM (eastern standard time) should be directed to the Warranty Control Section at Lake Success 1-516-328-5742. After 4:00 PM (Eastern Standard Time), all imageRUNNER 60 Network Multi-PDL Printer Board-F1 replacement requests, should be directed to the Drum Return Center at Irvine 1-714-753-4147. To provide the most accurate and current information, the list of available items from the imageRUNNER 60 Parts Support Program will be available via Canon On-Line. This allows your dealership to view or download the most recent imageRUNNER 60 Parts Support Program list. Included on the list will be; Canon part number, description, and repair pricing for out-of-warranty imageRUNNER 60 Network Multi-PDL Printer Board-F1.

G. Return of Empty Toner Cartridge Canon U.S.A. Inc. has made provisions for the dealer or the end-user to return empty imageRUNNER 60 (GPR-1) toner cartridges. Simply place the three (3) empty cartridges back in the original box, with the return label on the outer flap, and return to Canon. Please do not return any cartridges other than the GPR-1 toner cartridge in this box.



VII. Training A. Overview

Technicians trained on the imageRUNNER 600 will receive automatic certification for the imageRUNNER 60. Technicians requiring certification on the imageRUNNER 60 will need to enroll in the imageRUNNER 600 training course. Please refer to the imageRUNNER 600 Service Guide for detailed information.

B. Materials Model/Accessory Item Part #

imageRUNNER 600 Service Manual16 DU7-1100-000 imageRUNNER 60 Parts Catalog DU7-3103-000 imageRUNNER 600 Service Handbook DU7-2100-000 imageRUNNER 600 CD-ROM of:

imageRUNNER 550/600 Service Manual

imageRUNNER 550/600 Service Handbook

Finisher-D1 Service Manual ADF Service Manual Network Printer Board

Service Manual

DU7-C001-00Z

Finisher-D1 Service Manual FY8-13FF-000 Finisher-D1 Parts Catalog FY8-31E2-000 Paper Deck A1/B1/C1 Parts Catalog FY8-31D2-020 Network Printer Board-F1 Service Manual FY8-13FX-000 Network Printer Board-F1 Parts Catalog Included in the

imageRUNNER Parts Catalog (DU7-3100-000)

Saddle Finisher-D2 Service Manual FY8-13G9-000 Saddle Finisher-D2 Parts Catalog FY8-31ED-000

16 A Technical Publication will be issued explaining the differences between the imageRUNNER 60 and the imageRUNNER 600.



VIII. Service Authorization Requirements

A. Authorization Policy In order to become authorized and maintain your authorization to service the imageRUNNER 60, each dealer location must employ a sufficient number of technicians appropriate for the number of machines serviced by the location. The minimum number of technicians is one. Failure to maintain an adequate number of technicians can cause cancellation of the locations authorized status. As a result of being authorized, the location is ultimately responsible for the service provided to units that are placed by dealer personnel working out of that authorized location. Canon strongly recommends that each dealership location have at least one System Engineer17 (SE) to aid the technicians in the field to properly support a customers imageRUNNER 60 System with computers and computer networks. For a Canon copier dealership, a System Engineer working with Canon connectivity products would have the following basic job functions: Systems integration (pre-sale and post-sale) Installation Education of customers and dealership personnel Troubleshooting In order to successfully perform these tasks, it is crucial that the SE have strong computer skills and a working knowledge in the following areas (listed in order of importance): The major computer platforms (IBM compatible and Macintosh) Computer hardware (including cabling) Computer software (including drivers) Operating systems (DOS , Windows 95/98, and System 7/8) Network Operating System: Novell (latest version) Windows NT (latest version)

Protocols: IPX / SPX TCP / IP

Printing Scanning

17 A System Engineer (SE) is a professional title often used by hardware vendors for individuals who perform systems related

tasks, such as analysis, design, and programming. System Engineers are also often involved in pre-sales activities.



A. Authorization Policy (contd) In addition, computer skills and working knowledge in the following areas may also be helpful: Other computer platforms (mainframe and UNIX) Networking (Token Ring) Basic electronics Possible backgrounds, (listed in preferred order), of a successful Canon dealership SE are: Novell CNA or CNE certification / Microsoft MCSE Canon copier service technician with two years of experience centered

on connectivity products. A degree in computer science or engineering, or a computer technician with two years of experience in the above areas.

B. Requirements Dealer customer service will offer each customer who has acquired a Canon brand product distributed pursuant to this Agreement:

Loaner equipment or alternate means to produce prints during periods of extended downtime at no additional charge; and

Periodic on-site preventive maintenance. To restore equipment to full and complete operating status as quickly as possible, Dealer customer service will, unless Dealer and customer agree otherwise, provide each customer who has acquired a Canon brand product distributed pursuant to this Agreement:

Four (4) business hour guaranteed response time; Availability of spare parts at the customer site on next business day;

and Notification to customer as to when Dealer technician will arrive

at customers site or when parts will be delivered. In accordance with Canon USAs published escalation procedures for resolution of service problems, Dealer shall:

Contact Canon USA Technical Support Center for assistance for any recurring problem for which a Dealer has attempted to repair two (2) times without finding a solution.

Pay Canon USAs published rates and related expenses (e.g., parts, labor and travel) in cases where a Canon technical specialist is dispatched to repair a customers machine after the solution had previously been communicated (i) to Dealer by any of Canon USAs Technical Support Center or (ii) to all Dealers via Canon On-line.



B. Requirements (contd) Dealer agrees to maintain the following information to be disclosed to Canon USA upon request:

A complete and up-to-date service log for each customers machine at the customer site; and

A complete and up-to-date record of product training for each Dealer service technician.



IX. Appendix

A. imageRUNNER 60 Product Limited Warranty Canon U.S.A., Inc. (Canon USA) warrants this Canon imageRUNNER 60 Product (the Product) to be free from defects in workmanship and materials under normal use and service for a period of 90 days after delivery to the original purchaser or 200,000 prints, whichever comes first. During such warranty period, Canon USA shall replace, without charge, any defective part with a new or comparable rebuilt part. This warranty shall not extend to consumables, such as paper, chemicals, and toner as to which there shall be no warranty or replacement. Warranty replacement shall not extend the original warranty period of the Product. This warranty shall only apply if the Product is used in conjunction with compatible computers, peripheral equipment and software, as to which items Canon USA shall have no responsibility. This warranty does not cover any Canon imageRUNNER Product Accessory or Canon GPR-1 Drum, for which separate warranties are given. THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES REGARDING MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, RELATING TO THE USE OR PERFORMANCE OF THE PRODUCT. NO OTHER EXPRESS WARRANTY OR GUARANTY, EXCEPT AS MENTIONED ABOVE, GIVEN BY ANY PERSON, FIRM OR CORPORATION WITH RESPECT TO THE PRODUCT SHALL BIND CANON USA OR ANY CANON USA AUTHORIZED SERVICE PROVIDER (SERVICE PROVIDER). NO WARRANTY IS GIVEN ON ANY USED PRODUCT. This warranty shall be void and of no force and effect if the Product is damaged as a result of (a) abuse, neglect, mishandling, alteration, electric current fluctuation or accident, (b) improper use, including failure to follow operating instructions or maintenance and environmental conditions prescribed in Canon USAs operators manual, (c) installation or repair by other than service representatives qualified by Canon USA who are acting in accordance with Canon USAs service bulletins, (d) use of supplies or parts (other than those distributed by Canon USA) which damage the Product or cause abnormally frequent service calls or service problems, or (e) use of the Product with non-compatible computers, peripheral equipment or software, including the use of the Product in any system configuration not recommended in any manual distributed with the Product. Nor does this warranty extend to any Product on which the original identification marks or serial numbers have been defaced, removed or altered. ANY SYSTEM SOFTWARE (WHETHER FACTORY LOADED ON THE PRODUCT OR CONTAINED ON THE SOFTWARE DISKETTES OR CD-ROMS ENCLOSED WITH, OR ACCOMPANYING, THE PRODUCT), AND ANY UTILITY SOFTWARE, DISTRIBUTED WITH THE PRODUCT IS SOLD AS IS AND WITHOUT WARRANTY BY CANON USA. THE SOLE WARRANTY WITH RESPECT TO SUCH SOFTWARE IS CONTAINED IN THE SOFTWARE MANUFACTURERS LICENSE AGREEMENT DISTRIBUTED THEREWITH, INCLUDING ANY LIMITATIONS AND DISCLAIMERS THEREON. PLEASE CONTACT CANON USA IMMEDIATELY IF YOU HAVE NOT RECEIVED A COPY OF THE SOFTWARE MANUFACTURERS LICENSE AGREEMENT. NEITHER CANON USA NOR ANY SERVICE PROVIDER SHALL BE LIABLE FOR PERSONAL INJURY OR PROPERTY DAMAGE (UNLESS CAUSED SOLELY AND DIRECTLY BY THE NEGLIGENCE OF CANON USA OR ANY SERVICE PROVIDER), LOSS OF REVENUE OR PROFIT, FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, EXPENDITURES FOR SUBSTITUTE EQUIPMENT OR SERVICES, LOSS OR CORRUPTION OF DATA, STORAGE CHARGES OR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO USE THE PRODUCT OR ANY COMPONET THEREOF, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED AND EVEN IF CANON USA OR ANY SERVICE PROVIDER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST CANON USA OR ANY SERVICE PROVIDER BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT SOLD BY CANON USA AND CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, THE PURCHASER ASSUMES ALL RISKS AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO PERSONS AND PROPERTY OF THE PURCHASER OR OTHERS ARISING OUT OF THE POSSESSION, USE, MISUSE, OR INABILITY TO USE ANY PRODUCT SOLD BY CANON USA NOT CAUSED SOLELY AND DIRECTLY BY THE NEGLIGENCE OF CANON USA OR ANY SERVICE PROVIDER. THIS WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THE PRODUCT AND STATES SUCH PURCHASERS EXCLUSIVE REMEDY

CONDITIONS OF WARRANTY Defective parts must be returned to Canon USA with all necessary documentation. THIS WARRANTY APPLIES TO imageRUNNER 60 PRODUCTS PURCHASED AND USED IN THE U.S.A. ONLY. CANON U.S.A., INC. One Canon Plaza Lake Success, New York 11042-1198

Canon is a registered trademark of Canon Inc.



B. imageRUNNER 60 Product Accessory Limited Warranty Canon U.S.A. Inc. (Canon USA) warrants this Canon imageRUNNER Product Accessory (the Accessory) to the Canon imageRUNNER 60 Product (the Product) to be free from defects in workmanship and materials under normal use and service for a period of 90 days after delivery to the original purchaser. During such warranty period, Canon USA shall, at its sole option and without charge, exchange any defective part with a new or comparable rebuilt part or exchange any defective Accessory for a new or comparable used Accessory. This warranty does not cover consumable items as to which there shall be no warranty or replacement. Warranty exchange or replacement shall not extend the original warranty period of the Accessory. This warranty covers the Accessory only when it is attached or connected to an imageRUNNER 60 in the manner specified in Canon USAs literature. This warranty shall only apply if the Accessory is used in conjunction with compatible computers, peripheral equipment and software, as to which items Canon USA shall have no responsibility. THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES REGARDING MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, RELATING TO THE USE OR PERFORMANCE OF THE ACCESSORY. NO OTHER EXPRESS WARRANTY OR GUARANTY, EXCEPT AS MENTIONED ABOVE, GIVEN BY ANY PERSON, FIRM OR CORPORATION WITH RESPECT TO THE ACCESSORY SHALL BIND CANON USA OR ANY CANON USA AUTHORIZED SERVICE PROVIDER (SERVICE PROVIDER). NO WARRANTY IS GIVEN ON ANY USED ACCESSORY. This warranty shall be void and of no force and effect if the Accessory is damaged as a result of (a) abuse, neglect, mishandling, alteration, electric current fluctuation or accident, (b) improper use, including failure to follow operating instructions or maintenance and environmental conditions prescribed in Canon USAs operators manual, (c) installation or repair by other than service representatives qualified by Canon USA who are acting in accordance with Canon USAs service bulletins, (d) use of supplies or parts (other than those distributed by Canon USA) which damage the Accessory or cause abnormally frequent service calls or service problems, or (e) use of the Accessory with non-compatible computers, peripheral equipment or software, including the use of the Accessory in any system configuration not recommended in any manual distributed with the Accessory. Nor does this warranty extend to any Accessory on which the original identification marks or serial numbers have been defaced, removed or altered. ANY SYSTEM SOFTWARE (WHETHER FACTORY LOADED ON THE ACCESSORY OR CONTAINED ON THE SOFTWARE DISKETTES OR CD-ROMS ENCLOSED WITH, OR ACCOMPANYING, THE ACCESSORY), AND ANY UTILITY SOFTWARE, DISTRIBUTED WITH THE ACCESSORY IS SOLD AS IS AND WITHOUT WARRANTY BY CANON USA. THE SOLE WARRANTY WITH RESPECT TO SUCH SOFTWARE IS CONTAINED IN THE SOFTWARE MANUFACTURERS LICENSE AGREEMENT DISTRIBUTED THEREWITH, INCLUDING ANY LIMITATIONS AND DISCLAIMERS THEREON. PLEASE CONTACT CANON USA IMMEDIATELY IF YOU HAVE NOT RECEIVED A COPY OF THE SOFTWARE MANUFACTURERS LICENSE AGREEMENT. NEITHER CANON USA NOR ANY SERVICE PROVIDER SHALL BE LIABLE FOR PERSONAL INJURY OR PROPERTY DAMAGE (UNLESS CAUSED SOLELY AND DIRECTLY BY THE NEGLIGENCE OF CANON USA OR ANY SERVICE PROVIDER), LOSS OF REVENUE OR PROFIT, FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, EXPENDITURES FOR SUBSTITUTE EQUIPMENT OR SERVICES, LOSS OR CORRUPTION OF DATA, STORAGE CHARGES OR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO USE THE ACCESSORY OR ANY COMPONENT THEREOF, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED AND EVEN IF CANON USA OR ANY SERVICE PROVIDER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST CANON USA OR ANY SERVICE PROVIDER BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE ACCESSORY SOLD BY CANON USA AND CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, THE PURCHASER ASSUMES ALL RISKS AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO PERSONS AND PROPERTY OF THE PURCHASER OR OTHERS ARISING OUT OF THE POSSESSION, USE, MISUSE, OR INABILITY TO USE ANY ACCESSORY SOLD BY CANON USA NOT CAUSED SOLELY AND DIRECTLY BY THE NEGLIGENCE OF CANON USA OR ANY SERVICE PROVIDER. THIS WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THE ACCESSORY AND STATES SUCH PURCHASERS EXCLUSIVE REMEDY.

CONDITIONS OF WARRANTY

Defective parts must be returned to Canon USA with all necessary documentation. THIS WARRANTY APPLIES TO imageRUNNER 60 ACCESSORIES PURCHASED AND USED IN THE U.S.A. ONLY. CANON U.S.A., INC. One Canon Plaza Lake Success, New York 11042-1198




C. imageRUNNER GPR-1 Drum Limited Warranty Canon U.S.A., Inc. (Canon USA) warrants the photo-receptor drum (the Drum) for the Canon imageRUNNER Product (the Product) to be free from defects in workmanship and materials under normal use and service other than exterior defects, such as nicks, scratches, or dents, for a period of 30 days after delivery to the original purchaser of this Drum or use of it to make 70,000 prints, whichever comes first. If the Drum proves to be defective within this warranty period, Canon USA shall at its sole option, replace the Drum without charge. Following the expiration of the 30-day warranty period, and continuing for a period of ONE YEAR after delivery to the original purchaser of this Drum or use of it to make 1,750,000 prints, whichever comes first, Canon USA shall provide a credit to the original purchaser toward a replacement Drum, if the Drum in this Product fails to operate under normal use and service by reason of any defect in workmanship and materials other than exterior defects, such as nicks, scratches or dents. This credit shall be a percentage of the sale price of the replacement Drum determined as set forth in the example below. THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES REGARDING MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, RELATING TO THE USE OR PERFORMANCE OF THE DRUM. NO OTHER EXPRESS WARRANTY OR GUARANTY, EXCEPT AS MENTIONED ABOVE, GIVEN BY ANY PERSON, FIRM OR CORPORATION WITH RESPECT TO THE DRUM SHALL BIND CANON USA OR ANY CANON USA AUTHORIZED SERVICE PROVIDER (SERVICE PROVIDER). NO WARRANTY IS GIVEN ON ANY USED DRUM. This warranty shall be void and of no force and effect if the Drum is damaged as a result of (a) abuse, neglect, mishandling, alteration of the Product (including the Drum and product accessories), electric current fluctuation, exposure to light, or accident, (b) improper use, including failure to follow operating, maintenance and environmental conditions prescribed in Canon USAs operators manual, (c) installation or repair by other than service representatives qualified by Canon USA who are acting in accordance with Canon USAs service bulletins, or (d) use of supplies or parts (other than those distributed by Canon USA) which damage the Drum or cause abnormally frequent service calls or service problems, nor does this warranty extend to any Drum on which the original identification marks or serial numbers have been defaced, removed, or altered. NEITHER CANON USA NOR ANY SERVICE PROVIDER SHALL BE LIABLE FOR PERSONAL INJURY OR PROPERTY DAMAGE (UNLESS CAUSED SOLELY AND DIRECTLY BY THE NEGLIGENCE OF CANON USA OR ANY SERVICE PROVIDER), LOSS OF REVENUE OR PROFIT, FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, EXPENDITURES FOR SUBSTITUTE EQUIPMENT OR SERVICES, LOSS OR CORRUPTION OF DATA, STORAGE CHARGES OR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO USE THE DRUM, OR ANY COMPPONET THEREOF, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED AND EVEN IF CANON USA OR ANY SERVICE PROVIDER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST CANON USA OR ANY SERVICE PROVIDER BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE DRUM SOLD BY CANON USA AND CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, THE PURCHASER ASSUMES ALL RISKS AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO PERSONS AND PROPERTY OF THE PURCHASER OR OTHERS ARISING OUT OF THE POSSESSION, USE, MISUSE, OR INABILITY TO USE ANY DRUM SOLD BY CANON USA NOT CAUSED SOLELY AND DIRECTLY BY THE NEGLIGENCE OF CANON USA OR ANY SERVICE PROVIDER. THIS WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THE DRUM AND STATES SUCH PURCHASERS EXCLUSIVE REMEDY.

CONDITIONS OF WARRANTY Credit adjustments will be based on the sale price of the Drum, and will be pro-rated on the prints made as indicated by the service report submitted by the Canon USA Authorized Service Representative. The defective Drum must be returned to Canon USA, freight prepaid, in the original packaging with all necessary documentation (machine log, a sample copy, warranty claim tag, or other documents as required from time to time) to receive credit or replacement Drum.

EXAMPLE OF CREDIT

Calculation of the credit for a defective drum may be illustrated by the following example:

1,750,000 - 875,000 875,000 1,750,000 = 1,750,000 = 50% credit

Drum inoperative after 875,000 prints in less than ONE YEAR of use. THIS WARRANTY APPLIES TO CANON PHOTO-RECEPTOR DRUM SOLD AND USED IN THE U.S.A. ONLY. CANON U.S.A., INC. One Canon Plaza Lake Success, New York 11042-9979


CoverCopyrightTable Of ContentsPage iiiPage iv

I. Product OverviewII. Design FeaturesA. NetSpot....B. Confidential User MailboxesC. Booklet MakerD. High Speed, High Image QualityE. Standard Image ServerF. No-Stacking Duplexing MechanismsG. Large Paper SourcesH. High Image QualityI. Various Delivery Processing (With Accessory)J. Finisher-D1K. Saddle Finisher-D2L. Configuration Chart

III. SpecificationsA. imageRUNNER 60B. Paper Deck-C1C. Finisher-D1D. Paper Folding Unit-B1 3E. Cover Insertion Unit-A1 4F. Saddle Finisher-D2G. Network Multi-PDL Printer Board-F1

IV. Service FeaturesA. ServiceabilityB. UpgradingC. Upgrading Network Multi-PDL Printer Board-F1D. Service ModeE. Power and Plug RequirementsF. Estimated Installation TimeG. ConsumablesH. Periodic Replacement PartsI. Consumable PartsJ. Finisher-D1 Consumable PartsK. Saddle Finsiher-D2 Consumable PartsL. Paper Deck-C1 Consumable PartsM. Customer MaintenanceN. Periodic Maintenance ItemsO. Stapler Stacker Finisher-D1 Periodic Maintenance ItemsP. Saddle Finisher-D2 Periodic Maintenance Items

V. Service PolicyA. Customer/Dealer SupportB. Technical Support Division1. Regional ISG Service Offices2. Canon On-line

C. Systems Support Division1. Systems Support Division2. Internet / World Wide Web Access3. Multi-Line Bulletin Board Systems4. Automatic Document Retrieval Systems (Fax Back On Demand)5. Connectivity Support

D. Recommended Monthly Print VolumeE. Warranty Conditions1. End User Warranty2. Warranty Administration Reduction Program (WARP)

F. Dealer Parts Support ProgramG. Return of Empty Toner Cartridge

VI. Suggested Maintenance AgreementA. Suggested Maintenance Agreement RatesB. Estimated Cost1. imageRUNNER 60

C. Annual Suggested Maintenance Agreement Rates For Optional AccessoriesD. Data Sheet

VII. TrainingA. OverviewB. Materials

VIII. Service Authorization RequirementsA. Authorization PolicyB. Requirements

IX. AppendixA. imageRUNNER 60 Product Limited WarrantyB. imageRUNNER 60 Product Accessory Limited WarrantyC. imageRUNNER GPR-1 Drum Limited Warranty

imagerunner ir60 service guide.pdf

Documents