Metal Solutions

for the Building

Envelope

The IMETCO Value-AddThe IMETCO Value-Add

• High quality, attractive systems that offer a lifetime of protection

• Well-established company with decades of proven performance

• Metal roofing specialists

– Assist with system design, specifications and field inspections

• Products made here in Atlanta

– Reduce freight costs for local jobs

– Accommodate LEEDs material origin criteria

– Field support just a phone call away

• A wide range of high-performance systems

– Engineered for longevity and incomparable aesthetic appeal

• Engineering team on staff

– Provides project-specific shop drawings and design support

• Specialty manufacturing makes more creative and unique designs possible

– Curving– Tapering – Proprietary mechanical

finishes– On-site fabrication

Series 300®Series 300®

• More than 20 years of proven performance

• Symmetrical design

• Structural and/or architectural applications

• Rigorously tested

– Water-tight– Resists hurricane-force

winds

• Ideal for curving and tapering

• Unlimited thermal movement

• Custom trim and flashing details available

• Slopes as little as 1/2:12

• A variety of panel widths, materials, gauges and colors

• Install over open purlins or solid substrate

• Heavy 16-gauge one-piece clips

• Factory-applied sealant

• Mechanically seamed

• Fully warranted

Symmetrical SeamSymmetrical Seam• Design flexibility

• Quick and easy to install– Start anywhere on the

roof and proceed in either direction

• Modifications– Additions can installed

with little or no impact to existing structure

• Reduced waste– Both sides of the panel

can be used at any place

• Easy to replace – Individual panels can be

removed and replaced

Curved PanelsCurved Panels• Design considerations

– Tightness of radius– Slope at ridgeline– Water-tightness

• Steel or aluminum

• Structural or architectural application

• Factory or field curving

S-Curve Panels from IMETCOS-Curve Panels from IMETCO• Unique specialty

curving for structural panels

– Complex curvatures (change in radius)

– Concave (reverse) radius– Curved to flat– S curves (convex to

concave)

Tapered PanelsTapered Panels• Conical shaped

buildings

• Most costly manufacturing operation

• Factory formed

• Now available in virtually any length

Snap-Lok™Snap-Lok™• 1¾-inch standing seam

provides excellent wind uplift resistance

• Simple one step installation - no seaming tools required

• Heavy duty 18-gauge UL concealed clips allow thermal movement

• ⅜-inch clearance between panel and substrate promotes ventilation

• 10-, 12-, 16-, and 18-inch widths

• Weather-tight internal gutter/anti-siphon feature

• Slopes as little as 1½:12

• Panel striations - standard

• Factory-applied sealant

• Installed over open purlins or solid substrate

• Available in 22 or 24 gauge steel (including stainless), and .032 aluminum

• Fully warranted

Perm-Loc 1.0 and 1.5Perm-Loc 1.0 and 1.5

• Interlocking standing seam - no separate cap

– Perm-Loc 1.0 is available in 13- and 21-inch widths– Perm-Loc 1.5 is available in 12- and or 18-inch widths

• Factory-installed sealant in seam

• Heavy 18-gauge UL approved clips

• Available in:

– 1- and 1½-inch seams– 22 or 24 gauge

G90 galvanized steel– 22 gauge AZ55

Galvalume®– .032 and .040

aluminum

Twin-LocTwin-Loc

• Mechanically seamed structural design

– Twin-Loc 1.5 available in 11- and 17-inch widths– Twin-Loc 2.0 available in 12-, 16- and 18-inch

widths

• Testing and Approvals

– UL-580 Class 90 windstorm rating– ASTM E-283 air infiltration resistance– ASTM E-331 water penetration resistance– ASTM E-1592

• Available in:

– 22 and 24 gauge steel

– .032 and .040 aluminum

SS PanelsSS Panels• Can be curved

or tapered

• Ideal for change-of-plane detailing

• Symmetrical design

• Factory-applied sealant in the seam cap

• Custom trim and flashing details available

• 3:12 minimum slope

• Solid substrate

– 30 lb. minimum felt underlayment

• Available in:– 14½-inch and 22½-inch

panel widths– 24 and 22 gauge steel,

and .032 aluminum

IMETCO Soffit SystemsIMETCO Soffit Systems

• Available in lengths up to 25'

• Panels can be vented for air circulation

• Panels are attached with concealed fasteners at 24" maximum on center

• Available in:– .032 aluminum in

IMETCO’s standard colors

–Also available in .025 aluminum in Regal White

Latitude Series Wall PanelsLatitude Series Wall Panels• High-performance

exterior metal wall system

• Provides dynamic visual impact

• Proven resistance to wind uplift and water infiltration

• Suitable for horizontal and vertical applications

• Concealed clips

• Wide variety of profiles– Mix and match for accent

• Available in 12- and 16-inch coverage– Each creates a 4-inch o.c.

pattern

• Precision-edge factory mitered corners available

PermWall Flush Wall Panel SystemPermWall Flush Wall Panel System• High performance flush metal wall panel

systems – 1.0 and 1.5

• Engineered for strength and longevity

• Designed for the beauty of smooth consistency

• Concealed fasteners secure virtually invisible vertical seams

• Tested and warranted to IMETCO’s rigorous performance and quality standards – 10-year weather-tight warranty

• Available in a wide range of colors and gauges

• Custom-formed by IMETCO’s talented metal craftsmen

Concealed Clip Wall PanelsConcealed Clip Wall Panels• PanWall 130

– Flush, seamless look – Easy one-step

installation– Installed over solid

substrate of furring channels

– Can be used for curved parapet walls, curved soffits and gable ends

– 13-inch standard panel width • 21-inch width available

– Distinctive stiffening plateaus

– Custom insulation adhered to panel

– Available in 24 gauge steel and .032 aluminum

• FW-120

– Interlocking seams conceal fasteners

– 12-inch standard panel width, nominal 1-inch depth

– Profile choices include• Smooth, solid surface

with no stiffening grooves

• Two stiffening V-grooves equally spaced

– Available in 24 gauge steel and .032 aluminum

Exposed Fastener Wall PanelsExposed Fastener Wall Panels• Cor-Pan

– 32-, 35½-, and 37⅜-inch coverage widths

– Two corrugated panel systems • ⅞-inch deep

longitudinal ribs, spaced 2.67 inches on center

• ½-inch deep longitudinal ribs, spaced 2.67 inches on center

– Available in 22 and 24 gauge steel, and .032 aluminum

• R-Panel

– 36-inch coverage width– Ribs are 1-3/16 inches

deep, and 12 inches on center

– Available in 22 and 24 gauge steel, and .032 aluminum

• 7.2 Rib

– 36-inch coverage width– Trapezoidal style

• 1½-inch longitudinal ribs spaced 7.2 inches on center

– Available in 22 and 24 gauge steel, and .032 aluminum

PerformaEdge Fascia and CopingPerformaEdge Fascia and Coping

• Engineered for performance and maximum wind resistance

– Creates a seamless, color-matched finished appearance

– Provides exceptional protection against wind and weather

• IBC 2003 Code compliant

• Fully tested per ANSI/SPRI ES-1 standards

• “Snap-on” design simplifies installation and reduces labor costs

• 10- and 12-foot standard lengths

• .040, .050, .063 .080 & .125 aluminum, as well as 22 and 24 gauge steel

• Miters and transitions can be fabricated at any angle to meet specific project conditions

• Concealed splice plates

– Unlimited thermal movement – Weather-tight seal

• Pre-punched fastening holes ensure proper, and quick, installation

• 16-gauge galvanized steel cleat for exceptional uplift performance

• 20-year blow-off and weather-tight warranties

DryDek Ice and Water BarrierDryDek Ice and Water Barrier

• High temperature commercial-grade underlayment

– Tolerates 260+°f

• Resists punctures and tears

• Resists exposure for 150 days

• Withstands thermal movement

• 100% SBS-modified

• Reinforced with polyester and fiberglass

• Great for re-roof application!

• Self-adhering, easy-to-apply

• Self-sealing around fasteners

• Remains water-tight under load stress

• Meets ASTM D-1970 standards

• FBC-approved

• Packaged in heavy-duty corrugated box

IMETCO AccessoriesIMETCO Accessories

• IMETCO offers a wide range of roofing accessories

– Gravel stops, gutters and downspouts are all formed by our talented craftsmen

– Matching fasteners are available in any of our standard, premium or designer colors, as well as custom colors

– Head, hip and valley closures

– A wide variety of clips

– Trim– Edge stiffeners– Snow guards

and snow retention systems

Materials and FinishesMaterials and Finishes

• Materials–Aluminum–Steel–Stainless Steel –Copper–Zinc–Exotic Metals

• Coatings–Slow corrosion–Enhance aesthetics

• Mechanical Finishes–Mesas, striations, embossing –Pencil beads

• TextureMatteTM stainless steel

Onyx Black

Glacier Gray

United ZincUnited Zinc• Lifespan measured

in decades

• The ONLY domestically produced zinc roofing currently available

• 5-mil plastisol protective back-coating

• Forms a beautiful natural blue-gray patina– Self-healing nature can make scratches disappear

over time

• Non-corrosive and environmentally-friendly– Zinc resists mold, mildew &

fungus, but its runoff is “clean”

• High recycled content– More than 30% comes from

recycled/secondary zinc

Color Color

Signature Collection PatternsSignature Collection Patterns

Engineering ServicesEngineering Services• Experts in metal roofing design,

engineering, testing and code compliance

• IMETCO engineers are ready to assist you at every stage of your project with:

– Design support and specialty engineering

– Product testing and code compliance support

– Custom shop drawing packages and installation guidelines

• Ongoing research and development

• Ensures the quality, performance and value of IMETCO's product line

Wind Uplift Requirements Wind Uplift Requirements • Design Requirements for Metal Roofing

– ASCE 7 specifies the standard for determining design loads

– Establishes proper method for evaluating roofing systems

• A wind uplift analysis should be conducted to help determine

– Proper Clip Spacing– Gauge of Panel System– Width of Panel– Panel Profile

Wind Uplift Analysis (ASCE 7)Wind Uplift Analysis (ASCE 7)• Geographic Location

– Determines expected maximum wind speed

• Mean Roof Height

– The higher the roof, the higher the wind pressures

• Exposure Condition

– Characteristics of ground surface• City centers and suburbs provide more wind shielding than

open fields or coastal locations

• Occupancy Classification

– Essential facilities (schools, fire departments, hospitals, etc.) are more vital than others

• Roof Geometry

– Slope (steep vs. flat) and shape (curved barrel vs. hip & valley) affect wind pressure

• Other Factors

– Topography, wall openings, parapets, etc.

TestingTesting

Shop Drawing PackagesShop Drawing Packages• Thoroughly engineered and

project-specific

• Produced in-house by IMETCO engineers–P.E. stamp available for any state

• Addresses design and installation challenges

• Ensures optimum product performance, proper installation and code compliance

• Reduces potential liability

Project ManagementProject Management• Assist with each stage of your

project

• Single point of contact for information about your order

• Can answer any question regarding–Panel selection–Pricing and quantities –Lead times and delivery

System Details and InstallationSystem Details and Installation

Long PanelsLong Panels• Convenient

and cost beneficial

• Reduce potential for leaks by eliminating unnecessary end laps

• Can be factory formed and shipped up to 85 feet long

• Can be field formed to unlimited length

On-Site Roll FormingOn-Site Roll Forming

• Full-service, factory-quality forming equipment

– 16 roll stations– Tension leveling

• Operated on-site by IMETCO fabrication experts

• Shipped with de-coiler on 45-foot trailer

• Factory formed battens

• Factory installed seam sealant

• UL and FM continuous quality assurance programs

On-site Roll FormingOn-site Roll Forming• IMETCO provides:

– Operator & assistant (including T&E)

– Generator– 140 ft. spreader bar available for

rental

• Contractor responsibilities:

– Freight for equipment (both ways), coils, seam caps, and accessories

– On-site manpower• One man per 15’ panel length

– Flat manufacturing area• Panel length plus 60 feet on ground

– 10,000 lb lift to handle coil and maneuver forming equipment

– Flexible schedule• 2-3 week window to schedule

equipment and operators

FactoryFactory

Thank You!