important information from: peter andersonfrom: peter anderson tel: fax: email: 085 78362 (0207 557...
TRANSCRIPT
HQ Acceptance ServicesEngineeringDirectorate40 Melton StreetLondonNW I 2EE
IMPORTANT INFORMATIONFOR USERS
From: Peter Anderson
Tel:Fax:Email:
085 78362 (0207 557 8362)085 79013 (0207 557 9013)[email protected]
Date: 02.02.06
Product Acceptance Advice NoteThis advice note provides appropriate background information and any specific action that may be required
in accordance with the attached certificate. It will enable you to meet your obligations in meeting the
requirements of the Company procedure RTILS/P/029.
Backgroundl Reason for IssueCertificate re-issued to include PADScatalogue number 086/009178 - see page 2 of the AcceptanceCertificate
Network Rail action
Deficienciesinperformance affectingthe accepted functionality of the product or safety integrity identifiedby users of the product shall be reported in writing to Network Rail, HQ Acceptance Services.
Network Raillnlrastructure Lt<!Registered Office 40 Melton 5tre,.. London NW I 2EE Registered in Engtandand ~es No. 2904587 www.networknil.co.uk
- -- ----
Certificate Ref. Issue Product
PA05/02706 2 LEDSearchlightMedium RangeSignalColour Light Module.
ManufacturerDorman TrafficProducts LtdRufford Road,Crossens, Southport. PR98LA
Telephone: 0 1704 220911I Fax:01704 232221 I Email:salescw.dorman.co.uk
NetllVork Rail
~JHQ Acceptance Services
Network Rail
40 Me/ton Street
London. NW I 2EE
Certificate of Acceptance
Certificate No:
Effective date:
PA05/02706
02.02.06
Issue: 2 Date: 02.02.06
Page 1 of 4
Product: LED Searchlight Medium Range Signal Colour Light Module.
Manufacturer: Dorman Trafflc Products Ltd
Rufford Road,Crossens,
South port. PR9 8LA
The product above is accepted for use on the Network Rail infrastructure within thedefined scope of acceptance and any specific conditions in the certificate.
Scope of Acceptance
Accepted for use on Network Rail'sinfrastructure as a MediumRangeColour LightSignalgenerally in accordance with RT/E/S/l0062. Maybe operated from IIOVac or 120Vdc (nominal)supplies.
SPECIFIC CONDITIONS (Manufacturer/Supplier)· This acceptance covers the signalmodule only. Modules may be supplied in housings
covered by Certificate of Acceptance PAOS/O1873to form a complete signalhead.· All"Right Hand" modules must be supplied with a conspicuous labelattached indicating
that they are only for use in signals mounted to the riS!:htof the centre of the running line.· Any deficiency affecting the product quality, functionality and safety integrity shall benotified in writing within 48 hours (including corrective action undertaken or proposed)to Network Rail HQ Acceptance Services.
· Manufacturers/Suppliers are responsible for ensuring that they are in possession of thelatest relevant standards and/or drawings, and for ensuring that their products arecompliant.· Any proposed change to the product configuration (to the actual product or itsaDDlication) shall be Dut forward in writinS!:to Network Rail, HQ AcceDtance Services.
Andrew Simmons BSc, CEng, FlEE,FIRSEProfessional Head of Signal Engineering
NetWork Rail Infrastructure Limited Registered Office 40 Meiton Street London NW I 2EE Registered i~ Englandand Wales No. 2904587 www.neJ.orkrail.co.uk
-----
------------
Network Rail-~~
Certificate of Acceptance
Certificate No:
Effective date:
PA05/02706
02.02.06
Issue: 2 Date: 02.02.06
Page 2 of 4
SPECIFIC CONDITIONS (Users)· Users are responsible for ensuring compliancewith the followingconditions. Ifa conditionis not understood guidance must be sought from the Product Acceptance Specialist.· Only to be used where application has been considered by a SignalSightingCommitteeand Category 2 performance at 12 Y2°offaxis viewing(or Category 4 at 100off axis) isacceptable.
· Allstaff required to use the equipment shallbe suitablytrained and competent to do so.· Equipment shallbe maintained in accordance with the manufacturer's recommendations.
PRODUCT CONFIGURATION - SIGNAL MODULES
Issued by HQ Acceptance Services, Engineering Directorate, Network Rail, 40 Melton Street, London NWI 2EE
Part No. Description PADS No.
CLMM/3RYG/I P/LU LED Medium Range Colour Light Signal Module, 3 aspect, Red, 0861009170
Yellow, Green, I1OVac 1 120V dc, lamp proved, left upperquadrant
CLMM/4RYGII P/LU LED Medium Range Colour Light Signal Module, 4 aspect, Red, 0861009171
Yellow, Green, 11OVac 1 120V dc, lamp proved, left upperquadrant
CLMM/4Y--11P/LU LED Medium Range Colour Light Signal Module, 4 aspect, 0861009172
Yellow, II OVac 1 120V dc, lamp proved, left upper quadrantCLMM/3RYG/IP/RU LED Medium Range Colour Light Signal Module, 3 aspect, Red, 0861009 173
Yellow, Green, 1I OVac 1 120V dc, lamp proved, right upperquadrant.
CLMM/4RYG/I P/RU LED Medium Range Colour Light Signal Module, 4 aspect, Red, 0861009 174
Yellow, Green, II OVac 1 120V dc, lamp proved, right upperquadrant
CLMM/4Y--/1 P/RU LED Medium Range Colour Light Signal Module, 4 aspect, 0861009175
Yellow, IIOV ac 1120V dc, lamp proved, right upper quadrantCLMM/4RYG/I P/BH LED Medium Range Colour Light Groundffunnel Signal Module, 086/009 176
4 aspect, Red, Yellow, Green, 11OVac 1 120V dc, lamp proved,bottom half quadrant
CLMM/4Y--/1 P/BH LED Medium Range Colour Light Groundffunnel Signal Module, 086/009177
4 aspect, Yellow, IIOV ac 1120V dc, lamp proved, bottom halfquadrant
CLMM/3RYG/I P/BH LED Medium Range Colour Light Groundff unnel Signal Module, 086/009178
3 aspect, Red, Yellow, Green, 11OVac 1120V dc, lamp proved,bottom half Quadrant
Certificate of Acceptance
Certificate No:
Effective date:
PA05/02706
02.02.06
Issue: 2 Date: 02.02.06
Page 3 of 4
PRODUCT CONFIGURATION - ASSEMBLED HEADS
Issued by HQ Acceptance Services, Engineering Directorate, Network Rail, 40 Melton Street, London NW I 2EE
Part No. Description PADS No.
CLMH/RYGYII P/LU LED Medium range Colour Light Signal Head, 4 0861009040
Aspect, Red Yellow Green Yellow, 11OVLampproved. Left Upper Quadrant.
CLMH/3RYG/I P/LU LED Medium range Colour Light Signal Head, 3 0861009041
Aspect, Red Yellow Green, 11OVLamp proved. LeftUpper Quadrant.
CLMH/SRYG/I P/LU Short, LED Medium range Colour Light Signal Head, 0861009042
3 Aspect, Red Yellow Green, I1OVLamp proved.Left Upper Quadrant.
CLMH/RYGY/IP/RU LED Medium range Colour Light Signal Head, 4 0861009043
AspeCt, Red Yellow Green, 11OVLamp proved. RightUpper Quadrant.
CLMH/3RYG/I P/RU LED Medium range Colour Light Signal Head, 3 0861009044
Aspect, Red Yellow Green Yellow, 11OVLampproved. Right Upper Quadrant.
CLMH/SRYGII P/RU Short, LED Medium range Colour Light Signal Head, 0861009045
3 Aspect, Red Yellow Green, 11OVLamp proved.Right Upper Quadrant.
CLMH/3RYG/I P/BH Short, LED Medium range Ground Mounting Colour 0861009046
Light Signal Head, 3 Aspect, Red Yellow Green, 11OVLamp proved. Bottom Half Quadrant.
CLMH/RYGY/IP/BH Short, LED Medium range Ground Mounting Colour 0861009047
Light Signal Head, 4 AspeCt, Red Yellow GreenYellow, 11OVLamp proved. Bottom Half Quadrant.
Network Rail-~J
Certificate of Acceptance
Certificate No:
Effective date:
PA05/02706
02.02.06
Issue: 2 Date: 02.02.06
Page 4 of 4
ASSESSED DOCUMENTATION
CERTIFICATE HISTORY
DISTRIBUTION
ManufacturerDorman TrafflcProducts LtdRufford Road,Crossens,Southport. PR9 [email protected] PADS records
Mark ColeySerco RaildataLtd, [email protected]
PADS Input AgentNational Railway Supplies Ltd, [email protected]
For Information/briefing
Peter Agnew (Programme ManagerMaintenanceTechnology)[email protected]
Scott Mayle (Maintenance Technology
Analyst)[email protected]
WCRMI Eversholt Street, [email protected]
Thameslink 2000
Friars Bridge Court, LondonDeter .harman(Ci)tI2k.co. uk
Issued by HQ Acceptance Services, Engineering Directorate, NetWork Rail, 40 Melton Street, London NWI 2EE
Reference Title Date and Appliesto Cert. issue No.
AR TE ESTOO11 Amey Rail & Dorman Traffic Products Ltd Safety Case June 2002 I
(Issue I) submissionOPT /01397 Scientifics Ltd: "Report of Optical & Temp. testing July 2002 I
..........
OC 0062, Report Report of ReadabilityTests on Dorman Traffic 20 May I02, Issue I Products LEDMediumRangeColour LightSignal 2005
Darley Moor, 09 May2005
Issue Number Date Issue HistoryI 21.09.05 First accepted for use.2 02.02.06 Addition of 086/009178 to Product Configuration.