in the knifemakers who hot - pohl · pdf filethe knifemakers who will be hot the big ... tacts...
TRANSCRIPT
MARCH 2015www.blademag.com
NEW IN2015
THE KNIFEMAKERS WHO WILL BE HOT
THE BIGFLIPPERS
HOW SHARP IS80CrV2 STEEL?
FnL1
04 0120
01 J
UYrVyB
QdWJsa
WNhdG
lvbnMsI
EluYyA
o 02 S
W9sYS
BkaXZp
c2lvbikP
R3JlZ29
yeSBL
03 cnVl
Z2VyAF
KoW8QE
MTAuN
AI4MA
ExBVVQ
04 Q
y1BDD
A3NDQ
3MDUw
MjUxNw
A=
74470 502510 7
03
Display until January 26, 2015
US $5.95
SMALL AXES GOHEAD-TO-HEAD
REBORN BOWIE OFLIVER-EATING JOHNSON
THE MONGOOSEBY DANIELGALLOWAY AND LEE WILLIAMS ON E TOON E TOWATCH
KNIFE IVORY PRIMER:PAST, PRESENT, FUTURE
OLD SCHOOLPOCKETKNIVES
01_0315BladeCoverUS.indd 1 12/2/14 10:21 AM
86 BLADE MARCH 2015
FA C T O RY F O C U S | BY STEPHEN GARGER
ALL PHOTOS COURTESY OF POHL FORCE KNIVES
POHL FORCE KNIVES
Dietmar Pohl, founder of Pohl Force Knives,
holds the Quebec Outdoor One fi xed blade.
The knife is the company’s modern inter-
pretation of a model originally developed
for the U.S. Marines in the early 1950s.
Though the knife was never offi cially intro-
duced, Special Forces units reportedly used
the original during the Vietnam War. The
Quebec (top) features a 7.59-inch blade of
Sleipner stainless and a G-10 handle.
“Every knife has a story some-how,” said Phil Cookson of Pohl Force USA, the state-
side version of Dietmar Pohl’s Pohl Force Knives based in Burscheid, Germany. “For example, Dietmar has a lot of con-tacts in the German Kampfschwim-mer Naval Commandos [German Navy SEALS] and goes up to Northern Germa-ny, where he spends time talking, listen-ing and diving with them. He drew a lot of the characteristics for his Romeo Two design from those experiences.”
In addition to underwater operations, the titanium-blade Romeo Two can also serve as a pilot survival knife and for battlefi eld clearance personnel, where ti-tanium’s anti-magnetic properties make
it the right knife for explosive ordnance disposal.
“Dietmar’s a very good listener and not only listens, but tries to somehow cre-ate and turn ideas into a practical knife,” Cookson said. ”Quite a few of the designs are from his experiences with operators and knife users.”
Pohl’s initial interest in military and tactical knives can be traced to the work of the late BLADE Magazine Cutlery Hall-Of-Fame© member, Jimmy Lile. Pohl cited Lile as his “lifelong inspiration” as a result of the Rambo movies First Blood and Rambo: First Blood Part II and the Lile survival knives Sylvester Stallone used as John Rambo in those fi lms.
“I have worked in the knife industry
86-PohlForce.indd 86 12/2/14 10:42 AM
MARCH 2015 blademag.com 87
20 years now, 14 as a designer, marketing manager and product manager for two Solingen-based companies,” Pohl said. “I designed more than 100 knives that went into serial production during those years.” He is also known internationally for his books on combat and tactical knives. In 2008 he founded Pohl Force in Germany. Pohl Force USA was launched at the 2012 BLADE Show. “Even though Gil Hibben and Daniel Winkler taught me how to grind and forge a knife, I am not a knife-maker,” Pohl noted. “I am a designer.”
POHL FORCE USAattn: P. Cookson and/or S. EhingerDept. BL3Belleair, FL 33756727-468-2002www.pohlforceusa.com
SPECIALTIES: Folders and fi xed blades in a range of both higher- and lower-end tactical and outdoor styles
MSRP RANGE: $195-$516
BLADE MATERIALS: D2 tool steel, Niolox and 440C stainless, and titanium
BLADE FINISHES: Bead blast, stonewashed, powder epoxy, PVD and PTFE coatings
HANDLE MATERIALS: GRP, G-10, 6A14V titanium, canvas Micarta®
ACCESSORIES: Those refl ecting a “concept systems” approach, including knife-specifi c Kydex®, nylon and leather sheaths, shoulder harnesses, leg adapters, Cordura holsters for MOLLE vests and more in MSRPs from $9.99 to $125; also knife collector pouches
The Mike 1 outdoor version is the
most popular model in Pohl’s EOD
line. MSRP: $360. Blade steel
comes in a choice of D2 or Niolox
and the handle is 3D-CNC
milled. Blade length:
3.74 inches.
Lion Steel, winner of the BLADE Magazine
2014 Manufacturing Quality Award, makes
the knives in Pohl’s higher-end EOD line.
Dietmar Pohl (left) visits with Gino Pauletta
(right), Lion Steel founder, at the 2014
BLADE Show.
I queried him about the knives’ manu-facture and quality control.
“Because the price was an important point, we produce the Alpha, Bravo, Charlie, Lima and Romeo designs in Tai-wan, but each knife comes here to Ger-many and goes through our very strict quality control,” Pohl explained. “In 2012 we teamed up with the Maniago, Italy, based company, Lion Steel, whose knives are state-of-the-art and who received the BLADE Magazine 2014 Manufacturing Quality Award, which says everything.” Pohl Force has two product lines: the Italian-made EOD (Euro Ops Division) higher-end knives and the lower-price-point models produced in Taiwan.
“It comes down to quality control. Ev-ery knife, no matter where it’s manufac-tured, is examined by Dietmar personally before it goes out,” Cookson stressed. I was taken aback by Cookson’s claim and sought clarifi cation that Pohl looks at ev-ery knife. Dietmar told me he does. Ap-
86-PohlForce.indd 87 12/2/14 10:21 AM
88 BLADE MARCH 2015
FA C T O RY F O C U S |
parently, the process is working.“I can count on one hand the amount
of returns I’ve had,” Pohl stated proudly. “Th e people who use our knives are my customers and there’s a very personal thing going on where they can call me anytime.” Every Pohl Force knife, regard-less of product line, is serialized, recorded and comes with a signed certifi cate.
As for some of the knives’ distinctive features, Pohl pinpointed the Alpha. “It was the fi rst design for Pohl Force and the knife is so big because no operator in the world goes without gloves into com-bat,” he began. “I also use slot screws for the handle because, although Torx screws
look more sexy and technical, they’re not practical if you want to maintain your knife in the desert.”
Both Pohl and Cookson emphasized that Pohl Force also designs and provides accessories refl ecting, as Cookson noted, that “Pohl likes to think in concept sys-tems.” For example, tactical accessories include knife-specifi c Kydex® sheaths, shoulder harness systems and Cordura holsters for MOLLE vests.
Blade steel depends on the product line. Along with the aforementioned titanium, 440C stainless is standard for the Alphas, with D2 and Niolox used in the EOD of-ferings. “Niolox is something Lion Steel
In addition to underwater operations, the titanium-blade Romeo Two also serves as a pilot
survival knife and for explosive ordnance disposal. Other features include a GRP handle and
PVD blade coating. Overall length: 9.84 inches. The Kydex® sheath includes a MOLLE nylon
adapter. MSRP: $340.
The Alpha Two (top) and Bravo One front-
lock folders feature blades of bead-blasted
440C stainless and GRP handles. Respective
inch blade lengths and MSRPs are 4.44 and
3.26 and $240 and $195. Inset at the 2014
BLADE Show is Dietmar Pohl with ABS master
smith Daniel Winkler, the latter whom helped
teach Dietmar how to forge knives.
86-PohlForce.indd 88 12/2/14 10:21 AM
MARCH 2015 blademag.com 89
uses extensively and they have a lot of experience with—a tool-grade stainless with a Rockwell of 58-59 HRC and excel-lent anti-corrosion,” Cookson explained. “We fi nd it applies to military and law en-forcement people who oft en work in high-moisture environments and do not want to be constantly maintaining their tools.”
Th e Taiwan-manufactured knives come with a GRP (glass-fi ber-reinforced plastic) handle, while the EODs are avail-able in G-10 and canvas Micarta®. Th e manufacturer’s suggested retail price for the EOD line’s most popular model, the Mike 1 outdoor version with a polished blade, is $360. Th e survival version with a Niolox blade and PVD coating is $390.
As for the future of Pohl Knives, Diet-mar stressed there are no plans to work toward radical growth. “We want to be recognized as the small company with specialized products, like Chris Reeve Knives,” he noted. “Chris belongs to the very small group of people in the knife industry that I highly admire, and Daniel Winkler also belongs to this group.”
Cookson outlined the company’s phi-losophy. “We don’t fl ood the market with new designs, we tend to take models out and introduce them so the customer isn’t
overwhelmed,” he said. “Our dealers are Blade HQ, KnifeCenter and White Mountain Knives, along with us directly, and the pricing is consistent so you can go to the dealer you like.”
Pohl Force USA recognizes the uphill battle in establishing itself in America. “Th e knife community is quite critical and you have to earn respect,” Cookson concluded. “You have to convince every-one that you are a credible, serious com-
pany that produces quality knives.”Th ey’ve got the knives. With that kind
of game plan, Pohl Force Knives and Pohl Force USA have their goal well within sight.
To read all about the latest knives, knife news, forums, blogs and much more, see blademag.com.
Pohl Force offers accessories refl ecting a
“concept systems” approach, including
knife-specifi c Kydex®, nylon and leather
sheaths, shoulder harnesses, Cordura hol-
sters for MOLLE vests and more.
86-PohlForce.indd 89 12/2/14 10:21 AM