increase mass flow - everest...
TRANSCRIPT
ECOChill
Increase Cash FlowIncrease Mass Flow
De-bottleneck your air compressor affordably.
Increase Process Production up to 8 Percent AnnuallyAs temperatures rise, your compressor’s performance suffers, resulting in lost time and decreased production, ultimately affecting your bottom line. We’ve developed an inlet cooling process that improves production by up to 8 percent annually, no matter the temperature.
The ECOChill SolutionECOChill is a breakthrough in suction air chilling, using our patented hybrid indirect evaporative process, called The Everest Cycle®. This integrated hybrid system delivers efficient, economical chilling in all climate conditions by increasing air compressor mass flow. This increases production by up to 8 percent annually, and the cooled air removes more than 50 percent of the entrained moisture prior to compression.
- Modular Solution Available in Less Than 6 Months
- Removes More Than 50 Percent of Entrained Moisture
- Modular System, Rated for Hazardous Areas
How it WorksWith an Everest Sciences system, warm air goes in and cool air comes out, without much energy used in between. We use a combination of indirect evaporation and mechanical chilling to cool ambient air before it enters your air compressor.
This cooler, denser air increases the overall mass flow, resulting in improved efficiency and increased production. Additionally, our automated systems provide a constant output, so your airflow – and revenue – stays consistent, no matter the air temperature.
7737 E. 42nd Place, Suite HTulsa, OK 74145
Toll Free: 800-913-6810International: 1-918-856-6977
everestsciences.com
Hot Ambient Intake Air
Wet SideChannels
Cooled Intake Air(Without Adding Moisture)
Water Flow
Secondary Air
Dry SideChannel
Simple Installation and Operation
Modular components are quick to install and require no modification to your air compressor – meaning you can get back to production quickly. Once our products are in place, you’re back in operation – they’re fully integrated with your controls and require very little user training and maintenance.
Dramatic Increase in Air Compressor Mass Flow
Suction air chilling provides a constant inlet temperature as low as 45 degrees Fahrenheit. This reduced temperature increases the mass flow and production by more than 15 percent on hot days. In many locations, this can equate to almost 8 percent more production annually.
Improved System Operations
Everest Sciences’ hybrid indirect evaporative system efficiently chills incoming air while eliminating entrained moisture early in the process. Our modular system includes two-stage air filtration to reduce the potential of contamination. The combination of moisture elimination and increased air density increases the efficiency of your air compressors, reducing energy usage per pound of air compressed.
everestsciences.com
Water Removed from Air Stream (Pounds)Daily Ammonia Production (Tons)
Base — No Cooling Cooling to 45F Percentage Increase
RESULTS BASED ON SOUTHERN US LOCATION
JA
N.
FE
B.
MA
R. M
AR
.
AP
R.
AP
R.
MA
Y
MA
Y
JU
N.
JU
N.
JU
L.
JU
L.
AU
G.
AU
G.
SE
P.
SE
P.
OC
T.
OC
T.
NO
V. N
OV
.
DE
C.
DE
C.
1,060 900,000
1,020 700,000
980 500,000
1,000 600,000
1,040 800,000
940 300,000
960 400,000
920 200,000
900 100,000
880 0
FE
B.
JA
N.