ImagineIMG-800-SWith refined styling and a streamlined profile, the Imagine is packed with new design innovations. This banner stand is our most popular removable cassette roller system and has been specially designed for maximum convenience and ease of use.

dimensions:

additional information:

- Variable height = 29.5” - 83.35”- Drop-in interchangable cassette accomodates graphic media up to 17.72 mils thick*

- New telescopic pole- New integrated pole storage for the twist & lock

telescopic pole- New accessory channel featured on the top of

the unit (for literature pocket)

features and benefits:- Add your own branding using the slide in

graphic channel along the banner stand base- Premium form molded EVA bag included- Graphic tensioner- Anti-slip strips along base- Lifetime warranty against manufacturer

defects

Assembled unit: 87”(h) max x 34.25”(w) x 8.50”(d) approx.2210mm(h) x 870mm(w) x 220mm(d) approx.

Base dimensions:3.75”(h) x 34.10”(w) x 8.50”(d) approx.95mm(h) x 865mm(w) x 215mm(d) approx.

Weight:10.9lbs/4.95kg approx. (including carry bag)(Installed graphic add weight)

Visible dimensions:83.35”max(h) x 31.50”(w)2117mm(h) x 800mm(w)

29.5”min(h) x 31.50”(w)750mm(h) x 800mm(w)

Grippa top rail attachment recommended for semi-permanent or long term use. Adhesive top rail attachment recommended for short term use.

WARNING: Always attach graphic to base and top rail before removing the locking pin. After fitting, the graphic should be left for 24 hours before use to ensure the adhesive bonds sufficiently. Opening the base will invalidate the product warranty.

Graphic tension may be re-applied or added by turning the ratchet tensioner clockwise.

Hardware

We are continually improving and modifying our product range and reserve the right to vary the specifications without prior notice. All dimensions and weights quoted are approximate and we accept no responsibility for variance. E&OE. See Graphic Templates for graphic bleed specifications.

Graphic

Shipping

Shipping dimensions - ships in one box37”(h) x 12”(w) x 5”(d)920mm(h) x 290mm(w) x 110mm(d)

Approximate shipping weight:17lbs/7.71kgshipping weight with graphic approx.

11lbs/4.95kg shipping weight without graphic approx.

11/30/11

integrated pole storage

Set-up

Secure pole(s) in the base of standTwist telescopic pole to extend 1 2 3 4Gently lean the unit back and pull the graphic up by the toprail

Graphic to top rail attachment (metal insert)

1 2 3 4

5

Leveling feet located under unit

Metal Insert

Metal Insert

Metal Insert

Peel film to expose adhesive; place metal insert from graphic rail on top back side of the graphic point

Loosen each screw from the rail using provided allen key and remove metal insert (do not remove screws)

Press down on the metal insert to make sure adhesive is secure on graphic

Insert the metal insert with graphic attached into the top graphic profile rail

Tighten the screws back in place to hold metal insert and graphic with an allen key 1

Quick slide top rail attachment (plastic insert)

2 3

top slider

printed side down

Remove top slider from graphic railRemove film to expose adhesive on top slider

Align and apply to top slider on the top front of graphic

3

74

8

5 6

Line the bottom of the back of graphic print with adhesive tape on white leader strip

Slowly retract the graphic back into the base

Once aligned pull adhesive tape slowly while applying pressure to graphic to adhere tape

Place interchangeable cartridge back into the outer cartridge with graphic retracted back in

Place additional masking tape to the back of the graphic for extra protection

Remove pin while holding onto the graphic so the graphic does not retract back in quickly

.

1Flip open the cassette door

Graphic to base attachment

2Carefully remove the cassette from the outer cartridge4Insert graphic onto graphic rail

top rail slider

graphic back

graphic front